HL7 V2.4 Style Guide€¦ · Web viewThis Style Guide assumes the use of MS Word 97 SR-2 or a...

1.HL7 V2.5 Style Guide

Co-Chair: Helen StevensMcKesson HBOC

Co-Chair: Klaus D. VeilHL7S&S

Editor: Frank OemigKIS Laufenberg GmbH & Co. KG

1.1 STYLE GUIDE CONTENTS

1.1 STYLE GUIDE CONTENTS..................................................................................................................1-1

1.2 PURPOSE.............................................................................................................................................1-4

1.3 GENERAL RULES...............................................................................................................................1-41.3.1 Exceptions....................................................................................................................................................................1-4

1.3.2 General Specifications and Settings..........................................................................................................................1-4

1.3.3 Heading Capitalization...............................................................................................................................................1-5

1.3.4 Enabling Macros.........................................................................................................................................................1-5

1.4 DOCUMENT STRUCTURE...................................................................................................................1-61.4.1 Introductory Page.......................................................................................................................................................1-6

1.4.2 Table of Contents........................................................................................................................................................1-6

1.4.3 Statement of Purpose..................................................................................................................................................1-7

1.4.4 Notes to Balloters........................................................................................................................................................1-7

1.4.5 Preparing documents for publishing.........................................................................................................................1-7

1.4.6 Event/Message and Segment Definition....................................................................................................................1-8

1.4.7 Field Definitions..........................................................................................................................................................1-8

1.5 DOCUMENT PROPERTIES...................................................................................................................1-8

Health Level Seven, Version 2.5 © 2001. All rights reserved Draft 22 November 2001

Chapter 1: HL7 V2.5 Style Guide

1.6 FORMATTING.....................................................................................................................................1-81.6.1 Text Indentation..........................................................................................................................................................1-8

1.6.2 Message Definitions.....................................................................................................................................................1-9

1.6.3 Segment Definitions....................................................................................................................................................1-9

1.6.4 Field Definitions........................................................................................................................................................1-10

1.6.5 Components...............................................................................................................................................................1-10

1.6.6 Components (Data type)...........................................................................................................................................1-10

1.6.7 Component Definitions.............................................................................................................................................1-11

1.6.8 Table Definitions.......................................................................................................................................................1-11

1.6.9 Table Value Definitions............................................................................................................................................1-13

1.6.10 References to Data Elements..................................................................................................................................1-13

1.6.11 References to HL7 Tables.......................................................................................................................................1-13

1.6.12 References to User Tables......................................................................................................................................1-13

1.6.13 Notes.........................................................................................................................................................................1-13

1.6.14 Examples..................................................................................................................................................................1-13

1.6.15 Page Headers...........................................................................................................................................................1-14

1.6.16 Page Footers.............................................................................................................................................................1-14

1.6.17 Setting Bookmarks..................................................................................................................................................1-14

1.7 LISTS................................................................................................................................................1-15

1.8 INDEXING.........................................................................................................................................1-151.8.1 Data Types.................................................................................................................................................................1-15

1.8.2 Data Elements............................................................................................................................................................1-16

1.8.3 Segments....................................................................................................................................................................1-16

1.8.4 Attribute Tables........................................................................................................................................................1-16

1.8.5 Events.........................................................................................................................................................................1-16

1.8.6 Tables.........................................................................................................................................................................1-16

1.8.7 Message Types...........................................................................................................................................................1-16

1.9 CONFORMANCE STATEMENTS........................................................................................................1-161.9.1 Distinct Parts of a Conformance Statement...........................................................................................................1-16

Health Level Seven, Version 2.5 © 2001. All rights reservedNovember 2001 Draft 22


1.9.2 Formatting the different parts of a conformance statement with styles..............................................................1-17

1.10 OTHER EDITING TASKS AND ISSUES.......................................................................................1-19

2.1 AUTHORIZED PARAGRAPH STYLES FOR THE HL7-2 TEMPLATE....................................................212.1.1 Style Name Notes..........................................................................................................................................................25

2.1.2 Font................................................................................................................................................................................25

2.1.3 Kern...............................................................................................................................................................................25

2.1.4 Line Spacing..................................................................................................................................................................25

2.1.5 Space Before..................................................................................................................................................................25

2.1.6 Space After....................................................................................................................................................................25

2.1.7 Justification...................................................................................................................................................................25

2.1.8 Other..............................................................................................................................................................................25

2.1.9 Indent.............................................................................................................................................................................25

2.1.10 Tabs..............................................................................................................................................................................25

2.1.11 Base Style.....................................................................................................................................................................25

2.1.12 Style for Following Paragraph..................................................................................................................................25

2.2 AUTHORIZED CHARACTER STYLES FOR THE HL7-2 TEMPLATE....................................................25

2.3 WITHDRAWN STYLES FOR THE HL7-2 TEMPLATE..........................................................................26

2.4 LIST OF NEW STYLES FOR THE CONFORMANCE STATEMENT..........................................................26

2.5 LIST OF COLUMN WIDTHS FOR ALL TABLES.....................................................................................27

2.6 REMARKS.........................................................................................................................................27

2.7 A NOTE ON HTML STYLE SHEETS...........................................................................................27

2.8 FORMATTING MACROS (STYLE FIXER)............................................................................................282.8.1 Enabling Macros...........................................................................................................................................................28

2.8.2 General Remarks..........................................................................................................................................................28

2.8.3 Adjust the properties of the styles...............................................................................................................................28

2.8.4 Format all Tables within the document.....................................................................................................................28

2.8.5 References.....................................................................................................................................................................29



2.8.6 Adjust the numbering of the headings.......................................................................................................................29

2.8.7 Adjust the Number Gallery.........................................................................................................................................29

2.8.8 Delete unused styles......................................................................................................................................................29

2.8.9 Convert message tables into 5 column format...........................................................................................................29

2.8.10 Add 3rd column to tables............................................................................................................................................30

2.8.11 Reformat Message table.............................................................................................................................................30

go What table is this..............................................................................................................................................................30

2.8.13 Goto a specific table...................................................................................................................................................30

2.8.14 Get All Formats..........................................................................................................................................................30

2.8.15 Requirements to run the macros...............................................................................................................................30

2.8.16 Manually Correcting Styles.......................................................................................................................................30

2.8.17 Questions/Errors........................................................................................................................................................31

2.8.18 History (last changes at the end)...............................................................................................................................31

2.9 PROCEDURES.......................................................................................................................................312.9.1 Procedure for Troubleshooting Normal List Alpha..................................................................................................31

2.9.2 Troubleshooting styles that change erratically..........................................................................................................32

2.9.3 Procedure for inserting a picture................................................................................................................................32

2.9.4 Troubleshooting the macro Format All Tables.........................................................................................................33

1.2 PURPOSEThis document describes how HL7 Version 2.5 Chapters should be formatted in order to get a uniform layout, which in turn allows automatic generation of the HL7 V2.5 Database. For the automatic scanning and data extraction processing it is important to maintain consistency across all HL7 chapters.To demonstrate the styles this document uses the same formatting rules.All formatting is set by MS Word “styles”. (The use of a MS Word .DOT template file was found to be too unreliable). A set of macros is available (see the end of this document) to apply the styles to the document.

1.3 GENERAL RULESTo reduce the amount of formatting effort and to allow easy processing of HL7 Chapters no direct formatting should be applied. All necessary formatting shall be done by the help of MS Word “styles”.

