february11

FEBRUARY 2011

DRAG SPECIALTIESFaster, easier and less expensive than a full-blown custom paint job our Drag Specialties Windshields and custom-matched Side Deflectors are a great way to give a bike a brand new look without breaking the bank. They feature high-quality construction and we add new designs often to reflect the latest style trends in the marketplace. Be sure to show your riders the latest looks.

PART # DESCRIPTION SUG. RETAILFOR 98-11 FLTR2310-0336 6” Firefighter $109.952310-0349 6” Warrior 109.952310-0350 6” Offset graffiti 109.952310-0351 6” Offset skull 109.95

PART # DESCRIPTION SUG. RETAILFOR 96-11 FLHT/FLHX AND H-D FL TRIKES2310-0338 6” Firefighter $99.952310-0355 6” Warrior 99.952310-0356 6” Offset graffiti 99.952310-0357 6” Offset skull 99.95

PART # DESCRIPTION SUG. RETAILFOR 96-11 FLHT/FLHX AND H-D FL TRIKES (CONT)2310-0337 8” Firefighter $99.952310-0352 8” Warrior 99.952310-0353 8” Offset graffiti 99.952310-0354 8” Offset skull 99.95

WINDSCREENS•True OEM-quality, direct-replacement windscreens•Extremely tough and custom-molded from premium Lexan® polycarbonate with FMR hard coating; the universally accepted material choice of the OEM motorcycle industry

•Will not fade, scratch or peel; available in many distinct styles•Twenty times the impact-resistance and abrasion-resistance as acrylic (Lucite®)•Give your bike an instant attitude adjustment with these 6”/8” versions•Made in the U.S.A.

2310-0338

2310-0352 2310-0353

2310-0354

PART # DESCRIPTION SUG. RETAIL0640-0526 Radius stem w/ short (31/2”) and long (41/2”) length $99.950640-0527 Slot stem w/ 5” length 99.95

PART # DESCRIPTION SUG. RETAIL0640-0528 Slayer stem w/ 53/4” length $99.950640-0529 Flame stem w/ 53/4” length 99.95

TOURING OVAL MIRRORS•Die-cast construction with a polished and chrome-plated finish•Convex glass reflector gives a great view of traffic behind you•Mirror head measures 51/4” x 31/4”•Sold in pairs

0640-0526

0640-0527

0640-0528 0640-0529

2

LACED WHEEL ASSEMBLIES•High-quality American-made wheel assemblies•Billet chromed custom aluminum hubs•Chrome-plated steel rims in 40-, 60- or 80-spoke styles•Polished stainless steel spokes with custom smooth nipples

•Bearings, seals and center spacer are included•DOT-approved and trued to less than .005” runout•All wheels use a center metal valve stem tube•Made in the U.S.A.

DESCRIPTION 40 SPOKE SUG. RETAIL 60 SPOKE SUG. RETAIL 80 SPOKE SUG. RETAILFRONT WHEELS21x3.5” for 08-11 FLHT/FLHR/FLHX/FLTR w/ ABS 0203-0404 $750.95 0203-0406 $792.95 0203-0407 $906.95REAR WHEELS18x5.5” for 09-11 FLHT/FLHR/FLHX/FLTR w/ ABS 0204-03641 963.95 0204-03661 1,001.95 0204-03671 1,026.951 These wheels require special pulleys PART #1201-0580 and #1201-0581. See 2011 FatBook.

60 Spoke Front40 Spoke Front 80 Spoke Front

FAT DADDY 50-SPOKE RADIALLY LACED WHEELS•Wheels feature radially laced (straight) 3/8” stainless steel spokes with custom nipples, billet chromed aluminum or black aluminum custom hubs and polished chrome or black steel rims

•Wheels come sealed so that tubeless tires can be used; valve stems sold separately•5.5” wheels will fit most applications by modifying the axle spacers and changing the rotor and pulley spacing; frame, swingarm modification, and fender change along with a narrower belt may also be required

•Made in the U.S.A.

NOTE: It is the installer’s responsibility to determine the required changes.

