Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in...
-
Upload
duongthien -
Category
Documents
-
view
219 -
download
0
Transcript of Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in...
![Page 1: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/1.jpg)
![Page 2: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/2.jpg)
5
Compact hydraulic winches for hoisting applications
BWBWFDELTABWSBWM
6
14
20
26
32
38
42
46
BW series
BWF series
DELTA series
BWS series
BWM series
installation
accessories
installation advice
![Page 3: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/3.jpg)
BWm
otor
-driv
en w
inch
es
![Page 4: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/4.jpg)
7
BW SERIES
BW series of lifting winchesIn this series of high performance and compact hydraulic
lifting winches all the mechanical and hydraulic parts are
totally integrated in the winding drum. All the winches in
this series are supplied with a fixed displacement, axial
piston hydraulic motor in addition to a load descent
control valve and a brake opening valve integrated into
the motor. With such a design configuration, the operator
can change the rope winding direction quickly and easily
just by turning the load control valve. The oversized
negative multi-disk brake is designed to withstand
extremely high braking torques.
Installation is even easier thanks to the exclusive design
of the side supports in the square-frame versions.
Capacity ranges between 1,250 daN and 7,500 daN of pull
on the 1st rope layer while a wide assortment of
accessories is also available, including pressure
rollers, strain gauge pulling limiters, revolution
counters, marine seals, ropes, hooks and
pulleys.
Newperfo
rman
cerat
ing
![Page 5: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/5.jpg)
8
BW SERIESHydraulic lifting winch
dimensions in mm
model A B D E F G H
BW 850 175 260 58,5 170 48 80 55
BW 900 175 260 58,5 170 48 80 55
BW 900 L 176 266 45,5 350 45,5 80 55
BW 1350 200 310 63 180 50,5 90 64
BW 1500 200 310 63 180 50,5 90 64
BW 1500 L 216 326 45 332 45 90 64
BW 1950 LT 250 380 69,5 232 64 100 64
BW 1950 VL 250 380 69,5 232 64 100 64
BW 2250 282 430 75,5 250 70,5 110 74
BWC 3000 282 430 75,5 250 70,5 110 74
H
P
P
R
n°32 ø M
L
==
G
N
S
V1 V2
DR
![Page 6: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/6.jpg)
9
BW SERIES
L M N O P R S T V1/V2 DR OIL
280 12 280 220,5 160/225 140 280 329 3/4-16 UNF 1/2-20 UNF 3/8 GAS
280 12 280 220,5 160/225 140 280 329 3/4-16 UNF 1/2-20 UNF 3/8 GAS
280 12 280 388 160/225 140 280 479,5 3/4-16 UNF 1/2-20 UNF 3/8 GAS
330 14 330 235,5 200/270 165 330 346 7/8-14 UNF 9/16-18 UNF 3/8 GAS
330 14 330 235,5 200/270 165 330 346 7/8-14 UNF 9/16-18 UNF 3/8 GAS
330 14 330 364 200/270 165 330 474,5 7/8-14 UNF 9/16-18 UNF 3/8 GAS
400 16 400 296,5 255/335 200 400 417,5 7/8-14 UNF 9/16-18 UNF 1/2 GAS
400 16 400 296,5 255/335 200 400 417,5 7/8-14 UNF 9/16-18 UNF 1/2 GAS
450 18 450 319 285/375 225 450 464 7/8-14 UNF 3/4-16 UNF 1/2 GAS
450 18 450 319 285/375 225 450 464 7/8-14 UNF 3/4-16 UNF 1/2 GAS
ED F
T
ø B
ø A
O
OIL
![Page 7: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/7.jpg)
10
BW SERIESHydraulic lifting winch
dimensions in mm
model A B D E F G H
BW 3500 360 525 89 368 59,5 120 74
BW 4100 360 525 89 368 59,5 120 74