1.3.1 ExceptionsOnly a few exceptions are accepted. One is the numbering of the chapter. Others are identified later.

1.3.2 General Specifications and SettingsThis HL7 Style Guide is for HL7 V2.5 documents.



This Style Guide assumes the use of MS Word 97 SR-2 or a later version of MS word (Office 2000, etc.).

Some settings are standard:

The language is American English

Hyphenation is enabled.

Paper orientation is portrait

“Fast saves” are disabled (keeps the documents to a minimum size)

“Templates and Add-Ins automatic updates” is disabled.

1.3.2.1 Page SetupTop margin: 0.4" (1,016 cm)

Bottom margin: 0.5" (1.27 cm)

Left margin: 0.75" (1.905 cm)

Right margin: 0.75" (1.905 cm)

Gutter (for binding): 0.5" (1.27 cm)

Header: 0.6” (1.524 cm)

Footer: 0.6” (1.524 cm)

1.3.2.2 Filename ConventionsThe naming convention for the files is:

Ch<99>.doc for the chapters including a two digit chapter number

Appendix<X>.doc for the appendices including a one character appendix number

This convention is necessary to achieve hyperlinking across the different chapters.

1.3.3 Heading CapitalizationCapitalize the first and last words and all others except articles, prepositions, the to in infinitives and coordinate conjunctions (such as “and”, “but”, “or” and “yet2).

The same should be applied to data elements and segment names.

1.3.4 Enabling MacrosRegarding disabled macros. Word 97 (I don't know about later versions) will (is suppose to ask) if you want to enable/disable macros when you open a document that contains macros. The prompt can be turned on/off by checking/unchecking Macro Virus Protection in the General tab of Tools:Options. But, it you are not getting the prompt, the macros are suppose to be enabled.

You can get to the macros directly (not using the buttons) by going to Tools:Macro:Macros or pressing Alt+F8. The window will list the available macros. If the window is empty, then the macros have been disabled via Word's virus protection: Enable Macro Virus Protection (check it) in Tools:Options:General, then close and re-openthe document and click Enable on the dialog. If the dialog still doesn't show up then get a "fresh" copy of the style guide either re-extract it from the zip or download the zip again. (On the copy that I use I don't get the macro disable dialog, but I do get the dialog when I open a new copy out of the zip file.)



1.4 DOCUMENT STRUCTURE

1.4.1 Introductory PageEvery chapter begins with an introductory page which names the number of the chapter, the name of the chapter and the responsible chairs and editors.

1.4.2 Table of ContentsA Table of Contents appears after the introductory information.

The TOC lists the chapter contents at the Heading 2 and Heading 3 levels.

The TOC is constructed as follows:

1) Select and delete the current TOC.

2) From the Insert menu, select Index and Tables

3) Select the Table of Contents menu.

4) Select “From Template” as the format

5) Show Page Number should be checked

6) Right Align Page Number should be checked

7) Show levels should be set to (WHAT)

8) Tab Leader should be set to “dots”

9) Select the Options menu

10)Etc

Heading 23.2 CHAPTER xx CONTENTS{ VERZEICHNIS \T "Heading 2,1,Heading 3,2,Heading 4,3" }

Another important issue is to move the level down, i.e. make “Heading 2” “TOC 1”.



1.4.3 Statement of PurposeExcept for chapter 2, the first paragraph specifies the purpose of the chapter. The formatting is as follows:

Heading 1 (consists of a soft end of line [SHIIFT+RETURN] and the heading, but is auto-numbered and sets the number "base" for the whole chapter)

3.Patient Administration

Chapter Chair: Freida B. HallErnest & Young

Chapter Chair: Michael HawverEclipsys Corporation

Editor: Klaus D. VeilHL7S&S

3.2 PURPOSE Heading 2

The black horizontal line is built up by a graphical box across the page with 5 mm in height. The list of chairs and the editors is a table with no borderlines. This allows for easy alignment.To set the "base" numbering for a chapter, set the number a *one* place in each chapter, namely in the actual chapter number ("3.") with the style of "Heading 1". Go to Format->Bullets and Numbering->Customize->Start at.

Heading 3

1.4.4 Notes to BallotersPreparing a document for balloting often requires some additional information which should be taken care of when reading the document. This initial section appears directly below the list of co-chairs and editors, but before the table of contents. This ensures that everybody is aware of this additional information.

Notes to Balloters

This is the Member Ballot for V2.x. Please ballot on chapter content only. The formatting of the chapters is mainly driven by the requirement to

automatically extract data for automatic consistency checking and to build the HL7 V2.4 Database. The format has been reviewed by the HL7 Architectural Review Board. As HL7 also intends to publish the Standard in PDF and HTML/XML format, variations in presentation may not be avoidable. For this reason, not all style enhancements have change marks.

HL7 HQ, the TC Chairs and the International Affiliates thank you for your consideration!

This section is makes use of the available styles.

Afterwards the whole section (without a section heading) is shaded in grey 15% and border lines are 1½ points.



1.4.5 Preparing documents for publishinga) Run Macros

b) Clear number gallery (seep rocedure in section 1.7.1)

c) Correct typos

d) Make technical corrections approved by ARB that do not need to be balloted

e) Make any sections moves that do not involve content change

f) Make any other styleguide changes that do not involve content change

g) Set place holders for new sections

h) Check and correct bookmarks

i) Check that Header is correct

j) Check that the Footer indicates the proper ballot name or final name and the date

k) Turn Tracking (Checkmarking) on

l) Make content changes as needed

1.4.6 Event/Message and Segment DefinitionThe structure of the HL7 chapters consists of two parts. The first lists events, triggers and messages with the relevant message structures; the second part defines the segments, elements, components and subcomponents in detail.

1.4.7 Field DefinitionsThe field definitions for a segment have to be appended to the segment definition. It starts with the level 4 heading naming the segment after which the fields/elements are defined. No text is necessary.

Heading 4

1.4.7.0 PID-1 Set ID - PID (SI) 00104 All field definitions start with a level 4 heading consisting of four parts:

1) The data element identifier

2) the name of the data element

3) the type of the data element (in brackets)

4) the data element ID number

The four heading parts are separated by three spaces each.

The field definition header also contains an invisible entry for index generation. Look at the “Set ID – PID” heading above with Tools -> Options -> View -> All checked on.

1.5 DOCUMENT PROPERTIESTitle: The contents of this document, i.e. the name of the chapterTopic: “HL7” and the corresponding version numberAuthor: The name of the editors.

1.6 FORMATTING

1.6.1 Text IndentationText following headings level 1 and 2 are flush left with no indentation; the MS Word style is “Normal”.

Text following level 3 headings and lower is formatted using "Normal Indented", indented 1/4" (0.63cm).



1.6.2 Message DefinitionsMessage definitions are in form of a table to simplify the document data extraction This table consists of three columns and as many rows as necessary.

The first row (“Msg Table Header”) describes:

in the first column the message type, the event/trigger code and the message structure ID separated by "^",

in the second column a short description

in the third column the group name to identify logical groups of segments

in the fourth column a status concerning backward compatibility

in the fifth column the corresponding HL7 chapter.

All subsequent rows are used for the message description (“Msg Table Body”). The segments used and structure symbols are listed in the left column. The middle column holds the segment name.

If this message applies to more than one event, all event codes are listed within the second field of the first column in the first row. Ranges are separated by dashes (“-“) and single values by commas.

The message definition tables are indented by 1/4" (0.63cm).