PART # DESCRIPTIONSUG.

RETAILDUAL DISC FRONT WHEELS0203-0401 16” x 3.5” for 08-11 FLHT, FLHR, FLTR, FLHX (w/ ABS), chrome $860.950203-0403 18” x 3.5” for 08-11 FLHT/FLHR/FLHX/FLTR (w/ ABS), chrome 897.950203-0405 21” x 3.5” for 08-11 FLHT/FLHR/FLHX/FLTR (w/ ABS), chrome 1,020.950203-0402 21” x 3.5” for 08-11 FLHT/FLHR/FLHX/FLTR (w/ ABS), black 1,116.95


RETAILREAR WHEELS0204-03651 18” x 5.5” for 09-11 FLHT/FLHR/FLHX/FLTR (w/ ABS), chrome $1,059.950204-03681 18” x 5.5” for 09-11 FLHT/FLHR/FLHX/FLTR (w/ ABS), black 1,154.951 Must use Drag Specialties pulley PART #1201-0580 or 1201-0581.

PART # DESCRIPTION SUG. RETAILFRONT APPLICATIONS; REPL. BEARING OEM #E 0004.02A8A0215-0640 For 03-06 Firebolt XB9R $11.950215-0640 For 03-09 Lightning XB9S 11.950215-0640 For 08-09 1125CR/R 11.950215-0640 For 05-08 Firebolt XB12R 11.950215-0640 For 05-09 Lightning XB12S 11.950215-0640 For 06-09 Ulysses XB12X 11.95REAR APPLICATIONS; REPL. BEARING OEM #E 0005.02A8A (UNLESS NOTED)0215-0639 For 00-09 Blast (repl. bearing OEM #E6204) 14.950215-0638 For 03-06 Firebolt XB9R 28.950215-0638 For 03-09 Lightning XB9S 28.950215-0638 For 08-09 1125CR/R 28.950215-0638 For 05-08 Firebolt XB12R 28.950215-0638 For 05-09 Lightning XB12S 28.950215-0638 For 06-09 Ulysses XB12X 28.95

WHEEL BEARING KITS•Kits contain all necessary bearings required for each individual wheel application

•Bearings are premium EMQ quality featuring low-drag, double-lip rubber seals that keep water out and improve grease retention

NOTE: Follow OEM-prescribed procedures for installing and checking wheel bearing end play.

PART # DESCRIPTION SUG. RETAIL0403-0042 For 06-11 Dyna Glide models (49mm fork legs) $65.950403-0041 For 91-05 FXD, 87-11 XL, 87-94 FXR models

(39mm fork legs) 59.95

FORK LEG ASSEMBLY REBUILD KITS•Complete kits, include all parts needed to rebuild one set of front fork leg assemblies

•Available for 41mm and 39mm applications

0403-0041

0403-0042

PART # DESCRIPTION SUG. RETAIL0705-0099 Rebuild kit $9.95

PETCOCK REBUILD KIT•Kit includes one bronze screen, one stainless steel screen, one viton seal, one spring washer and one gasket

•Fits Drag Specialties petcock PART #s DS-390216/217, DS-390218/219 and 0705-0002/0003/0004

•Kit contains components for several different styles of petcock; all components may not be used in every style

3

PROGRAMMABLE MINI ELECTRONIC SPEEDOMETER WITH ODOMETER/TRIPMETER•Can be calibrated to read accurately on most bikes with a pulse-generating speed sensor

•Programmable with any sending unit that sends 3,000 to 90,000 pulses per mile

•Compatible with all 95-03 OEM sensors and most aftermarket sensors

•Polished diameter stainless steel housing with a black or white face•Features a 12V LED backlit display•Digital odometer has two resettable trip meters•Remote single-button switch allows easy changing between odometer and trip meter

•Matching tachometers sold separately; see the 2011 FatBook

2210-01752210-01742210-0173

PART # DESCRIPTION SUG. RETAIL1.187” DIAMETER2210-0173 White face $129.952210-0172 Black face 129.952.4” DIAMETER2210-0174 Black face 129.952210-0175 White face 129.95

