LABORATORYPRODUCT GUIDE

THE NEXT GENERATION OF LABORATORY WATER PURIFICATION SYSTEMS

PURITE WATER PURIFICATION SYSTEMS

Purite specialises in the design, development and manufacture of advanced, high performance laboratory water purification systems.

Every system is designed to meet the needs of specific applications, providing high levels of water quality, consistency and reliability using a wide range of advanced technologies.

Purite also offers full technical support, training and aftermarket services, to ensure a maximum return on investment and unrivalled value for its customers.

WHICH PURITE SYSTEM?

Purite systems offer the best water purification solution for laboratory applications. Each system is designed to provide the exact purity and volume of water required based on the quality of the feed water and the nature of the application, while also meeting storage and distribution requirements.

LABWATER DEIONISERS

A simple, cost effective method of producing 1 – 10µS/cm purified water at low volumes.

The Labwater units incorporate an easily replaceable cartridge, containing specifically designed resin, which colour changes through absorption of ionic contaminants, facilitating a low level of maintenance. On complete colour change from blue to brown, replace the cartridge.

The units are available in two versions offering maximum flow rates of 30 and 60 litres per hour and come complete with:

Wall brackets and connections Deionisation cartridge plus one spare Colour change resin Inlet on/off valve with 12mm hose connector Outlet spout with flexible pipe

The units are typically wall mounted and are simply connected via a dedicated hose (supplied separately) to a tap or stopcock and operate direct from water pressure thus requiring no external electrical supply.

32

Technical Specification Labwater 1 Labwater 2

Max. feed pressure (bar) 0.5 – 5 0.5 – 5

Max. feed flow rate (l/hr) 30 60

Output capacity, litres

@ 50 mg/l tds (soft) 640 1280

@ 200 mg/l tds (medium-hard) 160 320

@ 300 mg/l tds (hard) 106 212

pH Neutral

Conductivity 1 – 10µS/cm

Dimensions Labwater 1 Labwater 2

Width (mm) 80 80

Depth (mm) 100 100

Height (mm) 580 760

Max shipping weight (Kg) 2.8 4.4

Max working weight (Kg) 2.5 3.5

Installation requirements

Feed water Potable

Maximum TDS (ppm) 1000

Feed water temperature 1-350Ctds = total dissolved solids

1000 500 250 50 30 20 10 5 1 0.2 0.1 0.06 0.055

Raw or feed water RO or primary water Single distilled Double distilled Ultra Pure

3 2 1

II III I

Dual quality

Requires RO purified feed water

LABWATER 1 AND 2

SELECT DESCALE

SELECT ANALYST

SELECT PUREWATER 300

SELECT HP

SELECT BIO

SELECT FUSION

INTEGRATED SYSTEMS / INTEGRA

NEPTUNE RANGE

0.001 0.002 0.004 0.02 0.033 0.05 0.1 0.2 1 5 10 15

0.056

18 18.2

µS/cm

Common terms

BS EN ISO 3696 (Grade)ASTM D1193-06 (Type)*

Conductivity

Resistivity MΩ.cm

IV

* Based on resistivity only

THE SELECT PRODUCT RANgE

The Select range of water purification systems is available in four standard models: Descale, Analyst, HP, and Bio, which provide a choice of water qualities and outputs of up to 48 litres per hour; plus the specialised Purewater 300, Fusion and Neptune versions.

Additional options for the Select range include external tanks, with ultraviolet (UV) and 0.2μm air vent filters if required, boost pumps for applications with low water pressure (<4 bar), and a choice of installation methods.

THE NExT gENERATION OF WATER PURIFICATION

The Select range of high performance water purification systems offers a unique combination of reliability, quality and functionality for all laboratory applications.

Built upon core water purification techniques, the range offers a flexible package to suit a wide range of applications.

The key benefits of the Select range include:

Range of technologies Reverse osmosis; a total membrane process which

can remove >98% minerals and >99% bacteria from potable water.

Irradiation; applied at 254 or 185nm to destroy micro organisms or to reduce Total Organic Carbon (TOC) levels.

Filtration; incorporates a wide range of sub-micron ratings which can be used to effectively reduce levels of bacteria, endotoxin, RNases and DNases from ultrapure water.

Ion-exchange; specifically selected nuclear grade resin combined with high activity absorbents to produce an ultra pure water quality (18.2MΩ.cm) with low TOC.

