JSS MAHAVIDYAPEETHA JSS ACADEMY OF TECHNICAL...

JSS MAHAVIDYAPEETHA

JSS ACADEMY OF TECHNICAL EDUCATION JSSATE Campus, Uttarahalli – Kengeri Main Road, Bangalore – 560 060

Phone: 080-28611902, 28612797 Fax: 080-28612706 www.jssateb.ac.in

Department of Mechanical Engineering List of

Papers published in International Journals 2017-18 and

2018-19

SL.

No

Name of the Faculty Title of the Article Journal/Magazine/ Organizer Month, Year, Volume

1 Dr. B P Shivakumar

Hanumantrayagouda M.B.,

Siddappa P.N, Sampathkumar L,

and Prashanth L

Effect of Cold Forging on Microstructure and

Mechanical Properties of Al/SiC Composites

Materials Science and Engineering,

310 012072 doi:10.1088/1757-

899X/310/1/012072.

IOP publishing

2018


Siddappa P.N, Yogesha K.B.,

Mruthunjaya M. &

Hanumantrayagouda M.B

Machinability study of Al-TiC metal matrix composite

SJR Journal, pp. 1-14. Jan.

MATEC, 144, 03001,

2018.


Suresh Holi A Genetic Algorithm Based Approach to Job Shop

Scheduling with Sequence Dependent Setup Times

International Journal of Latest Technology in

Engineering, Management & Applied Science (IJLTEMAS), Volume VII, Issue X, PP48-52.

October 2018, | ISSN 2278-

2540.


Suresh Holi Routing Flexibility in Job Shop Scheduling Problem -

A Genetic Algorithm Approach.

International Journal of Research and Scientific

Innovation (IJRSI) | Volume V, Issue XI, PP 60-

64.

November 2018 | ISSN

2321–2705.

5 Dr.B. P. Mahesh

Shreyas. P. S

Dr.Rajanna. S

Dr.N. Rajesh Mathivanan

A Prediction Of Fatigue Life In Gfrp Composite

Laminates Subjected To Low Velocity Impact

International Journal Of Mechanical And

Production Engineering Research And

Development (IJMPERD)

Vol. 8, Special Issue 8, Oct 2018, 363-368

ISSN(P): 2249-6890;

ISSN(E): 2249-8001

Oct 2018

6 Raghavendra B.V

Savina J P

Effect of Fabrication Methods on Mechanical

Properties and Machining Parameters of Aluminium

Matrix Composites-A Review

Materials Today: Proceedings,5 (2018), PP:

22576–22580

DOI:

10.1016/j.matpr.2018.06

.631

7 Dr. T S Nanjundeswaraswamy

Varun R A Literature Review on Parameters Influencing

Abrasive Jet Machining and Abrasive Water Jet

Machining

Journal of Engineering Research and

Application,

ISSN : 2248-9622

Vol. 9,Issue 1 (Series -I) pp 24-29 DOI: 10.9790/9622- 0901012429

Jan 2019

8 Dr T S Nanjundeswaraswamy

Anup A Teragundi , Bhavana K B ,

Literature Review on Synthesis of ZnO Nano

Particles Using Natural and Synthetic Methods


Innovation, ISSN 2321–2705

Volume V, Issue X, PP67-71

December 2018

9 Yogesha K B

Joel Hemanth

Finite Element Analysis (FEA) and Thermal Gradient

of a Solid Rectangular Fin with Embossing’s for

Aerospace applications.

Advances in Aerospace Science andTechnology.

Vol 3. Pp: 49-60. Scientific Research Publishing

Inc., USA,ISSN Online: 2473-6724 ISSN Print:

2473-6708.

July 20, 2108

Doi.org/10.4236/aast.20

18.33004

http://www.jssateb.ac.in/

SL.

No Name of the Faculty Title of the Article Journal/Magazine/ Organizer Month, Year, Volume

10 B.G. Prashantha

M.S. Govinde Gowda, S. Seetharamu and

G.S.V.L. Narasimham

“Design and Analysis of Acoustically-Driven 50 W

Thermoacoustic Refrigerators”

SADHANA-Journal (Proceedings in

Engineering Sciences)

11 B.G. Prashantha

M.S. Govinde Gowda,

S. Seetharamu and

G.S.V.L. Narasimham

“Design and Analysis of Thermoacoustic Refrigerators

Using Air as Working Substance”

International Journal for Air-conditioning and

Refrigeration.

