kasipkor.kzkasipkor.kz/wp-content/uploads/2016/09/31-Low-Voltag… · Web viewDescribe...
Transcript of kasipkor.kzkasipkor.kz/wp-content/uploads/2016/09/31-Low-Voltag… · Web viewDescribe...
Ministry of Education and Science of the Republic of KazakhstanNon-commercial Joint-stock Company Holding «Kasipkor»
Specialty: Low Voltage Networks
Qualification: Electrician
Astana 2014
Content
1 Program outline 32 Study curriculum 63 Program Structure 114 Study programs (Content of units) 245 List of Literatures 73
2
1. PROGRAM OUTLINE
The following dual training program has been developed for speciality “Low Voltage Networks”. The curricula was developed following the „Learning field concept”1 (instead of discipline-divided curricula). The „Learning field concept“ is the basis for the structure of the German vocational training courses and offers best possibilities to realize principle of action oriented vocational education. It gives orientation for the didactical and organizing planning of lessons. Typical for the “Learning field concept” is that the content of lessons is related to typical professional actions and working situations. The professional work process is the starting point for the construction of “Learning fields”. Central theme of “Learning field concept” is the development of vocational competence in unity of professional competence, social competence and methodical competence. Because “Learning fields” are related to typical working situations, the learning process of trainees follows the logic of professional action, when skilled worker realizes a professional assignment. This completed action is following a sequence of events:
1. look for information2. plan 3. decide4. realize5. control6. assessment
Trainees get in lessons learning assignments, which require going all steps of a complete action independently. On this way trainees are able to realize the professional reality very complex and it becomes easier to transfer competences, developed at vocational school, into practice. The realization of these learning assignments makes necessary learning actions, which develop the formulated competences.
“Learning fields” are described in curriculum as thematic unities with competence oriented formulation of objectives, contents and time allowed.
The curricula for the School of Power Energy have 13 “Learning fields” for each profession. These are big unities with 40 to 80 hours. These big unities are divided for the educational process at school each into 3-5 Learning situations. There are three connected terms within of the “Learning field concept”:
Professional action fields Learning fields
1Hereinafter the term „learning field“ will be also rewritten synonymous with the terms „learn field“ or „LF“.
3
Learning situations
The connection between these terms:
For each Learning field were develop 3-5 Learning situations and defined the objectives, the necessary competences which the trainees need to be able to fulfill
demands in realization of a professional assignment, which learning actions are necessary to develop these competences.
The Learning fields are divided as follows:
Learning fields 1- 4: basicLearning fields 5- 9: sector specificLearning fields 10- 13: advanced specialisation
It is assumed to have foundation program in first semester of the first year in order to prepare students for specialization. The basic assumption for the formulation of foundation program is that it will be embedded into the following process of assessment of the trainees.
1. Assessment a. analyzing of school certificates, b. internet based test,c. assessment center
2. Content of assessment are agreed with social and international partners 3. Such applicants can become trainees who fulfill the criteria in minimum 4. The subjects of the foundation in the school of power engineering are:
4
Professional action fieldsare connected assignment complexes with typical professional situations and important situations of the life. Trainees should be able to manage these situations.
Learning fieldsare didactical founded and for the vocational school prepared professional action fields. They summarize complex assignments. Their treatment in the lessons takes places in action- oriented.Learning situations.
Learning situationsare smaller thematic unities as a part of a Learning field. They put the Learning fields in concrete terms and contain realistic professional assignments. This takes place by a team of teachers within a didactic reflection.
a. Mathematics, b. Informatics c. Physicsd. Technical English e. Sector relevant manual skills
5. At the beginning of the foundation individual learning plans must be formulated in agreement from school, social partners, international partners and trainees
6. This individual learning plans has to be evaluated monthly by the teachers in accordance to the trainee.
Goal of the foundation is to enable the trainees to fulfill the entry requirements of the training courses of the school of power engineering. This is demand for all new trainees.
These requirements are agreed between school management with the social and international partners.
Depending of the asked training it is necessary to pass a healthy test (color, geometric imagination, etc.) to fulfill the requirements of physical conditions.
For the training course of “Servicemen wind energy power plant” it is necessary that the trainee has to be physically fit (Assessment) and at least 4 hours per week to be trained during the training in climbing technics, lifting heavy loads, etc. additional to VET.
5
2. STUDY CURRICULUM
Standard duration of study: 2 years 10 months
Cycle: Basic
Lea
rn F
ield
(Mod
ule)
Study cycles and study disciplines (modules)
Forms of Control Volume of study time (hour, credit)
Exa
min
atio
n in
cla
ss
T Prod
uctio
n pl
ate
P
Num
ber
of q
uizz
es
Cou
rse
wor
k(pr
ojec
t)
Hou
rs in
tota
l
Num
ber
of c
redi
ts
Including:
Dis
trib
utio
n by
se
mes
ters
The
oret
ical
le
sson
s
Prac
tical
tr
aini
ng (l
ab-
prac
tical
wor
ks)
1 2 3 4 5 6 7 8 9 101 Analyze Electronic Systems
and Function Controlling2 2 2 2 290 116 174
1.1 T Identifying operating resources in a room, defining technical terms and allocating graphical symbols
8
1.1 P Health and safety at work (Workshop / laboratory / company) / environmental background / Technical Foundations (Technical drawing / workplace / tools)
14
1.2 T Acquiring preconditions/qualification for the use of electric energy
76
1.2 P Measuring procedures and equipment / Measurement and analyze of electric functions and systems
112
1.3.T Diagnostic Inspection and Troubleshooting
6
1.3.P Analyze electric circuits and check electric function / evaluate equipment and work
8
TIME OFFSET 26 402 Installing and Configuring
Electric Systems2 2 2 2 290 116 174
2.1.T Capture requirements of the customer order
2
2.1 P Research and obtain sources of information and information, conduct database, enquiries, evaluate information
6
6
2.2 T Acquire knowledge for the development of solutions
66
2.2 P Evaluate, use and draw up technical drawings and circuit documentation, prepare sketches
100
2.3 T Hand over customer system 18
2.3 P Present data, facts and circumstances and possible solutions
26
TIME OFFSET 30 423 Analyze and Adapt
Controlling Systems2 2 2 2 290 116 174
3.1 T Capture customer order 43.1.P Demonstrate possible
solutions, compare costs6
3.2 T Acquire knowledge for the development of solutions
78
3.2 P Plan and agree tasks within the team
116
3.3 T Implement customer order 83.3 P Assembly and disassembly of
sub-assemblies and modification of parts usingmechanical processing
14
3.4 T Hand over customer system 63.4 P Present data, facts and
circumstances and possible solutions
8
TIME OFFSET 20 304 Provide information
technology systems2 2 2 2 290 114 176
4.1 T Install, configure, and secure computer
10
4.1 P Installation andconfiguration of IT systems
14
4.2 T Hardware and software analysis and synthesis
12
4.2 P Analyze control circuits 184.3 T Working with user software 1 264.3 P Assessment of the safety
ofelectrical plants and operating equipment 1
40
4.4 T Working with user software 2 104.4.P Assessment of the safety
ofelectrical plants and operating equipment 2
16
4.5 T Working with CAD programs
24
4.5 P Assessment of the safety ofelectrical plants and operating CAD programs
42
TIME OFFSET 32 44Total: 1160 462 698
7
Learn Field 1 – 4Cycle: Sectoral
1 2 3 4 5 6 7 8 9 10
5 Ensure electricity supply and safety of equipment
2 2 2 2 270 106 164
5.1 T Capture, design, implement and hand over test order
40
5.1 P Assembly and connectionof electrical operatingequipment
60
5.2 T Capture and design customer order, implement and pass test order
30
5.2 P Select and prepare cables and connect sub-assemblies and equipment with different connection technologies
46
5.3.T Describe energy transfer from the power plant to the house connection and assign elements of the building's electrical supply
32
5.3.P Comply with electro technical rules when setting up, modifying, maintaining and operating electrical plants and operating equipment
48
TIME OFFSET 4 106 Analyze and verify
electric systems and electric equipment
2 2 2 2 240 96 144
6.1.T Perform flat installation 246.1.P Produce electrical
equipment or set up electrical plants, put equipment or plants into operation
36
6.2 T Protection measures in accordance with DIN VDE
58
6.2 P Measurement and analysisof electrical functions and systems
88
TIME OFFSET 14 207 Program and implement
control systems2 2 2 2 300 120 180
7.1 T Instruction in MFD (Multi-Functional Display) and its programming options
24
7.1 P Installation and configuration of IT systems
36
7.2 T Costumer order 1 – VPS (Virtual Private
24
8
Server)control device7.2 P Customer advice and care,
provision of services 136
7.3 T Costumer order 2 – EASY (Minor control device)
54
7.3 P Customer advice and care, provision of services 2
82
TIME OFFSET 18 268 Select and integrate gear
systems2 2 2 2 240 96 144
8.1 T Costumer order 1 –Select and check motors
74
8.1 P Installation, configuration and check of electric motors
112
TIME OFFSET 22 329 Plan and implement
communication systems in residential and commercial buildings
2 2 2 2 380 150 230
9.1.T Costumer order Antennas and broadband communication system
36
9.1 P Installation and configuration of Antennas and broadband communication systems
54
9.2 T Planning PBX (Private Branch Exchange) Telecommunications
40
9.2 P Installation and configuration of PBX Telecommunications
60
9.3 T EIB - European Installation Bus
36
9.3 P Installation and configuration of EIB
54
9.4 T Customer order - Alarm systems
16
9.4.P Calculation, Installation and configuration of Alarm systems
24
TIME OFFSET 22 38Total:Learn Field 5 – 9
1430 568 862
Cycle: Advanced
1 2 3 4 5 6 7 8 9 10
10 Take Electrical installations of building services in operation and maintain
2 2 2 2 360 144 216
10.1 T Customer order 1 - 44
9
Lighting10.1 P Assembly and connection
of electrical operatingequipment
64
10.2 T home appliances 5010.2 P Comply with electro
technical rules when setting up, modifying,maintaining and operating electrical plants and company equipment
76
10.3 T Costumer order 2 - Lightning protection
20
10.3 P Assessment of the safety ofelectrical plants andoperating equipment
30
TIME OFFSET 30 4611 Build energy
Equipment, operate and maintain
2 2 2 2 280 110 170
11.1 T Power generation and distribution
44
11.1 P Installing and putting electrical plants into operation
66
11.2 T Photovoltaic 4411.2 P Planning of photovoltaic
plants and systems66
11.3 T Visit Power Station 8TIME OFFSET 14 38
12 Plan and implement energy and building services
2 2 2 2 320 128 192
12.1 T Costumer order 1(residential building, house)
54
12.1 P Planning, installing and operating electrical plants for residential buildings
80
12.2 T Costumer order 2 (commercial section)
54
12.2.P Planning, installing and operating electrical plants for commercial section 1
80
TIME OFFSET 20 3213 Keep energy and
building services in state and adapt
2 2 2 2 250 100 150
13.1 T Customer order 3 (commercial section)
72
13.1 P Planning, installing and operating electrical plants for industrial buildings commercial section 2
108
TIME OFFSET 28 42
10
Total:Learn Field 10 – 13
1210
478 732
Sum of Learn Field 1 – 13
3800
1500 2300
3. PROGRAM STRUCTURE
Name of cycles and module Knowledge competences and skills formedCycle: BasicLearn Field 1: Analyze Competences
11
Electronic Systems and Function Controlling
To explain using an example the role of electricity To explain the structure of a simple circuit To explain the main items voltage, charge, electric current,
current density, resistance and electric conductance Explain the ways of voltage generation and the effects of
electric current To show the dangers of electric current To calculate the base items mainly related to Ohm’s law To describe the main types of resistance and their identification
Social and personal skills Clear tasks using mind-maps. Work with book of tables Usage of different learning techniques (like learning maps) Organize small tasks in team Train readiness for cooperation and self-reliance Present working results using correct terminology
Learn Field 2:Installing and Configuring Electric Systems
Competences To describe chosen parts of a customer’s order for
equipment installation in a specification To describe the attributes of TN-C-S-Systems and equipment
from house connection box to sub-distribution To determine necessary lines taking under account laying
procedure and room temperature To control fall of voltage by calculation To distinguish necessary forms of installation To create connection diagrams To create an offer based on a customer’s demand To instruct the customer about the installation.
