Femap 11.3 What’s New - Siemens PLM...
Transcript of Femap 11.3 What’s New - Siemens PLM...
03.29.2016
Unrestricted © Siemens AG 2016
Page 2 Siemens PLM Software
Femap Release Schedule
Regular release schedule
• v11.3 April 2016
• v11.2 March 2015
• v11.1 November 2013
• v11: January 2013
• v10.3.1: January 2012
• v10.3: October 2011
• v10.2: October 2010
• v10.1.1: January 2010
• v10.1: August 2009
• v10: December 2008
03.29.2016
Unrestricted © Siemens AG 2016
Page 3 Siemens PLM Software
Femap Direction
• A modeling environment that’s dedicated to FEA
• The in-depth, detailed functionality required to accurately model real-world
parts and assemblies
• Customer driven features and functionality
03.29.2016
Unrestricted © Siemens AG 2016
Page 4 Siemens PLM Software
Femap 11.3
Overview
New functionality and updates
• Preprocessing
• Meshing
• Solver support
• Postprocessing
• Performance
03.29.2016
Unrestricted © Siemens AG 2016
Page 5 Siemens PLM Software
Preprocessing
Draw/Erase Toolbar
• New toolbar for Draw/Erase
• Fast access to mesh and geometry on/off
• Choose entities to draw or erase
• Toggle back and forth
• Choose by element, property or material
• Grow/shrink selection
• Mesh only, geometry only, or linked
• Create Femap group from draw/erase data
• Load Femap group into draw/erase data
03.29.2016
Unrestricted © Siemens AG 2016
Page 6 Siemens PLM Software
Preprocessing
New View Rotation Options
• Default option still “Rotate about View Center”
• Similar to v11.2.x – first two items toggle
between view center and rotation center but
you will always be prompted to specify rotation
center
• New option – choose between rotating about
the “view axes” (screen) or the “model axes”
(global csys)
• New option – “Rotate about Coordinate
System” – simply pick a Femap csys
• “Rotate around vector” same as v11.2.x “rotate
around rotation axis”
Femap v11.2.x
03.29.2016
Unrestricted © Siemens AG 2016
Page 7 Siemens PLM Software
Preprocessing
Rotate Around Cursor
• Accessed via File / Preferences /
User Interface OR add a toolbar
icon
• Model rotates about the closest
entity on screen
• Model never swings out of view!
Pick Here
03.29.2016
Unrestricted © Siemens AG 2016
Page 8 Siemens PLM Software
Preprocessing
Zoom Around Cursor
Accessed via File / Preferences / User Interface OR add a toolbar icon
Zoom Here
03.29.2016
Unrestricted © Siemens AG 2016
Page 9 Siemens PLM Software
Preprocessing
Roll Thru Mode
• Roll-Thru: move “inside” the model
With Roll-Thru off (and in all previous
versions of Femap) you cannot move
through your model, you just zoom
closer and closer
• Roll-Thru moves the viewer’s eye to
a certain depth in the screen
direction, everything behind that is
clipped
• Zoom in enough and you’re inside,
and can turn around and see what
was behind you
03.29.2016
Unrestricted © Siemens AG 2016
Page 10 Siemens PLM Software
Preprocessing
Connection Manager
• New connection editor
• Easier management and access to connections
• Direct editing
• Sorting
• Filters
03.29.2016
Unrestricted © Siemens AG 2016
Page 11 Siemens PLM Software
Preprocessing
Streamlined Element Face Picking
• Face picking automatically loads
currently displayed elements as
possible entities to pick from
• Adjacent faces is now the default
• With front picking turned on, only
front faces can be selected, so
any face based selection can be
made with a single double-click
03.29.2016
Unrestricted © Siemens AG 2016
Page 12 Siemens PLM Software
Preprocessing
Streamlined Element Face Picking
• Combined with the Draw/Erase
toolbar, connection setup for mesh
only parts is much easier and faster
• Workflow:
• With the front picking option turned
on
• Choose draw on the Draw/Erase
toolbar, and select the Element
option, then pick one element on
each leg
• In the selection box, choose Add All
Connected Elements
• Click OK
03.29.2016
Unrestricted © Siemens AG 2016
Page 13 Siemens PLM Software
Preprocessing
Streamlined Element Face Picking
• Workflow (continued)
• Go to Connect / Connection
Region, choose elements, select
the Add Multiple button
• The visible elements are already
loaded, pick one on the end and
