How to Make Delightful Dangle Earrings DIY Jewelry Making Tutorial
-
Upload
houseofgemscom -
Category
Design
-
view
202 -
download
5
Transcript of How to Make Delightful Dangle Earrings DIY Jewelry Making Tutorial
How To Make: Delightful Dangle Earrings
Materials: 12 Inches of 20 Gauge Copper Wire cut into 2 even pieces, 12 Glass Beads – Size 2-3 mm, Pair of Earwires
Tools: Round Nose Pliers, Wire Cutters
Step 1: Insert 1 Glass Bead onto the wire and create a loop with the bead inside it
Step 2: Insert second bead, then wrap wire around it. Repeat this step with third bead
Step 3: Bend wires as shown in the photo
Step 4: Insert another bead, then wrap wire around it. Repeat the steps with fifth bead
Step 5: Shape wires as shown in the photo, then insert glass bead onto both wires
Step 6: Wrap wire around the bead then around the second wire. Trim if you need to and smooth the edge
Step 7: Create final loop, wrap wire around the bottom of the loop then trim it and smooth the edge
Step 8: Repeat all steps to create second earring, then attach earwires. Your earrings are ready to wear!