MAG Europe First Edition Catalog Section 3

CLARITY LINEIts whats on the inside that counts. With the RSD Clarity line, your engines inner workings are on display. Designed and cut with the form of the true working components in mind, the Clarity line adds that extra level of detail, showing off what is usually hidden.

The RSD Clarity Derby Cover is the next best thing to an open primary. Articulately machined billet aluminum frames transparent polycarbonate, giving you the same feel of a spinning clutch pack, yet is fully enclosed. Now you can show off that trick clutch.

Ever wanted to know what your air intake is doing? Now you can check it out while its sealed tightly behind transparent polycarbonate and machined billet aluminum. The RSD Clarity Air Cleaner exposes your fuel delivery system as no other intake system can.

Weve set out to expose the heart of the twin cam engine with the RSD Clarity Timing Cover. Its nely machined billet housing and transparent polycarbonate lenses show you a view of the cam gears, chain and support plate, exposing the inner workings.

RSD CLARITY AIR CLEANER

RSD CLARITY DERBY COVER

RSD CLARITY CAM COVER

Best in ltration and ow, K&N Air Filter included

Allows for viewing of internal engine components CNC machined from billet aluminum & polycarbonate Speciality coating does not allow oil and grease to adhere Proprietary abrasion and UV resistant lm to protect surface from yellowing, marring or breakage All mounting hardware included

Direct replacement for your derby cover on your OEM primary

Direct replacement for your stock Timing/Cam cover.

Backing plate promotes smooth air ow into the carb/throttle body

All mounting hardware & Gasket included

All mounting hardware & Gasket included

FINISH PART #FITMENTCLARITY AIR CLEANER

CONTRAST CUT

BLACK OPS1993 and up TWIN CAM & EVO

1994 and up XL SPORTSTER

93-2006 BIG TWIN W/S&S E/G CARB

0206-2059-BM

0206-2059-SMB

2008 and up FL, FLHT

1993 and up TWIN CAM & EVO




1993 and up TWIN CAM & EVO




CHROME

CONTRAST CUT

BLACK OPS

CHROME

CONTRAST CUT

BLACK OPS

CHROME

CONTRAST CUT

BLACK OPS

CHROME

0206-2059-CH

0206-2061-BM

0206-2061-SMB

0206-2061-CH

0206-2060-BM

0206-2060-SMB

0206-2060-CH

0206-2062-BM

0206-2062-SMB

0206-2062-CH

FINISH PART #FITMENTCLARITY DERBY COVER

CONTRAST CUT

BLACK OPS1999 and up TWIN CAM (5 HOLE)

1970-1998 BIG TWIN (3 HOLE)

0177-2007-BM

0177-2007-SMB

1999 and up TWIN CAM (5 HOLE)


1999 and up TWIN CAM (5 HOLE)


CHROME

CONTRAST CUT

BLACK OPS

CHROME

0177-2007-CH

0177-2006-BM

0177-2006-SMB

0177-2006-CH

FINISH PART #FITMENTCLARITY CAM COVER

CONTRAST CUT

BLACK OPS2001 and up TWIN CAM 88 & 96CI

0177-2003-BM

0177-2003-SMB

2001 and up TWIN CAM 88 & 96CI

2001 and up TWIN CAM 88 & 96CI CHROME 0177-2003-CH

CONTRAST CUT

BLACK OPS2001 and up FL TOURING

2001 and up FL TOURING 0177-2005-BM

0177-2005-SMB

CHROME 0177-2005-CH2001 and up FL TOURING

FEATURES FOR AIR CLEANER, DERBY COVER & CAM COVER

FL Application speci c

*FL TOURING APPLICATIONS ALLOW FOR MANDATORY 5/16 AIR GAP BETWEEN POLYCARBONATE AND EXHAUST SYSTEM

564

The new RSD Turbine Air cleaner took some major design cues from jet engines. This is the next step in intake systems for your bike. We focused our efforts on building something that would ow well while also giving a unique and timeless style that looks good on any bike.

TURBINE AIR CLEANER

Best in ltration and ow from K&N High-volume K&N Air Filter included Hidden internal crank case breathers Revolutionary backing plate

Slotted breather bolts and oil tubes are included with Big Twin applications* Not legal for sales or use on pollution controlled vehicles* All air cleaners can be used on Mikuni carbs with use of adapter part number HS42/001-K (sold separately)

FEATURES

1993 and up TWIN CAM & EVO 0206-2037-B 0206-2037-SMB

2008 and up FL,FLHT 0206-2038-B 0206-2038-SMB

1993-2006 BIG TWIN W/S&S E/G CARB 0206-2040-B 0206-2040-SMB

0206-2039-BM 0206-2039-CH

0206-2037-BM 0206-2037-CH

0206-2038-BM 0206-2038-CH

0206-2040-BM 0206-2040-CH

FITMENT B BO CHCC

1991 and up XL SPORTSTER 0206-2039-B 0206-2039-SMB

TURBINE AIR CLEANER

AIR INTAKE SYSTEMSWhen RSD set out to create an air cleaner, we wanted to make something that improved performance as well as the look of a bike. We ended up revolutionizing what an air cleaner can be in both function and aesthetics.

Offi ce: +44 (0)161 337 4390 Email: [email protected] www.mageurope.eu 565

VENTURI AIR CLEANER

The Venturi Air Cleaner features the best in ltration and ow from industry leader K&N. It is a proven high performance bolt-on part that drastically improves the looks and performance of your machine. Our revolutionary backing plate promotes smooth air ow into the carb/throttle body while also providing hidden internal crank case breathers and our tight seal oil separator insuresa clean, leak free ride. Manufactured from Billet Aluminum in the USA, the Venturi is a jewel for the side of your bike.

All RSD aircleaners feature a high-volume K&N air lter, the best in ltration and ow.

FEATURES Distinct exposed lter design Design matched to RSD wheels Built-in crank case breathers High-volume K&N Air Filter included Stainless steel wire mesh screen

Slotted breather bolts and oil tubes are included with Big Twin applications.*Not legal for sales or use on pollution controlled vehicles*All air cleaners can be used on Mikuni carbs with use ofadapter part number HS42/001-K (sold separately)

BUILT-IN CRANKCASE BREATHERS

OIL TUBES

VENTURI CHAMFER

REVOLUTIONARY BACKING PLATE FEATURED ON ALL VENTURI, CLARITY & TURBINE AIR CLEANERS

inn ltrrt atatioioon nn anaand d owow.

SLAM

JUDGE

SPEED 5

SLAM

JUDGE

SPEED 5

BOSS

RONIN

SPEED 7(DIESEL DESIGN MATCH) (DIESEL DESIGN MATCH) (DIESEL DESIGN MATCH)

BOSS

DOMINO

SPEED 7

TURBO

MISSION

SPEED 7

566

FITMENT SLAM BO SLAM CC SPEED 5 CC SPEED 5 CH SPEED 7 BODOMINO CCBOSS BO JUDGE CCJUDGE BO MISSION CC RONIN CCBOSS CC

93 and upTWIN CAM & EVO

0206-2042-SMB

0206-2042-BM

0206-2028-BM

0206-2024-BM

0206-2012-BM

0206-2015-BM

0206-2045-SMB

0206-2045-BM

0206-2000-BM

0206-2000-CH

*93-06 TWIN CAM & EVO W/S&S E/G CARB

0206-2044-SMB

0206-2044-BM

0206-2030-BM

0206-2026-BM

0206-2019-BM

0206-2020-BM

0206-2048-SMB

0206-2048-BM

0206-2017-BM

0206-2017-CH

91 and upXL SPORTSTER

0206-2041-SMB

0206-2041-BM

0206-2029-BM

0206-2025-BM

0206-2013-BM

0206-2016-BM

0206-2047-SMB

0206-2047-BM

0206-2002-BM

0206-2002-CH

2008 and up FLHT 0206-2043-SMB0206-2043-

BM0206-2027-

BM

0206-2024-SMB

0206-2026-SMB

0206-2025-SMB

0206-2023-SMB

0206-2023-BM

0206-2011-BM

0206-2014-BM

0206-2046-SMB

0206-2046-BM

0206-2001-BM

0206-2001-CH

0206-2003-SMB

0206-2018-SMB

0206-2005-SMB

0206-2004-SMB

VENTURI AIR CLEANERS

SPEED 7 CCP SPEED 7 CH TURBO CC TURBO CHSPEED 7 CC

0206-2003-BM

0206-2003-BMP

0206-2003-CH

0206-2033-BM

0206-2033-CH

0206-2018-BM

0206-2018-BMP

0206-2018-CH

0206-2036-BM

0206-2036-CH

0206-2005-BM

0206-2005-BMP

0206-2005-CH

0206-2035-BM

0206-2035-CH

0206-2004-BM

0206-2004-BMP

0206-2004-CH

0206-2034-BM

0206-2034-CH

FITMENT

93 and upTWIN CAM & EVO

*93-06 TWIN CAM & EVO W/S&S E/G CARB

91 and upXL SPORTSTER

2008 and up FLHT

VENTURI RETRO-FIT KITIf you purchased your RSD air cleaner prior to 2010 and notice any oil dripping from the bottom lter element, this FREE kit cleans up the pesky problem. We have found that some engines make excessive crankcase pressure causing them to spew a bit more oil than others up through the breathers. This retro t consists of slotted-head breather bolts and injection molded rubber tubes that t securely into the backing plate of your existing air cleaner. These parts help route any oil coming out of your breathers right back into your engine without spilling a drop.

SUPERVENTED OUTERSIf you have purchased a RSD Air Cleaner in the past, but have fallen for one of our new styles, you can now update your air cleaner to compliment your RSD wheels, by just replacing the faceplate.

AIR CLEANER ACCESSORIES

SLAM JUDGE

SPEED 5

TURBINE

SLAM

JUDGE SPEED 5

TURBINE

BOSS

RONIN

SPEED 7 TURBINE

BOSS

DOMINO

SPEED 7

TURBINE

TURBO

MISSION

SPEED 7

PART #FITMENT

2008 and up FLHT, FLHR, FLHX, FLTR 0206-4000

0206-4001

0206-4001

0206-4000

1993-2006 BIG TWIN W/ CV CARB

2002-2007 FLHT, FLHR, FLHX, FLTR W/ DELPHI EFI

0206-40012001 and up SOFTAIL, 2004 and up DYNA

OIL TUBE RETROFIT KIT

SLOTTED BREATHER BOLTS OIL TUBES

BOSS BO

TURBINE BO TURBINE B TURBINE CC TURBINE CH

BOSS CC DOMINO CC JUDGE CC MISSION CC RONIN CC SLAM BO SLAM CC SPEED 5 CC SPEED 5 CH

SPEED 7 CC SPEED 7 CCP SPEED 7 CH TURBO CC TURBO CH

0206-2032DOM-BM

0206-2032JUD-BM

JUDGE BO

0206-2032JUD-SMB

0206-2032BSS-SMB

0206-2032BSS-BM

0206-2032MIS-BM

0206-2032RON-BM

0206-2032SP5-BM

0206-2032SP5-CH

0206-2032SLM-BM

0206-2032SLM-SMB

0206-2032SP7-BM

SPEED 7 BO

0206-2032SP7-SMB

0206-2032SP7-BMP

0206-2032SP7-CH

0206-2032TUR-BM

0206-2032TUR-CH

0206-2053-SMB

0206-2053-B

0206-2053-BM

0206-2053-CH

SUPERVENTED OUTERS


PULL OVER RAIN SOCK

VELOCITY STACKVELOCITY STACKPRE-FILTER/RAIN SOCK

VELOCITY STACK - DIRECT FIT

SCRUB BAG

When you nd yourself in a sudden down pour, help prevent water from entering your engine with our new Pull Over Rain Sock. Stash it in a backpack or pocket and when the skies open, stretch it over your complete RSD air cleaner for quick & easy roadside installation, no tools required.

