Frquency selective surfaces
-
Upload
bhaskara-naik-s -
Category
Education
-
view
3.683 -
download
20
Transcript of Frquency selective surfaces
![Page 1: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/1.jpg)
A Seminar On Frequency Selective Surfaces
And Its Applications(Dichroic)
Presented By,
Bhaskara.Naik.S(11EC63R01)
Mtech(RF and Microwave)
E&EC Dept.
![Page 2: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/2.jpg)
OutlineIntroductionFSS-General Mechanism.Elements of FSS Design
Element GeometriesElement Dimensions
Types of FSS1.The center connected or N-poles 2.The loop types3.Solid interiors or plate types.4.Combinations of 1,2,3
Applications of FSS.DrawbacksConclusionsReferences
![Page 3: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/3.jpg)
Introduction
• A Frequency Selective Surface (FSS)- is an any planar surface designed as a ‘filter’ for microwave frequency
waves.• Evolution from Radar Cross Section (RCS)
Angular/frequency dependence
Band Pass/Band Stop behavior.• FSS Characteristics
Typically narrow band Periodic, typically in two dimensions Element type: dielectric or metallic/circuit Depends on Element shape, size. Depends on Element spacing and orientation
What is an FSS?
![Page 4: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/4.jpg)
• Once exposed to the electromagnetic radiation, a FSS acts like a spatial filter; some frequency bands are transmitted and some are reflected.
• Early 1960, FSS structures have been the subject of intensive study for Military Application.
• Marconi and Franklin are believed, [1] to be the early pioneers in this area for their contribution of a parabolic reflectors.
![Page 5: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/5.jpg)
Nippon designed shied film for windows that can shield the desired frequency.
i.e 2.45Ghz for WLAN or 1.9GHz for
PHS (Personal hand-phone systems).
![Page 6: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/6.jpg)
• FSS-is based on Resonance.
• EM-wave illuminates an array of metallic elements, thus exciting electric current on the elements.
• The amplitude of the generated current depends on the strength of the coupling of energy between the wave and the elements.
• The coupling reaches its highest level at resonant frequency, when the length of elements is a λ/2.
• Hence elements are shaped so that they are resonant near the frequency of operation.
FSS-General Mechanism.
![Page 7: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/7.jpg)
• Current which acts as an EM source which gives a scattered field.
• Each phase front has its on delay. These scattered radiation add up. Which makes transmission of that signal.
• Scattered field+ incident field which results total field in the space surrounding the FSS. By controlling the scattered field, we can able to design required filter response.
• Distribution of the current on the elements determines the frequency behavior of the FSS.
![Page 8: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/8.jpg)
• Resonance characteristics of FSS are depends, On the way the surface is exposed
to the electromagnetic wave. Incidence angle of the wave. Effective aperture size of the FSS
Diffraction gratings. Periodicity of cells. Substrate that supporting the
FSS element Inter element Spacing. Arrangement of Elements.
![Page 9: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/9.jpg)
Elements of FSS DesignElement Geometries:
2 Groups:-
Patch-type elements-capacitive effect.
Aperture-type element-Inductance Effect.
![Page 10: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/10.jpg)
The patch-array produces a capacitive response, Low Pass Filter
Patch-type elements
![Page 11: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/11.jpg)
Array of slots is inductive- High Pass filter
Aperture-type element.
![Page 12: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/12.jpg)
Element Dimensions
• For resonance, length of the element should satisfy the condition λ/2.
• In Square loop total length of the side is λ/2
• Planar array of strip dipoles, produces a frequency frequency response when the length of the dipoles is a multiple of λ/2
![Page 13: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/13.jpg)
Types Of FSS
1.The center connected or N-poles
2.The loop
types
3.Solid interiors or plate types
4.Combinations
FSS (Based on shapes by MONK,[1])– 4 Classes.
1.The center connected or N-poles
2.The loop
types
3.Solid interiors or plate types
4.Combinations
3.Solid interiors or plate types
2.The loop
types
4.Combinations
3.Solid interiors or plate types
1.The center connected or N-poles
2.The loop
types
4.Combinations of 1,2,3
3.Solid interiors or plate types
![Page 14: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/14.jpg)
Class I: Center Connected or N-Pole Elements• Tripole Array
Three concentric, thin monopoles which share a common point (the center).
**(All Results from book by Munk on FSS, [1])
![Page 15: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/15.jpg)
Fig shows the calculated reflectivity for closely spaced tripoles in an infinite array on x / z plane at design frequency 10 GHz.
--Dx and Dz-Array periodicity along X and Z direction
![Page 16: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/16.jpg)
• Jerusalem Cross:Two crossing dipoles which are loaded with
small, orthogonal sections at their ends.