Msg Table Header Hyperlink to “EVN” Msg Table Body

ADT^A01^ADT_A01 ADT Message Group Name Status Chapter

MSH Message Header 2EVN Event Type 3PID Patient Identification 3[PD1] Additional Demographics 3[ { NK1 } ] Next of Kin /Associated Parties 3PV1 Patient Visit 3[ PV2 ] Patient Visit - Additional Info. 3[ { DB1 } ] Disability Information 3[ { OBX } ] Observation/Result 7[ { AL1 } ] Allergy Information 3[ { DG1 } ] Diagnosis Information 6[ DRG ] Diagnosis Related Group 6[ PROCEDURE { PR1 Procedures 6 [{ROL}] Role 12 }][ { GT1 } ] Guarantor 6[ INSURANCE { IN1 Insurance 6 [ IN2 ] Insurance Additional Info. 6 [ {IN3} ] Insurance Additional Info. - Cert. 6 } ]

Columns 1 and 2 are left justified – and columns 3 to 5 are centered.

It is required that all segments in the message structure that are defined in the same chapter have a hyperlink to the segment attribute table.

Whenever brackets are used for one segment only they should appear within the same cell. Otherwise separate rows should be used.

Indentation can use tabs or spaces. The latter are preferred. If possible the closing brackets should appear below the corresponding opening bracket.

1.6.3 Segment DefinitionsAttribute headers start on a new page. The attribute tables, i.e. the list of data elements used, are indented 1/4" (0.63cm) and should be formatted as follows:



Attribute Table CaptionAttribute Table HeaderAttribute Table Body Bookmark (“EVN”) Index informationHyperlink to “ID”

HL7 Attribute Table – EVN – Events {XE “HL7 Attribute Table: EVN” }{XE “EVN attributes”}

SEQ LEN DT OPT RP/# TBL# ITEM# ELEMENT NAME1 3 ID B 0003 00099 Event Type Code2 26 TS R 00100 Recorded Date/Time 3 26 TS O 00101 Date/Time Planned Event4 3 IS O 0062 00102 Event Reason Code5 60 XCN O Y 0188 00103 Operator ID6 26 TS O 01278 Event Occurred

The attribute table caption line information is used to generate the index of HL7 attribute tables. Therefore the complete caption is repeated in the index field. To facilitate the generation of the database the index field must be positioned at the end of the line!

The attribute table caption line must be bookmarked with the 3-letter segment ID (i.e. "EVN") for referencing by the message structure tables.

The header is shaded 10%.

The attribute table grid lines are ¾ points, and the border is a dual ¾ point line.

Additional index information is added at the end of the paragraph. This kind of information is hidden and therefore only visible when switching on “all” in Extras->Options->non-printable characters. (The information above is formatted as normal text so it appears in the printed version of this document.)

1.6.4 Field DefinitionsStyle “Heading 4” 1.5.10.0 starts with zero to ensure that “field definitions” after a HL7 Attribute Table are automatically renumbered. Where a zero-numbered heading is not desired, hide it with Format -> Font -> Hidden.

The Field Definition heading now consists of 5 components:

Section heading number: 3.3.2.3 (automatically generated by Word)

Element name: PID-3 Element description: Patient Identifier List (Use Title Case)

Element data type: (CX) Unique data element identifier: 00106

The 5 heading components are separated by 3 spaces each. The complete heading looks as follows:

3.3.2.3 PID-3 Patient Identifier List (CX) 00106

1.6.5 ComponentsWhenever a data element consists of components, they are defined first within the description. This definition is done in a paragraph like form. This definition also applies for subcomponents.Components: <identifier (ST)> ^ <text (ST)> ^ <name of coding system (ST)> ^ <alternate identifier (ST)> ^

<alternate text (ST)> ^ <name of alternate coding system (ST)>

Components

The component definition, i.e. the list of components, is not repeated within each field definition since this functionality can be reached by hyperlinking! This change reduces drastically the amount of pages necessary for printing.

1.6.6 Components (Data type)The components which make up a data type are specified in form of a table like segments or real tables.



Component Table CaptionComponent Table HeaderComponent Table Body Bookmark (“CE”) Index information

Hyperlink to “ST”

HL7 Component Table - CE – coded element{XE “HL7 Component Table - CE ” }

SEQ LEN DT OPT TBL# COMPONENT NAME COMMENTS SEC.REF.

1 ST R Identifier2 ST O Text3 IS R 0396 Name Of Coding System4 ST O Alternate Identifier5 ST O Alternate Text6 IS O 0396 Name Of Alternate Coding System

Length: 250

Example:|F-11380^CREATININE^I9^2148-5^CREATININE^LN|


Columns 6 and 7 are left justified.

The attribute table grid lines are ¾ points, and the border is a dual ¾ point line.

Within the comments column there is no hint whether this component is itself a complex data type. The user can find out by checking the underlying data type. Within the narrative a hint (note) can be found to give an indication the data type which embeds the current one. But this should only apply to sparsely use data types.

See Bookmark procedure for setting a Bookmark in the caption.

1.6.7 Component DefinitionsStyle “Heading 4” 1.5.10.0 starts with zero to ensure that “component definitions” after a HL7 Component Table are automatically renumbered. Where a zero-numbered heading is not desired, hide it with Format -> Font -> Hidden.

The Component Definition heading now consists of 4 components:

Section heading number: 3.3.2.3 (automatically generated by Word)

Component name: CE.1 Component description: Identifier (Use Title Case)

Component data type: (ST)The 4 heading components are separated by 3 spaces each. The complete heading looks as follows:

3.3.2.3 CE.1 Identifier (ST)

1.6.8 Table DefinitionsWhenever a table is referenced within a field description the first time (according to the sequence of chapters) the corresponding values have to be defined in form of a table. If no values can be identified this table should contain one entry saying “no suggested values”.

1.6.8.1 General rules Tables with double borders are normative, tables with single borders are user-defined.

Each table consists of a caption, a header and a body.

The header part is shaded.



Table structures are to be inserted in the standard, even if values have not been determined.

1.6.8.2 HL7 TablesHL7 Table Caption

HL7 Table HeaderHL7 Table Body Bookmark (“HL70103”) Index information

HL7 Table 0103 – Processing ID{XE “HL7 Table: 0103 - Processing ID ” }Value Description

01 Patient request02 Physician order03 Census management

Note the index field in the HL7 table caption above.

The HL7 table caption line must be bookmarked with the 7-character table ID (ie. "HL70103", see 2.8.3.3) for referencing by all references (ie. HL7 Table 0103 – Processing ID) to that table within the same chapter.


HL7 table grid lines are ¾ points, and the border is a dual ¾ point line.

As the width of HL7 tables changes, they are centered.

Note: HL7 Table 0136 - Yes/no Indicator should not be repeated with different values, rather the interpretations should be given in a “normal list” style. (This avoids the duplication of HL7 table 0136 with differing values.) Example:

Definition: This field indicates whether or not the patient’s identity is known. Refer to HL7 Table 0136 - Yes/no indicator for suggested values.

Y the patient’s identity is unknown

N the patient’s identity is known

1.6.8.3 User-defined TablesUser Table Caption

User Table Header

User Table Body Bookmark (“HL70062”) Index information

User-defined Table 0062 - Event reason{XE “ User-defined Table: 0062-Event reason ” }

Value Description01 Patient request02 Physician order03 Census management

Note the index field in the User Table caption above.

