Introduction to AutoCAD 2010 -...

Introduction to AutoCAD 2010Alf Yarwood

Chapter 19 Exercise 11. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop.2. Open the template acadiso3D.dwt.3. Change the colour in layer 0 to magenta.4. In the ViewCube/Right view construct a pline to the shape of the end view of one of the end plates and

extrude to a height of 19. Subtract the diameter 10 holes from the extrusion.5. Construct two cylinders central to the plate, one of R40 and height 40 and the other of R50 and height 40,

and subtract the smaller from the larger.6. Make the layer Construction current and construct two cylinders, one of radius 40 and height 40, the other

of radius 50 and height 250.7. In the ViewCube/Front view move the cylinders to form the boss at the ends. Copy one cylinder to the end

of the 250 long cylinder. Move the three cylinders bringing the spindle into position. Form a union of the twoparts of the end. Form another union of the three parts of the roller. Copy the end to form the other end of theholders.

8. Place in the ViewCube/Isometric view.9. Shade the model in the Realistic visual style.10. In the ViewCube/Top view add lighting and attach materials to the parts of the model.11. Place in the ViewCube/Isometric view and render.12. Save to a floppy disk with the file name 19_Exercise02.dwg.13. Close the drawing window.

Material accompanying Introduction to AutoCAD 2010, ISBN 978-1-85617-868-6. Copyright © 2009, AlfYarwood. Published by Elsevier Ltd. All rights reserved

Chapter 19 Exercise 21. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop.2. Open the template acadiso3D.dwt.3. Make three new layers: Clamp (blue);

Rod (red); Vblock (magenta).4. Make layer Clamp current.5. In the ViewCube/Top view construct

two pline outlines for the body of theclamp.

6. Extrude the larger to a height of 4 andthe smaller to a height of 10.

7. Move the smaller extrusion to lie in itscorrect place in the larger.

8. Form a union of the two extrusions.9. Place in ViewCube/Isometric.10. Change to the Realistic visual style.

11. In the ViewCube/Front view constructtwo plines, one for the cylinder and anotherfor the screw thread from which solids ofrevolution can be constructed for the cylinderand its screw thread at the top of the clamp.

12. In the ViewCube/Isometric view, form aunion between the cylinder and the clamp andsubtract the screw thread from the union.Change to a Realistic visual style.

Material accompanying Introduction to AutoCAD 2010, ISBN 978-1-85617-868-6. Copyright © 2009, AlfYarwood. Published by Elsevier Ltd. All rights reserved

13. Still in the Clamp layer, construct a pline for a solid of revo-lution for the clamp screw and using the Revolve tool from theHome 3D Modeling panel form the screw.14. Add the pin for the clamp screw.

15. Make layer Vblocks current and in the ViewCube/Front viewconstruct a pline outline for one of the a blocks. Extrude to aheight of 150.

16. Copy the vblock to form the second of a pair.17. Copy the clamp to form the second clamp and move both clamps

to suitable positions in relation to the vblocks in the ViewCube/Top view.

18. Place in the ViewCube/Isometric view and in the Realisticvisual style.

.

Material accompanying Introduction to AutoCAD 2010, ISBN 978-1-85617-868-6. Copyright © 2009, AlfYarwood. Published by Elsevier Ltd. All rights reserved.

19. Add suitable lighting to the scene and attachsuitable materials to the various parts of the modeland render.

.

20. Save the model to the file name19_Exercise02.dwg in a floppy disk.

17. Close the drawing window.

Chapter 19 Exercise 31. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop.2. Open the template acadiso3D.dwt.

Note In this exercise instead of setting views by using the ViewCube, views will be set from thedrop-down menu from the Home/View panel. As a start the AutoCAD window is set in theFront view from this drop-down menu.

3. In the Front view construct a pline indicating the central line of the front view as shownin Fig. 19.18.

4. In the Right view construct two circles of diameters 85 and 95 at the end of the centralline.

5. Theuppermost illustration on the next page shows the centre line and the circles in theSouthwest Isometric view.

6. With the Extrude tool from the Home/ 3D Modeling panel extrude the circles long the path of the centralline. Subtract the smaller extrusion from the larger.

7. In the Top view construct two cylinders of diameters 85 and 95 and subtract the smaller from the larger.Form a union between this union and the first part of the model.


8. In the Top view construct a pline outline of one of theflanges and extrude to a height of 10. Subtract the15 diameter holes from the extrusion.

9. In the Top view copy the flange three times to theirpositions relative the model so far.

10. In the Top view, construct four cylinders of diameters85 and 95, the first of height 10, the other three of height117.5. The first at the centre of the first flange, the othersat the centres of the other three flanges. Form a union ofthe flanges, the larger cylinders and the main model. Thensubtract the smaller cylinders from the model.

.

11. Place in the Southeast Isometric view. Add lighting,attach a suitable material and render.


Chapter 19 Exercise 41. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop.2. Open the template acadiso3D.dwt.

