ANMX300 DRINKING FOUNTAIN - Barbour Product Search fountains-file095501.pdfThe Franke Sissons Wall...
Transcript of ANMX300 DRINKING FOUNTAIN - Barbour Product Search fountains-file095501.pdfThe Franke Sissons Wall...
DRINKING FOUNTAIN:ANMX300ANMX300 | 2000071850ARTICLE GROUP : ANMX300 | ARTICLE FAMILY : Drinking fountains unchilled | PRODUCT GROUP : Water dispensers |MODELRANGE : ANIMA
Drinking water fountain for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, flat pressed top,rectangular shape, rounded edges, without overflow, 19mm waste, drainage centric, incl. premounted 3/8" manual self closingdrinking bubbler, incl. screws and dowels.
TECHNICAL DATA
bowl - bowl depth 20.00 mm
bowl - depth 256.00 mm
bowl - width 210.00 mm
drinking bubbler included
glass filler no
waste size DN 20
waste kit included yes
waste hole projection 153.00 mm
waste hole position centre
type of operation manual operation
type of mounting wall mounting
surface material stainless steel
surface finish satin finished
overall width 310.00 mm
overall height 200.00 mm
overall depth 260.00 mm
outlet size DN 20
net weight 3.00 kg
material thickness 1.20 mm
material code 1.4301 Chrome Nickel steel V2A
material stainless steel
gross weight 3.40 kg
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-06-06
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-06-06
DRINKING FOUNTAIN:ANMX301ANMX301 | 2000071854ARTICLE GROUP : ANMX301 | ARTICLE FAMILY : Drinking fountains unchilled | PRODUCT GROUP : Water dispensers |MODELRANGE : ANIMA
Drinking water fountain for floor or wall mounting, stainless steel, surface satin finished, material thickness 1 mm, flat pressed top,rectangular shape, rounded edges, without overflow, 19mm waste, drainage centric, incl. premounted 3/8" manual self closingdrinking bubbler, with floor standing trap cover, incl. screws and dowels.
TECHNICAL DATA
bowl - bowl depth 20.00 mm
bowl - depth 256.00 mm
bowl - width 210.00 mm
drinking bubbler included
glass filler no
gross weight 9.90 kg
material stainless steel
material code 1.4301 Chrome Nickel steel V2A
material thickness 1.20 mm
net weight 9.50 kg
outlet size DN 20
overall depth 260.00 mm
overall height 840.00 mm
overall width 310.00 mm
surface finish satin finished
surface material stainless steel
type of mounting floor mounting
type of operation manual operation
waste hole position centre
waste hole projection 153.00 mm
waste kit included yes
waste size DN 20
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-06-06
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-06-06
DRINKING FOUNTAIN:ANMX306ANMX306 | 2000100304ARTICLE GROUP : ANMX306 | ARTICLE FAMILY : Drinking fountains unchilled | PRODUCT GROUP : Water dispensers
The Franke Sissons Wall hung Drinking Fountain with bottle filler is ideal for schools and colleges where the drinking of water hasbeen shown to improve levels of concentration in students and increase academic achievement. The compact drinking fountainincorporates a water bubbler and a bottle filler to save space in busy corridors and washrooms. Drinking water fountains aremanufactured from grade 304 stainless steel, material thickness 1.2mm, supplied complete 19mm waste and water bubbler tap. Thewall mounted model is simply fixed to the wall using a joggle strip and integral mounting brackets.
TECHNICAL DATA
bowl - bowl depth 20.00 mm
bowl - depth 256.00 mm
bowl - width 210.00 mm
gross weight 3.60 kg
material stainless steel
material code 1.4301 Chrome Nickel steel V2A
material thickness 1.20 mm
net weight 3.20 kg
overall depth 258.00 mm
overall height 200.00 mm
overall width 310.00 mm
surface finish satin finished
type of mounting wall mounting
type of operation manual operation
waste hole position centre
waste hole projection 153.00 mm
waste size DN 20
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-03-29
DRINKING FOUNTAIN:ANMX307ANMX307 | 2000101231ARTICLE GROUP : ANMX307 | ARTICLE FAMILY : Drinking fountains unchilled | PRODUCT GROUP : Water dispensers |MODELRANGE : ANIMA
Drinking water fountains are manufactured from grade austenitic stainless steel, material thickness 1.2mm, supplied complete with19mm waste and water bubbler. The wall mounted model is simply fixed to the wall using a joggle strip and integral mountingbrackets. The pedestal version is fixed in the same way as the wall mounted version but incorporates extra fixing points within thepedestal support. No screws or wall plugs supplied.
