Locking Devices - Lloyd Worrall Devices.pdf · Locking Devices Lockcases|Cylinders|Standards Lloyd...
Transcript of Locking Devices - Lloyd Worrall Devices.pdf · Locking Devices Lockcases|Cylinders|Standards Lloyd...
Locking DevicesLockcases|Cylinders|Standards
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
Technical Details
Digit 1: Category of use
1 = Light use. For use by people with a high incentive to exercise care and with a small chance of misuse.
2 = Normal use. For use by people with some incentive to exercise care but where there is some chance of misuse.
3 = Extreme use. For use by people where there is little incentive to exercise care and where there is a high chance of misuse.
Digit 2: Durability
A = 50,000 test cycles; no load on latch bolt.
B = 100,000 test cycles; no load on latch bolt.
C = 200,000 test cycles; no load on latch bolt.
F = 50,000 test cycles; 10 N load on latch bolt.
G = 100,000 test cycles; 10 N load on latch bolt.
H = 200,000 test cycles; 10 N load on latch bolt.
L = 100,000 test cycles; 25 N load on latch bolt.
M = 200,000 test cycles; 25 N load on latch bolt.
R = 100,000 test cycles; 50 N load on latch bolt.
S = 200,000 test cycles; 50 N load on latch bolt.
W = 100,000 test cycles; 120 N load on latch bolt.
X = 200,000 test cycles; 120 N load on latch bolt.
Digit 3: Door mass and closing force
1 = up to 100kg door mass; 50 N maximum closing force.
2 = up to 200kg door mass; 50 N maximum closing force.
3 = above 200kg door mass or specified by the manufacturer; 50 N maximum closing force.
4 = up to 100kg door mass; 25 N maximum closing force.
5 = up to 200kg door mass; 25 N maximum closing force.
6 = above 200kg door mass or specified by the manufacturer; 25 N maximum closing force.
7 = up to 100kg door mass; 15 N maximum closing force.
8 = up to 200kg door mass; 15 N maximum closing force. 9 = above 200kg door mass or specified by the manufacturer; 15 N maximum closing force.
Digit 4: Suitability for use on fire/smoke doors
0 = not approved for use on fire/smoke resisting door assemblies.
1 = suitable for use on fire/smoke resisting assemblies, subject to satisfactory assessment of the contribution of the lock or latch to the fire resistance of specified fire/smoke resisting door assemblies.
Digit 5: Safety
Only 1 grade of safety is identified.
0 = no safety requirement.
Digit 6: Corrosion resistance and temperature
0 = no defined corrosion resistance, no temperature requirement.
A = low corrosion resistance, no temperature requirement.
B = moderate corrosion resistance, no temperature requirement.
C = high corrosion resistance, no temperature requirement.
D = very high corrosion resistance, no temperature requirement.
E = moderate corrosion resistance, temperature requirement from
-20ºC to +18ºC.
F = high corrosion resistance, temperature requirement from -20ºC
to +18ºC.
G = very high corrosion resistance, temperature requirement from
-20ºC to +18ºC.
Digit 7: Security and drill resistance
1 = minimum security and no drill resistance.
2 = low security and no drill resistance.
3 = medium security and no drill resistance.
4 = high security and no drill resistance.
5 = high security with drill resistance.
6 = very high security and no drill resistance.
7 = very high security with drill resistance.
Digit 8: Field of door application
15 grades of door application are identified and summarised in the table below:
Grade Type Application 1 Application 2 Application 3 A Mortice Unrestricted application B Mortice Hinged door C Mortice Sliding door D Rim Unrestricted application E Rim Hinged door F Rim Sliding door G Bored lock Unrestricted application H Mortice Hinged door Supported J Rim Hinged door Inwards K Mortice Hinged door Locked from inside L Mortice Sliding door Locked from inside M Rim Hinged door Locked from inside N Rim Sliding door Locked from inside P Mortice Hinged door Supported Locked from inside
R Rim Hinged door Inwards Locked from inside
BS EN 12209: 2003 Mechanically operated locks, latches and locking plates.
Products tested to British and European standards provide greater durability, longer warranty periods, peace of mind and evidence of professional specification.
Under the standard each product is tested and classified accordingly to show its compliance.
The identification of an 11-digit code is visible on the individual product. Each digit represents a category and how it measured against the standard to which it was tested.