Social and personal skills Define personal requirements to fulfill a customer order Train readiness to cooperate, self-dependence and goal-
oriented work Work with technical books and catalogues Develop a documentation (offer) for a customer order. Present results Evaluate the own working process by an evaluation form.
Learn Field 3:Analyze and Adapt Controlling Systems
Competences Determine for the control circuit of a customer order the
used construction elements and organize them according to the IPO-principle
Explain the difference between control and regulation Differentiate hard-wired and stored programmed controls Understand composition and functioning of used components
(amongst others protections) Distinguish control circuit and main circuit Realize basic set-ups of connector techniques and use the in
combined tasks (self stopping, sequential circuit, interlock circuit)
Use delayed action relays Explain important security functions (mechanical and
electrical interlock, closed circuit principle etc.) of gears Develop the logical main functions (AND, OR, NOT, NAND,
NOR) using digital connection technique and apply them in chosen situations
12
Change gears of contact techniques into digital technique Analyze the functions of simple digital connections
Social and personal skills Define personal requirements to fulfill a customer order Train readiness to cooperate, self-dependence and goal-
oriented work Obey norms, provisions and rules Organize the replication of customer control circuits in the
team Present results Evaluate the own working process by an evaluation form.
Learn Field 4:Provide information technology systems
Competences Explain main structure of a computer and show and name chosen
hardware components Install an operating system. Generate a specification Install standard software Create network connection. Describe structure of data networks Independently conduct program updates Secure data from computer to CD Explain main structure and sense of CAD-programs Create simple technical drawings increasingly independently
using CAD Plot an installation plan into a given footprint using CAD Create and judge a simple bill of materials for an installation
plan
Social and personal skills Look in a goal and solution oriented way for information in
the internet and apply it Interpret simple instructions in English Know the principles of power point and be able to apply it Be informed about legal provisions of data protection and of
copyright law Help each other in order to eliminate hardware and software
problemsCycle: SectoralLearn Field 5:Ensure electricity supply and safety of equipment
Competences Calculate using the physical properties of AC-technique Measure AC voltage using an oscilloscope Illustrate construction and mode of operation of inductivity In case of the connection in series of inductivity and ohmic
resistance to create the relationship of voltage, resistances and electric capacity and determine phase difference and frequency dependence
Illustrate composition and mode of functioning of a capacity Analyze the reaction of real inductor and real capacitor in AC
circuit Test inductor and capacitor by a self-developed circuit Describe the composition of a three phase AC system. Distinguish symmetric and asymmetric three-phase systems
and calculate line voltage and phase voltage and current and resulting capacity
Calculate conductor cross-section, connection for a chosen
13
three-phase system and choose the appropriate automatic cutout
Describe the composition and mode of operation of a one phase and three-phase transformer both idle and loaded
Specify important properties of a transformer and calculate the transformation ratio
Explain the main compounds, characteristics and provisions of electric installations in the direction of energy flow from transformer to user
Explain the meaning of the house connection and of different house connection systems
Name the means of production of the main power supply Measure trunk lines Describe installation and connection of meters, distinguish
metering systems and use their parameters for calculation of electric power and energy costs
Social and personal skills Define personal requirements to fulfill a customer order Train readiness to cooperate, self-dependence and goal-
oriented work Work independently with main provisions and norms and
follow them in the learning and working processes Design and organize the testing of chosen components and
equipment in the team Present work results and obey presentation rules. Evaluate the own working process by an evaluation form. Take over responsibility, based on professional knowledge
Learn Field 6:Analyze and verify electric systems and electric equipment
Competences Execute for the design of a housing space installation all
necessary steps Describe protection mechanisms according to the norms Apply protection measures for building and operation of
electric devices Explain the principle of protection by automatic deactivation
and name disconnecting time and conditions Explain the difference between maximumpermissiblevalue and
expected value for protective earthing conductor, isolation and internal resistance and loop impedance
Name composition and identification of grids and their specific features
Create an inspection protocol of the (first) inspection of stationary electric facilities and judge if the facilities can be brought into service
Social and personal skills Define personal requirements to fulfill a customer order Train readiness to cooperate, self-dependence and goal-
oriented work Obey norms, provisions and rules Organize the design of a network in the team Present results Evaluate the own working process by an evaluation form. Will be sensitized for the dangers of electricity
Learn Field 7:Program and implement control systems
Competences Name the application possibilities of MFD (multi-function
display)
14
Program a MFD via computer Name composition, mode of operation and characteristics of
the compounds that are used for a customer ordered circuit Program a control program Program simply program examples also using functional
modules Modify a control circuit according to customer specification Test a ready control circuit To connect a ready control circuit and eliminate flaws Connect a three phase asynchronous engine in star od delta
connection Describe the mode of operation of a the function of motor protecting switch or relay realize simple voltage and current measures at motors
Social and personal skills Define personal requirements to fulfill a customer order Train readiness to cooperate, self-dependence and goal-
oriented work Design and organize the modernization of a customer control
circuit as a team Look for information in the internet and can use it for problem
solving Can use manuals to solve professional problems Instruct clients into EASY-control
Learn Field 8:Select and integrate gear systems
Competences Explain the composition of a three-phase asynchronous and AC
engine Connect a three-phase asynchronous engine Operate a three-phase asynchronous engine, measure
characteristics and describe them Operate an AC motor as capacitor motor Decide if a three-phase asynchronous engine can be connected
to the grid in star or delta connection Distinguish calculating and operating parameters of motors To judge operating and protection mode for engines Interpretspecification plates of engines physically and calculate
degree of efficiency Conduct simple tests of electric machines Distinguish short-circuit and overload protection Describe composition and mode of operation of motor
protecting switch, motor protection relay and motor protector Consider commonalities and differences of three phase
asynchronous and AC engines choosing a propulsion system
Social and personal skills Work independently Obey norms, provisions and rules Use technical literature. Lead a conversation with a customer and introduce customer
into customer installationLearn Field 9:Plan and implement communication systems in residential and commercial buildings
Competences Name the composition of antenna installation Explain the functions of antennas Interpret the meaning of amplification and attenuation factor Measure the refractive index Describe the composition af an analog telephone
15
Describe application neutral wiring Connect analog telephones and program services Describe the principal functioning and connection of an
ISDN telephone Explain the advantages of digital telephones Describe the mode of operation of break-in and fire alarm
systems Name the compounds of alarm systems. To interconnect an alarm system Judge the proper functioning of an alarm system
Social and personal skills Work in groups and/or independently Judge their projects independently Able to look for information in the internet Able to use manuals also in English to solve professional
problems Develop strategies for fault correction Introduce clients into an installation and can respect customer
wishes Lead customer conversation
Cycle: AdvancedLearn Field 10:Take Electrical installations of building services in operation and maintain
Competences Design lighting equipment according to customer order Explain requirements to new lighting equipment Choose different illuminants according to the task Design lighting equipment also using computer programs Easy dimensioning of compensating capacitors Apply technical data sheets, specifications and manuals of
heating pumps Explain the customer advantages and disadvantages of household
appliances Explain information about contaminants in household appliances Judge external and internal lightning protection of a building
Social and personal skills Work independently Obey norms, provisions and rules Use technical literature and use information and communication
media Judge their own projects self-critically Conduct a sales conversation about household appliances Present a lighting equipment Conduct a technical conversation
Learn Field 11:Build energy Equipment, operate and maintain
Competences Describe structure of the electricity system in Kazakhstan Describe function and meaning of important switches in the
high voltage grid Describe several decentralize options of energy production and
their advantages and disadvantages Judge the meaning of uninterrupted power supply Judge the meaning of compensation
Social and personal skills Work independently Obey norms, provisions and rules Use technical literature and use information and communication
16
media Judge their project Present planning results
Learn Field 12:Plan and implement energy and building services
Competences Design installation and circuit diagrams according to customer
order Judge total capacity and power input Prepare the registration of the installation at the local network
operator Choose rated voltage and current of equipment according to
customer order and conditions of the building Plan material and time demand Determine internal resistance, loop impedance and voltage drop Choose appropriate protection measure Check protection measures and prepare testing documentation
Social and personal skills complex and independent work obey norms, provisions and rules Use technical literature and use information and communication
media Secure quality, especially of documentation Present planning results Conduct technical conversation about chosen technical aspects
of the equipmentLearn Field 13:Keep energy and building services in state and adapt
Competences Develop a strategy to adapt an existing electric device to
customer order Choose equipment according to customer order Test installation and prepare relevant documentation
Social and personal skills Work independently Obey norms, provisions and rules Use technical literature and use information and communication
media Secure quality Judge their project Conduct a conversation with the client especially regarding
changed installation (operation and safety aspects) Present planning results Analyze sources of errors Develop strategies for fault elimination
PracticeSkills to be developed over whole training period
VET, employment Explain the significance of the training contract, in particular conclusion, duration and termination
State mutual rights and responsibilities arising from the training contract
State opportunities for advanced vocational training State essential parts of the training contract
Structure and organizationof the company providing training
Explain structure and tasks of the company providing training Explain the basic functions of the company providing training,
such asprocurement, production, sales and administration State the relationships of the company providing training and its
staffto organizations of trade and industry, professional bodies and trade unions
17
Describe the basic principles, tasks and way of working of labour managementrelations or staff representative organs within the company providing training
Health and safety at work Ascertain health and safety risk in the workplace and adopt measures for the avoidance of this
Deploy occupationally related health and safety and accident prevention measures
Describe behaviours when accidents occur and institute initial measures
Comply with provisions and safety regulations when working on electrical plants, appliances and equipment
Deploy regulations for preventative fire protection; describe behaviors in the event of ire and initiate firefighting measures
Environmental protection Contribute to the avoidance of instances of environmental pollution caused by the company within the occupational sphere of influence, inparticular Explain possible instances of environmental pollution caused by
the company providing training and its contribution to environmental protection using examples
Deploy environmental protection regulations as these apply to the company providing training
Take opportunities to use energy and materials in an environmentally friendly manner
Avoid waste; make substances and materials available for environmentally friendly disposal
Company and technicalCommunication
Competences Research and obtain sources of information and information,
conduct databaseenquiries, evaluate information Evaluate, use and draw up technical drawings and circuit
documentation, preparesketches Evaluate and use documents and technical regulations and
occupationally relatedprovisions, including in English Manage, protect, secure and archive data and documents
Personal and social skills Conduct appropriate and target oriented discussions with line
managers, employees and within the team Present facts and circumstances, prepare protocols, use
Kazakh/Russian and English specialist terminology Compile and supplement documentation in Kazakh/Russian and
English, use standard software Organize and chair meetings, prepare decisions within the team,
minute results of discussions Present data, facts and circumstances and possible solutions Resolve disputes within the team Conduct written communication in Kazakh/Russian and English
Basic CycleMeasurement and analysisof electrical functions and systems
