Double Jersey Circular Knitting Machine by TerrotUCC548 double jersey circular knitting machine is an electronically controlled Terrot machine which is fitted with PIEZO needle selection systems.

Terrot has achieved an outstanding position in the development and manufacturing of circular knitting machines over a period of more than 140 years. This tradition is continued perfectly in the Jacquard range from Terrot. New standards are set in matching the selection technology with PIEZO needle selection systems. Needle selection takes into account the smallest mechanical ratios and is absolutely freely controllable using 3-way techniques. And this is to be found on every knitting system. The electronic-mechanical interface is formed by the PIEZO ceramic selection elements, which reliably convert information from the machine controller even at fine machine gauges and high speeds. The result: greatest effectiveness - maximum selection reliability - minimum wear - highest efficiency.

CONTROLLER WITH DISPLAY:

Thanks to the latest microprocessor technology, it has been possible to save space by integrating the controller hardware and software into the leg of the machine.

Patterns that have once been read in can be modified retrospectively using easily understood functions.

Rotate and mirror image patterns in the x- and y-axis.

Vertical reproduction of sections of a pattern repeats by entering the multiplication factor.

Integral self-monitoring for the program sequences with error indication on the display.

All pattern data remain stored in the event of a supply failure or when the machine is switched off. This means no loss of quality in the knit due to pattern offset when restarting.

STANDARD FEATURES:

Side creel with reserve pins.

C machine frame for gauge changing with fabric batch diameter 50 cm.

Data acquisition system for machine control, recording and displaying the machine functions.

Controller with operator console and 8 MB memory capacity. This corresponds to 30 million pixels.

Ready to use LAN interface.

Automatic positioning of the fabric takedown for quick removal of the fabric batch.

Motorized fabric take-down for constant take-down tension

Automatic spray oilier.

SFE yarn feeder.

Electronic needle control with load stop motion.

Internal fabric

Cadratex fabric tube spreader.

Frequency-controlled drive/infinitely variable speed control/soft start/jog mode.

ADVANTAGES:

Pattern change can be carried out quickly and easily with all types in the electronic ranges. All necessary pattern data are transferred onto a 3.5_ floppy disk, which can be created quickly and easily using the MET5000 pattern preparation system. The 3.5_ floppy disk becomes the master and is read into the machine controller. This converts the pattern information into knitting information and passes it on to the PIEZO selection unit. But new pattern ideas can also be implemented quickly and easily on the Jacquard machines by direct means and, if necessary, via the Internet.

All Terrot machines are fitted as standard with interfaces, which enable them to be connected to BDE systems with an additional interface (option).

The advantage to you: a rapid overview of the current operational status of your Terrot machine as well as the machine data such as speed, revolution counter, end of piece, stop functions, etc. Direct access with data transfer is possible using an optional LAN cable connection.

AREAS OF APPLICATION:

Modern sports and leisure wear.

High fashion beachwear with SCC572 spider pattern.

Modern outer garments for men/ women/children.

Padded jacquard patterned jacket fabrics for men/women.

Trendy underwear with mesh device and/ or Elastane plating. Subtly jacquard patterned polar fleece- wear with blind needle plush.1

For the trendy underwear sector with the latest open knits.

Home textile fabrics for mattress covers (bedding knits).

Technical knits for the automotive sector.

Technical knits for the medicinal sector. Single Jersey Circular Knitting Machine YTW-S

 Last        Next

Description:

1. Name of the machine: High Speed Single Circular Knitting Machine, Single Jersey Knitting Machine,.   2. Brand: YITAI, has been found on 1990.   3.Usage: Used for knitting various kinds of senior single fabrics. The machine can be used to produced

clothes with various code weights, such as cotton cloth blended cloth, artificial silk/linen fabric, TTC double layer fabric etc, which are mainly used as the materials for men and women underwear, TShirt, sports suits,decoration clothes and etc.

  4. Feature of the machine: 1) This machine has high precision and convenient operation. Our R&R team applies the most advanced 3D

three-dimensional design software to strengthen the stability coefficient of main structure by precise design and make the machine run absolutely stably even at a high speed.

 

2). Advanced drive system: The machine adopts the drive gear lubricating design, which ensures that the wear and tear can be minimized when the machine runs at a high speed, thus to extend the lifetime and reduce the noise. the drive axle adopts special steel products with thermal refining, which has strong tenacity, average stress point and strong rigidity and etc. the design of lubrication system is advanced and unique.

  3). The design of lubrication system is advanced and unique.   4) we adopt the automatic processing machines and tools and execute the strict standardized production

procedure. The roundness of this machine is controlled averagely below 0.02mm to make the machine run more smoothly with low noise and shock, stable texture and flat cloth surface to supply the strongest quality guarantee for you.