CHROME FRONT AXLE CAPS•Die-cast aluminum construction•Held in place by setscrews•Sold in pairs

PART # DESCRIPTION SUG. RETAIL0214-0374 For 08-11 FLHT/FLHR/FLTR/FLHX/H-D FL Trike,

08-11 FXD/FXDWG, 07-11 FXST/FLST, 08-11 XL $21.95

CHROME KICKSTAND SPRINGS•Springs are measured from hook to hook•Sold each

PART # DESCRIPTION SUG. RETAIL0510-0182 For 02-11 FXD/FXDWG; repl. OEM #50057-02 (3.4”) $6.950510-0183 For 91-01 FXD/FXDWG; repl. OEM #50057-91 (3.4”) 4.950510-0184 For 07-11 FXST/FLST/FXCW/FXCWC;

repl. OEM #49725-07 (4.1”) 4.950510-0187 For 99-06 FLT, FLHT (3.94”) 4.95

0510-0182 0510-01830510-0184

0510-0187

EXHAUST HEAT WRAP KITS•Fiberglass cloth for extreme heat insulation (2,000°)•Perfect for wrapping pipes or mufflers•Keeps the heat inside•Come in 1” or 2” wide x 25’ rolls•Includes four 14” locking stainless steel ties; replacement ties sold separately (PART #1861-0670)

•Available in black or tan•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1861-0666 1” tan $31.951861-0667 1” black 31.951861-0668 2” tan 44.951861-0669 2” black 44.95

1861-0666

1861-0667

1861-0668

1861-0669

STAINLESS STEEL WORM CLAMPS•Feature a narrow design with a low profile head

•Secures exhaust heat wraps or can be used any place extra clamping is needed in extreme temps or conditions

•Come in two sizes•Sold in packs of four•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1861-0672 1.25”-2.25” diameter $13.951861-0673 2.25”-3.25” diameter 13.95

1861-06721861-0673

STAINLESS STEEL CABLE TIES•Great for high-temperature areas•Ball bearing and barb fastening assembly

•Locks tightly and will not slip•Secure any place an extra strength tie is needed

•Come in 8” or 14” lengths•Sold in pack of five•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1861-0671 8” $9.951861-0670 14” 11.95

1861-0671

1861-0670

4

11/4” ENGINE GUARD FOOTPEG MOUNTS•Chrome-plated, CNC-machined billet aluminum mounts clamp onto any 11/4” engine guard

•Clamp design offers superior strength and stability; mounts will not slip even under full body weight

•6” arms have a full 360° range of motion to work with any leg length; lock into position using an internal locking pin

•Accept bolt-on folding pegs with up to 3/8” mounting bolt; pegs not included and must be purchased separately

•Stainless steel hardware and mounting instructions included•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0809 11/4” engine guard footpeg mounts $135.95

HIGHWAY PEGS WITH FRAME MOUNTS•Chrome-plated, CNC-machined billet aluminum pegs and mounts clamp to 11/8”, 11/4” or 11/2” frame down tubes

•Adjust 8” forward and back to accommodate any leg length or riding position

•Anti-vibration pegs feature 3/8” mounting bolts and unique locking set screw system that lets the rider set the peg angle

•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0822 For 11/8” frames $159.951620-0807 For 11/4” frames 159.951620-0808 For 11/2” frames 159.95

1620-0807

ANTI-VIBRATION FOLDING HIGHWAY PEGS•Steel and aluminum construction with chrome plating•Available with or without 5” L heel rest•Unique locking set screw system allows rider to adjust the peg angle•3/8” mounting bolts work with Rivco and most other mounts•Stainless steel hardware included•Sold in pairs•Optional peg extensions available separately in pairs; see 2011 FatBook

PART # DESCRIPTION SUG. RETAIL1620-0810 Highway pegs $44.951620-0811 Highway pegs w/ heel rest 74.95

1620-0810

1620-0811

PART # DESCRIPTION SUG. RETAILFOR 80-11 FLT, FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKES1621-0253 Chrome $392.951621-0254 Black 392.95

EXTENDED LENGTH BANANA BOARDS•Bowed floorboards feature machined billet construction, chrome-plated finish with black rubber inserts and bright finish rivets

•Extended length (203/4”) allows the foot to rest beyond the shifter and brake pedals

•Optional banana shifter peg and matching rear board covers are also available separately

•Sold in pairs•Made in the U.S.A.

