FMP50 PeriFlo FMP Seriespulsa.salesmrc.com/pdfs/PF_TechSheet_FMP50_Fnl.pdfFMP50: Direct connect....
Transcript of FMP50 PeriFlo FMP Seriespulsa.salesmrc.com/pdfs/PF_TechSheet_FMP50_Fnl.pdfFMP50: Direct connect....
ENGINEERED PRODUCTS
Peristaltic pumps deliver more than you expect
FMP50
Flowto 34.6 gpm (130 lpm)
Pressureto 115 psi (7.9 bar)
TemperatureProduct to 176° F (80° C)Ambient to 104° F (40° C)
ApplicationsMetering, batching, transfer and sampling
FMP50: Direct connect. Reliable. Performance.With their roller design, commercial gear drives and cartridge-style rotor bearings, FMP pumps are perfect for high-volume applications. Like all Pulsafeeder peristaltic pumps, the FMP50 is ideally suited for water and wastewater treatment, petrochemical and mining industries — including slurries, sludge, reagents, chemicals, and polymers.
PeriFlo® FMP Series
Simple operating design The simple design of a PeriFlo® pump results in a pump that is valveless and sealless (creating a gentle pumping action), has reversible rotation, high suction lift, higher solids content handing ability and easy maintenance.
Variety of MediaThanks to its gentle pumping action, a peristaltic pump can handle a variety of media where other technologies are unsuccessful, including chemicals, slurries, viscous, abrasive or shear sensitive media such as polymers.
Pump Longer The simple design means there are no valves to change and no seals to replace. The hose or tube element is the common wear part and is easy to replace. This means less down-time, less spare parts inventory and more pumping.
87.180
60
40
20
00 5 10 15 20 25 31.37
Spee
d R
PM(b
ased
on
1725
RP
M m
otor
)
Flow GPM30 PSI / 87.1 RPM60 PSI / 49.3 RPM 60 PSI / 87.1 RPM115 PSI / 27.3 RPM 115 PSI / 49.3 RPM
Note: Continuous Duty = run time greater than 2 hoursIntermittent Duty = run time less than 2 hours with a 1 hour rest period between run times
Max Pressure/RPMfor Continuous Duty CycleIntermittent Duty Cycle
Flow vs. RPM
19.0483.0
25.6650.4
.26.0
14.7373.0
1.50 - 150# RF FLANGES
3.383.0
20.0507.6
VARIES WITH MFG
16.1410.0
25.7654.0
6.6168.0
28.7730.0
2X 4.6117.0
2X 16.3415.0
2X 17.8451.0
CLEARANCE FORM12 BOLTSMeasurements: in
[mm]
PFFMP50spec_Rev0815
Spec Pulsafeeder. Get more than you expect.
ENGINEERED PRODUCTS
Pulsafeeder, Inc.2883 Brighton Henrietta Town Line Road • Rochester, NY 14623Phone: +1 (585) 292-8000 • [email protected] pulsa.com
PerformanceSpecifications
Features & Benefits
Materials of Construction
Drives & Accessories
Dimensions
Max capacity 0.36 gal/rev
Max flow rate 34.6 gpm (130 lpm)
Connections 1.5" ANSI Flange, 150#
Compressor Rollers
Max hose pressure 115 psi (7.9 bar)
Top View
Side View
Front view
• Sealless and Valveless• Close coupled• Sealed bearing housing • Abrasion resistant• Dry-run capable• Self priming to 27 ft.• Reversible rotation• Easy maintenance
• Variable speed controls with industry standard I/O’s
• Tube/Hose leak detection • Pulsation dampeners • Suction accumulators• Pressure relief valves
Hose: Natural rubber, Buna, EPDMConnections: ANSI Flange, 150#
Standard: Stainless steel Optional: Halar® coated
Casing: Epoxy painted cast steelRotor: Epoxy painted steelRollers: Black oxide steelHardware: Stainless steel
PeriFlo® FMP50
FMP50 Weight (with standard motor): 62 lbs.
© Copyright 2015 Pulsafeeder. All Rights Reserved. Halar® is a registered trademark of Solvay Solexis.