Easy to use A clear touch screen panel for easy menu navigation providing fingertip diagnostic functionality.

A range of menu features simplify operation and identification of key parameters.

Multiple dispense options available.

Simple to maintain The Select range of long life cartridge packs and consumables are easy to change.

Semi-automated cleaning and sanitising routines minimise operator intervention.

Audible alarms for critical system conditions or routine operations.

Complete reliability High quality, long life pre-treatment modules based on proven technology ensure a consistent supply of purified water.

Quick to configure and install A modular, optimised design enables quick system construction and configuration and simplifies installation and set-up.

Maximum flexibility A space-saving design, with minimal external connections makes the units portable around the laboratory and allows for bench-top, wall mounted or under bench installation.

Select HP, Bio, Fusion and Neptune offer additional flexibility via the option of a dispensing pod.

Easy to service Service engineers are available as part of our maintenance care programmes, which can be tailored to meet your exact requirements.

Accreditation Water qualities comply with the BS EN ISO3696 and ASTM D1193-06 industry standards and all units are manufactured within ISO9001:2008 guidelines.

SELECT TANk AND PUMP

The Select tank and pump range stores and distributes Purified water. It is designed for use with the Select range of water purification units.

The range includes four models that offer either 50 or 100 litre working volume and capable of delivering flow rates of up to 300 litres per hour at 4 bar.

54

OUTLET QUALITY U: 17.9MΩ

MENUSTOP

RO

UVDI

DISPENSE

TOUCHSCREEN PANEL ExAMPLE*

* For illustrative guide only

The remote pod is available on all Select models

LABORATORY SPECIFICATIONS

Descale / Analyst HP / Bio / FusionPurewater Neptune

40 / 80 / 160 320 40 / 80 / 160 320

Width (mm) 440 310

Depth (mm) 560 560

Height (mm) 750 750

Max shipping weight (kg) 28 33 36 41 25 29

Max working weight (kg) 43 51 51 59 51 21

Installation requirements

Power 100-230V/50-60 Hz

Feed water Potable <20µS/cm

Maximum TDS (ppm) 1000 <14

Minimum inlet pressure – psi (bar) 30 (2.1) 5 (0.34)

Maximum inlet pressure – psi (bar) 90 (6.2) 20 (1.38)

Feed water temperature 1-350C

Units

Dimensions

The Select Specifications: SELECT DESCALE

The Select Descale is a cost effective solution for primary pure water needs. The unit is designed for applications such as humidification and hydroponics, and providing a pure water feed to centralised systems and polishers.

SELECT ANALYST

The Select Analyst is ideal for everyday pure water laboratory tasks, including glassware rinsing, buffers and stains, reagent make-up, and media preparation.

SELECT HP

The Select HP provides a consistent supply of high quality pure water, making it suitable for HPLC, ion chromatography, atomic absorption, and clinical analyser feed.

SELECT BIO

The Select Bio is designed for applications that require high quality pure water with an enhanced microbiological specification, such as; tissue culture, IVF, life science and molecular biology applications.

76

Product Outputs*Unit Size

40 80 160 320

@ 10ºC (l/hr) 3.6 7.2 14.4 30

@ 25ºC (l/hr) 6 12 24 48

Treated Water Quality Specification Descale Analyst HP Bio

Inorganics >98% rejection >1MΩ.cm >10MΩ.cm >10MΩ.cm

pH1 5 – 7 Neutral

Bacteria >99% rejection3 >99% rejection3 <1cfu/ml <0.1cfu/ml

Organics – TOC (ppb) Typically <1002 <50 <20 <10

Particles – – <0.1μm Ultrafiltration

Endotoxins – – – <0.001EU/ml

DNases – – – <4pg/μl

RNases – – – <0.01ng/ml

1 pH of stored water may decrease due to absorption of free carbon dioxide2 Organics with molecular weight of >100 Daltons3 When measured directly across the membrane

* Product outputs based on a feed water pressure of 4 bar

Technical Specification Descale Analyst HP Bio

Pure water storageOptional 20 litre

(External 50 & 100 litre tanks available)

