Installation Instructions - OWT Timber Bolts (56649-52)
8
OWT Timber Bolts installed shown with 56637 Post to Beam Bolt Inline connector dato cut required dato cut required Timber Bolts may be installed as standalone fastener or with many OZCO connector options 1 Installation Instructions, OWT Timber Bolts V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information Installation Instructions, OWT Timber Bolts
-
Upload
ozco-building-products -
Category
Documents
-
view
223 -
download
2
description
OWT Timber Bolts combines the beauty of the OWT Hex Cap Nut and Timber Screw with the strength of a thru-bolted connection. These bolts are engineered to replace standard thread-all, carriage or other similar through bolt arrangement. OWT Timber Bolts are especially designed to work in conjunction with Ornamental Wood Ties and connectors but are also very useful in any location where a strong bolt connection is required. This bolt features our patent-pending “inside - out” compression technology. OWT Bolts are currently offered in 4 sizes that together will connect material from any size between 4 in. - 12 in.
Transcript of Installation Instructions - OWT Timber Bolts (56649-52)
OWT Timber Bolts installed
shown with 56637 Post to Beam Bolt Inline connector
dato cut required
dato cut required
Timber Bolts may be installed as standalone fastener or with many
OZCO connector options
1
Installation Instructions,OWT Timber Bolts
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, OWT Timber Bolts
[101-152] 4-6"
Assembly, OWT Timber Bolt 4-6"56649-10
[152-203] 6-8"
Assembly, OWT Timber Bolt 6-8"56650-10
[203-254] 8-10"
Assembly, OWT Timber Bolt 8-10"56651-10
[254-304] 10-12"
Assembly, OWT Timber Bolt 10-12"56652-10
.375
5/16" clearance
hole
3/4" clearance
hole
19.05.75
15.88.63
38.101.50
25.401.00
15.24.60
OZCOV1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, OWT Timber Bolts 2
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, OWT Timber Bolts
Suggested Tools(others may be required)
3
mark locations
plate temporarily installed
for installations without post to beam connector, proceed to next step
step 1V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, OWT Timber Bolts 4
plate from step 1 removed
secure as desired
beam can be nailed/screwed in place(instead of clamped) in area covered by plate shown in step 1
pencil marks
step 2V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, OWT Timber Bolts 5
3/4drill through
beam & post"
installation example without post to beam
connector
step 3V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, OWT Timber Bolts 6
adjust as necessary before installation
repeat on opposite side
installation example without post to beam
connectorstep 4V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, OWT Timber Bolts 7
Tool Required3/8" Driver
(Hex Cap Nut)provided
install caps finger tight; both sidesDO NOT USE POWER DRIVER
3/8" Driver
cutaway view
step 5V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, OWT Timber Bolts 8
