DREDGING PUMPS - GANDARAgandara.com.mx/img/uploads/BELL_1507744840.pdf · - Diesel driven hydraulic...
Transcript of DREDGING PUMPS - GANDARAgandara.com.mx/img/uploads/BELL_1507744840.pdf · - Diesel driven hydraulic...
DR
EDG
ING
PU
MPS
2016
DR
EDG
ING
PU
MPS
2016
IND
EXBELL® PUMPS 4
• Overview• Characteristics• Production• Applications & Areas Of Operation
STRONG POINTS 7• Basic Design• Spares & Services
BELL® HEADS 10
• Sand production head• Flat barge head• Cutter head• Auger head
AVAILABLE OPTIONS 13
• Production Instrumentation• Process Instrumentation• Power packs• Pipes & Hoses
BELL® POWER PACKS 14
• Main specifications
BELL® JET PUMPS 15• Main specifications
BELL® BOOSTER STATIONS 16
• Main specifications
BELL® A-FRAME DREDGER 250 17• Main specifications• Dredging pump specifications• Deck equipment• Electrical system• Main Drives
BELL® CUTTER DREDGERS 18-19• BCD 250 & 300• BCD 400 & 500
CHARACTERISTICS
OVERVIEW
BEL
L®
PUM
PS
4
Bell 100 Bell 150 Bell 200 Bell 250 Bell 300 Bell 400
Mixture capacity max 300 m3/h 500 m3/h 800 m3/h 1250 m3/h 1800 m3/h 3150 m3/h
Pump speed approx. 1350 rpm 1200 rpm 1200 rpm 900 rpm 750 rpm 600 rpm
Max power at shaft 30 kW 65 kW 110 kW 190 kW 300 kW 500 kW
Suction bore 100 mm 150 mm 200 mm 250 mm 300 mm 400 mm
Discharge piping 100 mm 150 mm 200 mm 250 mm 300 mm 400 mm
Spherical passage 50 mm 75 mm 125 mm 130 mm 155 mm 210 mm
Weight (hydraulic) 850 kg 1075 kg 1500 kg 2600 kg 4100 kg 5000 kg
Weight (electric) 1300 kg 1600 kg 2200 kg 3500 kg 5300 kg 6400 kg
Hydraulic Pressure 250 bar 250 bar 250 bar 250 bar 250 bar 250 bar
Hydraulic Flow 90 L/min 180 L/min 270 L/min 425 L/min 680 L/min 1200 L/min
Hydraulic Cutterfl ow 35-50 L/min. 35-50 L/min 35-50 L/min 35-50 L/min 35-50 L/min 35-50 L/min
PRODUCTION
0
100
200
300
400
500
600
700
800
900
1000
0 200 400 600 800 1000 1200 1400 1600 1800 2000
Prod
uctio
n in
solid
s [m
3 /h]
Discharge distance [m]
PRODUCTION DIAGRAM BELL PUMPS (Medium Sand 230 μm)
Bell 100
Bell 150
Bell 200
Bell 250
Bell 300
Bell 400
APPLICATIONS & AREAS OF OPERATION
Typical applications
• Dredging
• Dredging maintenance
• Sand / gravel mining
• Mobile booster station
• Mounted on ladder or crane
• Suspension from A-frame
Typical areas of operation:
• Harbours
• Rivers
• Canals
• Restricted areas
• Hopper barges
BASIC DESIGN• Delivery from stock
• Heavy duty design
• Low maintenance
• Proven design
• Compact
• Multifunctional
• Low cost
• Large spherical passing
• Various suction heads available
• Changeable wearing partsST
RO
NG
PO
INTS
7
After sales department:
- Components with short delivery time
- Complete package of spare parts
- Advice and support
- Dedicated team involved from order to post delivery support