Competences Select measuring procedures and measuring equipment Measure, evaluate and calculate electrical values Check ratings and function of sub-assemblies Analyze control circuits Track signals and check these at interfaces Conduct systematic trouble shooting Check and set sensors and actuators Check and evaluate open and closed loop controls in respect of
18
function Check functionality of systems and components, interpret data
protocolsCompany and technicalCommunication
Competences Research and procure sources of information and information,
conduct database enquiries, evaluate information Evaluate, use and draw up technical drawings and circuit
documentation, prepare sketches Evaluate and use documents and technical regulations and
occupationally related provisions, including in English Manage, protect, secure and archive data and documents
Planning and organizationof work, evaluation of work results
Competences Set up workplace or assembly location according due
consideration to operational stipulations Ascertain and select tools and materials for the work process,
request,test, transport, store and make these available for use in a timely manner
Plan work processes and partial tasks in compliance with statutory, economic and schedule stipulations, set priorities in the event of deviations from planning
Set up computer workplace in accordance with ergonomic aspects, set up graphical user interfaces
Assembly and connectionof electrical operating equipment
Competences Assembly and disassembly of sub-assemblies and modification
of parts using mechanical processing Select and prepare cables and connect sub-assemblies and
devices with different connection technologies Stipulate cabling routes and locations for the assembly of
equipment according due consideration to environmental conditions
Select and assemble company equipment and cabling routing systems
Install cabling Produce electrical equipment or set up electrical plants, put
equipment or plants into operationMeasurement and analysisof electrical functions and systems
Competences Select measuring procedures and measuring equipment Measure, evaluate and calculate electrical values Check ratings and function of sub-assemblies Analyze control circuits Track signals and check these at interfaces Conduct systematic trouble shooting
Assessment of the safety of electrical plants and operating equipment
Competences Assess basic protection measures against electrical shock Assess cables and other company equipment and the protective
measures applied to these, in particular in respect of ampacityInstalling and puttingelectrical plants into operation
Competences Select, assemble and disassemble ladders, scaffolding and
installation platforms Check suitability of the subsurface for mounting, prepare
anchoring and load bearing constructions and fix consoles Install, wire up and label control units Install, wire up and label operating equipment for open and
closed loop control, measuring and checkingTechnical analysis oforders, developing solutions
Competences Select measuring, open and closed loop control systems,
sensors, actuators, software and other components
19
Installation andconfiguration of IT systems
Competences Select hardware and software components, install and configure
these Install and configure operating systems and applications Integrate IT systems into networks Deploy tools and test programs
Cycle: SectoralAssembly and connectionof electrical operating equipment
Competences Comply with electro technical rules when setting up, modifying,
maintaining and operating electrical plants and company equipment
Avoid waste, evaluate waste materials, unused operating materials and components for disposal, store these in an environmentally appropriate manner and prepare for disposal
Assessment of the safety ofelectrical plants andoperating equipment
Competences Check and assess the function of protection and potential
equalizers Measure and assess insulating resistances Assess the types of protection applied to electrical devices or
plants in respect of environmental conditions and additional stipulations for special types of premises
Assess risks arising from the operation of electrical devices, company equipment and plants and ensure safe use via instigation of protective measures
Assess the effectiveness of measures to counter electrical shock when errors arise, in particular occasioned by the switching off of over current protection devices and residual current protection devices
Assess the electrical safety of portable company equipment Assess fire protection regulations when setting up and operating
electrical equipment and plantsTechnical analysis oforders, developing solutions
Competences Stipulate modifications and extensions to plants, electrical
circuits andprotective measures, select components and cables Check order documentation and compare with local conditions,
stipulate delineation of on-site services Select measuring, open and closed loop control systems,
sensors, actuators, software and other componentsInstalling and puttingelectrical plants into operation
Competences Adjust, fix and connect machines, equipment, drive systems and
otheroperating equipment Assemble and erect plug-in modules, housings and control unit
combinations Install, wire up and label operating equipment for open and
closed loop control, measuring and checking Connect components using pipe and hose links Put main and auxiliary current circuits into operation Mount protective systems, cladding and insulation Adjust and connect energy technology links and cables Create earthing and potential equalizer, measure and assess
earthing and loop impedance Put main and auxiliary current circuits into operation Parameterize and put drive systems into operation, adjust ratings Check non-electrical components of plants, in particular
pneumatic sub-assemblies Adjust protective systems and check the effectiveness of these,
ensure the effectiveness of safety measures
20
Check emergency shut down and alarm systems and mechanical safety systems
Company and technicalCommunication
Social and personal skills: Present facts and circumstances, prepare reports, use
Kazakh/Russian andEnglish specialist terminology Compile and supplement documentation in Kazakh/Russian and
English, use standard software Present data, facts and circumstances and possible solutions
Measurement and analysisof electrical functions and systems
Competences Check and set sensors and actuators Check and evaluate open and closed loop controls in respect of
functionCustomer advice and care,provision of services
Competences Determine wishes and requirements of internal or external
customers, develop possible solutions and alternative forms of implementation
Record fault reportsMaintenance of plants and systems
Competences Plan maintenance and inspection measures Inspect systems, check function of plants and safety systems and
protocol checks Maintain systems in accordance with maintenance and repair
plans, exchange wearing parts as part of preventative maintenance
Maintain and repair processing machines When putting back into operation equipment or parts of plants
which have been the object of maintenance, adjust protective measures and safety systems and check the effectiveness of these
Planning and organizationof work, evaluation of work results
Competences Conduct calculations in accordance with company stipulations Demonstrate possible solutions, compare costs Check order documentation and technical feasibility of the order
and coordinate with company capacities Record and evaluate data relevant to business administration
Configuration andprogramming of controls
Competences Adjust, modify and put into operation the hardware and
software used for measurement and control technology sub-assemblies
Install and configure applications software Analyze, adjust and modify control programs Check functional processes and modify program processes Install storage media and programs to secure data
Maintenance of plants and systems
Competences Compare systems parameters with stipulated values and adjust
Technical service and operation Competences Operate and adjust visualization applications of technical plants
Cycle: AdvancedCompany and technicalcommunication
Competences Evaluate and use documents and technical regulations and
occupationally related provisions, including in English Conduct appropriate and target oriented discussions with line
managers, employees and within the team Organize and chair meetings, prepare decisions within the team,
minute results of discussions Resolve disputes within the team Conduct written communication in Kazakh/Russian and English
21
Planning and organizationof work, evaluation of work results
Competences Plan and agree tasks within the team, accord consideration to
cultural identities Deploy IT systems to plan and execute orders and track
schedules Recognize and deploy influences with the work situation, the
workingenvironment and working behaviors within the team which lead to an increase in quality in work results
Compare internal and external provision of services Ascertain skills gaps, use training opportunities and various
learning techniquesMeasurement and analysisof electrical functions and systems
Competences Check functionality of systems and components, interpret data
protocolsCustomer advice and care,provision of services
Competences Indicate maintenance works and intervals Agree details of the processing of the order, in the event of
faults in processing of the order indicate alternative solutions Explain performance characteristics, provide instruction in
operation, indicate risks, safety rules and regulations Provide technical support Organize exchange of information with the customers
Technical analysis oforders, developing solutions
Competences Analyze customer requirements Assess existing plants included in company equipment Plan modifications to plants according due consideration to
company processes of the customer Document services to be provided, modify circuit
documentationInstalling and puttingelectrical plants into operation
Competences Select and deploy lifting equipment, fittings and transport,
secure and execute transport Assemble data links Process communication technology cables using various
connecting technologies Install, check and put into operation signal and data
transmission systems Mount and assemble lighting systems Check compliance with measures relating to electromagnetic
compatibility Draw up test protocols, draw up and adapt documentation, hand
over plants or systemConfiguration andprogramming of controls
Competences Adjust architectures, protocols and interfaces of automation
devices to networks and bus systemsMaintenance of plants and systems
Competences Use diagnostic systems, check function of sub-assemblies,
replacedefective sub-assemblies Maintain and repair decentralized energy supply systems Assess, maintain and repair energy distribution systems Maintain and repair communication plants Document maintenance measures
Technical service and operation Competences Provide and execute service Comply with company stipulations when drawing up offers
andestimates Make customers aware of guarantee claims and provide advice
22
ontechnical and economic feasibility Hand over plants, provide customers with initial instructions on
how to operate technical systems Document services provided Monitor technical plants Conduct remote diagnosis and maintenance Evaluate plant, diagnostic and process data and use this for
purposes of optimization Record consumption data of energy and operating equipment,
establish reasons for deviations from reference value, optimize consumption
Business processes andquality management withinthe area of deployment
Competences Make customers aware of and provide advice on specific offers,
accept orders Obtain and evaluate information, use and process
documentation, ascertain technological developments, accord due consideration to documentation relating to safety
Analyze starting position, clarify technical and organizational interfaces, document interfaces, stipulate order objectives, define subtasks, draw up technical documentation and take part in cost planning
Obtain, check and evaluate offers and estimates according due consideration to company stipulations
Plan order processing and coordinate this with upstream and downstream areas, draw up planning documentation
Arrange for, monitor and check services from third parties Process orders, in particular according consideration to health
and safety and environmental protection, monitor observance of schedules
Select checking methods and test equipment, ascertain utilisability of test equipment, use inspection plans and company testing procedures
Comply with standards and specifications in respect of quality and safety of the products and safety of the order processing, use quality assurance systems, search for, resolve and document causes of errors and quality defects in a systematic manner
Document the project process, charge for services, draw up charge data, conduct subsequent calculations
Authorize technical systems for use, hand technical systems over, prepare acceptance protocols, explain products and services
Conduct target-performance comparison with planning data, evaluate work results and implementation of work
Make a contribution to continuous improvement of work processes both within company operations and within own work area
23
4. STUDY PROGRAMS
Overview:
The study program proposes specific learning situations, learning actions and methodologies for teaching, learning and testing/examining. It indicates the hours to be allocated to each learning situation. The learning content covers the following aspects: • Company structures, organization of work, communication in the company• Products, services
Circuit diagram, graphical symbols• Electrical equipment, basic circuits, electrical base items• Behavior and key indicators of components and functions• Hazards and risks of electric power, safety rules, work safety, environmental
protection and energy conservation• Measuring procedures, performance testing, failure analysis and correction• Team work • Methods of information gathering and processing
Cycle: Basic
Learn Field 1 – Analyze Electronic Systems and Function Controlling
Objectives:
24
Trainees inform themselves on tasks, actions and typical working procedures of their profession.
Traineesanalyze electrical systems on the level of facilities, devices, component and single parts as well as interdependencies of these levels. In doing so, they read and establish technical documentation. They determine the functions and the operating performance of selected components and parts and their tasks in electrical systems. The trainees gather and analyze information on their own. They analyze technical documents in English language with the help of auxiliary resources.
The trainees determine, document and evaluate electrical variables by calculation and technical measurement as basis for the analysis and testing of basic circuits and for the identification of general principles of electrical engineering.
The trainees test the functions of electrical circuits and operating resources. They analyze and correct failures.
