2 – 10 HP Fountains5- Step Quick Install Guide

Thank you for choosing Arbrux! Our products represent great quality at a great price!

We have worked hard to become the benchmark for our industry since 1979. We are excited to show you how easy our products are to install...

Here we go...

Step 1: Install Cable

• Run power cable to exit at bottomcenter of frame. Fasten and protectas necessary.

(Shown with Optional Wheel Kit)

Step 2: Fasten Intake Screen

• Fasten intakescreen on the end of flow sleeve with3 fasteners and washers.

(Shown with Optional Wheel Kit)

Step 3: Launch Fountain

• You are ready to launch yourfountain in the water.

(Shown with Optional Wheel and Light Kit)

Step 4: Run Power Cable

1. Moor fountain with ropes to shore or anchors.

2. Run power cable to shore.

2

1

(Shown with Optional Wheel Kit)

Step 5: Connect the Power

1. 240 Volt Single Phase Control Panel (electrician required)

2. Three Phase Control Panel (electrician required)

2

1

You’re Done... Time to Enjoy the View!

Don’t Forget to Show us your Fountain in Action....

Email your Images tosales@arbrux.com

and your Fountain could be featured on our site!