Access Hardware Architectural Catalogue

ACCESS H

ARDW

ARE LT

D.

AR

CH

ITE

CT

UR

AL | T

HE

CO

MP

LET

E C

OLLE

CT

ION

AH

14V

2

GET IN TOUCH

Access Hardware LtdUnit 35 | Monkspath Bus Prk Solihull West Mids | B90 4NZ

T: 0121 667 8054F: 0121 667 8055E: [email protected] - Friday 8:30am - 5pm

Access Hardware only sell to trade, please contact our friendly staff to find your nearest stockist.

THE COMPLETE

COLLECTIONARCHITECTURAL

2015

Manufacturing quality,prioritising service

Since 1985 we have been helping customers pick the best products to meet their requirements.

A recent expansion has allowed us to increase stock levels and work on developing our product range.

With the addition of a product designer to our team we can now offer bespoke product design and branding.

GET IN TOUCH




CARE INSTRUCTIONSTHE DOS & DONTS

7 Dont leave dirt to build up on the surface - it lessens the corrosion resistance

7 Dont use abrasive cleaning agents as they will damage the surface of the product

7 Dont use carbon steel brushes or wire wool. They leave deposits that rust

3 Do wipe the surface regularly with a damp clean cloth

3 Do use a mild detergent or soap to clean the surface on a regular basis

3 Do replace mild detergents with a mild non scratching cream for more stubborn spots

3 Do rinse off any detergents or soap with warm clean water & dry with a towel

STAINLESS STEEL LEVER ON ROSE

A series

B series

B series Slimline

C series

CHROME PLATED LEVER ON ROSE

D series

E series

LEVER ON PLATE J series

K series

M series

N series

W series

ACCESSORIES Hinges

Latches

Locks

Door stops

Coat hooks

Symbols

Numerals

Letter plates

Letter tidies

Cylinder pulls

Flush bolts

Finger plates

PULL HANDLES Pull handles

Grab rails

Doc M

CABINET HANDLES

LOCKWOOD

CONTENTS

03

19

33

49

67

77

81

Friendly Service

SSS Satin Stainless Steel

PSS Polished Stainless Steel

DSS Duo Stainless Steel (Mixed Polished and Satin Stainless Steel)

DB Duo Black (Mixed Polished & Black Chrome Plate)

DZ Duo Zinc (Mixed Polished and Satin Chrome)

DA Duo Aluminium (Mixed Polished and Satin Chrome)

SC Satin Chrome

SN Satin Nickel

PC Polished Chrome

PA Polished Aluminium

PB Polished Brass

PCW Powder Coated White

Our Promise

Value forMoneyQuality

Products

OUR FINISHES

Our Promise

Stainless Steel

a SERIES

Rose thickness 10mmRose dia 52mmLever length 125mmProjection 68mm

FD30/60 Bolt through and screw fixings includedPush fit Rose Microtight spindle, SprungSSS & PSS

A10 STRAIGHT

Rose dia 52mmLever inside length 96mmComplies to BS8300 (DDA compliant)FD30/60 Push fit rose Bolt through and screw fixings includedMicrotight spindleAvailable models below:

A12 RETURN TO DOOR

A12 UnsprungRose thickness 5mmLever dia 19mmLever inside projection 47mmSSS

A12 19mmRose thickness 10mmLever dia 19mmLever inside projection 52mmSSS, PSS

A12 22mmRose thickness 10mmLever dia 22mmLever inside projection 60mmSSS

A12 GRADE 3Need heavy duty?

[email protected] Tel: 0121 667 8054 04

CONCEALED FIX | PUSH FIT ROSE | FIXINGS SUPPLIED

Stainless Steel

a SERIES A12 GRADE 3Need heavy duty?