Compatible with ALL RSD Air Cleaners Durable polyester pre- lter is factory treated using a proprietary hydrophobic process to repel water Uniform micron openings allows air in while keeping debris .005 or larger and water out Dyno & ow bench proven to maintain current performance

Performance engines require a lot of air ow to create serious power, and that requires a high- owing induction system. Use our velocity stack to smooth the air ow into the throttle body/carbs throat for optimized fuel delivery.

RSD Logo Laser engraved onto backing plate Drilled breathers included

Uniform micron openings allows air in while keeping debris and water out.

Compatible with all RSD Velocity Stacks Filters out larger particles of debris down to .005 Hydrophobic manufacturing process repels water

Allows RSD Velocity stack to be used on any model HD with S&S Super E or G carb installed.

Bolts directly to S&S Super E or G carb No backing plate Mounting hardware and gaskets included CNC machined from billet aluminium

* Not legal for sales or pollution controlled vehicles* No ltration element included or available

* Not legal for sales or pollution controlled vehicles* No ltration element included or available* Breather system must be purchased seperately for models requiring one

While washing or storing your motorcycle, stretch our RSD Scrub Bag over your complete RSD Air Cleaner to prevent water or other debris from entering engine.

Compatible with ALL RSD Air Cleaners Made from waterproof Denier material Elastic enclosure seals out water and debris Printed RSD Logo Keep it Clean*Note: Cannot be used while engine is running. For washing and storage purposes only!

INTERNALLY MOUNTED RAIN SOCK

If you are doing a lot of wet weather riding we recommend our Internally Mounted Rain Sock. While not a necessity for riding in the rain with a RSD Air Cleaner, it can help reduce lter saturation.

Compatible with ALL RSD Air Cleaners Durable polyester pre- lter is factory treated using a proprietary hydrophobic process to repel water

Uniform micron openings allow air in while keeping debris .005 or larger and water out. Dyno & ow bench proven to maintain current performance.

hehe

dd vevehichicleslessssbleble

lllleleled.d.d.

eeehichichichichih cleslesleleses

aateltelteltelelely fy fy fy fy foroor or oro

FINISH PART #FITMENTRSD VELOCITY STACK

BLACK ANO 0204-2006-BS&S E, G CARB

CHROMES&S E, G CARB 0204-2006-CH

PART #FITMENTRSD VELOCITY STACK PREFILTER

0206-0082FITS ALL RSD V-STACKS OR3 3/4" V-STACKS

FINISH PART #FITMENT

NOSTALGIA VELOCITY STACK

BLACK ANO1999-06 TWIN CAM W/ S&S E, G CARB

CHROME 0204-2000-CH1999-06 TWIN CAM W/ S&S E, G CARB

BLACK ANO1991 and up XL W/ CV CARB, DELPHI EFI

CHROME 0204-2005-CH1991 and up XL W/ CV CARB, DELPHI EFI

BLACK ANO1993-06 BIG TWIN W/ CV CARB, 2001 and up BIG TWIN W DELPHI EFIEXCEPT 2008 and up DRESSER/HD-FL TRIKE

CHROME 0204-2001-CH1993-06 BIG TWIN W/ CV CARB, 2001 and up BIG TWIN W DELPHI EFIEXCEPT 2008 and up DRESSER/HD-FL TRIKE

0204-2000-B

0204-2001-B

0204-2005-B

FFFiillltterserss ooouout largargerer parparticcleles of deebris dd H H H HHydrydrydryd ophophophophobiobibibic mc mc mc manuanuanua facffacfacfa turturturturturingingingingg prprprproceoceoceo ss ssssss

568

BLACK LINEIn the early days HD was making a name for itself on dirtracks worldwide against Triumph, BSA, Indian and countless other brands. When it comes to big twins HD seems to of forgotten how much fun a massive V-twin can be in the dirt. That takes us to our Blackline. First we fully stripped her down and chopped off everything extra. Next was to add back to get her dirtrack ready. 19 RSD Judge wheels are the biggest attitude change along with Goodyears, a new fender and mount, RSD spring seat kit, prototype bars and gauge re-locator, among a host of other little changes and RSD parts. Dirty and narrow minded, just the way we like it.

FINISH PART #PART

BLACK LINE WISHLIST

BLACK OPS 0206-2059-SMBCLARITY AIR CLEANER

BLACK OPS 0177-2006-SMBCLARITY DERBY COVER

BLACK OPS 0177-2003-SMBCLARITY CAM COVER

BLACK OPS 0062-4012-SMBAVENGER LEVER SET

BLACK OPS 0208-2036-SMBFRONT MASTERCYLINDER CAP

BLACK OPS 0063-2036-SMBCHRONO GRIPS (CABLE)

BLACK OPS 0035-1093-SMBCHRONO FOOT PEGS

BLACK OPS 0033-1129-SMBCHRONO TOE PEG

BLACK OPS 0217-2003-TBPTRACKER BELT GUARD

BLACK OPS 0208-2029-TBPTRACKER FORK BRACE

BLACK OPS 0210-2007-SMBTRACKER GAS CAP

BLACK OPSJUDGE WHEEL - F 19X3

BLACK OPSJUDGE WHEEL - R 19X3 SPROCKET BRAKE

BLACKREAR HUB KIT - STANDARD BLACK LINE

BLACK OPSJUDGE PULLEY

JUDGE DISC - R 11.5

BLACK OPS

BLACK OPS

JUDGE DISC - F 13


TWO-PIECE ROTORSFORGED ALUMINUM PULLEY

For us, rotor design is more than just mimicking the look of our wheels; it is both science and art. Its taking all that we have learned through the years and improving upon it. We design each rotor from the ground up and analyze every details function along the way. Our two-piece design allows the rotor to expand and contract when heated from the friction caused by the brake pad. The aerated portholes on the stainless steel outer band vent heat and dust away from the disc.

Motorcycles are more than just a hobby; theyre a way of life. Re ecting the power of innovation, aesthetics and the inner workings, we give each one of our parts a soul. Each has its intended niche; each has its own style. Pulleys are no exception. The precision-hobbed tooth pro les are designed to t your bikes belt perfectly. Built for performance and designed for longevity.

WHEEL TESTING

The radial load testing machine simulates a load on a tire/wheel assembly while taking miles and miles of road with the occasional beating. The wheel is forced to endure countless rotations with one aw sending the design back to the drawing board.

The torsional load testing machine simulates starting and stopping, as well as the occasional burn out. Load sensitive rams cycle back and forth replicating real world style torture in an attempt to rip the hub out of the rim.

The massive impact testing unit simulates the pot holes and road hazards that a wheel is subjected to in the real world. Each and every wheel design is wrapped with a tire and a hard edge hit is replicated. The wheel must retain air pressure for a speci c time in order to pass.

Side load testing replicates the incredible stress a wheel is subjected to during cornering. You can trust your RSD wheels will withstand those canyon roads and track days because theyve come out of the simulated side load test unscathed.

TORSIONAL LOAD TESTING

SIDE LOAD TESTING

IMPACT TESTING

RADIAL LOAD TESTING

FEATURES High grade 420 stainless steel replaceable outer bands Billet aluminum CNC-machined inner carriers Cross drilled bands for increased ventilation Blanchard ground bands ensure precise and even tolerance 11.5 and 300mm rotors are xed 13 rotors attach via oating elements Front rotors are drilled for standard HD bolt pattern 3-1/4 X 5 X 5/16

Rear rotors are drilled for standard HD bolt pattern 3-1/4 X 5 X 3/8 All rotor carriers are counter bored with 2.22 I.D A reducer spacer (part# 0012-0227QN) is sold separately for 1.985 I.D. Wide rear wheels require use of rotors with 2.50 I.D.* RSD rotors will t 1984-1999 HD applications only if used in conjunction with Performance Machine calipers and RSD wheels* RSD rotors will not work with stock HD wheels

FEATURES CNC Machined from aluminum forging Hard anodized teeth Special adapter included allowing tment of 1.95, 2.22 and 2.50 O.D. hub anges 2000-06 Softail pulleys include mounting bolts Stainless steel belt retainer bolts included 2 2000000 0606 Soooftail pulpu leyleys is nclncludeude momountingin boltss S Staitainlenless s stests el bele t retaetataineiner br boltolts is nclncluded ddd

All RSD wheels, discs and pulleys are available in Black Ops, Contrast Cut, Chrome and Polish. Contact Performance Machine for any other custom nish options you are interested in.

WHEELSOur wheels begin with an aerospace quality, aluminum forgings that place the highest material strength in the same direction as the operating load, creating a light and strong wheel. From there we create the array of styles you see on our bikes throughout this catalog using CAD design software. Each wheel design must pass rigorous and intensive testing.

570

The diesel just got better. Our most popular wheel is now available with our Black Ops nish.

One of our most popular wheels, the Diesel is clean yet mean. We introduced the drilled rim lip speed dots on this wheel to help compliment its simple design and give it just enough pop to be a stand out. The Diesel wheel will ow with whatever bike you put it on.

DIESEL WHEEL BLACK OPS

DIESEL WHEEL CONTRAST CUT

FEATURES Fully sealed, maintenance free deep groove wheel bearings Design matched discs, pulley and air cleaner Rim Lip Detail

FEATURES Fully sealed, maintenance free deep groove wheel bearings Design matched discs, pulley and air cleaner Rim Lip Detail


The Judge is back with a vengeance in Black Ops Finish. Five spokes of fury make black even blacker.

The Judge is the original Contrast Cut wheel, the one that started it all. The great thing about the judge is it still looks as good today as it did when it was rst introduced and continues to be one of Rolands personal favorites. It has just enough hot rod and race inspiration to make it look good on anything.

JUDGE WHEEL BLACK OPS

JUDGE WHEEL CONTRAST CUT

FEATURES Fully sealed, maintenance free deep groove wheel bearings Design matched discs, pulley and air cleaner


572

Slam a set on anything for an instant weight reduction and high performance twist with just enough detail work to make the Black Ops come alive in two shades of black.

Huge rim pockets remove tons of weight while still retaining a rolled rim lip. Coupled with speed dots and super aggressive straight spokes the Slam is up to the task of making your motor-cycle turn faster while looking unlike any other machine.

SLAM WHEEL BLACK OPS

SLAM WHEEL CONTRAST CUT

FEATURES Fully sealed, maintenance free deep groove wheel bearings Design matched discs, pulley and air cleaner Rim Lip Detail RSD Logo Badge


HuHrostcycycy

SLSL

FEFEF F F FF D D RRR


The Boss in Black Ops is the epitome of subtlety and design smashed together in one stealthy, high performance package. Bolt a set of these on for instant tough.

