Data logger Sebalog D
2
Sebalog D Pressure & flow data logger with GSM Benefits Network monitoring using GSM Wireless readouts and programming Analogue and digital inputs Large internal memory 5-year battery lifespan Small and robust Real-time measurements Convenient and safe Using a Sebalog D data logger, you will always remain informed about exactly what is going on in your supply network. You can record pressure and flow on up to 4 channels simultaneously, and send the data as daily updates to the control centre by GSM, conveniently and reliably. Don’t miss anything In the event of an alarm, the data logger automatically sends SMS and e-mail messages. Furthermore, it transmits all measurement data recorded up to the time the alarm was triggered to the control centre. Wireless operation Even when GSM is not used, the data logger transmits all data wirelessly. An integrated radio modem allows communi- cation straight through closed manhole covers. Fencing off shafts or traffic areas for inspections becomes unnecessary. A brief glance The Sebalog D supports real-time measurements for all measuring channels. This allows the user to gain an overview of what is currently happening in the pipe. Online measurement by GSM data transfer is also possible. The logger does not stop recording during the real-time measurements, so that the measured data are always saved in full. Compact and reliable Thanks to its small size and robust housing, the Sebalog D can still be used even in the most adverse conditions. The internal battery, which can supply the logger with power for 5 years under standard conditions, as well as its extremely large memory for almost 1 million measurements, give you all the freedom you need for your specific application. Flexible usage Whether used on already installed measuring points, or as a new installation, the Sebalog D is compatible with numerous other flow meters and sensors. A Sebalog D being used in Brazil to measure pressure A Sebalog D being used in Germany for a flow measurement
description
The new Sebalog D of SebaKMT is a pressure and flow data logger with GMS for water leak detection.
Transcript of Data logger Sebalog D
Sebalog D Pressure & fl ow data logger with GSM
Benefi ts Network monitoring using GSM
Wireless readouts and programming
Analogue and digital inputs
Large internal memory
5-year battery lifespan
Small and robust
Real-time measurements
Convenient and safeUsing a Sebalog D data logger, you will always remain informed about exactly what is going on in your supply network. You can record pressure and fl ow on up to 4 channels simultaneously, and send the data as daily updates to the control centre by GSM, conveniently and reliably.
Don’t miss anything
In the event of an alarm, the data logger automatically sends SMS and e-mail messages. Furthermore, it transmits all measurement data recorded up to the time the alarm was triggered to the control centre.
Wireless operation
Even when GSM is not used, the data logger transmits all data wirelessly. An integrated radio modem allows communi-cation straight through closed manhole covers. Fencing off shafts or traffi c areas for inspections becomes unnecessary.
A brief glance
The Sebalog D supports real-time measurements for all measuring channels. This allows the user to gain an overview of what is currently happening in the pipe.
Online measurement by GSM data transfer is also possible. The logger does not stop recording during the real-time measurements, so that the measured data are always saved in full.
Compact and reliable
Thanks to its small size and robust housing, the Sebalog D can still be used even in the most adverse conditions.
The internal battery, which can supply the logger with power for 5 years under standard conditions, as well as its extremely large memory for almost 1 million measurements, give you all the freedom you need for your specifi c application.
Flexible usage
Whether used on already installed measuring points, or as a new installation, the Sebalog D is compatible with numerous other fl ow meters and sensors.
A Sebalog D being used in Brazil to measure pressure
A Sebalog D being used in Germany for a fl ow measurement
ISO 9001:2008SebaKMT · Dr.-Herbert-Iann-Str. 6 · 96148 Baunach/Germany · Tel. +49(0) 95 44 - 6 80 Fax +49(0) 95 44 - 22 73 · [email protected] · www.sebakmt.com
Technical data subject to change without notice.LFT_Sebalog D_eng_2011_48
Sebalog Reader 3 doing a real-time measurement of a Sebalog D
Communication options using a Sebalog D
USB
Radio
External systemse.g. GIS, SCADA
Software SebaDataView 3
GSM/GPRS
Sebalog D data logger
Communication
Radio 868 MHz, 915 MHz
GSM/GPRS modem Optional (850/900/1,800/1,900 MHz)
Cable connection USB
Input channels
Digital 0 … 5 V (max. 4 channels), frequency/pulse
Analogue 0 … 20 mA (max. 2 channels)
Relay inputs 2
Relay outputs 2
Sensors
Internal pressure sensors Optional: 0 … 16 bar (25, 35, others on request)
External pressure sensors
Optional: 0 … 16 bar(25, 35, others on request)
Sensor precision ±0,1%
Logger
Recording interval 1 s … 24 h
Memory 4 MB block or roll memory
Alarm confi guration Can be programmed for each channel
Alarm messages SMS, e-mail
Logger hardware
Dimensions 115 x 115 x 180 mm
Weight 0.8 kg
Power supply Internal Li battery, < 5 years (standard confi guration)
Temperature range -10 °C … +50 °C
Protection class IP 68
Scope of delivery
Sebalog D data logger Switching magnet USB readout cable Connection cables for sensors Connection cable for external power supply PC software SebaDataView 3
Model-specifi c features
GSM antenna (for an integrated GSM modem) Pressure hose (for integrated pressure sensors)
Options
Sebalog Reader 3 Portable wireless readout device with display, also for use as a PC wireless interface
Rechargeable battery (external) for GSM/GPRS online measurements and high data transfer intervals
Radio
FTP Server
seb
aKM
T is
a r
egis
tere
d tr
adem
ark
of th
e se
baK
MT
grou
p
Sebalog D
