KIWA for G-Com & G-Com UV+
-
Upload
sasi-kiran-vundamatla -
Category
Documents
-
view
217 -
download
4
Transcript of KIWA for G-Com & G-Com UV+
Number 0620-CPD-48114/01 Replaces - Issued 2008-11-01 First edition 2008-11-01 Valid until 2013-11-01
EC-CERTIFICATE OF CONFORMITY 0620-CPD-48114/01 AOC-level 1
Kiwa N.V.
Certification and Inspection Sir W. Churchill-laan 273 Postbus 70
2280 AB RIJSWIJK The Netherlands
Tel. +31 70 414 44 00 Fax +31 70 414 44 20 E-mail [email protected]
www.kiwa.nl
Producer Factory GENTAS A.S. Dolanti Sk No: 21 Siteler 06610 Ankara TURKEY Phone +90.312 353 02 06 Fax +90.312 350 99 17 E-mail [email protected] Internet www.gentas.com.tr
GENTAS GENEL METAL SANAYI VE TICARET A.S. Serpek Mevkii 14841 Mengen/BOLU TURKEY Phone +90.374 356 18 78 Fax +90.374 356 11 60 Fax +90.374 356 11 59 E-mail [email protected] Internet www.gentas.com.tr
This certificate consists of 2 pages. Publication of the certificate is allowed.
Notified Body 0620, Kiwa Certification has determined that
GENTAS A.S. Fulfils all provisions concerning the attestation of conformity and the performances described in Annex ZA of the standard EN 438-7:2005 and are applied and that the product fulfils all the prescribed requirements. Product: G-com Compact High-pressure decorative laminate (HPL) panels for internal finishes Task GENTAS A.S. Task Kiwa Certifcation Factory Production Contol Initial Type Testing Further testing of factory Samples
Certification of FPC
Surveillance of FPC Audit testing of samples Kiwa N.V.
ing. B. Meekma Director Certification and Inspection
EC-CERTIFICATE OF CONFORMITY 0620-CPD-48114/01 AOC-level 1 In compliance the Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to the construction products (Construction Products Directive - CPD), amended by the Directive 93/68/EEC of the Council of European Communities of 22 July 1993, it has been stated that the construction product
G-com Compact High-pressure decorative laminate (HPL) panels for internal finishes
Covering: • CGF – Interior Compact General-purpose Flame-retardant grade • CGS – Interior Compact General-purpose Standard grade
with field of direct application:
• Compact high-pressure decorative laminate (HPL) panels for internal wall and ceiling finishes and • Compact high-pressure decorative laminate (HPL) panels for internal suspended ceilings
placed on the market by:
GENTAS A.S. Dolanti Sk No. 21
Siteler 06610 Ankara, TURKEY Phone : +90.312 353 02 06 Fax : +90.312 350 99 17 E-mail : [email protected] Internet : www.gentas.com.tr
and produced in the factory:
GENTAS GENEL METAL SANAYI VE TÌCARET A.S. Serpek Mevkii 14841 Mengen/BOLU - TURKEY
Phone : +90.374 356 18 78 Fax : +90.374 356 11 60 Fax : +90.374 356 11 59 E-mail : [email protected] Internet : www.gentas.com.tr
is submitted by the manufacturer to a factory production control and to the further testing of samples taken at the factory in accordance with a prescribed test plan and that the approved body
- 0620 Kiwa N.V. -
has performed the initial type-testing for the relevant characteristics of the product, the initial inspection of the factory and of the factory production control and performs the continuous surveillance, assessment and approval of the factory production control. This certificate attests that all provisions concerning the attestation of conformity and the performances described in Annex ZA of the standard
- EN 438-7:2005 -
were applied and that the product fulfils all the prescribed requirements. This certificate was first issued on 01-11-2008 and remains valid as long as the conditions laid down in the harmonised technical specification in reference or the manufacturing conditions in the factory or the FPC itself are not modified significantly, and latest on 01-11-2013.
Page 2 of 2