1621-0253

1621-0254

5

JAGGJagg is a family-owned and family-operated business that has been a part of our own Drag Specialties family almost from the start. As the First Name In Engine Cooling, their products provide your customers with parts and accessories that keep their bikes running stronger and longer through reduced operating temperatures. All the custom parts and accessories in the world don’t mean a thing on ride that has run out of life. Keep them rollin’ and showin’ with Jagg.

OIL COOLERSINSTALLATION TIME MEASURED IN MINUTESEXTRA RIDING TIME MEASURED IN YEARS•Cooler oil makes engines last longer – simple as that!•Jagg oil coolers feature cutting-edge technology to keep your engine cool under the most punishing conditions

•And because they’re designed to look as good as they perform, they’ll perfectly complement your bike’s style

•Hoses and clamps are included with oil cooler kits

ENGINEERED TO PERFORM•Multipass oil flow configuration ensures the oil’s utilization of the entire oil cooler•Specially designed turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation surface area for superior cooling with minimal oil pressure restriction

•Highly concentrated mini-louvered air fins allow maximum heat transfer•Made in the U.S.A.

NOTE: Vertical oil coolers do not fit touring models with lower fairings.

NOTE: Ten-row coolers are recommended for 95” and larger motors.

NOTE: Twin Cam models will require the use of oil filter adapter PART #J4600 or 0713-0031 to access oil supply.

DESCRIPTION PART # SUG. RETAIL10-ROW INLINE VERTICAL-MOUNT OIL COOLERS (CHROME)For 00-11 FXST/FLST 0713-0058 $279.95For 84-11 FLHT/FLHR/FLTR (except H-D FL Trike) 0713-0059 279.95

DESCRIPTION PART # SUG. RETAIL10-ROW LOW-MOUNT HORIZONTAL OIL COOLER (CHROME)For 91-11 FXD/FXDWG 0713-0065 $279.956-ROW HIGH-MOUNT HORIZONTAL OIL COOLER (BLACK)For 96-02 Buell J1390 279.95

0713-0058 0713-00590713-0065

J1390

6

LINDBY CUSTOM, INC.When it comes to engine guard, highway bar and peg combinations, nobody does it better than these folks. Per Lindby and his wife Anne pride themselves in the design and manufacture of bars that feature superior function and un-matched style that you will find on everything from the finest customs to stock replacement applications. For riders who are looking for more than just a “crash bar”, Lindby is clearly the best choice for quality and style.

PART # DESCRIPTION SUG. RETAILCHROME0505-0910 For 00-11 FXST/FLST models $179.950505-09081 For 97-11 FLHT, FLHR, FLTR, FLHX and

H-D FL Trike models 179.950505-0912 For 04-11 XL models 179.95

PART # DESCRIPTION SUG. RETAILBLACK0505-0911 For 00-11 FXST/FLST models $179.950505-09091 For 97-11 FLHT, FLHR, FLTR, FLHX and

H-D FL Trike models 179.950505-0913 For 04-11 XL models 179.951 Will not fit w/ fairing lowers.

UNIBAR®•Traditional OEM-style highway bars•Made from high-quality 11/4” high-tensile steel tubing•Easy installation with included hardware•Available in triple-chrome-plated and black powder-coat finish

NOTE: Not recommended for use with extended forward controls or extended floorboards.

0505-0908

0505-0909

0505-0910

0505-0912

0505-0913

7

11/4” STRIP HANDLEBARS•11/4” handlebars with 11/4” clamping area•Polished welds•Slotted for internal wiring•Offer a clean line of sight to the stock mirrors•Made in the U.S.A.

PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK SUG. RETAILFOR 08-11 FXDF, 10-11 FXDWG MODELS0601-1536 Chrome 17” 35.5” 9” 5” $285.950601-1539 Chrome 12” 32” 9” 5” 285.950601-1537 Gloss black 17” 35.5” 9” 5” 285.950601-1540 Gloss black 12” 32” 9” 5” 285.950601-1538 Flat black 17” 35.5” 9” 5” 285.950601-1541 Flat black 12” 32” 9” 5” 285.95

0601-1536

0601-1537

0601-1539

READY-TO-INSTALL EXTENSION HARNESSES•All the items needed to successfully extend the wiring on Softail handlebar switches or FL Trike reverse control

•Kits come complete with pre-terminated wires, heat shrink and installation instructions

•Available in 4”, 8”, 12” and 15” lengths•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILHANDLEBAR SWITCH WIRING EXTENSIONS FOR 11 FLST2120-0367 +4” $32.952120-0368 +8” 34.952120-0369 +12” 35.952120-0370 +15” 37.95REVERSE WIRING EXTENSIONS FOR H-D FL TRIKES2120-0377 +4” 21.952120-0378 +8” 22.952120-0379 +12” 23.952120-0380 +15” 24.95

2120-0367

2120-0377

11/4” BURLY BARS•All-chrome bars feature a new tapered technology in the hand control area allowing the customer the freedom to use OEM or aftermarket controls (including hydraulic clutch controls)

•Dimpled and drilled for internal wiring•Have knurled centers (31/2” O.C.)•Made in the U.S.A.

NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.

PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK SUG. RETAILSTANDARD0601-1579 Gorilla ape, chrome 12” 36.5” 14” 8.75” $187.95


RETAILFOR 07-11 FLST/C/F/N0610-0479 14” $199.950610-0483 16” 199.950610-0487 18” 199.95FOR 00-06 FLST/C/F/N0610-0478 14” 199.950610-0482 16” 199.950610-0486 18” 199.95FOR 07-10 FXST/B/D0610-0481 14” 199.950610-0485 16” 199.950610-0489 18” 199.95FOR 00-06 FXST/B/D0610-0480 14” 199.950610-0484 16” 199.950610-0488 18” 199.95


RETAILFOR 08-11 FLHX, FLHT/C/U AND H-D FL TRIKES W/ OUT ABS0610-0490 13” $319.95FOR 07-11 FXD0610-0493 12” 199.950610-0496 14” 199.950610-0499 16” 199.95FOR 06 FXD0610-0492 12” 199.950610-0495 14” 199.950610-0498 16” 199.95FOR 98-05 FXD0610-0491 12” 199.950610-0494 14” 199.950610-0497 16” 199.95

HANDLEBAR INSTALLATION KITS•Complete installation kit for 12”, 14”, 16” and 18” Burly Ape hangers

•Kits include black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring

•Kits for FL models include black braided steel brake line, extended clutch cable and wiring for main harness, radio and CB use stock throttle-by-wire harness

•For use with 2” risers•Made in the U.S.A.

0601-1541

MAGNUMScott Hurwitz (center) and his team are the folks that bring you their Build Your Own “BYO” brake line kits. With a minimum amount of inventory required, “BYO” components let you provide almost every rider with DOT-approved brake lines that look great, fit perfectly and perform flawlessly in their particular application. It is a quick and easy way for you to be the expert riders turn to when they require custom or replacement lines for any reason.

8

PART # DESCRIPTION SUG. RETAIL1742-0332 3’ coated (-3) black steel brake line w/vice wrench $15.951742-0333 6’ coated (-3) black steel brake line w/vice wrench 24.951742-0334 12’ coated (-3) black steel brake line

w/vice wrench 46.951741-3042 25’ coated (-3) black steel brake line

w/vice wrench 87.951742-0320 3/8” / 10 mm 35° black chrome banjo

w/stainless fittings 14.951742-0321 3/8” / 10mm 60° black chrome banjo w/

stainless fittings 14.951742-0322 3/8” / 10mm 90° black chrome banjo w/

stainless fittings 14.951742-0319 3/8” / 10mm 180° black chrome banjo w/

stainless fittings 14.95

PART # DESCRIPTION SUG. RETAIL1742-0324 12mm 35° black chrome banjo w/stainless fittings $14.951742-0325 12mm 90° black chrome banjo w/stainless fittings 14.951742-0323 12mm 180° black chrome banjo w/