Bell Field Service:
- Post delivery support
- Warrantee and after sales services
- Training courses (in house and on site)
- Technical check-ups
- Service in remote areas
SPARES AND SERVICES
• ADJUSTABLE WEAR PLATES NIHARD
• HARDENED IMPELLER NIHARD
BEL
L® H
EAD
S
10
- Jet-water pipe and nozzles
- Suspension from crane or A-frame
- High production capacities
SAND PRODUCTION HEAD
AUGER HEADAUGER HEAD
CUTTER HEAD
FLAT BARGE HEAD
SAND PRODUCTION HEAD
- Jet-water pipe and ring around head
- Suspension from crane or A-frame
- Discharge barges
FLAT BARGE HEAD
- Separate hydraulic powered cutter
- Fixed suspension on crane or ladder
- Designed for removal of packed sand
CUTTER HEAD
- Dredging with less turbidity
- Used in polluted areas
- Less water is taken from the area
- Used for levelling soil under water
AUGER HEAD
- Discharge pressure
- Pump speed
- Depth measurement
- Booster stations
- Jet pumps
- Diesel driven hydraulic power packs
- Generator sets
- Discharge hoses including fl oats
- Discharge over land (Steel / HDPE)
- Self fl oating hoses
- Hydraulic hoses
- Jet-water hoses
- Geotubes
PRODUCTION INSTRUMENTATION
PROCESS INSTRUMENTATION
POWERPACKS
PIPES AND HOSES
AVA
ILA
BLE
O
PTIO
NS
13
BELL 150 STAND-ALONE POWER PACK• Power: 126 kW• Flow pump 1: 180 L/min.• Flow pump 2: 32 L/min.
BELL 200 STAND-ALONE POWER PACK• Power 194 kW• Flow pump 1: 270 L/min.• Flow pump 2: 45 L/min.
BELL 250 STAND-ALONE POWER PACK• Power: 253 kW• Flow pump 1: 450 L/min.• Flow pump 2: 80 L/min.
BELL 300 STAND-ALONE POWER PACK• Power: 338 kW• Flow pump 1: 700 L/min.• Flow pump 2: 110 L/min.
BEL
L® P
OW
ER
PAC
KS
14
BELL STAND-ALONE POWER PACKSAVAILABLE FOR ALL BELL DREDGING PUMPS
BELL 150 AUXILIARYPOWER PACK• Power: 110 kW• Flow pump 1: 180 L/min.• Flow pump 2: 32 L/min.
BELL JET PUMPS• Diesel or hydraulic driven• Fast dry priming• On open skid or in closed sound-
attenuated canopy• Applicable for all Bell sand production
heads and fl at barge heads
BELL 250 AUXILIARYPOWER PACK• Power: 194 kW• Flow pump 1: 425 L/min.• Flow pump 2: 60 L/min.
BELL 200 AUXILIARYPOWER PACK• Power: 129 kW• Flow pump 1: 252 L/min.• Flow pump 2: 15 L/min.
16
BELL® BOOSTER STATIONS 150, 200 & 250
BEL
L®
BO
OST
ERST
ATI
ON
S
Bell booster pumps can be used when pumping beyond the maximum discharge distance of the dredging pump is required. With multiple booster pumps in the discharge pipeline the material can be dredged miles away!
The Bell booster pump is placed in a frame with a built-in diesel tank at the bottom. In the upper part of the frame multiple ventilation grids are installed as well as doors for easy maintenance on the diesel engine. The pump itself is located outside of the canopy for easy coupling of the hoses.
