ECE 445: Senior Design Getting Parts
description
Transcript of ECE 445: Senior Design Getting Parts
ECE 445: Senior DesignGetting Parts
Outline
• Senior Design Lab– Parts of past projects
• ECE Electronics Service Shop ( 265 Everitt Lab )– Catalog of parts for use in ECE labs
• ECE Storeroom ( 60 Everitt Lab )– Catalog of parts for sale– Place orders through my.ece
• On your own…– Samples from manufacturers– “Textbook” Fund
Senior Design Lab
246 Everitt Lab
ECE Senior Design Lab• Located in 246 Everitt Lab• Parts from previous projects
– Wireless transceivers: Xbee, Bluetooth, etc.
– Motors and motor controllers– GPS receivers– Sensors: ultrasonic, IR, etc.– Development kits
• Microcontrollers• DSPs• FPGAs
• Parts must be signed out by a TA• Parts must be returned at the end
of the semester
ECE Electronics Service Shop
265 Everitt Lab
ECE Shop• Located in 265 Everitt Lab• Large inventory of discrete parts
– Passives: resistors, capacitors, inductors– Transistors– Digital Logic: 7400 series parts, line drivers, etc.– Analog ICs: op-amps, oscillators, etc.– Power: Voltage Regulators– Electromechanical: switches, buttons, connectors
• Parts from the ECE shop are free (within reason) to use in your senior design project.
ECE Shop Parts InventoryLarge inventory of discrete parts, list of parts on website:
http://www.ece.illinois.edu/eshop/parts/
ECE Shop Parts Inventory
Parts Request Form• MUST be filled out when parts are taken from the ECE shop
ECE Storeroom
60 Everitt Lab
ECE Storeroom
• Located in 60 Everitt Lab• A catalog of commonly used parts and items are kept in
stock, list of stock parts is available on the website– http://www.ece.illinois.edu/ecestores/– Inventory includes hand tools, project enclosures, mechanical
hardware, soldering supplies, and cables
• Parts can also be ordered from anywhere through the my.ECE website
Ordering Through my.ECE• Ordering parts using the ≈$40
available for groups from the department.
• A greater dollar amount may be approved if the item is understood to be course property.
• Ordering process– Discuss with your TA that you want to
submit a request– Sign in to my.ece (link).– Near the bottom of your main page, find the
“My Classes” frame.– In the table, find ECE 445.– In this frame, click “Order parts”.– Fill out the presented form, then hit Submit.– Notify your TA that you have submitted
a request– Once approved, your request may be
bundled with other orders by the ECE Store.– Once parts arrive, you will receive a
message from the ECE Store.
Easy Packages To Work With
• Friendly Parts Packages for ICs and discreet componentsType Package Picture Attributes
Through-Hole
DIP, PDIP, CDIPKimmo Palosaari, Wikipedia
Good power dissipation, easy to work with, commonSIP
Suffice IndustrialTechnology Limited, Honeywell
TO-220
Inductiveload, Wikipedia
Excellent power dissipation, good for linear regulators and power transistors
TO-92Inductiveload, Wikipedia
Common small signal/temp sensor package
Axial (Can)Teravolt, Wikipedia
Common, can use to jump over traces in PCB designRadial (Can)
Shaddack, Wikipedia
Easy Packages To Work With
• Friendly Parts Packages for ICs and discreet componentsType Package Picture Attributes
Through-Hole Radial (5mm)Afrank99, Wikipedia
Popular indication LED package (5mm diameter common)
SMT(Surface Mount Technology)
SOIC, SONational Semiconductor
Good power dissipation, easy to work with, common
SOTMicrochip
Common, not for high power dissipation
0603, 0805, 1206Taiyo Yuden, Digi-Key
Discreet components (R, C)
(Inductors)
Vishay
Evaluate on an individual basis, many have two bottom-side pads
Packages To Avoid
• Many parts come in multiple packages, make sure you are ordering the correct one
• Avoid BGA, CSP, WSP, DFN, QFN, TQFP, TSSOP, SSOP Packages
• Avoid packages with bottom side thermal pads• If you absolutely need a part that comes in one of these
packages, consult your TA or the ECE Shop about soldering the part
• Breakout boards are available for some hard to work with parts– Check sparkfun.com for breakout boards
On Your Own
On Your Own
•Most manufacturers will provide free samples of parts and encourage students to use their free sample service for class projects
– Some have limits: Analog Devices 2 parts only– Samples can usually be requested easily through the manufacturers
website
•The course “textbook”– If you exceed your budget or for some other reason can’t get what you
need, buy it on your own