click OK
• All the connected faces are picked
automatically, repeat each time for
the ends
• In just a couple of clicks, six
connection regions are created
03.29.2016
Unrestricted © Siemens AG 2016
Page 14 Siemens PLM Software
Preprocessing
Streamlined Element Face Picking
Workflow (continued)
• While still in the Connect /
Connection Region command, you
can use the Draw/Erase toolbar to
swap the drawn entities to pick the
other side of the connection
03.29.2016
Unrestricted © Siemens AG 2016
Page 15 Siemens PLM Software
Preprocessing
Beam Modeling Enhancements
Cross section input help
03.29.2016
Unrestricted © Siemens AG 2016
Page 16 Siemens PLM Software
Preprocessing
Beam Modeling Enhancements
Immediate feedback of basic
cross section information
03.29.2016
Unrestricted © Siemens AG 2016
Page 17 Siemens PLM Software
Preprocessing
Beam Modeling Enhancements
Press the
“Compute All
Properties” button
for full calculations
Shear center
03.29.2016
Unrestricted © Siemens AG 2016
Page 18 Siemens PLM Software
Preprocessing
Beam Modeling Enhancements
Send report to
clipboard
Save report to BMP,
JPEG, PNG, GIF,
TIFF
03.29.2016
Unrestricted © Siemens AG 2016
Page 19 Siemens PLM Software
Preprocessing
Beam Modeling Enhancements
Works with Nastran
shapes as well
And any custom
shape
03.29.2016
Unrestricted © Siemens AG 2016
Page 20 Siemens PLM Software
Preprocessing
Pick Visible
New method for front picking
• Turn on/off in File / Preferences / Graphics
• Much faster than database access
• Uses OpenGL (basic and performance)
to keep track of which ID is front
• If an entity is not represented by a pixel,
it will not be picked, i.e. blocked by
something else, or so small it did not
make a single pixel
• Works in single pick, box, circle,
polygon, etc.
03.29.2016
Unrestricted © Siemens AG 2016
Page 21 Siemens PLM Software
Preprocessing
Unique Property Icons
• Unique property icons for properties
03.29.2016
Unrestricted © Siemens AG 2016
Page 22 Siemens PLM Software
Preprocessing
Intelligent Entity Availability
• Only Properties which are appropriate for current Element type are available
• Only Connection Regions are available when creating a Connector
03.29.2016
Unrestricted © Siemens AG 2016
Page 23 Siemens PLM Software
Preprocessing
Renumber All
• Renumber all
03.29.2016
Unrestricted © Siemens AG 2016
Page 24 Siemens PLM Software
Preprocessing
API Program File Libraries
• Custom Tools
• Library of API programs delivered with the software
• User Tools
• Reference for your own corporate-wide API program library
03.29.2016
Unrestricted © Siemens AG 2016
Page 25 Siemens PLM Software
Preprocessing
Miscellaneous
• Plane to Plane method now available when using commands on the Modify,
Align… menu. Similar to Between Coordinate Systems method, with specified
plane defining X and Y axes, plane normal defining Z axis.
• Loads
• Added ability to modify the color, modify the layer, scale the values, change
the function ID, or delete loads of specified type(s) in the active Load Set, All
Load Sets, or any number of selected Load Sets.
• Updated Modify, Update Other, Load Phase and Delete, Model, Load - Body
commands to allow selection of any number of Load Sets.
• Constraints
• Added ability to modify the color, modify the layer, or delete constraints of
specified type(s) in the active Constraint Set, all Constraint Sets, or any
number of selected Constraint Sets.
03.29.2016
Unrestricted © Siemens AG 2016
Page 26 Siemens PLM Software
Femap 11.3
Overview
New functionality and updates
• Preprocessing
• Meshing
• Solver support
• Postprocessing
• Performance
03.29.2016
Unrestricted © Siemens AG 2016
Page 27 Siemens PLM Software
Meshing
Quad Meshing Improvements
• Max Quads
• Goal: all quad mesh through triangle removal
• Will allow triangles when required
• With an odd number of edges there will always be one triangle
• Example: default mesh contains 39 triangles – with Max Quads it’s just 1
Default mesh Max Quads mesh
03.29.2016
Unrestricted © Siemens AG 2016
Page 28 Siemens PLM Software
Meshing
Quad Meshing Improvements
• Max Quads
• Mesh size changed by 1 – all triangles removed!
