Innovative Cylinder Filling SystemsCryoVation LLC | Hainsport, New Jersey | CryoVation.com | TheCryoShop.com | 609.914.4792

Equipment Catalog

Address:9B Mary WayHainesport, NJ 08036

Contact

Phone: 609.914.4792

Fax: 609.914.4795

Web: www.cryovation.com Store: www.thecryoshop.com

Scan and connect

ph: 609.914.4792 ph: 609.914.4792

INDUSTRIAL GAS

MEDICAL OXYGEN

CO2

SPECIALTY GAS

PARTS

Pumps VaporizersPump Control Systems Control PanelsVacuum Pumps Fill-Free Automated Filling SystemsCO2 & WaterbathTM HeliumSureGasTM System Cryogenic Liquid Filling

Medical O2 FillingMobile Filling SystemsServices & FDA

Controls & ManifoldsBakeout Oven & RollersPurifiers & Analytics

SequeFillTM & Miscellaneous

Parts & Service

Contentsph: 609.914.4792 ph: 609.914.4792

Visit our online store!

CryoVation offers an online marketplace, shop for all replacement parts for our equipment, theri equipment, and MORE!

thecryoshop.com

CryoVation specializes in customized plant systems, handling all your needs from layout and design to installation and training. CryoVation also provides service, consulting and on-going technical support.

Manifold systems that fit your distribution system and facility space.

Control Packages for all levels. From manual to semi-automated to fully automated. Pressure, Temperature or Gravimetric.

Our Sales and Engineering team can help to provide the most efficient layout and size your equipment to handle current and future volumes.

Cylinder Filling Systems ph: 609.914.4792 ph: 609.914.4792

CryoVation has made quality control and safety our #1 priority. We are investing the time and have developed the procedures to ensure that the products that leave our dock each day have been thoroughly checked and cleared by the following departments.

Departments working together: ● Parts Inspection ● Oxygen Cleaning ● Pressure and Vacuum Testing ● Calibration of Weight, Temperature or Pressure ● Trained and Experienced Technicians

Oxygen Cleaning Thorough Evaluation Product Inspection

Quality Control & Safetyph: 609.914.4792 ph: 609.914.4792

Cryo-Chem

● Flow rate of 1.7 - 3.5 gpm (13 liters/ min.) at 4000 psi (275 bar) MAWP● 10-20 hp TEFC motor● NEMA 4 eletrical control with manual disconnect,motor starter, hour meter, liquid-filled pressure gauge, over-pressure switch and On/Off button control● Large diameter cold end● Vacuum-jacketed, sump● Heavy-duty drive end● Surge chamber and pressure relief valve● Stainless steel belt guard

NDPD Syle - Refurbished and Exchange Pumps ● Vacuum jacketed cold end helps minimize heat leak and reduce product loss● Krytox lubricated grease packed bearings with re-greasable fittings for extended operation● Split drive end housing for easy maintenance access● Intermediate purge connection allows for extended packing life

CV40 Cryogenic Filling Pump – to deliver up to 4 gpm (15 lpm), and up to 4000 psi (275 bar) MAWP. Includes:● Motor, 20 hp TEFC energy efficient model with motor adjustment● Galvanized Heavy Steel Skid with Stainless Belt Guard Cover● Pressure Switch ● Reference Pressure Gauge● Surge Chamber with high pressure relief valve ● Cold End, XL 1.75" diameter piston ● Vacuum-jacketed sump with V-Band Clamp● Drive End, XL 1.50" stroke Extra heavy duty● Pushrod Gas Seal Covers with Seal Leak Thermocouple port

Pumps - Heavy Duty ph: 609.914.4792 ph: 609.914.4792

CP

CV40

Models CV10 to CV22● Flow Rate: 0.5 - 2.2 gpm● Pressure: 3000 - 6000 psi● Product: LIN/LOX/LAR

CV22/4 Cryogenic Filling Pump● Delivers up to 2.2 gpm (8.3 liters/min.) at 3500 psi (240 bar) maximum working presure● 7.5 hp/10 hp TEFC motor● NEMA 4 electrical control with manual disconnect, motor starter, hour meter, pressure gauge, over-pressure switch and On-Off button control● Vacuum jacketed cold end, Krytox lubricated drive end ● Surge chamber with pressure relief valve● Powder painted heavy steel skid

