Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

24
Leviton’s Industrial Grade Locking Devices are built to provide unparalleled quality and superior performance in the most severe industrial settings. The Leviton line includes a comprehensive selection of rugged plugs and connectors, Wetguard plugs and connectors for water and moisture resistance, flanged inlets and out- lets, California-style devices, midget locking devices, power-interrupting devices and non-NEMA devices. Our V-0-MAX Locking Flush Receptacles are designed for maximum performance and feature a UL 94 V-0 Flammability Rating, the best flammability rating for a locking flush receptacle available today. INDUSTRIAL GRADE LOCKING DEVICES Overview___________________________J1 15 Amp Devices __________________J2–J4 15 Amp Cord Sets ___________________J2 20 Amp Devices __________________J4–J9 30 Amp Devices _________________J9–J13 Wetguard Devices 15 Amp _________________________J14 15 Amp Locking Cord Sets _________J14 20 Amp _____________________J14–J15 30 Amp _________________________J16 Non-NEMA Devices 15 & 20 Amp _____________________J17 30 & 50 Amp _____________________J18 50 Amp Non-NEMA “California Style” CS Devices ___________________________J19 Weather-Resistant Boots ____________J20 Power-Interrupting Devices __________J21 Midget Devices_____________________J22 Combination Locking and Straight Blade Devices ______________J23 Integrated Inlets and Outlets with Weather-Resistant Covers _______J23 Locking Devices Industrial Grade J SECTION Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Transcript of Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

Page 1: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

Leviton’s Industrial Grade Locking Devices are built toprovide unparalleled quality and superior performancein the most severe industrial settings. The Leviton lineincludes a comprehensive selection of rugged plugsand connectors, Wetguard plugs and connectors forwater and moisture resistance, flanged inlets and out-lets, California-style devices, midget locking devices,power-interrupting devices and non-NEMA devices.Our V-0-MAX™ Locking Flush Receptacles aredesigned for maximum performance and feature a UL 94 V-0 Flammability Rating, the best flammabilityrating for a locking flush receptacle available today.

INDUSTRIAL GRADE LOCKING DEVICES Overview___________________________J115 Amp Devices __________________J2–J415 Amp Cord Sets ___________________J220 Amp Devices __________________J4–J930 Amp Devices _________________J9–J13Wetguard™ Devices

15 Amp _________________________J1415 Amp Locking Cord Sets_________J1420 Amp _____________________J14–J1530 Amp _________________________J16

Non-NEMA Devices15 & 20 Amp _____________________J1730 & 50 Amp _____________________J18

50 Amp Non-NEMA “California Style” CSDevices___________________________J19Weather-Resistant Boots ____________J20Power-Interrupting Devices __________J21Midget Devices_____________________J22Combination Locking and Straight Blade Devices ______________J23Integrated Inlets and Outlets with Weather-Resistant Covers _______J23

LockingDevicesIndustrial Grade

JS E C T I O N

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 2: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J 1 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

Cat. No. 2610Cat. No. 4720-Cand 4579-C

Cat. No. 24W47 Cat. No. ML1-C

Locking Devices for the Entire Spectrum of Industrial Applications

Cat. No. 2336

Cat. No. 6034Cat. No. 7411-C

V-0-MAX™ Locking Flush ReceptaclesEngineered for maximum perfor-mance with a UL 94V-0 FlammabilityRating.

Midget Locking Devices

ML1, ML2 and ML3Locking devices cover-ing the entire spectrumof industrial applica-tions where restrainedspace considerationsare a factor.

Flanged Inlets and Outlets

Built to endure hard usewith rugged nylon flangesthat assure a smooth,flush fit and outstandingresistance to cracking and breaking.

Weather Resistant BootsFeature triple sealaction to protect locking plugs andconnectors from theharmful effects of dirtand moisture inharsh operations.

Non-NEMA LockingDevicesProvided in selected20A and 30A versionsand a very broadrange of 50A devices.

Locking DevicesLocking Devices

Wetguard™

Specifically developedfor wet or damp locations. EPTR ther-moplastic rubber bodyand rugged designresists water, acids,alkalies, grease, oilsand solvents.

Locking Plugs and ConnectorsHeavy-duty constructionfor top performance inthe environmentalextremes of gruelingindustrial settings.

Leviton’s Industrial Grade LockingDevices are built to provide unpar-alleled quality and superior perfor-mance in the most severe industrialsettings. The Locking Devices linerepresents a broad selection ofplugs and connectors, lockingreceptacles, flanged inlets and outlets, California-style devices,midget locking devices, powerinterrupting devices, and non-NEMA devices. Leviton combinesthe best materials available withsuperior production standards toproduce a broad selection ofLocking Devices of unmatched flexibility and dependability.

Features and Benefits■ Uncompromising industrial-grade

quality for superior performance andlong service life

■ All industrial locking devices feature heavy-duty, impact-resistantconstruction

■ Plugs and connectors accept widerange of conductors

■ Terminals clearly identified on alldevices to speed and simplify wiring

■ Backed by a Limited 10-YearWarranty

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 3: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J 2For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

LOCKING PLUGCat. No. 4720-C

Ø 1.53 (38.9 mm)

Ø 1

.39

(35.

3 m

m)

1.98 (50.4 mm)

Locking DevicesLocking Devices

4720-C

2547

SPECIFICATIONS & FEATURES• Locking Receptacles feature a complete

range of ratings and NEMA configurations,including isolated ground

• Locking Plugs and Connectors feature heavy-duty construction for top performance in theenvironmental extremes of grueling industrialsettings.

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

Dustguard• IEC IP44 Rated• Developed to withstand dusty and dirty envi-

ronments, cracking and fading, temperatureextremes

• Rugged wiring modules have high perfor-mance single-piece brass triple-wipe con-tacts, solid brass plug blades

• Self centering cord clamp accepts wide rangeof conductors, 18-3 SVT to 10-3SO

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed. Spec. Listed WC-596 (File #13393 –Cat. Nos. 2447, 2547, 4716, 4720, 4729; File#13399 – Cat. Nos. 4700, 4710, 4715)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

15 AMP Locking Devices15 AMP 125V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Dustguard™ Locking Plug, 2447 .240–.655 12–18High Visibility Yellow EPTR BodyDustguard™ Locking Connector, 2547 .240–.655 12–18High Visibility Yellow EPTR BodyDuplex Flush Receptacle, 4700Self Grounding, Back and Side WiredDuplex Flush Receptacle w/2 Hot 4702-IIRFeeds and 1 Neutral Return, Self Grounding, Back and Side WiredDuplex Flush Receptacle w/Split Feed — 4703-IIR2 Hot Feeds and 2 Neutral Returns, Self Grounding, Back and Side WiredDuplex Flush Receptacle, 4700-IGIsolated Ground, Back and Side WiredSingle Flush Receptacle 4710**

Single Flush Receptacle, w/Short Strap 4710-SS

Single Flush Receptacle, 4710-IG**Isolated GroundSingle Flush Receptacle, 4710-SIGIsolated Ground, w/Short StrapLocking Flanged Outlet 4715-C

Locking Flanged Inlet 4716-C

Locking Plug, Black Nylon Body 4720-C .245–.700 10–18

Lighted Locking Plug, Black Nylon Body 4720-PLC .245–.700 10–18

Angle Locking Plug, Black Nylon Body 4720-CA .245–.700 10–18

Locking Plug, All Black Nylon for 4720-CB .245–.700 10–18Stage and StudioLocking Plug, Yellow Nylon Body 4720-CY .245–.700 10–18

Locking Connector, Black Nylon Body 4729-C .245–.700 10–18

Lighted Locking Connector, 4729-PLC .245–.700 10–18Black Nylon BodyLocking Connector, All Black Nylon 4729-CB .245–.700 10–18for Stage and StudioLocking Connector, Yellow Nylon Body 4729-CY .245–.700 10–18

Factory-Assembled Cord Sets15 AMP 125V 2-Pole 3-Wire GroundingDESCRIPTION LENGTH CAT. NO. CAT. NO. NEMA

14/3 SOOW 12/3 SOOW CONFIG.Yellow Cord, B & W Devices★ 25' IL515-43A IL515-23A

Yellow Cord, B & W Devices★ 50' IL515-43B IL515-23B

Yellow Cord, B & W Devices★ 100' IL515-43C IL515-23C

**Uses stainless steel wallplate, Cat. No. 84004-40. For additional wallplate selections, please see Section GFor Corrosion Resistant Locking Devices, please check pages K2–K5.Weather-Resistant Boots for 15A Locking Plugs and Connectors are listed on page J20All devices are UL Listed. Also CSA certified except where indicated by★

L5-15P

W

G

L5-15R

W

G

L5-15P

W

G

L5-15R

W

G

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 4: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J 3 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

4570-CA

4579-C

Locking DevicesLocking Devices

15 AMP Locking Devices15 AMP 250V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Duplex Flush Receptacle, Self 4550Grounding, Back and Side WiredDuplex Flush Receptacle, Isolated 4550-IGGround, Back and Side WiredSingle Flush Receptacle 4560**

Single Flush Receptacle, w/Short Strap 4560-SS

Single Flush Receptacle, 4560-IG**Isolated GroundSingle Flush Receptacle, Isolated 4560-SIGGround, w/Short StrapLocking Plug, Black Nylon Body 4570-C .245–.700 10–18

Angle Locking Plug, Black Nylon Body 4570-CA .245–.700 10–18

Locking Plug, Yellow Nylon Body 4570-CY .245–.700 10–18

Locking Connector, Black Nylon Body 4579-C .245–.700 10–18

Locking Connector, Yellow Nylon Body 4579-CY .245–.700 10–18

Locking Flanged Outlet 4585-C

Locking Flanged Inlet 4586-C

15 AMP 277V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Duplex Flush Receptacle, Self 4750Grounding, Back and Side WiredDuplex Flush Receptacle, Islolated 4570-IGGround, Back and Side WiredSingle Flush Receptacle 4760**

Single Flush Receptacle, w/Short Strap 4760-SS

Single Flush Receptacle, 4760-IG**Isolated GroundSingle Flush Receptacle, Isolated 4760-SIGGround, w/Short StrapLocking Plug, Black Nylon Body 4770-C .245–.700 10–18

Lighted Locking Plug, Black Nylon Body 4770-PLC .245–.700 10–18

Angle Locking Plug, Black Nylon Body 4770-CA .245–.700 10–18

Locking Plug, Yellow Nylon Body 4770-CY .245–.700 10–18

Locking Connector, Black Nylon Body 4779-C .245–.700 10–18

Locking Connector, Yellow Nylon Body 4779-CY .245–.700 10–18

Lighted Locking Connector, 4779-PLC .245–.700 10–18Black Nylon BodyLocking Flanged Outlet 4785-C

Locking Flanged Inlet 4786-C

**Uses stainless steel wallplate, Cat. No. 84004-40. For additional wallplate selections, please see Section G.For Corrosion Resistant Locking Devices, please check pages K2–K5Weather-Resistant Boots for 15A Locking Plugs and Connectors are listed on page J20All devices are UL Listed and CSA certified.