Display panel LCD – Colour touch screen

Pre-treatment cartridge

Reverse osmosis Automatic RO

membrane flush

Deionisation cartridge x

Internal filtration x x 0.1μm Ultrafiltration

Point of use x x 0.2μm 0.2μm

UV lamp x x x

Recirculation pump x x

POINT OF USEFILTRATION

PRE-TREATMENT DEIONISATION

DESCALE

ANALYST / PUREWATER 300

HP & BIO

REVERSEOSMOSIS

STORAGE

UV(BIO ONLY)

ULTRA ORMICRO-

FILTRATION

RECIRCULATIONPUMP

Select Range & Purewater 300 combined process flow

SELECT FUSION

The Select Fusion is purpose built for analytical and life science applications that need small volumes of ultrapure water to 18.2MΩ.cm from a mains supply, typically up to 50 litres per day, in addition to purified water for general laboratory use.

The self-contained, dual quality system integrates pre-treatment, reverse osmosis, UV photo-oxidation, ion exchange and sub-micron filtration technology in a single, robust and compact enclosure.

A high contrast LCD shows system status, including water quality, TOC, temperature and flow rates. Visual and audible alarms are also included, while event data can be downloaded via a standard USB port.

The system provides take-off through either an ultrapure water dispenser or a separate bib tap. When it is not being used, water quality is enhanced by automatic recirculation.

The Select Fusion can be wall or bench mounted and is supplied with an installation kit and a full set of consumables. An optional boost pump is also available for areas with <4 bar feedwater pressure.

98

Treated Water Specification High Purity Dispense Purified Water Storage Tank

Inorganics up to 18.2MΩ.cm >1MΩ.cm

pH1 Neutral

Bacteria <1cfu/ml >99% rejection2

Organics – TOC (ppb) <5 <50

Particles <0.2μm –

Endotoxins <0.001EU/ml –

DNases <4pg/μl –

RNases <0.01ng/ml –

1 pH of stored water may decrease due to absorption of free carbon dioxide2 When measured directly across the membrane

Technical Specification Fusion

Pure water storage 20 litre

Display panelLCD – colour touch screen

Pre-treatment

Reverse osmosis

Deionisation cartridge

Ultrapure polishing

cartridge

UV lamp Dual wavelength

Internal filtration Ultrafiltration

Point of use filtration 0.2μm

Recirculation

PRE-TREATMENT REVERSEOSMOSIS

PRIMARYDEIONISATION

POLISHINGDEIONISATION

RECIRCULATIONPUMP

ULTRAFILTRATION

POINT OF USEFILTRATION

STORAGE

PHOTO-OXIDATION

Select Fusion process flow

SELECT PUREWATER 300

The Select Purewater 300 is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1MΩ.cm at a flow rate of up to 48 litres per hour.

The system is compact, robust, simple to use and easy to maintain, using proven pre-treatment, reverse osmosis and ion-exchange deionisation technology to ensure a reliable and consistent supply of purified water.

The unit has standard connections for quick installation, with a high flow outlet that fits easily to most glassware washing machines using a conventional gravity feed. It incorporates a standard 20 litre integral tank or can be supplied with an optional external 100 litre tank for extra capacity.

The Purewater 300 can also be supplied with an optional boost pump to ensure optimum performance at all times, especially in areas where incoming feed water pressure is below 4 bar.

Treated Water Specification Purewater 300

Inorganics >1MΩ.cm

pH1 Neutral

Bacteria >99% rejection2

Organics – TOC (ppb) <50

1 pH of stored water may decrease due to absorption of free carbon dioxide2 When measured directly across the membrane

Technical Specification Purewater 300

Pure water storage 20 litre tank

(External 100 litre tank available)

Display panelLCD – Colour touch screen

Pre-treatment cartridge

Reverse osmosis

Deionisation cartridge

Output @ 25˚C 48 l/hr

Output @ 10˚C 30 l/hr

INTEgRA L

Integra water purification units use proven reverse osmosis technology, in conjunction with activated Carbon and particulate filtration as part of the first stage of purification. Water from the first stage is stored in an integral stainless steel tank providing a continuous feed to a ringmain. To maintain microbiological purity, the circulating water is continually purified using UV and membrane filtration technology.

The systems are configured to run on both hard and soft feed water; Integra LH and LS respectively.

As standard, all Integra systems are equipped with sophisticated integral data logging technology providing a historic traceability for key operating parameters.