Available up to 6000 psiAvailable with motor frequency control to provide easy adjustment of flow rate

We manufacture and stock parts for all major makes and models, including:● CryoVation - CV, WCP, W50 P1600, P1700, P1800, P1100● WDPD, NDPD, P2K, SPD● SDPD, PD3000, LXR● Cardox CFU CO2 Pump● Woodland

Ask About our Pump Exchange

Program

Pumps - Cryogenicph: 609.914.4792 ph: 609.914.4792

A full line of single and 2-stage rotary vacuum pumps for all industrial and specialty gas applications. Accessories include Vacuum Stands, Motor Starters, Inert and O2 compatible lubricants and Safety Devices.

High Vacuum ModelsLeybold D25B Trivac is a durable vacuum pump with a superior vapor handling capability. This dual stage rotary vane mechanical vacuum pump offers an excellent ultimate pressure of 1x10-4 Torr. The Leybold D25 vacuum pumps have a pumping speed displacement of 20.9 CFM

High Flow ModelsLeybold Sogevac SV65 single stage oil sealed vacuum pump is designed for continuous operation over the working pressure range from atmosphere to less than 1 Torr. It consists of the pump body oil casing and drive cooling system. The Leybold Sogevac SV65 has built in exhaust filters, gas ballast valve, and an automatic oil return system. It is low noise, compact, low vibration, and easy to operate. This Leybold Sogevac SV65 is also easy to maintain, service and repair. Pumping Speed 46 CFM.

Anti-suckback is built into all our rotary vane pumps

Vacuum Pumps ph: 609.914.4792 ph: 609.914.4792

Super Pro Panel Can be added to any make

or model of pump

The leading cause of pump failure is prolonged cavitation.Save money on excess repairs with one of our Pump Protection Kits!

Cavitation - Pump Prime Protection Kit To monitor pump discharge temperature and interrupt operation if temperature rises above, and maintains for 45 seconds, a higher temperature than set point. Includes the following:

Blow-By ProtectionMonitoring for cryogenic temperatures leaking or blowing-by the cold end. Preventing Drive end from freezing up.

Liquid Saver KitProvides remote control of liquid supply to the pump with automatic shut-off after selected time delay of inactivity

Includes liquid supply solenoid valve; fittings and safety relief for installation in liquid line, and control panel

Pump Unloader Kit Automatically “unloads” the pressure from the pump discharge line to allow start-up against a low back-pressure. Pump life is increased and cavitation minimized. Vent silencer optional.

SuperProTM - Pump Protectionph: 609.914.4792 ph: 609.914.4792

Auto CO2 Fill Manifold - SwitchoverAllows for automatic switching between (2) fill mani-folds upon “full” sensing of either cylinder. Includes the following: ● Control panel with necessary relays, “Ready” push-buttons, and status indicator lights ● Solenoid Valves – (2) ea. cylinder fill and (1) ea. bypass ● Scales – (2) digital, 36” platform ● Fill hoses, gauges, safety relief valves and support stand

SC-5 Low Volume CO2 pump● SC-5 is splash lubricated ● Pumps at a rate of 6 pounds per minute ● Discharge pressure of 1200-1500 psi.

W50 Carbon Dioxide Pump ● 50 lbs. / min. (22.7 kg. / min.) at 1500 psi maximum working pressure ● 7.5 hp motor with surge chamber, relief valve, liquid- filled pressure gauge, safety bypass valve set @ 1000 psi, cool-down valve and heavy duty base

CO2 ph: 609.914.4792 ph: 609.914.4792

CO2ph: 609.914.4792 ph: 609.914.4792

Amps

Maximum Current200 ----------------------------------------------------------

100 ----------------------------------------------------------

Min

utes

Filling Time30 ----------------------------------------------------------

15 ----------------------------------------------------------

Traditional Electric Vaporizer

CryoVation’s Waterbath Vaporizer

Save Electricity...CryoVation’s Waterbath Vaporizer uses less electricity than a traditional electric va-porizer. Reduce your power consumption and start saving money!