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
Technical Details
Digit 9: Type of key operation and locking
0 = not applicable.
A = cylinder lock or latch, manually locking.
B = cylinder lock or latch, automatically locking.
C = cylinder lock or latch, manually locking with intermediate
locking.
D = lever lock or latch, manually locking.
E = lever lock or latch, automatically locking.
F = lever lock or latch, manually locking with intermediate locking.
G = lock or latch without key operation, manually locking.
H = lock without key operation, automatically locking.
Digit 10: Type of spindle operation
0 = lock or latch without follower.
1 = lock or latch for knob or sprung lever handle operation.
2 = lock or latch for unsprung lever handle operation.
3 = lock or latch for heavy duty unsprung lever handle operation.
4 = lock or latch for heavy duty unsprung lever handle operation
specified by the manufacturer.
Digit 11: Key identification requirement
0 = no requirements.
A = minimum three detaining elements.
B = minimum five detaining elements.
C = minimum five detaining elements, extended number of
differs.
D = minimum six detaining elements.
E = minimum six detaining elements, extended number of
effective differs.
F = minimum seven detaining elements.
G = minimum seven detaining elements extended number of
effective differs.
H = minimum eight detaining elements, extended number of
effective differs.
Example:
The above code signifies a mechanically operated lock and locking plate for use in an application where people have an incentive to exercise care, able to withstand a durability of 200,000 cycles with a 10 N load on the latch bolt, on a door with a mass of up to 200kg and a maximum closing force of 25N, suitable for use on a fire/smoke resisting door assembly, no safety requirement, moderate corrosion resistance in temperatures ranging from -20ºC to +18ºC, with high security and drill resistance for any use in any mortice application, with a manual locking lever lock or latch unsprung lever handle operation, a minimum of five deadlocking elements and an extended number of effective differs.
Marking:
The standard requires the following additional information to accompany the CE Marking required for locks and latches intended for use on fire resisting doors and smoke control doors.
a) The identification number of the notified certification body.
b) The name or identifying mark of the manufacturer.
c) The registered address of the manufacturer.
d) The last two digits of the year in which the marking was applied.
e) The number of the EC certificate of conformity, reference to EN 12209:2003.
f ) The classification code of the product.
BS EN 12209: 2003 Mechanically operated locks, latches and locking plates.
2 H 5 1 0 E 5 A F 2 C
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
Euro Locks
5585
24
150235
European lock case range produced to DIN standardsand dimensions, o ering reliable heavy duty locks instandard applications.
All 55mm backset only.
Single throw deadbolt locks are suitable for use withunsprung lever handles.
Investment casting of the followers and guideddeadbolt mechanism make this a severe duty range.
BS EN 12209
Produced to DIN Standards and dimensions
S t andards
Satin stainless steelPolished brass
Finishes
12mm and 25mm rebate sets are available.
Reb ate Sets
IL002
Sashlock
IL001
Deadlock
IL003
Bathroom Lock
IL004
Latch
IL005
Escape Nightlatch
IL006
Anti-thrust Escape Nightlatch
IL007
Anti-panic Sashlock
Available radius and square.
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
Versatile Locks
Nightlatch Snib Holdback
IL014
Nightlatch No Holdback Escape Nightlatch NoHoldback
Escape Nightlatch Snib Holdback
IL015 IL016 IL017
HEAVY DUTY HIGH SECURITY SPECIAL APPLICATION LO CKS
Escape Sashlock
IL019
Escape Deadlock
IL020
Internal – lift lever to lock depresslever to withdraw latch anddeadbolt simultaneously
External – lever operates latch boltonly, cylinder operatesdeadbolt
Internal – lift lever to lock depress lever to unlock
External – cylinder operates deadbolt
Both locks must use single cylinders only
HEAVY DUTY AUTO DEADLOCKING
Escape nightlatch non deadlocking version IL018
57
25.4 77
110
16
153
A comprehensive series of locks giving standardand special applications.
Heavy duty high security locking options.
The same case accepts British oval andEuropean pr cylinders. Available with square or radius forend.
All locks come with boxed keeps.