stainless fittings 14.951742-0327 7/16” 35° black chrome banjo w/stainless fittings 14.951742-0328 7/16” 90° black chrome banjo w/stainless fittings 14.951742-0326 7/16” 180° black chrome banjo w/stainless fittings 14.951742-0329 Black chrome brake tee for 91-11 Dyna,

86-03 XL (Narrow Glide) 55.951742-0330 Black chrome brake tee for 84-07 FLT, FLHT, FLHR,

FLTR, FLHX (non ABS) 55.951742-0331 Black chrome brake tee for 08-11 FLHT, FLHR,

FLTR, FLHX, H-D FL Trike (non ABS) 55.953808-0008 Banjo/fitting vice wrench 5.95

BLACK STAINLESS STEEL BRAKE LINES AND COMPONENTS

BLACK UNIVERSAL BUILD YOUR OWN (BYO) DOT BRAKE LINES•Meets all Department of Transportation (DOT) FMVSS-106 standards once assembled for safe and reliable on-road use

•Assembles simply and quickly in a few minutes with side cutters and 7/16” wrench•Simply choose correct banjo fittings and cut line to the correct length, eliminating all ordering guesswork

•Brake hose and fittings are 100% pressure tested and inspected•-3 braided black stainless brake line coated with opaque black PVC cover; banjos are black chrome-plated and include black vinyl heat shrink to cover stainless steel fitting once assembled

•Bulk brake lines are sold in multiple lengths and include one vice wrench•Patent pending

NOTE: All (BYO) Build Your Own fittings and bulk hoses meet Department of Transportation (DOT) FMVSS-106 standards ONLY when used SOLELY in conjunction with each other. Please see the 2011 Fatbook for compatible Drag Specialties banjo bolts and crush washers.

STEP 1 STEP 2

STEP 3 STEP 4

CUT TO LENGTH PUSH INTO FITTING

SCREW INTO BANJO THREAD TOGETHER

1742-0323

1742-0333

3808-00081742-0320

1742-0321

1742-0319

1742-0324

1742-0325

1742-0328

1742-0326

1742-0327

1742-0329

1742-0322

9

LTR108-B AIR SUSPENSION•Designed for ride quality; no bottoming-out under any load condition•Exclusive Gates™ Kevlar® air spring technology•Spherical bearings in shocks eliminate shock binding•Deflective disc dampening offers a smooth ride and eliminates annoying pogo•Suspension system installs in stock location; no modifications necessary•Color-coded plug-and-play wiring for quick and easy installation•System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability•Optional fairing mounted gauges (PART #s 2212-0179 and 2212-0289) also available separately, see Drag Specialties 2011 FatBook•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1311-0099 For 08-11 Lehman Touring Trikes and 10-11 FLHTCUTG/FLHXXX $1,599.95

FRONT BRAKE ROTORS•Unique low carbon rotors feature polished chrome carriers•Provide better braking, improved brake alignment, no rotor distortion, reduced chance of rotor cracking and stylish looks•Bolt-on design with no modifications and utilize standard H-D calipers•All rotors sold each

DESCRIPTION LEfT fRONT PART # SUG. RETAIL RIGHT fRONT PART # SUG. RETAILFor 06-11 FXD/FXDC/FXDL (cast wheel) 1710-1215 $185.95 - -For 06-11 FXD/FXDB/FXDC/FXDL (spoke wheel) 1710-1216 232.95 - -For 08-11 FXDF (cast wheel) 1710-1216 232.95 - -For 06-08 FXDWG/10-11 FXDWG (spoke wheel) 1710-1216 232.95 - -For 06-11 V-Rod 1710-1215 185.95 1710-1215 $185.95