TECHNICAL DATA
bowl - bowl depth 20.00 mm
bowl - depth 256.00 mm
bowl - width 210.00 mm
gross weight 10.40 kg
material stainless steel
material code 1.4301 Chrome Nickel steel V2A
material thickness 1.20 mm
net weight 10.00 kg
overall depth 258.00 mm
overall height 1,126.00 mm
overall width 312.00 mm
surface finish satin finished
type of mounting floor mounting
type of operation manual operation
waste hole position centre
waste hole projection 153.00 mm
waste size DN 20
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-03-29
CHILLER: ANMX308ANMX308 | 2000101232ARTICLE GROUP : ANMX30++ | ARTICLE FAMILY : Drinking fountains chilled | PRODUCT GROUP : Water dispensers
The range of Water Gem water coolers and drinking fountains from Franke Sissons offer a low maintenance and reliable solutionwhere chilled drinking water is required in commercial buildings. Available as either floor standing or wall mounted and with orwithout a bottle filler, the products are connected direct to the mains water supply and supply an unlimited amount of chilled waterwhich always has a fresh taste. The products are made from durable coated steel panels and have an easy to open front pane forinstallation and maintenance. The key for the Water gem products is the same as for the Franke Rodan series of washroomaccessories to simplify the number of keys needed for maintenance purposes. The products are provided with a chlorine basedwater filter as standard and this is recommended to be replaced every 6 months. Replacement filters are available from FrankeSissons.
With water filter
TECHNICAL DATA
drinking bubbler yes
glass filler no
gross weight 16.00 kg
material stainless steel
material code 1.4301 Chrome Nickel steel V2A
material thickness 1.20 mm
net weight 15.00 kg
outlet size DN 32
overall depth 325.00 mm
overall height 960.00 mm
overall width 328.00 mm
surface finish satin finished
type of mounting floor mounting
type of operation manual operation
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-03-29
CHILLER: ANMX308ANMX308 | 2000101232
ARTICLE GROUP : ANMX30++ | ARTICLE FAMILY : Drinking fountains chilled | PRODUCT GROUP : Water dispensers
ACCESSORY
BREEAM BRACKET:ANMX315
2030016156
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-03-29
CHILLER: ANMX309ANMX309 | 2000101233ARTICLE GROUP : ANMX30++ | ARTICLE FAMILY : Drinking fountains chilled | PRODUCT GROUP : Water dispensers
The range of Water Gem water coolers and drinking fountains from Franke Sissons offer a low maintenance and reliable solutionwhere chilled drinking water is required in commercial buildings. Available as either floor standing or wall mounted and with orwithout a bottle filler, the products are connected direct to the mains water supply and supply an unlimited amount of chilled waterwhich always has a fresh taste. The products are made from durable coated steel panels and have an easy to open front pane forinstallation and maintenance. The key for the Water gem products is the same as for the Franke Rodan series of washroomaccessories to simplify the number of keys needed for maintenance purposes. The products are provided with a chlorine basedwater filter as standard and this is recommended to be replaced every 6 months. Replacement filters are available from FrankeSissons.
