Handles, snap latches and accessories for casement opening · 870.802W Stiffening snap in white...

Handles, snap latches and accessories for casement opening

001

• ARIANNA Page 2

• MANON Page 4-9

• APPLICA 1

• APPLICADUE Page 11

• TURANDOT Page 14

• DUO Page 17-17

• TENUTA Page 26

• VENTILATION SASH Page 41

865.1-865.2

865.801

code description finishes pcs.865.1 (patented) Handle for casement in zamak, dist. between centres 84.5-98

mm, 2 TORX® (T15) cap screws M5x13 in stainless steel. PVD X, PVD H finishes packaging 5 pcs.

1013, 1015, 7035, 7035M, 8017, 8019, 9001, 9005, 9010, B.MA,

B.SA, BL10, BR5, BR801, GR217, GREY, PVD H, PVD X, SILV

20

865.2 (patented) Handle for casement in zamak, dist. between centres 92-104 mm, 2 TORX® (T15) cap screws M5x13 in stainless steel. PVD X, PVD H finishes packaging 5 pcs.

1013, 1015, 8017, 8019, 9001, 9005, 9010, B.SA, BL10, BR5,

BR801, GR217, GR51, GREY, PVD H, PVD X, SILV

20

865.801 Handle reinforcement plate in black galvanized zamak, 1 countersunk head screw M5X18 in stainless steel.

200

Handles and accessories for casement opening

002 Arianna32 21 63.5

1215

74129

174

98 92 10484.5

865.1-865.2

7,8

M5

Ch.3

7,5

9,9 142,6

1,5

2,5

3

18,5

4,63

865.801

865.753-865.754

code description finishes pcs.865.753 (patented) Handle for casement opening in zamak, with safety cylinder (same

keys), dist. between centres 84.5-98 mm, 2 TORX® (T15) cap screws M5x13 in stainless steel. PVD X, PVD H finishes packaging 5 pcs.

1013, 1015, 8017, 8019, 9001, 9005, 9010, B.SA, BL10, BR5,

BR801, GR217, GREY, SILV

10

865.754 (patented) Handle for casement opening in zamak, with safety cylinder (same keys), dist. between centres 92-104 mm, 2 TORX® (T15) cap screws M5x13 in stainless steel. PVD X, PVD H finishes packaging 5 pcs.

1013, 1015, 8017, 8019, 9001, 9005, 9010, B.SA, BL10, BR5, BR801, GR217, GREY, PVD H,

PVD X, SILV

10

866.3/7 Handle with handle in zamak, distance between centres of 43 mm, 7 mm square spindle with a projecting part of 24.5 mm and 2 cap screws M5x35 in galvanized steel.

1013, 8019, 9005, 9010, B.MA, BL10, BR5, C, GR217, PVD H,

PVD X, SILV

5

866.4/7 Handle with handle in zamak, distance between centres of 43 mm, 7 mm square spindle with a projecting part of 52 mm and 2 cap screws M5x60 in galvanized steel.

1013, 8019, 9005, 9010, B.SA, BL10, BR5, C, GR217, PVD H,

PVD X, SILV

5


003Arianna

866.3/7-866.4/7

32 21 63.5

1215

74129

174

98 92 10484.5

865.753-865.754

124

866.3/7

124

Ø1030

1.5

21.5

43 60

02

7

866.4/7

870.7-870.8

code description finishes pcs.870.7 (patented) Handle for casement in die-cast metal, dist. between centres

84.5-98 mm, 2 TORX® (T15) cap screws M5x13 in stainless steel.1013, 1015, 1035, 1247, 6002,

6005, 7016, 7032, 7035, 8017, 8019, 9001, 9005, 9010, 9016,

905, 910, B.MA, B.SA, BL10, BR5, BR801, BW21, C, GR217,

GR606, GREY, RD501, SILV, SLV, VRD27

20

870.1 Like 870.7 but only PVD X, PVD H and OTT finishes. OTT, PVD H, PVD X 20

870.8 (patented) Handle for casement in die-cast metal, dist. between centres 92-104 mm, 2 TORX® (T15) cap screws M5x13 in stainless steel.

1013, 1015, 3003, 6002, 6005, 7032, 7035, 7047, 8017, 8019, 9001, 9005, 9010, 9016, 905, 910, B.MA, B.SA, BL10, BR5,

BR801, BW21, C, GR217, GR50, GR51, GR606, RD501, SILV, SLV

20



004 Manon

3 2.7 2

5.5

Ø 5.5

5

Ø 5

21

62.4

15.2 12

176.

512

9

84.5

98

3467

84.5

76 7698

870.7-870.1

3

21

62.4

15.2 12

176.

512

9

92 104

3467

Ø 5.5

86 80104

92

Ø 5.5

5.57.2

0.65 1.25

870.8-870.2

870.779-870.780

code description finishes pcs.870.779 (patented) Handle for casement in die-cast metal, with safety cylinder

(same keys), dist. between centres 84.5-98 mm, 2 TORX® (T15) cap screws M5x13 in stainless steel.