1110

Process Specification Integra L

Pre-treatment 5µm filter

Reverse osmosis

Pure water storage Up to 250 litres

Deionisation1 Optional

TOC reduction1 Optional

UV lamp2 Optional 254nm

Internal filtration2 Optional 0.2µm

Recirculation Variable speed

Display LCD

Purified water make-up flow rate @ 10˚C3 225 – 600 l/hr

Purified water distribution Up to 3000 l/hr

1 10, 15, 18MΩ.cm polishing deionisation packs available including activated carbon for TOC reduction2 Included in BioPack3 Softened feed water required for 600 l/hr (Integra LS). Integra LH can operate on hard water up to

400ppm as CaCO3

1 For enhanced inorganic and organic quality the unit can be fitted with either 10,15 or 18MΩ.cm polishing deionisers packs. Typical TOC levels <50ppb

2 Optional ‘BioPack’ will provide purified water with a total viable count of <1cfu/ml, endotoxin level <0.25EU/ml and particles <0.2μm

Treated Water Quality Specification Integra L

Inorganics1 <30µs/cm

pH 5 – 7

Bacteria2 >99% rejection

Organics1 >99% rejection

Particles2 0.2µm

Endotoxins2 0.25EU/ml

BOOSTPUMP

BACTERICIDALUV LAMP*

RINGMAINFLOW

SUB-MICRONFILTRATION*

RECIRCULATIONPUMP

FEED BREAKTANK

PRE-TREATMENT

PURIFIED WATER STORAGEREVERSE OSMOSIS

RINGMAINRETURN

* OPTIONAL BIOPACK

Integra L process flow

Dimensions Integra L

Width (mm) 1000

Depth (mm) 750

Height (mm) 1800

Max shipping weight (Kg) 310

Max working weight (Kg) 550

Installation requirements

Power 230V/50-60Hz

Feed water Potable3

Maximum TDS (ppm) 1000

Min inlet pressure - psi (bar) 45 (3.1)

Max inlet pressure - psi (bar) 90 (6.2)

Feed water temperature 1-350C

SELECT NEPTUNE

The Select Neptune range provides a high flow of guaranteed 18.2MΩ.cm ultrapure water for analytical and life science laboratory applications.

Three models are available in the range: Analytical, featuring a low TOC specification; Life Science, offering low bacteria, endotoxins and RNases/DNases specification; and Ultimate, which combines the benefits of both the Analytical and Life Science models. Each unit produces between 1.5 and 2 litres of ultra-pure, 18.2MΩ.cm, purified water per minute from a feedwater source of <20μS/cm.

The range utilises a number of proven technologies to produce ultra-pure, 18.2MΩ.cm water, including:

Ion exchange cartridges incorporating monospherical, semiconductor grade mixed bed deionising resin with a low TOC leaching profile and a high activity organic absorption media.

Sub-micron and ultrafilter to remove particles, bacteria and endotoxins.

185nm or photo-oxidising UV to cleave organic compounds into smaller charged ionic species that can be removed by ion exchange (Analytical and Ultimate).

254nm UV to reduce bacteria by more than 99%.

All Neptune models recirculate purified water to maintain its quality and include data capture for traceability and intelligent monitoring systems that place the unit into standby when it’s not in use. They also feature semi-automated cleaning and sanitising routines, TOC indication and alarms for cartridge, UV and filter replacement.