Rose thickness 10mmLever dia 19mmLever inside projection 50mm

Conforms to EN 1906:2010 37-1130BConforms to BS8300 (DDA compliant)Tested to 200,000 cyclesFD30/60 Push fit Rose Bolt through and screw fixings includedMicrotight spindle, SprungSSS

A12 GRade 3

TESTED TO 200K CYCLES SAFETY LEVER

05

96mm

50m

m

54mm

Rose dia 54mmLever length 125mmLever projection 61mm

FD30/60 Push fit Rose Bolt through and screw fixings includedMicrotight spindle, SprungSSS & PSS

B13 T BAR LEVER

B15 3 RINGSRose dia 54mmLever length 125mmLever projection 61mm

FD30/60 Push fit RoseBolt through and screw fixings includedMicrotight spindle, SprungSSS & PSS

Stainless Steel

B SERIES


MITREDThe

LeverCONCEALED FIX | PUSH FIT ROSE | FIXINGS SUPPLIED | ROSE THICKNESS 10MM

Stainless Steel

B SERIES


FD30/60 Push fit RoseBolt through and screw fixings includedMicrotight spindle, SprungSSS & PSS

B14 MITRED

MITREDThe

LeverCONCEALED FIX | PUSH FIT ROSE | FIXINGS SUPPLIED | ROSE THICKNESS 10MM

MODERN DESIGNCONCEALED FIX ROSE

07

64m

m 10m

m

126mm

Rose thickness 10mmRose dia 52mmLever length 136mmLever projection 70mm

FD30/60 Push Fit RoseBolt through and screw fixings includedMicrotight spindle, SprungSSS & PSS

B17 ARCHED

Best seller

08

70m

m

136mm

10m

m

DUO FINISH

B33 DUO FINISHRose thickness 10mmRose dia 52mmLever length 134mmLever projection 70mm

FD30/60 Push Fit RoseBolt through and screw fixings includedMicrotight spindle, SprungDSS


Best seller

19m

m

134mm

10m

m

70m

m


ESCUTCHEONS THUMB TURNSCONCEALED FIX | PUSH FIT ROSE | WOOD SCREW FIXINGS SUPPLIED | DIAMETER 52MM | THICKNESS 10MM | SSS & PSS

A8210Blind escutcheon

A8410Oval profile cylinder escutcheon

A8310Standard keyhole escutcheon

A8510Euro profile cylinder escutcheon

B Series

SLIMLINECONCEALED FIX | PUSH FIT ROSE | FIXINGS SUPPLIED | ROSE THICKNESS 6MM



Push Fit RoseFD30/60 Bolt through and screw fixings includedMicrotight spindle, SprungSSS & PSS

B50 CURVED

B51 ARCHEDRose dia 52mmLever length 132mmLever projection 65mm

Push fit RoseFD30/60 Bolt through and screw fixings includedMicrotight spindle, SprungSSS & PSS

B Series

SLIMLINE B52 COMFORT


Push Fit RoseFD30/60 Bolt through and screw fixings includedMicrotight spindle, SprungSSS & PSS

B52 COMFORT

Try me for comfort

COMFY HANDLE

SLIMLINE ROSE

13

Now all the bits

TO match...CONCEALED FIX | PUSH FIT ROSE | WOOD SCREW FIXINGS SUPPLIED | THICKNESS 6MM | SSS & PSS

bathrooms

A8306Standard keyhole

escutcheon

A8406Oval profile

cylinder escutcheon

A8506Euro profile

cylinder escutcheon



C SERIESCONCEALED FIX | SCREW ON ROSE | FIXINGS SUPPLIED | ROSE THICKNESS 8MM | DSS FINISH

Rose dia 52mmLever length 122mm Lever projection 68mmDSS

Screw on RoseBolt through and screw fixings includedMicrotight spindle, Sprung

C30 WAVE

C33 STRAIGHTRose dia 52mmLever length 135mmLever projection 65mm

Screw on RoseBolt through and screw fixings includedMicrotight spindle, Sprung*Also available on B series rose* - page 11

UNIQUEBEVELLED EDGE

5MM SPINDLE | SCREW FIXING SUPPLIED

USED WITH L5045SZ & L5057SZ BATHROOM LOCKS - PAGE 55

C8308Standard keyhole escutcheon

C8408Oval profile cylinder escutcheon

C8508Euro profile cylinder escutcheon

C9008Bathroom turn and release with no indicator

C9708Disabled Bathroom turn and release with indicator


ESCUTCHEONS & TURNSC SERIES5MM SPINDLE | SCREW FIXING SUPPLIED

USED WITH L5045SZ & L5057SZ BATHROOM LOCKS - PAGE 55

Did you know weve been around since 1985? This means

our market-leading expertise in architectural ironmongery is built on 30 years of experience .