INDUCTIVE RPM SENSOR•Suitable for connecting tachometers, nitrous systems or anytime a tach signal is required•Does not require any cutting or splicing into the factory wiring harness, for the safest possible installation

•Simple three-wire installation•Compatible with 04-11 carbureted and EFI engines

PART # DESCRIPTION SUG. RETAIL2211-0030 Inductive RPM sensor $74.95

PART # DESCRIPTION SUG. RETAILFOR 36-47 KNUCKLEHEAD, 48-64 PANHEAD2111-0176 W/ standard regulator $313.95

PART # DESCRIPTION SUG. RETAILFOR 36-47 KNUCKLEHEAD, 48-64 PANHEAD (CONT)2111-0177 W/ low volt regulator $429.95

6V VARIABLE AMPERAGE GENERATORS WITH BUILT-IN REGULATOR•Feature the unique concept of a built-in regulator and a simple two-wire hookup

•Regulators have variable amperage output, producing more amps when cold for faster charging•All parts are interchangeable with OEM (except end cap/regulator)•Available in black with a standard voltage or low voltage regulator (for bikes that are running a battery in a wraparound oil tank)


2111-0177

10

RUSS WERNIMONT DESIGNSHere’s a guy who before too long will have 30 years of custom metal fabrication experience backing-up his eye-for-design and attention-to-detail. Whether Russ is riding, racing or working on his latest concept, he’ll tell you that it is the little things that can make a big difference. For attention-grabbing high-quality parts, large or small, turn to our vast selection from RWD.

LED CAT-EYE LIGHTS•Mount to flat surfaces and come with gaskets•LED design; have brake, running and turn signal capabilities•Feature chrome bezel; measure 63/4” L x 25/8” H x 1” D•Use OEM plugs/connectors or can be spliced into existing wiring harness•Sold in pairs

PART # DESCRIPTION SUG. RETAIL2010-0165 LED Cat-Eye lights $139.95

PART # DESCRIPTION SUG. RETAILFOR 84-11 SOFTAIL AND 84-11 FLT/FLHT MODELS (EXCEPT H-D FL TRIKE)0214-0451 Smooth $82.950214-0452 Diamond 82.95

LOWER LEG AND AXLE COVERS•Not only cover the axle, but also cover the lower portion of the leg to clean up and improve the look of your stock lower legs

•Hides all exposed axle mounting hardware•Cast aluminum, chrome finish•Fits stock lower fork legs•Diamond dimensions are 21/2” D x 23/4” W x 4” H; smooth dimensions are 2” D x 23/4” W x 4” H

0214-0451 0214-0452

11

JMCB-2003B HANDLEBAR-MOUNTED CB AUDIO SYSTEMS•Features a 40-channel CB radio, NOAA weather band, rider/passenger intercom and stereo music amplification from any portable-type music device

•New harness design for future J&M Bluetooth capability•Mount it to your left handlebar with the proper bracket kit, connect the headset/power harness to your bike’s electrical system (choose below between solo or rider/passenger kits), install a J&M license-plate mounted CB antenna or any other properly tuned CB antenna (sold separately), plug in your favorite J&M dual-mode helmet headset/headsets and you are ready to go

•There are no other hidden black boxes to mount or clutter up your bike, as the complete system is on your handlebar (your portable music device is plugged into the system as a separate item)

•All knobs and controls have been designed for ease of use while riding, even with gloves on, and in addition the unit is water-resistant so you won’t have to worry about getting caught out in the rain

•Audio performance is superb, even at high speeds, and that is most impressive considering its compact size•Mounting bracket and lower-section hook-up cord sold separately•Made in the U.S.A.

NOTE: The JMCB-2003B is a J&M 6-pin audio system that requires the pre-amplified microphone signal provided by our Dual Mode (ECD/ICD/BCD prefixed) helmet headsets along with the lower section hook-up cord PART # 4403-0053 or 4402-0047.