BW 5200 360 525 89 368 59,5 120 74
BW 5200 L 360 525 89 612 59,5 120 74
L
H
S
R
N
G
P
Pn°8 ø M
==
DR
V1 V2
OIL
OIL OIL
OIL
![Page 8: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/8.jpg)
11
BW SERIES
L M N O P R S T V1/V2 DR OIL
630 21 540 330 400/470 267,5 420 606,4 7/8-14 UNF 3/4-16 UNF 1/2 GAS
630 21 540 330 400/470 267,5 420 606,4 7/8-14 UNF 3/4-16 UNF 1/2 GAS
630 21 540 330 400/470 267,5 420 606,4 7/8-14 UNF 3/4-16 UNF 1/2 GAS
630 21 540 330 400/470 267,5 420 850,4 7/8-14 UNF 3/4-16 UNF 1/2 GAS
D E F
T
ø B
ø A
O
![Page 9: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/9.jpg)
12
BW SERIESproduct range
Maximum pull on 1st layer
Maximum pull on 4th layer
Maximum lifting speed on 1st layer
Maximum lifting speed on 4th layer
Rope diameter (1)
Rope capacity on 4th layer
Gearing – down ratio
Motor displacement
Lifting pressure
Maximum pump delivery
daN
daN
m/min
m/min
mm
m
cm3/rev
bar
l/min
BW BW BW BW850 900 900L 1350
1250 1350 1350 2000
945 1020 1020 1500
45 40 40 40
60 53 53 53,5
10 10 10 12
43 43 91 43,2
32,5 32,5 32,5 31,2
18 18 18 32
150 160 160 160
190 200 200 200
48 42 42 65
0,5 0,5 0,5 0,85
54,5 54,5 65 85
Starting lifting pressure (2)
bar
Oil quantity l
Weight kg
(1) The rope diameters indicated in the catalogue are indicative. Consult the catalogues of the rope manufacturers and refer to current standards to confirm the safety coefficient in relation to the resistance class.
(2) This is the value of the normal lifting pressure plus an overpressure of approximately 20-30% used for the initial lifting detachment (it is recommended to calibrate the winch circuit maximum value about 10-15%higher than the initial lifting pressure value).
![Page 10: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/10.jpg)
13
BW BW BW BW BW BWC BW BW BW BW1500 1500L 1950LT 1950VL 2250 3000 3500 4100 5200 5200L
2300 2300 3100 3100 3400 4000 4800 6100 7500 7500
1715 1750 2350 2350 2600 3060 3730 4635 5700 5700
35 35 37 48 35 25 50 40 30 30
47 46 48,8 63,3 45,5 32,5 62,8 51,4 39,5 39,5
12 12 14 14 15 15 16 18 20 20
43,2 87,2 59 59 66,5 66,5 115 104 94,5 161
31,2 31,2 49,5 38,2 38,2 38,2 49,8 48 56,8 56,8
32 32 32 32 64 64 64 64 64 64
180 195 190 248 155 180 210 280 290 290
230 240 240 315 195 225 265 350 365 365
55 51 75 75 100 70 150 115 96 96
0,85 0,85 1,25 1,25 2 2 3,5 3,5 3,5 3,5
85 120 145 145 205 205 400 410 420 470
![Page 11: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/11.jpg)
BWFm
otor
-driv
en w
inch
es
![Page 12: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/12.jpg)
15
BWF SERIES
BWF series of lifting winchesDerived from the BW series, these hydraulic winches,
which are designed to operate in restricted spaces, such
as in the rear cabin on truck-mounted cranes, are
recognised for their high performance and compact
dimensions. Thanks to the exclusive design and complete
lack of protrusions and overhangs, installation is
extremely easy. All the winches in this series are supplied
with a fixed displacement, axial piston hydraulic motor
and a load descent control valve integrated into the motor.
With such a design configuration, the operator can change
the rope winding direction very quickly just by turning the
valve. The oversized negative multi-disk brake is designed
to withstand extremely high braking torques.
