TEQIP-2 sponsored NATIONAL CONFERENCE

ON RECENT TRENDS IN MECHANICAL AND PRODUCTION ENGINEERING

(RTMPE 2013) 29 - 30 November 2013

Organized by

Mechanical Engineering Department Samrat Ashok Technological Institute

(Engineering College) Vidisha (M.P.)- 464001 Objectives In the global competitive customer-centric scenario, the field of Mechanical and Production Engineering is developing at a rapid pace. This development is seen in several arms of Mechanical and Production Engineering such as Thermal, Innovative Design, Manufacturing, Industrial Engineering, Automobile, Energy, Production and Quality Management, etc. These advancements not only act as motivating factor for further development but also provide us stimulants for the betterment of living standards and exhilarate new ideas and vistas. This is a challenge for today’s Engineer who is forced to keep abreast with the recent trends and contribute through continuous research and development. RTMPE 2013 National Conference on Recent Trends In Mechanical And Production Engineering (RTMPE 2013) is intend to provide a common platform to bring together researchers, engineers, scientists, professionals and scholars to exchange and share their ideas, experience and research about different aspects of Mechanical and Production Engineering, and discuss the practical challenges encountered and the solutions adopted. Original papers/articles/case studies related to any topic of Mechanical and production engineering will be accepted after review by experts. The conference will include sessions for technical paper presentation and lectures by eminent speakers. Conference Theme The conference topics include, however not limited to the following broader area:- Thermal Engineering, HMT, IC Engines, Automobile Engineering, Refrigeration and Air conditioning, Turbo Machines, Renewable and Non Renewable Energy sources, Energy Conservation, Fuel Cell Technology, CFD, Design Engineering, Industrial Engineering, CAD, FEA/FEM, Tribology and Maintenance, Simulation and Modeling, Stress Analysis and Fracture Mechanism, Robotics and Automation, Flexible Manufacturing System, CAD/CAM, Computer Integrated Manufacturing, Automated Material Handling System, Artificial Intelligence and Expert systems, ERP, MIS, Rapid Prototyping, Intelligent Manufacturing Systems, TQM/TPM, e-manufacturing, Mechatronics, Programmable Logic Controllers, Automated Storage and Retrieval system, Quality Control Systems, Sensors and Recognition Systems, MEMS, Micro Manufacturing, QFD, Six Sigma, SCM, Agile Manufacturing, Lean Manufacturing, Group Technology, Cellular

Manufacturing, Nanotechnology, Metal cutting and Tool design, Knowledge Management in Manufacturing. Call for papers The Original and unpublished papers are invited for presentation in the conference. Authors are requested to send abstract of their paper on e-mail limited to maximum 300 words explaining the essential contents of the work, key ideas and results. After acceptance the full length paper is to be submitted on e-mail in MS-word format with at least 1.25 inch left margin and 0.5 inch on all other side using TIMES NEW ROMAN font having main text size 12 point and heading 14 points with 1.25 spacing single column. The paper should also be sent on A4 size paper along with Registration Form and Fee. Registration Authors are required to send Registration Form in prescribed format dully filled with registration fee payment through Account Payee DD to be drawn in favour of Director, SATI (Deg.) payable at Vidisha (M.P.). Registration fee: Research Scholar / Students Rs. 500

Academia / R&D institutions Rs. 1000 Industry Rs. 1500

Important Dates:

Last date for Submission of Abstract 07.10.13 Date for notifying Acceptance of Abstracts 12.10.13 Last date for full paper Submission on e-mail 20.10.13

Last date for registration 28.10.13 Publication of Proceedings:

Accepted paper for the conference will be published in the form of proceedings with ISBN no., which will be circulated to all the delegates and in the library of technical institutions. Selected papers may also be considered after peer review for the publication in “SATI journal of Science and Technology” (ISSN 0973-4007)

Accommodation:

Accommodation for delegates would be provided on payment basis in nearby Hotels / Institute Guest House (subjected to availability) with request well in advance. ------------------------------------------------------------------------------------------------------------

Chief Patron : Er. Pratap Bhanu Sharma, Chairman Managing Committee SATI vidisha (M.P.) Patron : Dr. R. C. Jain Director, SATI (Engg.) Vidisha (M.P.) Advisory Committee