Faster Fill...Upgrade to a Waterbath Vaporizer and reduce your fill times by 60% when you switch from your old style electric vapor-izer.

“ Reduce fill times and save on elec-tricity consump-tion

”

Issue: Interrupted gas supply at pressures above 400 PSIMany fabrication shops require a constant, uninterrupted gas supply at pressures exceeding bulk tank capability (laser cutting, injection molding, etc.). For these applications, any pause in the gas supply can result in lost productivity, ruined work-pieces, and even downtime for an entire opera-tion.

Gas changeover manifolds can be utilized by smaller operations that are using only a limited amount of product. However, the process of delivering and changing out empty cylinders is te-dious, labor intensive and expensive.

Solution: Smart Control SystemsCryoVation offers its PAC-1 (Pump Automated Control) Console and its CV Cryogenic Pump to pressurize a high pressure gas pack or reserve bank of cylinders.

The PAC-1 is PLC controlled and will sense a programmed low pressure in the reserve gas bank to turn on and, at high pressure set-point, turn off again. Regulators control the desired flow of product into the building. This entire process is automated and requires virtually no human inter-action as long as the liquid source is maintained.

SureGasTM System ph: 609.914.4792 ph: 609.914.4792

Providing unattended and constant gas flow to keep customers producing

SureGasTM Systemph: 609.914.4792 ph: 609.914.4792

SOS-1000 Total Flow capacity:

1000 scfh

Flow Boosting Vaporizers The SOS Series Vaporizers are designed to quickly install on any Liquid Cylinder to increase the output gas use capaity. The SOS Vaporzier can be used with one or two cylinders. While one cylinder is “on-line” the other is on standby, with any excess pressure build-up venting into the gas use stream. Includes brass manifold, liquid and economizer hoses, check valves and vaporizer module.

Part No. AMBIENT VAPORIZERS - LOW PRESSURE, 500 PSI

3026-3099 SOS-500, Liquid Cylinder Mount, O2 service, with hoses / ftgs.3026-3101 SOS-500, Liquid Cylinder Mount, Inert service, with hoses / ftgs.3026-3095 SOS-500, Liquid Cylinder Mount, CO2 service, with hoses / ftgs.3026-3157 SOS-1000, Liquid Cylinder Mount, Inert service, with hoses / ftgs.3026-3158 SOS-1000, Liquid Cylinder Mount, O2 service, with hoses / ftgs.3026-3087 VD1000B, 1000 SCFH, Free Standing3026-2660 V1500ALW, 1500 SCFH, Wall / Tank Mount3026-2700 V02KAL , 2000 SCFH3026-2701 V02KAL , 2000 SCFH, O2 Clean3026-2760 V04KAL , 4000 SCFH3026-2770 V04KAL , 4000 SCFH, O2 Clean3026-2960 V05KAL , 5000 SCFH3026-2961 V05KAL , 5000 SCFH, O2 Clean3026-3159 V08KAL , 8000 SCFH3026-3160 V08KAL , 8000 SCFH, O2 Clean3026-3360 V10KAL , 10,000 SCFH3026-3361 V10KAL , 10,000 SCFH, O2 Clean3026-3560 V12KAL , 12,000 SCFH3026-3561 V12KAL , 12,000 SCFH, O2 Clean3026-3740 V15KAL , 15,000 SCFH3026-3741 V15KAL , 15,000 SCFH, O2 Clean3026-3965 V18KAL , 18,000 SCFH3026-3966 V18KAL , 18,000 SCFH, O2 Clean3026-3970 V22KAL , 22,000 SCFH3026-3971 V22KAL , 22,000 SCFH, O2 Clean

SOS-500Total Flow capacity: 500 scfh

Vaporizers - Low Pressure ph: 609.914.4792 ph: 609.914.4792

Ambient VaporizersAmbient vaporizers are manufactured in a wide range of sizes and working pressures:● High Pressure – 4000 psi & 6000 psi● Size – Calculated based upon fluid, duty cycle, climate and pressure● Tubing – Stainless, Brass & Monel

