ENCON THERMAL ENGINEERS …Answer to the Continued Need for Energy Conservation.
-
Upload
kaiya-dean -
Category
Documents
-
view
217 -
download
0
Transcript of ENCON THERMAL ENGINEERS …Answer to the Continued Need for Energy Conservation.
ENCON THERMAL ENGINEERS
…Answer to the Continued Need for Energy Conservation
AN INTRODUCTION
• Established in 1978 during energy crisis in India.
• Oriented towards energy Conservation
• Well known for Designing, Manufacturing, Supplying and Commissioning of FUEL EFFICIENT HEATING SYSTEMS on Turn Key Basis
WE SERVE…
• Steel Plants
• Transformers & Distribution [T&D] Industries
• Automotive Industries
• Foundries
• Aluminum Industries
• Pharmaceutical Industries
• Cement Industries
• Glass Industries
• Ceramics & Refractory Industries
ENCON IN STEEL PLANTS
• Ladle Heating System• Launder Heating System• Tundish Heating System• Recuperators• Furnaces• Oxy Fuel Technology• Burners and Allied Combustion Equipment
LADLE HEATING SYSTEM
• Ladle capacities up to 300 ton/hr.
• Pioneered the unique concept of recuperative ladle preheating system with guaranteed fuel consumption as low as 1.2 ltr/ton.
• Saves 20 – 60%
• Energized by LDO/LPG/HFO/COG/OXY FUEL
LAUNDER HEATING SYSTEM
• Short and High momentum flame length achieved through high velocity burners.
• Energized by LDO/LPG/HFO/COG/ OXY FUEL
TUNDISH HEATING SYSTEM
RECUPERATORS
• Recuperators with flue temperatures of up to 950oC
• Preheat temperature of combustion air as high as 450oC
• Guaranteed savings of 15-20% and a minimum life of 3 years for ENCON Recuperators
FURNACES
• Design and manufacture furnaces on turn key basis for the following industries
Rolling Mills Forging Plants Heat Treatment Centers Wire Drawing PlantsAluminum PlantSteel Plants
• Guaranteed fuel consumption of as
low as 33 ltr/ton for billet reheating furnaces
CFD OF FURNACE
RESULTS OF CFD ANALYSIS
Jupiter- Encon Oxy-Fuel Technology
1. is a patented process for the combustion of fossil fuels with pure oxygen
2. uses an undiluted high flame temperature, but keeps the same process temperatures
3. combusts at or near stoichiometric
4. retrofitted using the same furnace design and refractories
Conventional Combustion v/sOxy-Fuel
Traditional Combustion
– Air fuel fired 21% oxygen, 79% nitrogen
– 3 to 5% excess air
Relatively Low Flame Temperature
Readily Available Nitrogen to Create NOX. Nitrogen Increases the combustion volumes
78% Potent heat escapes through Stack.
Higher Flame temperature
No change in furnace design and materials
Possibility of variable processes
No change in versatility of the usage
Does not affect Inclusions/impurities in the re-melted aluminum
Results with Aluminum Melting
Improved Energy Efficiency
• 417 – 500 Kcal / Kg for continuous runs
• Elimination of airborne nitrogen
• More radiant heat transfer
• Longer gas residence time
Lower Fuel Costs
• Natural gas fuel reduction up to 73%
• Oil fuel usage reduction up to 68%
Improved Production
• Better heat transfer
Reduction in Pollutants
RAYCON SYSTEMS
• Used to heat fresh patch up lining in Induction Furnace with the help of High Velocity Burners
• Reduced the “down time” of the furnace by 30 minutes and retrofitted 650 units of heating load to a cheaper source of energy for a 7 ton Induction furnace
• Saving of Rs.39,000/month
• Payback period of 9 months
BURNERS
• Oil Burners
• Gas Burners
• Dual Firing Burning Systems
• High Velocity Burners (OIL/GAS)
R&D ACTIVITIES
• Started in the year 1997
• Project sponsored by Gas Authority of India Limited (GAIL) and Ministry of Science & Technology in partnership with Indian Institute of Petroleum, Dehradun
• Developed gaseous film burner with savings of up to 16% compared to conventional burners
• Innovated Gas Heating Elements which can retrofit any heating elements (electric energized) application up to 550°C temperature
SOME OF OUR ESTEEMED CLIENTS
• Aarti Steel Limited • ABB Limited• AREVA Instrument • Bajaj Auto Limited• B.H.E.L• Bhushan Steel Limited• Cummins India Limited• Danielli India Limited• Divya Yog Pharmacy• Electrotherm (I) Limited• Exide • Godrej & Boyce Mfg. Co. Limited• Hyderabad Industries Limited• Ispat Industries Limited• Jindal Strips Limited• Kajaria Ceramics Limited• L.G. Electronics Limited
• LLOYDS Steel Industries Limited• Mahavir Aluminium Limited• MUKAND Limited• NALCO• Orient Abrasives Limited• Ramco Group of Industries• RHI Clasil Limited • Samtel Color Limited• SHAH Alloys Limited• Shriram Pistons & Rings Limited• SIMPLEX Castings Limited• SISCOL• Tata Motors Limited• Tata Steels Limited• Usha Martin Industries
THANK YOU!
“ Adopt eco-friendly technologies that your children can be proud of ”
Vishve Bandhu Mahendra