Sashlock
IL010
Deadbolt30 x 11mm20 mm throw
Latchbolt11.5mm throw
Heavy Duty – High Security
Deadlock
IL011
Bathroom Lock
IL012
Latch
IL013
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
Modular Lockcases
50
22 74
150225
18.5
This severe duty range of locks o er a vast array of interchangeable applications. Using asymmetrical modular system gives the ability tochange the function of the door easily. Compatiblewith Scandinavian oval cylinders only. The cylinderfollower is above the handle line. Supplied withradius forends, ideal for factory prepared doors.Lockcases have a substantial 21mm throw deadbolt and 14mm projecting latchbolt. Uses unsprung lever handles only.
Standard
IL021-AIL021-B
For bathroom lock useeither standard sashlockor standard deadlockwith 62.0500 5mmfollower conversion for use with indicatorand turn.
Sash l ock
High Security Escape Function
IL022-AN/A
IL023-AIL023-B
50mm70mm
Standard
IL024-AIL024-B
Dead l ock
High Security Sliding Door(hookbolt)
IL025-AIL025-B
IL026-AN/A
50mm70mm
With SnibHoldback
IL027-AIL027-B
Nightl at ch (Auto-Dead l ocking)
With Faceplate Key Holdback
No Holdback Non Auto-Deadlocking
IL028-AIL028-B
IL029-AIL029-B
IL030-AIL030-B
50mm70mm
Case
Case
Case
For BS EN179 escape functions, refer to Escape Hardwarebrochure.
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
Modular Lockcases
Heavy SprungNo Hold Open
IL031-AIL031-B
Heavy SprungFaceplate Key
Holdback
Light SprungNo Hold Open
Light Sprung Faceplate Key
Holdback
IL032-AIL032-B
IL033-AIL033-B
IL034-AIL034-B
SCP – Satin chrome platedPB – Polished brass platedPCP – Polished chrome plated
Finishes
BS EN 12209
Standards
Escape Nightlatch – Auto Deadlocking
50mm70mm
Heavy Sprung No Hold Open
Non Deadlocking
N/AIL032-B
With Snib Holdback
IL036-AIL037-B
With Faceplate Key Holdback
No Holdback Escape Function
IL037-AIL037-B
IL038-AIL038-B
IL039-AIL039-B
hctaL )gnikcoldaeD-otuA( kcoL hctaL elbuoD
50 mm70 mm
Handing De tails
Standard Latch
IL040-AIL040-B
13mm, 19mm and 25mm rebate sets are available.
REB ATE SETS
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
British Locks
A traditional range of locks to typical British dimensions, giving standard lockingfunctions applicable to most common uses. Available pierced to take British Oval andEuro cylinders or 5 lever, where applicable. Light sprung (LS) or heavy sprung (HS)dependent on furniture selected. Brass latch and deadbolt with hardened steel rollers.
Detailed here are just a few functions. There are many special applications and non-standard locking solutions. Please contact Lloyd Worrall for further information.
British OvalCylinder
IL041-AIL041-BIL041-C
Sash l ock
1
(45) (57) (82)
European Pr Cylinder
5 Lever Locking
IL042-AIL042-BIL042-C
IL043-AIL043-BIL043-C
Case63mm76mm
102mm
IL048-AIL048-AIL048-C
IL049-AIL049-BIL049-C
N/AIL050-B
N/A
N/AIL051-B
N/A
Case63mm76mm
102mm
Backset45mm57mm82mm
152 108
25(63) (76) (102)
(45) (57) (82)
Bathroom Locks
5mm DeadboltFollower Sashlock
8mm DeadboltFollower Sashlock
5mm DeadboltFollower
8mm DeadboltFollower
Dead l ock
British OvalCylinder
IL044-AIL044-BIL044-C
134
25(63) (76) (102)
(45) (57) (82)
76
European Pr Cylinder
British OvalCylinder Clawbolt
5 Lever Locking
IL045-AIL045-BIL045-C
N/AIL046-B
N/A
IL047-AIL047-B
N/A
Case63mm76mm
102mm
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
British Locks
108
UprightMortice Latch
IL052-AIL052-BIL052-C
Small CaseMortice Latch
Pocket CaseMortice Latch
IL053-AIL053-B
N/A
N/AIL054-B
N/A
Backset45mm57mm82mm
5 lever locks available master keyed or keyed alike.
Satin stainless steel, brass, bronze metal, antique, polished chrome.