1013, 1015, 1035, 6002, 6005, 7016, 7032, 7035, 8019, 9001,

9005, 9010, 9016, 905, 910, B.SA, BL10, BR5, BW21, C,

GR217, GREY, SILV, SLV

10

870.753 Like 870.779 but only OTT finishes. OTT 10

870.780 (patented) Handle for casement in die-cast metal, with safety cylinder (same keys), dist. between centres 92-104 mm, 2 TORX® (T15) cap screws M5x13 in stainless steel.

1013, 1015, 6002, 7032, 7035, 8017, 8019, 9001, 9005, 9010,

9016, 905, 910, B.MA, B.SA, BL10, BR5, BR801, BW21, C,

GR217, SILV, SLV

10



005Manon

3

21

62.4

15.2 12

176.

512

9

84.5

98

3467

2.7 2

5.5

Ø 5.5

5

Ø 5

84.5

76 7698

870.779-870.753

3

21

62.4

15.2 12

176.

512

9

92 104

3467

Ø 5.5

86 80104

92

Ø 5.5

5.57.2

0.65 1.25

870.780-870.754

870.755-870.756

1243.599

code description finishes pcs.870.755 (patented) Handle for casement in die-cast metal, without grip handle (grip

handle art.1243.599), dist. between centres 84.5-98 mm, 2 TORX® (T15) cap screws M5x13 in stainless steel.

1013, 1015, 7016, 7047, 8019, 9001, 9005, 9010, B.SA, BL10,

BW21, GR217, SILV

10

870.756 (patented) Handle for casement in die-cast metal, without grip handle (grip handle art.1243.599), dist. between centres 92-104 mm, 2 TORX® (T15) cap screws M5x13 in stainless steel (PVD X finish packaging 5 pcs.).

1013, 7035, 8019, 9001, 9005, 9010, B.SA, BL10, BR5, GR217,

PVD H, PVD X, SILV

10

1243.599 Aluminium loose grip handle for art. 870.755/.756-872.752-873.755/.756. 1013, 1015, 7032, 7035, 9005, 9010, B.SA, C, F, NE, SILV

1


006 Manon

870.755 - 870.756

1243.599

870.803

code description finishes pcs.870.705 Black nylon device replacing leaf handles during the window/door

transportation..74 20

870.802W Stiffening snap in white galvanized zamak for Eurogrooves profiles and NC International.

200

870.803 Stiffening snap in die-cast metal for profiles “R 40/50 and NEW TEC”. 200

870.705870.802W


007

870.705

870.802W 870.803

code description finishes pcs.870.850 Black nylon spacer (70 mm radius) for MANON handle. Suitable to “NC 40 N

rounded overlapped” profiles and similars.50

870.851 Black nylon spacer (115 mm radius) for MANON handle. Suitable to “ALL.CO P4 rounded overlapped” profiles and similars.

50

870.400 Pininfarina label for MANON handle. 100

870.850 870.851


008

870.850

870.1/.2/.753/.754/.755/.756873.1/.2/.753/.754/.755/.756873.771/.772/.773/.774

870.851

874.3/7 874.4/7

code description finishes pcs.872 (patented) Handle made of die-cast metal, dist. between centres 130 mm, 2

plates and 2 cap screws M4x12 in black galvanized steel.1013, 1015, 8017, 8019, 9001,

9005, 9010, BL10, BR5, BR801, C, GR217, GR606, RD501, SILV,

WT005

20

874.2/7 (patented) Handle base with extractable grip made of die-cast aluminium and nylon base of the same colour of the handle, distance between centre of 43 mm, 7 mm square spindle, 2 galvanized steel cap screws M5x30 and 1 key for handle removal made of galvanized steel; dimension 10x1 mm (1 piece each box).

1013, 1015, 3003, 8019, 9005, 9010, B.SA, BL10, BR5, C, GREY, PVD H, PVD X, SILV

5

874.3/7 (patented) Handle with handle in die-cast metal, base and cap in zamak, distance between centres of 43 mm, 7 mm square spindle with a projecting part of 24.5 mm and 2 cap screws M5x35 in galvanized steel.

1013, 1015, 1035, 7032, 7035, 8019, 9001, 9005, 9010, B.MA,

B.SA, BL10, BR5, BR801, C, GR217, GR51, GR606, GREY,

PVD H, PVD X, SILV

5

874.4/7 (patented) Handle with handle in die-cast metal, base and cap in zamak, distance between centres of 43 mm, 7 mm square spindle with projecting part of 52 mm and 2 cap screws M5x60 in galvanized steel.