The Boss in Contrast Cut is striking. The contrast cut nish on this wheel is second to none with an amazing amount of detail while staying lightweight.

BOSS WHEEL BLACK OPS

BOSS WHEEL CONTRAST CUT



574

As far as aggression and purpose, this wheel gets the job done as effectively as possible. Its simple yet directed design splits 9 into 18 spokes and is visually and architecturally built with structure in mind. This wheel will look at home on a race inspired bike as well as a cross country road bomber.

The Mission is simple, concise and designed to complement the detail work. CNC-machined aluminum, machined twice to offer black anodized speed dots, double pin stripes and a red RSD logo. Mission accomplished.

DOMINO WHEEL CONTRAST CUT

MISSION WHEEL CONTRAST CUT


FEATURES Fully sealed, maintenance free deep groove wheel bearings Design matched discs, pulley and air cleaner Double radial rim lip grooves RSD Logo Badge


HURLEY SCRAMBLER/CAFEThe Hurley Sportster started as a collaboration with Hurley and RSD to build a surf worthy caf bike. We shot a few pictures of her as a caf racer and somewhere on the way to the beach we decided moto bars, dual purpose tires and a solo seat were a better t and she was transformed into the Hurley Scrambler. It really goes to show what a versatile bike the sportster is and how easy it is to change a few parts and get something very different.

FINISH PART #PART

HURLEY SCRAMBLER/CAFE WISHLIST

CONTRAST CUT 0062-4005-BMREGULATOR LEVER SET

CONTRAST CUT 0063-2036-BMCHRONO GRIPS

CONTRAST CUT 0035-1093-BMCHRONO FOOTPEGS

CONTRAST CUT 0033-1129-BMCHRONO TOE PEG

CONTRAST CUT 0210-2007-BMTRACKER GAS CAP

BLACK 0217-2002-BPTRACKER BELT GUARD

CONTRAST CUT 0206-2039-BMTURBINE AIR CLEANER

BLACK 0208-2034-BPTRACKER FORK BRACE

BLACKTRACKER 2-INTO-1 BY V & H

BLACK 0177-2012-B

0208-2038-BM

0208-2039-B

0207-2001-B

0205-2009

NOSTALGIA IGNITION COVER

CONTRAST CUTFRONT MASTER CYLINDER CAP

BLACKCLIP ONS - 39MM

BLACKCAF GAUGE & HEADLIGHT RELOCATOR

POLISHCOIL IGNITION RELOCATOR

BOSS WHEEL - F 19X2.15

CAF SPORTSTER SEAT

CONTRAST CUT

CONTRAST CUT

BOSS WHEEL - R 18X4.25

BOSS DISC - R 11.5"

CONTRAST CUT

CONTRAST CUT

BOSS DISC - F 13"

576

The Caf Gauge and Headlight Re-locator lowers your headlight and gauges to a more sleek position from the top handlebar clamp down to the front of the top triple clamp and lowers the stock headlight 2 inches. This allows for the use of any aftermarket risers or complete elimination of risers for use of the RSD Caf 39mm Clip-Ons.

When utilising the RSD Caf Gauge and Headlight Re-locator, keep your LED light functionality with a LED unit.

CAFE GAUGE AND HEADLIGHT RE-LOCATOR

LED INDICATOR

Eliminates stock Sportster headlight visor/eyebrow LED warning/indicator light sold separately

Optional component for RSD Cafe Gauge & Headlight Re-locator ONLY (not compatible w/ OEM gauge mount) Allows all OEM warning & indicator functions (Outer Green: L&R Turn indicators, Red: Oil Pressure, Blue: High Beam & Center Green: Neutral) 5 LED lights in one arc-shaped weather-proof unit 12 long wiring lead Wire insulation color matched to OEM wiring for ease of installation Wires must be soldered and heat shrunk to OEM harness for proper installation

FEATURES

FEATURES

CAFE SPORTSTERThe RSD line of Caf Sportster Products easily convert a late model Sportster into an aggressive yet comfortable caf racer, while retaining all the function and reliability of the OEM wiring, headlight and speedometer.

* Except 2011-12 1200X, 1200C


CAF GUAGE & HEADLIGHT RELOCATOR

BLACK 0207-2001-B2007 and up SPORTSTER*

CHROME2007 and up SPORTSTER* 0207-2001-CH

PART #FITMENT

LED INDICATOR KIT

0207-20032007 and up SPORTSTER


The RSD 1 Clip-Ons mount to 39mm, 41mm or 49mm front forks, below the top triple clamp, for a low handlebar position. The aluminum bars are dimple milled to allow for stock wiring to cleanly exit your stock switch housings.

CLIP-ON HANDLEBARS 39MM, 41MM, 49MM

Adjustable to any pullback and any height between top and bottom triple clamps Fixed 5 degree down angle Replaces top mounted handlebars and risers Bar is 1 diameter to accept stock or aftermarket hand controls Bars slotted for external wiring and black anodized Black Ops has a gloss black bar w/a contrasting textured black and gloss black clip on

39mm Clip-Ons utilize all stock wiring, so there is no cutting or soldering. 41mm and 49mm Clip-Ons may need to shorten, cut and/or solder wiring, depending on current bar height*41mm and 49mm are not recommended for use with stock hand controls, due to clearance issues. A modi ed gas tank is recommended.

FEATURES FINISH PART #FITMENT SIZE

CAF CLIP ONS 39mm, 41mm and 49mm

BLACK ANO 0208-2041-B1984 and up SOFTAIL FXST 41MM FORKS

BLACK OPS 0208-2041-SMB1984 and up SOFTAIL FXST 41MM FORKS

CHROME 0208-2041-CH1984 and up SOFTAIL FXST 41MM FORKS

BLACK ANO 0208-2042-B2006 and up DYNA 49MM FORKS

BLACK OPS 0208-2042-SMB2006 and up DYNA 49MM FORKS

CHROME 0208-2042-CH2006 and up DYNA 49MM FORKS

BLACK ANO 0208-2039-B1988 and up XLR & FXR 39MM FORKS

CHROME 0208-2039-CH1988 and up XLR & FXR 39MM FORKS

BLACK OPS 0208-2039-SMB1988 and up XLR & FXR 39MM FORKS

578

Stylize your OEM hand controls with RSDs stock replacement front brake master cylinder cap.

MASTER CYLINDER CAPS

FEATURES Interchangeable RSD Logo Badges (Black & Brass)

HAND & FOOTCONTROLS

2008 and up FLHT

2006 and up SOFTAIL & DYNA & 2005-2007 FL, 1996-2003 SPORTSTER 1996-2005 SOFTAIL & DYNA & 1996-2004 FLHT

2004 and up SPORTSTER

OOFTFTAIL L & DYYYNANANA &&& 2220000 5-2020070707 FFFLL,L,, 111199996-6 20005 SOFTAAAIILIL &&& DDYNYNYNAAA &&& 19199696-22

p

20200008080808 aaandnd uupp FFLHLHLHLHTT

20200404 aandn up SSPOPORTSTTER

BLACK-OPS CONTRAST CUT CHROMEFITMENT

2006 and up FXST/FLST/FXD, 05-07 FLHT, FLHR, FLHX, FLTR

2008 and up FLHT, FLHR, FLHX, FLTR 0208-2035-SMB 0208-2035-BM

0208-2036-SMB 0208-2036-BM

0208-2035-CH

0208-2036-CH

2004 and up XL

96-05 FXST/FLST/FXD, 96-04 FLT, FLHT, FLHR, FLHX, FLTR, 96-03 XL 0208-2037-SMB 0208-2037-BM

0208-2038-SMB 0208-2038-BM

0208-2037-CH

0208-2038-CH

FRONT MASTER CYLINDER CAPS


REGULATOR LEVERS

These race inspired levers are not only stylish stock replacements, but customizable for any size mitt. Enjoy the comfort of adjustability and a wide nger pull area on the RSD Regulator Lever.

FEATURES Direct bolt-on to stock controls Twist adjuster easily modi es the lever distance from the handlebar CNC machined from billet aluminum Lever surface shape designed for a comfortable and smooth feel Laser-engraved RSD logo Brake and Clutch lever sold separately, or as a set

AVENGER LEVERS

Race-styled stock replacement levers add an aggressive look to your OEM controls.

FEATURES Direct bolt-on to stock controls CNC machined from billet aluminum Lever surface shape designed for a comfortable and smooth feel Laser-engraved RSD logo Brake and Clutch lever sold separately, or as a set Brakaka e aae nd n Cluutch lever sold separaately, or or as a a set

AVENGER INLAY LEVERS

All the clean style of the Avenger levers with the added comfort of a soft touch rubber inlay for long days of heavy clutch pulls and quick stops.

FEATURES Direct bolt-on to stock controls Avenger Inlay style features a rubber inlay added for grip and comfort CNC machined from billet aluminum Lever surface shape designed for a comfortable and smooth feel Laser-engraved RSD logo Brake and Clutch lever sold separately, or as a set

mfmfomf rtortortortor

sigsignedned fofor ar a cocomfommfortartableble aanand sd sd smmoommooth th ffeefeef llaseaser-er-er ngrgrngraveaavea d Rd RRRSD SD SD SD logloglogl oo

B B rakrake ae ae nd nd nd n ClCluCluC tchtch leleleleverververv sosos ldld sepsepe araaraa teltely, yy, or or o as as a sa seet

FINISH PART # PART #PART #FITMENTREGULATOR LEVER -

CONTRAST CUT

BLACK OPS2008 and up FLHT

2008 and up FLHT

2008 and up FLHT CHROME

CONTRAST CUT

BLACK OPS1996 and up BIGTWIN, 96-03 XL

1996 and up BIGTWIN, 96-03 XL

1996 and up BIGTWIN, 96-03 XL CHROME

CONTRAST CUT

BLACK OPS2004 and up XL SPORTSTER


2004 and up XL SPORTSTER CHROME

0062-4004-BM

0062-4004-SMB

0062-4004-CH

0062-4006-BM

0062-4006-SMB

0062-4006-CH

0062-4005-BM

0062-4005-SMB

0062-4005-CH

BRAKE CLUTCHSET

0062-2055-BM

0062-2055-SMB

0062-2055-CH

0062-2057-BM

0062-2057-SMB

0062-2057-CH

0062-2059-BM

0062-2059-SMB

0062-2059-CH

0062-2054-BM

0062-2054-SMB

0062-2054-CH

0062-2056-BM

0062-2056-SMB

0062-2056-CH

0062-2058-BM

0062-2058-SMB

0062-2058-CH

FINISH PART # PART #PART #FITMENT

CONTRAST CUT


2008 and up FLHT


CONTRAST CUT




CONTRAST CUT




BRAKE CLUTCHSET

0062-2062-BM

0062-2062-SMB

0062-2062-CH

0062-2064-BM

0062-2064-SMB

0062-2064-CH

0062-2066-BM

0062-2066-SMB

0062-2066-CH

0062-2061-BM

0062-2061-SMB

0062-2061-CH

0062-2063-BM

0062-2063-SMB

0062-2063-CH

0062-2065-BM

0062-2065-SMB

0062-2065-CH

0062-4007-BM

0062-4007-SMB

0062-4007-CH

0062-4009-BM

0062-4009-SMB

0062-4009-CH

0062-4008-BM

0062-4008-SMB

0062-4008-CH

AVENGER INLAY LEVER -

FINISH PART # PART #PART #FITMENT

CONTRAST CUT


2008 and up FLHT


CONTRAST CUT




CONTRAST CUT




BRAKE CLUTCHSETAVENGER LEVER -

0062-2069-BM

0062-2069-SMB

0062-2069-CH

0062-2071-BM

0062-2071-SMB

0062-2071-CH

0062-2073-BM

0062-2073-SMB

0062-2073-CH

0062-2068-BM

0062-2068-SMB

0062-2068-CH

0062-2070-BM

0062-2070-SMB

0062-2070-CH

0062-2072-BM

0062-2072-SMB

0062-2072-CH

0062-4010-BM

0062-4010-SMB

0062-4010-CH

0062-4012-BM

0062-4012-SMB

0062-4012-CH

0062-4011-BM

0062-4011-SMB

0062-4011-CH

580

See your local Drag Specialties dealer for pricing and availability.