Capacity ranges between 1,150 daN and 3,800 daN of pull
on the 1st rope layer while a wide assortment of
accessories is also available, including maximum and
minimum rope-on-drum capacity control systems,
pressure rollers and pulling limiters.
![Page 13: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/13.jpg)
16
BWF SERIESHydraulic lifting winch
dimensions in mm
model A B D E F G H
BWF 1000 175 260 25,5 170 42,5 60 55
BWF 1500 200 310 51 180 49 70 64
BWF 2000 250 380 51 240 55,5 70 64
BWF 3000 295 430 64 294 59 70 74
S
G
N
= =
R
n°4/8 Ø MH
P
L
V2 V1
DR
![Page 14: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/14.jpg)
17
BWF SERIES
L M N O P R S T V1/V2 DR OIL
328 15 260 170 200 151 261 306 3/4-16 UNF 1/2-20 UNF 3/8 GAS
411 15 375 150 305 174,5 304,5 345 7/8-14 UNF 9/16-18 UNF 3/8 GAS
464 15 390 200 320 226 406 413 7/8-14 UNF 9/16-18 UNF 1/2 GAS
542 19 470 265 400 245 404,5 499,5 7/8-14 UNF 9/4-16 UNF 1/2 GAS
O
TE FD
ø A ø B
OIL
![Page 15: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/15.jpg)
18
BWF SERIESproduct range
daN
daN
m/min
m/min
mm
m
cm3/rev
bar
l/min
l
kg
BWF BWF BWF BWF1000 1500 2000 3000
1150 2000 2600 3800
915 1556 2040 3000
48 40 45 44
61 52 57,5 56
8 10 12 14
53 54 74,5 87
32,5 31,2 38,2 38,2
18 32 32 64
140 200 205 180
175 250 255 225
55 65 75 125
0,5 0,85 1,25 2
55 110 145 250
bar
(1) The rope diameters indicated in the catalogue are indicative. Consult the catalogues of the rope manufacturers and refer to current standards to confirm the safety coefficient in relation to the resistance class.
(2) This is the value of the normal lifting pressure plus an overpressure of approximately 20-30% used for the initial lifting detachment (it is recommended to calibrate the winch circuit maximum value about 10-15%higher than the initial lifting pressure value).
Maximum pull on 1st layer
Maximum pull on 4th layer
Maximum lifting speed on 1st layer
Maximum lifting speed on 4th layer
Rope diameter (1)
Rope capacity on 4th layer
Gearing – down ratio
Motor displacement
Lifting pressure
Maximum pump delivery
Starting lifting pressure (2)
Oil quantity
Weight
![Page 16: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/16.jpg)
19
![Page 17: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/17.jpg)
DELTAm
otor
-driv
en w
inch
es
![Page 18: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/18.jpg)
21
DELTA SERIES
DELTA series of lifting winchesEconomical, simple to use and easy to install in any
position, with any rope delivery configuration, and even in
restricted areas.
All the products in this series are supplied with a
hydraulic motor with a fixed displacement orbital motor,
monoblock load descent control valve and a brake closing
valve integrated into the motor. This guarantees safe
control of the load descent speed and engages the brake
while the winch is not moving. The negative hydraulic
parking brake is integrated in the drum and the brake is
opened only when the motor contains pressurised oil, thus
guaranteeing absolute safety.
Capacity ranges between 500 daN and 3,500 daN of pull
on the 1st rope layer while a wide assortment of
accessories is also available, including internal drainage
systems, electromechanical maximum and minimum rope
winding control, rope pressure rollers, electronic strain
gauges, grooved drums, ropes, hooks and pulleys.