Finishes
Lat ch
Case63mm76mm102mm
British OvalCylinder Sashlock
IL055-AIL055-B
5 Lever Locking Sashlock
Mortice Bathroom Lock
Mortice Latch
IL056-AIL056-B
IL057-AIL057-B
IL058-AIL058-B
Horizon tal
Case127mm151mm
Backset Centres45mm 57mm57mm 70mm
13mm, 19mm and 25mm rebate sets are available.
Reb ate Sets OPTIONS
Horizon
Indicator bolts
IL201 Turnbolt with indicator release.
IL202 Extended turnbolt with indicator release.
IL203 Budget turnbolt with indicator release.
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
A narrow style range of locks for the fabrication market.
Covering all the popular functions this is an ideal accompaniment to the other
ranges.
Standard stock backset of 30mm.
Also available in 25mm, 35mm,40mm and 45mm backset.
Options
SSS – Satin stainless steel.
Finishes
245
24
199
45
DIN 18251. BS EN 12209.
Standards
IL063
Deadlock
IL064
Sliding Door Lock
IL065
Small Case Deadlock
IL060
Sashlock
IL061
Rollerbolt Sashlock
IL062
Anti-panic Lock
IL066
Escape Nightlatch
IL067
Latch
Narrow Style Locks30
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
Detainer Locksnightl at ch
5 lever l ocks
80 25
148
44
200
Internal handle, external key, with snib holdback facility.
IL070-LH Lockable Internal Handle LH
IL071-LH Non-lockable Internal Handle LH
IL070-RH Lockable Internal Handle RH
IL071-RH Non-lockable Internal Handle RH
13mm, 19mm and 25mm rebate sets are available.
Most door furniture can be used with this lock with minor adjustment. Please indicate which door furniture is to be used with these locks.
73 25
148
44
200
73 29
122
44
178
IL073 Standard Deadlock Function
IL072 Standard Sashlock Function
SSS – Satin stainless steel.BRS – Brass.
Finishes
Restricted key duplication (RKS). Master keyed with each other (MK).Can be with microswitch. Single Pole (SP) or Double pole (DP).
Options
Sash l ock
CE Marked.BS3621-1997 (IL073)
Standards
13mm, 19mm and 25mm rebate sets are available.
Most door furniture can be used with this lock with minor adjustment. Please indicate which door furniture is to be used with these locks.
13mm, 19mm and 25mm rebate sets are available.
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
Cylinders
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
Technical Details
Digit 1: Category of use
Only one category is identified. 1 = keys shall resist a torque of 2.5Nm and still be usable.
Digit 2: Durability
Three grade of durability will classify cylinders as either grade 4, 5 or 6 based
on the number of test cycles achieved.
4 = 25,000 cycles.
5 = 50,000 cycles.
6 = 100,000 cycles.
Key strength is also tested to ensure there is no failure of the key within the durability test.
Digit 3: Door mass
No requirement.
Digit 4: Fire resistance
0 = no requirement.
1 = cylinders shall be fire tested in accordance with current fire test requirements or BS EN 1634-1.
Digit 5: Safety
No requirement.
Digit 6: Corrosion resistance
0 = no requirement.
A = conforms to grade 3 of BS EN 1670 as a minimum.
B = will resist temperature extremes of -20/+80ºC
C = conforms to grade 3 of BS EN 1670 as a minimum and will resist temperature extremes of -20/+80ºC.
Digit 7: Key security
Cylinders are classified in grades 1 to 6, where 6 is the highest. The grade can differ from one side of a double cylinder to the other. The table below provides a summary of the main security criteria:
Digit 8: Attack resistance
Cylinders are classified in grades 0, 1 and 2, where 2 is the highest. The table below provides a summary of the main requirements:
Example:
The above code signifies a cylinder meeting the required category of use, durability grade 6 with no fire resistant requirement, will resist temperature extremes of -20/+80 ºC, has a grade 3 key security and grade 1 attack resistance.
Marking:
This standard requires that the classification relevant to the cylinder shall be quoted in the accompanying documentation, on its labelling or packing and/or by marking the product itself or by more than one of these methods.
The marking/labelling shall include the following:
a: manufacturer’s name or trademark, or other means of
identification,
b: product model identification,
c: the 8 digit classification listed above,
d: number of this European standard.
BS EN 1303: 2005 Revision 1 Cylinders for Locks Requirements and Test Methods
Products tested to British and European standards provide greater durability, longer warranty periods, peace of mind and evidence of professional specification.
