Potensi Rajawali Sdn Bhd (917572-T)(Subsidiary of OSK Property Holdings Berhad)9th Floor, Plaza OSK, Jalan Ampang50450 Kuala Lumpur, MalaysiaTel : +603-2161 3322 | +6017-206 2318

LOCATION MAP & ACCESSIBILIT Y

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Easy Access to Major Infrastructure :

§ 8 mins to KESAS Expressway

§ 15 mins to Federal Highway

§ 20 mins to ELITE Expressway

§ 30 mins to NKVE Expressway

§ 30 mins to Port Klang

§ 45 mins to K.L City

§ 50 mins to KLIA

V1 – 1Sept13

ACTUAL AE RIAL V IEW

V1 – 1Sept13Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

ACTUAL AE RIAL V IEW

V1 – 1Sept13Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

SITE PLAN

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Access Road

V1 – 1Sept13

FACT SHEET – GE NERAL INFORMATION

Project Name Gravitas

Developer Name Potensi Rajawali Sdn Bhd (917572-T)

Location Section 22 Shah Alam – 3mins to Persiaran Tengku Ampuan. 10mins to KESAS Expressway

Type of project 3 Storey Industrial Building - Link & Semi-Ds

Web URL www.oskproperty.com.my/gravitas_biz_park.php

Land Tenure 31 units – Freehold & 18 units – Leasehold

Parcel Acreage

Density

Lot 10376 : 9.976 acres (Freehold)Lot 82162 : 3.762 (Leasehold)Total : 12.738 acress (Grand Total Gross Area : 260,178sf)3.57 / acre

Semi-Ds (3 Storey)

16 units Typical lot size - 66ft x 132ft & 138ftIndicative built-up area - 5,928sq.ft.Indicative Selling Price – Average RM4.4mil

Link(3 Storey)

33 units (15 units freehold, 18 units leasehold)Typical Intermediate lot size – 33ft X 82ft to 119ftIndicative built-up area – 5,010sq.ft.Indicative Selling Price RM2.6mil – RM4.0mil (Typical lot)

Maintenance ChargesLink : RM400Semi-D : RM500*Required to pay upfront 12 months upon VP

Target Launch | Completion Jan 2014 l 2016 (30months from the date of BP*)

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer. V1 – 1Sept13

FACT SHEET – TE CHNICAL AND M&E INFORMATION

Building & GeneralSalient Points

ü 66ft Width Main Driveway & 40ft Width back land

ü Security perimeter fencing around boundary line

ü Floor loading (Semi-Ds & Link) = Ground Floor – 7.5kN/m2

= 1st & 2nd Floor – 4kN/m2

ü Optimal Ceiling Height : Semi-Ds = Ground floor 6.125m and 1st & 2nd Floor 3.5m

(floor to floor) = Total Warehousing area with height of 13.125m (43ft)

Link = Ground floor 4.2m and 1st & 2nd Floor 3.5m

= Total Warehousing area with height of 11.2m (37ft)

ü Floor Finishes – Office/Warehouse area = Power Float Cement Render

- Staircase area/Toilet/Pantry area = Ceramic Tiles

ü Wall Finishes – Office/Warehouse area – Plaster with emulsion plaint

- Toilet/Pantry area = Ceramic Tiles (up to height 2.1m)

Mechanical & Electrical Salient Points

ü Semi-D : 3 Phase Wiring Power Supply : 150amp

ü Link : 3 Phase Wiring Power Supply : 60amp (GF), Single Phase : 60amp

(1st & 2nd Floor)

ü Motorized Roller Shutter (16.5’ ht x 16.5’ wide)

ü Auto Sliding Gate point and equipment for Semi-Ds only

ü Smoke Detector & Fire alarm bell

ü Phone points and fiber optic cabling ready

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer. V1 – 1Sept13

¡ Lo w D e n s i t y w i t h o n ly 49 U n i t s L in k & Se m i -D in d u s t r y b u i ld in g 3 .57 u n i t s p e r a c re .

¡ Sm a r t layo u t c o n f igu ra t io n w i t h e m p h a s is o f wa re h o u s in g a re a – to m a x im iz e fa c to r y p ro d u c t i v i t y, p ra c t i c a l s p a c e m a n a ge m e n t a n d a l lo w in g fu t u re exp a n s io n p o s s ib i l i t y.

¡ Bu i ld in g i s ge n e ra l l y m o d e rn c o n te m p o ra r y d e s ign .

¡ I n te gra t io n o f Sh o wro o m /Of f i c e , Wa re h o u s e a n d Fa c to r y fo r f lex ib le u s a ge b a s e d o n b u s in e s s a n d o p e ra t io n re q u i re m e n t .