03.29.2016
Unrestricted © Siemens AG 2016
Page 29 Siemens PLM Software
Meshing
Quad Meshing Improvements
Max Quads combined with Quad Layers provides maximum mesh customization
and flexibility
03.29.2016
Unrestricted © Siemens AG 2016
Page 30 Siemens PLM Software
Meshing
Quad Meshing Improvements
• Internal element growth now available with quad meshes
03.29.2016
Unrestricted © Siemens AG 2016
Page 31 Siemens PLM Software
Meshing
Mesh Smoothing Improvements
• New smoothing algorithm for highly curved surfaces
03.29.2016
Unrestricted © Siemens AG 2016
Page 32 Siemens PLM Software
Meshing
Interactive Mesh Refine
• Interactive update of shell/line mesh
• Auto transition
• Shrink/grow selection
• Drag selection
• Loads/constraints propagated automatically
03.29.2016
Unrestricted © Siemens AG 2016
Page 33 Siemens PLM Software
Meshing
Interactive Mesh Refine
Example:
• From an existing Nastran input file imported into Femap, mesh refinement is
required in the two areas indicated
03.29.2016
Unrestricted © Siemens AG 2016
Page 34 Siemens PLM Software
Meshing
Interactive Mesh Refine
Example (continued)
• At the T junction use Split Edges option
• Choose Edges
• Grow
• Done
03.29.2016
Unrestricted © Siemens AG 2016
Page 35 Siemens PLM Software
Meshing
Interactive Mesh Refine
Example (continued)
• At the hole, refine using Split Edges twice
03.29.2016
Unrestricted © Siemens AG 2016
Page 36 Siemens PLM Software
Meshing
Interactive Mesh Refine
Example (continued)
03.29.2016
Unrestricted © Siemens AG 2016
Page 37 Siemens PLM Software
Meshing
Multiple Element Splitting
• Multiple elements (nodes) can be
selected for splitting in a single
command
• More efficient mesh refinement
process
03.29.2016
Unrestricted © Siemens AG 2016
Page 38 Siemens PLM Software
Meshing
Hard Point Auto Update – Meshing Toolbox
Mesh hard point auto-update
within meshing toolbox
Meshing toolbox commands
that update surfaces will now
automatically manage
moving mesh hard points to
any split surfaces
03.29.2016
Unrestricted © Siemens AG 2016
Page 39 Siemens PLM Software
Meshing
Geometry Cleanup – Meshing Toolbox
Small curves and extraneous points are
captured in the mesh
New feature removal tools to
permanently remove them
Similar to composite curves and
composite surfaces, but done at a
geometric (Parasolid) level
03.29.2016
Unrestricted © Siemens AG 2016
Page 40 Siemens PLM Software
Femap 11.3
Overview
New functionality and updates
• Preprocessing
• Meshing
• Solver support
• Postprocessing
• Performance
03.29.2016
Unrestricted © Siemens AG 2016
Page 41 Siemens PLM Software
Solver Support
Abaqus ODB Attach
• First time support of ODB file
• Attach to (instead of internalizing) Abaqus results
• Uses Abaqus scripting interface
• Supports prior version ODB automatically
• Supports field output and recovery of job data including step and increment
files
• Works like currently supported results formats including Nastran OP2 and XDB,
CSV, and Femap FNO
• Fully compatible with all postprocessing functionality
• Selected results can be internalized for data management purposes
03.29.2016
Unrestricted © Siemens AG 2016
Page 42 Siemens PLM Software
Solver Support
Nastran Results Enhancements
Output set titles – existing
TITLE, SUBTITLE, LABEL,
SUBTITLE,LABEL
Title of the overall study
Default
Analysis Set Title
File Name
Nastran Title
Use static subcase IDs – NEW
Track revisions – NEW
03.29.2016
Unrestricted © Siemens AG 2016
Page 43 Siemens PLM Software
Solver Support
Nastran Results Enhancements
Output set titles – existing
TITLE, SUBTITLE, LABEL,
SUBTITLE,LABEL
Title of the overall study
Default
Analysis Set Title
File Name
Nastran Title
Use static subcase IDs – NEW