  5).Cam block with high precision: It adopts special alloy steel. The cam block has high rigidity and abrasion

resistance after being treated with 3 channel polishing treatment of full-automatic CNC milling machines.   6). The heart of the machine is manufactured in special materials. And developed by high precision standard

and completely new originality design. It is more stable,credibility, high efficiency and durable.   5. Technical data:

Name of the machine Diameter Gauge Feeders H.P

Single knitting machine 13”~68” 12G~36G 30F~408F2.2HP~5.5HP

Double Interlock Circular Knitting Machine YTW-C

 Last        Next

Description:

1. Name of the machine: High Speed Double Circular Knitting Machine, Double Rib Knitting Machine, Interlock Knitting Machine 2. Brand: YITAI, has been found on 1990. 3.Usage: Be applicable to produce various kinds of superior quality rib fabric, interlock, twill, air layer, interlayer, padded bubble, stair cloth, double PK cloth, rib mini jacquard, cardigan, milano rib, silk quilt, etc. If lycra devices are

installed in the machine, it can make stretch fabric. All kinds of fabrics made by the machine are widely used in making underwear, coat fabrics, varied sportswear and fashion fabrics.. 4. Feature of the machine:1). The High-Speed Double Rib Knitting Machine is a weft knitting machine. It contributes excellent functions and wins a good reputation from customers and experts in the industry.                 2). The design of closed orbit for upper and lower cams allows to knitting1+1 and 2+2 drop needle rib, and the equipment of cams like looping, tucking, flat knitting and so on simplifies the machine’s mobility. 3) The production line can also be equipped with lycra attachment which can be used to produce elastic rib fabrics to meet the demands of various senior fabric market. 4) This machine has high precision and convenient operation. Our R&R team applies the most advanced 3D three-dimensional design software to strengthen the stability coefficient of main structure by precise design and make the machine run absolutely stably even at a high speed. 5). Advanced drive system: The machine adopts the drive gear lubricating design, which ensures that the wear and tear can be minimized when the machine runs at a high speed, thus to extend the lifetime and reduce the noise. the drive axle adopts special steel products with thermal refining, which has strong tenacity, average stress point and strong rigidity and etc. the design of lubrication system is advanced and unique. 6). The design of lubrication system is advanced and unique. 7) we adopt the automatic processing machines and tools and execute the strict standardized production procedure. The roundness of this machine is controlled averagely below 0.02mm to make the machine run more smoothly with low noise and shock, stable texture and flat cloth surface to supply the strongest quality guarantee for you. 8).Cam block with high precision: It adopts special alloy steel. The cam block has high rigidity and abrasion resistance after being treated with 3-channel polishing treatment of full-automatic CNC milling machines. 9). The heart of the machine is manufactured in special materials. And developed by high precision standard and completely new originality design. It is more stable,credibility, high efficiency and durable. 10). YITAI design system is easy to operate and highly efficiency.It is also comparable with other pattern programs in the world. 5. Technical data:

Name of the machine Diameter Gauge Feeders H.P Big rib knitting machine 30”-38” 16G-24G 60F-72F 5.5HPSmall rib knitting machine 15”-22” 12G-24G 30F-44F 5.5HPDouble knitting machine 30”-38” 18G-36G 72F-96F 5.5HP

Terry Fabric Circular Knitting Machine YTW-ST

 Last        Next

Description:

1. Name of the machine: High Speed Single Terry Knitting Machine,Terry Fabric Knitting Machine, Terry Circular Knitting Machine. 2. Brand: YITAI, has been found on 1990. 3.Usage: Be applicable to produce various kinds of terry fabric, such as velour, fleece in one side, twining electron plush, thick plush, diamond plush, terry fleece, polar fleece, steam velour, etc. which are widely used in making infant