![Page 19: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/19.jpg)
22
DELTA SERIESHydraulic lifting winch
dimensions in mm
model A B D E F G H
DW 050 146 220 28 110 47 35 108
DW 090 167 258 31,3 174 26 40 108
DW 120 202 312 36,6 187 22,4 60 108
DW 150 202 312 36,6 187 22,4 60 108
DW 200 243 375 38,5 253 22,2 50 75
DW 250 243 375 38,5 253 22,2 50 75
DW 300 296 454 45,5 244 22,4 65 85
DW 350 296 454 45,5 244 22,4 65 85
H
O
n°4 ø M
L
R
S
N
G = =
V1 V2
![Page 20: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/20.jpg)
23
DELTA SERIES
L M N O P R S T V1/V2 DR OIL
218 11 215 140 180 115 238 260 3/8 GAS – 1/4 GAS
295 15 290 170 250 140 285 283 3/8 GAS – 1/4 GAS
315 15 310 170 250 174,5 350 318 3/8 GAS – 1/4 GAS
315 15 310 170 250 174,5 350 318 3/8 GAS – 1/4 GAS
405 16,5 400 250 350 192 403 432 3/4 GAS 1/4 GAS 3/8 GAS
405 16,5 400 250 350 192 403 441 3/4 GAS 1/4 GAS 3/8 GAS
425 17 415 250 350 245 497 440 3/4 GAS 1/4 GAS 3/8 GAS
425 17 415 250 350 245 497 440 3/4 GAS 1/4 GAS 3/8 GAS
E DF
T
ø B
ø A
O
OIL
![Page 21: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/21.jpg)
24
DELTA SERIESproduct range
daN
daN
m/min
m/min
mm
m
cm3/rev
bar
bar
l/min
l
kg
(1) The rope diameters indicated in the catalogue are indicative. Consult the catalogues of the rope manufacturers and refer to current standards to confirm the safety coefficient in relation to the resistance class.
(2) This is the value of the normal lifting pressure plus an overpressure of approximately 20-30% used for the initial lifting detachment (it is recommended to calibrate the winch circuit maximum value about 10-15%higher than the initial lifting pressure value).
Maximum pull on 1st layer
Maximum pull on 4th layer
Maximum lifting speed on 1st layer
Maximum lifting speed on 4th layer
Rope diameter (1)
Rope capacity on 4th layer
Gearing – down ratio
Motor displacement
Lifting pressure
Maximum pump delivery
Starting lifting pressure (2)
Oil quantity
Weight
![Page 22: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/22.jpg)
25
DW DW DW DW DW DW DW DW050 090 120 150 200 250 300 350
500 900 1200 1500 2000 2500 3000 3500
405 705 935 1170 1560 1950 2330 2720
41 35 45 30 35 30 50 50
51 44,5 58 38,5 45 38,5 64,5 64,5
6 8 10 10 12 12 14 14
36 50 51 51 73 73 71 71
1 4,87 4,57 4,57 6,25 6,25 6,25 6,25
250 100 160 200 200 250 315 315
120 120 130 130 150 150 175 205
140 140 155 155 180 180 210 245
25 39 62 51 68 73 126 126
0,15 0,35 0,7 0,7 2,3 2,3 3 3
27 40 50 50 130 130 160 160
![Page 23: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/23.jpg)
BWSm
otor
-driv
en w
inch
es
![Page 24: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/24.jpg)
27
BWS SERIES
BWS series of lifting winchesAlthough these winches are derived from the BW series,
their triangular design makes them lighter and even more
compact. All the winches in this series are supplied with
an axial piston hydraulic motor in addition to a load
descent control valve integrated into the motor. With such
a design configuration, the operator can change the rope
winding direction quickly and easily just by changing the
position of the valve.
The BWS series of winches is also equipped with a
negative multi-disk brake sized in accordance with safety
factors complying with the highest international
standards.
Capacity ranges between 1,350 daN and 3,100 daN of pull
on the 1st rope layer.