SPECIFICATIONS & FEATURES• Locking Receptacles feature a complete

range of ratings and NEMA configurations,including isolated ground and non-grounding

• Locking Plugs and Connectors feature heavy-duty construction for top performance in theenvironmental extremes of grueling industrialsettings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed Spec. Listed WC-596 (File #E-13399— Cat. Nos. 4550, 4560,4585-C, 4750,4760,4785-C; File #E-13393 — Cat. Nos. 4570,4579, 4586-C, 4770, 4779, 4786-C)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

LOCKING CONNECTORCat. No. 4579-C

Ø 1

.53

(38.

9 m

m)

Ø 1

.39

(35.

3 m

m)

2.76 (70.1 mm)

ANGLE LOCKING PLUGCat. No. 4570-CA

Ø 1.53 (38.9 mm) 1.30 (32.9 mm)

2.11

(53

.6 m

m)

L6-15P

G

X

Y

L6-15R G

X

Y

L7-15PG

W

L7-15RG

W

Ø 1.75 (44.45mm) max.

Ø1.72 (43.66mm) min.

2.11 (53.57 mm)

SUGGESTED PANELOPENING FOR 15A,20A STRAIGHT BLADEAND 15A LOCKINGFLANGED INLETS AND OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 5: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

15 AMP Locking Devices15 AMP 3Ø 250V 3-Pole 3-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle ★ 4870**Single Flush Receptacle, 4870-SSw/Short Strap★

Locking Plug, Black Nylon Body★ 4880-C .245–.700 10–18Locking Connector, Black Nylon Body★ 4889-C .245–.700 10–18

20 AMP Locking Devices20 AMP 125V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle 2310†

V-0-MAX™ Single Flush Receptacle, 2310-IG†

Isolated GroundLocking Plug, Black Nylon Body 2311 .385–.780 10–18Lighted Locking Plug, Black Nylon Body 2311-PLC .385–.780 10–18Locking Plug, all Black 2311-B .385–.780 10–18for Stage and StudioLighted Locking Plug, 2311-PLB .385–.780 10–18All-Black Nylon BodyLocking Plug, Yellow Nylon Body 2311-CY .385–.780 10–18Locking Connector, Black Nylon Body 2313 .385–.780 10–18Lighted Locking Connector, 2313-PLC .385–.780 10–18Black Nylon BodyLocking Connector, all Black 2313-B .385–.780 10–18for Stage and StudioLighted Locking Connector, 2313-PLB .385–.780 10–18All-Black Nylon BodyLocking Connector, Yellow Nylon Body 2313-CY .385–.780 10–18Locking Flanged Inlet 2315Locking Flanged Outlet 2316

**Uses stainless steel wallplate, Cat. No. 84004-40. †Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section G.For Corrosion Resistant Locking Devices, please check pages K2–K5Weather-Resistant Boots for 20A Locking Plugs and Connectors are listed on page J20All devices are UL Listed. Also CSA certified except where indicated by★

J 4For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

2310

2313

SINGLE LOCKING RECEPTACLECat. No. 2310

1.31 (33.2 mm)

1.06 (26.8 mm)

2.67

(67

.8m

m)

3.63

(92

.1 m

m)

0.75 (19.1 mm)

1.69 (42.8 mm)

2.38

(60

.3 m

m)

Ø 1

.56

(39

.7 m

m)

3.28

(83

.3 m

m)

2.47 (63.0 mm)

Ø 1

.84

(47.

0 m

m)

Ø 2

.08

(53.

0 m

m)

LOCKING PLUGCat. No. 2311

L11-15PZ

X

Y

L11-15RZ

X

Y

Locking DevicesLocking Devices

SPECIFICATIONS & FEATURES• V-0-MAX™ Locking Receptacles carry a UL

94 V-0 Flammability Rating, the best rating ofany material used in Industrial Locking FlushReceptacle available today

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed Spec. Listed WC-596 (File #E-13399— Cat. Nos. 4870, 2310, 2316; File #E-13393 — Cat. Nos. 4880-C, 4889-C,2311, 2313, 2315)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

L5-20PW

G

L5-20R

W

G

Ø 2.50 ± 0.01(63.5 mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.13 ± 0.01(54.0 mm ± 0.3)

120° 120°

PANEL OPENING FOR ALL 20A / 30A3 WIRE INLETS &OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 6: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J 5 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

2340

2341

SINGLE RECEPTACLE, ISOLATED GROUNDCat. No. 2340-IG

1.43 (36.2 mm)

1.13 (28.6 mm)

2.39

(60

.7m

m)

3.28

(83

.3 m

m)

3.65

(92

.6 m

m)

0.75 (19.1 mm)

1.70 (43.3 mm)

2.38

(60

.3 m

m)

Ø 1

.56

(39

.7 m

m)

2.47 (63.0 mm)

Ø 1

.84

(47.

0 m

m)

Ø 2

.08

(53.

0 m

m)

LOCKING PLUGCat. No. 2341

SPECIFICATIONS & FEATURES• V-0-MAX™ Locking Receptacles carry a UL

94 V-0 Flammability Rating, the best rating ofany material used in Industrial Locking FlushReceptacle available today

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed Spec. Listed WC-596 (File #E-13399— Cat. Nos. 2320, 2326, 2330, 2336, 3720,3756, 2335, 2340, 2346; File #E-13393 —Cat. Nos. 2321, 2323, 2325, 2331, 2333,2335, 3721, 3723, 3755, 2341,2343, 2345)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

20 AMP Locking Devices20 AMP 250V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle 2320†

V-0-MAX™ Single Flush Receptacle, 2320-IG†

Isolated GroundLocking Plug, Black Nylon Body 2321 .385–.780 10–18Locking Plug, Yellow Nylon Body 2321-CY .385–.780 10–18Locking Connector, Black Nylon Body 2323 .385–.780 10–18Locking Connector, Yellow Nylon Body 2323-CY .385–.780 10–18Locking Flanged Inlet 2325Locking Flanged Outlet 2326

20 AMP 277V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle 2330†

V-0-MAX™ Single Flush Receptacle, 2330-IG†

Isolated GroundLocking Plug, Black Nylon Body 2331 .385–.780 10–18Lighted Locking Plug, Black Nylon Body 2331-PLC .385–.780 10–18(check for availability)Locking Connector, Black Nylon Body 2333 .385–.780 10–18Lighted Locking Connector, 2333-PLC .385–.780 10–18Black Nylon Body (check for availability)Locking Flanged Inlet 2335Locking Flanged Outlet 2336

20 AMP 347V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle* 3720†

Locking Plug, Black Nylon Body* 3721 .385–.780 10–18Locking Connector, Black 3723 .385–.780 10–18Nylon Body*Locking Flanged Inlet* 3755Locking Flanged Outlet* 3756

20 AMP 480V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 2340†

Single Flush Receptacle, 2340-IG†

Isolated GroundLocking Plug, Black Nylon Body 2341 .385–.780 10–18Locking Connector, Black Nylon Body 2343 .385–.780 10–18Locking Flanged Inlet 2345Locking Flanged Outlet 2346†Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section G.For Corrosion Resistant Locking Devices, please check pages K2–K5Weather-Resistant Boots for 20A Locking Plugs and Connectors are listed on page J20

Locking DevicesLocking Devices

L24-20P

L24-20R

L8-20P G

X

Y

L8-20R G

X

Y

Ø 2.50 ± 0.01(63.5 mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.13 ± 0.01(54.0 mm ± 0.3)

120° 120°

L6-20P

G

X

Y

L6-20R

G

X

Y

L7-20P G

W

L7-20R G

W

PANEL OPENING FOR ALL 20A / 30A3 WIRE INLETS &OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 7: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J 6For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

2371

2376

Locking DevicesLocking Devices

20 AMP Locking Devices20 AMP 600V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 2350†

Single Flush Receptacle, 2350-IG†

Isolated GroundLocking Plug, Black Nylon Body 2351 .385–.780 10–18

Locking Connector, Black Nylon Body 2353 .385–.780 10–18

Locking Flanged Inlet 2355

Locking Flanged Outlet 2356

20 AMP 125/250V 3-Pole 3-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2360†

Locking Plug, Black Nylon Body★ 2361 .385–.780 10–18

Locking Connector, Black Nylon Body★ 2363 .385–.780 10–18

Locking Flanged Inlet★ 2365

Locking Flanged Outlet★ 2366

20 AMP 3Ø 250V 3-Pole 3-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2370†

Locking Plug, Black Nylon Body★ 2371 .385–.780 10–18

Locking Connector, Black Nylon Body★ 2373 .385–.780 10–18

Locking Flanged Inlet★ 2375

Locking Flanged Outlet★ 2376

20 AMP 3Ø 480V 3-Pole 3-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2380†

Locking Plug, Black Nylon Body★ 2381 .385–.780 10–18

Locking Connector, Black Nylon Body★ 2383 .385–.780 10–18

Locking Flanged Inlet★ 2385

Locking Flanged Outlet★ 2386†Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section G.For Corrosion Resistant Locking Devices, please check pages K2–K5Weather-Resistant Boots for 20A Locking Plugs and Connectors are listed on page J20All devices are UL Listed. Also CSA certified except where indicated by★

L12-20PZ

X

Y

L12-20RZ

X

Y

L9-20P G

X

Y

L9-20R G

X

Y

L10-20P W

X

Y

L10-20R W

X

Y

L11-20PZ

X

Y

L11-20RZ

X

Y

SPECIFICATIONS & FEATURES• Locking Receptacles feature a complete

range of ratings and NEMA configurations,including isolated ground and non-grounding

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed Spec. Listed WC-596 (File #E-13399— Cat. Nos. 2350, 2356, 2360, 2366, 2370,2376, 2380, 2386; File #E-13393 — Cat. Nos.2351, 2353, 2355, 2361, 2363, 2365, 2371,2373, 2375, 2381, 2383, 2385)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

LOCKING FLANGED INLETCat. No. 2375

2.06 (52.4 mm)

Ø 2

.05

(52.