wear, children's wear, adult's wear, sportswear, skirt, business suit and others industrial cloth. the machine can also produce elastic stretch fabric by adding the Lycra device. This machine is interchangeable with Single Circular Knitting Machine by changing the cams and some accessories to produce jersey or stitch-varied cloth. 4. Feature of the machine:1). This machine has high precision and convenient operation. Our R&R team applies the most advanced 3D three-dimensional design software to strengthen the stability coefficient of main structure by precise design and make the machine run absolutely stably even at a high speed. 2). With the perfect and precise design of cam, equipped different standards of sinker, this model can produce terry fabric in different length of loop. It is according to client’s need to change the equipment. 3). For this sort of machine, you simply can change its cylinder and cams into single knitting machine to produce jersey or stitch-varied cloth. Adding lycra attachment, you can knit elastic cloth which is suitable for seasonal variation and raise the extra value of the machine. 4) Advanced drive system: The machine adopts the drive gear lubricating design, which ensures that the wear and tear can be minimized when the machine runs at a high speed, thus to extend the lifetime and reduce the noise. the drive axle adopts special steel products with thermal refining, which has strong tenacity, average stress point and strong rigidity and etc. the design of lubrication system is advanced and unique. 5). The design of lubrication system is advanced and unique 6) we adopt the automatic processing machines and tools and execute the strict standardized production procedure. The roundness of this machine is controlled averagely below 0.02mm to make the machine run more smoothly with low noise and shock, stable texture and flat cloth surface to supply the strongest quality guarantee for you. 7).Cam block with high precision: It adopts special alloy steel. The cam block has high rigidity and abrasion resistance after being treated with 3-channel polishing treatment of full-automatic CNC milling machines. 8). The heart of the machine is manufactured in special materials. And developed by high precision standard and completely new originality design. It is more stable,credibility, high efficiency and durable. 9). YITAI design system is easy to operate and highly efficiency.It is also comparable with other pattern programs in the world. 5. Technical data:

Name of the machine Diameter Gauge Feeders H.PSingle PK Terry Knitting machine 26”-34” 14G-24G 52F-68F 3.7HP-5.5HP

Open-Width Circular Knitting Machine

 Last        Next

Description:

Model:　 YTW-DW Series & YTW-SW Series Open-Width Jersey Circular Knitting Machine Faction: With the Lycra device, this machine is desighed for jersey with elastic yarn, Non-crease elastic fabric, Lycra strech fabric. It can keep the cloth smooth without any crease. Ensure to make full use of the fabric without any waste. Thus to reduce the cost and increase the profit. The width and tightness of the cloth can be adjustable as needed. Feature:

Slitting system of the machine can slit the cloth automatically on the machine platform to smooth and flat the cloth. If it is unnecessary to slit the cloth, it can return to the ordinary take-up function.

The cams are made of special alloy steel. They have high rigidity and abrasion resistance after being treated with 3-channel polishing treatment of full-automatic CNC milling machines.

Advanced drive system: The drive axle is made of special steel products with thermal fefining, which has strong tenacity, average stress point and strong rigidity etc. The design of lubrication system is advanced and unique.

Our R&D team applies the most advanced 3D three-dimensional desigh software to strengthen the stability coefficient of main structure by precise design. The machine run stablely even at a high speed.

We adopt the automatic processing machines and tools as well as strict standardized production procedure. The roundness and flatness of this machine is controlled averagely within 0.02mm to ensure the machine run more smoothly with low noise and shock. thus guarantee to produce cloth in superior quality for the costomer.

Technical data: 

3-Thread Fleece Circular Knitting Machine YTW-SF

1. Name of the machine: High Speed Single 3-Thread Fleece Knitting Machine, Circular knitting machie, Fleece fabric Knitting Machine. 2. Brand: YITAI, has been found on 1990. 3.Usage: Be applicable to produce various kinds of fleece, french terry, 3:1,3:2 twill fabric, drill, tabby fabric, which can be widely used to produce series of sportswear, sweart shirt, sleepwear, infant wear and thermal cloth. 

Model Diameter Gauge Feeders MotorYTW-DW Series 14”~38” 12G~36G 30F~96F 2.2HP ~5.5HPYTW-SW Series 13”~68” 12G~36G 30F~408F 2.2HP~7.5HP

The length of the villus can be adjusted by the special-made sinker and cams. This machine is interchangeable with Single Circular Knitting Machine by changing the cams and some accessories. 4. Feature of the machine:1). The special-made sinker cam is used for adjusting length of fuzzy piles. This dual-purpose model also can be equipped with many types of cams and other component assemeblies. Then it will be changed into four-tracks single knitting machine. 2). It equipped with 136-sec gear drive cloth winder. By the gear box in center, there is no variation in the center of gravity and the performance is simply easy and smooth. 3). The main shaft adopts a set of tension cluth. When the tension is too strong, it will slide automatically, therefore, float thread and needle damage will not occur. That is a perfect matching forfrictional resistance, sound insulation and easily operate. 4) This machine has high precision and convenient operation. Our R&R team applies the most advanced 3D three-dimensional design software to strengthen the stability coefficient of main structure by precise design and make the machine run absolutely stably even at a high speed. 5). Advanced drive system: The machine adopts the drive gear lubricating design, which ensures that the wear and tear can be minimized when the machine runs at a high speed, thus to extend the lifetime and reduce the noise. the drive axle adopts special steel products with thermal refining, which has strong tenacity, average stress point and strong rigidity and etc. the design of lubrication system is advanced and unique. 6). The design of lubrication system is advanced and unique. 7) we adopt the automatic processing machines and tools and execute the strict standardized production procedure. The roundness of this machine is controlled averagely below 0.02mm to make the machine run more smoothly with low noise and shock, stable texture and flat cloth surface to supply the strongest quality guarantee for you. 