Track revisions – NEW
03.29.2016
Unrestricted © Siemens AG 2016
Page 44 Siemens PLM Software
Solver Support
Nastran Enhancements
Nastran element quality checks
• Interactive Nastran aspect ratio
checks for linear and parabolic plate
elements added
• Interactive Edge Point Length Ratio
(EPLR) check for TRIA6
• Linear plate Nastran element quality
checks are now available in meshing
toolbox and entity editor
• API access provided for new Nastran
quality checks
• New quality checks also added to
analysis manager NASTRAN
GEOMCHECK dialog
03.29.2016
Unrestricted © Siemens AG 2016
Page 45 Siemens PLM Software
Solver Support
Nastran Enhancements
Nastran frequency response enhancements
• Read and write support for all Nastran FREQ entries
• FREQ, FREQ1, FREQ2, FREQ3, FREQ4 and FREQ5
• New solution frequency tab in Nastran dynamic analysis form
• Created frequency lists available for any analysis set
Select Desired Nastran Format
Enter Required Data
Add Creates the List
Definition
Check box to Select Frequencies
for Current Analysis Set
03.29.2016
Unrestricted © Siemens AG 2016
Page 46 Siemens PLM Software
Solver Support
Nastran Enhancements
Nastran frequency response enhancements
• Selected frequency list definitions are written to analysis set
FREQ 3.1481722.1564039.1646357.1728675.181099321.8610621.90752+ + 22.2562823.0755723.1246123.4927424.2900724.34169 24.729225.50457+ + 25.5587825.7196225.9656626.7190826.7758627.1484827.2021228.57735+ + 30.0062231.43509 FREQ2 3 200. 300. 5 FREQ4 3 200. 300. .1 3
03.29.2016
Unrestricted © Siemens AG 2016
Page 47 Siemens PLM Software
Solver Support
Nastran Enhancements
• Non-zero constraints SPC in constraint set
03.29.2016
Unrestricted © Siemens AG 2016
Page 48 Siemens PLM Software
Solver Support
Nastran Enhancements
• Spring/Damper to Ground
elements (CBUSH)
• NX Nastran documentation:
• If GA and GB are coincident, or
if GB is blank, then CID must
be specified. When GB is
blank, a grounded spring and
damper is created at GA
• In addition, DOF Spring to
Ground elements are now
available (CELAS2)
03.29.2016
Unrestricted © Siemens AG 2016
Page 49 Siemens PLM Software
Solver Support
Solver Launch Control
• Configure multiple solvers within Femap
• Avoids DOS environment variables
• Add additional command line options
• Each analysis set can be connected to a
different solver option
• Integrated (Femap with NX Nastran)
• Enterprise via linked solver
• VisQ for remote batch solving
03.29.2016
Unrestricted © Siemens AG 2016
Page 50 Siemens PLM Software
Solver Support
NX Nastran Solution Control
• Additional command line access
• Default from file – preferences
• Additional GPU control – expect more
options as they become available
03.29.2016
Unrestricted © Siemens AG 2016
Page 51 Siemens PLM Software
Solver Support
ANSYS Command Input
• ANSYS version from Femap setting
• ANSYS product license option
• Choose including input text in output
text
• Jobname and output directory
• Database and workspace memory
• Additional command line arguments
Input shown in the tree of analysis
manager
03.29.2016
Unrestricted © Siemens AG 2016
Page 52 Siemens PLM Software
Solver Support
ANSYS Analysis Monitor
• Same look/feel as
NX Nastran
• Switch between
output text file and
error file
03.29.2016
Unrestricted © Siemens AG 2016
Page 53 Siemens PLM Software
Solver Support
LS-DYNA Translator
• Added support for non-zero
constraints
• Added remaining fields for MAT_54
and will now accept CRIT=0
• Suppress automatic output of
*CONTROL_SOLUTION card
• Limit number of coordinate system
translation messages via max
repeated errors field of preferences’
messages tab
• From analysis manager, provide