0 m

m)

Ø 0.20(5.2 mm)

Ø 2.87 (72.9 mm)

Ø 2.50 (63.5 mm)

120°2.11 (53.6 mm)2.29 (58.3 mm)

1.84

(46

.8 m

m)

Ø 0.20(5.2 mm)

Ø 2.87 (72.9 mm)Ø 2.50 (63.5 mm)

120°

LOCKING FLANGED OUTLETCat. No. 2376

Ø 2.50 ± 0.01(63.5 mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.13 ± 0.01(54.0 mm ± 0.3)

120° 120°

PANEL OPENING FOR ALL 20A / 30A3 WIRE INLETS &OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 8: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J 7 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

2411

2413

SPECIFICATIONS & FEATURES• V-0-MAX™ Locking Receptacles carry a UL

94 V-0 Flammability Rating, the best rating ofany material used in Industrial Locking FlushReceptacle available today

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed Spec. Listed WC-596 (File #E-13399— Cat. Nos. 2410, 2416, 2420, 2426, 2430,2436, 2440, 2446; File #E-13393 — Cat.Nos. 2411, 2413, 2415, 2421, 2423, 2425,2431, 2433, 2435, 2441, 2443, 2445)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

20 AMP Locking Devices20 AMP 125/250V 3-Pole 4-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle 2410†

V-0-MAX™ Single Flush Receptacle, 2410-IG†

Isolated GroundLocking Plug, Black Nylon Body 2411 .595–.895 10–18

Locking Connector, Black Nylon Body 2413 .595–.895 10–18

Locking Flanged Inlet 2415

Locking Flanged Outlet 2416

20 AMP 3Ø 250V 3-Pole 4-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle 2420†

V-0-MAX™ Single Flush Receptacle, 2420-IG†

Isolated GroundLocking Plug, Black Nylon Body 2421 .595–.895 10–18

Locking Connector, Black Nylon Body 2423 .595–.895 10–18

Locking Flanged Inlet 2425

Locking Flanged Outlet 2426

20 AMP 3Ø 480V 3-Pole 4-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle 2430†

V-0-MAX™ Single Flush Receptacle, 2430-IG†

Isolated GroundLocking Plug, Black Nylon Body 2431 .595–.895 10–18

Locking Connector, Black Nylon Body 2433 .595–.895 10–18

Locking Flanged Inlet 2435

Locking Flanged Outlet 2436

20 AMP 3ØY 120/208V 4-Pole 4-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2440†

Locking Plug, Black Nylon Body★ 2441 .595–.895 10–18

Locking Connector, Black Nylon Body★ 2443 .595–.895 10–18

Locking Flanged Inlet★ 2445

Locking Flanged Outlet★ 2446

†Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section G.For Corrosion Resistant Locking Devices, please check pages K2–K5Weather-Resistant Boots for 20A Locking Plugs and Connectors are listed on page J20All devices are UL Listed. Also CSA certified except where indicated by★

Locking DevicesLocking Devices

Ø 2.687 ± 0.01(68.25mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.28 (57.94mm)Ø 2.25 (57.15mm)

120° 120°

L15-20P

Z

X

Y G

L15-20R

Z

X

YG

L16-20P

Z

X

Y G

L16-20R

Z

X

YG

L18-20P

Z

X

Y W

L18-20R

Z

X

YW

L14-20P W

X

Y

G

L14-20R W

X

Y

G

LOCKING PLUGCat. No. 2411

Ø 2

.22

(56.

0 m

m)

Ø 1

.97

(50.

0 m

m)

2.70 (69.0 mm)

Ø 1

.97

(50.

0 m

m)

3.78 (96 mm)

Ø 2

.22

(56.

0 m

m)

LOCKING CONNECTORCat. No. 2413

PANEL OPENINGFOR ALL20A / 30A4 AND 5 WIRE INLETS & OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 9: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J 8For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

LOCKING CONNECTORCat. No. 2523

Ø 1

.97

(50.

0 m

m)

3.78 (96 mm)

Ø 2

.22

(56.

0 m

m)

Ø 2.687 ± 0.01(68.25mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.28 (57.94mm)Ø 2.25 (57.15mm)

120° 120°

20 AMP Locking Devices20 AMP 3ØY 277/480V 4-Pole 4-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2450†

Locking Plug, Black Nylon Body★ 2451 .595–.895 10–18

Locking Connector, Black Nylon Body★ 2453 .595–.895 10–18

Locking Flanged Inlet★ 2455

Locking Flanged Outlet★ 2456

20 AMP 3ØY 347/600V 4-Pole 4-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2460†

Locking Plug, Black Nylon Body★ 2461 .595–.895 10–18

Locking Connector, Black Nylon Body★ 2463 .595–.895 10–18

Locking Flanged Inlet★ 2465

Locking Flanged Outlet★ 2466

20 AMP 3ØY 120/208V 4-Pole 5-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 2510†

Single Flush Receptacle, 2510-IG†

Isolated GroundLocking Plug, Black Nylon Body 2511 .595–.895 10–18

Locking Connector, Black Nylon Body 2513 .595–.895 10–18

Locking Flanged Inlet 2515

Locking Flanged Outlet 2516

20 AMP 3ØY 277/480V 4-Pole 5-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 2520†

Single Flush Receptacle, 2520-IG†

Isolated GroundLocking Plug, Black Nylon Body 2521 .595–.895 10–18

Locking Connector, Black Nylon Body 2523 .595–.895 10–18

Locking Flanged Inlet 2525

Locking Flanged Outlet 2526

†Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section G.For Corrosion Resistant Locking Devices, please check pages K2–K5Weather-Resistant Boots for 20A Locking Plugs and Connectors are listed on page J20All devices are UL Listed. Also CSA certified except where indicated by★

L19-20P

Z

X

Y W

L19-20R

Z

X

YW

L20-20P

Z

X

Y W

L20-20R

Z

X

YW

L21-20P

Z

X

YWG

L21-20R

Z

X

YW G

L22-20P

Z

X

Y WG

L22-20R

Z

X

YWG

2523

2525

SPECIFICATIONS & FEATURES• Locking Receptacles feature a complete

range of ratings and NEMA configurations,including isolated ground and non-grounding

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed. Spec. Listed WC-596 (File #13399 –Cat. Nos. 2450, 2456, 2460, 2466, 2510,2516, 2520, 2526; File #13393 – Cat. Nos.2451, 2453, 2455, 2461, 2463, 2465, 2511,2513, 2515, 2521, 2523, 2525)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

Locking DevicesLocking Devices

PANEL OPENINGFOR ALL20A / 30A4 AND 5 WIRE INLETS & OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 10: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J 9 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

SINGLE LOCKING RECEPTACLE—Cat. No. 2610

1.31 (33.2 mm)

1.06 (26.8 mm)

2.67

(67.

8 m

m)

3.63

(92.

1 m

m)

0.75 (19.1 mm)

1.69 (42.8 mm)

2.38

(60.

3 m

m)

Ø 1

.56

(39.

7 m

m)

3.28

(83.

3 m

m)

2.06 (52.4 mm)

Ø 2

.05

(52.

0 m

m)

Ø 0.20(5.2 mm)

Ø 2.87 (72.9 mm)Ø 2.50 (63.5 mm)

120°

LOCKING FLANGED INLET—Cat. No. 2615

SPECIFICATIONS & FEATURES• V-0-MAX™ Locking Receptacles carry a UL

94 V-0 Flammability Rating, the best rating ofany material used in Industrial Locking FlushReceptacle available today

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed Spec. Listed WC-596 (File #E-13399— Cat. Nos. 2530, 2546, 2610, 2616, 2620,2626F; File #E-13393 — Cat. Nos. 2531,2533, 2545, 2611, 2613, 2615, 2621, 2623,2625F)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

20 AMP Locking Devices20 AMP 3ØY 347/600V 4-Pole 5-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 2530†

Single Flush Receptacle, 2530-IG†

Isolated GroundLocking Plug, Black Nylon Body 2531 .595–.895 10–18Locking Connector, Black Nylon Body 2533 .595–.895 10–18Locking Flanged Inlet 2545Locking Flanged Outlet 2546

30 AMP Locking Devices30 AMP 125V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle 2610†

V-0-MAX™ Single Flush Receptaclee, 2610-IG†

Isolated GroundLocking Plug, Black Nylon Body 2611 .385–.860 10–18Lighted Locking Plug, Black Nylon Body 2611-PLC .385–.860 10–18Locking Plug, All Black for Stage and Studio 2611-B .385–.860 10–18Lighted Locking Plug, 2611-PLB .385–.860 10–18All-Black Nylon BodyLocking Plug, Yellow Nylon Body 2611-CY .385–.860 10–18Locking Connector, Black Nylon Body 2613 .385–.860 10–18Lighted Locking Connector, 2613-PLC .385–.860 10–18Black Nylon BodyLocking Connector, All Black for 2613-B .385–.860 10–18Stage and StudioLighted Locking Connector, 2613-PLB .385–.860 10–18All-Black Nylon BodyLocking Connector, Yellow Nylon Body 2613-CY .385–.860 10–18Locking Flanged Inlet 2615Locking Flanged Outlet 2616

30 AMP 250V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle 2620†

V-0-MAX™ Single Flush Receptacle, 2620-IG†

Isolated GroundLocking Plug, Black Nylon Body 2621 .385–.860 10–18Locking Plug, All Black for 2621-B .385–.860 10–18Stage and StudioLocking Plug, Yellow Nylon Body 2621-CY .385–.860 10–18Locking Connector, Black Nylon Body C2623 .385–.860 10–18Locking Connector, All Black for C2623-B .385–.860 10–18Stage and StudioLocking Connector, Yellow Nylon Body C2623-CY .385–.860 10–18Locking Flanged Inlet 2625FLocking Flanged Outlet 2626F†Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section G.For Corrosion Resistant Locking Devices, please check pages K2–K5Weather-Resistant Boots for 30A Locking Plugs and Connectors are listed on page J20All devices are UL Listed and CSA certified.