Under the standard each product is tested and classified accordingly to show its compliance. The identification of an 8-digit code is visible on the individual product. Each digit represents a category and how it measured against the standard to which it was tested.
Requirement UnitGrades
1 2 3 4 5 6
Min number of effective differs
Number 100 300 15,000 30,000 30,000 100,000
Min number of movable detainers
Number 3 3 5 5 6 6
Max number of steps
- 100 70 60 60 60 50
Direct coding on key
% Yes Yes No No No No
Torque resistance of plug/cylinder
Nm 2.5 5 15 15 15 15
Grade
0 1 2
Resistance to drilling (nett drilling time) - 3 mins 5 mins
Resistance to chisel attack (number of defined blows)
- 30 40
Resistance to twisting attack (number of defined twists)
- 20 30
Resistance to plug/cylinder extraction (pull load)
- 15 kN 15 kN
1 6 - 0 - B 3 1
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
LOCK
CHA
RTSy
stem
no.
Proj
ect:
Clie
nt:
Bran
d:
Not
es:
Dat
e:Si
gnat
ure:
latoT
kraM .tl
Agnikra
Me
man yeK
so
P 0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
0020
0021
0022
0023
0024
0025
LengthInt. Ext.
DesCylinderType
TotalCyl Key
CylinderMarking
Cylinder namePos
000100020003000400050006000700080009001000110012001300140015001600170018001900200021002200230024002500260027002800290030003100320033003400350036003700380039004000410042004300440045004600470048004900500051005200530054005500560057005800590060
AB
CD
EF
GH
I
Lloyd
Wor
rall
Arc
hite
ctur
al Ir
onm
onge
ry I
Acc
ess C
ontro
l I D
oor A
utom
atio
n
11 pin patented cylinders
Turn Small (9)Round Turn (1)
Turn Large (6)Oval Turn (7)
cylinder with thumbturns
Six pin tumblers plus sidebar mechanism with sidepins. Mechanism and keyblanks areprotected by worldwide patents. Incorporates anti-drill and anti-pick protection. 1.9 billionusable combinations. Dual security levels may be combined with lower cost medium securitycylinders in the same system. Designed for large or complex master key systems. Assembledin our workshop facility.
There is a strict registration procedure and all keys are uniquely marked for greater key control.
IL102-AIL102-BIL102-C
Oval Turn (7)
IL109-AIL109-BIL109-C
61mm71mm81mm
61mm71mm81mm
IL104-AIL104-BIL104-C
IL105-AIL105-BIL105-C
Stainless Steel (9)Turn (Small)
Large Turn (1)
IL103-AIL103-BIL103-C
Stainless Steel (6)Turn (Large)
IL111-AIL111-BIL111-C
IL112-AIL112-BIL112-C
IL110-AIL110-BIL110-C
61mm71mm81mm
61mm71mm81mm
Euro
Oval
Euro
Oval
IL107-AIL107-BIL107-C
Euro 40mm45mm50mm
IL113-AIL113-BIL113-C
Oval
1, 7: SCP, PCP, PB. 6, 9: SSS.
Finishes
Single Turn
40mm45mm50mm
Specify Turn (1,6,7 or 9) when ordering.
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
11 pin patented cylinders
Satin chrome plated, polished chrome plated, polished brass,black chrome (padlocks).
Finishes
International Patent protected. BS EN 1303 grade 5 cylinder.BS EN 12320 grade 3 to 6 padlocks.
Standards
elgniSelbuoD
Single Outsid e Single Internal
Pad l ocks
IL106-AIL106-BIL106-C
IL101-AIL101-BIL101-C
IL114-AIL114-BIL114-C
IL108-AIL108-BIL108-C
61mm71mm81mm
61mm71mm81mm
Euro
Oval
IL120 IL121 IL122 IL123
Rim Cylinde r Screw IN MORTICE CYLINDER
IL118 IL119
Round
IL115 IL116
Scandinavian Oval
40mm45mm50mm
40mm45mm50mm
IL124 IL125
IL117
Scandinavian double cylinder consists of1 each of IL115 and IL116.
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
5 pin patented cylinders
Turn Small (9)Round Turn (1)
Turn Large (6)Oval Turn (7)
cylinder with thumbturns
by international patents.