PART # DESCRIPTION SUG. RETAIL4402-0177 JMCB-2003B kit for driver/passenger

headset operation $399.954402-0178 JMCB-2003B kit for solo (driver only)

headset operation 339.95

PART # DESCRIPTION SUG. RETAIL4402-0008 Mount bracket for Harleys, black $46.954403-0017 Mount bracket for Harleys, polished 46.954403-0053 Lower cord for PART #4402-0177 69.954402-0047 Lower cord for PART #4402-0178 24.95

4402-0177

4402-0178

4402-0008

CHROME MINI-BEAST III AND IV AIR HORNS•Self-contained air horns fit most H-D motorcycles (except V-Rod, Heritage Springer and Sportsters)

•Features an oval cover made from 18-gauge steel and a heavy-gauge steel mounting bracket

•Plug-n-play wiring harness for easy installation•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2107-0079 Mini-Beast III Twin Cam 88 style air horn

(measures 9” L x 51/2” H x 35/8” D) $189.95

PART # DESCRIPTION SUG. RETAIL2107-0078 Mini-Beast IV Twin Cam 96 style air horn

(measures 9” L x 51/8” H x 35/8” D) $189.95

2107-0078

2107-0079

PART # DESCRIPTION SUG. RETAIL1861-0700 For Twin Slash Ovals 41/2” mufflers

PART #1801-0391 $21.95

OPTIONAL QUIET INSERT•Reduces the exhaust tone to a neighborhood-friendly level•Sold each•Made in the U.S.A.

12FEBRUARY 2011 | 9901-1012

124” HOT SET-UP KIT FOR USE WITH STOCK OR S&S CYLINDER HEADS•The S&S Hot Set Up kit for Twin Cams allows a Twin Cam owner to convert a stock 88” engine to 124” using the stock crankcases

•Include 41/8” bore cylinders and forged dished pistons, an S&S 45/8” stroke flywheel assembly, a set of S&S .640” lift chain-drive Easy Start cams, tappets, S&S Quickee Adjust pushrods, roller rocker arms, and all hardware, gaskets and instructions

•10.4:1 compression ratio with stock cylinder heads; 10.2:1 compression ratio with S&S 89cc heads (PART #s 0930-0006 or 0930-0068, sold separately)

•Fuel system is not included and must be ordered separately (see 2011 FatBook)


NOTE: This project requires a skilled technician. It is the responsibility of the person assembling the parts to check all clearances and assembly specifications.

0903-0812

PART # DESCRIPTION SUG. RETAILFOR 92-99 EVOLUTION-STYLE BIG TWINS0920-0063 Standard bore case $1,236.950920-0064 Big bore case 1,236.95

SUPER STOCK™ ENGINE CASES•Cast from A356 T-6 heat-treated aluminum alloy•Cases are available for 31/2” stock and 35/8” big bore applications with strokes up to and including 5” and accept stock flywheel assemblies

•Machined to accept a 92-99 Evolution oil filter assembly that mounts on the front of stock motor cases

•All races are line-honed and breather cavity is precision-machined to optimize breather timing for maximum oil scavenging

•Additional parts include crankcase bolts, washers and nuts, cylinder mounting studs, timing hole plug, magnetic drain plug, assorted breather and oil line fittings, oil pressure switch, oil screen, spring and plug, sprocket shaft Timken® bearing assembly and oil seal, pinion shaft main bearing race, cam needle bearing assembly, oil pump drive shaft bushing and installation instructions

•Machined for EFI applications•Black powder-coat finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 99-06 TWIN CAM 88A (EXCEPT 06 DYNA)0903-0812 Black powder-coat $3,595.95

PART # DESCRIPTION SUG. RETAILFOR 99-06 TWIN CAM 88A (EXCEPT 06 DYNA) (CONT)0903-0813 Silver powder-coat $3,595.95

0920-0063

MOTOR SPROCKET SHAFT ASSEMBLIES•All assemblies include tapered shaft, nut and keys•For use with standard bearing diameter•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0921-0221 For 70-99 Big Twin (except Twin Cam) $101.950921-0222 For 66-69 Big Twin 124.95

PART # DESCRIPTION SUG. RETAIL0921-0223 For 55-64 Big Twin $124.95

0921-0221

0921-0223

february11

Documents

Transcript of february11