¡ C a te r in g to SM E b u s in e s s e s a n d u p gra d e r s t h a t re q u i re m e d iu m s i z e d b u i l t -u p a re a a n d I nve s to r s .

- Manufacturing- Franchising- Trading, Import & Export- Logist ic & Warehousing companies- Engineering based companies etc

¡ Su r ro u n d e d by a l l we l l e s t a b l i s h e d M N C s a n d m e d iu m s i z e d fa c to r ie s – p o s s ib l y t h e fe w la s t p r im a r y s i z a b le gu a rd e d in d u s t r ia l d eve lo p m e n t s w i t h in v i c in i t y o f s e c t io n 26 Sh a h A la m .

¡ Re a d y c a t c h m e n t o f s k i l le d a n d s e m i - s k i l le d wo rk fo rc e w i t h in wa lk in g d is t a n c e

PROJECT POSITIONING

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer. V1 – 1Sept13

¡ Go o d Ac c e s s a n d c o n n e c t i v i t y

¡ Bu i ld in g o r ie n t a t io n m o s t l y fa c in g : N o r t h E a s t & So u t h We s t

¡ Go o d s i te layo u t w i t h s in g le e n t r y p o in t , p e r im e te r fe n c in g – b e t te r s e c u r i t y

¡ Fu n c t io n a l , p ra c t i c a l f lo o r layo u t w i t h w id e f ro n t a ge & h igh c e i l in g in te rn a l s p a c e

¡ F lex ib le layo u t – s u i t va r io u s u s e r g ro u p s & i t ’s exp a n d a b le

¡ M o d e rn c o n te m p o ra r y fa ç a d e d e s ign . Lo n g e ave s fo r we a t h e r p ro te c t io n

¡ W id e , b r igh t & we l l ve n t i la te d a c c e s s s t a i r c a s e

¡ 66f t w id e m a in a c c e s s ro a d

¡ 66f t ’ & 40f t w id e in te rn a l ro a d s

¡ W id e f ro n t a ge

§ 40 ’ wide for Semi-D, 33 ’ wide for Link

§ High head room entry : 16.5 ’ at rear for ease of lorry passing through for both l ink & semi-D

§ 11 ’ at front for Link

¡ Bu i ld in g D e s ign

§ Building is generally modern contemporary design (Clean, simple, l iner façade treatment)

§ Long eaves for weather protect ion

BUILDING UNIQUE SE LLING FE ATURES

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer. V1 – 1Sept13

¡ D o u b le vo lu m e c e i l in g h e igh t a t re a r – exp a n d a b le

§ Semi-D units : 43ft (@eave but pending on truss depth design)

§ Link units : 37ft (@ eave but pending on depth of truss)

¡ M o to r i z e d s h u t te r s : 16 .5 ’ h t x 16 .5 ’ w id e m o to r i z e d ro l le r s h u t te r ( fo r re a r Se m i -D & l in k ) fo r

e a s e o f lo r r y a c c e s s

¡ Fro n t s h u t te r h t – 11 ’h t ( L in k )

¡ W id e m o to r i z e d s l id in g ga te : 20 ’ ( Se m i -D )

¡ Al lo wa n c e in f lo o r s la b d e s ign fo r o wn e r s to in s t a l l l i f t la te r

¡ I n s u la te d ro o f - c o o le r in te rn a l s p a c e , s a fe o n e n e rgy c o s t

BUILDING UNIQUE SE LLING FE ATURES

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer. V1 – 1Sept13

COMPOSITION BY T YPE | 3 -STOREY SE MI -D

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Property CategoryLot No. Lot Dimension

(Approx)Lot Size (sq.ft.)

Plinth Size (sq.ft)

Built-up Area (sq.ft)

3-storey Semi-D (Freehold)

1 66 x 146 (Odd Corner) 13,377.90 2,688.90 5,927.70

3 66 x 138 9,100.80 2,688.90 5,927.70

5 66 x 138 9,100.80 2,688.90 5,927.70

7 66 x 138 9,100.80 2,688.90 5,927.70

9 66 x 138 9,100.80 2,688.90 5,927.70

11 66 x 138 9,129.90 2,688.90 5,927.70

17 67 x 132 8,933.00 2,688.90 5,927.70

19 66 x 132 8,709.10 2,688.90 5,927.70

21 66 x 132 8,709.10 2,688.90 5,927.70

22 66 x 132 8,709.10 2,688.90 5,927.70

25 66 x 132 8,709.10 2,688.90 5,927.70

27 66 x 132 8,709.10 2,688.90 5,927.70

29 66 x 132 8,709.10 2,688.90 5,927.70

31 66 x 132 8,709.10 2,688.90 5,927.70

33 66 x 132 8,709.10 2,688.90 5,927.70

35 80 x 132 (Odd Corner) 9,682.90 2,688.90 5,927.70

V1 – 1Sept13

COMPOSITION BY T YPE | 3 -STOREY L INK

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Property CategoryLot No. Lot Dimension (Approx) Lot Size

