Flexiform Revit User Guide: Freestor Lockers

FREESTOR LOCKERSREVIT USER GUIDE

Compatible with Revit 2012 onwards

Version 1.0

Freestor Lockers4 800mm or 1000mm wide4 1017mm or 1322mm high

Freestor Combination Storage / Raised Level

4 Multiple finishes4 See specification guides for full product variants

Freestor LockersRevit Blocks

Cabinet-Flexiform-Freestor-

Locker_1322_High-8-Locker_12.rfa








Locker_1322_High-3-Drawer_

And_3-Locker_12.rfa



And_3-Locker_12.rfa



And_2-Locker_12.rfa



And_2-Locker_12.rfa



And_4-Locker_12.rfa

Loading the components into a project.

Flexiform Flexilink Racking blocks are standard family components. After downloading the file, save it locally, then load into your project using the Insert – Load Family Tab.

1. In the project folder that you are working in, go to ‘Insert Tab/ Load Family’ … Select the component from your saved location as shown below:

2. Navigate to the location of the saved Flexilink Racking folder. Select the desired family to load from appropriate folder.

Using the Flexilink Racking component families.

Flexilink Racking is a range consisting of a vast number of components. For ease of use it has been grouped into a starter and extension bay that can be used for visual reference in your model. For a specific arrangement containing product codes, please contact Flexiform Customer Services.

1. Flexilink Racking folder contains two families-‐ a starter and an extension bay. Load in both families into your project. Place a starter bay on the ground plane, type in the required width, height and depth.

2. Note-‐ Sizes available are listed in the component properties. If incorrect value is entered, an error message will appear in floor plan view.

LOADING THE COMPONENTS INTO A PROJECT

MATERIALS

Flexiform Freestor Lockers Storage blocks are standard family components. After downloading the file, unzip contents and move it to your project folder, then load into your project using the Insert – Load Family Tab.

In the project folder that you are working in, go to ‘Insert Tab/ Load Family’… Select the component from your saved location as shown below:

Navigate to the location of the saved Flexiform Freestor Lockers folder. Select the desired family to load from appropriate folder.

Flexiform MFC Top materials have been created using bespoke finish images. There is a folder called “Materials JPEG” included in the download of Freestor LockersSave it locally together with downloaded files. When using an MFC Top material, re-link the image to appropriate file in the materials folder.

More files are available to download at www.bimstore.co.uk/flexiform For help and support please contact 01274 706206 or email [email protected]

1.

2.

BradfordFlexiform1392 Leeds RoadBradfordWest YorkshireBD3 7AE

t: 01274 706206f: 01274 665760

LondonFlexiform1st Floor45 Gee StreetLondonEC1V 3RS

t: 0207 226 9955f: 0203 301 0435

ScotlandFlexiformUnit 7 Bloom FarmMain StreetLivingston VillageWest LothianEH54 7AF

t: 01506 417410f: 01506 418970

www.flexiform.co.uk

Company Registration Number 02542123

Flexiform Revit User Guide: Freestor Lockers

Documents

Transcript of Flexiform Revit User Guide: Freestor Lockers