Circontrol Circarlife Catalogue 2013 2014 - EV Charging Stations
-
Upload
moises-barea -
Category
Technology
-
view
181 -
download
5
description
Transcript of Circontrol Circarlife Catalogue 2013 2014 - EV Charging Stations
CirCarLife - Catalogue 2013-2014
INDEX
E INTELLIGENT RECHARGING SOLUTIONS FOR ELECTRIC VEHICLES
E1 INTRODUCTION5
E1.1 CHARGING MODES 5
E1.2 CONNECTOR TYPES 6
E2 WALLBOX SMART CHARGING SYSTEM FOR CAR PARKS AND COMMUNAL BLOCKS
7
E2.1 BASIC SERIES 8
E2.2 SMART SERIES 10
E3 POST CHARGING SYSTEM FOR CITY STREETS AND INTER-CITY ROADS
12
E3.1 BASIC CHARGING POSTS 13
E3.2 POST URBAN SMART SERIES 15
E3.3 SMART CHARGING POSTS SERIES 17
E3.4 TWO WHEELS VEHICLE CHARGING SYSTEM 19
E4 MULTIPOINT SYSTEM 21
E4.1 MASTER CONTROLLER 22
E4.2 SLAVE WALLBOX 24
E5 QUICK CHARGING SYSTEM 26
E5.1 QUICK CHARGING ADVANCE SYSTEM 27
E5.2 QUICK CHARGING COMPACT SYSTEM 29
E5.3 QUICK CHARGING COMBO 2 CCS SYSTEM 31
E6 MANAGEMENT AND CONTROL SOFTWARE 33
E7 ACCESSORIES 34
E7.1 SMART STANDALONE DATA CENTRALISING UNIT 34
E7.2 COMMUNICATION ACCESSORIES 35
E7.3 PRE-PAYMENT SOLUTIONS 36
E8 TECHNICAL FEATURES 37
ULTRA-FAST CHARGING
SYSTEM
ELECTRIC VEHICLE CHARGING
IN CITY STREETS
ELECTRIC VEHICLE
CHARGING IN PUBLIC CAR
PARKS (INDOORS)
ELECTRIC VEHICLE
CHARGING IN COMMUNAL
BLOCKS
ELECTRIC VEHICLE
CHARGING IN CAR PARKS(OUTDOORS)
4
1
CIRCONTROL - CirCarLife
5
.Catalogue 2013-2014
E1 INTRODUCTION
E1.1 CHARGING MODESThe EV charging process is regulated by the IEC 61851 and IEC 62196 international standards. These standards de�ne the different charging modes and the type of connection required to charge EVs. All CirCarlife products have been created and designed in compliance with the strictest European regulations and standards, prioritising the end user’s safety. CIRCONTROL is a leading and constantly innovating company committed to developing its products and adapting them to market requirements.
charging modes and the type of connection required to charge EVs. All CirCarlife products have been created and designed in compliance with the strictest European regulations and standards, prioritising the end user’s safety. CIRCONTROL is a leading and constantly innovating company committed to developing its products and adapting them to market requirements.
Standard electrical network connector, non-speci�c for EVs.
Slow AC charging.
The installation must be protected with circuit breakers and earth leaka-ge protection elements.
Maximum 16 A per phase (3.7 kW - 11kW).
Technical features
Mode 1
Standard electrical network connector, non-speci�c for EVs.
Slow AC charging.
The installation must be protected with circuit breakers and earth leaka-ge protection elements.
Maximum 32 A per phase (3.4 kW - 22kW).
Special cable with an intermediate electronic device, with a control and protection pilot function.
Technical features
Mode 2
Electrical network connector, speci�c for EVs.
Slow or semi-fast charging in single or three-phase installations.
Protection elements included in the special infrastructure for EVs.
Maximum 64 A per phase (14.8 kW - 43 kW).
Direct connection of the EV to the charging unit.
Technical features
Mode 3
Electrical network connector, speci�c for EVs.
Quick DC charging.
Charging station, exclusively used for EVs.
Maximum 400 A per phase (50 kW - 150 kW).
Control and protection elements installed in the infrastructure.
Technical features
Mode 4
CirCarLifeIntelligent recharging solutions for electric vehicles
1
CIRCONTROL - CirCarLife
6
.Catalogue 2013-2014.Catalogue 2013-2014
E1.2 TYPES OF CONNECTORS
SAE J1772 Regulation.
5 pins (L1/N, PE, CP, CS).
Maximum 230Vac 32A single-phase (7.3kW).
Indirect connection between the EV and DC supply point. Control and protection elements installed in the infrastructure.
7 pins (L1, L2, L3, N, PE, CP, PP).
Maximum 400Vac 32A three-phase (21kW).
7 pins (L1, L2, L3, N, PE, CP, PP).
Maximum 400Vac 63A three-phase (43kW).
Type 1
Type 2
Type 3
ChaDeMo
DC connector of the combined AC/DC plug-in charging system:The inlet of the plug-in connector can also be used for AC voltage charging with a type 2 AC plug. One inlet is required on the vehicle side for AC and DC charging.
Combined Charging System
1
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
7
2
Different types of car parks have different electric vehicle charging features and requirements. That is why different electric vehicle charging equipment solutions are required for each type of installation.
Circontrol offers a variety of different solutions, adapted to each type of car park, whether in single-family homes, communal residence car parks, public and shopping mall car parks, hotels, etc. These solutions consist of devices that can function standalone and devices with com-munication ability which enable speci�c functions via software adapted to each type of installation.
E2. WALLBOX CHARGING SYSTEM FOR CAR PARKSAND COMMUNAL BLOCKS
BASIC Series SMART Series
Description
Charge Status Light Indicator
RFID Communication Metering
BASIC - - -
SMART
Product Range - WallBox charging
CirCarLifeIntelligent recharging solutions for electric vehicles
CIRCONTROL - CirCarLife
8
.Catalogue 2013-2014
2
E2.1 BASIC SERIESWallBox charging system for domestic use
The Wall Box Basic has been specially designed for do-mestic use on indoor or outdoor residential garages. Compatible with all hybrid plug in or pure electric cars with an easy installation ondo your garage wall. Capable to charge complying with safety regulations your electric car during overnight meanwhile your fa-mily sleep and be ready for your next day journey.
With the auto start mode 3 system and with the three light colour indicators located in the wall box you can easily charge and monitor your electrical vehicle charge.
Description
Self-extinguishing ABS plastic casing. Protection degree : IP54.
Compatible with Mode 3 IEC 61851-1. (Certi�ed).
Type I, Type II, Type III or Schuko connectors, in compliance with the IEC
Type I support, cable and connector.
Simple installation, 4-point wall �xing.
Self-extinguishing ABS plastic casing.
Charge status light indicator (blue, green and red).
Customized paint housing and logos.
Technical features
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
9
2
TypeNum.
Sockets
Input Supply Voltage
Output Power Output Current Charge systemTechnical Features
PageSocket A Socket B Socket A Socket B Socket ASocket
B
CCL-WBC
1 230 Vac 3,6 kW - 16 A -Mode 3 & Type 1
- 38
CCL-WBC 32
1 230 Vac 7,2 kW - 32 A -Mode 3 & Type 1
- 39
CCL-WB MIX
2230
Vac/400Vac*3,6kW
7,2 kW / 21 kW
16 A 32 AMode 3 & Type 2
Mode 1Schuko
40
CCL-WBM
1230
Vac/400Vac*7,2 kW/21kW* - 32 A -
Mode 3 & Type 2
- 41
CCL-WBMC
1230
Vac/400Vac*7,2 kW/21kW* - 32 A -
Mode 3 & Type 2
- 42
Unit dimensions and cable support
320mm
51mm
225mm 109mm
125mmWALLBOX CHARGING
CONNECTION CABLE SUPPORTINCLUDED ONLY WBC SERIES
* Depends of local instalation WB accepts both
Technical Features
CIRCONTROL - CirCarLife
10
.Catalogue 2013-2014
2
E2.2 SMART SERIESWallBox charging system for car parks and communal blocks
Description
The Wall Box smart was specially designed for public indoor-outdoor car park installations as well as multi-family homes, shopping malls, municipalities, private companies, etc.
These series provide multiple power options and meet all ve-hicles standards to charge whole hybrid plug in and pure electrical vehicles existing in the market. The station incor-porates display, RFID (card reader), smart metering and com-munication capabilities to be adapted in an innovative smart grid systems.
Protection degree : IP54.
Compatible with Mode 3 IEC 61851-1. (Certi�ed).
Type I, Type II, Type III or Schuko connectors, in compliance with the IEC
Charge status light indicator (blue, green and red).
Simple installation, 4-point wall �xing.
Self-extinguishing ABS plastic casing.
Type I support, cable and connector. Type 2 connector lock.
Customised color housing and logos.
Technical feature
Backlight LCD display.
Integrated energy measurement (Class 1 meter).
Pre-payment and access control with RFID cards.
Ethernet communications and data storage.
3G and GPRS communications (optional).
SCADA control software connection.
Integration with other software (OCPP, XML, ...).