ability to define fields of
*CONTROL_IMPLICIT_AUTO and
*CONTROL_IMPLICIT_GENERAL
• Contact card comments now contain
connector and property titles
03.29.2016
Unrestricted © Siemens AG 2016
Page 59 Siemens PLM Software
Solver Support
ANSYS & Abaqus CBUSH/PBUSH Input
• General Issue: ANSYS and Abaqus do not have an element which exactly
matches the (CBUSH/PBUSH in Nastran) Spring/Damper element in Femap
• Additional Requirement: Spring/Damper elements must behave like
CBUSH/PBUSH when solved with ANSYS or Abaqus, otherwise different
results are calculated
• Possible Solution: Simply include stiffness and damping of Spring/Damper
elements when creating input files for ANSYS or Abaqus
• Our Solution: Spring/Damper elements are written as MATRIX27 elements for
ANSYS; written as *MATRIX INPUT for Abaqus; with matrix values (stiffness
and/or damping) calculated using the same approach as CBUSH/PBUSH
• Limitation: nonlinearity and frequency dependency are ignored, as the matrix
entries are calculated only once
03.29.2016
Unrestricted © Siemens AG 2016
Page 60 Siemens PLM Software
Solver Support
ANSYS & Abaqus CBUSH/PBUSH Input
B K
03.29.2016
Unrestricted © Siemens AG 2016
Page 63 Siemens PLM Software
Solver Support
ANSYS & Abaqus CBUSH/PBUSH Input
• Element Stiffness:
ET,3,MATRIX27,0,0,4 !kopt1=0, positive definite/semi-positive
!kop2=0, symmetrical
!kop3=4, stiffness
ANSYS element type number, incremented automatically in Femap
• Element Stiffness Matrix:
78
7776
3324
231413
12321
m
y
s
R,3 !3=real constants number
RMODIF,3,1,K(1,1) !K11 @ 1
RMODIF,3,2,K(1,2) !K12 @ 2
RMODIF,3,3,K(1,3) !K13 @ 3
…
RMODIF,3,12,K(1,12) !K(1,12) @12
…
RMODIF,3,78,K(12,12) !K(12,12) @78
03.29.2016
Unrestricted © Siemens AG 2016
Page 64 Siemens PLM Software
Solver Support
ANSYS & Abaqus CBUSH/PBUSH Input
• Element Damping:
ET,4,MATRIX27,0,0,5 !kopt1=0, positive definite/semi-positive
!kop2=0, symmetrical
!kop3=5, damping
ANSYS element type number, incremented automatically in Femap
• Element Damping Matrix:
78
7776
3324
231413
12321
m
y
s
R,4 !4=real constants number
RMODIF,4,1,B(1,1) !B11 @ 1
RMODIF,4,2,B(1,2) !B12 @ 2
RMODIF,4,3,B(1,3) !B13 @ 3
…
RMODIF,4,12,B(1,12) !B(1,12) @12
…
RMODIF,4,78,B(12,12) !B(12,12) @78
03.29.2016
Unrestricted © Siemens AG 2016
Page 68 Siemens PLM Software
Solver Support
ANSYS & Abaqus CBUSH/PBUSH Input
One CBUSH element verification
Set 1: NX Nastran Set 2: ANSYS Set 3: Abaqus
Results are same.
03.29.2016
Unrestricted © Siemens AG 2016
Page 71 Siemens PLM Software
Solver Support
ANSYS CBUSH/PBUSH Input
Transient analysis of a hinge verification
ANSYS stress
NX Nastran stress
03.29.2016
Unrestricted © Siemens AG 2016
Page 72 Siemens PLM Software
Solver Support
CBUSH Translation Notes
• For ANSYS:
PBUSH to MATRIX27. K and B to two elements, one for K, another for B.
SPRING/DAMPER to COMBI14.
“To Ground”: creating a dummy node and apply “D,dummyNode,ALL,ALL”.
• For Abaqus:
PBUSH to *MATRIX INPUT,… *MATRIX ASSEMBLE. K and B, two matrices.
Spring (K input) to SPRING2/A, Damper (B input) to DASHPOT2/A.
PBUSH to Ground, only top-left quarter (11) sub-matrix is written.
SPRING to Ground (K input) to SPRING1.
Damper to Ground (B input) to DASHPOT1.
*MATRIX INPUT,… *MATRIX ASSEMBLE not applicable to analysis other than
statics/mode, for other analysis, CBUSH is not translated and warning is issued.
03.29.2016
Unrestricted © Siemens AG 2016
Page 73 Siemens PLM Software
Solver Support
MATRIX27 input from Femap
Because PBUSH is translated to MATRIX27 of ANSYS and MATRIX27 is 12x12,
A 12x12 matrix (K,B,M) is added to Femap to handle its input from Femap
Accessed
here
Still keep 6x6 matrix input.
A switch to12x12.
Choice of K,B,M.