L5-30P

W

G

L5-30R

W

G

L6-30P

G

X

Y

L6-30R

G

X

Y

Ø 2.50 ± 0.01(63.5 mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.13 ± 0.01(54.0 mm ± 0.3)

120° 120°

Locking DevicesLocking Devices

L23-20P

Z

X

Y WG

L23-20R

Z

X

YWG

2610

2611

PANEL OPENING FOR ALL 20A / 30A3 WIRE INLETS &OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 11: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J 10For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

LOCKING PLUGCat. No. 2661

2.48 (62.9 mm)

Ø 1

.84

(46.

8 m

m)

Ø 2.08 (52.8 mm)

Ø 1

.84

(46.

8 m

m)

3.53 (89.7 mm)2.08 (52.8 mm)

LOCKING CONNECTORCat. No. 2663

SPECIFICATIONS & FEATURES• Locking Receptacles feature a complete

range of ratings and NEMA configurations,including isolated ground and non-grounding

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed. Spec. Listed WC-596 (File #E-13399 – Cat. Nos., 2630, 2636, 2640, 2646,2650, 2656, 2660, 2666; File #E-13393 –Cat. Nos. 2631, 2633, 2635, 2641, 2643,2645 C2651, C2653, 2655, 2661, 2663,2665)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

30 AMP Locking Devices30 AMP 277V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 2630†

Single Flush Receptacle, 2630-IG†

Isolated GroundLocking Plug, Black Nylon Body 2631 .385–.860 10–18

Lighted Locking Plug, Black Nylon Body 2631-PLC .385–.780 10–18(check for availability)Locking Connector, Black Nylon Body 2633 .385–.860 10–18

Lighted Locking Connector, 2633-PLC .385–.780 10–18Black Nylon Body (check for availability)Locking Flanged Inlet 2635

Locking Flanged Outlet 2636

30 AMP 480V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 2640†

Single Flush Receptacle, 2640-IG†

Isolated GroundLocking Plug, Black Nylon Body 2641 .385–.860 10–18

Locking Connector, Black Nylon Body 2643 .385–.860 10–18

Locking Flanged Inlet 2645

Locking Flanged Outlet 2646

30 AMP 600V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 2650†

Single Flush Receptacle, 2650-IG†

Isolated GroundLocking Plug, Black Nylon Body C2651 .385–.860 10–18

Locking Connector, Black Nylon Body C2653 .385–.860 10–18

Locking Flanged Inlet 2655

Locking Flanged Outlet 2656

30 AMP 125/250V 3-Pole 3-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2660-A†

Locking Plug, Black Nylon Body★ 2661 .385–.860 10–18

Locking Connector, Black Nylon Body★ 2663 .385–.860 10–18

Locking Flanged Inlet★ 2665

Locking Flanged Outlet★ 2666

†Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section G.For Corrosion Resistant Locking Devices, please check pages K2–K5Weather-Resistant Boots for 30A Locking Plugs and Connectors are listed on page J20All devices are UL Listed. Also CSA certified except where indicated by★

L9-30P G

X

Y

L9-30R G

X

Y

L10-30P W

X

Y

L10-30R W

X

Y

Ø 2.50 ± 0.01(63.5 mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.13 ± 0.01(54.0 mm ± 0.3)

120° 120°

L7-30PG

W

L7-30R G

W

L8-30PG

X

Y

L8-30R G

X

Y

2661

2663

Locking DevicesLocking Devices

PANEL OPENING FOR ALL 20A / 30A3 WIRE INLETS &OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 12: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J 11 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

SINGLE RECEPTACLECat. No. 2710

1.31 (33.2 mm)

1.06 (26.8 mm)

2.67

(67

.8 m

m)

3.63

(92

.1 m

m)

0.75 (19.1 mm)

1.69 (42.8 mm)

2.38

(60

.3 m

m)

Ø 1

.56

(39

.7 m

m)

3.28

(83

.3 m

m)

2.37 (60.3 mm)

Ø 2

.22

(56.

3 m

m)

Ø 0.20 (5.2 mm)

Ø 3.03 (77.0 mm)

Ø 2.69 (68.2 mm)

120°

LOCKING FLANGED OUTLETCat. No. 2716

SPECIFICATIONS & FEATURES• V-0-MAX™ Locking Receptacles carry a UL

94 V-0 Flammability Rating, the best rating ofany material used in Industrial Locking FlushReceptacle available today

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed. Spec. Listed WC-596 (File #13399 –Cat. Nos. 2670, 2676, 2680, 2686, 2690,2696 2710, 2716; File #E-13393 – Cat. Nos.,2671, 2673, 2675, 2681, 2683, 2685, 2691,2693, 2695, 2711, 2713, 2715)

• CSA Certified (File #LR-406)• NOM Certified (File #057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

30 AMP Locking Devices30 AMP 3Ø 250V 3-Pole 3-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2670†

Locking Plug, Black Nylon Body★ 2671 .385–.860 10–18

Locking Connector, Black Nylon Body★ 2673 .385–.860 10–18

Locking Flanged Inlet★ 2675

Locking Flanged Outlet★ 2676

30 AMP 3Ø 480V 3-Pole 3-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2680†

Locking Plug, Black Nylon Body★ 2681 .385–.860 10–18

Locking Connector, Black Nylon Body★ 2683 .385–.860 10–18

Locking Flanged Inlet★ 2685

Locking Flanged Outlet★ 2686

30 AMP 3Ø 600V 3-Pole 3-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2690†

Locking Plug, Black Nylon Body★ 2691 .385–.860 10–18

Locking Connector, Black Nylon Body★ 2693 .385–.860 10–18

Locking Flanged Inlet★ 2695

Locking Flanged Outlet★ 2696

30 AMP 125/250V 3-Pole 4-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle 2710†

V-0-MAX™ Single Flush Receptacle, 2710-IG†

Isolated GroundLocking Plug, Black Nylon Body 2711 .595–1.150 10–18Locking Plug, Yellow Nylon Body 2711-CY .595–1.150 10–18Locking Connector, Black Nylon Body 2713 .595–1.150 10–18Locking Connector, Yellow Nylon Body 2713-CY .595–1.150 10–18Locking Flanged Inlet 2715Locking Flanged Outlet 2716†Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section G.For Corrosion Resistant Locking Devices, please check pages K2–K5Weather-Resistant Boots for 30A Locking Plugs and Connectors are listed on page J20All devices are UL Listed. Also CSA certified except where indicated by★

L14-30P W

X

Y

G

L14-30R W

X

Y

G

Ø 2.687 ± 0.01(68.25mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.28 (57.94mm)Ø 2.25 (57.15mm)

120° 120°

L11-30PZ

X

Y

L11-30RZ

X

Y

L12-30PZ

X

Y

L12-30R

Z

X

Y

L13-30PZ

X

Y

L13-30RZ

X

Y

Locking DevicesLocking Devices

2710

2716

PANEL OPENINGFOR ALL20A / 30A4 AND 5 WIRE INLETS & OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 13: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J 12For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

SPECIFICATIONS & FEATURES• V-0-MAX™ Locking Receptacles carry a UL

94 V-0 Flammability Rating, the best rating ofany material used in Industrial Locking FlushReceptacle available today

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed. Spec. Listed WC-596 (File #E-13399 – Cat. Nos., 2720, 2726, 2730, 2736,2740, 2746, 2750, 2756; File # E-13393 –Cat. Nos., 2721, 2723, 2725, 2731, 2733,2735, 2741, 2743, 2745, 2751, 2753, 2755)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

30 AMP Locking Devices30 AMP 3Ø 250V 3-Pole 4-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle 2720†

V-0-MAX™ Single Flush Receptacle, 2720-IG†

Isolated GroundLocking Plug, Black Nylon Body 2721 .595–1.150 10–18Locking Connector, Black Nylon Body 2723 .595–1.150 10–18Locking Flanged Inlet 2725Locking Flanged Outlet 2726

30 AMP 3Ø 480V 3-Pole 4-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.V-0-MAX™ Single Flush Receptacle 2730†

V-0-MAX™ Single Flush Receptacle, 2730-IG†

Isolated GroundLocking Plug, Black Nylon Body 2731 .595–1.150 10–18Locking Connector, Black Nylon Body 2733 .595–1.150 10–18Locking Flanged Inlet 2735Locking Flanged Outlet★ 2736

30 AMP 3Ø 600V 3-Pole 4-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2740†

Single Flush Receptacle, 2740-IG†

Isolated Ground★

Locking Plug, Black Nylon Body 2741 .595–1.150 10–18Locking Connector, Black Nylon Body 2743 .595–1.150 10–18Locking Flanged Inlet 2745Locking Flanged Outlet 2746

30 AMP 3ØY 120/208V 4-Pole 4-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2750†

Locking Plug, Black Nylon Body★ 2751 .595–1.150 10–18Locking Connector, Black Nylon Body★ 2753 .595–1.150 10–18Locking Flanged Inlet★ 2755Locking Flanged Outlet★ 2756

†Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section GFor Corrosion Resistant Locking Devices, please check pages K2–K5Weather-Resistant Boots for 30A Locking Plugs and Connectors are listed on page J20All devices are UL Listed. Also CSA certified except where indicated by★

Ø 2.687 ± 0.01(68.25mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.28 (57.94mm)Ø 2.25 (57.15mm)

120° 120°LOCKING PLUG

Cat. No. 2731

Ø 1

.97

(50.