Unit dimensions and cable support
320 mm
51 mm
225 mm 109 mm
125 mmWALLBOX CHARGING
CONNECTION CABLE SUPPORTINCLUDED ONLY WBC SERIES
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
11
2
CCL-WBC SMART
Num. Sockets
Input Supply Voltage
Output Power Output Current Charge systemTechnical Features
PageSocket A Socket B Socket A Socket B Socket A Socket B
CCL-WBC SMART
1 230 Vac 3,6 kW _ 16 A _Mode 3Type 1
_ 43
CCL-WBC 32 SMART
1 230 Vac 7,2 kW _ 32 A _Mode 3Type 1
_ 44
CCL-WBM SMART
1 230 Vac 7,2 kW _ 32 A _Mode 3Type 2
_ 45
CCL-WBS SMART
1 230 Vac 3,6 kW _ 16 A _Mode 1Shucko
_ 46
CCL-WB MIX SMART
2 230 Vac 7,2 kW 3,6 kW 32 A 16 AMode 3Type 2
Mode 1Shucko
47
CCL-WB2M SMART
2 230 Vac 7,2 kW 7,2 kW 32 A 32 AMode 3Type 2
Mode 3Type 2
48
CCL-WBM SMART TRI
1 400 Vac 22 kW _ 32 A _Mode 3Type 2
_ 49
CCL-WB MIX SMART TRI
2 400 Vac 22 kW 3,6 kW 32 A 16 AMode 3Type 2
Mode 1Shucko
50
CCL-WB2M SMART TRI
2 400 Vac 22 kW 22 kW 32 A 32 AMode 3Type 2
Mode 3Type 2
51
Technical Features
CirCarLife
12
.Catalogue 2013-2014
3
CirCarLifeIntelligent recharging solutions for electric vehicles
Charging systems for city streets require very speci�c features, especially in terms of robustness, through being exposed to variable environmental conditions, including acts of vandalism. Besides the- se special re-quirements, they should also have the adequate electric safety measures for equipment with characteristics such as these.
With this in mind, circontrol provides innovative smart charging so- lutions that are adapted to the special conditions of city streets for all sorts of two and four-wheel vehicles, according to the latest in- ternational charging regulations and offering a variety of solutions for each type of installation.
E3. CHARGING SYSTEMS FOR CITY STREETS AND INTER-CITY ROADS
BASIC Series 2-WHEELVEHICLES Series
Description
Product Range - POST charging
SMART Series
RFIDDisplay for credit
monitoringCommunication Mode 3 Socket
BASIC SERIES
-
SMART URBAN SERIES
SMART SERIES
2-WHEEL VEHICLES
SERIES-
SMART URBAN Series
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
13
3
Description
The vehicle recharge posts of the CirCarLife family of products, has been designed to �t all needs in electrical vehicles recharge on the street, compliant with all electrical security regulations as well as access security and me-tering and consumption management.
The robustness for its use and against vandalism is one of the aspects taken in account when designing and developing this equipment, as well as �t them with a temperate and smart aesthetic design. All family CirCarLife range of pro-ducts has been thought to give the electrical vehicle user, a simple method for recharge his vehicle everywhere he parks it, that way the recharging posts has been equipped with a simple access system and energy payment through contact-less cards, as well as a handy and easy opening and closing system, that way all the recharge process could be ful�lled with only a few steps by any user without technical knowled-ge needs.
Aplications
All outdoor places or these that could be used for any kind of vehicle parking (cars, motorcycles, bikes, transport, cleaning, …). An example of this could be public street, public outdoor car parks, outdoor car parks on big malls, airports, car rental companies, cleaning companies, etc. Features
• Access and prepayment with proximity cards (RFID)
• Safety user protection for voltage danger (EU regulation)
• Intelligent and anti-vandalism opening system
• Integrated energy measurement (kWh)
• Protection system against energy fraud
• Integrated electrical protections with self reclosing system
• Display for credit monitoring
• Ready for outdoor use (IP54)
• Coated with anti-graffiti paint
• Anti-vandalism stainless steel body
• Smart aesthetic design
• Communications (optional)
Backlight display, indicating the available credit
Circular stainless steel housing
Protection degree : IP54 and anti-graf�ti paint
Type of Connector: Schuko
RFID Identi�cation and pre-payment
Self-resetting circuit breaker and earth leakage protection
Remote control and monitoring of the unit
Built-in energy metering system
Connected to SCADA control software
Remote control and monitoring of the unit
Built-in energy metering system
Current socket lock with mobile head
Technical features
E3.1 POST BASIC SERIESCharging systems for city streets and intercity roads
CIRCONTROL - CirCarLife
14
.Catalogue 2013-2014
3
Technical features
TypeNum.
Sockets
Input Supply Voltage
Output Power Output Current Charge systemNetworkConnection
Technical Features
PageSocket ASocket
BSocket A Socket B Socket A Socket B
CCL-PE1 COM
1 230 Vac 3,6 kW _ 16 A _Mode 1Shucko
_ RS-485 52
CCL-PE2 COM
2 230 Vac 3,6 kW 3,6 kW 16 A 16 AMode 1Shucko
Mode 1Shucko
RS-485 53
CCL-PE2 IP
2 230 Vac 3,6 kW 3,6 kW 16 A 16 AMode 1Shucko
Mode 1Shucko
RS-485Ethernet
54
CCL-PE2 MOV
2 230 Vac 3,6 kW 3,6 kW 16 A 16 AMode 1Shucko
Mode 1Shucko
RS-485Ethernet
3G55
Unit dimensions
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
15
3
The new Urban Post series, are being launched by Circontrol to be installed on streets and intercity streets for two and four-wheel electrical vehicles. Due to this, Urban Post meets the máximum protection level against vandalism at EU (IK10) and its enclosure allow to work at extrem temperatures and raining places. Improving the life lenght of the electrical charger.
As this is a product designed to be used by different users at many countries around the world, it is compatible with XML & OCPP protocol and also with the most relevant existing back of�ces.
This product has already tested and certi�ed with the most relevant European and Japanese car manufacturers, with great results in terms of efficiency and reliability. Following the philosophy of Circontrol, Urban Post can be customize by software and brand labelling for relevant orders or new distributors.
Instructions on the screen in several languages
Network connection Ethernet and 3G (optional)
Status light indicator
User ID by RFID card, and mobile payment (App, etc.)
Possibility to use front panel for publicity
Dimensions: 940 mm x 450 mm x 195 mm
E.3.2 POST URBAN SERIESCharging systems for city streets and intercity roads
Description
General features
Technical features
Two sockets available at same time (one socket by side)
Power range by socket at 230 V 3,6 kW up to 7,2 kW
Power range by socket at 400 V 11 kW up to 22 kW
Enclosure rating: IP 54 / IK 10 (stainless steel housing)
Compatible with Mode 3 IEC 61851-1 (Certi�ed)
Operating temperature: -30°C to + 45°C
Unit dimensions
450 mm
944,
95 m
m
166,94 mm
CIRCONTROL - CirCarLife
16
.Catalogue 2013-2014
3
TypeNum.
Sockets
Input Supply Voltage
Output Power Output Current Charge systemNetworkConnection
Technical Features
PageSocket A Socket B Socket A Socket B Socket A Socket B
CCL-PM3-Urban
2 230 Vac 3,6 kW 3,6 kW 16 A 16 AMode 3 Type 2
Mode 3 Type 2
Ethernet & 3G
(Optional)56
CCL-PM-MIX-Urban
2 230 Vac 3,6 kW 3,6 kW 16 A 16 AMode 3 Type 2
Mode 1Shucko
Ethernet & 3G
(Optional)57
CCL-PM-MIX4-Urban
4 230 Vac
7,2kW (Socket A)
3.6kW (Socket A1)
7,2kW (Socket B)
3.6kW (Socket B1)
32A (Socket A)
16A (Socket A1)
32A (Socket B)
16A (Socket B1)
Mode 3 Type 2
(Socket A)
Mode 1 & Mode Shucko
(Socket A1)
Mode 3 Type 2
(Socket B)
Mode 1 & Mode Shucko
(Socket B1)
Ethernet & 3G (Optional) 58
CCL-PT3-Urban
2 400 Vac 22 kW 22 kW 32 A 32 AMode 3 Type 2
Mode 3 Type 2
Ethernet & 3G
(Optional)59
CCL-PT-MIX-Urban
2 400 Vac 22 kW 3,6 kW 32 A 16 AMode 3 Type 2
Mode 1 & Mode Shucko
Ethernet & 3G
(Optional)60
CCL-PT-MIX4-Urban
4 400 Vac
22kW (Socket A)
3.6kW (Socket A1)
22kW (Socket B)
3.6kW (Socket B1)
32A (Socket A)
16A (Socket A1)
32A (Socket B)
16A (Socket B1)
Mode 3 Type 2
(Socket A)
Mode 1 & Mode Shucko
(Socket A1)
Mode 3 Type 2
(Socket B)
Mode 1 & Mode Shucko
(Socket B1)
Ethernet & 3G (Optional)
61
Technical features
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
17
3
Description
Smart post series provides a durable and modular enclosure with the robustness ne-cessary to support hard climatic conditions along the streets. Equipped with latest tech-nology in terms of communication and safe-ty devices allows charge electrical vehicle in a easy and protected way.
With an easy and friendly use driver will experience the best way to charge a electrical vehicleIncludes advanced communication capabilities to monitor and setup remotely as well as RFID reader.
E3.3 POST SMART SERIESCharging systems for city streets and intercity roads
Backlight LCD display
Kwh consumption in real time
Indicators: “Available”, “Reserved”, “Not available”
Instructions for use displayed on the screen
User ID
Compatible with Mode 3 IEC 61851-1 (Certi�ed)
Type I, Type II or Schuko connectors, in compliance with the IEC 62196-2 regulations
Technical features
Unit Dimensions
the IEC 62196-2 regulations
380 mm
1590
mm
280 mm
CIRCONTROL - CirCarLife
18
.Catalogue 2013-2014
3
TypeNum.