Chrome Plated

D SERIES D22 WINGEDPeoples Choice


Screw on RoseBolt through and screw fixings includedMicrotight spindleSprungDA finish

D20 WAVE

D23 STRAIGHTRose dia 50mmLever length 123mmLever projection 62mm


CONCEALED FIX | SCREW ON ROSE | FIXINGS SUPPLIED | ROSE THICKNESS 10MM

Chrome Plated

D SERIES D22 WINGEDPeoples Choice

D22 WINGEDRose dia 50mmLever length 120mmLever projection 70mm


LOOKS GREAT!

DUO FINISH ROSE

ERGONOMIC HANDLE

21

70m

m

120mm

24m

m

10m

m

D21 BROAD

D21 broad


SCREW ON ROSE

MIXED SATIN & POLISHED FINISH

Rose Thickness: 10mmRose Diameter: 50mmLever Length: 124mmLever Projection: 58mm

Screw on RoseBolt through & Screw fixings includedMicrotight SpindleSprungDA Finish

58m

m

137mm

50mm

Rose thickness 10mmRose dia 50mmLever width 20mmLever length 126mmLever projection 64mm


CURVED

D25 slim

D24


Rose Thickness: 10mmRose Diameter: 50mmLever Length: 122mmLever Projection: 52mm

Screw on RoseBolt through & Screw fixings includedMicrotight SpindleSprungDA Finish

Chrome Plated

D41 OFFSET

D41 OFFSETRose thickness 10mmRose dia 54mmLever length 130mmLever projection 63mm

Screw on RoseBolt through and screw fixings includedMicrotight spindle, SprungDZ finish


TO match...

Chrome Plated

D41 OFFSETNow all the bits

TO match...EscutcheonsConcealed FixScrew on RoseWood Screw fixings suppliedThickness 10mmDZ finish

Bathroom TURNConcealed fixScrew on RoseThickness 10mmWood screw fixings suppliedDZ finish

Used in conjunction with L5045SZ & L5057SZBathroom locks page 55

D8310Standard keyhole

escutcheon

D9010Bathroom turn and release

with no indicator

D8510Euro profile cylinder

escutcheon


Modern & Functional

THE PERFECT BALANCE

THE D43 IS A CONTEMPORARY LEVERWITH A TWIST, AN ULTRA MODERN BLACK FINISH.

D43 BLACK CHROMERose thickness 10mmRose dia 50mmLever length 128mmLever projection 60mm

Screw on RoseBolt through and screw fixings includedMicrotight spindleDB

THE FUTURE IS HERE

Modern & Functional

26

Modern & Functional

THE PERFECT BALANCE

THE D43 IS A CONTEMPORARY LEVERWITH A TWIST, AN ULTRA MODERN BLACK FINISH.

THE FUTURE IS HERE

D8310Standard keyhole escutcheon

Concealed FixScrew on RoseWood Screw fixings suppliedThickness 10mmDB

D9010Bathroom turn and release with no indicator

Concealed fixScrew on RoseThickness 10mmWood screw fixings suppliedUsed with L5045SZ & L5057SZ Bathroom locks page 55DB

Modern & Functional


Chrome Plated

e SERIES


Rose 52mm squareLever length 132mmLever projection 67mm

Bolt through and screw fixings includedMicrotight spindle, Sprung DZ finish

E60 ARCHED

E62 STRAIGHTRose 52mm squareLever length 135mmLever projection 68mm


Sleek, simple & ultra modern

CONCEALED FIX | GRUB SCREW FIX ROSE | FIXINGS SUPPLIED | ROSE THICKNESS 10MM

Chrome Plated

e SERIESSleek, simple & ultra modern

E61 CUBERose 52mm squareLever length 130mmLever projection 67mm


THE ARCHITECTS CHOICE

DUO FINISH HANDLE

GRUB SCREW FIXING ROSEART DECO

STYLE

52mm

130mm

29


ESCUTCHEONS & TURNS

E8310Standard keyhole escutcheon

E9010Bathroom turn and

release with no indicator

EscutcheonsConcealed FixGrub screw fit roseWood Screw fixings suppliedThickness 10mmDZ finish