The user-defined table caption line must be bookmarked with the 7-character table ID (ie. "HL70062", see 2.8.3.3) for referencing by all references (ie. User-defined Table 0062 – Event Reason) to that table within the same chapter.


User Table grid lines are ¾ points, and the border is a 1½ point line.

As the width of User-defined tables changes, they are centered.

It is a requirement that all user-defined tables are included in a chapter, even if values have not been determined. The tables should be formatted the same as any other user-defined table, but there should be only one "User Table Body" row, which should read: "No suggested values defined."



1.6.8.4 Other TablesAll other tables use the styles

Other Table Caption

Other Table Header

Other Table Body

1.6.9 Table Value DefinitionsWe propose the following notation:

The basic structure of a table is value in the left-most column and the description in the 2nd-leftmost column. Only one value pair per row is allowed. If comments, etc. are required, these can be entered in additional columns on the right.

A range of values is indicated by three dots separated by spaces from the first and last value: <first value> … <last value>A dash ("-") seems to be a bad solution because it may indicate a negative value.

Different values with the same description can be separated by commas, eg. NO, NIL, NONE.

1.6.10 References to Data ElementsReferences to data elements are used within standard text shall be formatted like in PV1-6 - Prior Patient Location.

Reference Attribute

Here the character style “Reference Attribute” is used. This assignment of styles will be used later to identify incorrect references of data elements in accordance with the definition.

1.6.11 References to HL7 TablesReferences to HL7 Tables should be done by hyperlinking. If this cannot be achieved the references within text like HL7 Table 0103 - Processing ID shall be formatted using the MS Word Style “Reference HL7 Table”.

1.6.12 References to User TablesThe same applies to the references to User Tables. If no hyperlinking is applied the text like User-defined Table 0062 – Event Reason shall be formatted using the MS Word Style “Reference User Table”.

1.6.13 NotesNote

Note: The official title of UB is “National Uniform Billing Data Element Specifications.” Most of the codes added came from the UB-92 specification, but some came from the UB-82.

The “note” box is aligned with the text indentation. The bolded initial text "Note:" is followed by two spaces after the colon.

The “Note” style has 4 points before and 3 after each paragraph.

1.6.14 ExamplesIf an example is necessary to illustrate the meaning of a message the style “Example” should be used.

Example

MSH|.|..|...EVN|..|..|...PID|||..........Examples and use cases should be placed as close to the relevant chapter section as possible.



1.6.15 Page HeadersThe header line consists of a ¾ point border line below. It merely names the document.

1.6.15.1 First Page HeadersThe first page does not have a header.

1.6.15.2 Odd Page HeadersChapter 3: Patient Administration

The number and name of the chapter is shown in the page header, right justified

1.6.15.3 Even Page HeadersChapter 3: Patient Administration

The number and name of the chapter is shown in the page header, left justified.

1.6.16 Page FootersFooter lines consist of two lines. The first lists a copyright statement and the page number with total number separated by a dash. The second line contains the status of this document as well as the issue date.

1.6.16.1 Odd pages and first pageThe footer consists of different parts:

1) the copyright notice including the year and "All rights reserved."

2) a reference to Health Level Seven, Inc.

3) the version number

Health Level Seven, Version 2.5 © 2001. All rights reserved Page 3-5Ballot May 2001

4) the release status (i.e. one of: “Draft”, “Ballot”, “Final Standard”)

5) the chapter and page number formatted as “<chapter>-<page>”.

6) the month and year of release, Yk2 compliant and internationally readable.

1.6.16.2 Even pagesPage 3-6 Health Level Seven, Version 2.5 © 2001. All rights reservedMay 2001 Ballot

1.6.17 Setting BookmarksWord gives only limited help on how to set bookmarks. The following list might assist you:

1) Highlight the text that you want to bookmark

2) Go to the Insert->Bookmark

3) Enter the name of your bookmark

4) Select ADD



5) The text will appear in brackets [ ] when you have the “bookmark view” or “all hidden characters” turned on

1.7 LISTSFor listing items we provide four different styles:

“Normal List”

a) “Normal List Alpha”

1) “Normal List Numbered”

I) “Normal List Roman”

“Normal List Bullets”

Here is some technical information on lists:

List Gallery

Normal -

Alpha Number 5

Numbered Number 2

Roman Number 7

Bullet Bullet 7

Lists should be standardized in its usage. Alpha, numbered and roman lists represents a hierarchy, also in their indentation. Therefore, whenever possible try to use alpha lists first.

Use Normal List Alpha under the following circumstances:

The items occur in a definite sequential order

A large number of items are being enumerated.

Use Normal List Numbered under the following circumstances:

Steps in a procedure or process are being enumerated

Lists embedded within alpha lists

Use Normal List Bullets under the following circumstances:

Fewer than 6 (or perhaps 7 or fewer) items are listed and they do not meet above criteria

Avoid using the Normal List. Consider using a table instead.Avoid deeply indented lists.

Please the procedures section for trouble shooting.

1.8 INDEXINGAnother important point for documentation is the generation of an index. For this a lot of additional information is necessary. To get a consistent result some rules have to be established how to formulate such entries.In order not to interrupt the parsing process this information must be placed at specific points within the text.The use of a colon (“:”) build up groups like a list of all tables.

1.8.1 Data Types1) „Data Types:“ + <Data Type> + “ - “ + <Data Type Description>



2) <Data Type> + “ - “ + <Data Type Description>

3) <Data Type Description>

1.8.2 Data ElementsThe name of the data element is repeated within the title.

1.8.3 SegmentsWithin the title three different entries are necessary:

1) <Segment Identifier>

2) “Segments:” + <Segment Identifier>

3) <Name of the segment> + “ (“ + <Segment Identifier> +”)”

1.8.4 Attribute TablesThe index information must be added at the end of the paragraph (i.e. line).

1) <Segment Identifier>

2) “HL7 Attribute Table:“ + <Segment Identifier>

1.8.5 Events1) <Event description>

2) “Events:” + <Event Code>

1.8.6 Tables1) “Tables: User or HL7 defined:” + <Table No.> + “ - “ + <Table description>

2) <Table description>” + “ (“ + <Table No.> +”)”

1.8.7 Message Types1) <Message Type>

2) “Message Types:” + <Message Type>

1.9 CONFORMANCE STATEMENTSConformance Statements are a new construct in version 2.4.Three different conformance statements do exist:

Query with tabular response

Query with segment pattern response

Query with display response

Every conformance statement consists of several distinct parts identified within the next section.

1.9.1 Distinct Parts of a Conformance StatementThe numbers within the right three columns specify the sequence order of the part within the conformance statement.



No. Part Tabular response Segment pattern response

Display response

1 introduction (= main table conformance statement) 1 1 12 query grammar 2 2 23 response grammar 3 3 34 QPD input parameter specification 4 4 45 QPD input parameter field description and

commentary5 5 5

6 output specification and commentary 6 67 virtual table 78 RCP Response Control Parameter Field Description

and Commentary8

1.9.2 Formatting the different parts of a conformance statement with styles Some fields are divided into two parts, i.e. the row now contains more cells

A style is assigned to each field

Some rows are inserted due to layout

Some fields are spread over separate rows due to storage reasons for the database

The applied styles are inserted into the text and marked in red.

Some rows can be repeated as often as necessary. These rows are marked by a red arrow on the right side.

The table border is a dual ¾ point line. The grid lines are ¾ points single line.