Sockets
Input Supply Voltage
Output Power Output Current Charge systemNetworkConnection
Technical Features
PageSocket A Socket B Socket A Socket B Socket A Socket B
CCL-PM1
2 230 Vac 3,6 kW 3,6 kW 16 A 16 AMode 1Shucko
Mode 1Shucko
Ethernet & 3G (Optional)
62
CCL-PM3
2 230 Vac 7,3 kW 7,3 kW 32 A 32 AMode 3Type 2
Mode 3Type 2
Ethernet & 3G (Optional)
63
CCL-PM-MIX
2 230 Vac 7,3 kW 3,6 kW 32 A 16 AMode 3Type 2
Mode 1Shucko
Ethernet & 3G (Optional)
64
CCL-PT3
2 400 Vac 22 kW 21 kW 32 A 32 AMode 3Type 2
Mode 3Type 2
Ethernet & 3G (Optional)
65
CCL-PT-MIX
2 400 Vac 22 kW 3,6 kW 32 A 16 AMode 3Type 2
Mode 1Shucko
Ethernet & 3G (Optional)
66
CCL-PT3 63
1 400 Vac 43 kW _ 63 A _Mode 3Type 2
_Ethernet & 3G
(Optional)67
Technical features
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
19
3
Description
The 2 wheel vehicle recharging solution of the CirCarLife family has been designed to cover up the needs of 2 wheel electrical vehi-cles like motorcycles or electrical bikes, com-pliant with all electrical security regulations as well as access security and metering and consumption management.
This solution consists of a controller that manages prepayment through RFID proximity cards and allows the outlet selection and manages the consumption en each outlet. Furthermore this solution integrates security systems to �t users and elec-trical vehicles. Joint to the controller there is a bracket with all electricity out-lets for different kinds of 2 wheel vehicles, each outlet is sepa-rate from the others in a speci�c distance that allows parking the vehicle for recharging purposes in a comfortable way. The robustness for its use and against vandalism as well as installation and use facilities is one of the aspects taken in ac-count when designing and developing this equipment. Fur-thermore this equipment emphasizes for its compact design with high technological level integrated.
All family CirCarLife range of products has been thought to give the electrical vehicle user, a simple method for recharge his vehicle everywhere he parks it, that way, the recharging boxes has been equipped with a simple access system and energy payment through contactless cards, that way all the recharge process could be ful�lled with only a few steps by any user without technical knowledge needs.
The recharge stations for two wheel vehicles has been desig-ned to be installed on public street or in dedicated parks for motorbikes or bikes, its special design makes it ideal to �t any installation place where any 2 wheel vehicle can park.
Aplications
• Access and prepayment with proximity cards (RFID)
• Safety user protection for voltage danger (EU regulation)
• Intelligent and anti-vandalism opening system
• Integrated energy measurement (Kwh)
• Protection system against energy fraud
• Integrated electrical protections with self reclosing system
• Display for credit monitoring
• Ready for outdoor use (IP54)
• Coated with anti-graffiti paint
• Anti-vandalism stainless steel body
• Smart aesthetic design
• Communications (optional)
• Push buttons for selection
Features
E3.4 2-WHEEL SERIESCharging systems for city streets and intercity roads
Vandal-proof metallic casing
Protection degree : IP54
Energy meter
RFID Identi�cation and pre-payment
Backlight display with an indicator of the available credit
Selection push-buttons, with status indicator
Circuit breaker and earth leakage protection
Communications: Ethernet and RS-485, 3G (optional)
Charging data storage
Technical features
CIRCONTROL - CirCarLife
20
.Catalogue 2013-2014
3
TypeNum.
Sockets
Input Supply Voltage
Maximum consumitionper outlet
Maximum output current
Charge systemTechnical Features
Page
CCL-CB3 IP
3 230 Vac 9,2 kW 16AMode 1 Shucko
68
CCL-CB6 IP
6 230 Vac 9,2 kW 16AMode 1 Shucko
68
Technical features
21
.Catalogue 2013-2014
CIRCONTROL - CirCarLife
4
CirCarLifeIntelligent recharging solutions for electric vehicles
The multi-point system of the CirCarLife range has been designed to offer a smart electric vehicle charging solution for car parks with multiple outlet sockets for electrical vehicles.
This solution allows smart electric vehicle charging management of a large number of electric vehicles, con-trolling different parameters of the electric network and the vehicles connected to it, as well as user and car park manager preferences. In this way, users can get maximum results from vehicle charging in accordance with user requirements by charging under the most favourable conditions in terms of electricity tariffs or by opting for immediate charging.
E4. MULTIPOINT SYSTEM
Description
Sockets Series
1 2 3 4
COMMUNICATIONS
RS, Ethernet, Zigbee, PLC, GSM, GPRS
SAVING AND FILTERING
Harmonics FilteringReactive Compensation
IDENTIFICATION
RFIDBar CodeMagnetic Stripe
INTEGRATION WITH OTHER SYSTEMS
Payment SystemsOcupation and guidanceLightingPay and display
ENERGY MANAGEMENT
MeasurementQualityConsumptionAdapt to electrical tariffControl of Recharges
PC SOFTWARE
Real TimeMultiuserGraphicsRemote ConnectionWebXNL interfaceAlarm’s ManagementHistorical GenerationMultiplatform
ELECTRIC COMPANYSIGNAL
Ethernet
3rd system interface
Com
mun
icat
ion
Seria
l RS-
485
(...)
CONTROLLER Series
CIRCONTROL - CirCarLife
22
.Catalogue 2013-2014
4
Description
MULTIPOINT SYSTEM has been designed as an extremely flexible system. Its special configuration can cater for speci�c vehicle charging needs of the current market. In addition, it is a scalable system that can control up to 32 charging stations in its most basic con�guration.
The system is composed of the following basic units:• CCL-CM: CPU (industrial PC with PowerStudio software), 10” Touch Screen• CCL-SL Charging Station
E4.1 Master controller
CCL-SL Charging Station offers
• User interface 10” Touch screen as standard. This is the natural complement of the PowerStudio software, which allows interaction with the user. PowerStudio software, is capable of ef�ciently managing the power available, con-trolling the main’s harmonics (upper measurement system is needed), charging vehicles in off-peak periods, etc.
• The user can browse through the screens that have been designed with ergonomics in mind to select the parking pla-ce, check their charging status, , energy consumed., etc. • Massive storage for all statistical studies.
• All of the current communications power used nowadays (ICT).
• Modbus Communications Protocol to communicate with the charging bases or other speci�c Energy Ef�ciency devi-ces.
• XML Communications Protocol, which enables the inte-gration with other automated parking and car park systems (blue parking areas, car parks in general, access control po-ints, etc.). In addition, it offers remote station management options to parking operators like statistics, remote activation/deactivation, etc.
• Card reader. Built-in prepayment card reader Mifare type as standard, but it can be replaced or complemented with any other reader available in the market.
• The CCL-SL Charging Station it’s a wall-mount charging box that guarantees a safe collection of the energy for the energy of the installation operator, prevents fraud and misu-se of the energy.
• Also provide reliable measurement system for the user, sin-ce only the energy consumed is paid, with an accurate rea-ding of the energy consumed.
• Protects end users against electrical risks. Current is only present during the charging cycle.
• Current antitheft prevention function. The operation is in-terrupted if the socket is removed during the charging pro-cess, so that no more energy will be supplied to the base until the user is identi�ed again.
• In the event of an overload, the maximum current detec-tion and limiting system is activated before the protection circuit breaker is tripped, in order to prevent subsequent maintenance operations.
- Pre-payment cards. Available without credits (paid at a later stage) and pre-charged with 5, 20, 50 or 99 credits.- Pre-payment cards recharging tools.
There are three models available for the recharging of the CirCarLife cards:o CCL-Cash: Cashier for the recharging of prepayment cards, able of accepting credit cards and notes.o CCL-Term: standalone terminal for recharging cards.o CCL-Soft: Software and USB peripheral reader for recharging cards.
CCL-CM offers the following functions
The complementary units that offer all other features to the system are as follows:
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
23
4
More options and accessories
• Upper measurement systems used to control the power available to the installation. The energy available can be limited, bypassed or distributed to the different vehicles connected to the main. To be de�ned, in accordance with the particular con-ditions of each installation.
• Upper measurement and control systems used to control the quality of energy. Measurement and control of harmonics. To be de�ned, in accordance with the particular conditions of each installation.
• Any unit of the CIRCARLIFE family (outdoor posts, wall-mount units, two wheels...) can be connected to the MULTIPOINT system (Standard screen must be adapted).
• The MULTIPOINT SYSTEM vehicle charge unit complies with the CE requirements and the current European Union directives for this type of equipment.
Unit dimensions
These units do not require special anchoring instructions since they are standard in any electrical box installation.The anchoring structure is prepared for 8 mm lag screws or threaded plugs on the CM box and 6 mm on the SL box.
Type Input Voltage LAN Network SL Charging PointScalable master WB control
Technical Features
Page
CCL-CM
230V AC 1P+N Ethernet RJ45 RS 485 Modbus 32 WB Points 69
Technical Features
mm
mm
mm
mm
mm
mmm
mmm
mm
mm
CIRCONTROL - CirCarLife
24
.Catalogue 2013-2014
4
Description
The multi-point system of the CirCarLife range has been designed to offer a smart electric vehicle charging solution for car parks with multiple outlet sockets for elec-trical vehicles.
This solution allows smart electric vehicle charging manage-ment of a large number of electric vehicles, controlling di-fferent parameters of the electric network and the vehicles connected to it, as well as user and car park manager pre-ferences. In this way, users can get maximum results from vehicle charging in accordance with user requirements by charging under the most favourable conditions in terms of electricity tariffs or by opting for immediate charging.