1013, 1015, 8019, 9001, 9005, 9010, 9016, B.MA, B.SA, BL10, BR5, BR801, C, GR217, GREY,

PVD H, PVD X, SILV

5

872874.2/7


009Manon

872

7

874.2/7 874.3/7

874.4/7

876 876.751

code description finishes pcs.874.805 Protection cap made of red nylon for art. 874.2/.21. 100

874.598 Key for handle removal of art. 874.2/7 made of galvanized steel, dimensions 10x1 mm.

50

876 (patented) Handle in die-cast metal for external and internal openings, dist. between centres 104-108 mm, 2 plates, 2 cap screws M4x14, 2 cap screws Ø 3.9x25 and 2 galvanized steel nuts M4 (PVD H, PVD X finishes packaging 5 pcs.).

1013, 1015, 6005, 7032, 8017, 8019, 9001, 9005, 9010, B.MA,

B.SA, BL10, BR5, BR801, C, GR217, GR606, PVD H, PVD X,

RD501, SILV

20

876.751 (patented) Handle in die-cast metal for external and internal openings, with safety cylinder (same keys), dist. between centres 104-108 mm, 2 subscrew plates, 2 cap screws M4x14, 2 cap screws Ø 3.9x25 and 2 galvanized steel nuts M4.

1013, 1015, 6005, 7032, 8017, 8019, 9001, 9005, 9010, B.SA, BL10, BR5, BR801, C, GR217, GR50, GR51, GR606, PVD H,

PVD X, SILV

10

874.805 874.598


010 Manon

874.805

874.598

876-876.751

877

877.751878

code description finishes pcs.877 (patented) Handle to apply (14 mm travel) for external openings, in die-cast

metal, 4 cap screws 3,9x13 in galvanized steel.1013, 1247, 9005, 9010, B.SA,

BL10, SILV20

877.751 (patented) Handle to apply (14 mm travel) for external openings, in die-cast metal, with safety cylinder (same keys), 4 cap screws 3,9x13 in galvanized steel.

9005, 9010, SILV 10

878 (patented) Handle to apply (14 mm travel) for external openings, in die-cast metal, 4 cap screws 3,9x13 in galvanized steel.

1013, 9005, 9010, BL10, GR606, SILV

20


011Applica - Applicadue

877 877.751 878

877.803 877.804 877.805 877.806

code description finishes pcs.877.801 Kit of vertical rods for windows (max height 1900 mm) for art. 877/.751-878, in polished steel

with pre-assembled terminal rod, 2 through-guides, 2 keepers, 2 spacers of 1 mm, 2 spacers of 1,5 mm and 2 spacers of 2 mm in nylon, 10 cap screws 3,9x13 in galvanized steel.

9005, 9010, B.SA, BL10,

GR606, SILV

10

877.802 Third closing point for flat profiles, 1 locking piece in die-cast zamack, 1 through-guide, 1 keeper, 4 cap screws 3,9x13 in galvanized steel.

20

877.803 Third closing point for stepped profiles, 1 locking piece in zamak, 1 through-guide, 1 keeper, 1 spacer of 1 mm, 1 spacer of 1,5 mm and 1 spacer of 2 mm in nylon, 4 cap screws 3,9x13 in galvanized steel.

20

877.804 Sash stop device in nylon. 100

877.805 Kit of vertical rods for doors (max height 2500 mm) for art. 877/.751-878, in polished steel with pre-assembled terminal rod closing point, 2 through-guides, 2 keepers, 2 spacers of 1 mm, 2 spacers of 1,5 mm and 2 spacers of 2 mm in nylon, 10 cap screws 3,9x13 in galvanized steel.

1013, 9005, 9010, B.SA,

BL10, GR606, SILV

10

877.806 Kit of vertical rods for doors (max height 3100 mm) for art. 877/.751-878, in black polished steel with pre-assembled terminal rod closing point, 2 through-guides, 2 keepers, 2 spacers of 1 mm, 2 spacers of 1,5 mm and 2 spacers of 2 mm in nylon, 10 countersunk head screws 3,9x13 in galvanized steel.

9005, 9010, BL10, SILV

10

877.801 877.802


012

877.801 877.802 877.803

877.804-877.805-877.806

code description finishes pcs.877.807 Rod-guide in black nylon. .74, .78 40

877.808 Safety rod-guide in zamak. 9005, 9010, SILV 40

877.807877.808


013

877.807 877.808

879

879.2 879.751

code description finishes pcs.879 (patented) Handle in die-cast metal for shutters, for external and internal

openings, distance between centres 104-108 mm, 2 subscrew plates, 2 socket head cap screws M4x10 and 2 M4 nuts in galvanized steel (PVD X and PVD H: packaging 5 pcs.; C: packaging 50 pcs.).

1013, 1015, 3003, 6005, 8017, 8019, 9001, 9005, 9010, 9016,

BL10, BR5, BR801, BW21, C, GR217, GR50, GR51, GR606,

PVD H, PVD X, RD501, SILV

20

879.2 (patented) Die-cast metal handle for shutters, for external and internal openings, centre distances 104-108, 2 subscrew plates, 2 socket head cap screws M4x10 and 2 nuts of galvanized steel (PVD X and PVD H: packaging 5 pcs.).