FINISH PART #FITMENTCHRONO FOOT PEGS

BLACK OPS 0035-1093-SMBUNIVERSAL MALE MOUNT

CHROME

CONTRAST CUTUNIVERSAL MALE MOUNT

0035-1093-CH

0035-1093-BM

UNIVERSAL MALE MOUNT

BRASS 0035-1095UNIVERSAL MALE MOUNT

FINISH PART #FITMENTCHRONO TOE/SHIFTER PEG

BLACK OPSUNIVERSAL

CHROME

CONTRAST CUTUNIVERSAL

UNIVERSAL

BRASS

0033-1129-SMB

0033-1129-CH

0033-1129-BM

0033-1131UNIVERSAL

FINISH PART #FITMENTCHRONO GRIPS

BLACK OPS1984 and up HD DUAL CABLE MODELS

CHROME

CONTRAST CUT1984 and up HD DUAL CABLE MODELS

1984 and up HD DUAL CABLE MODELS

BRASS1984 and up HD DUAL CABLE MODELS

BLACK OPS2008 and up FLHT MODELS W/ E.T.C*

2008 and up FLHT MODELS W/ E.T.C*



ELECTRONIC THROTTLE CONTROL*

CHROME

CONTRAST CUT

BRASS

0063-2036-SMB

0063-2036-CH

0063-2036-BM

0063-2041

0063-2037-BM

0063-2037-SMB

REPLACEMENT GRIP RUBBER

0063-2037-CH

0063-2042

0063-1013

FINISH PART #FITMENTTRACKER FOOT PEGS

BLACK OPS 0035-1087-SMBDYNA-SPORTY 45 DEG MALE MOUNT

CHROME

CONTRAST CUTDYNA-SPORTY 45 DEG MALE MOUNT

0035-1087-CH

0035-1087-BM

DYNA-SPORTY 45 DEG MALE MOUNT

BRASS 0035-1090DYNA-SPORTY 45 DEG MALE MOUNT

BLACK OPSHD STRAIGHT MALE MOUNT

0035-1088-BM

0035-1088-SMB

HD STRAIGHT MALE MOUNT



CHROME

CONTRAST CUT

BRASS

0035-1088-CH

0035-1091

FINISH PART #FITMENTTRACKER TOE/SHIFTER PEG

BLACK OPS 0033-1126-SMBUNIVERSAL

CHROME

CONTRAST CUTUNIVERSAL

0033-1126-CH

0033-1126-BM

UNIVERSAL

BRASS 0033-1127UNIVERSAL

FINISH PART #FITMENTTRACKER GRIPS

BLACK OPS 0063-2019-SMB1984 and up HD DUAL CABLE MODELS

CHROME

CONTRAST CUT1984 and up HD DUAL CABLE MODELS

0063-2019-CH

0063-2019-BM

1984 and up HD DUAL CABLE MODELS

BRASS 0063-20301984 and up HD DUAL CABLE MODELS

BLACK OPS2008 and up FLHT MODELS W/ E.T.C*

0063-2022-BM

0063-2022-SMB




CHROME

CONTRAST CUT

BRASS

0063-2022-CH

0063-2031

ELECTRONIC THROTTLE CONTROL*

REPLACEMENT GRIP RUBBER 0063-1013

CHRONO GRIPS, FOOT & TOE PEGS

TRACKER GRIPS, FOOT & TOE PEGS

Time is on your side with the RSD Chrono line. Inspired by unique time pieces, the Chrono line offers a high level of detailing and design.

Comfort and control are obviously very important when ripping down the highway. We are big fans of being in control and our Renthal wrapped Tracker Grips are the perfect link from your hands to your bike. Tacky comfortable rubber with a pro le that matches the contour of your hand are critical and the tracker grips provide that combo.

FEATURES CNC Machined from billet aluminum Grip - Renthal rubber material Foot Peg Custom Knurled RSD rubber Interchangeable RSD Logo Badges (Black & Brass) RSD laser engraved logo Grips & Foot Pegs sold as a pair Replacement grip rubber available

FEATURES CNC Machined from billet aluminum Grip - Renthal rubber material Foot Peg Custom Knurled RSD rubber RSD laser engraved logo Grips & Foot Pegs sold as a pair Replacement grip rubber available

piececes,s, tthehe CCChrhrronono o liil nene oofffferers s a app y qq p

r racck &k & BrBrassas ))

p ,

rurur bbebber ar avaivailabbable e

tttto o o yoyoyoourururur bbbbikikiki e.ee.e TTTacackykyk ccomomomomfofofofortrtababblelele rrrububububbebebebeeb rrrr r kekekker r grgripipss prprprprovovovovidididide e ee ththththatatatat cccomommbobobob ..


Inspired by our passion for motocross styling, we decided to bring a little dirt to the road. Intentionally designed with a featherweight, ventilated body and aggressive tooth pattern for performance and grip.

MOTO FOOT PEGS

Direct stock replacement for HD male mount pegs Fits driver and passenger mounts Chrome mounting hardware kit sold separately

*Straight male mount pegs (pictured) are used on all HD models, including Sportster & Dyna passenger peg applications *45 degree male mount pegs are used on all Sportster and Dyna driver peg applications

FEATURES

STRAIGHT MALE MOUNT

45 MALE MOUNT

582


DESMO TRACKERSome call it Sacrilege, some call it madness and others call it more fun than you should be allowed to have on a motorcycle. No matter how you stack it, the Desmo Tracker was a shocking build. We started with a Ducati Desmocedici Moto GP replica and ended with a Desmo powered Dirt eating monster we call the Desmo Tracker. The results are a 200 HP street legal Moto GP Flat Tracker nished with love and care by the team at RSD in about two months.


HANDLEBARS FEATURES Multiple height and style options High quality hand TIG welding Manufactured in the USA

Tested for strength and integrity Accepts stock or aftermarket hand controls

HANDLEBARSComfort, attitude and quality are the priorities when picking a handlebar and at RSD we understand that. Weve pioneered new frontiers with our Vintage Bars, Ribbed Bars and now the Cross Bars making a handlebar more than just a handlebar. Made in America of the highest quality materials and tested both in the lab and real world, RSD bars are often imitated but never duplicated. Stick with the original, you wont be disappointed.

584

MOTO CROSSBAR

MINI APE CROSSBAR

Low rise aggressive motocross bend handlebar with a stylized billet crossbar.

The RSD High rise mini ape with a stylized billet crossbar will take you back to your BMX days.

FEATURES Heim joints on both ends of the crossbar add a mechanical look

and allow crossbar to be tightened until snug Slotted and drilled for internal wiring Knurling at 3.5 on center

FEATURES Heim joints on both ends of the crossbar add a mechanical look

and allow crossbar to be tightened until snug Slotted and drilled for internal wiring Knurling at 3.5 on center

1 diameter to accept stock or aftermarket hand controls Contrast Cut is a gloss black bar with a Contrast Cut Crossbar Black Ops is a textured black bar with a Black Ops Crossbar

1 diameter to accept stock or aftermarket hand controls Contrast Cut is a gloss black bar with a Contrast Cut Crossbar Black Ops is a textured black bar with a Black Ops Crossbar

39-3/4 WIDE X 5-1/4 RISE X 6 CENTER WIDTH X 3-5/8 PULLBACK

WIDTH

PULL

BACK

FINISH PART #FITMENT1 MOTO CROSSBAR HANDLEBAR

CONTRAST CUT

BLACK OPSSTANDARD

STANDARD 0173-1857-BP

0173-1857-TBP

FINISH PART #FITMENT1 MINI APE CROSSBAR HANDLEBAR

CONTRAST CUT

STANDARD

STANDARD

BLACK OPS

0173-1856-BP

0173-1856-TBP

CENTER

RISE

WIDTH

33 wide x 9 rise x 5 3/4 center width x 5 1/2 pullback

PULL

BACK

CENTER

RISE


VINTAGE HANDLEBAR

The Vintage bar is RSDs twist on the classic ape hanger The true Made in America original gusseted ape and its owing radius tubes and riding position are unmatched in style, design and quality. The stance will give you the aggressive yet comfortable riding position you are looking for and our end caps make it extremely easy to run internal wiring. If quality and originality are important to you, then look no further.

Springer bars feature knurling for risers at 4-3/4 on-center Multi-hole drilled corner gusset offers strength & rigidity Black bar features a gloss black bar & Chrome moon end caps Black Ops features a textured black bar & gloss black moon end caps Note: Springer bars are not for use with OEM Crossbones FLSTSB (x-bones) OEM Risers

FEATURES

VINTAGE SHORT STACK HANDLEBAR

Simply a shorter version of the taller Vintage bars. The short stack bars give you all the same features but with less stretch of the down tubes.

Available for standard or springer applications 1 diameter to accept stock or aftermarket hand controls Slotted and drilled for internal wiring Standard bars feature knurling for risers at 3-1/2 on-center Springer bars feature knurling for risers at 4-3/4 on-center Stylish multi-hole drilled corner gusset offers strength and rigidity Black bar features a gloss black bar & Chrome moon end caps Black Ops features a textured black bar & gloss black moon end caps

Note: Springer bars are not for use with OEM Crossbones Risers

FEATURES

CENTER

RISE

WIDTH

PULL

BACK

30 Wide x 12 Rise x 6-1/2 Center Width

Available For standard or springer applications 1 diameter to accept stock or aftermarket hand controls Slotted and drilled for internal wiring Standard bars feature knurling for risers at 3-1/2 on-center

WIDTH

CENTER

RISE

PULL

BACK

30 Wide x 7-1/2 Rise x 6-1/2 Center Width x 3-3/4 pullback

FINISH PART #FITMENT1 VINTAGE HANDLEBARS

BLACK 0173-1838-BP

0173-1838-TBP

0173-1838-CH

0173-1839-BP

0173-1839-TBP

0173-1839-CH

STANDARD

CHROME

BLACK OPSSTANDARD

STANDARD

BLACK OPS

BLACKSPRINGER FRONT END

SPRINGER FRONT END

CHROMESPRINGER FRONT END

FINISH PART #FITMENT1 VINTAGE SHORT STACK HANDLEBARS

BLACK 0173-1828-BP

0173-1828-TBP

0173-1828-CH

0173-1830-BP

0173-1830-TBP

0173-1830-CH

STANDARD

CHROME

BLACK OPSSTANDARD

STANDARD

BLACK OPS

BLACKSPRINGER FRONT END

SPRINGER FRONT END

CHROMESPRINGER FRONT END

586

VINTAGE KING APE HANDLEBAR

T-BAR HANDLEBAR

It seems like you can never make an ape hanger bar too big so we shot for the sky with our King Ape. We borrowed some style from our classic Vintage bar and made everything a little larger, including the tubing diameter to give you a punk tall bar with attitude, style and quality hand TIG welding. No swaging or uneven surfaces on these bars. If youre looking for high quality, look no further.