AMBIENT VAPORIZERS - HIGH PRESSURE, 4000 PSI

3046-2880 V05KSS, 5000 SCFH, Stainless steel lined, Inert Service3046-2881 V05KSS, 5000 SCFH, Stainless steel lined, Oxygen service3046-3280 V08KSS, 8000 SCFH, Stainless steel lined, Inert Service3046-3281 V08KSS, 8000 SCFH, Stainless steel lined, Oxygen Service3046-3480 V10KSS, 10,000 SCFH, Stainless steel lined, Inert Service3046-3481 V10KSS, 10,000 SCFH, Stainless steel lined, Oxygen Service3046-3400 V10KBR, 10,000 SCFH, Brass lined, 3600 PSI3046-3680 V12KSS, 12,000 SCFH, Stainless steel lined, Inert Service3046-3681 V12KSS, 12,000 SCFH, Stainless steel lined, Oxygen Service3046-3600 V12KBR, 12,000 SCFH, Brass lined, 3600 PSI3046-3860 V15KSS, 15,000 SCFH, Stainless steel lined, Inert Service3046-3862 V15KSS, 15,000 SCFH, Stainless steel lined, Oxygen Service3046-3780 V15KBR, 15,000 SCFH, Brass lined, 3600 PSI3046-3970 V18KSS, 18,000 SCFH, Stainless steel lined, Inert Service3046-3971 V18KSS, 18,000 SCFH, Stainless steel lined, Oxygen Service3046-3990 V18KBR, 18,000 SCFH, Brass lined, 3600 PSI3046-4010 V22KSS, 22,000 SCFH, Stainless steel lined, Inert Service3046-4012 V22KSS, 22,000 SCFH, Stainless steel lined, Oxygen Service3046-4011 V22KBR, 22,000 SCFH, Brass lined, 3600 PSI

AMBIENT VAPORIZERS - ULTRA HIGH PRESSURE, 6000 PSI

3066-2900 V05KSS6 , 5000 SCFH, Stainless steel lined3066-3300 V08KSS6 , 8000 SCFH, Stainless steel lined3066-3500 V10KSS6, 10,000 SCFH, Stainless steel lined3066-3700 V12KSS6 , 12,000 SCFH, Stainless steel lined3066-3880 V15KSS6 , 15,000 SCFH, Stainless steel lined

Vaporizers - High Pressureph: 609.914.4792 ph: 609.914.4792

Fan Ambient VaporizerImprove vaporizer rating up to 100% by adding thermoswitch, automatically controlled fan to push air through fins.

Includes 34" Enclosed Steel Fan, Thermocouple, Temperature controller and motor starter control box.

Vaporizer Segment System Split an existing vaporizer (or connecting 2 separate vaporizers) with an automatic valve and temperature controller. When cold temperature is sensed past the vaporizer, the valve opens and allows for additional vaporization. Available for LIN / LAR / LOX Service

Vaporizer Accessories ph: 609.914.4792 ph: 609.914.4792

5 Gas Mix Panel

5 Gas Mix Panel with Fill-Free™

Control Panelsph: 609.914.4792 ph: 609.914.4792

The Fill-Free™ 1.0 allows the operator to enter the desired DOT fill pressure and vacuum level, on either the Manifold “A” or “B” set-up screen, and start the fill process. The cylinder temperature is monitored and the ultimate fill pressure is automatically calculated and displayed.

The operator is alerted at vent completion, at vacuum completion, and for leak check during fill cycle. Once full, the pump is automatically stopped and the operator is again alerted. Optional high-pressure valves may be added to shut off the vent, vacuum and/or fill lines.

Fill-Free™ 2.0Similar to above Fill-Free™1.0, but programmed with all of customer's mix "Recipes" to guide operator through accurate mixture filling

Automated Filling With Touch-Screen Controls

Fill-Free™ 1.0Add new technology to your old fill system!