1.9.2.1 Introduction

Conformance Statement (Qry Table Caption)Query Statement ID: Q31 (Qry Table ID)

Type: Query (or Publish) (Qry Table Type)

Query Name: Dispense History (Qry Table Name)

Query Trigger (= MSH-9): QBP^Q11^QBP_Q31 (Qry Table Trigger Query)

Query Mode: Both (Qry Table Mode)

Response Trigger (= MSH-9): RSP^K31^RSP_K31 (Qry Table Response Trigger)

Query Characteristics: Returns response sorted by Medication Dispensed unless otherwise specified. (Qry Table Characteristics Query)

Purpose: Find medications dispensed between specified date range for specified medical record numbers (Qry Table Purpose)

Response Characteristics: Returns response sorted by Medication Dispensed unless otherwise specified. (Qry Table Characteristics Response)

Based on Segment Pattern: RDS_O01 (Qry Table Segment Pattern)

Response Control Characteristics: [RCP segment options go here] (Qry Table Response Control Characteristics)

RCP Constraints: (Qry Table RP Constraints)

Modify Indicator: (Qry Table Modify Indicator)



1.9.2.2 Query GrammarThe query grammar is exactly the same as any normal message definition. This is especially true for the used styles. If a message should be used, which is defined somewhere else no additional definition is required because the definition in the main table refers to it.

Please see section 1.5.2.

1.9.2.3 QPD Input Parameter Specification

Field Seq

Field Name (Qry Table Input Header)

Key/

Search

Sort

LEN TYPE

Opt

Rep

Match Op

TBL Segment Field Name

LOINC or HL7 Code

Element Name

1 PatientList (Qry Table Input)

S Y 20 CX O PID-3 Patient Identifier List

2 MedicationDispensed

S Y 100 CE O = RXD-2 Dispense/Give Code

3 DispenseDate.LL

S Y 26 TS O >=

RXD-3 Date/Time Dispensed

4 DispenseDate.UL

S Y 26 TS O <=


5 SortControl SRT O NNNN

1.9.2.4 QPD Input Parameter Field Description and Commentary

Input Parameter (Qry Table Input Param Header)

Comp. Name

DT Description

PatientList (Qry Table Input Param)

CX

Components: <ID (ST)> ^ <check digit (ST)> ^ <code identifying the check digit scheme employed (ID)> ^ < assigning authority (HD)> ^ <identifier type code (IS)> ^ < assigning facility (HD)>

The combination of values for PatientID, and PatientIDAssigningAuthority, are intended to identify a unique entry on the PATIENT_MASTER table. The PatientIDTypeCode is useful for further filtering or to supply uniqueness in the event that the assigning authority may have more than one coding system. (The PATIENT_MASTER table contains a constraint that prevents multiple patients from being identified by the same combination of field values.) This PATIENT_MASTER entry will be searched against on the PHARMACY_DISPENSE_TRANSACTION table to retrieve the rows fulfilling the query conditions.

If this field is not valued, all values for this field are considered to be a match.

ID ST If this field, PID.3.1, is not valued, all values for this field are considered to be a match.

Assigning Authority

HD If this field, PID.3.4, is not valued, all values for this field are considered to be a match.

1.9.2.5 Response GrammarThe response grammar is much like any normal message definition, except the three additional columns. Please see section 1.5.2.

If a conformance statements can make use of response message definition which is defined somewhere else, no additional specification is necessary.



1.9.2.6 Output specification and commentaryIf the message contains a DSP segment for displaying data it looks like the next table. Please consider that each line is represented by one row.

The data will display as follows: (Q13) (Qry Table DisplayLine Header)

DSP|| GENERAL HOSPITAL – PHARMACY DEPARTMENT DATE:mm-dd-yy (Qry Table DisplayLine)

DSP|| DISPENSE HISTORY REPORT PAGE n

DSP||MRN Patient Name MEDICATION DISPENSED DISP-DATE

DSP||XXXXX XXXXXx, XXXXX XXXXXXXXXXXXXXXX mm/dd/ccyy

…

DSP|| << END OF REPORT >>

1.9.2.7 RCP Response Control Parameter Field Description and Commentary

Field Seq

Name Component Name

LEN DT Description

1 Query Priority 1 ID D(eferred) or I(mmediate). Default is I

2 Quantity Limited Request

10 CQ

Quantity NM Number of units

Units CE CH, LI, PG, RD. Default is LI.

3 Response Modality 60 CE

1.9.2.8 Virtual TableA virtual is identical to the input parameter specification. In order to distinguish both, please use different styles:

Column Name (Qry Table Virtual Header)

Key/

Search

Sort

LEN TYPE

Opt Rep

Match Op

TBL Segment Field Name

LOINC or HL7 Code

Element Name

PatientList (Qry Table Virtual)

S Y 20 CX O PID-3 Patient Identifier List

MedicationDispensed

S Y 100 CE O = RXD-2 Dispense/Give Code

DispenseDate.LL

S Y 26 TS O >=


DispenseDate.UL

S Y 26 TS O <=


SortControl SRT O NNNN

1.10 OTHER EDITING TASKS AND ISSUES Ensure any new or changed datatypes are communicated to the C/Q TC for inclusion in Chapter 2. Check if any changes to the datatypes are required to any other chapters. Check example messages for compliance with any changes made to the chapter content.



Any new triggers must be included in Table 0354 (Message Structure, the 3rd component of MSH-9) in Chapter 2.

Any new style elements introduced into the standard must be checked with the Publishing Committee to ensure a uniform layout and future integration into the database.



2.HL7 STYLE SHEET2.1 AUTHORIZED PARAGRAPH STYLES FOR THE HL7-2 TEMPLATE

Style Name Attributes(Where none listed, follows base style)Font Kern Line

SpacingSpace Before

Space After

Justifi-cation

Other Indent Tabs Base Style Style for following Paragraph

Attribute Table Body Arial 8 pt 8 pt 9 pt 2 pt 1.5 pt Centered NormalAttribute Table Caption Times New Roman 10 pt 9 pt 3 pt Centered Keep with next Attribute Table

BodyAttribute Table Header Arial 8 pt bold 2 pt 1.5 pt Centered Keep with next Attribute Table

CaptionComponents Courier New 8 pt 7 pt 8 pt 6 pt 6 pt Keep lines

togetherLeft 0.75”Hanging 0.75”

Normal

Component Table Body

Arial 8 pt 8 pt 9 pt 3 pt 0 pt Centered Normal

Component Table Caption

Arial 10 pt 9 pt 3 pt Centered Keep with next Component Table Body

Component Table Header

Arial 8 pt bold 2 pt Centered Keep with next Component Table Caption

Example LinePrinter 8 pt (no proofing) 8.5 pt 0 pt 0 pt Keep lines together

Left 1.3”Hanging 0.25”

Normal

Footer Arial 8 pt 0 pt 0 pt 6.5” right flush

Normal

Footnote text Arial 8 pt 10 pt Hanging 0.25”

0.25 Normal

Header Arial Bold 10 pt 0 pt 18 pt Border: bottom (single solid line); Border spacing: 1 pt

6.35” right flush

Normal

Heading 1 Right Times New Roman 36 pt bold 36 pt 12 pt Flush right None Heading 1HL7 Table Body Arial 8 pt 1 pt 0.5 pt NormalHL7 Table Caption Times New Roman 10 pt 9 pt 3 pt Centered Keep with next HL7 Table