The traineesrealize tasks in team and communicate in correct technical language and terminology. They apply methods for planning their work, time and learning. They act responsible with consideration of safety related aspects.
Contents:
Operational structures, work organization, company communications Products, services wiring diagrams, circuit symbols Electrical equipment, basic circuits, basic electrical properties Behavior and characteristics of exemplary components and functional units Danger of electric current safety regulations, occupational health and safety Measurement method, functional testing, troubleshooting Teamwork Methods of information gathering and processing
Educational objectives:
Professional competences
The trainees will be able to… rename an example of the importance of electrical energy. illustrate how to build a simple circuit. describethe fundamental quantities voltage, charge, electric current, current
density, ohmic resistance and conductance. name the types of voltage generation, and the effects of the electrical
current. Show the dangers of electric current.
25
calculate the basic quantities, especially in connection with the Ohm's law. describe the different types of resistors and their markings. assign to hand nameplates the performance data of electrical equipment. perform calculations of work, power and efficiency to perform. allocate the electrical parameters such as voltage, current and power
measurement. explain the laws of series and parallel connection of ohmic resistance and
apply them to mixed resistive circuits. determine the electrical behavior of loaded voltage sources in terms of
internal and external (load) resistance. identify sources of errors / faults in selected practical examples of mixed
resistive circuits and fix them.
Priorities for social and personal competences
The trainees… clarify tasks with the help of mind maps. work with the tables and technical information book. use a variety of learning techniques (eg flashcards). design and organize small work orders in the team. train cooperation, independence and work purposefully. present the results of their work, taking into account the correct terminology.
Learning situation Learning action Hours116
Proposed methodologies
1.1Identifying operating resources in a room, defining technical terms and allocating graphical symbols
Defining the meaning/relevance of electric energy
Application of measurement units Application of technical language
and terms
8 Project descriptionMind-MapTeacher-Student-Conversation
1.2Acquiring preconditions/qualification for the use of electric energy
Explaining/ illustrating a simple electric circuit
Explaining base items U, Q, I, J, R, G studying types of voltage
generation studying actions of electric
energy defining of electric hazards
from characteristic curves
Computing/ calculating with base items
Measuring base items Studying the Ohm’s law Explaining types of resistances
Analyzing type plates
76 Teacher presentationWorking tasks
Introducing learning cardsCreative word association for consolidation / working with school and table bookTeacher-Student-ConversationExperimentInterpreting characteristic curves
Transposing equationsTeacher presentation / Calculation tasksLaboratory tutorial
26
Explaining electric demand and energy
Test/ Examination
Defining energy efficiency Measuring electric demand Studying principles of a series
connection
Studying principles of a parallel connection
Applying principles
Defining behavior of voltage sources Ri and Ra
Ri< Ra
Ri = Ra
Ri> Ra
Calculating hybrid circuits
Laboratory / calculation tasksHome work / Teacher-Student-Conversation / Laboratory tutorialHome work / Teacher-Student-ConversationLaboratory / calculation tasksTest / Examination
Test preparation
Teacher presentation / Calculation tasksLaboratory tutorialLaboratory / calculation tasks / teacher presentationLaboratory / calculation tasks / teacher presentation
Introducing team work(4 spots at 12 V circuit)Team work
Teacher presentation / Calculation Tasks / Laboratory tutorial
1.3Analyzing and correcting failures
Calculating basic circuits Identifying and explaining failures
Determining requirements of the customer conversation
Leading a customer conversation
6 Calculation task → 7-Stroke-CircuitCustomer order: defect heating plate
Presenting results of failure analysisControlling
TIME OFFSET 26
Learn Field 2 – Planning and implementing electrical installations
Objectives:
Trainees analyses orders for the installation of energy supply systems, facilities and devices.
Trainees plan installations with consideration of typical grid systems and required safety and protection measures. They develop circuit and
27
installations plans by manual drawing as well as with the help of computer programs. They measure the components and select them with respect to functional, economic, ecologic aspects.
The trainees apply technical terms and language of electrical engineering. They evaluate information in English technical language appropriately.
The trainees plan typical installation procedures for electrical facilities. In doing so, they determine the procedure for order completion, material disposition and coordination with other parties. They select working means and tools and coordinate the procedure of work. They determine the cost of installation, compile offers and present them to the customers.
The trainees install facilities. In doing so, they ensure compliance with applicable accident prevention and safety regulations for the work in, at and with electrical facilities. They identify potential risks and hazards or electrical power, comply with applicable safety regulations and implement required protective measures.
The trainees set facilities into operation, record operating parameters and compile respective documentation. They test the facilities’ functions, analyse and correct failures. They turn the facilities to the customers, demonstrate their function and instruct the customers on their use.
Trainees assess their working results as basis for an optimization of organization of work. They compile invoices for processed orders.
Contents:
Job planning, order realization Energy requirements of a system or a device Safety regulations Installation Technology Equipment Specifications Types of circuit diagram Line sizing Work organization Costing, quoting,
Educational objectives:
Professional competences
The trainees will be able to… detect selected components of a customer order to the final installation in the
specifications. describe the characteristics of the TN-CS system and the resources from the
service box to the lower distribution. determine the lines to be used in consideration of installation and the room
temperature and select the required line protection switch.
28
check the voltage drop across the line by an invoice. distinguish needed for the wiring installation forms and determine the
allowance. create diagrams for education, series, change, savings switch, intermediate-,
impulse and staircase lighting circuits, this build up and eliminate errors. create a sales order for an offer (technical specifications only with material
costs). inform the customer in the system.
Priorities for social and personal competences
The trainees… identify the personal requirements to fulfill the sales order. train cooperation, independence and work purposefully. work with textbooks and catalogs. develop a documentation (offer) for a sales team. present the results of their work. assess their work process using a score sheet.
Learning situation Learning action Hours116
Proposed methodologies
2.1Determining the requirements of a customer order
Registering selected elements of the customer order in the customer functional specifications list
2 Mind-MapTeam work
2.2Acquiring knowledge and skills for the development of the solutions
Characterizing operation resources for energy supply
Characterizing the TN-C-S-system
Specifying selection criteria for electric lines
Calculation of lines (select overcurrent protection equipment LS)
Specifying transmission types Describing differences of
installation methods
Selecting different installation methods for given purposes
Differentiating circuit plans
Test
Executing installation circuits: Switch-off connection Series connection Two-way connection
66 Group work
Working with school and table book
Home work: calculation of lines
Exercise: determining installation measures
Learning cards: characteristics of circuit plans
Laboratory/ partner workSwitch-off connection as
29
Written examination
Two-way economic connection / circuit
Cross connection
Specifying principles of electrical magnetism
Perform impulse circuit (L- and N-controlled)
Implementing time controlled circuit for lighting stair cases
Written examination
individual work
Teacher-Student-Conversation / Demo/ Exercise
Home work: impulse circuit connecting
2.3Handing facility to customer
Establishing a functional specifications list Calculating material costs Compiling an offer (only
material cost) Compiling order
documentation Customer instruction Presentation of results
Assessment:Documentation and presentation
18 Customer order/ Sub-projects
Folder control
Time Offset 30
Learn Field 3 Analyzing and adapting of controls
Objectives:
The trainees plan changes and adaptions of controls in allowance The trainees analyze the equipment and the structural installation. They
determine controls and differ in processes of controls and regulations. The trainees differ in technics to realize the controls and they evaluate the pros
and cons as well with ecological and economical aspects. The trainees change controls and vote the assembly group and whose
components depending on their exigencies. They take the controlled systems in operation, check the functionality, take performance data by measurement and make necessary adjustments. They document the technical changes while using the standard and custom-designed software.
The trainees organize their learn tasks and work tasks self-contained and in a team. They analyze, reflect and evaluate the new knowledge. They dispose English documentations with additives and dispose as well English technical
30
terms to write recorded representations of the circumstances of the control engineering.
Contents:
Block diagram, IPO-principle, sensors, actuators, interfaces Functional chain, functional descriptions connecting and signal processing stored-program Basic logic operations, memory functions Standards, regulations and rules Technical documentation Basic logic operations, memory functions
Educational objectives:
Professional competences
The trainees will be able to …
determine the controls of an client and order them with the IPO-principles. illustrate the principle difference between control and regulate. differ of connecting or stored-programed controls. Determine the structure and function of the elements of the client controls. differ in control or main circuit. design basic set-ups of the contactor control circuit and dispose combined tasks. dispose a marginal relay in a contactor control circuit explain important safety functions of controls. develop logical basic functions with digital connecting technics and use them
on controls. convert controls of contact technics in digital connecting technics. analyze basic digital connecting set-ups of their function. assign the self-retention of a contactor, a RS storage elements, a digital
interconnection technique. Copy the control set-ups of the clients in the contactor-based control technology
and digital connecting technics and to prove the functions and correct mistakes. adapt the client set-up to basic specific changes of the clients.
Priorities for social and personal competences
The trainees…
determine the personal requirements to come up to the clients. train to cooperate, self-contained and precise working. respect standards, regulations and rules design and organize the replicas of the client controls in a team.
31
evaluate their work process with help of an evaluations script. present the results of their work
Material /time plan
Learning situation Learning action Hours
116
Proposed methodologies
3.1
Determining the requirements of a customer order
Analyze customer orders
Describe personal requirements for the realization of a customer order
4 Project description (e.g. controls of traffic lights etc.)
Mind-Map
Teacher-Student-Conversation
32
3.2
Acquiring knowledge and skills for the development of solutions
Assign components of customer facilities according to EVA-principles
Illustrate basic -differences between controlling and regulating
Distinguish technical execution of controls
VPS (contactors, digital interconnection)
SPS (EASY)
Capture functions of elements (inter alia contactors)
Name sensors and actuators
Examine and use functions of controls
inching mode
self-holding circuit
sequential circuit
latch
time relay
Explain safety functions of controls
mechanical and electrical interlocking of contactors
closed-circuit principle,
Test/ Examination
78 Work task
Partner/team work
Text book on technical qualification
Information for Teachers
Work task
Entry level: sensors
Exit level: actuators
Laboratory tutorial on controls
Team work
Partner work
link to mechatronics Automationlatches
Norms, instructions and rules for controls
Practice-oriented examples of use
33
Acquire functions of elements for digital controls
Deduce basic logical functions (AND, OR, NOT, NAND, NOR)
Convert contactor-based control technology into digital interconnection technique
Analyze and develop simple applications
Illustrate RS storage elements
Test/ Examination
Digital lab practice:
Experiment 1: basic interconnection
Experiment 2:Implementation of contact switches
Experiment 3:Analysis of combinatorial circuits
Experiment 4:Synthesis of combinatorial circuits
Experiment 5: Introduction digital storage
Experiment 1,2 and 5 have to be conducted!
3.3
Processing customer orders
Design a customer order in contactor-based control technology and in digital interconnection technique
Built controls according to a customer order
Check functions
Search for and correct errors
Evaluation: circuit arrangement
8 Partner/team work
Controls of traffic lights, pumps, conveyor belt systems, and so on
Power supply link tospecialization Mechatronicsbolting devices
3.4
Handing facility to customer
Make a documentation Leading a customer
conversation
Evaluation:documentation, presentation
6 Team work
Time Offset 20 h
34
Learn Field4 Provide information technology systems
Objectives:
The trainees plan the allocation and expansion of information technical systems with a brochure.
They analyze systems; prove the technical and economy practicability of the orders and to offer solutions.