E4.2 Slave Wallbox
Protection degree : IP54
Built-in energy metering system
Compatible with Mode 3 IEC 61851-1. (Certi�ed)
Charge status light indicator (blue, green and red)
Type II or Schuko connectors, in compliance with the IEC 62196-2 regulations
Simple installation. 4-point wall �xing
Self-extinguishing ABS plastic casing
Communications: RS-485
Customised housing �nish and logos
Elegant, aesthetic design
Technical features of WallBox boxes
Unit dimensions
320 mm
51 mm
225 mm 109 mm
125 mm
WALLBOX CHARGING CONNECTION CABLE SUPPORTINCLUDED ONLY WBC SERIES
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
25
4
Techincal Features
Basic Series
CCL-WBC SMARTNum.
Sockets
Input Supply Voltage
Output Power Output Current Charge systemTechnical Features
PageSocket A Socket B Socket A Socket B Socket A Socket B
CCL-WB-SL
1 230 Vac 3,6 kW _ 16A _Mode 1Shucko
_ 70
CCL-WBM SL
1 230 Vac 7,2 kW _ 32 A _Mode 3Type 2
_ 70
CCL-WBC 16 SL
1 230 Vac 3,6 kW _ 16A _Mode 3Type 1
_ 70
CCL-WBC 32 SL
1 230 Vac 7,2 kW _ 32 A _Mode 3Type 1
_ 70
CCL-WB-SL-MIX
2 230 Vac 3,6 kW 7,2 kW 16 A 32AMode 1Shucko
Mode 3Type 2
70
CCL-WBM-SL TRI
1 400 Vac 22 kW _ 32 A _Mode 3Type 2
_ 71
CCL-WB-SL MIX TRI
2 230 Vac 3,6 kW 22 kW 16 A 32 AMode 3Type 2
Mode 1Shucko
71
CIRCONTROL - CirCarLife
26
.Catalogue 2013
5
CirCarLifeIntelligent recharging solutions for electric vehicles
E5. QUICK CHARGING SYSTEM
CIRCONTROL’s ultra-fast charging stations offer the fastest way to recharge the current electric vehicles used. the innovative construc- tion design offers a quick charging solution that is easy to use and complies with the current standards (CHAdeMO, Combo...) for fast electric vehi- cle charging with direct current. ease of installation and electrical pro- tection to increase user safety are other major factors of consideration in the system design.
Integrated communications in this device enable permanent connec- tion with a remote control station, which monitors the device charging data in real time and activates the device remotely, meaning it can be simply and fully exploited.
Integrated dispen-ser power unit Communication CHAdeMO Socket Combo Socket
ADVANCE - -
COMPACT -
COMBO 2 (CCS)
ADVANCE COMPACT COMBO 2
Description
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
27
5Type Ref V in I in P in F Hz V out I out
Connector type
Charging Mode
TechnicalFeatures
Page
QP1CCL- QP1
400VAC 80A 58 kVA 50/60Hz +/- 5%
500VDC 120ADC JEVS G105 Mode 4 72CCL- QPM
QPMIX
CCL- QP-MIX
400VAC 117A 84 kVA 50/60Hz +/- 5%
500VDC (Connector 1)
120ADC (Connector 1)
JEVS G105(Connector 1)
Mode 4(Connector 1)
73Mode 3
(Connector 2)CCL- QPM MIX
400VAC(Connector 2)
32A(Connector 2)
Type2(Connector 2)
QPMIX 63
CCL- QP-MIX 63
400VAC 143A 103 kVA 50/60Hz +/- 5%
500VDC (Connector 1)
120ADC(Connector 1)
JEVS G105(Connector 1)
Mode 4(Connector 1)
74
CCL- QPM MIX 63
400VAC(Connector 2)
63A(Connector 2)
Type2(Connector 2)
Mode 3(Connector 2)
QP2
CCL- QP2
400VAC 160A 170 kVA 50/60Hz +/- 5%
500VDC(Connector 1)
120ADC (Connector 1)
JEVS G105 x2(Connector 1)
Mode 4 75CCL- QPM
500VDC(Connector 2)
120ADC(Connector 2)
JEVS G105 x2(Connector 2)CCL- QPM
Accesories
Accesories
Ref Code Description
CCL-QP-FIL 490065 Harmonics Filter
CCL-QP-IP55 490103 IP55 Conversion for CCL-QPM
CCL-QP-3G 460066 3G Modem
AC/DC Fast charger
Technical especi�cations
Description
Circontrol’s quick charging stations are the fastests way of charging today’s electric vehicles. Their innovative, original design offers a fast, easy to use charging solution, in line with CHAdeMO’s current standards for the quick, direct current charging of electric vehicles.
This solution has a user friendly interface, vandal proof de-sign and easy to install structure. Communications (Ethernet, 3G...) has been integrated in all models allowing remote con-trolling of the units and remote monitoring in real time. This feature provides and easy way to integrate in higher systems allowing owner to take pro�t of it.
E5.1 QUICK CHARGING ADVANCE SYSTEM
AC
QPMIX
CCL- QPM MIX
QPMIX 63
CIRCONTROL - CirCarLife
28
.Catalogue 2013-2014
5
LCD Screen for user interaction.
Start, Stop and Emergency Stop buttons.
Light indicator of the charging status.
Instructions for use displayed on the screen.
RFID Identi�cation and pre-payment.
User interface
Power module and charging station splitted.
IK10 Vandal-proof polyurethane casing.
Standard working temperature range: -10ºC to 45ºC.
Overcurrent and earth leakage protection.
EV Standar: IEC 62196-3, IEC 61851-1, CHAdeMO.
Harmonic Filtering.
IP55 Protection for power module.
3G Communications.
Options
Security & Protection
Current socket lock during the charging process (Mode 3 & Mode 4).
Consumption counter kWh and charging time displayed.
Time and consumption based prepayment modes.
Simultaneous charging AC & DC.
Communications & Protocols.
Remote control and monitoring of the unit through standar XML & HTML.
OCPP Protocol integration.
Ethernet: 10/100BaseTX communication.
Embedded Scada Software for mantenance & control.
Charging Management
Technical features
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
29
5
E5.2 QUICK CHARGING COMPACT SYSTEM
Description
Circontrol Quick Charger Compact unit is able to charge all electric vehicles using DC CHAdeMO and AC standards. Charge your car while you take a cup of tea, it will not take longer than 15min.
Our Quick Chargers are equipped with dual technology allowing simultaneous charging of two cars making suitable for business and commercial fleets as well as petrol station along the roads. The Compact version has been adapted with latest communication protocols OCPP and XML.
Circontrol offers an innovative software based in SCADA for remote control and as a management tool.Charging operator can friendly access to status information, graphics and charge reports according historical data regis-tered.
Remote control and monitoring of the unit through standard XML & HTML
OCPP protocol integration
Ethernet 10/100BaseTX communication
Quick Charging in 15 minutes
8” LCD screen for user interaction
Start, Stop and emergency buttons
Light indications for status indication
RFID identi�cation and prepayment
Mode 3 and mode 4 locking mechanism
Real time energy metering
Time and consumption based prepayment modes
Simultaneous AC & DC charging with maximum demand control
Protecions rate IP55 IK10
Temperature range -30ºC to +45ºC
Protection against overloads, short-circuits and insulation faults with an automatic switch
EV standards: IEC 62196-3, IEC 61851-1, CHAdeMO
Harmonic �ltering
3G communications
User interface
Charging management
Security & Protection
Options
Communications and protocols
CIRCONTROL - CirCarLife
30
.Catalogue 2013-2014
5
Technical Features
Accessories
Ref Code Description
CCL-QP-FIL 490065 Harmonic Filtering
CCL-QP-3G 460066 3G Modem
Accesories
Type Ref V in F Hz I in P in V out I outConnector
typeCharging
Mode
TechnicalFeatures
Page
Input Output
QPC
CCL-QPC
400VAC 50/60Hz +/- 5% 80 A 58 kVA 500V 120ADC JEVS G105 Mode 4 76
CCl-QPC-MIX
400VAC 50/60Hz +/- 5% 117 A 84 kVA
500VDC 120ADC JEVS G105 Mode 4
77
400VAC 32A Type 2 Mode 3
CCL-QPC-MIX 63
400VAC 50/60Hz +/- 5% 143 A 103 kVA
500VDC 120ADC JEVS G105 Mode 4
78
400VAC 63A Type 2 Mode 3
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
31
5
Description
Circontrol CCQC (Compact combined quick charged) combine dual port 50kW DC and AC 43kW charger.
Designed to support dual protocol CHADEMO and CCS (com-bo 2) to cover all users needs, making suitable for business and commercial fleets as well as petrol station along the roads.
The Compact Combined version has been adapted with latest communica-tion protocols OCPP and XML. Circontrol offers an innovative software based in SCADA for remote control and as a management tool.
Charging operator can friendly access to status information, graphics and charge reports according historical data registered.
E5.3 QUICK CHARGING COMBO 2
Description
Remote control and monitoring of the unit through standard XML & HTML
OCPP protocol integration
Ethernet 10/100BaseTX communication
Technical Features
Quick Charging in 15 minutes
8” LCD screen for user interaction
Start, Stop and emergency buttons
Light indications for status indication
RFID identi�cation and prepayment
Mode 3 and mode 4 locking mechanism
Real time energy metering
Time and consumption based prepayment modes
Simultaneous AC & DC charging with maximum demand control
IP Rate: IP54
Temperature range -30ºC to +45ºC
Protection against overloads, short-circuits and insulation faults with an automatic switch
EV standards: IEC 62196-3, IEC 61851-1, CHAdeMO and CCS (combo 2)
User interface
Charging management
Communications and protocols
Security & Protection
CIRCONTROL - CirCarLife
32
.Catalogue 2013-2014
5
Type Ref V in F Hz I in P in V out I outConnector
typeCharging
Mode
TechnicalFeatures
Page
Input Output
COMBO2 (CCS)
CCL-QPC-CCS
400VAC 50/60Hz +/- 5% 80 A 58 kVA 500V 120ADC JEVS G105 Mode 4 79
CCl-QPC-CH-CCS
400VAC 50/60Hz +/- 5% 80 A 58 kVA 500VDC
120ADC JEVS G105 Mode 4
80
120 ADC Type 2 COMBO Mode 3
CCL-QPC-CH-CCS-AC63
400VAC 50/60Hz +/- 5% 143 A 103 kVA
500 VDC
120ADC JEVS G105 Mode 4
81
500VDC 120ADC Type 2 COMBO Mode 4
400 VAC 63A Type 2 Mode 3
Technical features
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
33
6
.Catalogue 2013-2014
Remote equipment monitoring and parameterisation.