With water filter and bottle filler
TECHNICAL DATA
drinking bubbler yes
glass filler yes
gross weight 30.50 kg
material stainless steel
material code 1.4301 Chrome Nickel steel V2A
material thickness 1.20 mm
net weight 30.50 kg
outlet size DN 32
overall depth 325.00 mm
overall height 960.00 mm
overall width 328.00 mm
surface finish satin finished
type of mounting floor mounting
type of operation manual operation
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-03-29
CHILLER: ANMX309ANMX309 | 2000101233
ARTICLE GROUP : ANMX30++ | ARTICLE FAMILY : Drinking fountains chilled | PRODUCT GROUP : Water dispensers
ACCESSORY
BREEAM BRACKET:ANMX315
2030016156
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-03-29
CHILLER: ANMX311ANMX311 | 2000101234ARTICLE GROUP : ANMX311 | ARTICLE FAMILY : Drinking fountains chilled | PRODUCT GROUP : Water dispensers
The range of Water Gem water coolers and drinking fountains from Franke Sissons offer a low maintenance and reliable solutionwhere chilled drinking water is required in commercial buildings. Available as either floor standing or wall mounted and with orwithout a bottle filler, the products are connected direct to the water mains supply and supply an unlimited amount of chilled waterwhich always has a fresh taste. The product requires 240V main electrical supply via a 3 pin plug socket. The coolers are madefrom durable coated steel panels and have an easy to open front panel for installation and maintenance. The key for the Water gemproducts is the same as for the Franke Rodan series of washroom accessories to simplify the number of keys needed formaintenance purposes. The products are provided with a chlorine based water filter as standard and this is recommended to bereplaced every 6 months. Replacement filters are available from Franke Sissons.
With water filter
TECHNICAL DATA
drinking bubbler yes
glass filler no
gross weight 30.00 kg
material stainless steel
material code 1.4301 Chrome Nickel steel V2A
material thickness 1.20 mm
net weight 30.00 kg
outlet size DN 32
overall depth 360.00 mm
overall height 505.00 mm
overall width 432.00 mm
surface finish satin finished
type of mounting wall mounting
type of operation manual operation
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-06-06
CHILLER: ANMX312ANMX312 | 2000101235ARTICLE GROUP : ANMX312 | ARTICLE FAMILY : Drinking fountains chilled | PRODUCT GROUP : Water dispensers
The range of Water Gem water coolers and drinking fountains from Franke Sissons offer a low maintenance and reliable solutionwhere chilled drinking water is required in commercial buildings. Available as either floor standing or wall mounted and with orwithout a bottle filler, the products are connected direct to the water mains supply and supply an unlimited amount of chilled waterwhich always has a fresh taste. The product requires 240V main electrical supply via a 3 pin plug socket. The coolers are madefrom durable coated steel panels and have an easy to open front panel for installation and maintenance. The key for the Water gemproducts is the same as for the Franke Rodan series of washroom accessories to simplify the number of keys needed formaintenance purposes. The products are provided with a chlorine based water filter as standard and this is recommended to bereplaced every 6 months. Replacement filters are available from Franke Sissons.
With water filter and bottle filler
TECHNICAL DATA
drinking bubbler yes
glass filler yes
gross weight 0.00 kg
material stainless steel
material code 1.4301 Chrome Nickel steel V2A
material thickness 1.20 mm
outlet size DN 32
overall depth 360.00 mm
overall height 505.00 mm
overall width 432.00 mm
surface finish satin finished
type of mounting wall mounting
type of operation manual operation
net weight 0.00 kg
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-06-06
BREEAM BRACKET: ANMX315ANMX315 | 2030016156ARTICLE GROUP : ANMX30++ | ARTICLE FAMILY : Drinking fountains chilled | PRODUCT GROUP : Water dispensers
Designed to be used alongside our ANMX308 and ANMX309 floor standing drinking fountain, this bracket enables the unit to befixed to both the wall and floor, concealing any exposed pipework or wires which allows the drinking fountain to sit within the Breeamregulations criteria.