12 K.S. Anil Kumar

S.M.Murigendrappa ,

Hemantha Kumar

A Bottom-Up Optimization Approach for Friction Stir

Welding Parameters of Dissimilar AA2024-T351 and

AA7075-T651 Alloys

Journal Of Materials Engineering And

Performance, ISSN 1059-9495, Vol 26,Is no. 7,

p3347-3367, DOI 10.1007/s 11665-017-2746-z

13 K.S. Anil Kumar

S.M.Murigendrappa ,

Hemantha Kumar

Experimental investigation on effects of varying

volume fraction of SiC nano particle reinforcement on

microstructure and mechanical properties in friction stir

welded dissimilar joints of AA2024-T351 and

AA7075-T651

Journal Of Materials Research (JMR)

Accepted for publication

14 Venkatesh B.N

M.S.Bhagyashekar Corrosion Studies of AA6061-SiC Composites and

AA6061-4.5%Cu- SiC Hybrid Composites before and

after Friction Stir Welding

International Journal of Engineering

Science and Computing, ISSN 2321 3361 May 2018 Volume 8 Issue No.5 Page:

17612-17616

15 Devappa

T. M. Chandrashekharaiah

Studies on the Effect of Al-1Ti-3B and Al-10Sr Master

Alloys on Fracture Toughness and Fractographical

Analysis of Binary Al-10Si Alloy

International Journal of Latest Technology in

Engineering, Management & Applied Science

(IJLTEMAS) Volume VII, Issue III, March

2018 | ISSN 2278-2540, page254-258

16 Devappa

T. M. Chandrashekharaiah

D.N. Roopa and

Somashekar Hiremath

Effect of Structural Changes on Microstructure,

Mechanical Properties and Fractographical Analysis of

Binary Al-12si Base Alloy


Innovation (IJRSI) | Volume V, Issue IV, April

2018 | ISSN 2321–2705, page339-343

17 Gowreesh S S

Srikantamurthy J S

Veeresh B R

Effectiveness Of Heat Transfer Intensifiers In A Fluid

Channel

International Journal Of Mechanical

Engineering & Technology (IJMET)/Volume

9/Issue 9/pages 58-62

September 2018

ISSN Print: 0976-6340

18 Santhosh Kumar B.M Dr.D.P Girish

“Evaluation of wear characteristic of

Aluminium 7075 based metal matrix

composite”

International Journal of Advances in

scientific Research &Engineering.

ISSN:2454-8006(Vol-04, Issue-02, Feb

2018).

JSS MAHAVIDYAPEETHA



Department of Mechanical Engineering

List of Papers Presented International Conferences [2017-18 and 2018 – 19]

Sl.

No Name of the

Faculty

Title of the Article Organizer Name of conference Dates & Year

1 Dr. Bhimasen

Soragaon

Dr. B P Mahesh &

Dr. Anandkumar R

Annigeri

Output Level Improvement in Small and

Medium-Sized Manufacturing Enterprises

with Regard to Factors Influencing Production-workers

- Proceedings of International Conference

on Industrial Engineering and Operations

Management, held at Paris from 26- 27, pp. 3057-3068 (In absentia)

July

2018,

2 Dr. Bhimasen

Soragaon Dr. B P Mahesh &

Dr. Anandkumar R

Annigeri

A Descriptive Statistics Analysis of workers personal factors on Overall Worker

Effectiveness (OWE)- A case of

Manufacturing SME’s

- Proceedings of National Conference on Industrial Innovative Management

Practices (IIMP-2018)

Dr. AIT, Bangalore-560056

15-16.

March,

2018

3 Dr. Bhimasen

Soragaon V Sivakumar,

K S Mahesh

On Some Aspects of Indirect Attainment of

Course Outcomes and Program Outcomes in a

Tier – II Engineering Institution.

- Proceedings of World Summit on

Accreditation, held on 7-9, Organized by

NBA, New Delhi.

Sept. 2018

4 P N Siddappa

B P Shivakumar

Yogeesha K B

Hanumantraygouda

M B

Machinability study of Al-TiC metal Matrix

composite

MATEC Web of Conferences International Conference on Research in

Mechanical Engineering Sciences RiMES

2017, MIT-Manipal

MATEC Web of Conferences 144, 03001

2018

21th – 23rd

Decembe

r, 2017

5 Mruthunjaya M

G. M. Swamy,

Shankaragoud

Nyamannavar

Health monitoring of Tool in Drilling Mild

Steel Using Acoustic Emission and Surface

Roughness Techniques and Optimization of

Process Parameters

ICCMEH2017

ICCMEH2017

4th International Conference on

Computational Methods in Engineering

and Health Sciences,

MIT-Manipal

Dece

mber

19-20,

2017


Sl.