Bathroom turnsConcealed fixGrub screw fit roseThickness 10mmWood screw fixings suppliedDZ finish

Used in conjunction with L5045SZ & L5057SZ Bolt through Bathroom locks page 55

E8510Euro profile cylinder escutcheon

E9710Disabled Bathroom

turn and releasewith indicator

CONCEALED FIX | GRUB SCREW FIX ROSE | WOOD SCREW FIXINGS SUPPLIED | 5MM SPINDLE | ROSE THICKNESS 10MM

CONCEALED FIX | GRUB SCREW FIX ROSE | WOOD SCREW FIXINGS SUPPLIED | 5MM SPINDLE | ROSE THICKNESS 10MM

0121 667 8054

At Access Hardware we dont stand still; our product range is constantly evolving

to meet the needs of our customers.

Lever on Plate

J SERIES

JI2151Lever on Latch Plate

Plate size 46mm x 165mm x 10mmGrub screw fit plateMicrotight spindleBolt through fixings includedConcealed fix SprungSSS

ZINC DIE CASTINNER PLATE

SAFETY LEVER

GRUB SCREWFIXING PLATE

CONCEALED FIX | BOLT THROUGH FIXINGS SUPPLIED | SSS FINISH

34

Lever on Plate

J SERIES

J12153Standard Keyhole profile

57mm centres

J12155Euro profile

47.5mm centres

J12154Oval profile

48.5mm centres

J12157Disabled bathroom turn and release57mm centres


SAFETY LEVER

CONCEALED FIX | BOLT THROUGH FIXINGS SUPPLIED | SSS FINISH

Lever on Plate

K SERIES

K121Lever on Latch Plate

Plate size 46mm x 245mm x 10mmPush fit plateMicrotight spindleSprung


DDA CENTRESSAFTEY LEVER

LONGER PLATE

FIXING SUPPLIED | CONCEALED FIX | 10MM THICK PLATE

Lever on Plate

K SERIES

K123Standard Keyhole profile

57mm centers

K125Euro profile

72mm centers

K127Disabled bathroom turn and release78mm centres


FIXING SUPPLIED | CONCEALED FIX | 10MM THICK PLATE

K2211saLever on Latch Plate

Plate size 45mm x 180mm x 10mmMicro tight spindle

Introducing

WINGED LEVER ON BACKPLATE


THE BESTSELLING

MODERN DESIGN

EASY TO FIX

SURFACE FIXED | SCREW FIXINGS SUPPLIED | SA FINISH

Introducing

WINGED LEVER ON BACKPLATE

K2213SALever on Standard

Lock Plate

57mm centres

K2215SALever on Euro profile Plate

47.5mm centres

K2216SALever on Bathroom Lock Plate

57mm centresHanded Left and Right



Entry Level

M SERIES

Victorian Scroll Lever on Bathroom Plate

57mm centresPlate size: 40mmx153mmx10mmLever length 95mmLever projection 55mm

M01016

Victorian Scroll Lever on Lock Plate

57mm centresPlate size: 40mm x 153mm x 10mmLever length 95mmLever projection 55mm

M01013

SURFACE FIXED | SCREW FIXINGS SUPPLIED | PB, PC & SC FINISH


Entry Level

M SERIES

Victorian Scroll Lever on Lock Plate


M01013Victorian Scroll Lever on Latch Plate

Plate size: 40mm x 108mm x 10mmLever length 95mmLever projection 55m

M01011

SURFACE FIXED | SCREW FIXINGS SUPPLIED | PB, PC & SC FINISH

VICTORIAN SCROLL LEVER


COMFY HANDLE

AVAILABLE IN 3 FINISHES

TRADITIONAL PLATE

Looking for something more


TRADITIONALSURFACE FIXED | SCREW FIXINGS SUPPLIED | PC FINISH

Victorian Lever on Latch plate

Plate size: 40mm x 108mm x 10mmLever length 100mmLever projection 45mm

Surface fixedScrew fixings suppliedPC Finish

Mo2011

Looking for something more

Victorian Lever on Bathroom plate


M02016

Victorian Lever on Lock Plate

57mm centresPlate size : 40mm x 153mm x 10mmLever length 100mmLever projection 45mm