Display of parameters and the status of devices in real time.
Records and prints historical logs in table or graph format.
Multipoint Web server and Built-in XML Server.
Creation of application access pro�les and users with a user and password.
Very versatile and easy to use.
Compatible with OPC software for PS/PSS.
Alarms module (events).
Creation of customised screens.
Optional control actions can be performed on units.
Report generator and energy bill simulator module, optional emulation of tariffs or hourly periods.
CirCarlife Scada represents an integral software solution that focuses on the control and parame-terisation of smart electric vehicle charging points and units. Nowadays, companies want centrali-sed control of the whole installation for manage-ment and maintenance purposes. CIRCONTROL’s CirCarlife Scada software can read the instanta-neous values of all CirCarlife units in real time and generate tables and historical logs of data that will be saved in the central processing unit (PC) so that this information can be studied later.
In addition, CirCarlife Scada can download all stored data to units with an internal memory.The user can fully control its charging network, checking information on the installation’s status and general consumption in real time. The user can generate custom screens and create alarms, events, reports, tables, etc. with the internal variables of the system.
Ref Code
CCL-SCADA 490052
Speci�cations
Technical Features
NEW
will be saved in the central processing unit (PC) so
In addition, CirCarlife Scada can download all stored data to units with an
Description
E.6 Management and control software
CirCarLifeIntelligent recharging solutions for electric vehicles
CIRCONTROL- CirCarLife
34
.Catalogue 2013-2014
7
CDU-TCP
Description
The CDU-TCP is a device with the latest CIRCONTROL techno-logy, based on the CirCarLife Scada Software. Inside there is a microprocessor with 64Mb memory and driver routines for CIRCONTROL equipment. It can support up to 32 charging stations in its RS485 Bus, and through its Ethernet connec-tion you can access to the internal RS485 bus and the internal memory, remotely through e.g. Internet. It records and stores several weeks of data from connected equipment, in case of loss of communication with the control system (higher SCA-DA). Once retrieved the communication, the CDU-TCP returns the data stored in its memory to the control system (SCADA), preventing loss of data while there was no communication. This team is capable of being programmed to manage events (alarms) taking into account any parameter of any CIRCON-TROL unit connected to it.
The CDU-TCP does not store SCADA screens or reports. These must be on a PC with a superior SCADA, connected to one or more CDU-TCP who will be in charge of providing data to the SCADA.
E7.1 SMART STANDALONE DATA CENTRALISING UNIT
For the CDU-TCP programming, CirCarLife Scada EDITOR 3.0 or higher is required. After starting the Software installation, choose the custom option and install only the EDITOR. Follow steps to complete the installation. The next step is to electrica-lly connect the computers using the following scheme.
Requeriments
Connection example
E7. ACCESORIES
CirCarLifeIntelligent recharging solutions for electric vehicles
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
35
7
Low energy consumption
Rigid aluminium box
Compact unit
High-speed processor (ARM 9)
10/100 Mbps Ethernet Port
Remote con�guration and management
Class 1 Div 2 Certi�ed
Supported Technologies (HSUPA, UMTS, EDGE, GPRS (MS-12), GSM)
Supported Bands:
· Three-band for UMTS/HSDPA/HSUPA
· 850/1900/2100 MHz
· Four-band GPRS/EDGE
· 850/900/1800/1900 MHz”
Temperature range: -30ºC to 70º C
The CirCarlife telecommunication accessories can be used to connect all units of the Circarlife range and establish commu-nications networks, even remotely. The user can remotely ma-nage the full display and control all equipment with the use of the CirCarlife Scada control and supervision software and 3G modem. Ideal for improving and reducing communication installations between outdoor and car park devices, where the installation and con�guration of cabling elements required for communications networks is not always a simple task.
Ref Code
MODEM-3G 490028
Speci�cations
Technical features
MODEM-3G
Description
E7.2 COMMUNICATIONACCESSORIES
CIRCONTROL - CirCarLife
36
.Catalogue 2013-2014
7
SAFESYSTEM
E.7.3 PRE-PAYMENT SOLUTIONS
Description
CIRCONTROL supplies the necessary equipment to recharge the prepayment cards used to charge for the electricity service (software, card loader, RFID cards, pay station). The payment method can be done manually or automatically, using a pay station that includes note reader, coins and CirCarLife cards dispenser or PC software that allows you to charge the card with speci�c tariffs measured in kwh, credit. Restrictions of used also can be applied, etc.
1 Stand-alone terminal (CCL-TERM)
The Prepayment system uses proximity cards (credit card format) with precharged credits that will be discounted ac-cording to consumption. These cards can be recharged as often as desired, with different recharging ways to load ac-cording to needs.
Application
Pre-payment systems
Models
REF CODE DESCRIPTION
CCL-CARD 490012CirCarLife proximity cards without credits.
CCL-SOFT 490014 Software and USB reader
CCL-CARD20 490020CirCarLife proximity cards with 20 credits
CCL-CARD50 490021CirCarLife proximity cards with 50 credits
CCL-CARD90 490022CirCarLife proximity cards with 90 credits
CCL-TERM 490013Standalone terminal for recharging CirCarLife cards.
2 Software Pre-paid (CCL-SOFT)
CCL- CARD, CCL- TERM, CCL- Soft
8
E8. Technical Features
CirCarLifeIntelligent recharging solutions for electric vehicles
37
CIRCONTROL - CirCarLife
38
.Catalogue 2013-2014
8
Type CCL-WBC
Code 490074
Number of sockets 1
Input
AC power supply 1P + N + PE
AC Voltage 230 V AC +/- 10%
Nominal input current ** 16 A
Nomina input power 3,6kW
Required power supply capacity 3,6 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 3,6 kW
Maximum output current 16 A
AC output voltage 230 V AC 1P + N
Charge system
Socket A Mode 3 (IEC 61851)Type 1 cable tethered (UNE EN 62196-2)
Socket B -
General
Cable lenght 5 meters
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
Light beacon Three color led status
Net weight 4 Kg
Optional devices
Extended Temperature range Heater (-30 to + 45 °C)
* depending on local installation
Basic Wallbox Series - CCL-WBC
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
39
8
Type CCL-WBC-32
Code 490123
Number of sockets 1
Input
AC power supply 1P + N + PE
AC Voltage 230 V AC +/- 10%
Nominal input current** 32 A
Nominal input pow 7,2 kW
Required power supply capacity 7,2 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 7,2 kW
Maximum output current 32 A
AC output voltage 230 V AC 1P + N
Charge system
Socket A Mode 3 (IEC 61851)
Type 1 (UNE EN 62196-2) cable tethered
General
Cable lenght 5 meters
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
Light beacon Three color led status
Net weight 4 Kg
Optional devices
Extended Temperature range Heater (-30 to + 45 °C)
**power limit control by software
Basic Wallbox Series - CCL-WBC-32
CIRCONTROL - CirCarLife
40
.Catalogue 2013-2014
8
Type CCL-WB-MIX
Code 490076
Number of sockets 2
Input
AC power supply 1P + N + PE 3P + N + PE
AC Voltage 230 AC +/- 10% * 400 V AC +/- 10%
Nominal input current 48 A
Nominal input power 3,6 kW 22 kW
Required power supply capacity 3,6 kVA 22 kVA
Frequency 50 / 60 Hz -
Output
Maximum output power 7,2 kW (Socket A) 22 kW (Socket B)
Maximum output current 16 A (Socket A) 32 A (Socket B)
AC output voltage 230V AC +/- 10% 400V AC +/- 10%
Charge system
Socket A Mode 3 (IEC 61851)Type 2 (UNE EN 62196-2)
Socket B Mode 1 & Mode 2CEE 7/4 (Schuko) or BS1363 (UK)
General
Cable lenght -
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
Net weight 4 Kg
Optional devices
Extended Temperature range Heater (-30 to + 45 °C)
* depending on local installation
Basic Wallbox Series - CCL-WB-MIX
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
41
8
Type CCL-WBM
Code 490072
Number of sockets 1
Input
AC power supply * 1P + N + PE 3P + N + PE
AC Voltage 230AC +/- 10% 400 V AC +/- 10%
Nominal input current ** 32 A 32 A
Nominal input power 7,2 k 21 kW
Required power supply capacity 7,2 kVA 21 kVA
Frequency 50 / 60 Hz 50 / 60 Hz
Output
Maximum output power 7,2 kW 21 kW
Maximum output current 32 A 32 A
AC output voltage 230 V AC +/- 10% 400 V AC +/- 10%
Charge system
Socket A Mode 3 (IEC 61851)Type 2 (UNE EN 62196-1)
Socket B -
General
Cable lenght -
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
Light beacon Three color led status
Net weight 4 Kg
Optional devices
Extended Temperature range Heater (-30 to + 45 °C)
* depending on local installation
**power limit control by software
Basic Wallbox Series - CCL-WBM
CIRCONTROL - CirCarLife
42
.Catalogue 2013-2014
8
Type CCL-WBMC
Code 490133
Number of sockets 1
Input
AC power supply * 1P + N + PE 3P + N + PE