(sq.ft.)Plinth Size

(sq.ft) Built-up Area

(sq.ft)

3-storey Link (Freehold)

1 72 x 120 (Odd Corner) 7,371.70 6,921.90 13,369.30

2 72 x 82 (Odd Corner) 4,177.00 4,177.00 6,930.50

3 33 x 116 3,912.30 3,393.70 5,912.602A 33 x 82 2,705.00 2,705.00 5,009.805 33 x 112 3,777.80 3,259.20 5,512.306 33 x 82 2,705.00 2,705.00 5,009.807 33 x 108 3,644.40 3,125.70 5,644.608 33 x 82 2,705.00 2,705.00 5,009.809 33 x 104 3,510.90 2,992.30 5,244.40

10 33 x 82 2,705.00 2,705.00 5,009.8011 33 x 100 3,376.40 3,376.50 5,896.4013 33 x 96 3,241.90 3,242.00 5,495.10

22A 33 x 82 2,705.00 2,705.00 5,009.8026 33 x 82 2,705.00 2,705.00 5,009.80

28 40 x 82(Odd Corner) 3,175.30 3,175.20 5,751.20

V1 – 1Sept13

COMPOSITION BY T YPE | 3 -STOREY L INK

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Property CategoryLot No. Lot Dimension

(Approx)Lot Size (sq.ft.)

Plinth Size (sq.ft)

Built-up Area (sq.ft)

3-Storey Link (Leasehold)

12 33 x 82 2,705.00 2,705.00 5,009.8012A 33 x 82 2,705.00 2,705.00 5,009.8015 33 x 87 2,946.00 2,946.00 5,732.9016 33 x 82 2,705.00 2,705.00 5,009.8017 33 x 83 2,811.50 2,811.50 5,331.5018 33 x 82 2,705.00 2,705.00 5,009.8019 33 x 83 2,735.20 2,735.20 5,102.4020 33 x 82 2,705.00 2,705.00 5,009.8021 33 x 86 2,800.80 2,800.80 5,297.1023 33 x 88 2,872.90 2,872.90 5,513.4025 33 x 90 2,945.00 2,945.00 5,729.7027 33 x 92 3,017.10 3,017.10 5,948.1029 33 x 94 3,089.20 3,089.20 6,162.2031 33 x 97 3,161.30 3,161.30 6,380.6033 33 x 97 3,221.50 3,221.50 6,559.3035 33 x 97 3,228.00 2,705.00 5,009.8037 33 x 97 3,228.00 2,705.00 5,009.80

39 53 x 97 (Odd Corner) 5,229.30 4,382.50 8,115.20

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

SPECIFICAT ION (SEMI -D INDUSTRIAL BUILDING)

Structure : Reinforced concrete frame and slabWall : Cement sand brick / Acotec panelRoof : Metal deck roofing c/w insulationCeiling

Office & Toilet Only : Suspended gypsum board / Skim coat with paintWindows : Aluminium framed window Doors : Motorised Roller shutter / Flush doorLocks : Quality locksetFloor Finishes

Ground Floor, 1st Floor, 2nd Floor : Power float finishedToilet, Pantry & Surau : Ceramic tilesStaircase : Cement screed with nosing tilesOther Areas : Cement screed

Wall FinishesToilet : Ceramic tiles to ceiling heightPantry : Ceramic tiles to 1.5m heightOther Areas : Plaster & Paint

Sanitary Installation:Squatting WC : 3 nosWC : 3 nosBasin : 6 nosToilet paper holder : 6 nosShower rose : 3 nosSoap holder : 3 nosTap : 6 nosBib Tap : 9 nos

Electrical Installation:Light point : 53 nos13 amp power point : 36 nosFiber wall socket : 1 no External Gate : 1.8m ht. auto mild steel slding gateFencing - Front : 1.8m ht. brick wall and mild steel grille fencingFencing – Side / Rear : 1.8m ht. brick wall and wire mest fencing

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

SPECIFICAT ION (L INK INDUSTRIAL BUILDING)

Structure : Reinforced concrete frame and slabWall : Cement sand brickRoof : Metal deck roofing c/w insulationCeiling