M02013


SURFACE FIXED | SCREW FIXINGS SUPPLIED | PC FINISH

N SERIES

n2616Curved lever on bathroom plate

57mm centresPlate size 32mm x 168mmLever length 123mm

n2611Curved lever on latch plate

Plate size 32mm x 168mmLever length 123mm

[email protected] Tel: 0121 667 8054

SA FINISH


N SERIES

n2613Curved lever on lock plate

57mm centresPlate size 32mm x 168mmLever length 123mm


LOCK PLATE

CURVED LEVER

SA FINISH

SURFACE FIXED | SCREW FIXINGS SUPPLIED | SA FINISH New

W SERIESSURFACE FIX PLATE | MICROTIGHT SPINDLE | SCREW FIXINGS INCLUDED | SPRUNG | SSS

W121Lever on Latch Plate

Plate size 162mm x 162mm2mm thickLever dia 19mmLever length 135mmLever projection 65mm

46

W SERIES

W125Lever on Euro

Profile Plate

72mm centres

W127L/RLever on Disabled Turn and Release Plate

78mm centres

Right hand INSIDE

OUTSIDE

LeftHand

DOOR OPENING IN

DOOR OPENING OUTINSIDE

OUTSIDERight hand

LeftHand

HANDING CHART


Dont forget to check out our brand new website at

www.accesshardware.co.ukwhere you can view our

latest products and news.

HINGES

H3013x2.5 ball bearing hinge

3 x 2.5 inch x 2mmDouble Ball BearingFire rated FD30/60 BSEN 1363-1:1999SSS

H3023x2 ball bearing hinge

3 x 2 inch x 2mmDouble Ball BearingSSS & PSS

H3033x2 Washered hinge

3 x 2inch x 2mm4 washersSSS & PSS

50

H4024x3 radius hinge

4 x 3 x 2.5mmRadius cornersFire rated FD30/60 Grade 13 & BS EN 1935:2002/AC:200SSS

H4014x3 ball bearing hinge

4 x 3 x 2.5mmStraight cornersFire rated FD30/60 Grade 13 & BS EN 1935:2002/AC:200SSS & PSS


Introducing the new


T122Adjustable spring hinge

4 x 3 inch Spring power adjustableScrew fixings suppliedSSS

t120Spring hinge

AdjustableSpring power adjustableScrew fixings supplied90mm high52mm wideSSS 316

T121Unsprung hinge

Screw fixings supplied90mm high52mm wideSSS 316

SPRING HINGES

H403 L/R

4 x 3 inch Right hand hinge pictured SSS

Introducing the new

RISING HINGE


NEW

Rising Butt Hinge

LATCHES & LOCKS

l01Bolt through tubularmortice latch

2.5 inch / 45mm backset3 inch / 57mm backsetSuitable for all sprung leversDust socket includedFire rated FD30/60 SZ, PB & PC

L01Rebate Kits

Rebate kit to suit L01 latchesSZ & PB

L53Bathroom Deadbolt

2.5 inch / 45mm backset3 inch / 57mm backset5mm followerBolt through holesSZ


L51Bolt through 3 lever lock

2.5 inch / 45mm backset3 inch / 57mm backsetSupplied with 2 keysSuitable for all sprung leversSZ & PB supplied as 1 product

L50Bolt through bathroom lock

2.5 inch / 45mm backset3 inch / 57mm backsetDust socket includedSuitable for all sprung leversSZ


DOOR STOPSX2875Wall door stop

16 x 75mmScrew fixing suppliedSSS & PSS

X2877Skirting door stop on rose

75mm projection on a small face fix roseRose 37dia x 2mmScrew fixings suppliedSSS & PSS