They research media of networks in English and other relevant languages. The trainees choose hard- and software components with function,
performance, application compatibility, economy and environmental compatibility and to purchase them.
The trainees install and configure information technical systems and software and dispose them.
They integrate information technical systems in networks and dispose them in configurations.
The trainees consider statutory requirements of the privacy. They use specific arrangements for privacy The trainees document and present their work and results. They use software
to write the texts, make tables, graphic designs and presentations.
Contents:
Function and structure of the brochures Hardware, business system, basic and specific software Purchase process, Installation and configuration process of hard- and software components Ergonomic workplaces Tools and methods for diagnosis and error removal Local and global networks, protocols of data transfers Security and safety of data, media low Technics and methods of presentations
Educational objectives :
Professional competencesThe trainees will be able to … show the basic structure of computers and specific hardware components install business systems make a brochure of duty install basic software with regulations make a network connection
35
specify the structure and data networks arrange updates of programs self-contained save computer data of cd explain basis structure and meaning of CAD programs create simple designs of technic with CAD program self-contained plot an installation plan in a horizontal plan with CAD program make and evaluate a simple material list of an installation plan
Priorities for social and personal competences
The trainees… are able to search and apply information in the internet purposeful are able to apply manuals in basic English know design principles of PowerPoint presentations and can use them are informed of the laws of privacy of data help each other to remedy problems of hard- and software
Material /time plan:
Learning situation Learning action Hours 114 Proposed methodologies
4.1Assignment 1Install, configure a computer and data-backup
Set up of computer according to given requirements and functional specification
10 Formatting and new installation of a PC according to assignment 1 (A1)
4.1.1Introduction
Getting to know the room Grouping
technical room equipment, network, room regulations signatures
4.1.2Install an operating system
Trainees are able to install an operating system according to given requirements
Partner workWindows-CD
4.1.3Establish a network connection
Trainees can configure and establish a network connection
Net gear-WLAN set up,set up of a Windows network,assignment of addresses according to A1
4.1.4Install software applications
Trainees can install software applications according to given requirements
Trainees learn how to update software
Programs of a DVDMS-Office, Multisim, Designer, AutoCAD, Mediator, AReader, Nero, antivirus software
4.1.5Data backup
Trainees can generate a backup of programs and date of a computer
Generating an image of a C-partition on a hard drive and a DVD
36
4.1.6Multiple-choice questions
Answering questions on computer, internet and network technique
Exercise sheet, using the internet
4.2.Assignment 2Analysis and synthesisof hardware and software
Getting to know gateways and hardware components
Selection of standard software Realizing a customer order
12 functional specification according to A2
4.2.1Analysis of PC-Hardware
Getting to know the most important hardware components of a PC
Trainees can use Windows or other software tools to analyze hardware
Use of: Server files with
excel sheets Internet tools (Sandra
06, Aida 32, Everest home)
4.2.2PC-gateways
Trainees can recognize and functionally assign computer gateways
Use of: Server files with
excel sheets PPT presentation and
book4.2.3Customer order
Trainees can set up a computer according to a customer order
Working with Word files, internet research on choice of hard- and software
4.2.4Test/ Examination
Hardware upgrade according to functional specifications
Task assignment, use of the internet
4.3Assignment 3Work with software applications 1
Operating a simulation software for the composition and the test of electric circuits
Analysis and charting with MS Excel or other programs
26 PC analysis and evaluation of basic setups: potential divider basic circuits resistance networksaccording to A3, 4 und 5
4.3.1Efficient usage of specific software applications
Composition of electric with the simulation software Multisim
Gathering electrical parameters Analysis and charting with
Excel
Properties of a charged and uncharged potential divider (A3),Teacher presentation with projector
4.3.2Usage of specific software applications
Usage of simulation software Generating tables and charting
with Excel Generating tables in MS Word
A4 and 5 (fundamental circuits and resistance networks)
4.3.3Test/ Examination
Trainees present graphically a AP-adjusting according to given parameters
Working with Excel
Test task assignment
4.4Assignment 4Work with software applications 2
Presenting technical equipment (properties, handling),
Presenting solutions while analyzing electrical circuits
Getting to know and efficient usage of the presentation software Power Point
Translation of English texts
10 Presentation of a measuring device
Presentation of calculations of parameters of an electrical circuit
4.4.1Basics
Make a PPT presentation, basics Teacher presentation, book, information sheetIllustrating properties of
37
a good and poor presentation (pointing out possible mistakes)
4.4.2Instruction manual measurement device
Work with an instruction manual of a measurement device in English language
Trainees are able to translate a instruction manual
Internet or dictionaries or glossary
4.4.3Generate a PPT presentation
Trainees generate self-dependently a presentation on the usage of the measurement device for informing a customer
Partner work
4.4.4Presentation
Trainees groups instruct a customer in the use of a measurement device using PPT and the device
Presentation
4.4.5Generate a PPT presentation
Trainees generate self-dependently a presentation to be able to present e.g. solutions for calculating a resistance network within the framework of a skill enhancement program
Partner workA9
4.4.6Presentation
Presenting a activity-oriented presentation
Presentation
4.5.Working with CAD-programs
Solving a project following a task description (functional specification ) using CAD-programs
Getting to know CAD-programs Application of CAD-programs
24AutoCad LT respectivelyElektro-CAD xx
4.5.1Getting to know the programs
Trainees become informed in the general use of CAD programs
Trainees are introduced to basic functions of the handling of the program
Teacher presentation, projector Overview programsLearning to use the help functionBasics of CAD
4.5.2Drawing exercises step 1
Trainees generate a basic drawing with support of the teacher
Simultaneous processing of drawing stepsFramework and technical drawing
4.5.3Drawing exercises step 2
Trainees generate a basic drawing with little or no support of the teacher
Trainees can help each other,Framework for technical drawing is given
4.5.4Generate an installation plan according to customer requirements
Generating an installation plan of an installation circuit
Assignment of equipment to symbols
Experimenting with building circuits in the laboratory
Generating a simple bill of materials
Individual work,Framework is givencollaboration with teacher
Time offset 32Cycle: Sectoral
Learn Field 5 Ensure electricity supply and safety of equipment
38
Objectives: The trainees plan the electrical power supply of equipment. They analyze and
classify methods of the electrical power supply of functionality, economic and ecological aspects
The trainees dimension equipment taking into account of network systems and safety. They chose the components of the equipment, create circuit diagrams and make plans of safety with literature, as well as in English
The trainees control the electrical power supply at installation, start up and maintenance and at equipment the regulation of rules to protect against an electric shock for the labor and to provide accidents.
The trainees test electrical equipment and take them operational. They make a protocol about the business test results and order them in documentations.
The trainees instruct the users in using the factory
Contents: Switch and distribution equipment Environmental safety Voltage levels AC and three-phase systems Power systems Protective devices Measuring and test equipment Tests Degrees of protection, insulation classes Degrees of protection User training
Educational objectives:
Professional competencesThe trainees will be able to … calculate the AC technology with parameter. measure AC voltages with oscilloscope. show the structure and operation of inductance. produce the inductance at a series connection and produce with an ohmic
resistance relations of the voltages of the resistors and the benefits and determine the phase shift angle and frequency dependence.
show the structure and operation of a capacity. produce the voltages, resistors and power in a series connection with an
ohmic resistance and determine the phase shift angle and frequency dependence.
evaluate the behavior or real coils and real capacitors in an AC circuit. prove a coil and a capacitor with self-designed circuit. describe the structure and three-phase alternating current system.
39
differ in loaded symmetric and unsymmetrical three-phase systems and three-phase appliance and calculate the conductor or currents and phase voltages and power.
identify connection way, conductor cross-section of a specific tree-phase device and chose the right circuit breaker.
describe the structure and operation of one- and three- phase transformers loaded and unloaded.
give important characteristic variables of the transformers and calculate rations.
define the basic components, characteristics and regulations of electrical equipment in the direction of the electric power of the transformers.
show the importance of the house connection and different house connection systems.
know the resources of the main power supply. carry out the measurements of the main power supply. describe the installation and connection of counters, differ the counters and
supply their characteristic variables of the measurements of electric power and energy costs.
describe the tasks of the main potential equalization system and use the regulations of the installation.
Priorities for social and personal competencesThe trainees… identify the requirements to make the client order. train a cooperation, independence and purposeful work work independent with important regulations and standards and note them
during learn- and work processes. design and organize the examination of specific components and equipment
in a team. present their results of the work and respect the rules of presentations. evaluate the results of their work process, e.g. with the help of their
assessment bow take responsibility based of knowledge for their daily work
Material / time plan:
Learning situation Learning action Hours106
Proposed methodologies
5.15.1.1Assessing an inspection job
Assessing the inspection job Describe personal
requirements for the implementation
40 Project description (e.g. LL-lamp), demonstrationMind mapTeacher-student dialogues
5.1.2 Name components Team work
40
Acquire knowledge for the development of proposals of solution
Draw a circuit diagram Parameters of alternating
current technique measuring with an
oscilloscope
Working with inductivity inductor composition induction process, self-
inductivity, Lenz’ rule Working with series
connection of inductivity and ohmic resistance active(wire) resistance apparent resistance
(impedance) inductive reactance
(frequency dependency) phase displacement resistance triangle triangle of tension triangle of power power factor (cos φ, α)
Working with capacities capacitor construction charge and discharge
behaviour Working with series
connection of capacity and ohmic resistance active(wire) resistance apparent resistance
(impedance) capacitive reactance
(frequency dependency) phase displacement resistance triangle triangle of tension triangle of power
Evaluate the comparison of a real coil and real condenser focus: power conclusions
outlook: reactive current compensation
Test/examination
TextbookWork task
Laboratory exercises
Teacher informationTeam workLaboratory exercisesTextbookWork task
Group work/experiment RL-series connection
Test
Teacher informationLaboratory exercisesTeam workTextbookExercises
Team workText bookPossibly laboratory exercises
5.1.3Conduct the inspection job
Design the inspection protocol
Check components
Team workConduction of inspection in the laboratory
5.1.4Handing over the inspection protocol
Complete inspection protocol Discussion of resultsEvaluation: Presentation, documentation
Team work
5.25.2.1
Analyze an installation circuit (A-C power connection) and
30 Project description (connection of an electric stove)
41
Assessing a customer order
a stove wiring diagram Highlight the necessity of
a A-C power connection Describe requirements for the
implementationMind-MapTeacher-student dialogues
5.2.2Acquire knowledge for the development of proposals of solution
Describe the composition of three-phase alternating current standardized labelling line and phase voltage,
phase displacement, chaining factor
Connectors, stove connectors
Working with symmetrical a A-C power systems with star and triangular loads Linkage of line and phase
voltage and currents three-phase power
Working with asymmetric three-phase systems Calculations in the case of
line and phase breakdown Solving graphically
asymmetric loads Arm shaft problems (high
neutral current despite symmetric load)
Safety aspects Determination of the
connection diagram Determination of the
cable cross-section
Choice of overcurrent protection measures
Test/examination
Work taskTeam workTextbook
Teacher information
Laboratory exercises
Exercise
Teacher information
Laboratory exercisesExercise
Demonstration (compact fluorescent lamp)
Work tasksText and table book
5.2.3Conduct the inspection job
Create a connection circuit for test order
Determine the wiring diagram, cable cross-section, overcurrent protection measures
Team work
5.2.4Handing over the inspection protocol
Complete inspection protocol with written justification of results for documentation
Evaluation:Presentation, documentation
Team work
5.35.3.1Describe the energy transfer from power
Explain the composition and mode of functioning of one-phase and rotary current
32Teacher-student dialoguesCollege-input, work task
42
plant to the building connection
transformers Gear transmission ratio
(no calculation for the RT transformer)
Properties (also under load, no connection symbols)
Differentiate voltage levels5.3.2Assign elements of the electric supply of buildings
Describe the meaning and execution of house connections and different house connection systems (house connection room, wall, alcoves) handling, planning,
registration, position, house connection room
(function, minimum dimension, components)
house connection box (installation sizes, components, NH-fuse elements, protection category)
nominal voltage, network system
Teacher information, facility visit HMS
Work taskPartner/ team workTextbook
Norms, regulations
Explain the installation of the main distribution construction forms, sizes
of distribution boxes, protection category
main signaling system network system (TN-C
TN-S), wires (minimum power load)
EMV (especially PEN load)
Perform dimensioning of main wires (power requirements, installation type, current carrying capacity, cross section, overcurrent protection)
Work taskPartner/ team workTextbook
Norms, regulations
Calculations, diagrams/table books
Describe the installation of meters Meter arrangement
(central, decentral) Dimension of meter
alcoves types of meters,
parameters, connections Assessment of wires and
costs
Partner/ team/ group workText bookNorms, regulationsWork task
43
Describe the task of the main potential compensation system physical background application of regulations components of the HPA electrical grounding,
conductor cross-section and labelling
Test/examination
Teacher informationNorms, regulationsLaboratory experiment (protective measures)
Time offset 4
Learn Field6 Analyze and verify electric systems and electric equipment Objectives:
The trainees carry out conversations with customers for the detection of fault symptoms in electrical systems and equipment. They evaluate interview protocols, analyze the symptoms and narrow down the error. They advise clients according to economic aspects of the nature of troubleshooting and create cost estimates for repair orders
The trainees plan and organize the execution of orders. The trainees choose from testing and measuring equipment for fault
diagnosis. They use operating instructions in English. Perform visual inspections, tests and measurements on individual components of plants. Choose measured values and waveforms, and assess it with regard to a proper and reliable function. They distinguish the signal on the shape, bandwidth and transmission speed. They use circuit and signal flow diagrams and device documentation and apply troubleshooting strategies. They describe and evaluate phenomena of components and ASSESS the impact on the overall System.