0 m

m)

Ø 2

.22

(56.

4 m

m)

2.70 (68.7 mm)

Ø 2

.22

(56.

4 m

m)

Ø 1

.97

(50.

0 m

m)

3.78 (96.0 mm)

LOCKING CONNECTORCat. No. 2733

2730

2731

Locking DevicesLocking Devices

L15-30P

Z

X

Y G

L15-30R

Z

X

YG

L16-30P

Z

X

Y G

L16-30R

Z

X

YG

L17-30P

Z

X

Y G

L17-30R

Z

X

YG

L18-30P

Z

X

Y W

L18-30R

Z

X

YW

PANEL OPENINGFOR ALL20A / 30A4 AND 5 WIRE INLETS & OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 14: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J13 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

Locking DevicesLocking Devices

SPECIFICATIONS & FEATURES• Locking Receptacles feature a complete

range of ratings and NEMA configurations,including isolated ground and non-grounding

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed Spec. Listed WC-596 (File #E-13399— Cat. Nos. 2760, 2766, 2770, 2776, 2810,2816, 2820, 2826, 2830, 2836; File #E-13393 — Cat. Nos. 2761, 2763, 2765,2771, 2773, 2775, 2811, 2813, 2815, 2821,2823, 2825, 2831, 2833, 2835)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

30 AMP Locking Devices30 AMP 3ØY 277/480V 4-Pole 4-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2760†

Locking Plug, Black Nylon Body★ 2761 .595–1.150 10–18

Locking Connector, Black Nylon Body★ 2763 .595–1.150 10–18

Locking Flanged Inlet★ 2765

Locking Flanged Outlet★ 2766

30 AMP 3ØY 347/600V 4-Pole 4-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 2770†

Locking Plug, Black Nylon Body★ 2771 .595–1.150 10–18

Locking Connector, Black Nylon Body★ 2773 .595–1.150 10–18

Locking Flanged Inlet★ 2775

Locking Flanged Outlet★ 2776

30 AMP 3ØY 120/208V 4-Pole 5-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 2810†

Single Flush Receptacle, Isolated Ground 2810-IG†

Locking Plug, Black Nylon Body 2811 .595–1.150 10–18

Locking Connector, Black Nylon Body 2813 .595–1.150 10–18

Locking Flanged Inlet 2815

Locking Flanged Outlet 2816

30 AMP 3ØY 277/480V 4-Pole 5-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 2820†

Single Flush Receptacle, Isolated Ground 2820-IG†

Locking Plug, Black Nylon Body 2821 .595–1.150 10–18

Locking Connector, Black Nylon Body 2823 .595–1.150 10–18

Locking Flanged Inlet 2825

Locking Flanged Outlet 2826

30 AMP 3ØY 347/600V 4-Pole 5-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 2830†

Single Flush Receptacle, Isolated Ground 2830-IG

Locking Plug, Black Nylon Body 2831 .595–1.150 10–18

Locking Connector, Black Nylon Body 2833 .595–1.150 10–18

Locking Flanged Inlet 2835

Locking Flanged Outlet 2836†Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section G.For Corrosion Resistant Locking Devices, please check pages K2–K5Weather-Resistant Boots for 30A Locking Plugs and Connectors are listed on page J20All devices are UL Listed. Also CSA certified except where indicated by★

L19-30P

Z

X

YW

L19-30RZ

X

YW

L20-30PZ

X

Y W

L20-30RZ

X

YW

L21-30PZ

X

YWG

L21-30RZ

X

YWG

L22-30P

Z

X

Y WG

L22-30RZ

X

YWG

L23-30P

Z

X

Y WG

L23-30RZ

X

YWG

2761

2763

LOCKING PLUG Cat. No. 2761

Ø 2.22 (56.4 mm)

Ø 1

.97

(50.

0 m

m)

2.70 (68.7 mm)

Ø 1

.97

(50.

0 m

m)

3.78 (96 mm)Ø 2.22 (56.4 mm)

LOCKING CONNECTOR Cat. No. 2763

Ø 2.687 ± 0.01(68.25mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.28 (57.94mm)Ø 2.25 (57.15mm)

120° 120°

PANEL OPENINGFOR ALL20A / 30A4 AND 5 WIRE INLETS & OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 15: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

WETGUARD™ 15A LOCKING CONNECTOR

4.20 (106.7 mm)

1.28

(3

2.5

mm

)dia

.

2.30

(58

.3 m

m)

J14For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

24W47

25W47

Wetguard™ Devices Engineered to IP66 & IP67 Watertight Standards

Wetguard™ Locking Plugs and ConnectorsDESCRIPTION CAT. NO. PLUG CAT. NO. CONNECTOR

High-Visibility Yellow, 15A-125V 2-Pole, 3-Wire 24W47 25W47

High-Visibility Yellow, 15A-250V 2-Pole, 3-Wire 24W49 25W49

High-Visibility Yellow, 15A-277V 2-Pole, 3-Wire 24W34 25W34

High-Visibility Yellow, 20A-125V 2-Pole, 3-Wire 26W47 27W47

Black, 20A-125V 2-Pole, 3-Wire 26W47-B 27W47-B

High-Visibility Yellow, 20A-250V 2-Pole, 3-Wire 26W48 27W48

High-Visibility Yellow, 20A-277V 2-Pole, 3-Wire 26W49 27W49

Locking Cord Sets 15 AMP 125V 2-Pole 3-Wire GroundingDESCRIPTION LENGTH CAT. NO. CAT. NO. NEMA

14/3 SOOW 12/3 SOOW CONFIG.Yellow Cord, Yellow Devices★ 25' WL515-43A WL515-23A

Yellow Cord, Yellow Devices★ 50' WL515-43B WL515-23B

Yellow Cord, Yellow Devices★ 100' WL515-43C WL515-23C

Repacement Closure CapDESCRIPTION CAT. NO.

Replacement Connector Closure Cap for 15A devices 50W50

Replacement Connector Closure Cap for 20A devices 50W52 All devices are UL Listed. Also CSA certified except where indicated by★

SPECIFICATIONS & FEATURESWetguard• IEC IP66 and IP 67 Rated, in accor-

dance with IEC 529 as evaluated byUL and CSA

• NEMA Type 4, 4X, 6 and 6P Ratings inaccordance with UL 50 and CSA 94

• Outstanding resistance to wet anddamp environments, extreme tempera-ture variations, acids, alkalis, grease,oils and solvents

• Effective “tongue and groove” construc-tion seals out water, moisture, dirtwhen plugs are mated with connectors

• Innovative strain-relief grips cablessecurely, keeps out water and moisture

• Cord clamp range for 15A devices:18/3–10/3 SO (.375"–.655"). For 20Adevices: 18/3–10/5 SO, ST, SJ(.375"–.870")

• Non-magnetic stainless steel fast-threading assembly screws won’t interfere with sensitive equipment

• Connector “hood” closure cap sealsdevice when not in use

TESTING & CODE COMPLIANCE• Meet NEMA WD 1 & 6, ANSI

requirements• UL Listed & meets Fed. Spec. require-

ments: (File #13393)• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability, Rated V2Operating Temperature: -40°C to 60°C

WETGUARD™ 15A LOCKING PLUG

Ø1.

50 (3

8.1

mm

)

Ø1.

28 (3

2.5

mm

)

2.71 (68.8 mm)

WETGUARD™ 20A LOCKING PLUG

3.58 (91.0 mm)

2.31

(58

.7 m

m)

WETGUARD™ 20A LOCKING CONNECTOR

5.52 (140.2 mm)

2.50

(63

.3 m

m)

Wetguard™

Locking DevicesWetguard™

Locking Devices

L5-15P

W

G

L5-15R

W

G

L6-15P

G

X

Y

L7-15PG

W

L5-20PW

G

L5-20PW

G

L6-20P

G

X

Y

L7-20PG

W

L6-15R G

X

Y

L7-15RG

W

L5-20R

W

G

L5-20R

W

G

L6-20R

G

X

Y

L7-20RG

W

L5-15P

W

G

L5-15R

W

G

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 16: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J15 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

26W74

27W74

Wetguard™

Locking DevicesWetguard™

Locking Devices

Wetguard™ Devices Engineered to IP66 & IP67 Watertight Standards

Wetguard™ Locking Plugs and ConnectorsDESCRIPTION CAT. NO. PLUG CAT. NO. CONNECTOR

High-Visibility Yellow, 20A-125/250V 3-Pole, 4-Wire 26W74 27W74

High-Visibility Yellow, 20A-3Ø 250V 3-Pole, 4-Wire 26W75 27W75

High-Visibility Yellow, 20A-3Ø 480V 3-Pole, 4-Wire 26W76 27W76

High-Visibility Yellow, 20A-3ØY 120/208V 4-Pole, 5-Wire 26W81 27W81

Black, 20A-3ØY 120/208V 4-Pole, 5-Wire 26W81-B 27W81-B

High-Visibility Yellow, 20A-3ØY 277/480V 4-Pole, 5-Wire 26W82 27W82

High-Visibility Yellow, 20A-3ØY 347/600V 4-Pole, 5-Wire 26W83 27W83

Wetguard™ Non-NEMA, Non-Grounding Devices (For Replacement Use Only)

DESCRIPTION CAT. NO. PLUG CAT. NO. CONNECTOR

High-Visibility Yellow, 20A-125/250V 3-Pole, 3-Wire★ 26W08 27W08

High-Visibility Yellow, 20A-3ØY 120/208V 4-Pole, 4-Wire★ 26W09 27W09

Repacement Closure CapDESCRIPTION CAT. NO.