1013, 1015, 1247, 6005, 7032, 7035, 7047, 8017, 8019, 9001,

9005, 9010, 9016, B.MA, B.SA, BL10, BL25, BR5, BR801,

GR217, GR50, GR51, GR606, PVD H, PVD X, RD501, SILV,

VRD27

20

879.751 (patented) Die-cast metal handle for shutters, for external and internal openings, with safety lock, centre distances 104-108, 2 subscrew plates, 2 socket head cap screws M4x10 and 2 nuts M4 made of galvanized steel, 1 key (PVD X and PVD H: packaging 5 pcs.).

1013, 1015, 6005, 8017, 8019, 9001, 9005, 9010, BL10, BR5,

BR801, GR217, GR50, GR51, GR606, GREY, PVD H, PVD X,

RD501, SILV

10


014 Turandot

128

83.5

108

104

14.4

879

171 12

6.5

6212

27 58

108

104

15

Machining for connection

Machining for internal mechanisms

879.2 - 879.751

879.3

879.20879.950

code description finishes pcs.879.3 (patented) Die-cast metal handle, for shutters, for external and internal

openings, flat handle, centre distances 104-108, 2 subscrew plates, 2 socket head cap screws M4x10 and 2 nuts M4 of galvanized steel (PVD X and PVD H: packaging 5 pcs.).

1013, 1015, 3003, 6005, 8017, 8019, 9001, 9005, 9010, 9016, BL10, BR5, BR801, C, GR217, GR50, GR51, GR606, PVD H,

PVD X, RD501, SILV

20

879.20 (patented) Handle in die-cast metal for shutters, distance between centres 104-108, 1 fixing device in black galvanized zamak, 4 countersunk head screws Ø 3,9x19 in stainless steel, 2 special countersunk head screws M5 X18 in stainless steel.

1013, 8019, 9005, 9010, 9016, BL10, BR5, BR801, GR217, PVD

H, PVD X, SILV, VRD27

20

879.950 2.5 mm spherical hexagonal end screwdriver, for TURANDOT handles assembly, art. 879.2/.20/.3/.751.

1


015Turandot

108

171

6212

27 39

104

15

879.3

58 52.5 27

2812

8

171 10

810

4 42

879.20

916.802 916.803

code description finishes pcs.916.800 Internal mechanism for art. 876/.751-879-915/.1 in aluminium and nylon. 20

916.801 Kit for external rod profiles for art .876/.751-915/.1 including 2 blocks, 1 nylon spacer and 2 pins in galvanized steel.

20

916.802 Kit for external rods profiles for art. 876/.751-915/.1 including 2 nylon blocks and 2 pins in galvanized steel.

20

916.803 kit for external rods profiles for art. 876/.751-915/.1 including 2 nylon blocks and 2 pins in galvanized steel.

20


20

916.805 Kit for external rods profiles for art. 876/.751-915/.1 including 2 nylon blocks and 2 pins in galvanized steel.

20


20

916.800 916.801


016

916.804/.805/.807

916.800 916.801 916.802 916.803

916.804 916.805 916.807

1202/7 1202L/7

1204/7

code description finishes pcs.916.897 Kit for art. 915/.1 including 2 cap screws M4x18 and 4 plates in galvanized

steel.40

1201/7 Bi-directional movement mechanism for casement opening, with 8 mm backset, in black galvanized zamak, 7 mm square hole, nylon bushings Ø 6-Ø 8 mm.

20

1202/7 RH bi-directional movement with 22 mm backset made of white galvanized zamak, 7 mm square hole, 2 nylon bushings Ø 6-Ø 8 mm.

20

1202L/7 LH Bi-directional movement with 22 mm backset made of white galvanized zamak, 7 mm square hole, 2 nylon bushings Ø 6-Ø 8 mm.

20

1204/7 Bi-directional movement mechanism with 16 mm backset for casement opening in black galvanized zamak, 7 mm square hole, nylon bushings Ø 6-Ø 8 mm.

10

1200.801 2 mm nylon spacer (to combine with art. 1200/1201 for application on R 40-NEW TEC profiles).

40

916.8971201/7


017Duo

1200.801

1201/7

22.2

19

36

20

1895

18

131

21.5

21.5

14.4

1202/7 - 1202L/7

1204/7

code description finishes pcs.1211/7 Bi-directional movement mechanism for casement opening, with 14,5 mm

backset, in white galvanized zamak, 7 mm square hole, nylon bushings Ø 6-Ø 8 mm.

20

1211.801 Adapter for special rod in black nylon. 40

1211/7 1211.801


018 Duo

21,5

21,5

21,5

21,5

12,8

61

9

9,4

Ø12

15

168,

5

1515

5

20

14,5

20,5

1211/7

62

56

Ø 6

18

2,7

1046

19,1

5

1211.801

1243.721 1243.721W

1243.790

code description finishes pcs.1213/7R RH bi-directional movement made of white galvanized zamak, 7 mm square

hole, 2 nylon bushings Ø 6-Ø 8 mm.20

1213/7L LH bi-directional movement made of white galvanized zamak, 7 mm square hole, 2 nylon bushings Ø 6-Ø 8 mm.