The Fill-Free™ 1.0 semi-automated control package can be added to an existing filling system or built into a new panel like the one at left. The system as shown includes:

● Panel Mount, Color Touch Screen ● Pressure Transducers (2) ● Vacuum Transducer (1) ● Programmable Controller (PLC) with fill "recipes" ● Thermocouple

Fill-FreeTM - Semi Automated ph: 609.914.4792 ph: 609.914.4792

Fill-Free™ 4.0 and 5.0 Automatic Cylinder Filling System● Completely automatic, unattended filling of high-pressure oxygen or mixed gases● Control system with Mitsubishi PLC controller for all input and output interfacing with all other major components. Program is designed, installed tested and design-protected by CryoVation● Temperature/pressure filling of oxygen ● Gravimetric filling of mixes and pure inert gases● PC supported, full-color 19” “touch-screen” display, Wonder ware® (windows-based) software.● Enclosure, NEMA 4, housing all control components; free standing● Control valve manifold with air-actuated valves● Audible or visual signaling of leak check requirement● Ethernet connection for remote monitoring● Control panel for manual operation.

Fill-FreeTM - Automatedph: 609.914.4792 ph: 609.914.4792

Traversing ManifoldsMaximize the use of floor space while minimizing cylinder handling. Cylinders are stored and filled in the same location, and the manifolds are moved on a track to the cylinders to be filled. Most include:

● Structural frame with parallel tracks ● Flexible hoses to allow manifold movement● High-capacity manifolds with station valves and hoses

Linear ManifoldsAvailable in a wide variety of sizes, working pressures and gas types.

● Cap tray● Flex hoses● Heavy steel frame, powder painted● Individual station valves with burst disc

Palletized ManifoldsA wide array of pre-engineered palletized fill islands are available. Designs range from single-sided stationary fill heads to double-sided traversing fill heads. Fill islands have a control center for either manual or automated filling. Along with a customized fill island, a matching cylinder prep-and-sort island can be designed.

● 15, 16, 18 and 21-cylinder designs● Permanently fixed or track-mounted traversing● Removable side panel for easy maintenance● 360-degree swivel and quick-connect up grades available● Individual shut-off valves optional

Manifolds ph: 609.914.4792 ph: 609.914.4792

Helium Remote Cascade with optional Booster Pump - Requires trailers to be manifolded into zonesRemote Helium Zone Management System: Includes installing remote solenoid valves and pressure transducers at the tubes. Each “zone” which includes one or two tubes per zone and has a remote valve and pressure transducer. Inside, at the control center, a panel is installed with local control for each zone and a digital pressure readout for each zone.

Control Components are fully enclosed in a NEMA 4 enclosure and mounted at tube storage. Operator interface is located in fill area.

Helium Booster System: Includes the following major components: ● Booster Pump ● Relief Valve● Gauges● Vent Valve with Silencer ● Check Valve ● Custom Stand, powder painted steel● Associated fittings and tubing

Helium Systemsph: 609.914.4792 ph: 609.914.4792

Automatic CO2 Dual Fill SystemAllows for automatic switching between (2) fill manifolds upon “full” sensing of either cylinder. Includes the following:● Control panel with necessary relays, “Ready” push-buttons, and status indicator lights● Solenoid Valves – (2) ea. cylinder fill and (1) ea. bypass ● Scales – (2) digital, 36” platform● Fill hoses, gauges, safety relief valves and support stand

Liquid Filling ph: 609.914.4792 ph: 609.914.4792

LiquiFill™The LiquiFill™ automated system provides minimal loss while reducing fill time. It includes a PLC control console, fill manifold with manual and actuated valves, hoses, safeties, pressure gauge and pressure switch, and centrifugal pump skid with 1x2x4.5 pump, 7.5 hp motor; and digital scale.

Fills 180-liter container in approximately 4-5 minutes.

Includes all necessary manual and solenoid valve, hoses, pressure gauge, safeties, digital scale and support stand.

Automated Filling - Single or Multiple Stands

Shown above is CO2 Automatic Changeover System

Liquid Fillingph: 609.914.4792 ph: 609.914.4792

Complete Specialty Gas Capabilites● Training and support● Full line of equipment manufactured in-house● Rollers, analyzers, purifiers, bakeout systems, manifolds and controls

Level 1: Take your existing gases (N2, O2, Ar, CO2, He) to the next level using gravimetric and basic specialty gas analysis to achieve 10 ppm, UHP, USP, NF, zero gas, pure gas and blends.

Recommended equipment package includes: Spec gas panel with gravimetric option, high accuracy scale, radial manifold, linear manifold, and reserve gas banks for each product. Additional options include bakeout ovens and cylinder rollers.