03.29.2016
Unrestricted © Siemens AG 2016
Page 74 Siemens PLM Software
Solver Support
MATRIX27 input from FEMAP
A switch to 6x6.
Choice of K,B,M.
Values filled after reading hindge.ans into Femap.
03.29.2016
Unrestricted © Siemens AG 2016
Page 75 Siemens PLM Software
Solver Support
Nonzero constraints in ANSYS
• Nonzero constraints were added in Femap 11.3
• Nonzero constraints are easily added to ANSYS as follows
• D,nodeID,dofID,value
• “D,nodeID,dofID,value” are read into Femap 11.3 and stored as a constraint
with nonzero value
03.29.2016
Unrestricted © Siemens AG 2016
Page 76 Siemens PLM Software
Femap 11.3
Overview
New functionality and updates
• Preprocessing
• Meshing
• Solver support
• Postprocessing
• Performance
03.29.2016
Unrestricted © Siemens AG 2016
Page 77 Siemens PLM Software
Postprocessing
Arrow Plots
Contour Vector plots have been completely overhauled for v11.3 and have been
renamed Contour Arrows
03.29.2016
Unrestricted © Siemens AG 2016
Page 78 Siemens PLM Software
Postprocessing
Contour Arrow Plots
Automatic vector selection: the user specifies a single contour vector and Femap
automatically selects appropriate output vectors to display as well as the correct
orientation for relevant elements
Individual output vector selection is still available for advanced users
03.29.2016
Unrestricted © Siemens AG 2016
Page 79 Siemens PLM Software
Postprocessing
Contour Arrow Plots
On-the-fly results transformations: nodal, shell and solid results can now be
displayed in a transformed orientation without having to first manually create a
set of transformed results
03.29.2016
Unrestricted © Siemens AG 2016
Page 80 Siemens PLM Software
Postprocessing
Contour Arrow Plots
Individual component display: display of individual components can be
selectively be turned on and off without having to reselect vectors
03.29.2016
Unrestricted © Siemens AG 2016
Page 81 Siemens PLM Software
Postprocessing
Contour Arrow Plots
Automatic styling: based on the selected output vector, Femap can automatically
select the arrow styles that are the most appropriate for the type of vector
displayed. These settings can always be overridden by the user
Arrow Heads
Arrow Location
Arrow Colors
Moment Head Double Head Single Head No Head
Arrow at Tail Arrow at Center
Contour Colors View Colors
03.29.2016
Unrestricted © Siemens AG 2016
Page 82 Siemens PLM Software
Postprocessing
Contour Arrow Plots
Automatic styling
Plate principals
• Double-headed arrows
• Located at center
Plate membrane
• Single-headed arrows
• Located at tip
• Designed to show
directions for positive
shear flow
Beam axial / shear
• Axial shown with
double-ended arrows at
center
• Shear shown with single
headed arrows at tip
03.29.2016
Unrestricted © Siemens AG 2016
Page 83 Siemens PLM Software
Postprocessing
Contour Arrow Plots
Shear / resultant display: arrows can be shown as individual components,
resultants or selected axial / shear components
Total output vectors (i.e. 1..Total
Translation) are automatically paired
with the matching components and
shown as resultants
Component output vectors (i.e. 2..T1
Translation) are automatically paired
with the matching components and
shown as individual components
03.29.2016
Unrestricted © Siemens AG 2016
Page 84 Siemens PLM Software
Postprocessing
Contour Arrow Plots
Shear / resultant display
CBUSH forces in the element
coordinate system shown as
individual components
CBUSH forces in the element
coordinate system shown as shear
(Y force / Z force) and axial (X force)
03.29.2016
Unrestricted © Siemens AG 2016
Page 85 Siemens PLM Software
Postprocessing
Contour Arrow Plots
Output listing: when doing automatic vector selection,
List / Output / Contoured Results to Data Table command lists Contour Arrow
results to the data table as they appear on screen
All results remain sortable and entities can be highlighted, even when resultants
or shears are displayed
03.29.2016
Unrestricted © Siemens AG 2016
Page 86 Siemens PLM Software
Postprocessing
Freebodies
Glue and contact: support has been added for glue and contact results as
discrete freebody contributions
For decks created outside Femap, requires
BCTRESULTS or BGRESULTS case
control (automatically included in Femap)
GPFO table still shows an imbalance in the
total nodal summation, so same result can
be achieved by including the reverse of the
nodal summation contribution
03.29.2016
Unrestricted © Siemens AG 2016
Page 87 Siemens PLM Software
Postprocessing
Freebodies
Linear contact model
between hex and tetra
mesh, fixed at the ends.