AC Voltage 230 V AC +/- 10% 400 V AC +/- 10%
Nominal input current ** 32 A
Nominal input power 7,2 kW 22 kW
Required power supply capacity 7,2 kVA 22 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 7,2 kW 22 kW
Maximum output current 32 A
AC output voltage 230 V AC +/- 10% 400 V AC +/- 10%
Charge system
Socket A Mode 3 (IEC 61851)Type 2 (UNE EN 62196-1)
Socket B -
General
Cable lenght 5 meters
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
Light beacon Three color led status
Net weight 4 Kg
Optional devices
Extended Temperature range Heater (-30 to + 45 °C)
* depending on local installation
**power limit control by software
Basic Wallbox Series - CCL-WBMC
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
43
8
Type CCL-WBC-SMART
Code 490075
Number of sockets 1
Input
AC power supply 1P + N + PE
AC Voltage 230V AC +/- 10%
Nominal input current** 16 A
Nominal input power 3,6 kW
Required power supply capacity 3,68 kVA
Frequency 50 / 60 Hz
Output
Rated output power 3,6 kW
Rated output current* 16 A230 V AC 1P + N
Charge system
Socket A Mode 3 (IEC 61851)Type 1 (UNE EN 62196-2) tethered cable
Socket B -
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Cable lenght 5 meters
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Interface protocol OCCP / XML
Net weight 4 Kg
Optional devices
Wireless Comunication 3G / GPRS
Extended Temperature range -30 to +45 °C (Heater system included)
* Adjustable power limit control
Smart Wallbox Series - CCL-WBC-SMART
CIRCONTROL - CirCarLife
44
.Catalogue 2013-2014
8
Type CCL-WBC32-SMART
Code 490124
Number of sockets 1
Input
AC power supply 1 P + N +PE
AC Voltage 230V AC +/- 10%
Nominal input current ** 32 A
Nominal input power 7,2 kW
Required power supply capacity 7,2 kVA
Frequency 50 / 60 Hz
Output
Rated output power 7,2 kW
Rated output current 32 A230 V AC 1P + N
Charge system
Socket A Mode 3 (IEC 61851)Type 1 cable tethered (UNE EN 62196-2)
Socket B -
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Cable lenght 5 meters
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Interface protocol OCCP / XML
Net weight 4 Kg
Optional devices
Wireless Comunication 3G / GPRS
Extended Temperature range -30 to +45 °C (Heater system included)
* Adjustable power limit control
**power limit control by software
Smart Wallbox Series - CCL-WBC32-SMART
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
45
8
Type CCL-WBM-SMART
Code 490073
Number of sockets 1
Input
AC power supply 1P + N + PE
AC Voltage 230 V AC +/- 10%
Nominal input current** 32 A
Nomina input power 7,2 kW
Required power supply capacity 7,2 kVA
Frequency 50 / 60 Hz
Output
Rated output power 7,2 kW
Rated output current 32 A
AC output voltage 230 V AC 1P + N
Charge system
Socket A Mode 3 (IEC 61851)Type 2 (UNE EN 62196-2) Lock plug system
Socket B -
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Cable lenght -
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Interface protocol OCCP / XML
Net weight 4 Kg
Optional devices
Wireless Comunication 3G / GPRS
Extended Temperature range -30 to +45 °C (Heater system included)
**power limit control by software
Smart Wallbox Series - CCL-WBM-SMART
CIRCONTROL - CirCarLife
46
.Catalogue 2013-2014
8
Type CCL-WBS-SMART
Code 490079
Number of sockets 1
Input
AC power supply 1P + N + PE
AC Voltage 230V AC +/- 10%
Nominal input current** 16 A
Nominal input power 3,6 kW
Required power supply capacity 3,68 kVA
Frequency 50 / 60 Hz
Output
Rated output power 3,6 kW
Rated output current* 16 A
AC output voltage 230 V AC 1P + N
Charge system
Socket A Mode 1 & Mode 2CEE 7/4 (Schuko) or BS1363 (UK)
Socket B -
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Cable lenght -
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Interface protocol OCCP / XML
Net weight 4 Kg
Optional devices
Wireless Comunication 3G / GPRS
Extended Temperature range -30 to +45 °C (Heater system included)
* Adjustable power limit control
**Power limit control by software
Smart Wallbox Series - CCL-WBS-SMART
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
47
8
Type CCL-WB-MIX-SMART
Code 490077
Number of sockets 2
Input
AC power supply 1P + N + PE
AC Voltage 230 V AC +/- 10%
Nominal input current** 48 A
Nomina input power 11 kW
Required power supply capacity 11 kVA
Frequency 50 / 60 Hz
Output
Rated output power 7,2 kW (Socket A)3,6 kW (Socket B)
Rated output current* 32 A (Socket A) 16 A (Socket B)
AC output voltage 230 V AC 1P + N
Charge system
Socket A Mode 3 (IEC 61851) Type 2 (UNE EN 62196-2) Lock plug system
Socket B Mode 1 & Mode 2CEE 7/4 (Schuko) or BS1363 (UK)
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Cable lenght -
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Interface protocol OCCP / XML
Net weight 4 Kg
Optional devices
Wireless Comunication 3G / GPRS
Extended Temperature range -30 to +45 °C (Heater system included)
* Adjustable power limit control
**power limit control by software
Smart Wallbox Series - CCL-WB-MIX-SMART
CIRCONTROL - CirCarLife
48
.Catalogue 2013-2014
8
Type CCL-WB2M-SMART
Code 490106
Number of sockets 2
Input
AC power supply 1P + N + PE
AC Voltage 230 V AC +/- 10%
Nominal input current** 64 A
Nomina input power 15 kW
Required power supply capacity 15 kVA
Frequency 50 / 60 Hz
Output
Rated output power 7,2 kW (Socket A)7,2 kW (Socket B)
Rated output current 32 A (Socket A)32 A (Socket B)
AC output voltage 230 V AC 1P + N
Charge system
Socket A Mode 3 (IEC 61851)Type 2 (UNE EN 62196-2) Lock plug system
Socket B Mode 3 (IEC 61851)Type 2 (UNE EN 62196-2) Lock plug system
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Cable lenght -
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Interface protocol OCCP / XML
Net weight 4 Kg
Optional devices
Wireless Comunication 3G / GPRS
Extended Temperature range -30 to +45 °C (Heater system included)
* Adjustable power limit control
**power limit control by software
Smart Wallbox Series - CCL-WB2M-SMART
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
49
8
Type CCL-WBM-SMART-TRI
Code 490089
Number of sockets 1
Input
AC power supply 3P + N + PE
AC Voltage 400 V AC +/- 10%
Nominal input current** 32 A
Nomina input power 22 kW
Required power supply capacity 22,1 kVA
Frequency 50 / 60 Hz
Output
Rated output power 22 kW
Rated output current 32 A
AC output voltage 400 V AC 3P + N
Charge system
Socket A Mode 3 (IEC 61851)Type 2 (UNE EN 62196-2) Lock plug system
Socket B -
Energy meter
Acuracy class in active energy Class 1 - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Cable lenght -
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Interface protocol OCCP / XML
Net weight 4 Kg
Optional devices
Wireless Comunication 3G / GPRS
Extended Temperature range -30 to +45 °C (Heater system included)
* Adjustable power limit control
Smart Wallbox Series - CCL-WBM-SMART-TRI
CIRCONTROL - CirCarLife
50
.Catalogue 2013-2014
8
Type CCL-WB-MIX-SMART-TRI
Code 490090
Number of sockets 2
Input
AC power supply 3P + N + PE
AC Voltage 230 V AC or 400 V AC +/- 10% *
Nominal input current** 48 A
Nomina input power 25 kW
Required power supply capacity 25,7 kVA
Frequency 50 / 60 Hz
Output
Rated output power 22 kW (Socket A)3,6 kW (Socket B)
Rated output current 32 A (Socket A)16 A (Socket B)
AC output voltage 400 V AC +/- 10%
Charge system
Socket A Mode 3 (IEC 61851)Type 2 (UNE EN 62196-2) Lock plug system
Socket B Mode 1 & Mode 2CEE 7/4 (Schuko) or BS1363 (UK)
Energy meter
Acuracy class in active energy Class 1 - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Cable lenght -
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Interface protocol OCCP / XML
Net weight 4 Kg
Optional devices
Wireless Comunication 3G / GPRS
Extended Temperature range -30 to +45 °C (Heater system included)
* Adjustable power limit control
**power limit control by software
Smart Wallbox Series - CCL-WB-MIX-SMART-TRI
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
51
8
Type CCL-WB2M-SMART-TRI
Code 490107
Number of sockets 2
Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 10%
Nominal input current ** 64 A
Nominal input power 44 kW
Required power supply capacity 44,2 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 22 kW (Socket A)22 kW (Socket B)
Maximum output current 32 A (Socket A)32 A (Socket B)
AC output voltage 400 V AC 3P + N
Charge system
Socket A Mode 3 (IEC 61851)Type 2 (UNE EN 62196-2) Lock plug system
Socket B Mode 3 (IEC 61851)Type 2 (UNE EN 62196-2) Lock plug system
Energy meter
Acuracy class in active energy Class 1 - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Cable lenght -
Enclosure rating IP 54 / IK 10
Enclosure material ABS plastic
Installation mode Simple installation, 4-point wall�xing
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Operating temperature -10 to +45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Interface protocol OCCP / XML
Net weight 4 Kg
Optional devices
Wireless Comunication 3G / GPRS
Extended Temperature range -30 to +45 °C (Heater system included)
* Adjustable power limit control
**power limit control by software
Smart Wallbox Series - CCL-WB2M-SMART-TRI