Treated Water Specification Analytical Life Science Ultimate

Inorganics 18.2MΩ.cm

pH Neutral

Bacteria <1cfu/ml <0.1cfu/ml <0.1cfu/ml

Organics – TOC (ppb) <1 <5 <1

Particles <0.2µm Ultrafiltration Ultrafiltration

Endotoxins <0.25EU/ml <0.001EU/ml <0.001EU/ml

DNases – <4pg/µl <4pg/µl

RNases – <0.01ng/ml <0.01ng/ml

Technical Specification Analytical Life Science Ultimate

Display panel LCD – Colour touch screen

Pre-treatment Reverse osmosis feed or filtered to <0.2µm and <20µS/cm

Ultrapure polishing cartridge

UV lamp185nm

photo-oxidationDual wavelength

185/254nmDual wavelength

185/254nm

Internal filtration 0.2µm Ultrafiltration Ultrafiltration

Point of use filtration 0.2µm 0.2µm 0.2µm

Recirculation

Dispense modes Latched – hold – volumetric

Dispense flow rate up to 2.0 l/min up to 1.5 l/min up to 1.5 l/min

POINT OF USEFILTRATION

FILTRATION**BACTERICIDALUV*

POLISHINGDEIONISATION

PRIMARYDEIONISATION

PHOTO-OXIDATION

RECIRCULATIONPUMP

WATERINLET

* LIFE SCIENCE AND ULTIMATE ONLY** ULTRA-FILTRATION (LS / ULT) ONLY

Select Neptune process flow

SI0030-05

PURITE SERVICE, SUPPORT AND ACCREDITATION

Purite’s laboratory water purification systems are all backed with a professional level of customer support, including ongoing technical and application advice and assistance – either direct or via its network of distributors. In addition to research, development and engineering facilities, Purite offers on-site consultancy, trouble-shooting and product training.

A team of experienced and regionally based engineers provide support for critical applications and are complemented by a full stock of consumables and replacement parts. Purite also provides a choice of maintenance options to extend the operating efficiency of each system still further.

gLOBAL AND ExPORT

As a global player, Purite offers dedicated resources through a comprehensive network of over 50 distribution channels, encompassing North America, Asia, Europe, Africa and Australasia.

Purite’s complete and innovative range is supported by an approved local distributor, ensuring a secure and cost-effective service and supply of critical laboratory equipment.

ABOUT PURITE

For over 30 years Purite has been designing,developing and manufacturing an extensive rangeof water purification systems for the healthcare,research and industrial sectors. A specialist inadvanced technologies such as ion exchangeand reverse osmosis, Purite also offers dedicatedresources through a comprehensive network.

Purite is a wholly owned subsidiary of Ondeo Industrial Solutions (SUEZ ENVIRONNEMENT) – a major water solutions provider. Ondeo Industrial Solutions operates and maintains over 200 watertreatment plants and has built more than 2,000industrial wastewater treatment plants.

For unrivalled global reach, Purite is backed bythe vast resources of SUEZ ENVIRONNEMENT(Paris: SEV, Brussels: SEVB) – the parent companyof Ondeo IS. As a world leader, exclusively dedicatedto environmental services, SUEZ ENVIRONNEMENTsupplies drinking water to 76 million people, provideswastewater treatment services to 44 million peopleand collects waste produced by 60 million people.

Purite Limited Bandet Way, Thame, Oxon, OX9 3SJ, UK

T: +44 (0)1844 217141 E: contactus@purite.comF: +44 (0)1844 218098 W: www.purite.com

Errors and omissions excluded. Purite reserves the right to change the specification in accordance with our programme of continuous improvement. Images for illustration purposes only.

Water Purification Systems

Elite MediQADouble pass reverse osmosis units

500 - 4,000 L/hr

High recovery rates; output fl ow rates from 500 to 4,000 l/hour. Units can be confi gured to run in multiple

combinations to provide redundancy. Full colour touch screen display with

comprehensive menu navigation including full schematics.

Advanced data logging technology with password control. Data log fi le can be downloaded to a PC using

a memory stick, providing access to historical performance data for full traceability. Semi-automated chemical cleaning program with

on screen reminder function. Lightweight, corrosion resistant GRP or optional

stainless steel pressure vessels. Compact, stainless steel skid mounted package.

SS0043-03

Elite MediQA: double pass reverse osmosis range

Purite Elite MediQA double pass RO units provide an innovative, high quality water purifi cation system for haemodialysis and haemodiafi ltration.

Our fl exibility and strength of design ensures that the Elite MediQA range meets the needs of your dialysis requirements, now and in the future.

The range provides a unique set of benefi ts which allows unrivalled ease of operation and performance. All of our models meet the requirements of the Medical Device Directive 93/42/EEC and are CE marked as Class IIb Medical Devices.

Purite Limited Bandet Way, Thame, Oxon, OX9 3SJ, UKT: +44 (0)1844 217141 E: contactus@purite.comF: +44 (0)1844 218098 W: www.purite.com

Errors and Omissions excluded. Purite reserves the right to change the specifi cation in accordance with our program of continual improvement.

* Un-crated weight.** Variations in feed water temperature can affect output by up to ± 3% per degree Celsius.