The RSD T-bar is an original take on a timeless design. We took the classic T-bar shape and added our signature radius ribbing for an extra detail. Not too tall, not too short, these bars are perfect for a clean yet comfortable ride while still looking tough.

FEATURES Black bar features a gloss black bar Black Ops has a textured black handlebar Slotted and drilled for internal wiring Knurling for risers at 3-1/2 on-center (non-springer) Multi-hole drilled corner gusset offers strength & rigidity

FEATURES One of a kind Ribbed accents 1 diameter to accept stock or aftermarket hand controls and/ or hydraulic clutch 6 tall integrated risers with 3-1/2 on-center bolt pattern

Slotted for hand controls Not recommended for internal wiring Internally threaded for 1/2-13 hardware (not included)

1-1/4 diameter bars with 1 diameter center mounting surface & control clamping surface Accepts stock or aftermarket hand controls handlebar clamps & risers Use of aftermarket hydraulic clutch master cylinders

WIDTH

CENTER

RISE

PULL

BACK

19 Style- 38 Wide x 19 Rise x 9-3/4 Center Width x 6-1/4 Pullback16 Style - 36-1/2 Wide x 16 Rise x 9-3/4 Center Width x 6 Pullback

WIDTH

RISE

PULL

BACK

27 Wide x 6 Rise x 4 Pull Back

FINISH PART #FITMENT1 T-BAR HANDLEBARS

CHROME 0173-1855-CHSTANDARD

FINISH PART #FITMENT1-1/4 VINTAGE KING APE HANGER HANDLEBARS

BLACK 0173-1852-BP

0173-1852-TBP

0173-1852-CH

0173-1853-BP

0173-1853-TBP

0173-1853-CH

STANDARD 16

CHROME

BLACK OPSSTANDARD 16

STANDARD 16

BLACK OPS

BLACKSTANDARD 19

STANDARD 19

CHROMESTANDARD 19


FLAT-OUT DRAG HANDLEBAR

CONVOY HANDLEBAR

Built for down low, no frills riding. Our most aggressive bend for those that want to keep their head down and the speed up.

Add style and attitude with a slightly higher hand position for an aggressive feel, giving more control than the stock bar.

FEATURES 1 diameter to accept stock or aftermarket hand controls Slotted and drilled for internal wiring To clear stock Softail tank, use ribbed riser extension

Available for all FLHT Models with Batwing Fairings 1 diameter to accept stock or aftermarket hand controls Will work with stock cables and brake lines Slotted and drilled to allow internal wiring Knurling for risers at 4 on-center Stylish multi-hole drilled corner gusset offers strength & rigidity Billet aluminum end caps included Black bar features a gloss black bar & Chrome moon end caps

Integrated risers are threaded at 3-1/2 on-center with 1/2-13 threads to t most stock HD applications Black bar features a gloss black bar

WIDTH

RISE

PULL

BACK

32 wide x 1-1/2 rise x 4 pullback

PULL

BACK

CENTER

WIDTH

RISE

PULL

BACK

34.5 wide x 9 rise x 14.75 center width x 6 pullback

FINISH PART #FITMENT1 FLAT-OUT DRAG STYLE HANDLEBARS

BLACK 0173-1827-BP

0173-1827-CH

STANDARD

CHROMESTANDARD

FINISH PART #FITMENT1 CONVOY FL HANDLEBARS

BLACK 0173-1832-BP

0173-1832-CH

0173-1841-BP

0173-1841-CH

1986-2007 FLHT/FLHX

CHROME1986-2007 FLHT/FLHX

BLACK2008 and up FLHT/FLHX

CHROME2008 and up FLHT/FLHX

588

GLIDER HANDLEBAR

LAZY BOY HANDLEBARLAZY BOY HANDLEBAR

FLAT-OUT RISER EXTENSIONS

Bent similar to stock bars for the rider who wants style but doesnt want to change hand position. Soar across the open road with this perfect cohesion of style and comfort.

Designed for the big cruiser, these bars are bent so you can relax and enjoy your Sunday ride with the utmost comfort. The RSD Moto Risers are built for abuse and designed and engineered for a light weigh yet durable connection of the handlebars to your top triple clamp.

Designed to compliment our Flat-Out Drag handle-bars and give crucial lift in order to clear a stock Softail tank. They can also be used to offer extra lift to any risers and add style to the front of your bike. Ribbing matches the RSD Nostalgia Cover Line.

FEATURES Available for all FLTR Models with Fairings 1 diameter to accept stock or aftermarket hand controls Will work with stock cables and brake lines Slotted and drilled to allow internal wiring Knurling for risers at 3-1/8 on-center Stylish multi-hole drilled corner gusset offers strength & rigidity Billet aluminum end caps included Black bar features a gloss black bar & Chrome moon end caps

FEATURES Fitments Available For All FLHT Models with Batwing Fairings 1 diameter to accept stock or aftermarket hand controls Will work with stock cables and brake lines Slotted and drilled to allow internal wiring Knurling for risers at 3-1/2 on-center Stylish multi-hole drilled corner gusset offers strength & rigidity Billet aluminum end caps included Black bar features a gloss black bar & Chrome moon end caps

FEATURES Accept stock or aftermarket 1 diameter handlebars 1-1/2 Chrome pinch bolts included Drilled and tapped for 1/2-13 mounting bolts

FEATURES Lift bars 2-1/4 Allows use of Flat-Out Drag Bars on stock HD Softail Gas Tank 1/2-13 Mounting hardware included Mounts between risers and triple clamp

WIDTH

CENTER

RISE

PULL

BACK

33 wide x 9 rise x 7-3/4 center width x 4 pullback

ChrChrromeme momomoon o end caps s

WIDTH

CENTER

RISE

PULL

BACK

33 Wide x 9 Rise x 14 Center Width x 5-3/4 Pullback

FINISH PART #FITMENT1 GLIDER ROAD GLIDE HANDLEBARS

BLACK 0173-1831-BP

0173-1831-CH

0173-1842-BP

0173-1842-CH

1998-2007 FLTR

CHROME1998-2007 FLTR

BLACK2008 and up FLTR

CHROME2008 and up FLTR

FINISH PART #FITMENT1 LAZY BOY FL HANDLEBARS

BLACK 0173-1833-BP

0173-1833-CH

0173-1843-BP

0173-1843-CH

1986-2007 FLHT/FLHX

CHROME1986-2007 FLHT/FLHX

BLACK2008 and up FLHT/FLHX

CHROME2008 and up FLHT/FLHX

dldldle-e-ekk

llififft t te..

FINISH PART #FITMENTMOTO RISERS

BLACK 0208-2030-B

0208-2030-CH

HD 1.5

CHROMEHD 1.5

FINISH PART #FITMENTFLAT-OUT RISERS

BLACK 0208-2033-BHD SOFTAIL

CHROMEHD SOFTAIL 0208-2033-CH


GAS CAPS, DUMMY CAPS & LED FUEL INDICATOR CAPSIf you purchased your RSD air cleaner prior to 2010 and notice any oil dripping from the bottom lter element, this FREE kit cleans up the pesky problem. We have found that some engines make excessive crankcase pressure causing them to spew a bit more oil than others up through the breathers. This retro t consists of slotted-head breather bolts and injection molded rubber tubes that t securely into the backing plate of your existing air cleaner. These parts helproute any oil coming out of your breathers right back into yourengine without spilling a drop.

GAS CAPSTRACKER TECH GEARDRIVE CAFE

FITMENT

1992 and up HD MODELS 0210-2013-SMB 0210-2013-BM 0210-2013-CH 0210-2014-SMB 0210-2014-BM

CAFE BO CAFE CC CAFE CH GEAR DRIVE BO GEAR DRIVE CC GEAR DRIVE CH TECH BO

LED FUEL INDICATOR CAP

0210-2014-CH 0210-2015-SMB

VINTAGE CCVINTAGE BO VINTAGE CHTECH CC TECH CH TRACKER BO TRACKER CC TRACKER CH

0210-2015-BM 0210-2015-CH 0210-2016-SMB 0210-2016-BM 0210-2016-CH 0210-2017-SMB 0210-2017-BM 0210-2017-CH

FITMENT

LATE 1996 and up HD MODELS 0210-2008-SMB 0210-2008-BM 0210-2008-CH 0210-2009-SMB 0210-2009-BM 0210-2009-CH 0210-2010-SMB


DUMMY CAP

0210-2010-BM 0210-2010-CH 0210-2011-SMB 0210-2011-BM

VINTAGE CCVINTAGE BO VINTAGE CHTECH CC TECH CH TRACKER BO TRACKER CC TRACKER CH

0210-2011-CH 0210-2009-SMB 0210-2012-BM 0210-2012-CH

FITMENT

LATE 1996 and up HD MODELS 0210-2004-SMB 0210-2004-BM 0210-2004-CH 0210-2006-SMB 0210-2006-BM 0210-2006-CH 0210-2005-SMB


GAS CAP

0210-2005-BM 0210-2005-CH 0210-2007-SMB 0210-2007-BM 0210-2007-CH 0210-2018-SMB 0173-1805-BM 0173-1805-CH

VINTAGE CC VINTAGE CHTECH CC TECH CH TRACKER BO TRACKER CC TRACKER CH VINTAGE BO

LED CAP DUMMY CAP

BOTTOM VIEW

GAS CAP

BOBOTT

GAS CAP FEATURES Direct replacement screw-in vented gas cap to replace the stock gas cap

DUMMY CAP FEATURES Direct replacement snap-in cap to replace the left side OEM fuel gauge Design matched to RSD Gas Cap Line

LED INDICATOR CAP FEATURES Direct replacement snap-in cap to replace the left side OEM fuel gauge Low fuel LED light built in LED user programmable to any pre-set fuel level Design matched to RSD Gas Cap Line

590


BAGGERThis simple yet effective custom bagger really shows off what the RSD product line can do for your bagger. We threw on an ultra high performance radial mount Marzocchi fork coupled with huge dual discs and the entire line of RSD parts to create a comfortable streetglide that handles every bit as good as it looks. Clean, comfortable and fun to ride. What more can you ask for?