•Jerusalem cross has got better stability than Tripole array
![Page 17: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/17.jpg)
Class II: Loop Type Elements. Four-Legged Element-This element is made up of
two meandered, half-wave dipoles.The operation mechanism of this element can be
explained using the transmission line theory. Toatal goemetry of this element should satisfy λ/2. To Satisfy this l= λ/8.
Four-Legged Element
l
ll
l
ll
ll
![Page 18: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/18.jpg)
• Basic Idea of designing Four-Legged Element.
Overall reactive impedance of the dipoles which has to be zero at the resonance.
At the resonance frequency of the half-wave dipole, shorter dipole behaves as capacitive.[3]
We need to introduce new load ZL(must be inductive)so that the total impedance of the dipole becomes zero.
![Page 19: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/19.jpg)
Shorting of a small piece of transmission line which creates inductance. [3].
Length of the meandered dipole along the two directions, l, must be equal. l= λ/8
I
C. Inductance formed(ZL)
![Page 20: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/20.jpg)
Development of four-legged element
(a) Fig Shows a simple half-wave dipole with impedance Zd which is shortened into a quarter-wave dipole with impedance Zd-jXd
![Page 21: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/21.jpg)
(b) That is loaded with an inductance formed (c) using a short transmission line.
![Page 22: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/22.jpg)
Two such dipoles are placed side by side (d) and finally are connected at the end points (e). [1]
![Page 23: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/23.jpg)
Class III: Plate Type Elements-• Plate type FSS .-2 forms .
1. Array of metallic patches in the shape of a circular disk, square, rectangular, etc.
These are usually used as reflecting arrays.
![Page 24: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/24.jpg)
• 2) Array of slots on a metallic plate in the form of circular, square shape, etc. This type is often transparent.
![Page 25: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/25.jpg)
• Type 1 is highly depends on grating lobe where as type 2 is angle dependent as its patches (holes) dimensions must be the order of λ/2.
• Hence these are not highly used in Filter design.
![Page 26: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/26.jpg)
Class IV: Combination Elements• Combination of these groups, which gives a
new FSS element..
This is the combination of four-legged element and Jerusalem cross
![Page 27: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/27.jpg)
Applications of FSS
RadomesMulti-Frequency ReflectorsBeam Control ArraysFSS as reactive impedance surfaces.FSS are used in design of Artificial
Magnetic Conductors (AMC) and EM Band Gap (EBG) materials etc.
![Page 28: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/28.jpg)
Application of frequency-selective surfaces as radome covers in the aircraft technology for reducing the antenna RCS [1]
RADOME
•RADOME-Operates in 2 modes.1.Trasnaparent mode
2.Reflecting mode
![Page 29: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/29.jpg)
Multi-Frequency Reflectors
• FSS as a sub reflector along with Main dish.
• Reflective at a particular frequency band and transparent at another frequency band.
![Page 30: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/30.jpg)
Drawbacks
• Since resonance depends on length, traditional FSS has got high harmonic content.
• The issue of harmonics not only affects the frequency characteristics of the FSS but also degrades its performance.
• FSS needs large no of cells, which increases the size of the system.
• Since it depends on resonant condition of material, it is difficult to design miniaturized circuit.
![Page 31: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/31.jpg)
Conclusion
• FSS can be used as filter in Microwave frequency Region.
• FSS plays a major role in technical as well as commercial aspects.
• Even though FSS are depends on frequency, research are going on in miniaturizing these circuits.
![Page 32: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/32.jpg)
References
• [1]. D. Rittenhouse, "An optical problem, proposed by Mr. Hopkinson, and solved by Mr. Rittenhouse," Trans. Amer. Phil. SOC., vol. 2, pp. 201-206, 1786.
• [2] T. K. Wu, Frequency-selective surface and grid array," Wiley, New York, 1995.
• [3] J. A. Kong, \Electromagnetic wave theory," Cambridge, MA: EMW Publishing, 2000,pp. 180-274.
![Page 33: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/33.jpg)
[4].Metamaterial-Inspired Frequency-Selective Surfaces by Farhad Bayatpur.
Web sites
• www.ansoft.com/adf_uk/Frequency_Selective_Surfaces.pdf
• http://www.eda.kent.ac.uk/research/theme_detail.aspx?gid=1&tid=21
• http://en.wikipedia.org/wiki/Radome
• http://www.antenna-theory.com
![Page 34: Frquency selective surfaces](https://reader035.fdocuments.us/reader035/viewer/2022081416/55621726d8b42a7d028b5567/html5/thumbnails/34.jpg)