Replacement Connector Closure Cap for 20A devices 50W52 All locking devices are UL Listed. Also CSA certified except where indicated by★

L15-20P

Z

X

Y G

L16-20P

Z

X

Y G

L14-20P W

X

Y

G L14-20R W

X

Y

G

L21-20P

Z

X

YWG

L21-20P

Z

X

YWG

L22-20P

Z

X

Y WG

L15-20R

Z

X

YG

L16-20R

Z

X

YG

L21-20R

Z

X

YW G

L21-20R

Z

X

YW G

L22-20R

Z

X

YWG

L23-20P

Z

X

Y WG

L23-20R

Z

X

YWG

NON-NEMA

NON-NEMA

NON-NEMA

NON-NEMA

WETGUARD™ 20A LOCKING PLUG

3.58 (91.0 mm)

2.31

(58

.7 m

m)

WETGUARD™ 20A LOCKING CONNECTOR

5.52 (140.2 mm)

2.50

(63

.3 m

m)

SPECIFICATIONS & FEATURESWetguard• IEC IP66 and IP 67 Rated, in accor-

dance with IEC 529 as evaluated byUL and CSA

• NEMA Type 4, 4X, 6 and 6P Ratings inaccordance with UL 50 and CSA 94

• Outstanding resistance to wet anddamp environments, extreme tempera-ture variations, acids, alkalis, grease,oils and solvents

• Effective “tongue and groove” construc-tion seals out water, moisture, dirtwhen plugs are mated with connectors

• Innovative strain-relief grips cablessecurely, keeps out water and moisture

• Cord clamp range for 20A devices:18/3–10/5 SO, ST, SJ (.375"–.870")

• Non-magnetic stainless steel fast-threading assembly screws won’t interfere with sensitive equipment

• Connector “hood” closure cap sealsdevice when not in use

TESTING & CODE COMPLIANCE• Meet NEMA WD 1 & 6, ANSI

requirements• UL Listed & meets Fed. Spec. require-

ments: (File #13393)• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability, Rated V2Operating Temperature: -40°C to 60°C

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 17: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J16For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

Wetguard™ Devices Engineered to IP66 & IP67 Watertight Standards

Wetguard™ Locking Plugs and ConnectorsDESCRIPTION CAT. NO. PLUG CAT. NO. CONNECTOR

High-Visibility Yellow, 30A-125V 2-Pole, 3-Wire 28W47 29W47

Black, 30A-125V 2-Pole, 3-Wire 28W47-B 29W47-B

High-Visibility Yellow, 30A-250V 2-Pole, 3-Wire 28W48 29W48

High-Visibility Yellow, 30A-277V 2-Pole, 3-Wire 28W49 29W49

High-Visibility Yellow, 30A-125/250V 3-Pole, 4-Wire 28W74 29W74

High-Visibility Yellow, 30A-3Ø 250V 3-Pole, 4-Wire 28W75 29W75

High-Visibility Yellow, 30A-3Ø 480V 3-Pole, 4-Wire 28W76 29W76

High-Visibility Yellow, 30A-3Ø 600V 3-Pole, 4-Wire 28W77 29W77

High-Visibility Yellow, 30A-3ØY 120/208V 4-Pole, 5-Wire 28W81 29W81

High-Visibility Yellow, 30A-3ØY 277/480V 4-Pole, 5-Wire 28W82 29W82

High-Visibility Yellow, 30A-3ØY 347/600V 4-Pole, 5-Wire 28W83 29W83

Wetguard™ Non-NEMA, Non-Grounding Devices (For Replacement Use Only)

DESCRIPTION CAT. NO. PLUG CAT. NO. CONNECTOR

High-Visibility Yellow, 30A-125/250V 3-Pole, 3-Wire★ 28W08 29W08

High-Visibility Yellow, 30A-3ØY 120/208V 4-Pole, 4-Wire★ 28W09 29W09

Replacement Closure CapDESCRIPTION CAT. NO.

Replacement Connector Closure Cap for 30A devices 50W54All locking devices are UL Listed. Also CSA certified except where indicated by★

NON-NEMA

WETGUARD™ 30A LOCKING PLUG

3.62 (92.0 mm)

2.53

(64

.3 m

m)

WETGUARD™ 30A LOCKING CONNECTOR

5.52 (140.2 mm)

2.75

(69

.9 m

m)

28W74

29W74

SPECIFICATIONS & FEATURESWetguard• IEC IP66 and IP 67 Rated, in accor-

dance with IEC 529 as evaluated byUL and CSA

• NEMA Type 4, 4X, 6 and 6P Ratings inaccordance with UL 50 and CSA 94

• Outstanding resistance to wet anddamp environments, extreme tempera-ture variations, acids, alkalis, grease,oils and solvents

• Effective “tongue and groove” construc-tion seals out water, moisture, dirtwhen plugs are mated with connectors

• Innovative strain-relief grips cablessecurely, keeps out water and moisture

• Cord clamp range for 30A devices:12/3–8/5 SO, ST, SJ (.625"–1.125")

• Non-magnetic stainless steel fast-threading assembly screws won’t interfere with sensitive equipment

• Connector “hood” closure cap sealsdevice when not in use

TESTING & CODE COMPLIANCE• Meet NEMA WD 1 & 6, ANSI

requirements• UL Listed & meets Fed. Spec. require-

ments: (File #13393)• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability, Rated V2Operating Temperature: -40°C to 60°C

Wetguard™

Locking DevicesWetguard™

Locking Devices

L5-30P

W

G L5-30R

W

G

L5-30P

W

G L5-30R

W

G

L6-30P

G

X

Y

L6-30R

G

X

Y

L7-30PG

W

L7-30R G

W

L14-30P W

X

Y

G L14-30R W

X

Y

G

L15-30P

Z

X

Y G L15-30R

Z

X

YG

L16-30P

Z

X

Y G L16-30R

Z

X

YG

L17-30P

Z

X

Y G L17-30R

Z

X

YG

L21-30PZ

X

YWG L21-30R

Z

X

YWG

L22-30P

Z

X

Y WG L22-30R

Z

X

YWG

L23-30P

Z

X

Y WG L23-30R

Z

X

YWG

NON-NEMA

NON-NEMA NON-NEMA

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 18: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J17 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

Non-NEMA Locking DevicesNon-NEMA Locking Devices

7410-B

7411-C

SINGLE RECEPTACLECat. No. 7410-B

1.43 (36.2 mm)

1.13 (28.6 mm)

2.39

(60.

7 m

m)

3.28

(83.

3 m

m)

3.62

(92.

1 m

m)

0.75 (19.0 mm)

1.70 (43.3 mm)

2.38

(60.

3 m

m)

Ø 1

.56

(39.

7 m

m)

Ø 1

.95

(50.

0 m

m)

2.70 (69.0 mm)

Ø 2

.22

(56.

0 m

m)

LOCKING PLUGCat. No. 7411-C

15 AMP Non-NEMA Locking Devices15 AMP 125V/10A-250 3-Pole 3-Wire Non-Grounding Non-NEMA†

DESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA (inches) (stranded) CONFIG.

Single Flush Receptacle★ 7582**

Locking Plug★ 7567-C* .245–.700 10–18

Locking Connector†★ 7565-C* .245–.700 10–18

Locking Flanged Inlet★ 7556

Locking Flanged Outlet★ 7557†These devices are no longer UL Listed and are for replacement use only. Add (-G) for grounding version.*Grounding (-G) version not available. For grounding connector, use Cat. No. 7555-G**Uses stainless steel wallplate, Cat. No. 84004-40.

20 AMP Non-NEMA Locking Devices20 AMP 250V AC/DC / 10 AMP 600V AC 4-Pole 5-Wire Grounding Non-NEMADESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle★ 3520∆

Locking Plug, Black Nylon Body★ 3521-C .595–.895 10–18

Locking Connector, Black 3523-C .595–.895 10–18Nylon Body★

Locking Flanged Inlet★ 3524-C

Locking Flanged Outlet★ 3525-C

20 AMP, 125V/250V 3-Pole 3-Wire Non-Grounding Non-NEMA††

DESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA (inches) (stranded) CONFIG.

Single Flush Receptacle★ 7310-B∆

Locking Plug★ 9965-C .385–.780 10–18

Locking Connector★ 7314-C .385–.780 10–18

Locking Flanged Inlet★ 3325-C

Locking Flanged Outlet★ 3326-C

20 AMP 3ØY 120V/208V 4-Pole 4-Wire Non-Grounding Non-NEMA††

DESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA (inches) (stranded) CONFIG.

Single Flush Receptacle★ 7410-B∆

Locking Plug★ 7411-C .595–.895 10–18

Locking Connector★ 7413-C .595–.895 10–18

Locking Flanged Inlet★ 7408-C

Locking Flanged Outlet★ 7409-C††Effective July 1, 1981, rating for non-grounding versions was changed from 20A-250V AC/DC, 10A-600V AC to complywith UL requirements. Add (-G) for grounding devices: (-G) devices are rated 20A-250V AC/DC, 10A-600V AC and areno longer UL Listed — for replacement use only.For Corrosion Resistant Locking Devices, please check pages K2–K5∆Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section G.Weather-Resistant Boots for 15A & 20A Locking Plugs and Connectors are listed on page J20All devices are UL Listed. Also CSA certified except where indicated by★

NON-NEMA

NON-NEMA

NON-NEMA

NON-NEMA

NON-NEMA

NON-NEMA

NON-NEMA

NON-NEMA

SPECIFICATIONS & FEATURES• Locking Receptacles feature a complete

range of ratings and Non-NEMA configura-tions, non-grounding

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed Spec. Listed WC-596 (File #E-13399— Cat. Nos. 7582, 7557, 3520, 2525-C,7310-B, 3326-C, 7410-B, 7409-C; File #E-13393 — Cat. Nos. 7567-C, 7565-C,7556, 3521-C, 3523-C, 3524-C, 9965-C,7314-C, 3325-C, 7411-C, 7413-C, 7408-C)

• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

Ø 2.687 ± 0.01(68.25mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.28 (57.94mm)Ø 2.25 (57.15mm)

120° 120°

PANEL OPENINGFOR ALL20A / 30A4 AND 5 WIRE INLETS & OUTLETS

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 19: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J18For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

LOCKING CONNECTORCat. No. 3333-C

Ø 1

.83

(46.