FINISH PART #PART

BAGGER WISHLIST

CONTRAST CUT 1010-1043CLARITY AIR CLEANER

CONTRAST CUT 0940-1057CLARITY TIMING COVER

CONTRAST CUT 0610-0597AVENGER LEVER SET

CONTRAST CUT 0630-1018CHRONO GRIPS

CONTRAST CUT 0610-0326FRONT MASTER CYLINDER CAP

CONTRAST CUT 0940-0985NOSTALGIA ROCKBOX COVERS

BLACK 0601-1268CONVOY HANDLEBARS

0801-0510HANG LO 2-UP SEAT

BLACK 1801-0309TRACKER SLIP ON MUFFLERS BY V & H

CONTRAST CUT 0201-1338BOSS FRONT WHEEL 21X3.5

CONTRAST CUT 1710-1109

0202-1555

1710-1113

BOSS FRONT ROTOR 13"

CONTRAST CUTBOSS REAR WHEEL 18X5.5

CONTRAST CUTBOSS REAR ROTOR 11.8"


VINTAGE KITThe Vintage Softail Conversion Kit is available in individual components to tailor your bike to your unique style and budget. Each group is engineered to t seamlessly together with minimal effort by you. The result is a dramatic transformation of the standard Softail into a period style bobber that retains the bulk of the OEM bike for an easy to build, easy to insure and easy to ride motorcycle, with minimal fabrication.

BEFORE

AFTER

Clean and effective, the RSD Tracker Rear Fender Kit greatly simpli es and lightens the back end of your Softail, in looks and weight. The RSD steel fender struts are rst machined then bent to avoid the at plate look and our rear fender is bobbed for a tight t to your rear tire. Easy and simple installation takes the guessing out of how to bob your Softail.

TRACKER REAR FENDER KIT

Direct bolt-on to HD Softails (Except Rocker)

Struts made from 3/8 thick 1018 Steel and available in Chrome or Black Powder Coat nishes

9 fender made from 1018 steel and available in raw nish only

Rear fender and struts are available separately for use with many other custom fenders

Quality sheet metal work requires minimal preparation for paint

*Requires fender supports to be cut off from stock chassis on 1990-2007 models

FEATURES

FINISH PART #FITMENT200MM STRUTS & FENDER KIT

BLACK 0215-2002-BP

0215-2002-CH

0215-2004-BP

0215-2004-CH

1990-2007 SOFTAIL W/ 200MM REAR TIRE

CHROME1990-2007 SOFTAIL W/ 200MM REAR TIRE

BLACK2008 and up FXST/FLST W/ 200MM REAR TIRE

CHROME2008 and up FXST/FLST W/ 200MM REAR TIRE

FINISH PART #FITMENT200MM STRUTS ONLY

BLACK 0215-2001-BP

0215-2001-CH

0215-2003-BP

0215-2003-CH

1990-2007 SOFTAIL W/ 200MM REAR TIRE

CHROME1990-2007 SOFTAIL W/ 200MM REAR TIRE

BLACK2008 and up FXST/FLST W/ 200MM REAR TIRE

CHROME2008 and up FXST/FLST W/ 200MM REAR TIRE

FINISH PART #FITMENT200MM VINTAGE REAR FENDER

STEEL 0174-00531990 and up SOFTAIL W/ 200MM REAR TIRE

592

VINTAGE GAS TANK KIT

GAS-IT KIT

Developed as a timeless bobber-style tank; our Vintage Gas Tank was designed for those who appreciate the past and all its style. Think pin-ups and the girl next door, you get the best of both worlds.

Building a custom tank for your fuel injected Harley? Wondering how to cram all that fuel injection equipment into the tank? With the RSD Gas-It Kit, your stock HD fuel injection parts are removed and relocated inside the tank, allowing a clean, uncluttered tank face, while maintaining the fuel injection we all love so much.

FEATURES Approximately 3 gallon fuel capacity Available for fuel injected and carbureted Softail models (Fuel Injection Tank includes RSD Gas It Kit See Page 67) Backbone cover hides OEM wiring and relocates your stock ignition switch

FEATURES

Relocates OEM 01-07 Delphi fuel pump, fuel pressure regulator, fuel lter & fuel level sending unit to the underside of your custom tank A smooth and reliable way to hide all fuel injection components Includes billet machined steel weld-in plate, 3.75 X 8 aluminum manifold Same kit that is included with RSD Fuel Injected Gas Tank Kit Requires vented tank or vented gas cap*Custom fabrication and welding required*Your custom tanks bottom must be relatively at to accommodate part installation*Not legal for sale or use on pollution controlled vehicles Softail Delphi Fuel Injected*2008 and up models require use of 2001-07 OEM Delphi Fuel Injection Components

No fabrication required Accepts RSD Gas Caps, Late Model L96-12 Stock Replacement Vented Gas Caps* Not legal for sales or use on pollution controlled vehicles

2008 and up Models require use of 2001-07 OEM Delphi Fuel Injection components

Gas-It Kit uses existing fuel pump components from your fuel injected Softail. If starting from scratch, you must purchase all of the following components from your local Harley-Davidson dealer for 2001-2007 Delphi systems.

FINISH PART #FITMENTGAS-IT FUEL INJECTION KIT

STEEL 0173-18372001 and up DELPHI FUEL-INJECTED MODELS

OEM PART# PRODUCT DESCRIPTION

27408-01

75300-05

61001-01

62189-01A

62897-01B

FUEL PRESSURE REGULATOR

FUEL SENDER KIT

FUEL FILTER KIT, INCLUDES CLAMPS, O-RING AND HOSE

PUMP ASSEMBLY

CHECK VALVE ASSEMBLY WITH O-RING

FINISH PART #FITMENTVINTAGE GAS TANK CONVERSION KIT

STEEL 0173-18442000-2006 FXST/FLST W/ CARB

FINISH PART #FITMENTVINTAGE GAS TANK ONLY


FINISH PART #FITMENTVINTAGE GAS TANK W/ GAS-IT FUEL INJECTION KIT

STEEL 0173-18452001 and up FUEL-INJECTED SOFTAIL MODELS

FINISH PART #FITMENTBACKBONE COVER ONLY




DYNA FIGHTER

594

Designed as a direct replacement for your stock valve cover, sold as a pair.

ROCKER BOX COVERS Laser engraved RSD Logo Hardware included Gaskets included

FEATURES


MOTOR COVERSWe are constantly looking to the past and migrating old designs into the future. Our Nostalgia Cover Line products are a perfect example of that blend and they transform a twincam HD motor into something special. Beautifully machined from Billet Aluminum, we have you covered with three nish options, Chrome, Black Anodize and our newest offering, Contrast Cut, where the covers are hand sanded for a unique handcrafted look.

FINISH PART #FITMENTNOSTALGIA ROCKER BOX COVERS

BLACK ANO 0177-2002-B1999 and up TWIN CAM

CONTRAST CUT 0177-2018-BH1999 and up TWIN CAM

CHROME 0177-2002-CH1999 and up TWIN CAM


CAM COVER

TRANSMISSION COVER

5 SPEED

Designed as a direct replacement for your stock Timing/Cam cover

Designed as a direct replacement for your stock top transmission cover.

FEATURES Laser engraved RSD Logo Hardware included Gasket included

Laser engraved RSD Logo Chrome Hardware included Gasket included

LL Laseasea r er engrngrngraveavev d RRRSD SD D LogLoggoo H HHardarddwarwarw re ie inclnclnc udeudeddd G G Gaskaskasket et ett incinci ludludddedede

FINISH PART #FITMENTNOSTALGIA 6 SPEED TRANSMISSION TOP COVER

BLACK ANO 0203-2001-B2007 and up SOFTAILS / 2007 and up TOURING & 2006 and up DYNA

CONTRAST CUT 0203-2002-BH2007 and up SOFTAILS / 2007 and up TOURING & 2006 and up DYNA

CHROME 0203-2001-CH2007 and up SOFTAILS / 2007 and up TOURING & 2006 and up DYNA

FINISH PART #FITMENTNOSTALGIA 5 SPEED TRANSMISSION TOP COVER

BLACK ANO 0203-2003-B2000-2006 FXST/FLST, 2001-2006 FLHT/R, F

CONTRAST CUT 0203-2003-BH2000-2006 FXST/FLST, 2001-2006 FLHT/R, F

CHROME 0203-2003-CH2000-2006 FXST/FLST, 2001-2006 FLHT/R, F

ddd

6 SPEED

FINISH PART #FITMENTNOSTALGIA CAM COVER

BLACK ANO 0177-2001-B2001 and up TWIN CAM

CONTRAST CUT 0177-2001-BH2001 and up TWIN CAM

CHROME 0177-2001-CH2001 and up TWIN CAM

596

IGNITION/POINTS COVER

DERBY COVER

INSPECTION COVER

Designed as a direct replacement for your stock timing cover. *Not compatible with Nostalgia Timing CoverPart # 0177-2001-CH, 0177-2001-B & 0177-2001-BH

Designed as a direct replacement for your stock derby cover on your OEM primary. *2006 Dyna and all 2007 and up applications require the use of a gasket.

Designed as a direct replacement for your chain tension inspection coveron your OEM primary.

FEATURES Laser engraved RSD Logo Chrome hardware included Gaskets included

apappplplicattioionsn requiuireere theh uusese oof f a a gagaskett..

SPSPPECECTITIIONONON CCCCOOVVO ERERER

FINISH PART #FITMENTNOSTALGIA IGNITION COVER

CHROME 0177-2013-CH1999 and up TWIN CAM (5-HOLE)

BLACK ANO 0177-2012-B1970-1999 BIG TWIN - EXCEPT TWIN CAM, 2004 and up XL (2-HOLE)

BLACK ANO 0177-2013-B1999 and up TWIN CAM (5-HOLE)

CONTRAST CUT 0177-2013-BH1999 and up TWIN CAM (5-HOLE)

CONTRAST CUT 0177-2012-BH1970-1999 BIG TWIN - EXCEPT TWIN CAM, 2004 and up XL (2-HOLE)

CHROME 0177-2012-CH1970-1999 BIG TWIN - EXCEPT TWIN CAM, 2004 and up XL (2-HOLE)

FINISH PART #FITMENTNOSTALGIA DERBY COVER

BLACK 0177-2011-B1999 and up TWIN CAM (5-HOLE)

CONTRAST CUT 0177-2011-BH1999 and up TWIN CAM (5-HOLE)

CHROME 0177-2011-CH1999 and up TWIN CAM (5-HOLE)

BLACK 0177-2009-B1970-1998 BIG TWIN (3-HOLE)

CHROME 0177-2009-CH1970-1998 BIG TWIN (3-HOLE)

CONTRAST CUT 0177-2009-BH1970-1998 BIG TWIN (3-HOLE)

FINISH PART #FITMENTNOSTALGIA INSPECTION COVER

BLACK ANO 0177-2014-B1970-2006 FX/FL, FXST/FLST, FXWG & 1993-2005 FXDWG

CONTRAST CUT 0177-2014-BH1970-2006 FX/FL, FXST/FLST, FXWG & 1993-2005 FXDWG

CHROME 0177-2014-CH1970-2006 FX/FL, FXST/FLST, FXWG & 1993-2005 FXDWG


Simple bolt on installation Compliments additional RSD Tracker products Black guard features gloss black nish w/ brass badge Black Ops features textured nish w/ satin black badge

FEATURES

RSD belt guards are a high quality, aesthetic addi-tion to an area often ignored on the bike. Featuring a unique drill and slot pattern on the top and a drilled pattern on the side that lightens up the belt area and gives a touch of air.