20

1243.721 Adjustable keeper in black galvanized zamak, 2 pre-assembled grub screws M5x12 and 1 countersunk head screw M4x8 in stainless steel 304.

40

1243.721W Adjustable keeper in white galvanized zamak, 2 pre-assembled grub screws M5x12 and 1 countersunk head screw M4x8 in stainless steel 304.

40

1243.790 Upper corner drive in black galvanized zamak. 10

1213/7R1213/7L


019Duo

755

,813

8,8

153

20,427,4

Ø7,

7

Ø6

26,8

1213/7R - 1213/7L

1243.721-1243.721W

1404 1405

code description finishes pcs.1400 Nylon keeper, 2 galvanized steel countersunk head screws Ø 4,2x16. 100

1402 Nylon keeper, 2 galvanized steel cap screws Ø 3.5x9.5. 100

1404 Keeper in black galvanized zamak, wing nut and 1 pre-assembled countersunk head screw M5x10 in stainless steel 304.

100

1405 Keeper in black galvanized zamak, 1 pre-assembled grub screw M5x6 in galvanized steel.

100

1406 Keeper in black galvanized zamak, 2 pre-assembled grub screws M5x10 in galvanized steel.

100

1406.1 Keeper in black galvanized zamak, 2 pre-assembled grub screws M5x10 in galvanized steel.

100

1400 1402


020

1406/.1

1400 1402 1404 1405

1406

1406.1

1410.2 1410.701

1410.3

code description finishes pcs.1408 Floor Keeper in stainless steel 430. 100

1410.1 Nylon support, 1 pre-assembled grub screw M5x10 in galvanized steel. 100

1410.2 Zamak support, 1 pre-assembled grub screw M5x6 in galvanized steel. 100

1410.701 Support in zamak, 1 pre-assembled grub screw M5x6 in galvanized steel. 100

1410.3 Nylon support, 1 pre-assembled grub screw M5x10 in galvanized steel. 100

14081410.1


021

1408

1410.1 1410.2 1410.701

1410.3

1410.703 1410.705

code description finishes pcs.1410.50 Kit of 1 black nylon support and 1 black nylon support with 1 pre-assembled

grub screw M5x16 in stainless steel.100

1410.51 Kit of 1 black nylon support and 1 black nylon support with 1 pre-assembled grub screw M5x16 in stainless steel.

100

1410.703 Black nylon support, 1 pre-assembled grub screw M5x16 in stainless steel. 100

1410.705 Black nylon support. 100

1410.50 1410.51


022

5

12,56,5

30

40 2,3

21

20

22

3,3

4,7 14,6

2,8

1410.50

30

7,510

,5

20,8

4,5

2,7

21

30

4012,5 5

6,5

2,3

1410.51

40

30

6.5

5

4 21

11

12.5

3

1410.703

3

22

7,5

30

22

15,1

10,5

38

1410.705

1414.8011415 1415.1 1415.2

code description finishes pcs.1414 Adjustable keeper in black galvanized zamak, 1 pre-assembled grub screw

M5x12 in stainless steel, 2 nylon cups.200

1414W Adjustable keeper in white galvanized zamak, 1 pre-assembled grub screw M5x12 in stainless steel, 2 nylon cups.

200

1414.1W Double adjustable keeper in white galvanized zamak, 2 pre-assembled grub screws M5x12 in stainless steel, 3 black nylon spacers (0.6 - 1 - 1.5 mm).

200

1414.801 Black nylon spacers (0,6-1-1,5 mm) for double adjustable keeper art. 1414.1W. 100

1415 Double keeper in black galvanized zamak, 2 pre-assembled grub screws M5x10 in galvanized steel.

100

1415.1 Double keeper in black galvanized zamak, 2 pre-assembled grub screws M5x10 in galvanized steel.

100

1415.2 Double keeper in black galvanized zamak, 2 pre-assembled grub screws M5x10 in galvanized steel.

100

1415.3 Double keeper in black galvanized zamak, 1 pre-assembled grub screw M5x8 in galvanized steel.

100

1414 1414W

1414.1W


023

1415.3

1414-1414W

13

0.6 1

1,5

48.5

20.6

1414.1W

0.6 1

1,5

1414.801

1415

1415.1 1415.2 1415.3

1425 1425.1

code description finishes pcs.1416 Double keeper in black galvanized zamak, 1 pre-assembled grub screw M5x6 in galvanized steel. 100

1416.1 Double keeper in black galvanized zamak, 1 pre-assembled grub screw M5x6 in galvanized steel. 100



1416.5 Double keeper in black galvanized zamak, 1 pre-assembled grub screw M5x10 in galvanized steel.

100

1416.5W Double keeper in white galvanized zamak, 1 pre-assembled grub screw M5x16 in galvanized steel.