0 m

m)

3.53 (90.0 mm)

2.08

(52

.8 m

m)

Ø 1

.84

(47.

0 m

m)

2.48 (63.0 mm)

Ø 2

.08

(52.

8 m

m)

LOCKING PLUGCat. No. 3331-C

30 AMP Non-NEMA Locking Devices30 AMP 125V/250 3-Pole 3-Wire Non-Grounding Non-NEMA†

DESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA (inches) (stranded) CONFIG.

Single Flush Receptacle★ 3330**Locking Plug★ 3331-C .385–.860 10–18Locking Connector★ 3333-C .385–.860 10–18Locking Flanged Inlet★ 3334-CLocking Flanged Outlet★ 3335-C†Effective July 1, 1981, rating for non-grounding versions was changed from 30A-250V to comply with UL requirements.Add (-G) for grounding devices: (-G) devices are rated 30A-250V and are no longer UL Listed — for replacement use only.

30 AMP 3ØY 120V/208V 4-Pole 4-Wire Non-Grounding Non-NEMA††

DESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA (inches) (stranded) CONFIG.

Single Flush Receptacle★ 3430**Locking Plug★ 3431-C .595–.1.150 10–18Locking Connector★ 3433-C .595–.1.150 10–18Locking Flanged Inlet★ 3434-CLocking Flanged Outlet★ 3435-C††Effective July 1, 1981, rating for non-grounding versions was changed from 30A-250V AC/DC, 30A-600V AC to complywith UL requirements. Add (-G) for grounding devices: (-G) devices are rated 30A-250V AC/DC, 30A-600V AC and are nolonger UL Listed — for replacement use only.

50 AMP Non-NEMA Locking Devices50 AMP 250V DC/600V AC 2-Pole 3-Wire Grounding Non-NEMADESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Locking Receptacle★ 3771*Locking Plug★ 3763-C .680–.1.125 10–4Locking Connector★ 3762-C .680–.1.125 10–4Locking Flanged Inlet★ 3777

50 AMP 250V DC/600V AC 3-Pole 4-Wire Grounding Non-NEMADESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Locking Receptacle★ 7379*Locking Plug★ 7765-C .680–.1.125 10–4Locking Connector★ 7764-C .680–.1.125 10–4

50 AMP 250V DC/600V AC 3-Pole 4-Wire Grounding Non-NEMADESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Locking Receptacle★ 3769*Locking Plug★ 3765-C .680–.1.125 10–4Locking Connector★ 3764-C .680–.1.125 10–4Locking Flanged Inlet★ 3775

Receptacle CoverDESCRIPTION CAT. NO.Weather-protective die-cast aluminum receptacle cover 7770with lift lid for Cat. Nos. 3769, 3771 and 7379★

*Uses Weatherproof Cover, Cat. No. 7788-CR or 7770. For Corrosion Resistant Locking Devices, please check pages K2–K5.Weather-Resistant Boots for 30A Locking Plugs and Connectors are listed on page J20.**Uses stainless steel wallplate, Cat. No. 84020-40. For additional wallplate selections, please see Section G.All devices are UL Listed. Also CSA certified except where indicated by★

SPECIFICATIONS & FEATURES• Locking Receptacles feature a complete

range of ratings and Non-NEMA configura-tions, including isolated ground and non-grounding

• Locking Plugs and Connectors featureheavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed Spec. Listed WC-596 (File #E-13399— Cat. Nos. 3330, 3335-C, 3530, 3535-C,3771, 7379, 3769; File #E-13393 — Cat.Nos. 3331-C, 3333-C, 3334-C, 3431-C,3433-C, 3434-C, 3763-C, 3762-C, 3777,7765-C, 7764-C, 3765-C, 3764-C, 3775)

• CSA Certified (LR-406)• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

Ø 2.687 ± 0.01(68.25mm ± 0.3)

TAP FOR #8-32 UNC SCREW(3) PLACES

Ø 2.28 (57.94mm)Ø 2.25 (57.15mm)

120° 120°

PANEL OPENINGFOR ALL20A / 30A4 AND 5 WIRE INLETS & OUTLETS

NON-NEMA

NON-NEMA

WGR

G

NON-NEMA

WGR

G

X

Z

Y

GR

NON-NEMA

X

Y

GRZ

GR

YX

W

NON-NEMA GR

YX

W

Non-NEMA Locking DevicesNon-NEMA Locking Devices

3331-C

3333-C

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 20: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J19 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

CS63-70

CS63-60C

Non-NEMA Locking DevicesNon-NEMA Locking Devices

SPECIFICATIONS & FEATURES• All-nylon construction that takes punishment

and continues to perform• Patented strain relief that provides maximum

holding power• Tight-fitting gaskets to seal out dust• Easy identification of ratings• Color-Coded large wire pockets and terminal

screws• Corrosion-resistant devices feature added

plating

TESTING & CODE COMPLIANCE• Non-NEMA devices meet/exceed UL 498

standards• UL Fed Spec. Listed WC-596 (File #E-13399

— Cat. Nos. CS63-70, CS82-69, CS63-69,CS83-69, CS84-69, CS81-69; File #E-13393— Cat. Nos. CS63-61C, CS63-60C, CS63-77, CS82-65C, CS82-64C, CS82-75,CS63-65C, CS63-64C, CS63-75, CS83-65C,CS83-64C, CS83-75, CS84-65C, CS84-64C,CS84-75, CS81-65C, CS81-64C, CS81-75)

• NOM Certified (#057)• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

50 AMP “California Style” CS Non-NEMA Locking Devices50 AMP 125V 2-Pole 3-Wire Grounding Non-NEMADESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Locking Receptacle★ CS63-70*Locking Plug★ CS63-61C .680–1.125 10–4Locking Connector★ CS63-60C .680–1.125 10–4Locking Flanged Inlet★ CS63-77

50 AMP 250V 2-Pole 3-Wire Grounding Non-NEMADESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Locking Receptacle★ CS82-69*Locking Plug★ CS82-65C .680–1.125 10–4Locking Connector★ CS82-64C .680–1.125 10–4Locking Flanged Inlet★ CS82-75

50 AMP 125/250V 3-Pole 4-Wire Grounding Non-NEMADESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Locking Receptacle★ CS63-69*Locking Plug★ CS63-65C .680–1.125 10–4Locking Connector★ CS63-64C .680–1.125 10–4Locking Flanged Inlet★ CS63-75

50 AMP 3Ø 250V AC 3-Pole 4-Wire Grounding Non-NEMADESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Locking Receptacle★ CS83-69*Locking Plug★ CS83-65C .680–1.125 10–4Locking Connector★ CS83-64C .680–1.125 10–4Locking Flanged Inlet★ CS83-75

50 AMP 480V 2-Pole 3-Wire Grounding Non-NEMADESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Locking Receptacle★ CS84-69*Locking Plug★ CS84-65C .680–1.125 10–4Locking Connector★ CS84-64C .680–1.125 10–4Locking Flanged Inlet★ CS84-75

50 AMP 3Ø 480V AC 3-Pole 4-Wire Grounding Non-NEMADESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Locking Receptacle★ CS81-69*Locking Plug★ CS81-65C .680–1.125 10–4Locking Connector★ CS81-64C .680–1.125 10–4Locking Flanged Inlet★ CS81-75

*Uses Weatherproof Cover, Cat. No. 7788-CR or 7770.For Corrosion Resistant Locking Devices, please check pages K2–K5All devices are UL Listed. Also CSA certified except where indicated by★

G

W

NON-NEMA

W

G

G

W

NON-NEMA

GR

WY

Y

XG

NON-NEMA

G

Y

X

EQ GRX

Y

W

NON-NEMA

X

Y

W

EQ GR

Y X

Z

EQ GR

NON-NEMA

YX

Z

EQ GR

EQ GR

Z

X

Y

NON-NEMA

X

Y

EQ GR

Z

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 21: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J20For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

Weather-Resistant BootsWeather-Resistant Boots

SPECIFICATIONS & FEATURES• Feature a triple seal action to protect straight

blade and locking plugs and connectorsagainst dirt and moisture in harsh applications

• Plug and connector boots available in blackand high-visibility yellow

• Fluted surface and grip-ring design provide anon-slip grip even in wet conditions

WARRANTY• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability, Rated HBOperating Temperature: -40°C to 90°C

Boots for 15 AMP Industrial Locking Plugs and ConnectorsDESCRIPTION CAT. NO.Locking Plug Boot, Black Thermoplastic Elastomer 6017-L

Locking Plug Boot, High-Visibility Yellow Thermoplastic Elastomer 6017-LY

Locking Connector Boot, Black Thermoplastic Elastomer 6018-L

Locking Connector Boot, High Visibility Yellow Thermoplastic Elastomer 6018-LY

Boots for 3-Wire 20 AMP & 30 AMP Industrial Locking Plugs and ConnectorsDESCRIPTION CAT. NO.3-wire Locking Thermoplastic Elastomer Plug Boot, Black 6031

3-wire Locking Thermoplastic Elastomer Plug Boot, High Visibility Yellow 6031-Y

3-wire Locking Thermoplastic Elastomer Connector Boot, Black 6032

3-wire Locking Thermoplastic Elastomer Connector Boot, High Visibility Yellow 6032-Y