A wide assortment of accessories is also available,
including pressure rollers, maximum and minimum rope-
on-drum capacity control, etc.
new200
4se
ries
![Page 25: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/25.jpg)
28
BWS SERIESHydraulic lifting winch
dimensions in mm
model A B D E F G H
BWS 1350 175 260 53,5 170 42,5 45 55
BWS 2300 200 310 59 180 46 60 64
BWS 3100 250 380 65,5 232 58 70 64
P
R
L
H
n°4 ø M
= =
G
S
N
V1
DR
V2
![Page 26: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/26.jpg)
29
BWS SERIES
L M N O P R S T V1/V2 DR OIL
295 15 295 170 250 135 285 331 3/4-16 UNF 1/2-20 UNF 3/8 GAS
410 17 410 190 350 195 370 352 7/8-14 UNF 9/16-18 UNF 3/8 GAS
420 17 420 250 350 225 435 423,5 7/8-14 UNF 9/16-18 UNF 1/2 GAS
O
EF D
T
ø Aø B
OIL
![Page 27: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/27.jpg)
30
BWS SERIESproduct range
daN
daN
m/min
m/min
mm
m
cm3/rev
bar
bar
l/min
l
kg
BWS BWS BWS1350 2300 3100
1350 2300 3100
1020 1715 2350
40 35 37
53 47 49
10 12 14
43 43,2 59
32,5 31,2 49,5
18 32 32
150 180 190
190 230 240
50 55 75
0,5 0,85 1,25
49 79 137
(1) The rope diameters indicated in the catalogue are indicative. Consult the catalogues of the rope manufacturers and refer to current standards to confirm the safety coefficient in relation to the resistance class.
(2) This is the value of the normal lifting pressure plus an overpressure of approximately 20-30% used for the initial lifting detachment (it is recommended to calibrate the winch circuit maximum value about 10-15%higher than the initial lifting pressure value).
Maximum pull on 1st layer
Maximum pull on 4th layer
Maximum lifting speed on 1st layer
Maximum lifting speed on 4th layer
Rope diameter (1)
Rope capacity on 4th layer
Gearing – down ratio
Motor displacement
Lifting pressure
Maximum pump delivery
Starting lifting pressure (2)
Oil quantity
Weight
![Page 28: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/28.jpg)
31
![Page 29: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/29.jpg)
BWMm
otor
-driv
en w
inch
es
![Page 30: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/30.jpg)
33
BWM SERIES
BWM series of lifting winchesThese hydraulic winches are simple to use, compact and
extremely lightweight. The BWM series of winches is
designed for applications requiring a 1st layer pulling
strength of between 500 daN and 1,500 daN and wherever
very compact overall dimensions is a real must.
Typical examples of such applications include winches on
service cranes (both land and sea) and auxiliary winches
for small drilling units.
Thanks to the orbital hydraulic motor with high-pressure
seals, these winches are very easy to install and almost
never require a motor drainage tube.
In line with Brevini Winches’ philosophy, the BWM winches
are also equipped with a load control valve and a negative
multi-disk brake to provide maximum safety and to ensure
compliance with the strictest international standards.new
200
4se
ries
![Page 31: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/31.jpg)
34
BWM SERIESHydraulic lifting winch
dimensions in mm
model A B D E F G H
BWM 005 155 230 35 152 27 40 108
BWM 008 155 230 35 152 27 40 108
BWM 010 155 230 35 152 27 40 108
BWM 012 155 230 35 152 27 40 108
BWM 018 178 260 38 170 35 50 108
HL
P
n°4 ø M
R
==
N
G
S
V2 V1
![Page 32: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/32.jpg)
35
BWM SERIES
L M N O P R S T V1/V2 DR OIL
262 11 232 160 192 120 220 293 3/8 GAS – 3/8 GAS
262 11 232 160 192 120 220 295 3/8 GAS – 3/8 GAS
262 11 232 160 192 120 220 298 3/8 GAS – 3/8 GAS
262 11 232 160 192 120 220 303 3/8 GAS – 3/8 GAS
300 13 285 170 236 135 250 350 3/8 GAS - 3/8 GAS
D
T
ø B
ø A
O
E F
OIL
![Page 33: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/33.jpg)
36
BWM SERIESproduct range
daN
daN
m/min
m/min
mm
m
cm3/rev
bar
bar
l/min
l
kg
BWM BWM BWM BWM BWM005 008 010 012 018
500 800 1100 1300 1500
435 670 920 1100 1250
35 21 17 14 19
40 25 20,3 16,7 23
6 8 8 8 10
39,5 30,2 30,2 30,2 32
5 5 5 5 5,14
50 80 100 130 160
120 120 135 120 140
155 155 170 155 175
18 18 18 18 30
0,3 0,3 0,3 0,3 0,5
40 40,3 40,8 41,2 55
(1) The rope diameters indicated in the catalogue are indicative. Consult the catalogues of the rope manufacturers and refer to current standards to confirm the safety coefficient in relation to the resistance class.