No Name of the

Faculty

Title of the Article Organizer Name of conference Dates & Year

6 Mruthunjaya M

P.M. Suresh

Root Cause Analysis of Forged Spline Yoke

Shaft Using Finite Element Method

ELSEVIER : Materials today:

Proceedings

“IConAMMA-2018"

International Conference on Advances in

Materials and Manufacturing Applications

Volume 5, Issue 11P3 2018

ISSN 2214-7853

7 K.S. Anil Kumar

S.M.Murigendrappa ,

Hemantha Kumar,

Himanshu shekhar

Effect of Tool Rotation Speed on

Microstructure and Tensile Properties of FSW

Joints of 2024-T351 and 7075-T651

Reinforced With SiC Nano Particle: The Role

of FSW Single Pass

International Conference on Design,

Materials and Manufacture(IcDEM 2018),

NITK Surathkal,

AIP Conference Proceedings,

Volume 1943, Issue 1

https://doi.org/10.1063/1.5029632

29-31st

January ,

2018,

8 K.S. Anil Kumar S.M.Murigendrapp

Hemantha Kumar

Influence of tool probe offset and varying traverse speed on microstructure and

mechanical properties of FSW dissimilar

joints of AA2024-T351 and AA7075-

T651

7th International and 28th All India Manufacturing Technology, Design and

Research conference 2018 (AIMTDR

2018),

College of Engineering (CEG), Anna

University, Chennai

December 13-15, 2018.

Springer conference proceedings

9 Venkatesh B.N

M.S.Bhagyashekar “Wear behaviour of friction stir welded

AA6061-SiC composites and AA6061-

4.5%Cu-SiC hybrid composite plates"

3rd International conference on recent

advances in Engg Sciences (ICRAES-

2018) on 26th and 27th September at

MSRIT, Bangalore

10 Siddappa P.N.

MB

Hanamantraygouda, BP Shivakumar,

Siddappa. P.N L

Sampathkumar,

L Prashanth

Effect of Cold Forging on Microstructure and

Mechanical Properties of Al/SiC Composites

IOP Conference Series:

Materials Science and

Engineering,310,Feb 2018. doi:10.1088/1757-

899X/310/1/012072

IConAMMA-2017,

Amurutha college of engineering,

Bengaluru

11 Santhosh Kumar

B.M

Dr.D.P Girish

“Friction and wear behaviour of tungsten

carbide and E-glass fibre reinforced Al 7075

based hybrid composite”

IOP Publishing IOP Conf. Series:

Materials Science and Engineering

390 (2018)012002

doi:10.1088/1757-

899X/390/1/012002

The 3rd International Conference on

Materials and Manufacturing Engineering

ICMME – 2018 March 8-9, 2018 At

SCSVMV Enathur, Kanchipuram -

631561, Tamilnadu, India

12 Umamaheshwar

Hebbal

Poster Presentation on “Application of nano

fluids as photovoltaic thermal solar collectors”

Christ University, Bangalore Advanced Ceramics and nano

materials for sustainable development

(ACeND-2018)

19-21st

sept

2018.

https://aip.scitation.org/journal/apc

https://aip.scitation.org/toc/apc/1943/1

http://iopscience.iop.org/article/10.1088/1757-899X/310/1/012072/meta

http://iopscience.iop.org/article/10.1088/1757-899X/310/1/012072/meta

JSS MAHAVIDYAPEETHA



Department of Mechanical Engineering

List of Papers published in International Journals

SL. No Name of the

Faculty

Title of the Article Journal/Magazine/

Organizer

Month, Year, Volume

2016-17

1 Dr.B.P.Shivakumar Characterization of mechanical properties of Al/TiCP MMC International journal of

Material Research ISSN: 1862-5282

Volume 108 ,ISSUE.2

Feb 2017. Citation-Nil

2 Dr.B.P.Shivakumar Numerical Analysis of Cold Forging Effect on Mechanical

Properties of Al/Sic Metal Matrix Composites

IOSR Journal of Mechanical

and Civil Engineering (IOSR-

JMCE)

ISSN: 2278-1684

volume 14 ,ISSUE.1,

Jan-Feb 2017. Citation- Nil

3 Siddappa P N Characterization of mechanical properties of Al/TiCP MMC International journal of

Material Research ISSN: 1862-5282

Volume 108 ,ISSUE.2

Feb 2017. Citation-Nil

4 Siddappa P N Numerical Analysis of Cold Forging Effect on Mechanical

Properties of Al/Sic Metal Matrix Composites

IOSR Journal of Mechanical

and Civil Engineering (IOSR-

JMCE)