Office & Toilet Only : Suspended gypsum board / Skim coat with paintWindows : Aluminium framed windowDoors : Motorised Roller shutter / Flush doorLocks : Quality locksetFloor Finishes

Ground Floor, 1st Floor, 2nd Floor : Power float finishedToilet & Pantry : Ceramic tilesStaircase : Cement screed with nosing tilesOther Areas : Cement screed

Wall FinishesToilet : Ceramic tiles to ceiling heightPantry : Ceramic tiles to 1.5m heightOther Areas : Plaster & Paint

Sanitary Installation:Squatting WC : 3 nosWC : 3 nosBasin : 8 nosToilet paper holder : 6 nosShower rose : 3 nosSoap holder : 3 nosTap : 8 nosBib Tap : 6 nos

Electrical Installation (Typical Units only):Light point : 41 nos13 amp power point : 33 nosFiber wall socket : 3 nos

V1 – 1Sept13

3 STOREY - SE MI -D INDUSTRIAL BUILDING

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Spacious & Modern Contemporary Design for Practical Usage

V1 – 1Sept13

SEMI-D - Ground Floor

Typical Lot Size- Approx. 66ft x 132ft- 8,709sq.ft. / 9,101sq.ft.

Plinth Size- Approx. 40ft x 67ft- 2,689sq.ft.

Total BUA (3 Floors)- 5,927.7sq.ft.

Ground Floor BUA- Approx. 2,688.9sq.ft.

Option for lift installation

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

40.9’

66.9’

25’

SE MI-D INDUSTRY BUILDING – SE CT ION & E LEVATION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

SEMI-D - 1st Floor

Total BUA (3 Floors)- 5,927.7sq.ft.

1st Floor BUA- Approx. 1,619.40sq.ft.

40.9’

66.9’

26.1’

14.5’

SE MI-D INDUSTRY BUILDING – SE CT ION & E LEVATION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

SEMI-D- 2nd Floor

Total BUA (3 Floors)5,927.7sq.ft.

2nd Floor BUA- Approx. 1,619.40sq.ft.

40.9’

66.9’

26.1’

14.5’

SE MI-D INDUSTRY BUILDING – SE CT ION & E LEVATION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

SE MI -D INDUSTRY BUILDING – SE CT ION & E LEVATION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

SE MI -D INDUSTRY BUILDING – SE CT ION & E LEVATION

Typical Front Elevation

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Typical Rear Elevation

43’

SE MI-D INDUSTRY BUILDING – SE CT ION & E LEVATION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Typical Section A-A

45’ 50’11.5’

20’

50’

SE MI-D INDUSTRY BUILDING – SE CT ION & E LEVATION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Typical Section B-B

SE MI-D INDUSTRY BUILDING – SE CT ION & E LEVATION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Typical Side Elevation

SE MI-D INDUSTRY BUILDING – SE CT ION & E LEVATION

V1 – 1Sept13

3 STOREY - L INK INDUSTRIAL BUILDING

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Wide Frontage Provides Better Flexibility

V1 – 1Sept13

Link - Ground Floor

Typical Lot Size- Approx. 33ft x 82ft- 2,705sq.ft

Total BUA (3 Floors)- 5,010sq.ft.

Ground Floor BUA- Approx. 2,705sq.ft.

Option for lift installation

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

33’

82’

L INK INDUSTRY BUILDING – SE CTION & E LEVAT ION

V1 – 1Sept13

Link - 1st Floor

Total BUA (3 Floors)- 5,0109.8q.ft.

1st Floor BUA- Approx. 1,152.3sq.ft.

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

33’

35’

L INK INDUSTRY BUILDING – SE CTION & E LEVAT ION

V1 – 1Sept13

Link - 2nd Floor

Total BUA (3 Floors)- 5,009.8sq.ft.

2nd Floor BUA- Approx. 1,152.3sq.ft.

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

35’

33’

L INK INDUSTRY BUILDING – SE CTION & E LEVAT ION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

L INK INDUSTRY BUILDING – SE CTION & E LEVAT ION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Typical Front Elevation

L INK INDUSTRY BUILDING – SE CTION & E LEVAT ION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Typical Section A-A

11.5’

13.7’

37’40’

L INK INDUSTRY BUILDING – SE CTION & E LEVAT ION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Typical Rear Elevation

L INK INDUSTRY BUILDING – SE CTION & E LEVAT ION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Typical Side Elevation (Corner Unit)

L INK INDUSTRY BUILDING – SE CTION & E LEVAT ION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

Typical Side Elevation (End Unit)