(2) This is the value of the normal lifting pressure plus an overpressure of approximately 20-30% used for the initial lifting detachment (it is recommended to calibrate the winch circuit maximum value about 10-15%higher than the initial lifting pressure value).
Maximum pull on 1st layer
Maximum pull on 4th layer
Maximum lifting speed on 1st layer
Maximum lifting speed on 4th layer
Rope diameter (1)
Rope capacity on 4th layer
Gearing – down ratio
Motor displacement
Lifting pressure
Maximum pump delivery
Starting lifting pressure (2)
Oil quantity
Weight
![Page 34: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/34.jpg)
37
![Page 35: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/35.jpg)
38
WINCHINSTALLATION
01
recommended hydraulic layout with motor drainage directly into tank
hoisting motion code
02
01
02
hoisting motion code
BW
serie
s
C3
C3
P
A
T
B
V1V2 DR
BW850
BW1350BW900LBW900
BW5200L
BW5200
BW4100
BW3500
BW1500L
BW2250BW1950VLBW1950LT
BW1500
BWC3000
BW4100
BW5200
BW5200L
BW3500
BWC3000
BW1950VLBW2250
BW1950LTBW1500L
BW1350
BW1500
BW900BW900L
BW850
P
V2
A
V1
T
B
DR
![Page 36: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/36.jpg)
02hoisting motion code
01
02
01
hoisting motion code
WINCHINSTALLATION
39
recommended hydraulic layout with motor drainage directly into tank
BWFBWSse
ries
DR
B
T
V2
A
P
V1
B
DR
T
V1
P
V2
A
BWF1000
BWF1500
BWF2000
BWF3000
BWS1500
BWS2100
BWS2500
BWS3500
BWS3500
BWS2500
BWS2100
BWS1500
BWF3000
BWF2000
BWF1500
BWF1000
![Page 37: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/37.jpg)
40
WINCHINSTALLATION
01
recommended hydraulic layout with motor drainage directly into tank
hoisting motion code
DW
serie
s
DW200
DW250
DW250
DW200
DW350
DW300
DW300
DW350
V1V2
Dr
V1 V2
Dr
V1 V2
Dr
Dr
V1V2
V2V1
A B
P T
DR
V2V1
A B
P T
DR
02
01
02
hoisting motion code
![Page 38: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/38.jpg)
01hoisting motion code
WINCHINSTALLATION
41
recommended hydraulic layout
DWBWMse
ries
02
01
02
hoisting motion code
V2
B
T
A
P
V1
DW090
DW050
DW150
DW120
BWM005
BWM010
BWM008
BWM012
BWM018
BWM018
DW150
DW120
DW090
DW050
BWM005
BWM008
BWM010
BWM012
B
V1
A
TP
V2
V2
V1
V1
V2
V2 V1
V1 V2
![Page 39: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/39.jpg)
42
ACCESSORIES
grooves marine seals
pressure roller withelectric min. + max.