ISSN: 2278-1684

volume 14 ,ISSUE.1,

Jan-Feb 2017. Citation- Nil

5 Anil kumar K S A bottom –up optimization approach for friction stir welding parameter

of dissimilar AA2024-T351 and AA7075-T651 Alloys

Journal of Materials

Engineering and

Performance

ISSN 1059-9495 DOI

10.1007/s1665-

017-2746-z.May2017

2015-16

1 Prajwal M Experimental investigation to study the thermal performance of a

silicon carbide furnace International Journal of

advance in scientific Research

and Engineering

ISSN,2454-8006,,June

2016, vol.2,issue 05

PP.549-551

2 Santhosh Kumar B

M

Assessment of mechanical properties of aluminium 7075based metal

matrix composite

International Journal of

Engineering Research and

Technology

ISSN,2278-0181,,Feb

2016, vol.5,issue 02

PP.549-551


SL. No Name of the

Faculty


Organizer

Month, Year, Volume

3 K M Nataraj Development of cooling and cleaning systems for enhanced gas

quality for 3.7kw gasifier –engine integrated system International Journal of

Engineering, science and

Technology

ISSN,2141-2839,Feb

vol.8,No 1,2016

PP.43-56

4 Siddappa P N Design and Development of Manually Operated Multipurpose Bi- Piston Hydraulic Press

Glacier Journal of Scientific Research

ISSN2349-8498, Nov 2015, vol.1

5 Dr.Gowreesh Heat transfer enhancement in a double pipe heat exchanger using CFD International Journal of

Engineering, and

Technology

p-ISSN: 2395-0072

e-ISSN: 2395-0056 volume ,2 ,ISSUE.09

6 Dr.Gowreesh CFD analysis of a single phase mixing of fluids without the aid of

stirrers


Engineering, and

Technology

p-ISSN: 2395-0072

e-ISSN: 2395-0056

volume ,2 ,ISSUE.09

Dec 2015

7 Dr.Gowreesh Design and analysis of a multi cylinder four stroke engine exhaust

manifold using CFD Technique


Engineering, and

Technology

p-ISSN: 2395-0072

e-ISSN: 2395-0056

volume ,2 ,ISSUE.09

Dec 2015

8 Devappa Design and Fabrication of Metal Chips Compactor International Journal of

Informative & Futuristic

Research

ISSN2317-1697, vol-3

Issue-2 Oct 2015

9 G M Swamy Design and Fabrication of Metal Chips Compactor International Journal of


Research

ISSN2317-1697, vol-3

Issue-2 Oct 2015

10 Nagaraja T.K. Fuel Flexibility in Solid Oxide Fuel Cell- A Review Indian Journal of Scientific

Research NCRIET-15

/180/V12/N1/Nov/15

11 G.M.SWAMY “ Application of Processed Blast Furnace Slag as Fine Aggregation and

Plastering “


Innavative Research in

Science ,Engineering and

Technology

IJIRSET,

ISSN : 2347 -6710

ISS ONLINE :2319-

8753

volume ,issue ,

Nov 2015

impact factor;5.442

12 Anil kumar K S Optimization of FSW parameters to improve the mechanical properties of AA2024-T351 similar joints using taguchi method

Journal of Mechanical ,Engineering and

Automation

p-ISSN: 2163-2405

e-ISSN: 2163-2413 volume ,5(3B) ,

Oct 2015

13 J S Srikantamurthy Condition based monitoring in machine tool using different techniques and optimiztion of process



Research

ISSN 2317-1697, vol-2

Issue-12 AUG

2015

14 G.M.SWAMY Tool wear Monitoring in drilling mild steel using acoustic emission and

surface roughness techniques and optimization of process parameters


informative and Research in

Science ,Engineering and

Technology

ISSN : 2347 -1697

Volume 2 ,issue 10,

June 2015

impact factor;5.442

SL. No Name of the

Faculty


Organizer

Month, Year, Volume

15 Devappa Studies on the effect of minor addition of Sr and Mg on the micro

structure and mechanicalproperties of A413 Alloy International Journal of

Engineering Research &

Technology

ISSN: 2278-0181

www.ijert.org Vol. 4

Issue 04,June -2015

16 Dr.B P Shivakumar Effect of Forging condition on Mechanical Properties of Al/SiC Metal

Matrix Composites International Journal of

Engineering Research &

Technology (IJERT)