Assembled in our own workshops.
IL130-AIL130-BIL130-C
Oval Turn (7)
IL134-AIL134-BIL134-C
61mm71mm81mm
61mm71mm81mm
IL132-AIL132-BIL132-C
IL133-AIL133-BIL133-C
Stainless Steel (9)Turn (Small)
Large Turn (1)
IL131-AIL131-BIL131-C
Stainless Steel (6)Turn (Large)
IL136-AIL136-BIL136-C
IL137-AIL137-BIL137-C
IL135-AIL135-BIL135-C
61mm71mm81mm
61mm71mm81mm
Euro
Oval
Euro
Oval
IL138-AIL138-BIL138-C
Euro 40mm45mm50mm
IL139-AIL139-BIL139-C
Oval
1, 7: SCP, PCP, PB. 6, 9: SSS.
Finishes
Single Turn
40mm45mm50mm
Specify Turn (1,6,7 or 9) when ordering.
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
5 pin patented cylinders
Satin chrome plated, polished chrome plated, polished brass,black chrome (padlocks).
Finishes
International Patent protected. BS EN 1303 grade 4. BS EN 12320 grade 3.
Standards
elgniSelbuoD
Single Outsid e Single Internal
Pad l ocks
IL141-AIL141-BIL141-C
IL140-AIL140-BIL140-C
IL143-AIL143-BIL143-C
IL142-AIL142-BIL142-C
61mm71mm81mm
61mm71mm81mm
Euro
Oval
IL148 IL149 IL150 IL151
Rim Cylinde r Screw IN MORTICE CYLINDER
IL146 IL147
Round
IL144 IL145
Scandinavian Oval
40mm45mm50mm
40mm45mm50mm
IL117
Scandinavian double cylinder consists of1 each of IL144 and IL145.
L loyd Worral l GB nationwide
YannedisLondon
MB ArchitecturalBelfast
Class ic HardwareYork
Lloyd Worrall Group...Providing Solutions
Lloyd Worrall Yannedis Classic Hardware MB Architectural
part of Grafton Group plcLloyd Worrall Group
This brochure is not intended to be used for project specification. It offers an overview of the products and services available. If however, a product is specified from this brochure you are advised to contact us first to check if there have been any changes or alterations to the product specification.
The information contained in this brochure in both text and picture format is believed to be accurate and correct at time of going to press. However, due to circumstances beyond our control, and with a policy of continued product and service development, the information contained may be subject to change. We therefore reserve the right to alter or adjust any details illustrated in this brochure without prior notice.
Lloyd Worrall, Yannedis, Classic Hardware and MB Architectural are trading divisions of Macnaughton Blair Ltd. Registered Office: 10 Falcon Road, Belfast, BT12 6RD. Company registered in Northern Ireland NI 23032. VAT Registration No. GB 2517 48650.
The QuadrantSuite 6B, 99 Parkway AvenueSHEFFIELDS9 4WGT: 0114 213 2860E: [email protected]
Lloyd WorrallUnits 13-16, Noble Street Ind. Est.off Scotswood RoadNEWCASTLE UPON TYNENE4 7PDT: 0191 226 0888F: 0191 226 0803E: [email protected]
www.lloydworrall.co.uk
Lloyd Worrall incorporating Classic HardwareUnit 10, Attercliffe Common Ind. Est.Fell RoadSHEFFIELDS9 2ALT: 0114 244 3350F: 0114 244 4219E: [email protected]: [email protected]
www.lloydworrall.co.uk www.classichardware.co.uk
Lloyd WorrallUnit 2, Bilton RoadBletchleyMILTON KEYNESMK1 1HWT: 01908 622 650F: 01908 622 651E: [email protected]
www.lloydworrall.co.uk
Lloyd WorrallUnit 2, Tenax CrossTenax Road, Trafford ParkMANCHESTERM17 1AZT: 0161 873 5301F: 0161 873 5302E: [email protected]
www.lloydworrall.co.uk
YannedisSuite G9B, 9-11 Gunnery TerraceRoyal ArsenalLONDONSE18 6SWT: 020 8301 8320 F: 020 8301 8321E: [email protected]
www.yannedis.com
MB Architectural14a Falcon RoadBELFASTBT12 6RDT: 028 9038 0200 F: 028 9038 0201 E: [email protected]
www.mbarchitectural.com