Boots for 4 and 5-Wire 20 AMP & 30 AMP Industrial Locking Plugs and ConnectorsDESCRIPTION CAT. NO.4 & 5-wire Locking Thermoplastic Elastomer Plug Boot, black 6033

4 & 5-wire Locking Thermoplastic Elastomer Plug Boot, High Visibility Yellow 6033-Y

4 & 5-wire Locking Thermoplastic Elastomer Connector Boot, black 6034

4 & 5-wire Locking Thermoplastic Elastomer Connector Boot, 6034-YHigh Visibility Yellow

4.92 (125.0 mm)Ø 2.81 (71.4 mm)

3-WIRE LOCKING CONNECTOR BOOTCat. No. 6032

5.16 (131.0 mm)Ø 2.96 (75.1 mm)

4 & 5-WIRE LOCKING CONNECTOR BOOTCat. No. 6034

2.73 (69.4 mm)Ø 2.00 (50.8 mm)

LOCKING PLUG BOOTCat. No. 6017-L

6017-LY

6032

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 22: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J21 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

23000-HG

20 AMP 125V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle *23000-HGwith a Thermoset body

Locking Connector *23001-HG .250–.656

Locking Plug *23004-HG

20 AMP 125V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 23030

Locking Connector 23031-A .256–.656

Locking Plug 23034-A

30A-600VAC / 20AMP – 250V DC 3-Pole 4-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Flush Receptacle 20403

Locking Connector 21414-B .360–.484

Locking Plug 21415-B

30A-600VAC / 20AMP – 250V DC 4-Pole 5-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NON-NEMA

(inches) (stranded) CONFIG.Single Receptacle with Fiberglass Reinforced 25403Nylon Interior with Cast Iron and Steel Shell. Fits FS or FD boxes

Locking Connector 25414-B .625–1.0

Locking Plug 25415-B

*UL listed for “HOSPITAL USE ONLY” applications in non-hazardous locationsFor appropriate wallplates for listed receptacles, please see Section G.All devices are UL Listed and CSA certified.

Y

X

GR

RECEPTACLEB

GR

W

Y

X

GR

RECEPTACLEB

GR

W

Z

Y

X

GR

RECEPTACLE

Y

X

GR

XW

Y

Z

EQ GR

RECEPTACLE

Y

X

Z

WGR

Locking Power Interrupting DevicesLocking Power Interrupting DevicesIndustrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 23: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J22For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

15 AMP 125V 2-Pole 2-Wire Non-GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Midget Locking Plug ML1-P .218–.43 18–14

Angle Plug ML1-AP .218–.43 18–14

Midget Locking Connector ML1-C .218–.43 18–14

Angle Connector ML1-AC .218–.43 18–14

Plastic Midget Locking ML1-PBFlanged Inlet Plastic Midget Locking ML1-PERFlanged Outlet Metal Inlet ML1-MB

Metal Outlet ML1-MER

15 AMP 125V 2-Pole 3-Wire GroundingDESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA

(inches) (stranded) CONFIG.Midget Locking Plug ML2-P .218–.43 18–14

Angle Plug ML2-AP .218–.43 18–14

Midget Locking Connector ML2-C .218–.43 18–14

Angle Connector ML2-AC .218–.43 18–14

Plastic Midget Locking ML2-PBFlanged Inlet Plastic Midget Locking ML2-PERFlanged Outlet Metal Inlet ML2-MB

Metal Outlet ML2-MER

15 AMP 125/250V 3-Pole 3-Wire Non-Grounding★

DESCRIPTION CAT. NO. CORD DIA. WIRE GAUGE NEMA (inches) (stranded) CONFIG.

Midget Locking Plug ML3-P .218–.43 18–14

Angle Plug ML3-AP .218–.43 18–14

Midget Locking Connector ML3-C .218–.43 18–14

Angle Connector ML3-AC .218–.43 18–14

Plastic Midget Locking ML3-PBFlanged Inlet Plastic Midget Locking ML3-PERFlanged Outlet Metal Inlet ML3-MB

Metal Outlet ML3-MER

15 AMP 125V 2-Pole 2-Wire Non-GroundingDESCRIPTION CAT. NO. PLUG CAT. NO. ANGLE PLUG NEMA

CONFIG.Midget Straight Blade Plug MS2-P MS2-APBlack & White Nylon

All devices are UL Listed. Also CSA certified except where indicated by★

MIDGET LOCKING PLUGCat. No. ML2-P

1.13

(28

.6 m

m)

1.88 (47.7 mm)

Ø 1

.26

(32.

0 m

m)

1.13

(28

.6 m

m)

2.34 (59.5 mm)

Ø 1

.26

(32.

0 m

m)

MIDGET LOCKING CONNECTORCat. No. ML2-C

SPECIFICATIONS & FEATURES• Offer a smaller form factor for limited-space

applications• Locking Plugs and Connectors feature

heavy-duty construction for top performancein the environmental extremes of gruelingindustrial settings

• Flanged Inlets and Outlets are built to endurehard use with rugged nylon flanges thatassure a smooth, flush fit and outstandingresistance to cracking and breaking

TESTING & CODE COMPLIANCE• All receptacles, plugs, connectors, inlets and

outlets are designed to meet NEMA WD-6,and ANSI C-73, and to meet/exceed UL 498standards

• UL Fed. Spec. Listed WC-596 (File No. E-13393)

• CSA Certified (File No. LR-406)• NOM Certified (#057)

• Backed by a Lifetime Warranty

MATERIAL CHARACTERISTICSEnvironmental: Flammability per UL94 or CSAC22/06 RequirementsOperating Temperature: -40°C to 60°C

W

NEMA ML1

W

W

X

Y

NEMA ML3

W

X

Y

WNEMA MS2-P

W

G

NEMA ML2

W

G

Midget Locking DevicesMidget Locking Devices

ML1-P

ML1-C

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 24: Locking INDUSTRIAL GRADE LOCKING DEVICES Devices

J23 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

Combination Locking & Straight Blade/Integrated Inlets & OutletsCombination Locking & Straight Blade/Integrated Inlets & Outlets

Combination Locking and Straight Blade Duplex Receptacle15 AMP 125V 2-Pole 3-Wire Grounding Back and Side WiredDESCRIPTION CAT. NO. NEMA CONFIG.Duplex Combination Locking & Straight Blade 4792Receptacle with Common FeedDuplex Combination Locking & Straight Blade 4794-1RReceptacle with 2 Hot Feeds, 1 Neutral ReturnDuplex Combination Locking & Straight Blade 4795-2RReceptacle with Split Feed — 2 Hot Feeds, 2 Neutral Returns

Integrated Power Inlets and Outlets with Weather-Resistant Covers■ Engineered to IP 64 and NEMA 3R Protection Ratings

■ Suitable for Industrial Indoor and Outdoor Use

Integrated Power Inlets and Outlets with Weather-Resistant CoversGray, Glass-Filled Thermoplastic Cover and White, Nylon Device

DESCRIPTION CAT. NO. FLANGED INLET CAT. NO. FLANGED OUTLET

Standard Wire Wells, 4716-CWP 4715-CWP15A-125V 2-Pole, 3-Wire

Slots for Fork Terminals, 4716-FWP 4715-FWP15A-125V 2-Pole, 3-Wire

Standard Wire Wells, 4586-CWP 4585-CWP15A-250V 2-Pole, 3-Wire

All devices are UL Listed and CSA Certified.Note: For straight blade configurations, please see Section H.

L5-15R

W

G

5-15RG

W

NEMA L5-15P

W

G

NEMA L5-15R

W

G

NEMA L5-15P

W

G

NEMA L5-15R

W

G

NEMA L6-15P

G

X

Y

NEMA L6-15R G

X

Y

4792

4716-CWP

SPECIFICATIONS & FEATURESCombination Devices• Impact-resistant black thermoplastic nylon

face and body• Smooth face does not collect dirt• Large, triple-wipe brass “T” contacts for

superior contact and conductivity• Triple-combination terminal screws• Back and side wire options accept #10–#14

AWG stranded or solid wireIntegrated Devices• Glass-filled thermoplastic cover and plate

provide outstanding impact resistance anddurability

• Dual gaskets, one under plate and one underlid, for weather-resistant fit

• Stainless steel external hardware resists corrosive effects of moisture

• Large thumb-tab makes it easy to open coverwith gloved hand

• Mounts to panels or FS/FD boxes• UL Listed and CSA Certified for wet locations

with cover closed

TESTING & CODE COMPLIANCECombination Devices• UL Listed (File #E-13393)• CSA Certified (File #LR-406)• NOM Certified (#057)• Backed by a Limited 10-Year WarrantyIntegrated Devices• UL Listed (File #E-13397)• CSA Certified (File #LR-16347)• NOM Certified (#057)• IP 64 Suitability Rating (protected against

dust and splashing water)• NEMA Type 3R Enclosure Rating when prop-

erly installed (protected against rain, sleetand damage from external ice formations)

• Backed by a Limited 2-Year Warranty

MATERIAL CHARACTERISTICSCombination DevicesEnvironmental: Flammability, Rated V2Operating Temperature: -40°C (without impact)to 60°C maximum continuousIntegrated DevicesEnvironmental: VO Flammability Rating per UL 94Operating Temperature: -40°C to 60°C

INTEGRATED LOCKING POWER INLETS AND OUTLETS WITH WEATHER-RESISTANT COVERS

(46.6 mm)1.88

(82.

6 m

m)

3.25

(115

.9 m

m)

4.56

(72.2 mm)2.84

(42.

8 m

m)

(52.

96 m

m)

1.69

(33.8 mm)1.33

(3.2 mm)0.13

(37.8 mm)1.49

2.08

5

2.77

(70

.4 m

m)

4.06

(10

3.2

mm

)

1.44 (36.4 mm)

1.18 (30.0 mm)

3.28

(83

.3 m

m)

COMBINATION LOCKING AND STRAIGHTBLADE DUPLEX RECEPTACLE

Industrial Grade

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com