ISSN: 2278-0181

www.ijert.org Vol. 4

Issue 05, May-2015

17 K M Nataraj Effect of turbo charging on the performance of dual fuel (DF)

engine operated on rice oil methyl ester (RBOME) and coconut shell

derived producer gas induction

Petroleum and

environmental

biotechnology

ISSN:2157-7463

Volume 6, Issue. 4

may, 2015|,pp 01-08

18 G M Swamy AThermoelctric generator systems for waste heat recovery-Areview International Journal of

Engineering research and

technology

19 K M Nataraj Effect of turbo charging on the performance of dual fuel (DF) engine

operated on rice oil methyl ester (RBOME) and coconut shell derived

producer gas induction

Petroleum and environmental

biotechnology

ISSN:2157-7463

Volume 6, Issue. 3

April, 2015|,pp 01-07

20 H Prakash . Design and implementation of microcontroller based technology for

automatic control of braking system in vehicles


advance research in Science

and Engineering

ISSN: 2319-8354

Volume 4, Issue 1

March , 2015|,pp 241-

248

21 Dr. B V

Ragahavendra

Solving Travelling Salesmen Problem using Ant Colony

Optimization Algorithm

Journal of Information

Sciences and Computing

Technologies

ISSN: 2394-9066

Volume 3, Issue 2 November 2014|,pp

131-133

22 Venkatesh.B n Preliminary studies on mechanical and metallurgical behavior of friction

stir welded butt joints Elsevier /sciencedirect ISSN: 2319-300x

Volume 3, Issue 1

oct, 2014|,pp 847-853

23 Devappa Study on effects of minor addition of cu and B to Al -12Si Base Alloy Research revolution ISSN: 2394-9066

Volume 3, Issue 1

March 30, 2015|,pp

170-179

24 G.M Swamy Conversion of petrol engine for two wheeler vehicles Research revolution ISSN: 2319-5991

Volume 3, Issue 1

March 30, 2015|,pp

170-179

25 K M Nataraja Effect of carburetor type and injection strategies on the performance of

rome and coconut shell derived proceder gas fueled dual fuel engine

Inernatioal jounal of

engineering research and

science and technology

ISSN: 2394-9066

Volume 3, Issue 1

March 30, 2015|,pp

170-179

26 Nagaraja T K Reducing manufacturing lead of steam turbine casing IJRET-International journal of

research in Engg and

technology

ISSN 2319-1163 Vol 3

sp. Issue 3,3 and 4th

May 2014

http://www.ijert.org/

http://www.ijert.org/

SL. No Name of the

Faculty


Organizer

Month, Year, Volume

27 H.Prakash An investigation to study the effect of drilling process parameters on

surface finish using taguchi method International journal of

mechanical Engineering

and robotics research

ISSN 2278-0149

VOL,3,No. 2, April

2014

28 Nagaraja T K An investigation to study the effect of drilling process parameters on

surface finish using taguchi method International journal of

mechanical Engineering and

robotics research

ISSN 2278-0149

VOL,3,No. 2, April

2014

29 M. Mruthunjaya Sliding wear behavior of alumina/Tic coated steel produced by plasma spray technique

International journal of industrial Engineering and

management science

ISSN 2277-5054

VOL,4,No. 1, February

2014

30 M. Mruthunjaya Microstructural study and tribological behavior of WC-Co Coatings on

stainless steel Produced by HVOF Spray technique International journal of


and technology

ISSN 2277-5054

VOL,5,issue. 1, January

2014,pp.132-139 2013-14

M. Mruthunjaya Microstructural study and tribological behavior of WC-Co Coatings on stainless steel Produced by HVOF Spray technique

International journal of mechanical Engineering and technology

ISSN 2277-5054

VOL,5,issue. 1, January 2014,pp.132-139

1 K.M.Nataraj Honge oil methyl ester and producer gas- fuelled dual- fuel engine operated with varying compression rations

International journal of Sustainable Engineering

Published on line:16.oct 2013

2012-13

1 B.V. Raghavendra A Case Study to Setup Optimum Process Parameters in Thermal

Deburring for Removing the Burr in Barrel of Fuel Injector Pump Using Taguchi Approach.

IOSR Journal of

Engineering (IOSRJEN)

Volume 2, Issue 9th

September , 2012, PP 26-35

2011-12

1 B.V. Raghavendra Job sequence in a batch production shop to minimize the workload

imbalance on parallel machine through genetic algorithm.


Engineering Science and Technology

(ISSN 0975 - 5462),

Vol. 3, Issue 1, 2011, pp 204 - 210.

2 B.V. Raghavendra Workload balancing in identical parallel machine scheduling while planning in flexible manufacturing system using genetic algorithm. ARPN journal of engineering and applied sciences

International Journal of Engineering Science and Technology

(ISSN:1819-6608), Vol. 6, No 1 January- 2011

3 B.V. Raghavendra Some solution approaches to reduce the imbalance of workload in

parallel machines while planning in flexible manufacturing system.