The trainees carry out repairs, adjustment and adjustment of faulty equipment and devices.
The trainees check set installations and equipment and sub functions. They document the measurement results with the help of information systems.
The trainees create invoices, analyze and pass the thesis set in state facilities. They demonstrate the functionality of the equipment and have the customers' attention to the causes of faults.
Contents: Interfacesfor analogue and digitalsignals Device andsystemtesting Measurementof electrical andnon-electrical quantities Sensorsand actuators measuring and test equipment Faults inenergyand information flows
44
Troubleshooting strategies Repair Order provisions ofoccupational health and safety
Educational objectives:
Professional competencesThe trainees will be able to …
runall steps for planning a living room installation - from the definition of content value to the correct selection of overcurrent devices and checking the voltage drop (see syllabus).
describe the task and the execution of protective measures in accordance with norms.
apply knowledge of safety measures when installing and operating electrical systems.
shutdown principle of protection by automatic disconnection explain the power supply and call disconnection
explainthe difference between border and expected values for protective wire, insulation and internal resistance as well as the loop impedance explain
name the structure and labeling of network systems and their features, such as designate disadvantages of the TN-C system with regard to EMC
create and assess by inspection, testing and measurement for the (initial) testing of fixed electrical installations whether the system may be put into operation.
Priorities for social and personal competences
The trainees…
identify the personal requirements to fulfill the sales order. train cooperation, independence and work purposefully. comply with standards, rules and regulations. make and organize the planning of a distribution team. present the resultsof their work. assess their work process using a score sheet. be aware of dangers of electrical energy.
Material/ time plan:
Learning situation Learning action Hours96
Proposed methodologies
45
6.1Conduct installations in apartments
Generate specifications for housing space determine equipment value choose equipment draw an installation plan prepare a bill of materials
Composition, types and denomination of cables and lines
Determine current carrying capacity of cables laying procedure, choice of
width
24 Partner/team work
Table book
with CADCataloguesOnly short repetition because the topic was already covered in LF 2!
Table book (s. LF 2)
Choose an overcurrent protection Function, necessity of the
overcurrent protection Types Function, shutdown
behaviour, properties (including special electric circuits)
Selectivity (significance) Sequence of switching-on
Book
Work task
Table bookCalculation (shutdown currents, shutdown periods, working with diagrams)Laboratory experiments (protective measures)Regulations
Connect chosen household appliances determine rated output and
current load determine conductor cross-
section choose overcurrent
protection installations
Work task
Check line voltage drop rules calculations evaluate results
Test/examination
Work task
Laboratory experiments (protective measures)Project: Planning of a distributor of an apartment
46
6.2Protective measure according to laws/regulations
Describe function and types of protective measures Effect of body AC, safety
at work overview standards terms and definitions Network systems (only IT) Basics of protective
measures RCD, specific protective
measures (electric installation in bath rooms, additional safety potential equalization in bathrooms)
58
Dangers of electricity and safety rules, see LF 1Calculation (shutdown currents, shutdown periods, resistance equivalent electrical circuits diagrams, working with diagrams)Laboratory experiments (protective measures)Demonstration experiment, group work
Perform (initial) test of fixed facilities inspect, test and measure low-impedance of
protective conductors insulation resistance loop impedance, short
circuit current RCD(residual current
device) test internal resistance Rotating field evaluation of testing results inspection protocol
error analysisInstallation project on the effectiveness and test of protective measures
Laboratory experiments (protective measures)Demonstration experiment on special boardsWorking with norms/regulationsPresentationsCustomer dialogue (handing over of facility)
Time offset 14
47
Learn Field7 Program and implement control systems
Objectives:
develop controllers as specifications. They develop solution designs, evaluate and choose among the business aspects of an optimized solution. They use different sources of information, also in English.
implement controls to program and configure the components of the systems. They take into account standards and safety regulations. Configure the equipment and adjust the function of components or sub-systems the terms.
Examine program processes, ensuring compliance with safety and function of the controls. They analyze the involvement of diagnostic systems and repair those.
handed over the equipment and documentation created it and instruct you in the use.
Contents:
Components of thecontrol and regulationtechnology Sensors and actuators (first informationin the LF3) Signal and datatransmission systems Bus systemsand theirspecific applications Building Control (to LF9) Programming algorithms Diagnostic systems
Educational objectives:
Professional competences
The trainees will be able to…
name the application possibilities of a multi-function display (MFD). program an MFDby computer name the construction, operation and characteristics of the components
used for a customer order circuit (eg contactors, Easy, sensors, actuators) perform the wiring and programming of a control program for a small
control unit(EASY). program the simple program examples with function blocks. modify a control circuit according to customer wishes perform a finished Check control circuit and rectify any fault. connect a three phase asynchronous motor in star or delta connection. describe the operationofthe overload relay andmotor protectionrelay(LF
8)
48
carry outsimple currentand voltagemeasurements onmotors. convert a VPScontrolto a reversing contactorcircuitand star-
deltacircuitautomaticallyinto an easycontrol.
Priorities for social and personal competences
The trainees…
determine the individual needs to fulfill the sales order. train cooperation, independence and work purposefully. are able to instructa customer inthe functionof a system. comply with standards, rules and regulations. make and organize the modernization of customer-control circuit in the team. are able to information search purposefully from the Internet and use them to
solve problems are able to use manuals to solve technical problems have a customer in the function of Easy control and may consider requests
for changes.
49
Material / time plan:
Learning situation Learning action Hours
120
Proposed methodologies
7.1
MFD
Trainees are informed about micro controllers and basic possibilities for using MFD (Multi-Function Display)
24 Teacher presentation, internet
MFD-course at the beginning of the 2nd year of education
7.1.1
Introduction into MFD and their programming options
Trainees can install and run the software EASY-Soft (incl. operating system WIN XXX) on a PC
Trainees can program a MFD
Trainees can test EASY programs with a simulator
Trainees understand the basic functional mode of micro controllers
Trainees get to know the saving function (SR) and can use it
Trainees can visualize simple control programs
Teacher presentation,
installation of an image (q.v. LF4)
Using EASY software or, respectively, keyboard entries directly at the MFD
Software simulator in EASY software or hardware simulator at the MFD
Check wire resistance (opener at RESET) Note signal state check!
Visualizing with EASY-Soft
Project grade7.2
Customer order 1
Analysis of a customer order 24 Possible customer orders
soldering bath
Door control
Parking house
Mind Map7.2.1
VPS control and simple main circuit
Construction of a VPS control according to plan
Analysis of its functions
Specifications through teacher (customer)
Combination with learning field 8 advised
50
7.2.2
VPS control
Conversion of the construction according to customer requirements (functional specification)
Trainees know the function of engine protection switches and engine protection relays and can ensure engine protection
Designing and handing over of modified facilities to the customer
Student-student dialogue
Connect a three-phase asynchronous motor
Setting electricity values of engine protection relays
Functions in LF 8
7.2.3
Sensors
Trainees are informed about different types of sensors
Trainees know the application area of sensors
Test/examination
Basic experiment in the laboratory
Refresh prior knowledge from Lf 3
Internet
Teacher presentation
Exploring a facility, e.g. an elevator in WCC
7.3
Customer order2
Easy
Trainees have an overview over functions of micro controllers
Trainees are familiarized with sensors und actuators
Trainees can generate an EASY program at the PC and test its functionality in an integrated simulator and remove errors (system for diagnosis)
54 Internet, computer laboratory, teacher presentation
Special inductive and capacitive proximity switch
Lift gate, pump controls, conveyor belt system, and so on
Examples for EASY (network drive [Reference book]
automation
7.3.1
Easy control
Trainees can wire an Easy control and load a completed program
They are able to check the function according to customer requirements
Trainees heed the emergency shutdown, wire fault protection and contactor locks
Security aspects of programming:
open circuit principle (closer)
closed-circuit principle (opener)
Wire resistance and earth fault protection; Electro mechanical locking and so on.
51
7.3.2
Easy control and challenging main circuits
Trainees can build and test an Easy control circuit and a reversing contactor or star-delta connection
Programming through direct entering of a given program
Trainees are able to analyses and describe programs
Trainees hand over customer facilities and perform adjustments if necessary
Trainees are able to measure electricity and voltage values in the main circuit
Trainees document their work
Connection tot Lf 8
Repetition measurement of electrical properties
Control laboratory EASY 500
7.3.4
Adjust Easy control
Customer consultation
Trainees can integrate sensors in existing facilities according to customer requirements and do necessary changes of the program
Trainees instruct customers into functions of the facility and explain security functions
Trainees can generate and price a simple bill of materials
Project grade
Catalogues
Time offset 18
Learn Field8 Select and integrategear systems
Objectives:
analyze customer orders for the realization of power transmission systems. Select devices, components and protective devices from under functional and economic aspects and dimension them.
install and expand technical drive systems. They take these systems into operation and set the corresponding parameters. They take into account safety requirements, standards and regulations.
examine the function of the technical drive systems take a systematic fault finding and troubleshooting. They assess the electromagnetic compatibility of drive technology systems and take measures to ensure.
create documentation of technical drive systems. Explain to customers the features of the systems and instruct you in the use.