BodyHL7 Table Header Arial 8 pt bold 2 pt 1 pt Centered Keep with next HL7 Table

CaptionMsg Table Body Courier New 8 pt single 0 pt 0 pt NormalMsg Table Caption Times New Roman 10 pt 9 pt 0 pt 3 pt Keep with next Msg Table

Health Level Seven, Version 2.5 © 2001. All rights reserved Draft 22 October 2001



SpacingSpace Before

Space After

Justifi-cation


BodyMsg Table Header Courier New 8 pt bold underline 6 pt 2 pt Keep with next Msg Table

CaptionNormal Times New Roman 10 pt 10 pt single 0 pt 6 pt Flush left Widow

/orphan controlOutline level body text

Normal Indented “ “ “ 0 pt 6 pt “ “ Left 0.5” NormalNormal List “ “ “ 0 pt 6 pt “ “ Left 0.5” NormalNormal List Alpha “ “ “ 6 pt 6 pt “ Numbered

(alpha):a), b), c)


.95” left Normal Normal List Alpha

Normal List Numbered “ “ “ 6 pt 6 pt “ Numbered (arabian numerals)1), 2), 3)


Normal Normal List Numbered

Normal List Roman “ “ “ 6 pt 6 pt “ Numbered (roman numerals)i), ii), iii)


Normal Normal List Roman

Normal List Bullets “ “ “ 6 pt 6 pt “ Bulleted Left 0.7”Hanging 0.25”

Normal Normal List Bullets

Note Arial 9 pt 8 pt 4 pt 3 pt Border single solid line ¾ pt line width

Left 0.6”hanging 0.5”

0.5” left1” left

Normal

Note Indented Arial 9 pt 4 pt 3 pt Border single solid line ¾ pt line width

Left 0.7”hanging 0.5”

Note Normal Indented

Other Table Body 9 pt 3 pt 3 pt NormalOther Table Caption 9 pt 3 pt Centered Keep with next NormalOther Table Header 9 pt bold 1 pt Centered Keep with next NormalTOC1 Arial 12 pt bold all caps 18 pt 0 pt 0.5” left

6.5” right flush

Normal

TOC2 Arial Bold 10 pt bold all caps 6 pt 6 pt Left 0.14” 6.5” right flush

TOC1

TOC3 Arial Bold 10 pt bold small caps 0 pt 0 pt Left 0.28” 6.5” right flush

TOC2

TOC4 Arial 9 pt 0 pt 0 pt Left 0.42” 6.5” right flush

TOC3

TOC5 0 pt 0 pt Left 0.56” 6.5” right flush

TOC4

Health Level Seven, Version 2.5 © 2001. All rights reservedOctober 2001 Draft 22



SpacingSpace Before

Space After

Justifi-cation



TOC5


TOC6


TOC7


TOC8

User Table Body Arial 8 pt 1 pt 0.5 pt NormalUser Table Caption Times New Roman 10 pt 9 pt 3 pt Keep with next 0.63” NormalUser Table Header Arial 8 pt bold 2 pt 1 pt Centered Keep with next NormalHeading 1 Times New Roman 36 pt bold 14 pt 18 pt 6 pt Flush right Keep with next

Level 1 outline numbered.Follow with nothing.

None None Normal Normal

Heading 2 Arial 14 pt bold all caps Single 18 pt 3 pt Keep with nextLevel 2 outline numbered.Follow with tab.

Hanging 0.7”

0.7” left Heading 1 Normal

Heading 3 Arial 12 pt bold 12 pt 3 pt Keep with nextLevel 3 outline numbered.Follow with tab.

Hanging 0.7”

0.7” left Heading 2 Normal Indented

Heading 4 * Arial 10 point 6 pt 3 pt No widow /orphanKeep with nextLevel 4 outline numbered.Follow with tab.

Hanging 0.7”


Heading 5 Arial 10 point italic 6 pt 3 pt Keep with nextLevel 5 outline numbered.Follow with tab.

Hanging 0.7”


Heading 6 Arial 10 point italic Hanging 0.7”

Heading 5

Heading 7 Arial 10 point italic Hanging 0.7”

Heading 6

Health Level Seven, Version 2.5 © 2001. All rights reserved Draft 22 October 2001


Style “Heading 4” N.N.N.0 starts with zero to ensure that “field definitions” after a HL7 Attribute Table are automatically renumbered. Where a zero-numbered heading is not desired, hide it with Format -> Font -> Hidden.

Style Name Attributes(Where none listed, follows base style)Font Size Attribute Base Style Style for

following Paragraph

Hyperlink Times New Roman 10 ptReference Attribute Times New Roman HyperlinkReference HL7 Table Times New Roman Italics HyperlinkReference User Table Times New Roman italics Hyperlink

Health Level Seven, Version 2.5 © 2001. All rights reservedOctober 2001 Draft 22


2.1.1 Style Name Notes Style “Heading 4” N.N.N.0 starts with zero to ensure that “field definitions” after a HL7 Attribute Table are

automatically renumbered. Where a zero-numbered heading is not desired, hide it with Format -> Font -> Hidden.

2.1.2 FontWhere set: Format/Style/Modify/Font

2.1.3 KernWhere set: Format/Style/Modify/Font/Character Spacing

2.1.4 Line SpacingWhere set: Format/Style/Modify/Paragraph/Indents and Spacing/Spacing:Line Spacing box

2.1.5 Space BeforeWhere set: Format/Style/Modify/ Paragraph/Indents and Spacing/Spacing:Before box

2.1.6 Space AfterWhere set: Format/Style/Modify/ Paragraph/Indents and Spacing/Spacing:After box

2.1.7 JustificationWhere set: Format/Style/Modify/ Paragraph/Indents and Spacing/Alignment

2.1.8 OtherThis includes notes for text control, borders and shading

Text control Where set: Format/Style/Modify/paragraphs/Line and Page Breaks

Border control Where set: Format/Style/Modify/Border

2.1.9 IndentWhere set: Format/Style/Modify/ Paragraph/Indents and Spacing/Indentation: Left

Where set: Format/Style/Modify/ Paragraph/Indents and Spacing/Indentation: Special and By

2.1.10 TabsWhere set: Format/Style/Modify/Tabs

2.1.11 Base StyleWhere set: Format/Style/Modify/Based On

2.1.12 Style for Following ParagraphWhere set: Format/Style/Modify/Style for Following Paragraph

2.2 AUTHORIZED CHARACTER STYLES FOR THE HL7-2 TEMPLATEStyle Name Attributes (Where none listed, follows Normal)

Font Other Base StyleDefault Paragraph Font Times New Roman 10 ptReference Data Element Times New Roman 10 pt Italics Default Paragraph FontReference HL7 Table Times New Roman 10 pt Italics Default Paragraph FontReference User Table Times New Roman 10 pt italics Default Paragraph Font



2.3 WITHDRAWN STYLES FOR THE HL7-2 TEMPLATE Indent Normal Normal Indented MsgHeader Msg Table Header MsgStructure Msg Table Body Attribute Table Heading Attribute Table Header Msg Table Heading Msg Table Header

2.4 LIST OF NEW STYLES FOR THE CONFORMANCE STATEMENTIndent: 0”No tabs used.Other: nothing special

Style Name Font Line Spacing

Space Before

Space After

Justification Base Style

Qry Table Caption Times New Roman 12pt bold

6 6 Centered Qry Table Header

Qry Table Characteristics Query

Arial 8pt 1 6 Qry Table Name

Qry Table Characteristics Response


Qry Table DisplayLine Courier New 8pt 1 6 Qry Table NameQry Table DisplayLine Header

