Double Page Spread – Second Draft

I started creating my magazine front cover by opening Photoshop. Once I had opened

Photoshop I clicked ‘file’ ‘new’. I then changed the name of the file to ‘Front_Cover’. Next I

changed the size of what I wanted the page to be to international paper then a4 once I had done this I clicked ‘OK’ As this is my double page spread two A4 pages are needed so I

opened two A4 pages. Once I had done this I started by adding images to the page by

opening the image files.

Using the eraser tool changing the eraser to an eraser which had a faded edge to it. I wanted to use this type of eraser as then the images would be able to fade in more to the page and the image wouldn’t look as solid against the page. I opened up all the images I wanted erasing all of the background around the model. As the background of the images is white/grey as the two A4 pages are white they faded in quite well together. I was then happy with the images by just having the model of the image as the main subject. By just having the model it made the model stand out more and

attracted the reader straight to the model and not the background.

As the model was looking to the left hand side of her I didn’t want all the images in this direction so I decided to rotate the image in

order so it looked as if the model was looking at herself. I did this by rotating the image by

80 degrees.

I was then happy with the images and the way they were displayed on the page so I decided to add the headline going across the two double pages. Using the same font I had used

previously on the front cover and table of contents page of my magazine. I then adjusted the size of the font as the headline

needs to be the biggest font on the double page spread pages.

By duplicating the layer the two sets of

font were the same as they are all part of the headline making the

headline look like it was all one font in a straight line.

I then added a quote from the artist as when

doing research of double page spreads in

magazines they often had a quote

from the artist that was featured in the article in order to make the reader interested and read the article further. As the

headline is in black font, I made the quote in red to

make it stand out to the reader.

I decided to add an effect to the images so I did this by going to image, artists

and a new window opened. I then experimented the different effects

available and I decided to go with the black and white effect. I then applied this effect to both the images used on

my double page spread.

I then added all the text to the two pages about the article making the

quote line stand out again in red. By putting the quotes in red it made that particular text stand out to the reader so the reader would be able to read the quotes in both locations straight

away.

As there was a white space in the top right hand corner of my double page spread I decided to add a blue shape in the corner stating a competition in where they could meet the model that the article is featured on. By putting it in a bright blue shape it makes the

competition stand out against the other texts and more appealing towards the reader as they would be attracted straight away to the bright blue shape. I then added text to the shape stating they could meet the artist Lydjia.

Double Page Spread – Final Draft

I started creating my magazine front cover by opening Photoshop. Once I had opened Photoshop I clicked ‘file’ ‘new’. I then changed the name of the file to ‘Front_Cover’. Next I changed the size of what I wanted the page to be to international paper then a4 once I had

done this I clicked ‘OK’ As this is my double page spread two A4 pages are needed so I opened two A4 pages.

I then open the file where my images are saved choosing the pictures I want for my double page spread. The image then opened up in a new window so I dragged it onto the left hand side of the open page. As well as this I dragged it to the right hand side of the page as I wanted one picture covering those pages as the background. As the image came up larger than I wanted using CTRL T I was then able to adjust the image

size to the size that I wanted.

I then adjusted the size of the images on both of the left and the right side of the page making it look like one image together. By only using one image for my double page spread it makes it look more effective as it shows the reader straight away who the article is based on by them

just looking directly as the main image.Once I was happy with this I then added the headline of the double page spread using the same font I used previously for my front cover and

contents page. As I overlaid the fonts to make it look like a 3D effect I did the same for the headline as well.

I then added the rest of the text to the left hand side of the page of the headline of the article. As there is two models featured in the main image I made the model wearing red the main feature but her best friend the model lying down the Harley Davidson bike.

I didn’t want to use the original image so I decided to change the effects by going to image, artistic, coloured pencil. This then made the image go lighter than its original image. By having a lighter image I then able to add text overlaying the image and the reader will be able to read the text clearly. I then changed the brightness and sharpness of the image making the whole image look darker, I did this so that I was

able to add text on top as well as making the background of the image darker making the models stand out more in contrast to the background and Harley Davidson motorbike.

As my magazine is called Spotlight Sunday I decided to add lens flare on the bottom right hand corner of the page to make it look like a spotlight. I did this by going to image, lens flare and choosing the type of lens flare I wanted. I then decided to make the lens flare more

brighter than it originally was so I did this by clicking on curves and changing the brightness. The lens flare then looked like a spotlight and as my magazine is called Spotlight Sunday this related to the magazine.

As I was then happy with the image I decided to add the article text to the image of the interview between the artist and the interviewee. The white text being the artist that is being interviewed and red text being the questions asked by the interviewee. By having the two texts in

different colours it helps the reader identify the two different people.