TECHNICAL DATA
Gross weight 4.00 kg
Net weight 4.00 kg
Product code 213.0000.000
Franke Water Systems | [email protected] | www.franke.co.uk | 2019-02-01
DRINKING FOUNTAIN:ANMX330ANMX330 | 2030017683ARTICLE GROUP : ANMX330 | ARTICLE FAMILY : Drinking fountains unchilled | PRODUCT GROUP : Water dispensers
Drinking fountains are manufactured from 304 stainless steel, pressing has a material thickness of 1.2 the supporting body andfixing bracket is 1.2. Comes complete with a choice of bubbler or bubbler and bottle filler, a chlorine waterfilter, (replacementrequired approx ever 6 months) fitted waste and low inlet P trap, plumbing connections and a secure access panel. They aremounted to the wall using a bracket that is simply fixed to the wall, the drinking fountain slides and hooks on and is secured withscrews at the sides
TECHNICAL DATA
waste size DN 32
waste kit included yes
waste hole position centre
type of operation manual operation
type of mounting wall mounting
surface finish satin finished
overall width 350.00 mm
overall height 256.00 mm
overall depth 350.00 mm
net weight 4.50 kg
material code 1.4301 Chrome Nickel steel V2A
material stainless steel
gross weight 4.70 kg
glass filler no
drinking bubbler included
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-06-06
DRINKING FOUNTAIN:ANMX330ANMX330 | 2030017683ARTICLE GROUP : ANMX330 | ARTICLE FAMILY : Drinking fountains unchilled | PRODUCT GROUP : Water dispensers
SPARE PART
B9094
2030018856
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-06-06
DRINKING FOUNTAIN:ANMX331ANMX331 | 2030017686ARTICLE GROUP : ANMX330 | ARTICLE FAMILY : Drinking fountains unchilled | PRODUCT GROUP : Water dispensers
Drinking fountains are manufactured from 304 stainless steel, pressing has a material thickness of 1.2 the supporting body andfixing bracket is 1.2. Comes complete with a choice of bubbler or bubbler and bottle filler, a chlorine waterfilter, (replacementrequired approx ever 6 months) fitted waste and low inlet P trap, plumbing connections and a secure access panel. They aremounted to the wall using a bracket that is simply fixed to the wall, the drinking fountain slides and hooks on and is secured withscrews at the sides
TECHNICAL DATA
drinking bubbler included
glass filler yes
gross weight 4.90 kg
material stainless steel
material code 1.4301 Chrome Nickel steel V2A
net weight 4.70 kg
overall depth 350.00 mm
overall height 461.00 mm
overall width 350.00 mm
surface finish satin finished
type of mounting wall mounting
type of operation manual operation
waste hole position centre
waste kit included yes
waste size DN 32
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-06-06
DRINKING FOUNTAIN:ANMX331ANMX331 | 2030017686ARTICLE GROUP : ANMX330 | ARTICLE FAMILY : Drinking fountains unchilled | PRODUCT GROUP : Water dispensers
SPARE PART
B9094
2030018856
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-06-06
DRINKING FOUNTAIN: G20100NG20100N | 2000100146ARTICLE GROUP : G20100N | ARTICLE FAMILY : Drinking fountains unchilled | PRODUCT GROUP : Water dispensers
Drinking water fountains are manufactured from grade austenitic stainless steel, material thickness 1.2mm, supplied complete with19mm waste and water bubbler. The wall mounted model is simply fixed to the wall using a joggle strip and integral mountingbrackets.
TECHNICAL DATA
bowl - bowl depth 135.00 mm
bowl - depth 310.00 mm
bowl - width 264.00 mm
gross weight 3.20 kg
material stainless steel
material code 1.4301 Chrome Nickel steel V2A
material thickness 1.20 mm
overall depth 135.00 mm
overall height 264.00 mm
overall width 310.00 mm
surface finish satin finished
type of mounting wall mounting
type of operation manual operation
waste hole position centre
waste hole projection 150.00 mm
waste size DN 20
net weight 2.80 kg
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-03-30
DRINKING FOUNTAIN: G20109NG20109N | 2030013430ARTICLE GROUP : G20100N | ARTICLE FAMILY : Drinking fountains unchilled | PRODUCT GROUP : Water dispensers
Drinking water fountains are manufactured from grade austenitic stainless steel, material thickness 1.2mm, supplied complete with19mm waste and water bubbler. The wall mounted model is simply fixed to the wall using a joggle strip and integral mountingbrackets.
Centinel wall hung drinking fountain with bottle filler 310x264x135mm
TECHNICAL DATA
waste size DN 20
waste kit included yes
waste hole position centre
surface finish satin finished
overall width 310.00 mm
overall height 135.00 mm
overall depth 264.00 mm
net weight 3.40 kg
material code 1.4301 Chrome Nickel steel V2A
material stainless steel
gross weight 3.80 kg
Franke Water Systems | [email protected] | www.franke.co.uk | 2016-06-06