Courier New 8pt 1 6 Qry Table Header

Qry Table Header Arial 8pt bold 1 6 StandardQry Table ID Arial 8pt 1 6 Qry Table NameQry Table Input Arial 8pt 1 6 Qry Table NameQry Table Input Header Arial 8pt bold 1 6 Qry Table

HeaderQry Table Input Param Arial 8pt 1 6 Qry Table NameQry Table Input Param Header

Arial 8pt bold 1 6 Qry Table Header

Qry Table Mode Arial 8pt 1 6 Qry Table NameQry Table Modify Indicator


Qry Table Name Arial 8pt 1 6 StandardQry Table Purpose Arial 8pt 1 6 Qry Table NameQry Table RCP Arial 8pt 1 6 Qry Table NameQry Table RCP Header Arial 8pt bold 1 6 Qry Table

HeaderQry Table RCP Constraints


Qry Table Response Trigger


Qry Table Response Control Characteristics


Qry Table Segment Pattern


Qry Table Trigger Query Arial 8pt 1 6 Qry Table NameQry Table Type Arial 8pt 1 6 Qry Table NameQry Table Virtual Arial 8pt 1 6 Qry Table NameQry Table Virtual Header

Arial 8pt bold 1 6 Qry Table Header



2.5 LIST OF COLUMN WIDTHS FOR ALL TABLESThis table reflects the widths (in inches) of the different tables.

ColumnTable

1 2 3 4 5 6 7 8 9 10 11 12 13

Attribute Table 0.45 0.45 0.45 0.45 0.45 0.6 0.5 3 - - - - -Component Table 0.45 0.4 0.5 0.4 0.5 2 1 0.7 - - - - -HL7 Table ? ? ? - - - - - - - - - -Msg Table 1.5 2 1 0.55 0.75 - - - - - - - -Qry Table 2 3.2 - - - - - - - - - - -Qry Table Input 0.45 0.9 0.55 0.2 0.4 0.5 0.2 0.2 0.5 0.5 0.6 0.5 0.7Qry Table Input Param 1.1 0.7 0.4 4 - - - - - - - - -Qry Table DisplayLine 6 - - - - - - - - - - - -Qry Table Virtual 1 0.6 0.2 0.4 0.5 0.2 0.4 0.5 0.5 0.65 0.7 0.55 -Qry Table RCP 0.5 1.5 0.6 0.3 0.3 2 - - - - - - -User-defined Table ? ? ? - - - - - - - - - -

2.6 REMARKS

2.7 A NOTE ON HTML STYLE SHEETSLarry devised a style sheet that uses SOME of the above styles, with suitable modifications, for applying to HTML documents. Copies of this style sheet can be found in the HTML subdirectories where the HTML copies of the Standards Guide and Implementation Guide are saved.

To imbed the style sheet into an HTML document, make sure it is copied into the same directory as that document. Then, just above the </head> tag, type the following sequence:

<link rel=“stylesheet” href=“style.css” type=“text/css”>

Styles for Heading 1-Heading 5 are in this sheet as modified -- since HTML does not support outline numbering, numbers must be manually added.

The HL7 style “Components” is incorporated into the HTML stylesheet as “definition.”

The HL7 style “Example” is incorporated into the HTML stylesheet as “defined term.” This has been modified to be in System font rather than LinePrinter, because the font the viewer sees it in depend on the fonts available on his machine; therefore Larry thinks it advisable to only use the most common fonts.



2.8 FORMATTING MACROS (STYLE FIXER)This part of this document contains the macros which help formatting the HL7 standard documents. These pages provide an easy access to the macros.In order to make use of the macros you have to enable them during loading this file.The macros operate on open files. Therefor the document(s) onto which these macros should be applied should be opened first.

Macro OverviewSequence Macro Name Comment1 Adjust All Formats2 Adjust Chapter Number3 Adjust Number Gallery I found this needs to be done manually. See section 2.84 Delete Unused Styles5 Convert Message Tables into New Format6 Add 3rd Column to Tables7 Format All Tables You will get an error if you do this one before Convert

Message Tables into New FormatFormat Reference Entries Use hyperlinking instead.Get All Formats It is not necessary to execute this macro

2.8.1 Enabling MacrosIf you are not prompted to enable macros when opening this document, select Tools, Macro, Security and verify that your security level is not set to High (which automatically disables all macros).

2.8.2 General RemarksIt is not such easy to do some auto-format an already formatted documents. We can try to format tables if an indication is available. We also can try to adjust the properties of styles according to the rules established by the publishing committee. But I can not guarantee that this will work in any case since Word has a built-in automatism which tries to correct the actions we execute.Additionally some documents make intensive use of direct formatting, especially when creating numeric, alpha-numeric or bulleted lists without using the style “Normal List xxxx”.Another fact to mention is that these macros apply a huge amount of corrections. As a result an error may occur saying that Word is not able to keep track of all changes. A possible solution is to save the file to disc.Formatting tables assumes that the tables are “real” tables with the same number of columns each row (except conformance statements). Furthermore all cells within the same column should have the same width. If this requirement is NOT acceptable please let me know. I can change that but it would increase computation time!So, PLEASE execute these macros on safe copy of the document!

2.8.3 Adjust the properties of the stylesThis macro was generated by the help of “Get All Formats”. In contrast to it this one adjusts the properties according to the style guide.

Adjust

Double click here. Whenever such a button-like frame appears, it hides the macros which can be activated by double-clicking onto the text inside!Currently the styles for lists do not adjust the numbering or bulleting due to problems with the rest of the styles! A lot of paragraphs are formatted directly so that such an approach surprisingly displays funny results.

2.8.4 Format all Tables within the documentThis macro formats all relevant tables. First of all the user is asked for the document to which the formatting should be applied. For this purpose a combo box will be displayed. After selecting the file out of the list a new dialog box will appear asking the user for the range of tables. Per default all tables are formatted, but the user can also reduce the set of tables. On ok the formatting rules will be applied to all the requested tables within this document.



Up to now I haven’t found a method to align the whole cell like it can be done by “Table->Mark whole table” and “center”, so this is left for manual correction. The correct rules are determined out of the formatting of the upper left cell of each table:

Format

This task will take up to 5 to 10 minutes to apply the rules to all tables!

2.8.5 ReferencesThe next macro provides a dialog which allows for modifying the reference entries. It starts with a combo box for selecting the document. Next a dialog will be shown which guides through the formatting process:

Format

This Macro applies the styles! We have decided to use hyperlinking for references. Therefore this macro will NOT work.

If the necessary character styles are not available they will be created automatically.The button “next” searches for the next text which corresponds to the format specified in the top frame (italics or bolded) and is not formatted as a reference (at least the left part of it). According to the text found the action to be performed will be selected automatically. The user has the opportunity to modify this selection by hand. On the one hand he can modify the action to be performed. On the other hand he can expand or shrink the selected text be the help of the four buttons at the top right corner of this dialog.The button “apply” performs the specified modification of the styles on the selected text.At this place it is important to mention that the styles are assigned to the exact selected text. Otherwise the usage of styles becomes worthless.

2.8.6 Adjust the numbering of the headingsThe numbering of the different chapters requires a manual adaptation of the corresponding properties. This macro asks for the chapter number.

Adjust

This macro currently does not adjust the tab stops. Therefor this macro should be applied before the following one.