X2876Wall door stop on rose

16 x 75mm door stop50 x 8mm concealed roseScrew fixings suppliedSSS & PSS


DOOR STOPS

x2840Oval door stop

40mm diameter25mm highScrew fixing supplied SSS, PC & SC

x2830Floor door stop

30mm diameter40mm highScrew fixing supplied SSS, PSS & SC


COAT HOOKS

t501Cylindrical Coat hook with buffer

65mm projection50mm roseConcealed FixScrew fixings suppliedSSS

t500Cylindrical Coat hook with buffer

90mm projection50mm roseConcealed FixScrew fixings suppliedSSS & PSS


T504Coat hook with buffer

20mm wide | 50mm high35mm projection

Screw fixings suppliedSA

T510Coat hook with buffer

44mm projection | 20mm wide4mm thick | 60mm highScrew fixings supplied

SSS & PSS


T512Coat hook without buffer

18mm wide | 47mm projectionScrew fixings supplied

SSS

t511Small double coat hook

23mm Projection54mm wide28mm highScrew fixings suppliedPC, PB

59


T520Hat & Coat hook with buffer

92mm projection24mm wide4mm thick70mm highScrew fixings suppliedSSS

T521Hat & Coat hook with buffer

44mm projection 20mm wide x 4mm thick x 110mm highScrew fixings suppliedSSS & PSS

HATS & COAT HOOKS

t513Large hat and coat hook

52mm Projection24mm wide90mm highScrew fixings suppliedPC, PB

[email protected] Tel: 0121 667 8054

POLISHEDCHROME FINISH

BRASS FINISH

EASY TO FIX

61

90MM HIGH

SYMBOLS75MM DIAMETER | SCREW FIXINGS INCLUDED | SSS & PSS

X2004Unisex Sign

X2001Male sign

X2007Baby Change Sign

X2005Shower Sign

X2002Female sign

X2008SPush SymbolSSS only

X2006W/C Sign

X2003Disabled Sign

X2009SPull SymbolSSS only


75mm high | Screw fixings supplied | SSS & PSS

SYMBOLS


X2020 Fire Door Keep

Shut Sign

X2021Fire Door Keep

Locked Sign

X2022Automatic

Fire Door Keep Clear Sign

X2023Fire Door Keep

Clear Sign

NUMERALS75mm high | Screw fixings supplied | SSS & PSS

LETTERS75mm high | Screw fixings supplied | SSS & PSS

X21300-09Available 0-9

X21310-13 Available A-D

LETTER PLATE

X9412Letter plate

305 x 102mm sprungAperture 250 x 50mmBolt Centres 278mm Bolt through fixings suppliedGrade 316 for external useSSS & PSS

X95 Internal Letter Tidy

Available:280 x 80mm in PSS320 x 90mm in SSS & PSS

LETTER TIDY


CYLINDER PULL

X705Euro profile Cylinder pull

30mm projection43mm wideGrade 316 for external useScrew fixings suppliedSSS & PSS

FLUSH BOLTS

X41 25mm Flush Bolt

Available: 200 x 25mmFixings suppliedSSS

X40 19mm Flush Bolt

Available: 150 x 19mm / 200 x 19mmFixings suppliedSSS & PSS


X25300 x 75mm350 x 75mm450 x 75mmScrew fixings suppliedSSS & PSS

X25 PRINTED 300 x 75mm printed pushSSS & PSS


FINGER PLATES

FINGER PLATES

D shaped

PULL HANDLES

P12 BACKPLATEPull Handle on Plate

Surface fix only19 x 225mm on 300 x 75mm plate: SSS PSS19 x 400 on 450 x 75mm plate: SSS22 x 400 on 450 x 75mm plate: SSS

EASY TO FIX PLATE

D SHAPE PULLHANDLE

BT = BOLT THROUGH | BB = BACK TO BACK PAIR

68

D shaped

PULL HANDLESP12Tubular D Pull Handle

Bolt Through fixings suitable for timber doors. Glass fixings available to order Back to Back fixings suitable for glass & timber doors