International journal of engineering science and technology.


Engineering Science and

Technology

ISSN:0975-5462, Vol.

2 724-730,2010

4 B.V. Raghavendra Heuristic solution approaches for minimize the unbalance of the

machine processing time between the set-up on parallel machine in

flexible manufacturing system. International journal of engineering

research and technology.


Engineering Science and Technology

ISSN: 0974 - 3154, Vol. 3, No. 3, pp 379- 387,2010

5

B.V. Raghavendra Some solution approaches to reduce the imbalance of workload in

parallel machines while planning in flexible manufacturing system

through genetic algorithm. International journal of industrial engineering and technology.


Engineering Science and

Technology

ISSN: 0974 – 3146,

Vol. 2, No 1.

313-324 2010

6 Dr. Shankargoud Nyamannavar

Experimental Models for Assessment of Interfacial Heat Transfer in Dip Soldering

Advanced Materials Research

2010, 83-86, PP 1228- 1235

SL. No Name of the

Faculty


Organizer

Month, Year, Volume


Thermal Contact at Solder/Substrate Interfaces during Solidification Materials Science and Technology

2009, 25 (6) PP 707-710

8 B.V.Raghavendra

A Review of Different Approaches to the Maximum Utilization of Resources in FMS

Velammal Engineering College, Chennai

19th to 21

st of March

2009.

9 Dr. A.R.Annigeri Free Vibration behavior of Multiphase and Layered Magneto- ELASTIC beam

Journal of sound and Vibration

299(1-2)44-63


Constitutional Undercooling And Growth of Globuletic Particle 68th

world foundry congress -2007 World Foundrymen Organisation

7th to 11

th Feb, 2007

Chennai

11 Dr. A.R.Annigeri Free Vibration Studies of Simply Supported Layered And

Multiphase Magneto-Electro-Elastic Cylindrical Shells

Journal of sound and

Vibration 292 (1-2), 300-314. 2006

12 Dr. A. R. Annigeri Free Vibrations of Clamped-Clamped Magneto-Electro-Elastic Cylindrical Shells, Journal of Sound

Journal of Sound and Vibration,

15pp. 459-467, 2006

13

Yogesha K B

Tribological behaviour of Austempered Chilled Ductile Iron(ACDI)"

International Journal of Material Sciences and Technology (IJMST),

ISSN 2249-3077 Volume No. : 4 Issue :2,2013 Page Nos. : 77-89

14

Yogesha K B

Development of Austempered chilled ductile iron (ACDI) and

evaluation of mechanical properties


Materials science (IJoMS) ISSN : 0973-4589 Volume No. :8 Issue:1,January 2013 Page Nos. : 1-12

2015-16

Sl

No

Name Title of the paper Organizing institution Name of the conference Date

1

Siddappa P N

Characterization of

mechanical Properties of

Al/TiC MMC

KPR institute of engineering and

technology

Dept of Mech Engg, Coimbatore

International Conference

onTechnological Advancements in

Materials and

Manufacturing for Industrial

Environment

4th and 5th March

2016

2

Dr.B. P. Shivakumar

Characterization of

mechanical Properties of

Al/TiC MMC

KPR institute of engineering and technology




Materials and

Manufacturing for Industrial Environment

4th and 5th March

2016

3

Yogesha. K B Development and property evaluation of chilled aluminium

LM 20 alloy reinforced with Al2 O3

KPR institute of engineering and

technology




Materials and Manufacturing for Industrial

Environment

4th and 5th March

2016

4

Dr.Gowrish subramany

.S

Numerical Analysis of thermal and residual stresses in a concentric

welded

tube

United group of institutions Geated Noida

International Conference on research and innovative in engineering 2016

12-13 Feb 2016

5

Veeresh B R

Numerical Analysis of thermal and

residual stresses in a concentric

welded tube



12-13 Feb 2016

6

Srikantamurthy J S

Numerical Analysis of thermal and

residual stresses in a concentric

welded tube



12-13 Feb 2016

2014-15

1

G M Swamy

Experimental investigation and

analysis of twist drill, milling cutter

and single point cutting tool using AE, Vibration

and sound analysis techniques

Kalaignar karunanidhi institute of

technology ,Coimbatore

International conference on innovative

research technique in management,

aeronautical,

management and electrical system

12-13 Feb 2015

2

Anil kumar.K S Wear analysis of single point insert using force ,vibration and acoustic

emission technique

Kalaignar karunanidhi institute of

technology ,Coimbatore

International conference on innovative

research technique in management,

aeronautical,

management and electrical system

12-13 Feb 2015

3

Dr.

