FREESTOR STORAGE

TAMBOUR WARDROBE

Unit FeaturesCarcass: 4 stage treatment process steel. Fully welded for exceptional rigidity and stiffness. Side panels are non load bearing and are fixed to top, back and base. No joins in the carcass to front or side elevations. Tambour Shutter: Co extruded plastic slats with a smooth exterior surface. Run smoothly in an inset one piece injection moulded track fitted at the base and top of the cabinet.Lock: Two point locking Lowe and Fletcher lock type 5689-2 Levelling: Floor levelling feet supplied.Handles: Insert handle with magnetic closure.Components: 20swg inner panels incorporate 12.7mm slot centres to enable shelf to be altered.

DimensionsHeights: 2007mmHeights (with MFC top): N/aWidths: 800mm and 1000mmDepth: 600mm

ComponentsOne hat shelf with hanging rail. Captive coat hangers to be ordered separately.

DeliveryThese units are delivered pre-assembled.

Tested ToBS EN 14073-2:2004, BS EN 14073-3:2004, BS EN14074:2004.

www.flexiform.co.uk

MaterialsMFC Top Panel: 25mm melamine faced chipboard (M.F.C) with 2mm ABS matching edging. British standard 476 class 1 surface spread of flame. Meets E1 European standards on Formladehyde emissions. Steel: Powder coated steel with minimum paint coverage thickness of 35 Microns. Indentation, cross cut+adhesion and bend tested. FinishesStandard Flexiform finishes. Additional colour options available (may incur an upcharge).

MFC: Light Oak (MOK), White (WHM), Beech (MOB), Maple (MOM), Grey (MOG), Walnut (MOW), Romano Cherry (RCM).

Steel: RAL 9006 Silver (JOS), RAL 7024 Graphite (GGS), RAL 7035 Pale Grey (PGS) and RAL9016 White (JWS).

Recyclable Content94% recyclable.

Warranty15 years from installation.

Freestor Tambour Wardrobe

H: 740mm

H: 2007mm H: 1720mm H: 1677mm H: 1490mm H: 1322mm H: 1200mm H: 1110mm

H: 1090mm H: 1017mm H: 720mm H: 715mm H: 695mm