False Celing

8/8/2019 False Celing

1/7


2/7


3/7


4/7


5/7

HUNTER DOUGLAS

HUNTER DOUGLAS (I) PVT. LTD.

407/408, Sangeet Plaza,Opp. Marol Fire Brigade, Marol Maroshi Road,Andheri (E), Mumbai 400 059.Tel Nos. : 022 8521576/8599565/8523870Fax : 022 8513543E. mail : mumbai @hdindia.com

SHORT FORM SPECIFICATION

LUXALON Aluminium un-perforated - 84C Ceiling System:Providing and fixing Luxalon un-perforated corrosion resistant Aluminium

Magnesium alloy metal Panel Ceiling system of approved colour consisting of Panel84 mm wide X 12.5 mm deep X 0.5 mm thick with square edges and recess flange of

24 mm, panel length upto 6 mtrs, Coil Coated on a Continuous Paint Line. Double

baked and roll formed from doubled baked enamelled corrosion resistance AluminiumMagnesium alloy AA5050 for higher strength and good roll forming characteristics.

Panel shall be clipped to a baked enamelled aluminium panel carrier of 62 mm wide x

29mm deep x 0.95 mm thick in standard length of 5 mtrs. made of double bakedenamelled aluminium magnesium alloy AA5050 black with cut outs to hold the panels

module of 100mm (width of gap 16 mm closed) and at the distance 1.6 mtrs. with

Insulation and 1.8 mtrs without Insulation. The Carrier shall be suspended by means ofG.I. suspension rod 4-mm diameter and Galvanised suspension spring clip at a

distance of 1.3 mtrs c/c.

Paint finish: Aluminium Panels shall be chromatised for maximum bond betweenmetal and paint enamelled twice under high temperature, one side with full primer and

finish coat, the other side (inner side) with a primer coating and skin coat on aContinuous Paint Line.

Mode of Measurements:: Measurements shall be wall to wall without any deductionsfor lights, diffusers, columns etc.


6/7

HUNTER DOUGLAS




LUXALON Aluminium, perforated (2 mm), 84C Ceiling System:Providing and fixing Luxalon 84C perforated Aluminium panel of hole 2 mm diameter

and 5 mm centre to centre, apertures represents 15% perforated area, Ceilingmanufactured by M/s Hunter Douglas India Pvt. Ltd. approved colour consisting of

Panel 84 mm wide X 12.5 mm deep X 0.5 mm thick with square edges and recess

flange of 24 mm, panel length upto 6 mtr, Coil Coated on a Continuous Paint Line,

Double baked and roll formed from enamelled corrosion resistance aluminium alloyAA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel shall

be clipped to a baked enamelled aluminium panel carrier of 62 mm wide x 29 mm

deep X 0.95 mm thick in standard length of 5 mtrs., made of doubled enamelledaluminium alloy AA 5050 (Al. Mg) black with cut outs to hold the panels in a module

of 100 mm (width of gap 16 mm closed) and at the distance of 1.6 mtrs withInsulation and 1.8 mtrs without Insulation. The Carrier shall be suspended by meansof G.I. suspension rod 4-mm diameter and Galvanised suspension spring clip at a

distance of 1.3 mtrs c/c.

Paint finish: Aluminium panels shall be chromatised for maximum bond betweenmetal and paint enamelled twice under high temperature, one side with full primer and

finish coat, the other side (inner side) with a primer coating and skin coat on aContinuous Paint Line.

Acoustic Felt(Optional): Non-woven felt made of glass-reinforced fibre glued over theperforation for sound absorption.

Mode of Measurements: Measurements shall be wall to wall without any deductionsfor lights, diffusers, columns etc.


7/7

HUNTER DOUGLAS




LUXALON Aluminium, perforated (1mm), 84C Ceiling System:Providing and fixing Luxalon 84C perforated Aluminium panel of hole 1mm diameterand 2mm centre to centre apertures represent 22% perforated areaa, Ceilingmanufactured by M/s Hunter Douglas India Pvt. Ltd. of approved colour consisting of

Panel 84 mm wide X 12.5 mm deep X 0.5 mm thick with square edges and recess

flange of 24mm, panel length upto 6 mtrs, Coil Coated on a Continuous Paint Line,

Double baked and roll formed from enamelled corrosion resistance aluminium alloyAA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel

shall be clipped to a baked enamelled aluminium panel carrier of 62 mm wide x 29

mm deep x 0.95 mm thick in standard length of 5 mtrs., made of doubled bakedenamelled aluminium alloy AA 5050 (Al. Mg) black with cut outs to hold the panels in

a module of 100 mm (width of gap 16 mm closed) and at the distance 1.6 mtrs withInsulation and 1.8 mtrs without Insulation. The Carrier shall be suspended by meansof G.I. suspension rod 4 mm diameter and a Galvanised suspension spring clip at a

distance of 1.3 mtrs centre to centre.

Paint Finish: Aluminium panels shall be chromatised for maximum bond betweenmetal and paint, enamelled twice under high temperature, one side with a full primer

and finish coat, the other side (inner side) with a primer coating and Skin Coat on aContinuous Paint Line.

Acoustic Felt(Optional): Non-woven felt made of glass-reinforced fibre glued over theperforation for sound absorption.

Mode of Measurements: Measurements shall be wall to wall without any deductionsfor lights, diffusers, columns etc.

False Celing

Documents

Transcript of False Celing