hydraulic pressure rollerwith min. and max. control
fitted for drum revolutioncounter shaft
load cell/strain gauge
![Page 40: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/40.jpg)
ACCESSORIES
43
closed circuit winch without frame
rope hooks
winch cablesdifferent rope sizes are available
some cross-sections
![Page 41: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/41.jpg)
44
ACCESSORIES
BW BW BW BW BW BW BW BW BW BWC BW BW BW BW850 900 900L 1350 1500 1500L 1950LT 1950VL 2250 3000 3500 4100 5200 5200L
WINCH WITHOUT FRAME
GROOVING
LEBUS GROOVING
MARINE SEALS
PRESSURE ROLLER
PRESSURE ROLLER WITH 1ELECTRIC MIN. MICROSWITCH
PRESSURE ROLLER WITH 2 ELECTRIC MIN. AND MAX. MICROSWITCHES
PRESSURE ROLLER WITH 1HYDRAULIC MIN. MICROSWITCH
PRESSURE ROLLER WITH 2 HYDRAULIC MIN. AND MAX. MICROSWITCHES
FITTED FOR REVOLUTION COUNTER SHAFT
LOAD CELL + ELECTRIC BOX
STANDARD PAINTING
MARINE PAINTING, CYCLE C5
ROPE ASSEMBLY
CLOSED CIRCUIT
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ▲ ▲ ▲ ▲
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
▲ STANDARD
■ AVAILABLE
◆ NOT AVAILABLE
● ON REQUEST
![Page 42: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/42.jpg)
ACCESSORIES
45
BWF BWF BWF BWF DW DW DW DW DW DW DW DW BWM BWM BWM BWM BWM BWS BWS BWS1000 1500 2000 3000 050 090 120 150 200 250 300 350 005 008 010 012 018 1350 2300 3100
■ ■ ■ ■ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ● ● ● ● ● ■ ■ ■
■ ■ ■ ■ ◆ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ◆ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ◆ ◆ ◆ ◆ ◆ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ● ● ● ● ■ ■ ■ ■ ● ● ● ● ● ■ ■ ■
![Page 43: Compact hydraulic winches for hoisting applications..\sln\lureye... · piston hydraulic motor in addition to a load descent control valve and a brake opening valve integrated into](https://reader031.fdocuments.us/reader031/viewer/2022022601/5b4ca7107f8b9a691e8d7737/html5/thumbnails/43.jpg)
46
INSTALLATIONADVICE
A The winch support frame must be fixed securely to a good level surface of adequatethickness. Use quality fixing nuts and bolts with correct torque settings.
B A and B ports of the control valve must be open to tank while the control valve is in theneutral position. This prevents any build up of hydraulic pressure which could cause thenegative brake to accidentally open.
C The supply, return and drain tubing must all be of adequate internal dimension tosupport the max. working and drainage flow rates
D Drainage tubing must always flow directly to the oil reservoir.
E Standard hoisting direction is “01”. For “02” hoisting direction please specify whenordering.
F The Brevini Winches winches are designed to hold 4 layers of cable of which 5 windingsever-present on the 1st layer.
G Carefully follow the cable manufacturers instructions and respect all guidelines andlaws in force.
H For hydraulic oil use mineral oils with wear resistant additives, type HLP (DIN 51524) orHM (ISO 6743/4) and viscosity according to ISO VG46. Reccomended filtration 10µmabsolute or ß10-75.
I For the Brevini Winches motorized winches, use gear oil with E.P. characteristicsaccording to ISO VG150 or SAE 80W/90. For applications exposed to extremetemperature changes, use a syntetic oil with E.P. properties, with minimum viscosityindex of 165 or the class VG 150 - VG 220.
L The winches manufactured by Brevini Winches are not intended to lift people.
M It is reccomended to run the machinery without load for 5÷10 minutes at start-up.