100

1425 Keeper for third closing in black galvanized zamak, 1 pre-assembled grub screw M5x10 in galvanized steel.

100

1425.1 Keeper for third closing point in black galvanized zamak, 1 pre-assembled grub screw M5x8 in galvanized steel.

100

1441 Nylon rod-guide bushing. 1000

1416/.1/.3/.7 1416.5 1416.5W


024

1441

1416 1416.1 1416.3

1416.7

1416.5-1416.5W 1425 1425.1 1441

1465

code description finishes pcs.1463 Ventilation locking piece available for 3rd locking point too, in black nylon (to

combine with art. 1416.5/1416.5W).100

1464 Intermediate locking piece in black galvanized zamak. 100

1465 Terminal locking piece in black galvanized zamak, 1 polyurethane cap and 1 nylon bushing Ø 6-Ø 8.

100

14631464


025

1463

1464

1465

code description finishes pcs.1466 Terminal or intermediate locking piece in black galvanized zamak, 1

polyurethane cap and 2 nylon bushings Ø 6-Ø 8.100

1466.1 Terminal or intermediate locking piece in black galvanized zamak, 1 polyurethane cap and 2 nylon bushings Ø 6-Ø 8.

100

1471 Lateral closing point in zamak and nylon, 1 galvanized steel pin, 2 galvanized steel cap screws Ø 4.2x13.

20

1471.1 Lateral closing in zamak and nylon, 1 galvanized steel pin, 2 galvanized steel cap screws Ø 4.2x13.

20

1466 1466.1

1471 1471.1


026 Tenuta

1466

1466.1

1471-1471.1

1475.7

code description finishes pcs.1475.5 Internal mechanism for art. 876/.751, 879/.2/.3/.751, 915/.1 made of

aluminium and nylon, 2 nylon spacers.20

1475.6 Internal mechanism for art. 876/.751, 879/.2/.3/.751, 915/.1 made of aluminium and nylon, 2 nylon spacers.

20

1475.7 Internal mechanism for art. 876/.751, 879/.2/.3/.751, 915/.1 made of aluminium and nylon, 2 galvanized steel hex. socket head cap screws M4x16.

20

1475.51475.6


027

1475.5

1475.6

1475.7

1475.800 1475.801

code description finishes pcs.1475.8 Internal mechanism for art. 876/.751, 879/.2/.3/.751, 915/.1 made of aluminium

and nylon, 2 galvanized steel socket head cap screws M4x16, 2 nylon spacers.

20

1475.9 Internal mechanism for art. 876/.751, 879/.2/.3/.751, 915/.1 made of aluminium and nylon.

20

1475.800 Galvanized steel pin. 40

1475.801 Galvanized steel pin. 40

1475.8 1475.9


028

1475.8

1475.9

1475.800-1475.801

1481 1481.1

1481.8

code description finishes pcs.1480 Nylon universal block for art. 909.1. 80

1480.2 Nylon traditional block for art. 909.1. 80

1481 Connection piece in black galvanized zamak, 1 polyurethane cap, 1 nylon bushing Ø 6-Ø 8.

200

1481.1 Connection piece in black galvanized zamak, 1 polyurethane cap, 1 nylon bushing Ø 6-Ø 8.

200

1481.8 Connection piece in white galvanized zamak, 1 clip and 1 nylon bushing Ø 6-Ø 8. 200

14801480.2


029

1480 1480.2 1481-1481.1

Ø7

9 37

18,3

18

5,8

10,6

12,6

6

192,

71481.8

code description finishes pcs.1483 Connection piece in black galvanized zamak, 1 polyurethane cap, 1 nylon

bushing Ø 6-Ø 8.200


200


200

1483.6 Nylon connection piece. 200

1483 1483.1 1483.2

1483.6


030

1483 1483.1 1483.2

1483.6

1484.8

code description finishes pcs.1484.4 Nylon connection piece. 200

1484.5 Nylon connection piece. 200

1484.7 Couple of connection pieces with ventilation switch and 2 bushings Ø 6-Ø 8 in black nylon. To be used with art. 1416.5W.

100

1484.8 Couple of connection pieces and 2 bushings Ø 6-Ø 8 in black nylon. 100

1484.4 1484.5

1484.7


031

1484.4

1484.5

1484.7

1484.8

1609-1609.1

code description finishes pcs.1609 Snap-latch with reduced base and handle made of aluminum and nylon with 7

mm squared spindle and 2 zinc-plated steel countersunk head screw M5x35.9005, 9010, C 5

1609.1 Snap-latch with reduced base and handle made of aluminum and nylon with 7 mm square spindle (62,5mm projecting part) and 2 zinc-plated steel countersunk head screw M5x70.

9005, 9010, C 5

1610/7 Handle with grip in aluminium, 7 mm square spindle with a projecting part of 38 mm and 2 countersunk head screws M5x45 in galvanized steel.

9005, 9016, F, U 25


032

1610/7

1609 1609.1

2911

59.5

Ø9.