500 DP 750 DP 1000 DP 1500 DP 2000 DP 2500 DP 3000 DP 3500 DP 4000 DP

Performance

Permeate fl ow rate @ 10˚C ** l/hr 500 750 1000 1500 2000 2500 3000 3500 4000

Drain fl ow m3/hr 0.2 0.3 0.4 0.6 0.8 1.0 1.2 1.4 1.5

Dimensions

Height mm 1600 1600 1600 1600 1600 1600 1600 1600 1600

Width mm 1000 1000 1000 1000 1000 1000 1000 1000 1000

Depth mm 1265 1265 1265 1265 1265 1265 1565 1565 1565

Weights

Working kg 453 462 508 525 593 636 689 771 879

Shipping* kg 328 337 323 370 408 438 474 556 634

Services - Feed water

Pressure Minimum feed water pressure 2 bar: maximum 6 bar

Free Chlorine Following activated carbon, free chlorine level must be <0.1 ppm

Temperature For optimum performance feedwater temperature should be between 5˚C and 35˚C

Total dissolved solids Maximum feed water total dissolved solids 1000 ppm

Total hardness All units require softened feed water with a total hardness of <4 ppm as CaCO3

S.D.I Silt density index following fi nal 5 micron fi ltration should be <5

Services - Connections

Feed water 25 DN Feed water connection 1” threaded female BSP

Concentrate 25 DN

All connections in 1” sanitary tri-clampPermeate 25 DN

Ring return 25 DN

Services - Power

Supply V/ph/Hz All units require 3-phase supply 400V +N+E 50/60 Hz

Max current draw Amps 14 15 16 19 21 22 22 22 22

Certificate Number 9956ISO9001, ISO14001, ISO18001

Water Purification Systems

Purite in haemodialysis Centurion 1500: single patient reverse osmosis unit

SI0045-01

Centurion 1500 for haemodialysisCenturion 1500 is an innovative, high quality water

purification solution for the promotion and easy management

of self-care at home as well as more traditional in-centre

treatments. Our single patient unit is simple to use and

has the capability of obtaining optimum microbiological

performance as well as the prescriptive water quality which

is essential for any haemodialysis application.

Centurion 1500 uses proven reverse osmosis technology

combined with either heat or chemical sanitisation, to

provide a unique combination of performance, reliability and

functionality.

All of our units are manufactured in the UK, under the

control of ISO9001:2008 & ISO 13485:2008 procedures,

with full design and engineering traceability, ensuring full

compliance with the Medical Device Directive.

Our excellent after sales service, together with in-house

manufacture, offers unparalleled peace of mind for the

single patient RO units.

Bringing haemodialysis safely to the homeThe units are compact in design and have been innovatively developed to provide exceptional ease

of use. All units are fully tested to meet the requirements of the Medical Device Directive (MDD)

93/42/EEC, and are CE marked as Class IIb Medical Devices.

The unique design and touch screen control makes home care a real choice and, coupled with

optional heat sanitisation capability, ensures that patient care is maintained within the home

environment.

Our design allows for continual use, even in hard water areas, ensuring water purification

technology can be delivered securely for patient care.

Centurion 1500 technologyThe Centurion 1500 is available with a choice of configurations and can be routinely

operated within a hard water environment (routine membrane maintenance

dependent), allowing maximum flow rates of 1500 milliliters per minute to be

obtained as standard. Purite systems for dialysis applications comply with the latest

guidelines for haemodialysis and are approved to the Medical Device Directive

93/42/EEC.

l

l

l

l

l

l

l

l

l

l

l

l

l

l

Maximum flow rates of 1500 milliliters per minute.

The permeate specification exceeds most recognised haemodialysis standards.

State of the art, touch screen display for easy control.

Integrated hot water sanitisation option for enhanced microbiological

performance.*

Optional data logging.

CAT5 compliant break tank.

Quiet operation.

All models have a semi-automated chemical cleaning program.

Recirculation up to the point of use.

Internal leak detection system for peace of mind within the home

environment.

Dedicated purpose-built trolley is available for portability.

Optional ultra-filtration module is available providing

enhanced microbiological specification.

Audible alarm with mute facility.

Antimicrobial coated fascia.