Level 2: Introduce specialty and rare gases (H2, CH4, CO, Ethane, Ethylene, Propane, etc.) into the mix.

Recommended equipment package includes: Auxiliary panel, supply manifold for each product and additional analyticals.

Level 3: Add reactives and acidics. Recommended equipment package includes: Separate panel, manifolding, scubbers and abatement system.

Specialty Gas Controls ph: 609.914.4792 ph: 609.914.4792

● Large Color Touchscreen HMI● PLC Control and Recipe Guide● Sartorious Cylinder Filling Scale with 150 Kg capacity and 0.1 g accuracy● Built-In High Vacuum Pump System● Multiple Pressure and Vacuum Transducers● 10-Gas Swing-Arm Selector● Pump Start/Stop● Additional Gravimetric Fill Lead for Primary Standards Production● Scale Booth Enclosure with our New Stabilizer Arm● 12 Cylinder Radial Manifold with individual isolation valves● Ethernet Module for Remote Access

Fusion-10 Gravimetric Gas Blending Panel

Specialty Gas Controlsph: 609.914.4792 ph: 609.914.4792

● 12, 15 and 21 Cylinder Capacity● All aluminum, double-wall insulated en-closure with convective heating system, thermostatic control and over-temperature safety switch● PLC controlled cycle operation High Vac-uum Meter, micron range Stainless Steel Vacuum● Header with purge valve, Vacuum Pump Isolation Valve, Vacuum Gauge (reference), Vacuum Probe (for high vacuum meter) and flexible hoses with CGA-580 connections● Hinged loading door with power interrupt safety switch ● Removable Lids ● Cold Trap – Free-standing all stainless steel with removable LN2 sump● Touch Screen Control

Cylinder Bake-Out SystemDesigned to prepare cylinders for specialty gas service by drying the internal cylinder walls. Cylinders are prepared by insertion into the bake-out enclosure that externally heats the cylinders. Simultaneously the cylinders are under a high vacuum to remove entrapped moisture. A Cold Trap, filled with liquid nitrogen, traps moisture before it can enter the vacuum pump. Likewise, the Trap also eliminates any possibility of lubrication molecules from back-flowing to the cylinders. An optional purge cycle is available.

Bake-Out System ph: 609.914.4792 ph: 609.914.4792

SCGR-4 Cylinder Gas Mixing Roller4-cylinder capacity (shown above) includes: ● Air actuated cylinder tilt rack ● Electrical control system to provide automatic, time delayed reversal of rolling direction ● Cylinder rollers, non-mar ● Safety Bar

Voltage options:

● 110v or 220v single-phase, or 240/480 Also available in 2- and 6-cylinder capacity

Cylinder Inverter

Cylinder Rollers & Invertersph: 609.914.4792 ph: 609.914.4792

Purifier, Trace Oxygen RemovalDeoxo 2.0 Purifier, 15,000 scfh inert gas capacity at 3000 PSI maximum working pressure

Helium Purifier 3 in 1 Purification SystemThe CryoVation Grade 6.0 Helium Purification System is designed to purify inert gases utilizing three unique Purifiers either individually or in series. The Purifier System is comprised of the following:● Deoxo 2.0 Purifier● DeHydro 2.0 Purifier,● Helium Purifier System

Purifier, Trace Moisture RemovalDeHydro 2.0 Purifier, 15,000 scfh inert gas capacity at 3000 PSI mawp

Purifiers ph: 609.914.4792 ph: 609.914.4792

Analytical Control Panel- Cabinet or In-Wall MountingCustom analyzer cabinets are built to suit the customers requirement. Includes support gas and sample inputs. Each analyzer control has a bypass flow meter, purge and sample needle valves and sample source 5-way valve. The package has two sample headers.

Support gas connections include all zero and span gases and fuel and air for the HC analyzer.