8

131

38

M5

45

43

65

7

1610/7

1485-1485.3

1485.1 1485.2

1485.8

code description finishes pcs.1485 Black nylon terminal rod closing piece, top end in galvanized steel Ø 8 with

adjustable nylon bushing.100

1485.3 Black nylon terminal rod closing piece, top end in galvanized steel Ø 8 with adjustable nylon bushing.

100

1485.1 Black nylon terminal rod closing piece, top end in galvanized steel Ø 8 with adjustable nylon bushing, with rod connection piece.

100

1485.2 Black nylon terminal rod closing piece, top end in galvanized steel Ø 8 with adjustable nylon bushing, with rod connection piece.

100

1485.8 Black nylon terminal rod closing piece, top end in galvanized steel Ø 8 with adjustable nylon bushing, 1 nylon bushing Ø 6-Ø 8.

100


033

1485-1485.3

1485.1-1485.2

Ø7,

9

19,18,410,3

97 7

31

8

20

6

18

73

97

1485.8

1486

1486.1 1486.2

code description finishes pcs.1486 Terminal rod closing piece in black galvanized zamak, 2 polyurethane caps

and 1 nylon bushing Ø 6-Ø 8.100

1486.1 Terminal rod closing piece in black galvanized zamak, 2 polyurethane caps and 1 nylon bushing Ø 6-Ø 8.

100

1486.2 (patented) Terminal rod closing piece in black galvanized zamak, 2 polyurethane caps and 1 nylon bushing Ø 6-Ø 8.

100


034

1486 1486.1-1486.2

1486.6

1486.81487

code description finishes pcs.1486.6 (patented) Terminal rod closing piece in black galvanized zamak, 2

polyurethane caps.100

1486.8 Terminal rod closing piece in white galvanized zamak, 1 clip and 1 nylon bushing Ø 6-Ø 8, 1 polyurethane cap in red nylon.

100

1487 Adjustable terminal rod closing piece in black galvanized zamak and stainless steel 430, 1 polyurethane cap and 1 nylon bushing Ø 6-Ø 8.

100


035

1486.6

20

99 93

6,6

Ø7,

96

10

19,1

1486.8

1487

1487.1

1487.8

code description finishes pcs.1487.1 Adjustable terminal rod closing piece in black galvanized zamak and stainless

steel 430, 1 polyurethane cap and 1 nylon bushing Ø 6-Ø 8.100

1487.8 Adjustable terminal rod closing piece in white galvanized zamak, pre-assembled black nylon clips.

100


036

1487.1

693

5

82,7

9,6

13

4,4

1487.8

3100.8213200.401R 3200.401L

code description finishes pcs.1486.702 Nylon bushing Ø 6-Ø 8 mm. 2000

1486.701 Red nylon cap. 200

3100.821 Locking piece in black galvanized zamak, 1 cup in low density polyethylene (LDPE), 1 bushing Ø 6-Ø 8 mm.

40

3200.401R RH locking piece kit in white galvanized zamak and black nylon, 1 grub-screw TORX® T15 M6x8.8 in stainless steel pre-assembled.

10

3200.401L LH locking piece kit in white galvanized zamak and black nylon, 1 grub-screw TORX® T15 M6x8.8 in stainless steel pre-assembled.

10

3200.421R RH corner drive and support kit, including: corner drive in white galvanized zamak, blades in stainless steel, 1 clip in black nylon, 1 grub-screw TORX® T10 PCOP M5x8 and 1 grub-screw TORX® T15 M6x8.8 in stainless steel pre-assembled, support in black nylon and 1 grub-screw TORX® T10 PC M5x16 in stainless steel pre-assembled.

10

3200.421L LH corner drive and support kit, including: corner drive in white galvanized zamak, blades in stainless steel, 1 clip in black nylon, 1 grub-screw TORX® T10 PCOP M5x8 and 1 grub-screw TORX® T15 M6x8.8 in stainless steel pre-assembled, support in black nylon and 1 grub-screw TORX® T10 PC M5x16 in stainless steel pre-assembled.

10

1486.7021486.701


037

3200.421R - 3200.421L

1486.702

2,7

100

17,1

10,8

10

Ø6,2

4,5

14,6

3200.401R - 3200.401L

12,5

5

6,5

18,5

27 21

2,3

49

109

Ø6

20

3200.421R - 3200.421L

code description finishes pcs.3200.600R (patented) Right lateral closing Kit including: handle connection piece, 2

locking pieces (RH+LH) and 2 adjustable Keepers in white galvanized zamak, premounted screws made of 304 and 430 stainless steel.

40

3200.600L (patented) Left lateral closing Kit including: handle connection piece, 2 locking pieces (RH+LH) and 2 adjustable keepers in white galvanized zamak, premounted screws made of 304 and 430 stainless steel.

40

3200.600R 3200.600L


038

15,113,5

418

,3

45

79,8

12

5

19,1

10,5

36

3200.600R-3200.600L

code description finishes pcs.3200.605R (patented) Right terminal locking piece in white galvanized zamak, adjustable

keeper, premounted screws made of 304 and 430 stainless steel.40

3200.605L (patented) Left terminal locking piece in white galvanized zamak, adjustable keeper, premounted screws made of 304 and 430 stainless steel.