* Centurion 1500+

Purite Limited, Bandet Way, Thame, Oxon OX9 3SJ, UK.Tel: +44 (0)1844 217141 Fax: +44 (0)1844 218098Email: contactus@purite.com Website: www.purite.com

SI0045-01

About PuritePurite, a subsidiary of Ondeo Industrial Solutions, designs, develops and manufactures water purification

systems for use in applications in both the healthcare and research sectors and throughout industry. The

company specialises in a wide range of technologies, including ion exchange, carbon filtration, reverse

osmosis, electro-deionisation and ultrafiltration. Purite solutions can be supplied as stand-alone units or as

fully integrated systems with production capacities up to many thousands of litres per hour. In every case, the

company provides full installation, technical and service support. Purite has been established for over 25 years

and is accredited to ISO 9001:2008.

Technical Data

Performance

Product Output (max) 1500 milliliters per minute @10˚C

Water Quality <100 cfu/ml <0.25 EU/ml

With optional UF fitted1 <0.1 cfu/ml<0.03 EU/ml

Feed Water Parameters

Total Hardness (max) 400 ppm as CaC03

Temperature2 min/max 1/35˚C

Inlet Pressure min/max 2/6 bar

Free Chlorine3 0.5 - 1.0 ppm Cl2

Power Requirements 230V/50Hz

Dimensions (w, d, h) 280mm x 500mm x 840 mm

Shipping Weight4 35 Kg

Technical Specification

1 - In conjunction with Purite’s recommended sanitisation program2 - If the temperature falls below 10˚C output will reduce by up to 3% per ˚C3 - Optional fitration is required if free Chlorine >1ppm or if feed water has a fouling index >54 - Uncrated weight

NotesErrors and omissions excluded. Purite reserves the right to change the specification in accordance with our program of continuous improvement.

Compact, versatile system

Easy to set up, use and maintain

Low running costs

High reliability, low maintenance

Energy saving features

Manual by-pass for emergency cover

Produces 60 to 190 l/hr

INTEGRA HP High quality and high volume pure water for

Clinical Diagnostic Analysers

Water Purification Systems

Specifi cation table:

Treated Water Quality Specifi cation

Resistivity >10 MΩ-cm

pH Neutral

Organics <30 ppb

Particles* <0.2μm

Bacteria* <1cfu/ml

Performance

Make-up fl owrate based on 10°C feedwater 60/120/190 l/hr

Purifi ed water distribution Up to 360 l/hr and a max of 3 bar

Process Technologies

Pre-treatment Disposable carbon media pack

Reverse osmosis Low energy membranes

Carbon dioxide Degassing (optional) Hollow fi bre membrane

Deionisation Nuclear grade mixed bed

Water storage 50 litres

Recirculation pump Variable speed

UV irradiation Bactericidal 254nm

Microfi ltration (optional) 0.2μm

Display Full colour LCD

HP60 HP120 HP190

Installation Requirements

Power 230V 50Hz

Feedwater Hard Potable Softened

Total dissolved solids 1000 ppm

Inlet pressure (min-max) 2-6 bar (30-90 psi)

Feedwater temperature 1-35 deg C

Weights & Dimensions:

Feed water requirements

HP60 HP120 HP190

Dimensions

Width (mm) 890

Depth (mm) 500

Height (mm) 840

Max shipping weight (kg)* 54 64 72

Max working weight (kg) 97 107 117

* includes packaging

* with optional 0.2μm bacterial fi lter

SI0042-03

INTEGRA HP: water purifi cation and distribution for Clinical Diagnostic AnalysersProcess DescriptionThe Integra HP is a compact, mobile, water purifi cation and distribution unit. Fully integrated, it incorporates reverse osmosis, ion-exchange, carbon dioxide membrane degassing (optional), ultra violet irradiation and bacterial fi ltration technologies (optional), to produce purifi ed water that meets requirements of all Clinical Diagnostic Analysers.

Range of make-up rates 60/120/190 l/hr to suit a wide range of Analyser requirements

Integral 50 litre purifi ed water storage tank eliminates the need for external tanks

Carbon dioxide membrane degasser to enhance deioniser capacity (optional)

Range of polishing deionisers for higher volume users Full colour intuitive LCD touch screen for ease of operation Variable speed distribution pump to conserve energy during

periods of low demand Cat5 compliant break tank to comply with water regulations Manual by-pass to provide continuity of service in an emergency

Purite Limited, Bandet Way, Thame, Oxon, OX9 3SJ, UKT: +44 (0)1844 217141 E: contactus@purite.comF: +44 (0)1844 218098 W: www.purite.comErrors and Omissions excluded. Purite reserves the right to change the specifi cation in accordance with our program of continual improvement.