CIRCONTROL - CirCarLife
52
.Catalogue 2013-2014
8
Type CCL-PE1-COM
Code 490000
Number of sockets 1
Input
AC power supply 1P + N + PE
AC Voltage 230 V AC +/- 10%
Nominal input current 16 A
Nominal input power 3,6 kW
Required power supply capacity 3,68 kVA
Frequency 50 / 60 Hz
Output
Rated output power 3,6 kW
Rated output current 16 A
AC output voltage 230 V AC 1P + N
Charge system
Mode Mode 1 & Mode 2
Socket A CEE 7/4 (Schuko) or BS1363 (UK)
Electrical protections
Overcurrent protections MCB
Safety Protection RCD 30mA autorecovery (class A)
Energy meter
Integrated meter
Network connection
Bus RS-485
General
Enclosure rating IP 54 / IK 10
Enclosure material Stainless steel
Socket protection Socket lock with mobile head
Operating temperature -30 to + 45 °C (Heater system included)
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display 2 units of 7 segments display
Net weight 40 Kg
Optional devices
Wireless Comunication -
RCD Protection RCD class B
MCB Autorecovery
Charging Post Basic Series - CCL-PE1-COM
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
53
8
Type CCL-PE2-COM
Code 490025
Number of sockets 2
Input
AC power supply 1P + N + PE
AC Voltage 230 V AC +/- 10%
Nominal input current 32 A
Nominal input power 7,2 kW
Required power supply capacity 7,36 kVA
Frequency 50 / 60 Hz
Output
Rated output power 3,6 kW (Socket A)3,6 kW (Socket B)
Rated output current 3,6 kW (Socket B)16 A (Socket A)
AC output voltage 230 V AC 1P + N
Charge system
Mode Mode 1 & Mode 2
Socket A CEE 7/4 (Schuko) or BS1363 (UK)
Socket B CEE 7/4 (Schuko) or BS1363 (UK)
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Integrated meter
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Bus RS-485
General
Enclosure rating IP 54 / IK 10
Enclosure material Stainless steel
Socket protection Socket lock with mobile head
Operating temperature -30 to + 45 °C (Heater system included)
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display 2 units of 7 segments display
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol XML
Net weight 40 Kg
Optional devices
Wireless Comunication 3G
RCD Protection RCD class B
MCB Autorecovery
Charging Post Basic Series - CCL-PE2-COM
CIRCONTROL - CirCarLife
54
.Catalogue 2013-2014
8
Type CCL-PE2-IP
Code 490026
Number of sockets 2
Input
AC power supply 1P + N + PE
AC Voltage 230 V AC +/- 10%
Nominal input current 32 A
Nominal input power 7,2 kW
Required power supply capacity 7,59 kVA
Frequency 50 / 60 Hz
Output
Rated output power 3,6 kW (Socket A)3,6 kW (Socket B)
Rated output current 16 A (Socket A)16 A (Socket B)
AC output voltage 230 V AC 1P + N
Charge system
Mode Mode 1 & Mode 2
Socket A CEE 7/4 (Schuko) or BS1363 (UK)
Socket B CEE 7/4 (Schuko) or BS1363 (UK)
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Integrated meter
Network connection
Ethernet 10/100BaseTX (TCP-IP)
Bus RS-485
General
Enclosure rating IP 54 / IK 10
Enclosure material Stainless steel
Socket protection Socket lock with mobile head
Operating temperature -30 to + 45°C (Heater system included)
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display 2 units of 7 segments display
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol XML
Net weight 40 Kg
Optional devices
Wireless comunication 3G
RCD protection RCD class B
MCB Autorecovery
Charging Post Basic Series - CCL-PE2-IP
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
55
8
Type CCL-PE2-MOV
Code 490027
Number of sockets 2
Input
AC power supply 1P + N + PE
AC Voltage 230 V AC +/- 10%
Nominal input current 32 A
Nominal input power 7,2 kW
Required power supply capacity 7,36 kVA
Frequency 50 / 60 Hz
Output
Rated output power 3,6 kW (Socket A)3,6 kW (Socket B)
Rated output current 16 A (Socket A)16 A (Socket B)
AC output voltage 230 V AC 1P + N
Charge system
Mode Mode 1 & Mode 2
Socket A CEE 7/4 (Schuko) or BS1363 (UK)
Socket B CEE 7/4 (Schuko) or BS1363 (UK)
Electrical protections
Overcurrent protections MCB autorecovery
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Integrated meter
Network connection
Ethernet 10/100BaseTX (TCP-IP)
Bus RS-485
General
Enclosure rating IP 54 / IK 10
Enclosure material Stainless steel
Socket protection Socket lock with mobile head
Operating temperature -30 to + 45 °C (Heater system included)
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display 2 units of 7 segments display
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol XML
Net weight 40 Kg
Optional devices
Wireless Comunication 3G
RCD Protection RCD class B
Charging Post Basic Series - CCL-PE2-MOV
CIRCONTROL - CirCarLife
56
.Catalogue 2013-2014
8
Charging Post Smart Series -CCL-PM3-URBAN
Type CCL-PM3-URBAN
Code 490135
Number of sockets 2
Input
AC power supply 1 P + N + PE
AC Voltage 230V AC +/- 10%
Nominal input current * 64 A
Nominal input power 15 kW
Required power supply capacity 15 kVA
Frequency 50 / 60 Hz
Output
Maximumoutput power 7,3 kW (Socket A) 7,3 kW (Socket B)
Maximumoutput current* 32 A (Socket A) 32 A (Socket B)
AC output voltage 230 V AC 1P + N
Charge system
Socket A Type 2 (UNE EN 62196-2) lock system Mode 3 (IEC 61851)
Socket B Type 2 (UNE EN 62196-2) lock system Mode 3 (IEC 61851)
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Stainless steel
Operating temperature -30 to + 45 °C (Heater system included)
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protection Transient surge protector Type 2 (EN 61643-11)
* Adjustable power limit control
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
57
8
Charging Post Smart Series -CCL-PM-MIX-URBAN
Type CCL-PM-MIX-URBAN
Code 490136
Number of sockets 2
Input
AC power supply 1 P + N + PE
AC Voltage 230V AC +/- 10%
Nominal input current* 48 A
Nominal input power 11 kW
Required power supply capacity 11,5 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 7,3 kW (Socket A) 3,6 kW (Socket B)
Maximumoutput current* 32 A (Socket A) 16 A (Socket B)
AC output voltage 230 V AC 1P + N
Charge system
Socket A Type 2 (UNE EN 62196-2) lock system Mode 3 (IEC 61851)
Socket B CEE 7/4 (Schuko) or BS1363 (UK) Mode 1 & Mode 2
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Stainless steel
Operating temperature -30 to + 45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protection Transient surge protector Type 2 (EN 61643-11)"
* Adjustable power limit control
CIRCONTROL - CirCarLife
58
.Catalogue 2013-2014
8
Type CCL-PM-MIX4-URBAN
Code Check availability
Number of sockets 4
Input
AC power supply 1 P + N + PE
AC Voltage 230V AC +/- 10%
Nominal input current * 64 A
Nominal input power 15 kW
Required power supply capacity 15 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 7,3 kW (Socket A1)
3,6 kW (Socket A2)
7,3 kW (Socket B1)
3,6 kW (Socket B2)
Maximum output current* 32 A (Socket A1)
16 A (Socket A2)
32 A (Socket B1)
16 A (Socket B2)
AC output voltage 230 V AC 1P + N + PE
Charge system
Socket A1 Type 2 (UNE EN 62196-2) lock system Mode 3 (IEC 61851)
Socket A2 CEE 7/4 (Schuko) or BS1363 (UK) Mode 1 & Mode 2
Socket B1 Type 2 (UNE EN 62196-2) lock system Mode 3 (IEC 61851)
Socket B2 CEE 7/4 (Schuko) or BS1363 (UK) Mode 1 & Mode 2
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Stainless steel
Operating temperature -30 to + 45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protectionTransient surge protector Type 2 (EN 61643-11)
* Adjustable power limit control
Charging Post Smart Series -CCL-PM-MIX4-URBAN
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
59
8
Charging Post Smart Series -CCL-PT3-URBAN
Type CCL-PT3-URBAN
Code 490138
Number of sockets 2
Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 10%
Nominal input current * 64 A
Nominal input power 42 kW
Required power supply capacity 43,5 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 21 kW (Socket A) 21 kW (Socket B)
Maximum output current* 32 A (Socket A) 32 A (Socket B)
AC output voltage 400 V AC 3P + N
Charge system
Socket A Type 2 (UNE EN 62196-2) lock system Mode 3 (IEC 61851)
Socket B Type 2 (UNE EN 62196-2) lock system Mode 3 (IEC 61851)
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class 1 - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Stainless steel
Operating temperature -30 to + 45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protectionTransient surge protector Type 2 (EN 61643-11)
* Adjustable power limit control
CIRCONTROL - CirCarLife
60
.Catalogue 2013-2014
8
Type CCL-PT-MIX-URBAN
Code 490139
Number of sockets 2
Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 10%
Nominal input current * 48 A
Nominal input power 11 kW
Required power supply capacity 11,5 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 21 kW (Socket A) 3,6 kW (Socket B)
Maximumoutput current32 A (Socket A) 16 A (Socket B)
AC output voltage 400 V AC 3P + N (Socket A) 230 V AC 1P + N (Socket B)
Charge system
Socket A Type 2 (UNE EN 62196-2) lock system Mode 3 (IEC 61851)
Socket B CEE 7/4 (Schuko) or BS1363 (UK) Mode 1 & Mode 2
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class 1 - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Stainless steel