TRACKER BELT GUARDSFINISH PART #FITMENTTRACKER BELT GUARDS

BLACK OPS 0217-2002-TBP2004 and up XL SPORTSTER

CHROME

BLACK2004 and up XL SPORTSTER

0217-2002-CH

0217-2002-BP


BLACK OPS 0217-2003-TBP2007 and up SOFTAIL

BLACK2007 and up SOFTAIL 0217-2003-BP


CHROME 0217-2003-CH2007 and up SOFTAIL

BLACK OPS 0217-2004-TBP2007 and up DYNA

CHROME

BLACK2007 and up DYNA

0217-2004-CH

0217-2004-BP

2007 and up DYNA

HANDCRAFTEDAt RSD we still believe in hand fabricated, made in the USA products. Its who we are and how we started, one piece at a time, one bike at a time, where every detail counts. All of our stainless and raw steel parts utilize the highest quality material for a true handmade product that gives your machine a hand built feel without the bloody knuckles.

598

NARROWGLIDE FORK BRACE

WIDEGLIDE FORK BRACE

Simpli cation in the name of function is what our fork brace is all about. It allows you to get rid of the front fender without losing the integrity of the suspension. Eliminates fork twist and increases rigidity from stock while looking damn good.

When the front fender is removed from the stock forks it may look good but you end up with a exy yer that twists and sways more than a drunken sailor. We found this out when we started putting wide, 21 wheels on our Softails. Bring the performance back by keeping your front wheel going in the direction you point it.

FEATURES Replaces front fender on narrowglide forks Laser cut from 3/16 1018 steel Practically eliminates front fork ex For use with a 19 or 21 front wheel/tire Hardware included Chrome has a Chrome hoop with a Brass RSD logo badge Black powder-coat has a gloss black hoop with Brass RSD logo badge Black Ops has a texture black hoop with gloss Black RSD logo badge*Not designed for use with front fender

FEATURES Replaces front fender on Softails or Wideglide forks Laser cut from 3/16 1018 steel Practically eliminates front fork ex For use with up to a 21 x 3.5 front wheel/tire Hardware included Chrome has a Chrome hoop with a Brass RSD logo badge Black powder-coat has a gloss black hoop with Brass RSD logo badge Black Ops has a texture black hoop with gloss Black RSD logo badge*Not designed for use with front fender

FINISH PART #FITMENTTRACKER NARROWGLIDE FRONT FORK BRACE

BLACK 0208-2034-BP1988 and up XL, 1988-2005 FXR/FXD

CHROME 0208-2034-CH1988 and up XL, 1988-2005 FXR/FXD

BLACK OPS 0208-2034-TBP1988 and up XL, 1988-2005 FXR/FXD

FINISH PART #FITMENTTRACKER WIDEGLIDE FRONT FORK BRACE

BLACK 0208-2029-BP

0208-2029-TBP

0208-2034-CH

1984 and up FXST/FLST, 1993-05 FXDWG

CHROME1984 and up FXST/FLST, 1993-05 FXDWG

BLACK OPS1984 and up FXST/FLST, 1993-05 FXDWG


HEADLIGHT BRACKET

TAG BRACKET

SPORTSTER COIL IGNITION RE-LOCATOR

TOP MOTOR MOUNT

Used for Springer front-end applications, this handcrafted, polished stainless steel bracket relocates your headlight to the bottom of the shock. Shine more light on the road and give your Springer a streamlined look with added adjustability.

This handcrafted, steel bracket is designed to bolt directly to the OEM passenger foot peg hole and vertically mount your license plate. The dual circuit LED light works as both tail and brake light. The ri ed tail-light housing and beehive shaped lens give you a classic hot rod style.

Our Polished Stainless Steel Coil Ignition Re-locator moves the location of coil and ignition switch from under the neck of your Sportster to between the V of your motor and removes the plastic wire caddy to expose the frame of your bike above the front cylinder.

We offer this made in the USA handcrafted, beautifully polished stainless steel bracket in two con gurations; one to retain the stock placement of your ignition coil and the other to relocate the coil to the top of the motor mount.

FEATURES Mounts to stock or custom applications Polished stainless steel Wide range of adjustability Chrome mounting hardware included* OEM headlight may require spacing

FEATURES Main bracket made from 3/16 laser cut 1018 steel LED dual circuit tail/brake light Billet aluminum tail-light housing and retainer ring Laser engraved with RSD logo Billet aluminum license plate frame Red poly carbonate taillight lens Chrome hardware included*Not legal in some states*Light does not meet DOT approval*Easily adaptable to most custom bikes

Relocates location of coil and ignition switch Allows removal of plastic Wire Harness Caddy (OE part # 70642-07) Polished stainless steel construction New spark plug wires required for use * Horn must be relocated

Direct replacement for stock mount Polished stainless steel construction Billet coil bracket included with coilrelocation motor mount Spark plug wires required for use of motor mount with coil relocation All chrome mounting hardware included

rkrkss s asas bbotothh tataiil aaandnd bbbrrarakeke ligighhtt.. ThT ee riri eded taiaill lilighght t hohousu ing g annd bebeehehhiv

r cr cr ccut utu 1011018 s8 s8 steeteteell

nnnd rd rd reeetaetaineiner rringng

esesess

SOFTAIL CUSTOMW/ COIL RELOCATION

SOFTAIL STOCKREPLACEMENT VERSION

DYNA STOCK REPLACEMENTCOIL BRACKET (FOR USEWITH STOCK TANK)

MMATTIONION

SOFSOFOFTAITAT L SSTOCTO KREPREPLACLACA EMEEM NT TNT VERVERSIOSISIONN

FINISH PART #FITMENTNOSTALGIA TOP MOTOR MOUNT

POLISHED 0205-20072000 and up SOFTAIL -EXCEPT FXS,FX/W/C

POLISHED 0205-20102004 and up DYNA

POLISHED 0205-20002000 and up TWIN CAM SOFTAIL W/ COIL RELOCATION -EXCEPT FXS,FX/W/C

FINISH PART #FITMENTNOSTALGIA HEADLIGHT RELOCATION BRACKET

POLISHED 0207-2000HD SPRINGER MODELS

FINISH PART #FITMENTIGNITION COIL RELOCATOR

POLISHED 0207-20092007 and up XL w/ 3.3 GAL TANK

FINISH PART #FITMENTTRACKER TAG BRACKET

BLACK 0215-2000-BP

0215-2000-CH

2000 and up FXST/FLST (EXCEPT FXSTD)

CHROME2000 and up FXST/FLST (EXCEPT FXSTD)

600


APPARELIts not all welders and hammers at RSD. We took some time out of the shop to throw down a few new Tshirt designs for both the men and the ladies. Our 145 Gram, 100% cotton Ts are and printed with care and comfort in mind. For the full RSD line of soft goods and leather please visit rolandsands.com.

MENS WOMENS

BLACK BLOCK

BLACK/GREY BADGE

RED BLOCK

WING

RSD LOGO NAVY

BLACK/GREY RIBBED


2-UP SEAT DYNA ENZO

2-UP SEAT DYNA AVENGER

2-UP SEAT DYNA BOSS

SOLO SEAT SPORTSTER ENZO

SOLO SEAT 200MM TYRE SOFTAIL BOSS

2-UP SEAT FL ENZO

SOLO SEAT SPORTSTER BOSS

Inspired by high performance automobiles and ne leather craftsmanship of the old world, the Enzo seat in distressed black gives you a high level of detail that blends in as well as it stands out. Our shaped foam center part line adds an extra level of comfort on long rides while keeping it classic.

Our new Avenger pattern features raised padding with a perforated cover, sewn and formed in just the right places for a comfortable seat. The detailing of the perforated sections add the right amount of style to make it unique yet not overdone.

Our inspiration for the Boss seat was born on the runway and pays homage to the art of high end upholstery. This is not just another diamond seat as is evident in the painfully detailed triple stitch sew lines and raised perforated diamond pattern coupled with our unique distressed vinyl. Be the Boss.

FITMENT: 2006 AND UP DYNABLACK: M76902 BROWN & BLACK: M76901

FITMENT: 2006 AND UP DYNABLACK: M76696

FITMENT: 2006 AND UP DYNABLACK: M76698

FITMENT: 2004 AND UP SPORTSTERSBLACK: M76903 BROWN & BLACK: M76907

FITMENT: 2006 AND UP SOFTAILS WITH 200MM TYREBLACK: M76906

FITMENT: 2008 AND UP FL TOURINGBLACK: M76904 BROWN & BLACK: M76905

FITMENT: 2004 AND UP SPORTSTERSBLACK: M76908

AAATTT SPSPSPSP

enenendddd upupupuphohohoh slslsteteeteryryry.. ThThThTh sis iiss nn jjstststitititchchchch ssseweww lllinini esese aandndnd rraiaia seseed d d pepepep rfrforororatatateded ddiaiaiamommondndd ppatatttetetet rnrnBe the Boss.

UPUPUP

FIFIFF TMTMT ENENNNT:T:: 222000000666 ANANNANDD D UPUPUP DDDYNYNYNNAAAAABLBLLACACACCK:K:K: MMM767676696969888

22000000444776769090

TMTMTMAACACA

SOSOSOSOLOLOO SSSSEAEAEEA

2-2-2-2-UU

FIFIFIITMTMTMENENENT:T: 22BLBLBLACACACACK:K:K MMMM7777

FIFIFF TTTBLBLBBLAAA

SOSOOSOLOLOLO

FIFIFIITMTMTMTMENENNBLBLLLACACCACKKKK

MANU

FACTURED BY

MUSTANG SEAT

S

602

The newest collaboration between RSD/Vance and Hines brings you high performance exhaust in a light weight package. Weve stripped our newest exhaust system to only the necessary elements, exposed the weld for a Works style appearance and added a slash cut carbon and stainless tip for style points as well as performance. Weve also done all we could to tuck the system up tight to the bike for ground clearance allowing usage of standard sporty mid controls and rear sets.

The newest collaboration between RSD/Vance and Hines brings you high performance exhaust in a light weight Gloss Carbon and Satin Black we call Carbon Ops. Weve stripped our newest exhaust system to only the necessary elements, dipped it in Black Ceramic for a tough nish and added a slash cut carbon and stainless tip for style points as well as performance. Weve also done all we could to tuck the system up tight to the bike for ground clearance allowing usage of standard sporty mid controls and rear sets.

This is the ultimate High Performance intake from RSD. Weve combined the best in performance and light weight with an ergo friendly slanted carbon ber intake lter from K&N. Our new Slant Filter element gives more knee clearance and a slanted surface thats easy on the body during hard riding. The Filter element is coupled with our newest backing plate shape from Vance and Hines for industry leading ltration in a simple package.

FEATURES All Stainless Steel construction with Carbon Fiber End Cap. Brush Finish Tig Welded w/ 18mm O2 sensor bungs(O2 plugs not included available as accessory).

FEATURES All Stainless Steel construction with Carbon Fiber End Cap. Black Hi Temp Ceramic Finish Tig Welded w/ 18mm O2 sensor bungs(O2 plugs not included available as accessory).