50# cantilever load
applied to tip of hex mesh
Deformed plot showing
linear contact
03.29.2016
Unrestricted © Siemens AG 2016
Page 88 Siemens PLM Software
Postprocessing
Freebodies
Freebody plot using
applied, SPC, and
peripheral element
contributions on nodes
and elements of hex
mesh. Applied load is not
balanced
Contact contribution has
been added – summation
is now in equilibrium
03.29.2016
Unrestricted © Siemens AG 2016
Page 89 Siemens PLM Software
Postprocessing
Freebodies
Freebody listing has been rewritten to consolidate commands and add additional
features
v11.2.2
v11.3
Single Dialog
03.29.2016
Unrestricted © Siemens AG 2016
Page 90 Siemens PLM Software
Postprocessing
Freebodies
Freebody listing
• Consolidated into a single
dialog box
• Interface loads can be sent
directly to the data table
• Clipboard is a new listing
destination option for tab
delimited data
• Listing of F06-style GPFO data
has been streamlined
• Dialog remembers previous
settings
03.29.2016
Unrestricted © Siemens AG 2016
Page 91 Siemens PLM Software
Postprocessing
Freebodies
Freebody listing: interface loads in data table
03.29.2016
Unrestricted © Siemens AG 2016
Page 92 Siemens PLM Software
Postprocessing
Freebodies
Freebody listing
• Choosing the clipboard output destination pastes tab delimited data to the
clipboard, similar to what is seen in the data table
• Convenient for pasting to Excel or similar applications
03.29.2016
Unrestricted © Siemens AG 2016
Page 93 Siemens PLM Software
Postprocessing
Freebodies
Freebody listing: F06-style GPFO data
03.29.2016
Unrestricted © Siemens AG 2016
Page 94 Siemens PLM Software
Postprocessing
Freebodies
Default settings: freebody defaults can be set in Preferences / Results tab
03.29.2016
Unrestricted © Siemens AG 2016
Page 95 Siemens PLM Software
Postprocessing
Charting Enhancements
Enhanced support for analysis studies
Specify individual studies for
Vector vs. Output Set and Vector
vs. Vector data series Quickly create new data series
directly from the Model Info Tree.
Can be added to existing charts or
new ones can be created
03.29.2016
Unrestricted © Siemens AG 2016
Page 96 Siemens PLM Software
Postprocessing
Data Surface Mapping and Miscellaneous
Customer requests
• New APIs to map locations into data surface in same model:
MapOutput:GetOutputDataSurface(ds_id)
MapOutput:MapOutputDataToLocation(count, vXYZ, vValXYZ, vIsValid)
vIsValid returns 0 if no data map found
• Fixed bug where data surface could become corrupted when using Data
Surface Editor
• Fixed filepath name bugs in Qman
• Validated license server functionality on CentOS v7
03.29.2016
Unrestricted © Siemens AG 2016
Page 97 Siemens PLM Software
Femap 11.3
Overview
New functionality and updates
• Preprocessing
• Meshing
• Solver support
• Postprocessing
• Performance
03.29.2016
Unrestricted © Siemens AG 2016
Page 98 Siemens PLM Software
Performance
Performance Improvements
Addressed specific customer issues:
• Nastran XDB Attach: composite element results – 60x
• Femap sets (API feSet object)
Accessed from your APIs and used internally in Femap are now 30x faster
adding and removing IDs
• Expanding pressure loads on shell elements attached to a surfaces 240x faster
03.29.2016
Unrestricted © Siemens AG 2016
Page 99 Siemens PLM Software
Performance
Performance Graphics (PG)
• Performance Graphics continues to evolve
• Rigid elements: RBE2, RBE3, and RSPLINE elements are now drawn with PG,
including their DOF labels, independent/dependent symbols and arrows
indicating direction
• Contour Style: arrows are now drawn in PG, together with their numerical data
• Deformed Style: arrows are now drawn in PG, together with their numerical
data
• Performance Graphics will be temporarily disabled when an unsupported
command is used (i.e., Dynamic Cutting Plane, Dynamic IsoSurface, etc), then
be enabled again after exiting the command