Contents:
52
Electromechanical componentsTypes ofmotors (LF 8: AC asynchronous motor, AC motor, LF11:shaded pole motor, universal motor
Types, modes of protection Starting and braking techniques, turning frequency control
converter Protective devices
Educational objectives:
Professional competences
The trainees will be able to…
explain the construction of athree-phase asynchronous(squirrel cage) andAC motor
connect a three phase asynchronous motor in star or delta connection runathree-phase asynchronous , record the run-up characteristics and the
speed-torque characteristic describe the importance ofthe speed-torquecharacteristic and therun-up
characteristicsof athree-phase asynchronous operate an AC motoras aninduction motorandhold arun-up characteristics safe decide whether a three phase asynchronous motor in star or delta
connection can be connected to the mains. distinguish between design parameters and operating variables of engines. assess the importance of modes (S1and S2) and degrees of protection for
the use of motors. name plate data of engines interpret physically and perform computations
for efficiency. perform tests on electricalmachines in an easy way distinguishshort-circuit andoverloadprotection of motors describe the structureand operationofmotor protectionswitches,
motorprotection relays andmotor protection consider the similarities and differencesof athree-phase asynchronousAC
motorand choosea drive systeminto account
Priorities for social and personal competences
The trainees…
work independently. comply withstandards, rules and regulations. consultspecialist literature. leadwith a customerand havethe customerinthecustomer system.
53
Material / time plan:
Learning situation Learning action Hours
96
Proposed methodologies
8.1
Customer order 1
Choose and test engines
Analysis of a customer order
Customer consulting on the use of engines in drive systems
74 Customer order with close connection to customer order LF 7 possible
Same customer order
8.1.1
Planning of orders
Choice of drive system
Trainees are informed about engine types and their use
Trainees know the composition of three-phase asynchronous motors and single-phase AC motors
Trainees are familiar with capacity plates and can calculate the energy efficiency
Trainees know the difference between operation category S1 and S2
Trainees get to know the meaning of protection types of motor engines
Trainees can measure the winding and insulation resistance. They can evaluate their measurements.
Trainees record the run up line anddrive torque line
Overview engine types
Basic experiments in the laboratory
Book
Engine types:
three-phase asynchronous motors and single-phase AC motors, DC motors etc.
8.1.2
Protection system of engines
Trainees become familiar with the construction and mode of function of engine protection switches, engine protection relays
Trainees know the significance of full protections for engines
Book, internet, laboratory
54
8.1.3
Starting of three-phase asynchronous motors
Trainees are informed about the necessity of the use of starting circuits
Trainees know the star-delta starting
Trainees know the about the use of convertors for the start of engines
Test/examination
Demonstration equipment
Basis and automatic starting circuits
8.1.4
Customer order
Complete customer order
Ability to justify choice of engine
Generate documentation
Documentation of results
Project grade
Time offset 22
Learn Field 9 Plan and implement communication systems in residential and commercial buildings
Objectives:
The trainees identify and analyze the customer meeting the requirements of the communication system. You agree to the customer from the operational, economic and legal options.
The trainees agree with the customer from the selection of the components of current communication and bus systems for residential and commercial buildings under the aspects of performance, convenience, and future orientation. Are you planning an energy management for commercial buildings and a visualization to represent the data and system states, evaluate interfaces of networks.
They use current media for obtaining information, also in English. The trainees configure, install, parameterize and program the
communication systems. Check the equipment on their functions, carry out systematic fault finding through and fix the errors. Create documentation on the basis of measurement protocols and technical tests.
The trainees explain the customer how to operate the systems and point to services.
Contents:55
Paging systems Telecommunications terminal equipment and systems Alarm systems Building control Visualization Antennas and broadband communication system Customer consultation and briefing
Educational objectives:
Professional competences
The trainees will be able to…
identify the structure of antenna systems explain the importance of the amount of gain and attenuation constant rate explain the function of antennas measure and assess level explain the construction of an analogue phone call explain application-neutral, structured cabling (areas, RJ 45 wiring, patch
panels) describe the construction of an analogue phone connect analog phones and program services explain the principle of operation and the connection of an ISDN phone explain the benefits of digital telephony name the development of EIB designate facilities name the benefits of the system EIB call assess message transfer in EIB declare apply to transfer safely put in operation a method to request data telegrams program an EIB installation, commissioning operation reprogram an EIB system according to customer apply important regulations for the installation of EIB systems identify the modes of action of intrusion detection systems (IDS) and fire
alarm systems (BMA). call the components of an alarm system wirean alarm system with alarm lines. assess the proper function an alarm system
Priorities for social and personal competences
The trainees…
56
work independently in groups and / or assess their projects (eg. antenna projects) independently can information from the Internet search targeted are capable of operating instructions to use in English, in order to solve
technical problems. develop strategies for troubleshooting, even in EIB systems instruct a customer in the function of a system and can take into account
change requests. can conduct customers conversations to instruct the min plants
57
Material / time plan:
Learning situation Learning action Hours
150
Proposed methodologies
9.1
Customer order 1
Antennas and broadband communication system
Analysis of a customer order
(Traineesanalyzes requirements for planning an antenna installation)
36 Analysis of prior knowledge
Book
Small working groups
Mind map
9.1.1
Theory antennas
Getting to know composition and types of antennas and antenna installations (plug sockets distributors, amplifier)
Trainees understand the basic functional principles of antennas
Information on the mechanical stability of roof antennas
Trainees learn the importance of level values
Trainees know advantages and disadvantages of network structure
Test/examination
Teacher presentation
Self-dependent Work
Book
Corporate documents
Demonstration equipment → antennas
9.1.2
Project antennas
Planning a simple antenna installation
Project grade
Special homework
Group work
9.1.3
Measurement exercise
Trainees know the level in BK installations
Traineespractice measuring levels of an antenna installation
Laboratory exercise
Group work
9.2 Planning PBX (Private Branch Exchange) Telecommunications
40
58
9.2.1
Structured wiring
Data networks
Trainees learn about the advantages of structured wiring. They know the three areas, the circuits of patch field, plug sockets and categories of different components respectively
Teacher presentation, book, internet
9.2.2
Analogue telephones
Trainees learn the basic mode of functioning of analogue telephones
Script analogue telephony
9.2.3
Customer order2
Install and configure analogue telephone installations
Trainees can wire a TAE plug socket
Trainees get to know different types of plug sockets
Trainees are able to program different services with the help of an instruction manual
Trainees instruct customers in the use of services
Test/examination
LaboratoryAnalogue telephonesInstruction manual
9.2.4
ISDN
Trainees know the function of NTBA
They are informed about the emergency supply
They know how to connect IAE plug sockets
Trainees are able to protocol D-channel with appropriate technology
Test/examination
Script digital telephony
Laboratory demonstration using an ISDN installation and telephones
9.3 EIB (European Installation Bus)
36
59
9.3.1
Getting to know EIB
Trainees know the advantages of EIB in comparison to classical electric installations
They are informed about composition and devices of EIB installations
They know the procedure of assigning addresses for the EIB
They get to know the parity for securing data
They know important regulations for building EIB installations
Learning program
Working sheets
9.3.2
Customer order 3
Programming and initial operation
Programming of controls of lighting installations and von lightings and sun-blindscontrollers according to customer requirements
Test/examination including programming
Laboratory, work with Powernetsuitcases
Group work
Work with software Busch Powernet
Working sheets
9.4.
Customer order –
alarm system
16
9.4.1
Basics
Trainees get to know components and functions of alert systems
Teaching book, manufacturer documents, working sheets
9.4.2
Customer order 4
Trainees prepare a visualization of functions of alert systems of a customer
Trainees know the principle of alert systems and fire detection lines respectively
Trainees know the functional mode of detectors, sensors, coder and encoder
Experiments in small groups
Time offset 22
60
Cycle: Advanced
Learn Field 10 Take electrical installations of building services in operation and maintain
Objectives:
The trainees advise clients on the selection, use and applications of electrical plant and equipment of the building services. They take into account energy-related, environmental and economic aspects.
The trainees design and install systems of building equipment and put them into operation. They connect to required sub-components to water, wastewater and air-conducting piping systems. Apply the relevant standards and regulations and respect the security rules.
The trainees plan, build and test the internal lightning protection and assess the external lightning protection in accordance with the need to protect the building. They take into account relevant standards and regulations.
The trainees perform the prescribed function check, set up a plant according to the requirements of customers and provide home appliances on and assign users and advise on necessary maintenance work and offer maintenance contracts.
The trainees move from defective components and equipment and dispose of properly this and residual materials. They acknowledge polluted components and equipment and lead them to the environmentally responsible manner
Contents:
Lighting systems Electric heating appliances, water heaters Airconditioning, refrigerationunits, heat pumps Provisionsfor the connection ofelectricaldevices topiping systems Home appliances Lightning protection Customer service, sales call
Educational objectives:
Professional competences
The trainees will be able to…
61
design a lighting system for a customer order. explain requirements for a modern lighting system state. select and evaluate different light sources according to the lighting task. calculate a lighting system with a computer program . use simple dimensions of compensation capacitors explain applications of electrical heating appliances and water heaters
call. apply data sheets, descriptions and operating instructions for the heat
pumps in English. explain in a customer service pros and cons of home appliances. get information on pollutants in household appliances in general outline estimate the external lightning protection of a building estimate assess in the context of a customer order internal lightning protection of
the building and roughly plan. conduct measurements on portable equipment.
Priorities for social and personal competence
The trainees…
work independently comply with standards, rules and regulations. turn toliterature anduse information andcommunication media. assess their projects self-critical. Lead sales conversation on home appliances especially in terms of energy
efficiency and environmental performance of household appliances. present their lighting system. conduct experts discussions.
62
Material / time plan:
Learning situation
Learning action Hours
144
Proposed methodologies
10.1.
Customer order 1
(lighting installation) 30 h
Analysis of a customer order
Requirements for a modern lighting installations
44 Team work
Book
10.1.1.
Development of proposals for solution
Information about lamp types light engineering basic parameters
energy saving lamp, LL VVG, EVG, LED
trailing-edge phase control
Compensation calculation LL
Lighting installation calculation without PC (example)
Test/examination(lamps / compensation LL)
Internet, book, manufacturer documents
Produce simple installation plans
Measuring intensity of illumination (group work)
10.1.2.
Solution build
Calculation with PC software
(special software: Dialux or Ellux)
Making a material bill
Documentation
Use of manufacturer documents
Internet, writing software
10.1.3.
Presentation
Project (lighting installation)
10.2.
Household appliance
35 h
Overview over household appliances 50 Teacher presentation
10.2.1.
Warm water devices
Trainees get to know flow-type heaters and storages
Trainees inform themselves about phase-angle and burst / cycle control for power controlling systems
Corporate documents
Sanitary wall
Modell flow-type heater
63
10.2.2.
Electric heat devices
Trainees get to know different types of electric stoves and can name their advantages and disadvantages (seven cycle, induction cooking hob)
Trainees get to know properties of electric components of washing and are able to evaluate them,
Motors in household appliances shaded pole motor, capacitor motor, direct drive motor
Understanding an electric iron as a two-level controller
Test/examination (electric components in households appliances)
Internet, demonstration equipment
Measurements stove (repetition and proactive measures)
Motor types (team work)
Experiment
Electronic convertor application
10.2.3.