Round Roses available for 19mm dia handles only

SIZES, FINISHES & FIXINGS19 x 150 SSS PSS BT BB

19 x 225 SSS PSS BT BB

19 x 300* SSS PSS BT BB


19 x 600* SSS BT BB


25 x 300* SSS BT BB

25 x 425* SSS BT

25 x 450* SSS BT BB

25 x 600* SSS BT BB



32 x 900* SSS PSS BT

32 x 900* SSS BB

*DDA compliant



Duo Curved Pull Handle

25 x400mm DSS | BT | BBBolt Through fixings suitable for timber doors

Glass fixings available to order

Back to Back fixings suitable for glass & timber doorsDDA compliant

P25

Semi Circular Pull Handle

25 x 250 SSS BT BB32 x 300 SSS PSS BT BB (DDA compliant)Bolt Through fixings suitable for timber doors


Back to Back fixings suitable for glass & timber doors

P63

ENTRANCE HANDLES



Straight Pull Handle

19 x 263mm SSS BT32 x 450mm SSS PSS BT BB32 x 600mm SSS PSS BT BBBolt Through fixings suitable for timber doors



P69

Banana Pull Handle

25 x 450mm SSS BT BB25 x 600mm SSS BT BBBolt Through fixings suitable for timber doors



P67



GRABRAILS

SIZES AVAILABLE19 x 300 SSS PSS

19 x 400 SSS PSS

19 x 600 SSS

22 x 400 SSS PSS

25 x 300 SSS

25 x 425 SSS

25 x 450 SSS

25 x 600 SSS

32 x 450 SSS PSS

32 x 600 SSS PSS

32 x 900 SSS PSS

SIZES AVAILABLE19 x 300 SSS PSS

19 x 400 SSS PSS

19 x 600 SSS

22 x 400 SSS PSS

25 x 300 SSS

25 x 450 SSS

25 x 600 SSS

32 x 450 SSS PSS

32 x 600 SSS PSS

32 x 900 SSS

P12-BTDTubular Grab Rail

Bolt through stainless steel disc supplied to convert P12Suitable for 10-12mm glass and 10-25mm boardLonger bolts are available to order for up to 46mm board

DDA compliant

P12-BBGTubular Grab Rail

Back to back pairSuitable for 10-12mm glass and 10-46mm boardDDA compliant

C ONVER TER

72

ROUND ROSEC ONVER TER

RRRound rose pair

To convert bolt through pull handles to a surface fix grabrail.

Compatible with 19mm dia pull handlesSold as a pair to convert one pull handle

SSS PSS

D SHAPED

HANDLE

CONC

EALED

FIX

73

GRABRAILSD GRAB RAIL ON RO SE

P72D Grab Rail on Rose

32mm dia x 600mm CCSurface Fix OnlyPCWSSSPSS

doc m pack

HARDWARE

WHITE POWDER

COATED

SSS FINIS

H

CONCEA

LED

FIX ROSE

74

D GRAB RAIL ON RO SE

doc m pack

HARDWAREP80Hinged Grab rail

32mm dia x 600mmBase size 120 x 280mm

PCW

P81Cushioned Back Rest

32mm dia x 400mm widthCushion size 140mm x 280mmProjection 240mmPCW


doc m pack

SCENARIOS

Vertical Grabrail

compartment

cornerpeninsular

Vertical Grabrail

Hinged Grabrail

Hinged Grabrail


doc m pack

SCENARIOS

classicD SHAPED TUBULAR CABINET HANDLES

P1200D Shaped tubularcabinet handle

Available sizes

10 x 96mm CC Finishes available PC, SC & SN

10 x 100mm CC Finishes available SSS & PSS

10 x 150mm CC Finishes available SSS,PSS PC & SN

D SHAPED

AVALIABLE IN DIFFEREN

T

FINISHES

78

classicP1104 BOWBow shaped Cabinet Handle

Available sizes10 x 128mm CC 10 x 192mm CC 10 x 288mm CC PC, SN

P1105 T-BART Bar Cabinet Handle

Available sizes10 x 64mm CC, 124mm OA 10 x 160mm CC, 220mm OA 10 x 256mm CC, 335mm OA10 x 416mm CC, 495mm OA10 x 640mm CC, 720mm OAPC, SN