3. Make five new layers - Layer1 (red), Layer2 (blue), Layer3 (magenta), Layer4 (green) and Layer5(cyan).

4. Construct the body on Layer1, the cylinder on Layer2, the flange on Layer3, the pin on Layer4 and thebolts on Layer5 working on the Top, the Right and the Left views.

A Realistic visual shading the model is shown above.5. Shade in the 3D Hidden visual style.6. Save the drawing to the file name 19_Exercise04.dwg in a floppy disk.7. Close the drawing window


Chapter 19 Exercise 51. Open AutoCAD 2010 with a double-click on its

shortcut icon in the Windows desktop.2. Open the template acadiso3D.dwt.

3. Set ISOLINES to 16.4. Make Layer1 current and in the UCS RIGHT

construct the left-hand handle.5. On Layer2 construct one of the hanging brackets

partly in the Right view and partly in the Top view.6. On Layer3 construct the spindle.7. On Layer4 construct the right-hand pointer.

8. Realistic shade the model.

9. At the command line enter u (Undo)and the drawing reverts to its unshadedstate.

10. In the UCS WORLD separate theparts and when separated place in theSouthwest Isometric view.

11. Place in the UCS WORLD and addlighting.

12. Place in the Southwest Isometric view and add materials.13. Render the model (see next page)14. Save to the file name 19_Exercise06.dwg in a floppy disk.15. Close the drawing window.


Chapter 19 Exercise 61. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop.2. Open the template acadiso3D.dwt.3. Set ISOLINES to 16.4. In the Front view construct plines for solids of revolution for all three parts of the model - the main body and

the screwed hole in the main body on Layer1, the handle on Layer2 and the pin on Layer3.5. Construct the solids of revolution with the Revolve tool.


6. Move the screwed hole solid into itsposition in relation to the main body.Check in the Right view that it iscorrectly placed and subtract it from themain body. Make the Layer3 current andconstruct the hexagonal extrusion for thehead of the bolt.

7. While in the Right view construct a boxfor the keyway in the main body onLayer1. Check in the Front view that itis in the correct position and subtract fromthe main body. On Layer3 move thehexagonal extrusion for the bolt into placeand subtract it from the bolt.

8. Shade in the Conceptual visual style.

9. Undo the shading and place the drawing inthe UCS WORLD. Move the parts of the assembly to fittogether.

10. While in the UCS WORLD add lighting.11. Attach materials to the parts of the assembly.12. Render the model.13. Save the model with a file name 19_Exercise07.dwg in a

floppy disk.14. Close the drawing window.


Additional exercises

1. Working to the details given in the two-viewprojection below construct the 3D solid modeldrawing as indicated in the illustration to the right.Add suitable lighting and materials and render yourmodel.

2. An exploded orthographic projection is given below showing details of the rendered exploded assembly of partof a valve from a machine. Construct the 3D models needed for each of the parts of the assembly, addsuitable materials and lighting and render your model.


3. The 3D solid model drawing shown to the right has been constructedfollowing the procedures outlined in the four views given below.

Working to suitable dimensions construct each of the 3D modelsas shown in the drawings below and when Stage 4 has beencompleted add a column to support the assembled parts.

When the 3D solid model has been completed attach a suitablematerial, add lighting and render your model.


Multiple choice questions1. The Solprof tool is used for the following purpose:

(a) To produce a profile for a 3D solid model drawing in a database(b) To produce an outline-only drawing from a 3D solid model drawing(c) To provide a profile similar to a front view from a 3D solid model drawing(d) To change a 3D solid model drawing from a Model Space drawing to a Paper Space drawing.

2. A polygonal viewport can be constructed in a Model Space viewport:(a) This is not true. A polygonal viewport can only be constructed in Paper Space viewports(b) Yes. A polygonal viewport can be constructed in either Model Space or Paper Space(c) Yes. A polygonal viewport can be constructed in Model Space by clicking the MODEL button whenin paper Space(d) Yes providing there is only a single viewport on screen

3. A drawing can only be printed or plotted from a Paper Space drawing:(a) This is correct(b) Yes - providing the MODEL button has been clicked(c) Drawings can be printed or plotted from either Model Space or Paper Space(d) Drawings can only be printed from Paper Space, but plotted only from Model Space

4. A file name with the following extension shows that the file is a raster file:(a) *.dwg(b) *.dwt(c) *.bmp(d) *.dxf

5. When a photograph has been inserted in an AutoCAD drawing on screen and the drawing is printed orplotted, the photograph does not print or plot with the drawing:

(a). This is correct(b). This is not true. The photograph will print or plot along with the drawing(c). This is true only if the photograph was inserted in a drawing in paper Space(d). This is true only if the photograph was inserted in a drawing in Model Space


Introduction to AutoCAD 2010 -...

Documents

Transcript of Introduction to AutoCAD 2010 -...