8).Cam block with high precision: It adopts special alloy steel. The cam block has high rigidity and abrasion resistance after being treated with 3-channel polishing treatment of full-automatic CNC milling machines. 9). The heart of the machine is manufactured in special materials. And developed by high precision standard and completely new originality design. It is more stable,credibility, high efficiency and durable. 10). YITAI design system is easy to operate and highly efficiency.It is also comparable with other pattern programs in the world. 5. Technical data:Name of the machine Diamete

r Gauge Feeders H.P

Single knitting machine 30”~34” 14G~24

G90F~102F

3.7HP~5.5HP

Circular knittingFrom Wikipedia, the free encyclopedia

Knitting using a circular needle.

Four double pointed knitting needles.

Knitting on double points.

Magic Loop knitting on one circular needle.

The earliest image of circular knitting, from the 15th century AD.

Circular knitting or knitting in the round is a form of knitting that creates a seamless tube. When knitting

circularly, the knitting is cast on and the circle of stitches is joined. Knitting is worked in rounds (the equivalent

of rows in flat knitting) in a spiral.[1] Originally, circular knitting was done using a set of four or five double-

pointed needles. Later, circular needles were invented, which can also be used to knit in the round: the circular

needle looks like two short knitting needles connected by a cable between them.

Longer circular needles can be used to produce narrow tubes of knitting for socks, mittens, and other items

using the Magic Loop technique. Machinesalso produce circular knitting; double bed machines can be set up to

knit on the front bed in one direction then the back bed on the return, creating a knitted tube. [2] Specialized

knitting machines for sock-knitting use individual latch-hook needles to make each stitch in a round frame. [3]

Many types of sweaters are traditionally knit in the round. Planned openings (arm holes, necks, cardigan fronts)

are temporarily knitted with extra stitches, reinforced if necessary. Then the extra stitches are cut to create the

opening, and are stitched with a sewing machine to prevent unraveling.[4] This technique is called steeking.

The Magic Loop technique Invented by Sarah Hauschka and written in Beverly Galeska's booklet "The Magic

Loop," published by FiberTrends, the Magic Loop uses a 40-inch-long circular needle to knit projects of any

circumference in the round. The key is pulling a loop of extra cable out between the stitches halfway through

the round.

Using a 47-inch-long circular needle lets the knitter knit two-at-a-time projects, like two socks at once, using the

Magic Loop method.

Flat knittingFrom Wikipedia, the free encyclopedia

A scarf knitted using flat knitting on single pointed needles

Flat knitting on double pointed needles

Flat knitting on a circular needle

Flat knitting is a method for producing knitted fabrics in which the work is turned periodically, i.e., the fabric is

knitted from alternating sides. Another method of reaching the same result is to knit alternately from right to left

and left to right without turning; this back-and-forth technique requires either innate or

learned ambidextrous motor skills. The two sides (or "faces") of the fabric are usually designated as theright

side (the side that faces outwards, towards the viewer and away from the wearer's body) and the wrong

side (the side that faces inwards, away from the viewer and towards the wearer's body).

Flat knitting is usually contrasted with circular knitting, in which the fabric is always knitted from the same side.

Flat knitting can complicate knitting somewhat compared to circular knitting, since the same stitch (as seen

from the right side) is produced by two different movements when knitted from the right and wrong sides. Thus,

a knit stitch (as seen from the right side) may be produced by a knit stitch on the right side, or by a purl stitch

on the wrong side. This may cause the gauge of the knitting to vary in alternating rows ofstockinette fabrics;

however, this effect is usually not noticeable, and may be eliminated with practice (the usual way) or by

using needles of two different sizes (an unusual way).

In flat knitting, the fabric is usually turned after every row. However, in some versions of double knitting with two

yarns and double-pointed knitting needles, the fabric may turned after every second row.

In Industrial Knitting applications, the terms "Flat" and "Circular" have very different meanings to those given

above. A "Flat" or Vee Bed knitting machine consists of 2 flat needle beds arranged in an upside-down "V"

formation. These needle beds can be up to 2.5 metres wide. A carriage, also known as a Cambox or Head,

moves backwards and forwards across these needle beds, working the needles to selectively, knit, tuck or

transfer stitches. A flat knitting machine is very flexible, allowing complex stitch designs, shaped knitting and

precise width adjustment. It is, however relatively slow when compared to a circular machine. The two largest

manufacturers of industrial flat knitting machines are Stoll of Germany, and Shima Seiki of Japan. The

industrial hand flat knitting machine is considered to be launched by the Isaac Lamb patents. [1]