Shankargoud

Nyamannavar

CFD Analysis of an Rc Aircraft Wing IRAJ Research forum, institute of research and journals

International conference on

computer science and Mechanical

Engg

27th july,2014

4 Suresh Holi Design and 3D Modeling of vertical

take off and Landing

IRAJ Research forum,institute

of research and journals

International Research conference on

computer science, Mechanical Engg

4,May,2014

5

M.Mritunjaya Design and fabrication of a 3 wheeled wheelchair Prototype

IRAJ Research forum,institute of research and journals

International Research conference

on computer science and

Mechanical Engg

4,May,2014

6

J S Srikantamurthy

Performance analysis of 4 stroke diesel engine using mahua bio fuel

IRAJ Research forum,institute of research and journals

International Research conference on

computer science and

Mechanical Engg

4,May,2014

2013-14

1

Nagaraja T.K Optimization of drilling process parameters for surface finish in drilled

holes using Robust Design

Advances and Development in

Engineering, Malwa

Institution of Technology,

Indore, M.P

Advances

and

Engineering.

Development

in

8th-9th , Feb 2013

2

H. Prakash Optimization of drilling process parameters for surface finish in drilled

holes using Robust Design

Advances and Development in

Engineering, Malwa

Institution of Technology,

Indore, M.P

Advances

and

Engineering.

Development

in

8th-9th , Feb 2013

2012-13

2011-12

1

Yogesha K B

The solidification and mechanical properties of

austempered chilled

ductile iron (ACDI)

International Conference on “ICCOMIM-2012

At MSRIT, Bangalore On 11th July to

13th July 2012

2010-11

1

Yogesha K B

Effect of chills on Mechanical

Properties of Austempered Ductile

Iron

International Conference on

Advanced Matreilas-2011, ICAM

2011

BTL Institute of Technology,

Bangalore

19th August 2011 to

20th August 2011.

2

Dr. B.P.Shivakumar

Review on analytical methods used

for the evaluation of Thermal

Expansion Behavior of AI/SiCp MMC

system.

Siddaganga Institute

Technology, Tumkur, of Proc. of international conference on

advanced materials, Manufacturing,

Management and Thermal Sciences

“AMMMT – 2010”

18-19 Nov. 2010

3

Devappa

Characterization of particle

polymer matrix Composites

Structural Applications filled

Siddaganga Institute of

Technology, Tumkur

Proc. Of international conference on



“AMMMT – 2010”

18th -19th

Nov. 2010

4

M.Mritunjaya

Behavior of thermal sprayed tungsten

carbide coatings on mild steel

AMMMT - 2010

Siddaganga Institute of

Technology, Tumkur

Proc. Of international conference on



“AMMMT – 2010”

18th-19th

Nov. 2010

2009-10

1 Dr.

Shankargoud

Nyamannavar

Solidification and Heat Flux

Transients in Dip Soldering Process,

Proc

Saudi Aramco & King Fahd

University of Petroleum &

Minerals

Advanced Materials and Processing

Technology (AMPT-2008). 2-5,

Nov 2008

2nd-5th Nov. 2008

2

Dr. Shankargoud

Nyamannavar

Constitutional Undercooling And Growth of Globuletic Particle 68th world foundry

congress -2007

World Foundrymen

Organization 68th world foundry congress -2007 7th to 11th Feb, 2007

Chennai

3 Dr. B.P.Shivakumar A critical review of analytical methods used

for the evaluation of Coefficient of Thermal

Expansion of particulate

reinforced Composite Materials

Coimbatore Institute of

Technology, Coimbatore

Proc. of International conference on

Global Manufacturing and Innovation

“GMI 2006

27th-29th, July

2006

4 Dr. B.P.Shivakumar Effect of temperature on mechanical

and thermal properties of Ti-64/SiCf

MMC system with varying volume

fraction - an FEM investigation

St. Joseph College Of Engg.,

Chennai.

Thermal Engg., Competitive

manufacturing and Management,

“TECM-2006”

1st Feb. 2006

5

Dr. .A. R. Annigeri

Free Vibration Response of Multiphase

Magneto-Electro-Elastic Plates by

Finite Element Method

International Congress on Sound

and Vibration

(ICSV13)