2.8.7 Adjust the Number GalleryTo use lists (alpha, numeric or roman) requires to adjust the properties of the built-in galleries. It is possible to create own ones, but it seems to be too difficult to maintain them. This macro helps to adjust the number galleries 2, 5 and 7.

Adjust

2.8.8 Delete unused stylesThis macro deletes all styles which are not used an more.

Delete

This task will take up to 3 hours to check each paragraph separately! It would be quicker just to delete the styles, but we want to keep the layout information we have entered so far. This is the only solution if the old and the new style are used in parallel.

2.8.9 Convert message tables into 5 column formatThis macro should be used to convert the message tables into the five column format. It also reformats the table and assigns the correct styles as well as inserts the necessary headings.The editor has to fill in the missing information by hand.In case of the six column representation the column with the comments will be deleted. The column for the support indicator will be reused for the status information.

convert



2.8.10 Add 3rd column to tablesThis macro should be used to add a third column to the tables containing table values. It also reformats the table and assigns the correct styles as well as inserts the necessary headings.The editor can now fill in the missing information (comments) by hand.

Add

2.8.11 Reformat Message tableThis and the next macro has been provided by Scott Robertson:

Well, this is my “standard,” segment groups are indented two spaces for each grouping. [{/{[ and }]/]} order is standardized. Segment identifiers within group line up. Unbalanced [/]/{/} are reported and stop at the point that the problem is noted (the actual problem will probably be somewhere above that point.)

Note: the result looks really ugly if you have tracking on. Accepting (or hiding) the changes shows the nice, consistent Warning: this macro will remove any hyperlinking in the message structure1. Place the insertion point in the message structure table to adjust (any column/row/cell)2. Back in this document, double click on the shaded portion above3. You will be asked to select the document4. The message syntax will be adjusted to a standard form (left hand column of the message syntax table). While

processing, the current message line will be displayed in the Status Bar at the bottom of the Work window.

Reformat

2.8.12 goWhat table is this1. Place the insertion point in the table in question.2. Back in this document, double click on the shaded portion above3. You will be asked to select the document 4. The table number for the insertion point in that document will be determined and displayed in a dialog box (during

the search, progress will be noted in the Status Bar at the bottom of the Word window

What

2.8.13 Goto a specific tableIt is almost not possible to select the current table. This macro should be used to jump to a specific table according to its number. By “Try and Error” one can approach the table he/she desires. The dialog provides to complete range. Please use the left field to enter the desired number.

go

2.8.14 Get All FormatsThis macro should be used to generate a VBA procedure which can be used to adjust the styles of other documents. This macro appends VBA-code which can be copied to a new module to the end of the document. This code allows for copying the properties listed in the style guide.This code does not adjust the properties, it just copies the values to the document in a readable form. Therefor it is NOT necessary to execute it!

Get

2.8.15 Requirements to run the macrosRunning of the macros above requires VBA.

2.8.16 Manually Correcting StylesThe styles can be corrected by hand, too. Using “Format => Styles” displays a list of all used styles. Here you can modify the name of the styles by just typing in the correct name. Wherever the styles is used the new name is assigned.



2.8.17 Questions/ErrorsPlease let me know if there are questions or errors in applying these macros:

[email protected]

It would be helpful to submit the name of the macro and the name of the function and the line number – is possible.

2.8.18 History (last changes at the end) formatting column width for attribute and message tables setting styles for conformance statements additional macro to insert three columns into message table (for group names), i.e. converting into 6 column format additional macro to insert fourth column to HL/ and user-defined tables for comment additional macro to jump to a specific table (go to table) formatting of TOC corrected description of TOC added formatting for component table styles added#20 note to balloters preparing documents for publishing no component definition within the field definitions filename conventions additional guidelines and formats on lists new macro for adjusting the necessary gallery entries heading and title capitalization#21 adjusting definition of message tables to fit the five column representation adjusting the macro to convert message tables into the five column representation adjusting the column width for message tables in the format table macro#22 Joann’s comments added Scott’s macros added Increased font size for components and HL7 and User-defined table captions#23 introduction on how to enable macros new page margins before/after paragraph spaces adjusted to normal, note and body of tables setting character styles

2.9 PROCEDURESThis section is intended to give some hints how to fight Word best.

2.9.1 Procedure for Troubleshooting Normal List Alpha

Clearing Number Gallery

Step ID Step Description Result Comment

1 After running the macros go to the first instance of Normal List Alpha in your document.

2 Highlight the first item and go to the Format tab. (You may optionally do a right click)

3 Select "Bullets and Numbering"

4 Select the Numbering tab 8 boxes will appear

5 Select each box, in turn, except for "None" and do


mailto:[email protected]


"Reset".

6 Select the "lower case alpha" box and go to customize

7 On the "Customized Numbered List", set Number Position Aligned At to .7

8 Set Text Position Indent At to .9

9 Return to previous window and select "Okay" This should clear the "gallery"

10 Go to the next instance of your Normal Alpha List

11 If the style looks correct except for the number, select Format -> Bullets and Numbering->

12 Select the correct box (lower case alpha) and select Restart Numbering

13 If the style was not correct in step 11, re-apply the style before going to step 13.

2.9.2 Troubleshooting styles that change erraticallyProblem: A change is manually applied to the Style. When the document is saved and then re-opened, the style change is lost.

Clearing Previous Templates


1 Select Tools/Templates and Add-Ins Templates and Add-Ins window will display

2 Inspect Document Template box. Delete HL73.dot if it is there.

HL73.dot was the template for the previous version.

3 Inspect the Automatically Update Document Styles indicator. It should not be activated.

4 Select okay If you later return to this window you may find that Word has assigned the normal.dot template. However, this does not seem to interfere. The important thing is that the Auto Update flag is de-activated.

5 Return to document and manually correct any styles that are not right.

In particular you may need to reset galleries. See table above.

2.9.3 Procedure for inserting a pictureThis procedure should work for pictures, diagrams or flowcharts.

Preparing and Inserting a Picture


1 Create and save the picture in the appropriate application, e.g., Visio

2 Open the chapter and go to the place you want to insert the picture.

HL73.dot was the template for the previous version.

3 Choose Insert/Object/Create From File Your visio file should be one of the choices

4 Open Your picture It should be visible in the normal



should display. view mode.

2.9.4 Troubleshooting the macro Format All Tables

Format All Tables: Common Errors

Error ID Description Action Required Comment

4605 This command is not available

Go to Debug and read message

"ForegroundPatternColorIndex = wdAuto"This statement seemed to be in the General Section; Format Tables in a subsection on formatting borders.I just went on to the next macro assuming I would take care of the problem manually later.

Query tables in my chapter that do not conform to the standard formatting.

I just had to re-start the macro with a table number past the messed up table.

the table did not have columns with consistent widths.

This took a little more investigation. I finally found that some of the added rows had an extra column at the end that was set to a 0" width. I had to insert some more rows, move the cells contents I wanted to keep, and then delete the offending rows.

"Message Table does not contain 5 columns! Abort?"

Run "convert message tables into new format" first?

5941 The requested member of the collection does not exist.

Go to Debug


HL7 V2.4 Style Guide€¦ · Web viewThis Style Guide assumes the use of MS Word 97 SR-2 or a...

Documents

Transcript of HL7 V2.4 Style Guide€¦ · Web viewThis Style Guide assumes the use of MS Word 97 SR-2 or a...