How to Make Stamped Chandelier Pearl Earrings DIY Jewelry Making Tutorial
How to Make Bright Fun Earrings DIY Jewelry Making Tutorial
-
Upload
houseofgemscom -
Category
Design
-
view
111 -
download
4
Transcript of How to Make Bright Fun Earrings DIY Jewelry Making Tutorial
How To Make: Bright Fun Earrings
Materials: 9” of 20 gauge copper Wire cut into 2 even piece, 2 copper beads – size 2 mm, 2 copper beads – size 3 mm, 2 stone beads - size 8 mm, 2 stone beads – size 12 mm, 6 beadcaps, pair of earwires
Tools: Round Nose Pliers, Wire Cutters
Step 1: Create small loop at the end of the wire
Step 2: Bend wire as shown in the photo and insert a bead
Step 3: Create 2 small loops as shown in the photo
Step 4: Create 3 rd , bigger loop and bend wire up (it should be located between 2 small loops)
Step 5: Insert the bead, bead caps and copper beads
Step 6: Create a loop, trim the wire if you need to and close the shape to create final loop. Repeat all the steps to create second earring. Now attach earwires. Your earrings are ready to wear!