Refrigeration devices
Trainees can describe functional principle of refrigeration devices
Heat pump
Use of manufacturer documents also in English language (heat pump)
Data sheets, corporate documents
Demonstration equipment
Student presentation
10.2.4.
Environmental aspect
Contaminants in household appliances
Trainees can state ecological aspects of household appliances
Internet, book
10.3.
Customer order 2
(lightning protection) 14 h
Analysis of a customer order 20 Corporate documents
Team work
10.3.1.
Installation evaluation
Requirements for lightning protection installations
Trainees learn through selected examples the necessity of external and internal lightning protections
Evaluation of an external lightning protection installation
Applying rules for lightning protection
Case study
64
10.3.2.
Planning the internal lightning protection
Selection of necessary equipment and resources
Trainees get to know the mode of functioning of deflectors for overload protection
Trainees learn to plan the lightning protection concept according to customer requirements
Corporate documents, internet
Time offset 30
Learn Field 11: Build energy Equipment, operate and maintain :
Objectives:
The trainees examine ways of delivering electric energy from the point of supply and future security. To this end, they analyze networks, decentralized energy supply systems as well as renewable energy sources.
The trainees advise clients about their possible use from economic and ecological aspects.
The trainees build energy systems, take this in compliance with safety regulations in operation and create the documentation. You pass the customer's system; they have touseone, explainfeaturesand refer towarranty claims.
The trainees lead in energy supply systems by taking into account safety switching operations and maintenance and repair measures.
Contents:
Network forms Construction and switching groups of three-phase transformers Rules for switching operations and the installation of energy supply
systems Switchgear Photovoltaic Combined heat and power Fuel cell Inverter Interruption andinterference-freepower supply Compensation
65
Educational objectives:
Professional competences
The trainees will be able to…
describe the structure of the relevant international and interregional electricity supply system.
describe the function and significance of important switching devices in the HV network.
conduct calculations onTP transformer. chose resources of energy supply. explain the function of afuel cell,declare asenergy producersof the future name thecomponents of aphotovoltaic installations. estimate the importance of UPS estimate estimate the importance of assessing compensation and carry out simple
calculations.
Priorities for social and personal competences
The trainees…
work independently. comply with standards, rules and regulations. turn to literature and use information and communication media. assess their project. present the planning result
66
Material / time plan:
Learning situation Learning action Hours 110
Proposed methodologies
11.1.
Energy production and distribution
Historical development of energy supply
44 DC or AC
Overview
11.1.1.
Classification of energy production in the overall system of electrical power supply
Getting to know the structure of energy grids
Types of power plants
Trainees acquire the ability to name important control units, switch gears and explain their function
Informing themselves about the importance of USV (Uninterruptable Power Supplies)
Trainees know the importance of power-heat cogeneration plants
Internet, book, Worlds of energy
Interactive learning material of residential power companies
11.1.2
Three-phase transformer TP-Transformers)
Trainees know importantcontrol units of TP transformers and their function
Trainees are able to do calculations at TP transformers
Test/examination
Exercise in the laboratory
11.2.
Project:
Renewable energy 30 h
Analyze a project and plan proposals for solution
44 Teacher presentation
Team work
11.2.1
Fuel cells
Trainees get to know an eco-friendly technology for energy production: the fuel cell
Special types for demonstration
11.2.2.
Photovoltaic systems
Trainees know the structure of a photovoltaic system
They are able to name components
They can take measurements of a photovoltaic system
They know the basic function of a inverter module
Book, internet, solar program exercise, visit of plants or exhibitions
11.2.3.
Documentation
Preparation of a circuits diagram
Bill of materials
Documentation
Drawing, book, manufacturer documentation, instructions
67
11.2.4
Presentation
Analysis
Project grade11.3.
Visit of a power plant
Visit of a power plant or distribution station
8
Time offset 14
Learn Field 12: Plan and implement energy and building services
Objectives:
The trainees create projects for energy and building services. They define goals, analyze and structure tasks in terms of their feasibility and considered in the project selection, the fields of application.
The trainees plan, develop and implement practical solutions. They take responsibility for project organization and the coordination of learning and work processes. They document the project progress, analyze and evaluate the project. Note due legend standards and procedures of the quality management element and ensure the quality of products and processes.
The trainees build energy and building services or plant components, put them into operation and check partial and total functions. They demonstrate structure and function of plants or plant components.
The trainees consider during project realization recycling opportunities and environmental ¬ intolerances.
They create and modify the project documentation, also in English-language documents and present their results. They use current information and communication media.
The trainees assess project results and processes of action under learning and work organization, technology and economic aspects.
Contents:
Project description Time andwork planning(LF 1) Energy and Building Systems Antennasand broadbandcommunicationsystems(LF9) Standards, regulations and rules
68
Project evaluation Quality assurance Project evaluation
Educational objectives:
Professional competences
The trainees will be able to…
Design a sales installation and circuit diagrams. Estimate the overall performance and-assess current consumption. prepare the registration of the investment by competent distribution
center. select the rated values of the resource according to the sales order and the
structural conditions of the building to select. plan the material and time requirements calculate the internal line resistance, the impedance of the fault loop and
the voltage drop determined. Select appropriate protective measures. checkthe protective measuresand work out thetest documents.
Priorities for social and personal competences
The trainees…
work complex and independently. Comply withstandards, rules and regulations. turn to literature and use information and communication media. ensure the quality, especially of the documents. assess their project. lead with a customer, especially with the introduction to the customer
system (operation and safety aspects). present the planning result. lead discussions on selected technical characteristics of the installation.
Material/ time plan:
Learning situation Learning action Hours128
Proposed methodologies
12.112.1.1Costumer order 1Realization (residential building, apartment)
Analysis of a customer order Compilation of norms,
regulations and rules
54
12.1.2Development of proposals
Planning and dimensioning of the house service connection
Production of a technical
69
for solution (overall system, electric circuits)
(including the “industrial domain”; customer order 2), the main line and the elements of the sub-circuit distribution boards
Installation plans Circuit diagramTest/ examination
documentation- overall system- sub-circuit distribution boards- electricity for lamps/ plug sockets
12.1.3Choice of equipment
Preparing a bill of materials Use of documents(catalogues of wholesalers)
12.1.4Calculations
Internal resistance of network (conductor resistance)
Loop impedance Voltage drop
Comparison of critical values
12.1.5Quality control
Testing of facilities (safety and function)
Filling in an inspection protocol Final control (real facility,
documents)
Observance of the technical correct order of tests and testing conditionsTest
12.1.6Facility handover
Customer dialogue: Instruction into handling, safety aspects and service
Technical discussion: Explaining theoretical and practical relationships
Communication training
12.1.7Presentation (of selected results)
Comparison; if applicable correction of planning documents
12.2
12.2.1
Customer order 2
Realization (for the industrial domain)
36 h
Analysis of a customer order
Compilation of norms, regulations and rules
54 Focus: motor circuits without EASY; three-phase circuit with load P>10kW
12.2.2
Development of proposals for solution (overall system, electric circuits)
Planning and dimensioning of the house service connection the main line and the elements of the sub-circuit distribution boards
Installation plans
Circuit diagram
Registration at the VNB
Production of a technical documentation for
- overall system
- sub-circuit distribution boards
- control/load circuits
12.2.3
Quality control
Testing of facilities (safety and function)
Observance of the technical correct order of tests and
70
Filling in an inspection protocol
Final control (real facility, documents)
Test/examination
testing conditions
Past experience
12.2.4
Facility handover
Customer dialogue: Instruction into handling, safety aspects and service
Technical discussion: explaining theoretical and practical relationships
Communication training
12.2.5
Presentation (of selected results)
Comparison; if applicable correction of planning documents
Time offset 20
Learn Field 13: Keep energy and building services in state and adapt
Objectives:
The trainees plan maintenance and modification measures in energy and building facilities.
The trainees analyze faults and apply methods and strategies for the systematic fault isolation and correction in energy and building systems or system components. Change energy and building services systems or system components according to customer requirements and document them properly.
The trainees have the customers in the operation of a modified plants, information on legal requirements for maintenance and explain the changed conditions for maintenance.
For the project documentation, the trainees use English-language documents and present their results.
The trainees reflect on their professional learning and work processes. To further develop their skills and qualifications they use appropriate training and development opportunities as well as different under ¬ learning techniques and media.
71
Contents:
Maintenance Concepts Standards, regulations and rules Customer consultation and briefing Process documentation Knowledge Management
Educational objectives:
Professional competences
The trainees will be able to…
develop a strategy to change the existing electrical system by modification of a customer order (LF 12.2).
select the resources according the customer order. check the system and work out the relevant documents
Priorities for social and personal competences
The trainees…
work complex and in groups and / or self-employed. comply with standards, rules and regulations. turn to literature and use information and communication media. ensure quality. assess their project. lead with a customer, especially with the introduction to the revised
customer system (operation and safety aspects). present the planning result. analyze fault or error sources and error. develop strategies for troubleshooting.
72
Material /time plan:
Learning situation Learning action Hours 100
Proposed methodologies
13.113.1.1Customer order 3Realization (for the industrial domain)
Analysis of a customer order (Changes of LF 12.2)
72 Focus: motor circuits with EASY
13.1.2Development of proposals for solution
circuit diagram function chart (EASY)
Test
Production of a technical documentation
13.1.3Error analysis and correction
Analysis of programming errors and correction
Removal of errors in general operating error functions
Mutual integration and elimination of errors under laboratory working conditions
13.1.4Quality control
Testing of facilities under safety aspects
Final control (real facility, documents)
Calibration of motor protection measures;Assignment of annunciators;Locking device
13.1.5Facility handover
Customer dialogue: Instruction into handling, safety aspects and service
Technical discussion: explaining theoretical and practical relationships
Test/ examination
Communication training
13.1.6Presentation (of selected results)
Comparison; if applicable correction of planning documents
Time offset +GP-preparation
28
73
5. LIST OF LITERATURES
74
75
Name Author Publisher Edition Number
Purpose / Covered topics
ISBN code
Place of publication
Year of publication
Module(s) where will be used
Total quantity
Comments
1. Used Textbooks1
Technical knowledge of Electrical Engineeringwith DVD
Horst BumillerMonika BurgmaierWalter EichlerBernd FeustelThomas KäppelWerner KleeJürgen ManderlaOlaf ReichmannJürgen SchwarzDipl.-Ing. Klaus TkotzUlrich WinterKlaus Ziegler
Europa Verlag
29. Basic and expertise for the entire career field electrical engineering with a focus on energy technology for all trade and industrial occupations. Supports hands-on instruction.
Europa-Nr. 30138ISBN 978-3-8085-3190-7
GermanyPader-born
2014 All professions,all Learning fields
160 Textbook will be translated in English
2
Examination bookElectro engineering
Horst BumillerMonika BurgmaierMarkus BüssingMartin HerwerthArmin SchonardJürgen SchwarzDipl.-Ing. Klaus Tkotz
Europa Verlag
17. Typical projects as well as professional testing examples with detailed solutions provide insight into the scope of the audit
Europa-Nr. 30650ISBN 978-3-8085-3567-7
GermanyPader-born
2013 All professions,all Learning fields
160 Direct reference is made to this book according to questionnaire of all Learning fields
3 Monika Burgmaier
Europa Verlag
4. Compact workbook
Europa-Nr.
GermanyPader-born
2012 All professions,
160 Direct reference is