L INK INDUSTRY BUILDING – SE CTION & E LEVAT ION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

L INK INDUSTRY BUILDING – SE CTION & E LEVAT ION

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

SAMPLE FE NCING MATERIAL

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

OWNERSHIP PACKAGES

§ Earnest Money

§ Developer absorbs :- SPA : Legal fee & Disbursement****- Loan : Legal fee Only.****

• Bumi Discount : 5%

**** Terms & Condition applies – only applicable to panel banks and solicitors*** Terms & Condition applies – Referral must register and approved prior to any sales presentations. Not applicable for agent sales.** Terms & Condition applies – Definition of Business Associates : Panel bankers, existing suppliers, consultants, contractors and etc* Terms & Condition applies – Refer to BGB & BRP guidelines. Remarks : Buyer can choose either one above only.

Per Unit Forfeiture Amount (Stakeholder) Forfeiture Amount

Semi-D & Link Industrial Building RM30,000 RM1,000

Cheque issue to Ho, Loke & Koh

RM6,000

TypeEarly Bird Rebate

(1st 10% & 2nd10%)

Buyer Get Buyer (BGB) *

Buyer RepeatPurchase (BRP) *

Business Associate**

Link – LH 5% + 5%

RM20,000 RM40,000 RM30,000Link – FH 5% + 5%

Semi-D - FH 5% + 5%

For Early Bird & limited time only

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

PANEL E ND F INANCIERS

Banks RHB Bank Maybank Public Bank CIMB BANK

Max. Age 70 65 70 70

Max. Loan Tenure 25 years (Personnel)15 years (Company) 25 years 25 years 30 yers

Interest Rate ** BLR - 2.4% (>750k)BLR-2.2% BLR – 2.0% BBLR-2.2% BLR-2.2%

Max. Loan Margin (Ind)(Corp)

85% + 5% MRTA (Ind)75% + 5% (Commercial)

80% (1st & 2nd loan)70% (3rd loan) 85% + 5% BLDTA 85% + 5% MRTA

Min.Lock-in Period NIL 4 years 4 years 3 years

Penalty Fee NIL 2% 2% 2%

Legal Cost * Absorbed by Developer

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

BANKERS ’ CONTACT DE TAILS

Banker's Contact

RHB Bank Maybank Public Bank CIMB

Contact Person (1) Michelle / Daniel Alvin Lee Kelvyna Davis / Leo Kim WingDanny Koo / Seng Chien Yick

Contact No +603-80701831 +603-79802630 - -

H/P +6016-6300123+6012-7606468 +6017-8882829 +6012-530 1128 +6012-312 6458 / +6012-398 8469

+6016-6906966 / +6012-3362683Direct Line +603-80701831 - - -

Fax Nil +603-79813512 - -

Email michelle.yau@rhbgroup.comtan.kim.kiang@rhbgroup.com Alvin.lee@maybank.com.my ng.meisean@publicbank.com.my davis.tan@cimb.com / Kimwing.leo@cimb.com

Danny.koo@cimb.com / chienyick.seng@cimb.comPuchong Branch Jln Kelang Lama Branch Uptown Branch Puchong Branch / Jaya One Branc

V1 – 1Sept13

Disclaimer : The information contained herein is subject to change and cannot form part of an offer or contract. All renderings are artist impression only. All measurements are approximate. While every reasonable care has been taken in preparing this project brief, the developer cannot be held responsible for any inaccuracy. All the above items are subject to variations, modifications and substitutions as may be required by the Authorities or recommended by the Architect or Engineer.

PANEL SOLICITORS

Solicitor Name: Ho, Loke & Koh Shen, Eow & Partners

Address :A-1-1, Megan Phileo Promenade, 189

Jalan Tun Razak, 50400 Kuala Lumpur

B8, Taman Tunku, Bukit Tunku

50480 Kuala Lumpur

Person-in-Charge : Ms.Irene NgiamMs.Chloe Lim

Mr.Chew Yu ShenMs.Sophia Ting

Tel : +603-2166 2882 +603-6205 2311+603-6205 2322

Fax : +603-2166 4350 +603-6205 2300

Email : irene@hlk.com.mychloe@hlk.com.my

cys@shenandpartners.comtsy@shenandpartners.com

POTENSI RAJAWALI SDN BHDBANK NAME : PUBLIC BANK BERHADBANK ADDRESS : Kuala Lumpur City Main Office branch, Ground Floor, Menara Public Bank, 146, JalanAmpang, 50450 Kuala LumpurACCOUNT NUMBER : 3175539827SWIFT CODE : PBBEMYKLBANK CONTACT : 03-2176 6732

V1 – 1Sept13

V1 – 1Sept13