DESIGNER

P1101C Cut out cabinet handle

Available sizes192mm c/c 255 OA320mm c/c 382 OAPA

P1102D Cut out cabinet handle


P1103Curved Cabinet handle

Available sizes160mm c/c 192mm OA192mm c/c 255mm OAPC


P1102D Cut out cabinet handle


DIGITAL LOCKS

000021002 Digital DX Deadlatch

Suits right or left hand doors opening in Outward opening option available on requestSuitable for door thickness 32-45mm60mm backsetHold-back functionSC

053001530 Digital DX Entrance Set

Suitable for door thickness 35-45mm60mm backsetSC

DISABLED TURN

COMPLETE WITH

LATCH

82

355 DeadlockSuitable for hinged and some sliding doorsLockable turn knob with inbuilt clutching device to resist wrench attackStrong interlocking case and mounting plate to resist jemmy and hammer attackConcealed fixingPositive deadlocking actionOpened by key from outside and by turn knob from inside when free. Internal key locks or unlocks turn knob.SC

Suitable for hinged and some sliding doorsLockable turn knob with inbuilt clutching device to resist wrench attackStrong interlocking case and mounting plate to resist jemmy and hammer attackConcealed fixingPositive deadlocking actionThe mechanism and the design are protected by Australian and International Patents and Design RegistrationsOpened by key from outside and by turn knob from inside. SC

303 deadlock

83

TERMS OF SALE1 Invoices will be due for payment at

the end of the month following that of delivery.

2 Shortage and damages must be reported within 5 working days of date of receipt of goods as shown on the accepted delivery note.

3 Printed prices are exclusive of VAT.

4 Goods will remain the property of Access Hardware Ltd until payment is received in full.

Full terms of sale are issued during credit account processing.

RETURNSAccess Hardware do not offer a sale or return policy. However, in the event that you need to return products to us for any reason they will only be accepted and credited with the following conditions and will be subject to a minimum 15% restocking charge*:

1 Goods have not been held by you for longer than a period of 3 months from the date of invoice.

2 Goods need authorization from an AH representative who will then issue a returns note to be completed by the customer.

3 Goods must be returned in the original packaging and in a re-saleable condition.

4 Goods to be returned by the customer at their cost and include relevant completed paperwork.

*Faulty or damaged products will not be subject to a re-stocking charge and will be uplifted by Access Hardware Ltd.

GUARANTEEAccess Hardware guarantee the products in this catalogue against defects in workmanship and materials subject to fair wear and tear in standard atmospheric conditions for a period of 10 years.

Access Hardware assumes no liability for:

1 Improper installation or failure to follow fitting instructions.

2 Improper maintenance or unfair wear and tear.

3 Indirect or consequential loss or damage.

4 Cost of removal and/or replacement.

5 Cost of freight and/or travelling expenses.

6 Although our stainless steel products are suitable for most applications, neither grade 304 or 316 is unconditionally guaranteed, and advice should be sought from one of our representatives.

STUFF YOU NEED TO KNOW...

Manufacturing quality,prioritising service

Since 1985 we have been helping customers pick the best products to meet their requirements.

A recent expansion has allowed us to increase stock levels and work on developing our product range.

With the addition of a product designer to our team we can now offer bespoke product design and branding.

GET IN TOUCH




CARE INSTRUCTIONSTHE DOS & DONTS

7 Dont leave dirt to build up on the surface - it lessens the corrosion resistance

7 Dont use abrasive cleaning agents as they will damage the surface of the product

7 Dont use carbon steel brushes or wire wool. They leave deposits that rust

3 Do wipe the surface regularly with a damp clean cloth

3 Do use a mild detergent or soap to clean the surface on a regular basis

3 Do replace mild detergents with a mild non scratching cream for more stubborn spots

3 Do rinse off any detergents or soap with warm clean water & dry with a towel

Access Hardware Architectural Catalogue

Documents

Transcript of Access Hardware Architectural Catalogue