July 2nd-6th, 2006,

Vienna, Austria

6 Dr. Shankargoud

Nyamannavar Microstructure Evolution in Al-7Ai-

0.3Mg alloy during Partial Melting and

Solidification from Melt: A Comparison

World Foundrymen

Organization 67th World Foundry Congress

Harrogate, United Kingdom 4-8

June, 2006

4th -8th June, 2006

7 Dr. Shankargoud

Nyamannavar

Effect of Cooling Rate During Cooling

From Semi Solid State on the

Microstructure of Sr Modified Al-7Si-

0.3Mg Alloy Containing 1%Fe Impurity

IIT-Kharagpur

ICAMMP-2006

3-5 February

2006

List of Papers published in National Conferences

SL. No

Name of the

Faculty


Organizer

Name of Programme Date

1

Nagaraja T.K. Fuel Flexibility in Solid Oxide Fuel Cell- A Review Bheemanna Khandre

Institute of Technology,

Bhalki

Recent Innovations in

Engineering and Technology

NCRIET-2015

7th and 8th Nov 2015

2 Anil kumar K S Optimization of FSW parameters to improve the

mechanical properties of AA2024-T351 similar joints using taguchi method

ST. Joseph engineering

college, Mangaluru

Emerging trends in


07.08 2015

To 08.08.2015

3 Venkates. B N Mechanical properties of friction stir welding aa 6061

composites containing SiC

VTU ,Regional center,

Mysuru

Trends and innovation in

automation, Material and thermal engineering,(TIAMTE-2015)

21.05.2015 To 22.05.2015

4 Nagaraja.T K An investigation of reconditioning and development

of wear and friction testing machine

VTU ,Regional center,

Mysuru

Trends and innovation in

automation, Material and thermal engineering,(TIAMTE-2015)

21.05.2015 To

22.05.2015

5 H Prakash . Design and implementation of microcontroller based

technology for automatic control of braking system in vehicles

Jawaharlal Nehru

university, new dhlhi


advance research in Science and Engineering

25/03/2015

6 Devappa Studies on effect of minor addition of Cu,and B to to

Al-12Sibase alloy

JSSATE, IEM national conference on

emerging trends in

engineering and management

06.11.2014

TO

07.11.2014

8 M.Mrithunjaya Design and fabrication of a 3- wheeled wheelchair

prototype

IRAJ Research forum 5th SARC-IRF international

conference, Bangalore

4TH

may 2014

9 T.K.Nagaraja Reducing manufacturing lead time of steam turbine casing

IJRET Journal/ National conference on recent

innovations in engineering and technology-2014

3rd

and 4th May

2014,vol,3,special issue 3;may 2014

10 Devappa

Studies on effect of minor addition of Cu,Mg and Sr to Al-12Sibase alloy

4th,5

th.May 2013

11 Devappa

A Study on effects of minor additions of Ti,B& Al- 12SiBase alloy

4th,5

th.May 2013

12 Suresh Holi Designing a die to manufacture non-conductive bus bar junction of sheet molding composite material

East West Institute of Technology, Bangalore

DOCAM 18-19 May, 2012

13 K.S Anil kumar Design and Development of one way Clutch for Two wheeler application

Developments and Opportunities in Civil

Engineering, Applied

Sciences and Mechanical Engineering.

18th,&19

th May

2012

EWIT B.lore

14 Suresh Holi Design & Validation of Pressure Compensated Flow

Control Valve with Bypass Check Valve for Oil Hydraulic Applications.

PDA College of

Engineering, Gulbarga

RAME III-2012 20-22 Sept., 2012

15 B.N. Venkatesh

Experimental Study on Mechanical properties of

AA7005/Al203 MMC’S

Don Bosco Insititute of

technology, Bangalore,

National conference on

Developments in Composites

Materials and processes “DCMP”

April 7th to 9

th ,

2011

16 Yogesha K B

Chilling Effect on Mechanical Properties of Al-12 %

Si based MMC’S reinforced with Aluminum oxide at SBM Jain College of Engineering, Bangalore

on 28th Aug 2010.

17 Yogesha K B

Effect of Volume Fraction of AL2 O3 Reinforcement

on Mechanical and Tribological Properties of Al-Si

alloy Basses MMC

National Conference on

Advanced Forming

Technologies (AFT- 2010)

at R.V. College of

Engineering, Bangalore on 15-16 April 2010.

18 Yogesha K B

Free Vibration Analysis of a Space craft Structure

using FEM

poster session of

NATCON-ME-2005

Ghousia College oF Engg.,

Ramanagaram-571511. on 11 – 12th March 2005

19

Yogesha K B A Simple System for Production of Distilled Water Recent trends in energy

Engineering at National Engineering College, K.R. Nagar, Kovilpatti, Tamil Nadu

on 11th &12th oct, 2003. pp-06-10

JSS MAHAVIDYAPEETHA JSS ACADEMY OF TECHNICAL...

Documents

Transcript of JSS MAHAVIDYAPEETHA JSS ACADEMY OF TECHNICAL...