Analyticsph: 609.914.4792 ph: 609.914.4792

A-Frame Rack

PSC-52 Rack

R60 Rack

R30 Rack

Starboard R20 Rack

Fill Racks ph: 609.914.4792 ph: 609.914.4792

PPS 2500, 5000 and 10,000 CryoVation manufactures several self-contained filling systems, with volumes ranging from 2,500 scfh to 10,000 scfh

Portable Pumping System for Mobile, On-Site Filling

Medical O2 Fill Systemsph: 609.914.4792 ph: 609.914.4792

Benefits:● Reduction in cylinder handling● Reduction in costs● Improved sanitation/reduced infection risk● Reduction in cylinder inventory● Improved asset management and control of your oxygen invetory

With mobile filling, the gas supplier can bring product to the DME provider, so that oxygen cylinders never have to leave the DME’s provider’s possession.

A mobile filling system also allows you to easily move your operations base, anytime you want.

CryoVation can build a system for you in either a cargotrailer or box truck, and tailor it to meet your needs with features such as a built-in storage and workbench, lighting, designated electrical outlets, upgraded racking, built-in generators, heat/air conditioning, analytic station and more.

Operational and FDA Compliance training are also available

CryoVation’s turnkey mobile filling systems give you the competitive advantage!

Simplify your distribution chain by bringing gas and liquid oxygen directly to your customers and filling their cylinders on site.

Mobile Filling Systems ph: 609.914.4792 ph: 609.914.4792

We offer the choice of a Box Truck or Cargo Trailer with interior layout options

Standard Features Customizable Features● Diamond-plated walls ● Storage cabinet● Diamond-plated floor ● Workbench● Reinforced sub-floor ● Additional lighting● Ventilation system ● Fans● Electric outlets/switches ● Manifolds● Onboard generator ● Analytic station

Safety is very important when handling oxygen, so the CryoVation system is equipped with pressure and temperature safeties. Additionally, all contacting surfaces are specially cleaned and the excess product is carefully vented outside through a muffler.

Once the system is installed, CryoVation will provide 1-2 days of operational training. We also offer FDA compliance training.

Two types of fill racks are available: a traditional linear design, or inverted fill racks. Both allow you to customize the number of cylinders you fill at one time from 20 to 200.

Accessorize:CryoVation offers all the accessories needed to fully equip your mobile filling system, including Servomex analyzers, cylinder storage and transport carts, calibration gases, cylinder seals and labels, thermometers and more.

Mobile Filling Systemsph: 609.914.4792 ph: 609.914.4792

Recalibration / Recertification● Gauges certified by CryoVation are traceable to N.I.S.T.● CryoVation certification and oxygen cleaning practices meet FDA requirements used for filling Medical Grade● According to the CGMP (Current Good Manufacturing Practices), the pressure and vacuum gauges as well as thermometer used for filling Medical Grade● Oxygen must have annual recalibration by a certified NIST traceable gauge● CryoVation provides customers with required documentation for your SOP manual traceable to N.I.S.T.

Medical Oxygen SupportServices

ph: 609.914.4792 ph: 609.914.4792

Model 5200 Servomex AnalyzerIdeal for the verification of oxygen concentration in industrial gas manufacture and oxygen transfilling. Easy to set up and operate. Meets all US FDA requirements for oxygen transfilling. Fully portable, with power supply included.

Regulators, fittings and hoses needed to calibrate analyzer and analyze CGA 540 and 870 style cylinders. Calibration gases not included.

Spare Set of GaugesIncludes back-up 6” Perma Cal and 4” McDaniels, gauges, Oxygen clean and certified, making annual recertification easier.

Analyzer Support PackageRegulators, fittings and hoses needed to calibrate analyzer and analyze CGA 540 and 870 style cylinders. Calibration gases not included

On-Site Compliance ServicePersonal, on-site compliance training by CryoVation’s FDA consultant. Includes personalized SOP manual and 2 days on site.

FDA Complianceph: 609.914.4792 ph: 609.914.4792

SequeFill™ Automated CO2 Cylinder Filling SystemProvides sequential, unattended filling of palletized cylinders, liquid cylinders or manifolded “packs.”

Fill palletized CO2 or N2O cylinders automatically

Reduces labor while providing consistent fill results

System includes the following:● Control console with Mitsubishi PLC, operator interface display station with data entry keypad, digital weight display, emegency stop button and keyed On/Off switch.● Platform scale, 5000-pound capacity (2272 kg.)● Retracto manifold with retractable fill hoses, individual air-actuated ball valves, air-actuated control valves vent, vacuum, fill and bypass), pressure transducer, vacuum switch safety relief valves and aluminum frame with customer decaled side panels● Variable frequency controller to adjust pump motor speed.

