Hardware Catalogue

7
HARDWARE CATALOGUE 2016 PRICING

description

Drones

Transcript of Hardware Catalogue

Page 1: Hardware Catalogue

HARDWARE CATALOGUE

2016 PRICING

Page 2: Hardware Catalogue

Fixed-wing eBee

eXom quadcopter

Fixed-wing eBee RTK

www.airinov.com

Drones

The eBee is an automated glider designed for maximum ease of use. It is light (just 700g), robust and fully automatic and can cover up to 120ha in a single flight, operating in complete safety (at a height of 150m).Key features: high-quality data, flying time, reliability of flight system electronics.

The eBee RTK features a special mo-dule, providing high-precision GPS data correction.Key features: compatible with the majority of differential GPS systems (physical or virtual), quick to get going with.

eXom is an intelligent multirotor drone designed for inspection and high-resolution 3D modelling work.With its motion-stabilised multi-sensor camera head (supporting HD video, photo and thermal image capture), it is the ideal tool for capturing data in the trickiest of situations.Key features: the device's position sensors leave the operator free to concentrate on image acquisition rather than piloting the drone.

All drones are sold in a reinforced travel case with 2 batteries and all accessories required for immediate use (charger, modem, remote control, etc.).

€13,700 + taxes €26,400 + taxes

€27,500 +taxes

Page 3: Hardware Catalogue

www.airinov.com

Sensors

Canon S110 RGB12MPvisible: 450-660nm

Sony WX18.2MPvisible, automatic

Canon S110 RE12MP red edge: 450-715nm

Canon S110 NIR 12MPnear infrared: 550-850nm

The Canon S110 RGB is a photo sensor operating in the visible region of the spectrum. It offers fully configurable exposure settings, with files saved in RAW format (uncompressed RGB data).

The Sony WX is fitted to eBees. The device's 18.2MP resolution provides high-resolution photographs for the entire flight duration. Specially adapted to work with the eBee, the sensor is triggered and powered by the drone with no user adjustments required.

The Canon S110 NIR is a photo sensor operating in the near-infrared (NIR) region of the spectrum. It outputs data in the Green, Red and Near-Infrared (NIR) regions, corresponding to the reflectance peaks associated with biomass plants. Its exposure settings are fully adjustable, with files saved in RAW format.

The Canon S110 RE operates within the Red Edge region of the spectrum. It outputs data in the Blue, Green and Red Edge regions, corresponding to the reflectance peaks associated with chlorophyll. It features adjustable exposure settings, with files saved in RAW format.

€730 + taxes

€455 + taxes

€1,100 + taxes

€1,100 + taxes

Page 4: Hardware Catalogue

w

ThermoMAP 640x512 pixelsInfrared: 8-14 µm

Agricultural imaging sensors

Thermal imaging cameraThermoMAP is a thermal imaging camera specifically adapted for use with the eBee and eBee RTK, enabling the device to be used to produce still pictures and video for thermal mapping applications (irrigation, inspection of solar panels, etc.). It captures data within a temperature range of -40°C to 160°C to a resolution of 0.1°C.

www.airinov.com

Sequoia PARROT 5 sensorsmultispectral + RGB

MultiSPEC 4C 4 x 1.2MP multispectralsensors:550, 660, 735, 790nm

The MultiSPEC 4C is a multispectral sensor developed by AIRINOV in partnership with INRA. Its 4 sensors are each designed to capture separate regions of the spectrum, each carefully selected to provide accurate crop analysis. The built-in lux meter compensates for light level variations. It is built on AIRINOV's extensive agricultural imaging expertise, with more than 5,000 hours of data captured since 2011, making it the leading multispectral imaging device in its field. A number of industry-recognised models have been produced for agricultural use, along with decision-making tools for both the management of large-scale nitrogen fertilisation and experimental monitoring. Specially adapted to work with the eBee, the sensor is triggered and powered by the drone with no user adjustments required.

This robust, customisable device is sold in its Agrosensor format for compatibility with all drone platforms. For bespoke applications, the MultiSPEC 4C can be customised to capture other spectral regions.

A successor to the MultiSPEC 4C, the Sequoia comes with 4 multispectral sensors plus an additional RGB sensor. Its small size and two-stage design with separable Sunshine sensor make it suitable for any type of drone.

€3,200 + taxes

€12,800 + taxes

€4,990 + taxes

Page 5: Hardware Catalogue

w

eBee battery

eXom battery

eBee wings Pair of wings for the eBee or eBee RTK

Consumables

Lithium Polymer (LiPo) 2150 mAh / 11.1 V battery for use with the eBee. Approximate flying time 40 minutes.

Lithium Polymer (LiPo) 8500 mAh / 11.1 V battery for use with the eXom. Approximate flying time 20 minutes.

2x EPP wings with fixtures and ready-to-use wing flaps

www.airinov.com

eBee accessory kit This additional accessory kit includes: 3 x eBee batteries, 2 x eBee battery chargers, 1 x 12V ground controller battery, cables and battery grips, 1 x 12/230V voltage converter, 1 x 4G LTE USB memory, 1 x spare antenna for eBee modem.

eBee battery charger:

eXom battery charger:

€110 + taxes

€230 + taxes

€86 + taxes

€275 + taxes

€200 + taxes

€2,000 + taxes

Page 6: Hardware Catalogue

Software & accessories

www.airinov.com

*prices are non-binding and for information only

Radio Tracker Tracking transmitter-re-ceiver

E-Motionfor use with eBee and eBee RTK E-MotionSoftware and updates for use with eXom.

Pix4D Mapper ProSingle-user licence For multi-user licences, please contact our sales department.

Camera protectionkit

If you are intending to fly your eBee in extreme conditions or over wide areas, this accessory will prove to be secure. Including a small transmitter and portable receiver, ensure you can locate your drone at all times.

eMotion is the truly intuitive mission planning and simulation tool. It automatically generates flight plans and ensures that you are in continual contact with the drone and can control it at any time during the mission.

The Pix4D Mapper Pro will transform photographs captured in flight into 3D data in just a few clicks. Designed specifically for mapping and 3D modelling applications, it will generate orthophotos, digital elevation models and scattergrams and take required measurements from your data (lengths, volumes, surface areas).

The kit is ideal when using the eBee or eBee RTK in sandy, dusty or tropical conditions. It is inserted into the camera bay, protecting the sensor in any conditions. The kit includes a lens cap, spare protective films, cloth and spray cleaner.

€91 + taxes

€1100 + taxes

€4,100 + taxes

Page 7: Hardware Catalogue

www.airinov.com