BELL BOOSTER STATION 150• Power: 96 kW• Equipped with BELL 150 Pump
BELL BOOSTER STATION 200• Power: 143 kW• Equipped with BELL 200 Pump
BELL BOOSTER STATION 250• Power: 237 kW• Equipped with BELL 250 Pump
Main specifications
Dredging pump specifications
Length 12.192 mm
Width 7.376 mm
Height 6.090 mm
Design draught 607,2 mm
Total weight ± 35.000 kg
Total installed power 516 kW
Max river flow rate 3 m/s
Dredging pump BELL 250
Max mixture capacity 1250 m3/h
Pump speed 900 rpm
Max power at shaft 190 kW
Suction bore 250 mm
Discharge piping 250 mm
Spherical passage 130 mm
Weight (hydraulic) 2600 kg
Hydraulic pressure 295 bar
Hydraulic flow 425 L/min
Max dredging depth ± 45 m
Electrical system
Main Drives
Battery voltage 12 V DC
Battery current 130 Ah
Amount of battery’s 4
System voltage 24 V DC
Diesel enginesHydraulic power engine 373 kW @ 2100 rpm
Water jet engine 143 kW @ 1800 rpm
Deck equipmentWinches4x mooring winch 25 kN, holding force is 37.5 kN
1x hoisting winch 45 kN, holding force is 105 kN
17A-F
RA
ME
DR
EDG
ER
250
BCD
250
& 3
00
18
BELL CUTTER DREDGERS 250 & 300
- Dredge pump: BELL 250
- Dredge capacity (water & solids): 1250 m³/hr
- Dredge capacity in dry volume (max.): 250 m³/hr
- Stone size diameter (max.): 130 mm
- Installed power on the dredge pump: 190 kW
- Power source dredger: Diesel engine
- Positioning entities: 2x mooring winches & 2x spud poles
BELL CUTTER DREDGER 250
110
10
390
2
296
11950 19504
4454
101
0
12
H
G
F
E
D
C
B
A
J
K
L
M
N
P
Q
R
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
1110987654321 13 14 15 16 17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20Do not scale drawing.www.belldredgingpumps.com
Units :mm. / deg.
General tolerances:ISO 2768 - MISO 2768 - K 4 of 4
Sheet:
Format: Rev.Drawing Number:Scale:
Description: Drawn
Checked
Date
A01:25 A+
MK
8-9-2015BCD250 ASSEMBLY
BCD250-000 GeheelThe data, design and/or technical information appearing on this sheet is the property of Bell Dredging Pumps and is disclosed in confidence. It is not to be copied, reproduced, revealed to or appropriated by other, either in part, or in whole without the express written of Bell Dredging Pumps.
Weight:
24527.1kg
BCD
400
& 5
00
19
BELL CUTTER DREDGERS 400 & 500
- Dredge pump: BELL 500
- Dredge capacity (water & solids): 3000 m³/hr
- Dredge capacity in dry volume (max.): 600 m³/hr
- Stone size diameter (max.): 220 mm
- Installed power on the dredge pump: 400 kW
- Power source dredger: Diesel engine
- Positioning entities: 2x mooring winches & 2x spud poles
BELL CUTTER DREDGER 500
15000
804
0
29703
200
0
557
5
940
0
149
05
12
H
G
F
E
D
C
B
A
J
K
L
M
N
P
Q
R
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
1110987654321 13 14 15 16 17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20Do not scale drawing.www.belldredgingpumps.com
Units :mm. / deg.
General tolerances:ISO 2768 - MISO 2768 - K 1 of 1
Sheet:
Format: Rev.Drawing Number:Scale:
Description: Drawn
Checked
Date
A01:40 A+
MK
21-10-2015
BCD500The data, design and/or technical information appearing on this sheet is the property of Bell Dredging Pumps and is disclosed in confidence. It is not to be copied, reproduced, revealed to or appropriated by other, either in part, or in whole without the express written of Bell Dredging Pumps.
Weight:
kg
60°
BE
LLD
RE
DG
ING
PU
MP
S.C
OM
MO
RE
IN
FOR
MA
TIO
N:
Dealer:
Bell Dredging Pumps | Winkelerzand 1a | 1731 LR Winkel, the Netherlands | Telephone: +31(0)224-855 340www.BellDredgingPumps.com | [email protected] | VAT: NL8522.96.964 | COC: 56 77 52 45 03
2016