Also available for nitrous oxide service

SequeFill ph: 609.914.4792 ph: 609.914.4792

Self Contained Filling SystemFactory assembled and tested complete pumping unit. Available in flow rates of 2,500 to 10,000 SCFH and pressures to 6000 PSI.

Argon/Nitrogen/CO2/O2 service, complete with the following components:

● Cryogenic Pump ● Vacuum Pump ● Electrical Control Panel ● Vaporizer ● Duplex Control Panel ● Heavy Steel Skid ● Fill Manifolds

Built-in safety features include over-pressure, cavitation and under-temperature shut-off switches, high pressure safety relief valve and over-pressurization vacuum line safety relief.

Miscellaneousph: 609.914.4792 ph: 609.914.4792

CryoVation specializes in on-site installation of cylinder filling and piping systems, bulk tanks and medical van delivery systems. We also stock complete pump parts for

repairs and exchanges.

Let us help your plant stay operational!

Services include:● Cylinder filling equipment installation● Vacuum pump repair● Cryogenic pump repair● Pump exchanges● Cylinder filling equipment● Parts and supplies● Bulk tank installation● Technical assistance and advice● Medical office & hospital piping systems● Medical tank truck installation● Plant preventative maintenance● In-house technician training

Parts & Service ph: 609.914.4792 ph: 609.914.4792

ph: 609.914.4792 ph: 609.914.4792

online fast securewww.thecryoshop.com | info@thecryoshop.com

A division of CryoVation, LLCthecryoshop.com

“We could not have been happier with the installation process and how smoothly the transition went. We have been very pleased with CryoVation's equipment and their support throughout this project.” Trevor Kelsey Oxygen Service Company St. Paul, Minnesota

As our company grew and production cycles became more demanding, it became too expensive to continue purchasing filled cylinders. After hearing positive comments from other oxygen companies, CryoVation’s PPS-5000 liquid-to-gas fill system was purchased. CryoVation not only has a superior system that fills at twice the rate of other systems, but the company also provided expert installation and on-site training.

The investment has substantially paid off, dramatically dropping cylinder costs.The PPS system offers very minimal losses and has a flexible capacity, giving us the ability to increase production at any time. Ken Coombs First Community Care Multiple U.S. Locations

“It has been 9 months and the CryoVation equipment has proven to be safe, reliable and has increased our cylinder filling capabilities tremendously. The fill plant is the core of our operation and a substantial investment. Teaming up with CryoVation gives me the confidence we can handle growth successfully and see a return on that investment.” Jim Shultz, COO Jackson Welding & Gas Products Jackson, NY

“Once you get the recipes established, the computer controls the filling process. Our guys can move on to the next piece of work and concentrate on managing cylinder distribution and setting up for the next fill instead of being tied to the pumping process.” Mark Haun, President Haun Welding Supply Syracuse, NY

Testimonials ph: 609.914.4792 ph: 609.914.4792

OUR MISSION STATEMENTCryoVation is a custom manufacturer and installer of innovative cryogenic liquid and industrial gas cylinder filling and distribution systems. We are committed to improving the safety and efficiency of systems that transfer and package these resources. Partnering with our customers and associated product and service providers delivers mutually beneficial results for our companies, employees and their families.

COMMITED TOExcellent ValueProduct QualityRight Solutions

Personal Service

CRYOVATION IS A PROUD MEMBER OF / SUPPLIER FOR:

General Informationph: 609.914.4792 ph: 609.914.4792

Scan with your smart phone to get the latest deals and offers from CryoVation!

OUR STRENGTHS * FULL LINE MANUFACTURER OF CYLINDER FILLING EQUIPMENT

* ABILITY TO PROVIDE A COMPLETE SYSTEMS APPROACH

* CUSTOMIZED EQUIPMENT TAILORED TO YOUR SPECIFIC NEEDS

* TECHNICAL SUPPORT AVAILABLE NATIONWIDE

* LATEST ADVANCEMENTS IN FILLING TECHNOLOGY

www.cryovation.com I info@cryovation.com I 609.914.4792