• Prof. D.P. Agrawal , Chairman ,UPSC New Delhi • Prof. V. K. Jain, Professor Mechanical Engineering, IIT Kanpur • Prof. P. K. Jain , Professor Mechanical and industrial Engineering, IIT Roorkee. • Prof. S. K. Agrawal, Professor Mechanical Engineering, MNNIT, Allahabad. • Prof. S. K. Garg, Professor Mechanical Engineering, Delhi Tech. University Delhi • Prof. K. C. Jain, Ex-Tech Advisor, GSMIR, Indore (M.P.) • Prof. S. K. Shukla, Professor, Mechanical Engineering, IIT- BHU, Varansi. • Prof R. C. Gupta, Prof. & Head, Industrial & Prod. Engg. SGSITS Indore (M.P.) • Prof. J.L. Bhagoria Professor, Mechanical Engineering, MANIT , Bhopal (M.P.) • Er. P. K. Mishra, Add. G.M. BHEL, Corporate Office, New Delhi

• Er. Sanjay Kalgaonker, Director, NHPC , Jammu & Kashmir • Er. Nitin Dhimole , Chairman , Railway Recruitment Board, Bilaspur (C.G.) Organizing Committee:

Chairman Prof. Lokesh Bajpai , Prof.& Head , Mechanical Engineering Department

Co-Chairman Prof. Sanjay Katarey

Convener and Organizing Secretary

Prof. Pankaj Agarwal

Coordinators Prof. Sandeep Jain Prof. Sanjay Jain

Co-Convener Prof. P. L. Verma Prof. Ashish Manoria

Co-Coordinators Prof. S. K. Dhakad Prof. R. M. Saxena Prof. C. P. Singh Prof. Neeraj Sen

Members Prof. Kamlesh Sharma Prof. J P Shakya Prof. Pankaj Sonkusre Prof. Pankaj Dubey

About Institute

The Institute was established in 1960 under the “Open Door” Policy of the Government of India, by Maharaja Jiwajirao Education Society Vidisha. The institute offers Nine full time and Six Part-time undergraduate courses leading to degree in Bachelor of Engineering and Twelve Postgraduate courses in the areas of Engineering (M.E./M.Tech), Master of Computer Applications (MCA), Masters of Business Administration (MBA), Four P.G. courses in Applied Sciences, and Full Time/ Part Time Ph.D. Programmes with approx 3000 students. It is an autonomous institute, which is fully funded by Government of Madhya Pradesh and managed by the Maharaja Jiwaji Rao Education Society chaired by Hon'ble Shrimant Jyotiraditya M. Scindia. The college campus is spread over an area of 85 acres of lush green land with natural surroundings. The College campus is on a few minutes’ walk from the Railway Station and is situated in the Civil Lines area.

About Vidisha

The Institute is located in Vidisha in the heartland of Madhya Pradesh, just 54 km by rail from the state capital Bhopal, on the Delhi-Chennai, Delhi-Bombay Central Rail main line with the stoppage of most of the trains. Nearest Airport is located at Bhopal. Vidisha town is of great antiquity and immense historical and archeological importance. It is strewn with several famous monuments in its immediate vicinity, such as the Stupas of Sanchi, the Udaigiri Caves, the Udayeshwar temple in Udaigiri , the Mala Devi temple in Gyaraspur and the Heliodorus Pillar and Vijaymandir on the ourskirts of the town of Vidisha itself.

Address for correspondence Dr. Pankaj Agarwal, Convener & Organizing Secretary RTMPE 2013 Professor Mechanical Engineering Department Samrat Ashok Technological Institute (Engineering College) Vidisha (M.P.) 464001 Tel:07592-250449, Cell -9826278881, e-mail : dr_pankajagarwal@rediffmail.com ---------------------------------------------------------------------------------------------------------------------------------- For further details visit our website: www.satiengg.org , Conference e-mail: con13@satiengg.org , rtmpe@rediffmail.com ------------------------------------------------------------------------------------------------------------

National Conference

on RECENT TRENDS IN MECHANICAL AND PRODUCTION ENGINEERING

(29 - 30 November 2013) -: Organized by :-

Mechanical Engineering Department Samrat Ashok Technological Institute (Engg. College) Vidisha (M.P.) 464001

REGISTRATION FORM

Name : ……………………………………..………………………………………..……

Designation, Department &Organization: ………………………………………..………

……………………………………….…………………………………………………

Address for Communication: ………………………………………..……………………

………………………………………..………………………………………..……………

Cell phone No : ……………….………………………………………..…………………

Email: …………………………………..………………………………………..……

Title of Paper: ………………………………………..……………………………………

………………………………………..………………………………………..…………… Category (Please Tick) : Industry / Faculty / Student

Details of DD/ Payment: ………………………………………..…………………………

………………………………………..………………………………………..……………

Name & Signature of the participant Signature & Seal of the Head of The Department / Institute