Water Purification Systems

Certificate Number 9956ISO9001, ISO14001, ISO18001

Feed break tank Boost pump

Reverse osmosis

Recirculationpump

UV Lamp Sub-micronfi ltration(optional)

Ringmainfl ow

Purifi ed water storage

Ringmainreturn

Degassing(Optional)

Deionisation

Pre-treatment

Potable water feed

PRESTIGESATELLITE

Renal Reverse Osmosis Unit

Multi patient reverse osmosis (RO)unit.

Integrated pre-filtration. Easy to install and maintain. Graphical user interface. Point of use recirculation. Quiet operation. Semi-automatic chemical clean.

PRESTIGESATELLITE

RENAL REVERSE OSMOSIS UNIT

UNIT DESIGN

Multi patient unit – Designed to supply 4-6 dialysismachines, depending on dialysis set up and machine type.

5µm pre-filter – Protects reverse osmosis (RO) membrane.

Integral tank - Protects against feedwater pressurefluctuations and allows easy cleaning.

Integral boost pump – Enables RO membranes to operate atoptimum performance.

RO membrane – Removes up to 98% of dissolved minerals,and up to 99% of organic, bacterial and particulatecontaminants.

Permeate divert on start-up - Ensures consistent permeatequality.

Audible alarm with mute facility – Provides an alarmmonitoring permeate quality, cleaning chemicalcontamination and over pressure.

User friendly display – Back-lit display clearly showsinformation concerning the unit operation in both text andgraphic formats.

Semi-automatic chemical clean – With automatic chemicaldraw, recirculation and rinse, cleaning is straight forwardand trouble free.

Standby recirculation for use in ITU / Acute applications –Ensures the bacterial quality is maintained so that the unit isready for immediate use.

Flexible start/stop facility – Interface to allow remotestart/stop of the unit either via the dialysis machine, aprogrammable timer, or via a remote key switch.

RS232 Interface – Provides easy connection to a remote PC.

Point of use recirculation – The design of the system meansthat water continually recirculates to the point of use,ensuring the bacterial quality of the water is maintained.

SS0010-01

TECHNICAL DATA

Output @25°C (l/hr) 430

@10°C (l/hr) 250

Feedwater Hardness (Max)1 ppm CaCO3 40

Feedwater Temperature (Min/Max) °C 1 / 35

Feedwater Pressure (Min/Max) bar 2 / 6

Free Chlorine ppm Cl2 <0.1

Optional Pretreatment Cylinder2 CC8

Pure water recovery Max (%) 66

Feedwater consumption Max (l/hr) 651

Drain flowrate Max (l/hr) 221

Power requirements 100-230v/50-60hz

Dimensions (w, d, h) mm 420x548x860

Weight (Working) kg 66

Weight (Shipping) kg 501 For harder water a Purite water softener is required2 Optional pre-treatment required if free chlorine >0.1ppm orfeedwater has a fouling index >5.

Purite Limited, Bandet Way, Thame, Oxon OX9 3SJ, UK.Tel: +44 (0)1844 217141 Fax: +44 (0)1844 218098 Email: mail@purite.com Web site: www.purite.com

The unit is designed for a maximum TDS of 1000 mg/I, and a maximum colloidalindex of 3.

The permeate recovery depends on the raw water quality and the type of pre-treatment.

Errors and omissions excluded. Purite reserves the right to change specificationwithout notice.

OTHER PURITE SOLUTIONS

A single patient reverse osmosisunit, the Prestige Compact is alsoavailable.

A range of cleaning chemicalstogether with CIP (clean in place)trolleys are available to cater forroutine membrane maintenanceand for removing significant levelsof fouling to ensure longmembrane life.

For larger renal dialysisapplications, Purite can design,install and project managebespoke solutions incorporatingfeatures such as fullyautomated heat disinfection.

A range of preventativemaintenance contracts coveringall Purite and OEM equipment isavailable.

MEMBRANE CARE RANGE SYSTEMS SERVICE

ACCESSORIES

Wheel kit – Fully braked wheels designed specifically for the unitto facilitate easy movement.

Cleaning chemicals – A range of cleaning and sanitising chemicalsto ensure the consistent operation of the unit and to prolong thelife of the membrane.