40

3200.610 Kit of connection and terminal pieces in white galvanized zamak, pre-assembled grub-screws in stainless steel, 2 frictioning caps and 4 nylon clips.

20

3200.605R 3200.605L

3200.610


039

12

5

36

79,8

19,1

10,5

3200.605R-3200.605L

15,2

9,8

1,5

56

37

2,712,6

4,5

18,3

108

6,6

10

4,5

2,7

14,6

11,5

3200.610

3200.612

3200.615R 3200.615L

code description finishes pcs.3200.612 Upper and lower corner device kit in white zamac and nylon, stainless steel

304 and 430 screws, pre-assembled.5

3200.615R Telescopic rod and RH closing poit in white galvanized zamak and stainless steel 304 screws, pre-assembled.

5

3200.615L Telescopic rod and RH closing point in white galvanized zamak and stainless steel 304 screws, pre-assembled.

5

3200.803 Night ventilation kit including: pre-assembled keeper and pinion kit in white galvanized zamak, pre-assembled screws in stainless steel 304 and 430.

40


040

149

20

79,5

12,5

21

27 21

5

17,5

58

36

3200.612

277,9

2,711

,5

100

17,2

18,1

17,1

18,1

2,7

11,5

3200.615R-3200.615L

484

10

17,2

5

17,5

12

48

3200.803

3200.650R-3200.650L

code description finishes pcs.3200.650R Closing kit for limited right hand casement in white galvanized zamak, nylon

and stainless steel, pre-assembled screws in stainless steel.5

3200.650L Closing kit for limited left hand casement in white galvanized zamak, nylon and stainless steel, pre-assembled screws in stainless steel.

5


041Ventilation Sash

16.5

1.6

13.5

1.5

2.5 2.5

5

3.5

5

16.5

2

12.5

2

1.5

3

4.5

15 121.

5

1.5

1.5

5

3.5

14.3

2.3

10

2

1.5

33

5

3.5

1814

5

4.5

15202

22

22

21+0,5

0

min16.5

3200.650R-3200.650L

3200.651R-3200.651L

code description finishes pcs.3200.651R Vertical closing kit for limited right hand casement in white galvanized zamak,

nylon and stainless steel, pre-assembled TORX® screws in stainless steel.5

3200.651L Vertical closing kit for limited left hand casement in white galvanized zamak, nylon and stainless steel, pre-assembled TORX® screws in stainless steel.

5


042 Ventilation Sash

30

5

8

5

665

181

16

20

2,3

2,3

12,5

1812

,5

6

49

5

5,548

36

138,1

55,812

5

5,5

45

169

17,5

17,5

5,4

18,3

2,3

17,2

1017

,2

2,3

3200.651R - 3200.651L

3200.652R-3200.652L

code description finishes pcs.3200.652R RH supplementary arm in stainless steel, white galvanized zamak and black

nylon, stainless steel pins, 3 TORX® M5X10 grub screws and 1 TORX® M6x8.8 grub-screw in stainless steel, pre-assembled.

5

3200.652L LH supplementary arm in stainless steel, white galvanized zamak and black nylon, stainless steel pins, 3 TORX® M5X10 grub screws and 1 TORX® M6x8.8 grub-screw in stainless steel, pre-assembled.

5


043

138,1

4

20,9

1012

,55

6 12181

30

12,5

8

5

2,3

3200.652R - 3200.652L

3205/25 ÷ 3205/300

code description finishes pcs.3205/25 (patented) 250 mm transmission rod in silver pre-oxidized extruded

aluminum. 100

3205/40 Like 3205/25 but of 400 mm. 100

3205/60 Like 3205/25 but of 600 mm. 100

3205/80 Like 3205/25 but of 800 mm. 100

3205/100 Like 3205/25 but of 1000 mm. 100

3205/120 Like 3205/25 but of 1200 mm. 100

3205/140 Like 3205/25 but of 1400 mm. 100

3205/160 Like 3205/25 but of 1600 mm. 50

3205/180 Like 3205/25 but of 1800 mm. 50

3205/200 Like 3205/25 but of 2000 mm. 50

3205/220 Like 3205/25 but of 2200 mm. 50

3205/300 Like 3205/25 but of 3000 mm. 50


044

Description mm Art. Pcs./pack.

250 3205/25 100400 3205/40 100600 3205/60 100800 3205/80 1001000 3205/100 1001200 3205/120 1001400 3205/140 1001600 3205/160 501800 3205/180 502000 3205/200 5022003000

3205/2203205/300

5050

Transmission rod

3205/25 ÷ 3205/300

Handles, snap latches and accessories for casement opening · 870.802W Stiffening snap in white...

Documents

Transcript of Handles, snap latches and accessories for casement opening · 870.802W Stiffening snap in white...