FEATURES Laser Etched Black Anodized Cover Black Anodized Backing Plate and Mounting Hardware Carbon Fiber Ergo Trimmed K&N Filter Powder Coated Inlet Adaptor

y)y)

FITMENT: 2004 and up HD Sportster models with standard mid controls or RSD rear sets only (Does not fit stock forward controls)

SLANT 2 INTO 1 EXHAUST SYSTEM STAINLESS

SLANT 2 INTO 1 EXHAUST SYSTEM CARBON OPS

SLANT 2 INTO 1 EXHAUST SYSTEM CARBON OPS

Designed to take your RSD Slant 2 into 1 Exhaust System down a notch or two. This optional dB Killer insertis simple to install and drops thesound level typically 2-4 dBs.

OPTIONAL DB KILLER SOUND INSERT

PART #: 11807

PART #: 41807

PART #: 26531

PART #: 30015

00777

rear sets.s.

ghghghheee

eee

dd

T

ear sets.s.

hhhh

T #: 11807


RISER PLUG SET

PART #: 0208-2060-CH 0208-2060-BM 0208-2060-SMB

CABLE CLUTCH COVER - CLARITY

FITMENT: 07-UP, FXST, 06-UP, FL & FXDPART #: 0177-2022-BM 0177-2022-CH 0177-2022-SMB

FITMENT: 87-06 BIG TWINPART #: 0177-2031-BM 0177-2031-CH 0177-2031-SMB

CABLE CLUTCH COVER - NOSTALGIA

FITMENT: 07-Up, FXST, 06-Up, FL + FXD 6 SpeedPART #: 0177-2025-B 0177-2025-BH 0177-2025-CH 0177-2025-SMB

FITMENT: 87-06 Big Twin 5-SpeedPART #: 0177-2032-CH 0177-2032-SMB

TAG BRACKET

FITMENT: 86-UP, FXST, PASSENGER PEG MOUNTPART #: 0215-2005-BP 0215-2005-CH 0215-2005-TBP

FITMENT: HORIZONTAL, CUSTOM APPS. , FENDER MOUNTPART #: 0215-2006-BP 0215-2006-CH 0215-2006-TBP

FITMENT: HORIZONTAL 86-UP, XL SPORTSTER, SHOCK MOUNTPART #: 0215-2007-BP 0215-2007-CH 0215-2007-TBP

FITMENT: VERTICAL 86-UP, XL SPORTSTER, SHOCK MOUNTPART #: 0215-2008-BP 0215-2008-CH 0215-2008-TBP

ALL NEW PRODUCTS SHOWN ARE AVAILABLE IN

CHROME (CH) BLACK OPS (SMB)(TBP)CONTRAST CUT (BM)(BH)

STEERING STEM NUT

FITMENT: 06-UP, FXST + WE, 08-11 FXCWPART #: 0208-2063-BM 0208-2063-CH 0208-2063-SMB

FITMENT: 89-UP, FLST,87-09, FXR, FXD, XLWEPART #: 0208-2063-BM 0208-2063-CH 0208-2063-SMB

FITMENT: 2010-UP, XL NARROW GLIDEPART #: 0208-2065-BM 0208-2065-CH 0208-2065-SMB

VENTURI AIR CLEANER - NOSTALGIA

FITMENT: 91-UP, XL SPORTSTERPART #: 0206-2070-CH 0206-2070-BH 0206-2070-SMB

FITMENT: 93-UP, TWIN-CAM EVOPART #: 0206-2071-BH 0206-2071-CH 0206-2071-SMB

FITMENT: 08-UP, FL/FLHTPART #: 0206-2072-BH 0206-2072-CH 0206-2072-SMB

FITMENT: 93-06, BIG TWIN WITH S&S E/G CARBPART #: 0206-2073-BH 0206-2073-CH 0206-2073-SMB

REAR MASTER CYLINDER CAP - CAFE

FITMENT: 04-UP, XLPART #: 0208-2066-BM 0208-2066-CH 0208-2066-SMB

REAR MASTER CYLINDER CAP - NOSTALGIA

FITMENT: 04-UP, XLPART #: 0208-2076-BM 0208-2076-CH 0208-2076-SMB

FRONT MASTER CYLINDER CAP - NOSTALGIA

FITMENT: 96-03 XL, 96-08 FXD/ST, 96-04 FLPART #: 0208-2072-BH 0208-2072-CH 0208-2072-SMB

FITMENT: 96-03 XL, 05-07 FL, 06-10 FXDPART #: 0208-2073-BH 0208-2073-CH 0208-2073-SMB

FITMENT: 08-10 FLPART #: 0208-2074-BH 0208-2074-CH 0208-2074-SMB

FITMENT: 04- 10 XL SPORTSTERPART #: 0208-2075-BH 0208-2075-CH 0208-2075-SMB

3-3 BB

FRFRRFRONONONTT ERERER CCYLYL

733-C-C SMSS

AAP P P P --- NONONN SS

CLCLCLUTUTUTUTCHCHCHC CCCOVOVOVO ERERRR --- CCCCLALALARIRIRITYTYTYY

RIRRIRISESEES R R R PLPLP UGUGUGU SSETETETT

FORK PRE-LOAD ADJUSTER

FITMENT: 39MMPART #: 0208-2061-BM 0208-2061-CH 0208-2061-SMB

FITMENT: 49MMPART #: 0208-2062-BM 0208-2062-CH 0208-2062-SMB

-2-207076-6 BMMBM 00202008-8-8-8-202076766-C-CHHH 02020 0808-2-22007076-6 SMMBB

image not available

please note

604

High Pressure Gas Monotube

Threaded Preload Adjuster

Defl ective Disc Damping

Hard Anodized Internal Coating

Adjustable Compression Damping

Lifetime Limited Warranty and Rebuildable

Available for Dyna, XR1200, Sportster & Triumph, including Thruxton, Scrambler and Bonneville (more on the way).

Inspired by racers, riders and those that demand more

of their bikes than weekend coffee runs. The built in

the USA 970 Series shocks combine a high pressure

gas monotube design with defl ective disc damping

routed through two unique circuits and adjustable for

compression damping via an easily accessible knob.

Tune to your riding style and pin the throttle.

610

Built around our all new Frequency Sensing Technology

(FST), and wrapped in a state of the art set of springs

that allows your bagger to sit lower than stock, but

retain the full down travel of a factory set up! The 944

Series combines a progressive rate main spring with a

fl at wire compensator spring that compresses under the

weight of the bike, but readily extends when needed to

allow for full drop travel. The result is a bike with a 1

lowered height that rides better than a stocker!

Frequency Sensing Technology (FST), Allows the shocks to sense the frequency of a bump and automatically adjust damping for superior ride quality

Adjust spring pre-load by hand, no special tool needed

Progressive Rate Main springs specifi cally designed for touring

High Pressure gas charged for consistent performance

Lifetime Limited Warranty and Made in USA!


Frequency Sensing Technology (FST), Allows the shocks to sense the frequency of a bump and automatically adjust damping for superior ride quality

Defl ective disc valving

Adjust spring pre-load by hand, no special tool needed

Progressive rate spring

Standard or heavy duty spring rate and black or chrome fi nish

Lifetime Limited Warranty & made in USA

Available in 11.0 inch to 13.5 inch lengths

After more than a decade of ruling the roads with our road

proven 440 Series shocks, Weve unveiled another breakthrough

design. Dubbed Frequency Sensing Technology (FST) for its

unique ability to dynamically adjust damping as you ride. The

result is superior performance no matter the road conditions. A

top mount threaded preload adjuster allows for fi ne tuning with

a simple twist of the cap.

612

High pressure gas charged monotube forconsistant damping performance

Progressive rate springs available in standard or heavy duty rates

Chrome covers with chrome springs or contrast cut black anodized with black springs

Lifetime Limited Warranty

Available in lengths from 11.0 inch to 13 inch

We have once again upped the ante with the street rod

styled 430 series of shocks. Utilizing a high pressure

gas mono tube design with defl ective disk damping

to insure high performance ride control, the 430 Series

can also be mounted rod up or rod down, depending

on your application. Threaded pre-load adjusters

allow for tool-less adjustment, and effortless tuning

of ride quality. First of their kind, machined aluminum

spring perches are complimented by smooth lines

and a polished chrome body.


Chrome air chamber

Multi-stage velocity sensitive damper

Unique internal bumper, cushions even the hardest hits

Up to 2.5 of height adjustment on most Touring models

Optional easy to install compressor (mounts in saddlebag)

AirDragger Shocks for HD Touring models (1980 and up)

EasyMount Compressor for HD Touring models (1980 and up)

By combining a machined aluminum air chamber, velocity

sensitive, multi-stage valving and an internal progressive rate

coil spring, weve once again elevated air suspension to a new

level. The clean and simple full chrome body mounts to all late

model touring bikes and is powered by a clever compressor

unit that simply mounts into the back of a saddlebag. Effortless

installation, up to 2.5 of on-the-fl y height adjustment and an

economical price is a hard to beat combination!

614

All steel double wall damper with multistage velocity sensitive damping

5-Position cam style preload adjuster

High pressure gas charged for consistant damping performance

Standard or heavy-duty progressive rate springs in either chrome or black

Optional full chrome or black covers on select applications

Simply the best value shock on the market today.

The 412s proven, durable design means they will

be an improvement to your motorcycles suspension

performance. The double-wall steel body construction

with nitrogen charged, multi-staged velocity sensitive

valving gives you smooth, consistent damping. A fi ve

position cam style preload adjuster lets you dial in your

ride whether youre a light rider or heavy hitter. Standard

or Heavy-Duty, and lengths from 11 to 14.2, there is

sure to be a 412 thats right for you and your bike.


Custom tuned multistage damper

Precision machined aircraft grade aluminumair chamber

Replaceable air & oil seals

Standard air fi tting is adaptable to most stockair fi ll systems

Standard dust boot for additional protectionagainst the elements

Rebuildable

The Original Air Shock features a machined

aluminum air chamber for perfect sealing surfaces,

heavy duty springs, air adjustability and velocity

sensitive, multi-stage valving. The 416 Series is

the perfect choice for the touring rider who carries a

varied load. Air lines and fi ttings are easily installed.

An optional adapter kit is available for most touring

bikes to tap into the stock air fi ll system (fi ll valve or

air compressor).

616

Five position cam style preload adjuster

Standard or heavy-duty progressive rate springs in chrome or black (sold separately)

12 Series shocks are dampers only. Progressive Suspension springs can be mated for a customized ride

13 Series twin shocks for off road applications - dampers only. PS springs can be mated for a customized ride

14 Series twin shocks for vintage applications are dampers only. PS springs can be mated for a customized ride

With shock and fork spring fi tments all the way

back to 1949, Progressive Suspension likely has

the suspension setup you need for your restoration,

AHRMA racer or vintage machine. The 12, 13 & 14

Series shocks are sold as damper sets and can be

mated to a number of springs to properly tune for

your application. For the best information, check out

the search utility on:

www.progressivesuspension.com


CHROME plated

2 INCHES of ride height adjustment

Preload adjustable

High pressure gas charged monotube for consistant damping performance

Now available in HEAVY DUTY version!

1989 and up Softail applications

Our suspension system for the venerable Softail style

chassis is exclusively available as an adjustable ride

height version. Progressive Suspension was the fi rst

MAG Europe First Edition Catalog Section 3

Documents

Transcript of MAG Europe First Edition Catalog Section 3