Operating temperature -30 to + 45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protectionTransient surge protector Type 2 (EN 61643-11)
* Adjustable power limit control
Charging Post Smart Series -CCL-PT-MIX-URBAN
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
61
8
Type CCL-PT-MIX4-URBAN
Code 490137
Number of sockets 4
Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 10%
Nominal input current * 64 A
Nominal input power 44 kW
Required power supply capacity 44,3 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 22 kW (Socket A1)
11 kW (Socket A2)
22 kW (Socket B1)
11 kW (Socket B2)
Maximum output current 32 A (Socket A1)
16 A (Socket A2)
32 A (Socket B1)
16 A (Socket B2)
AC output voltage 400 V AC 3P + N (Socket A1 & B1)
230 V AC 1P + N (Socket B2 & A2 )
Charge system
Socket A Type 2 (UNE EN 62196-2) lock system Mode 3 (IEC 61851)
Socket B CEE 7/4 (Schuko) or BS1363 (UK) Mode 1 & Mode 2
Socket C Type 2 (UNE EN 62196-2) lock system Mode 3 (IEC 61851)
Socket D CEE 7/4 (Schuko) or BS1363 (UK) Mode 1 & Mode 2
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Stainless steel
Operating temperature -30 to + 45 °C
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protectionTransient surge protector Type 2 (EN 61643-11)
* Adjustable power limit control
Charging Post Smart Series -CCL-PT-MIX4-URBAN
CIRCONTROL - CirCarLife
62
.Catalogue 2013-2014
8
Type CCL-PM1
Code 490080
Number of sockets 2
Input
AC power supply 1P + N + PE
AC Voltage 230V AC +/- 10%
Nominal input current* 32 A
Nominal input power 7,3 kW
Required power supply capacity 7,3 kVA
Frequency 50 / 60 Hz
Output
Maximum output power3,6 kW (Socket A) 3,6 kW (Socket B)
Maximum output current16 A (Socket A) 16 A (Socket B)"230 V AC 1P + N (Socket B)
Charge system
Socket A Mode 1 & Mode 2 CEE 7/4 (Schuko) or BS1363 (UK)
Socket B Mode 1 & Mode 2 CEE 7/4 (Schuko) or BS1363 (UK)
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Polyurethane casing
Socket protection Vandal metal doors
Operating temperature -30 to + 45 °C (Heater system included)
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protectionTransient surge protector Type 2 (EN 61643-11)
* Adjustable power limit control
Charging Post Smart Series -CCL-PM1
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
63
8
Type CCL-PM3
Code 490081
Number of sockets 2
Input
AC power supply 1P + N + PE
AC Voltage 230V AC +/- 10%
Nominal input current* 64 A
Nominal input power 14,4 kW
Required power supply capacity 14,5 kVA
Frequency 50 / 60 Hz
Output
Maximum output power7,3 kW (Socket A)7,3 kW (Socket B)
Maximum output current32 A (Socket A)32 A (Socket B)
AC output voltage 230 V AC 1P + N
Charge system
Socket AMode 3 (IEC 61851)Type 2 (UNE EN 62196-2) lock system
Socket BMode 3 (IEC 61851)Type 2 (UNE EN 62196-2) lock system
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Polyurethane casing
Socket protection Vandal metal doors
Operating temperature -30 to + 45 °C (Heater system included)
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protectionTransient surge protector Type 2 (EN 61643-11)
* Adjustable power limit control
Charging Post Smart Series -CCL-PM3
CIRCONTROL - CirCarLife
64
.Catalogue 2013-2014
8
Type CCL-PM-MIX
Code 490082
Number of sockets 2
Input
AC power supply 1P + N + PE
AC Voltage 230V AC +/- 10%
Nominal input current* 48 A
Nominal input power 11 kW
Required power supply capacity 11 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 7,3 kW (Socket A) 3,6 kW (Socket B)
Maximum output current* 32 A (Socket A) 16 A (Socket B)
AC output voltage 230 V AC 1P + N
Charge system
Socket AMode 3 (IEC 61851)Type 2 (UNE EN 62196-2) lock system
Socket BMode 1 & Mode 2CEE 7/4 (Schuko) or BS1363 (UK)
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class B - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
Bus RS-485 (Modbus)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Polyurethane casing
Socket protection Vandal metal doors
Operating temperature -30 to + 45 °C (Heater system included)
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protectionTransient surge protector Type 2 (EN 61643-11)
* Adjustable power limit control
Charging Post Smart Series -CCL-PM-MIX
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
65
8
Type CCL-PT3
Code 490083
Number of sockets 2
Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 10%
Nominal input current* 64 A
Nominal input power 42 kW
Required power supply capacity 44,2 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 21 kW (Socket A) / 21 kW (Socket B)
Maximum output current* 32 A (Socket A) / 32 A (Socket B)
AC output voltage 400 V AC 3P + N
Charge system
Socket AMode 3 (IEC 61851)Type 2 (UNE EN 62196-2) lock system
Socket BMode 3 (IEC 61851)Type 2 (UNE EN 62196-2) lock system
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class 1 - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
Bus RS-485 (Modbus)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Polyurethane casing
Socket protection Vandal metal doors
Operating temperature -30 to + 45 °C (Heater system included)
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protectionTransient surge protector Type 2 (EN 61643-11)
* Adjustable power limit control
Charging Post Smart Series -CCL-PT3
CIRCONTROL - CirCarLife
66
.Catalogue 2013-2014
8
Type CCL-PT-MIX
Code 490084
Number of sockets 2
Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 10%
Nominal input current* 48 A
Nominal input power 25 kW
Required power supply capacity 25,7 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 21 kW (Socket A) 3,6 kW (Socket B)
Maximum output current*32 A (Socket A) 16 A (Socket B)
AC output voltage 400 V AC 3P + N (Socket A) 230 V AC 1P + N (Socket B)
Charge system
Socket A Mode 3 (IEC 61851) Type 2 (UNE EN 62196-2) lock system
Socket B Mode 1 & Mode 2 CEE 7/4 (Schuko) or BS1363 (UK)
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class 1 - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX
Bus RS-485 (Modbus)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Polyurethane casing
Socket protection Vandal metal doors
Operating temperature -30 to + 45 °C (Heater system included)
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protectionTransient surge protector Type 2 (EN 61643-11)
* Adjustable power limit control
Charging Post Smart Series -CCL-PT-MIX
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
67
8
Type CCL-PT3-63
Code 490126
Number of sockets 1
Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 10%
Nominal input current* 63 A
Nominal input power 43 kW
Required power supply capacity 43,6 kVA
Frequency 50 / 60 Hz
Output
Maximum output power 43 kW (Socket A)
Maximum output current* 63 A (Socket A)
AC output voltage 400 V AC 3P + N
Charge system
Socket A Mode 3 (IEC 61851)
Type 2 tethered cable (UNE EN 62196-2)
Electrical protections
Overcurrent protections MCB autorecovery
Safety protection RCD 30mA autorecovery (class A)
Energy meter
Acuracy class in active energy Class 1 - EN50470-3
Accuracy class in reactive energy Class 2 - EN62053-23
Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Enclosure rating IP 54 / IK 10
Enclosure material Polyurethane casing
Socket protection Vandal metal doors
Operating temperature -30 to + 45 °C (Heater system included)
Operating humidity To 95% RH Non-condensing
RFID system ISO / IEC14443A / B
Display LCD Backlight double line text
Rear Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Interface protocol OCCP / XML
Net weight 65 Kg
Optional devices
Wireless Comunication 3G / GPRS
RCD Protection RCD class B
Overvoltage protectionTransient surge protector Type 2 (EN 61643-11)
* Adjustable power limit control
Charging Post- CCL-PT3-63
CIRCONTROL - CirCarLife
68
.Catalogue 2013-2014
8
Charging Post - 2 Wheel Series
Type CCL-CB3 IP CCL-CB6 IP
Code 490037 490039
Number of plugs 3 6
Power input 230Vac 1P+ N 230Vac 1P+ N + PE
Tolerance ±10% ±10%
Frequency input 50..60Hz 50..60Hz
Power output 230Vac 230Vac
Maximum consumption per outlet 9,2 kW 18,4 kW
Maximum current output 16A 16A
Connector Schuko CEE 7/4 Schuko CEE 7/4
Charging mode Mode 1 Mode 1
Current metering Integrated meter
RCCB Self-reclosing system
RFID reader ISO 14443A
RFID frequency 13,56MHz
Regulations EN 61851-1 : 2001 part 1
IEC 61000, IEC 60364-4-41, IEC 61008 – 1, IEC 60884-1, IEC 60529, IEC61010
UNE-EN55011, UNE-EN62196-1, UNE-EN61851-1, UNE-EN61851-21, UNE-EN61851-22
ISO 14443A
Temperature range -10 ... +45 ºC
IP protection IP 54
Surround FE ST37 2mm thickness
Surface Grey polyester paint RAL 9006 with anti-graf�ti coat
Anchor Floor �xing
Individual Technical features
MODEL CCL-MO3
Maximum consumption 11 kW
Number of outlets 3
Weight 46Kg
Dimensions 2,9m ; 0,3m
MODEL CCL-MO6
Maximum consumption 22 kW
Number of outlets 6
Weight 67Kg
Dimensions 4,2m ; 0,3m
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
69
8
Multipoint Controller - CCL-CM
Type CCL-CM
Code 490015
Power Supply
Input voltage 230V AC 1P+N+PE
Nominal input power 60W
Input frequency 50/60Hz
Network connection
LAN network Ethernet RJ45
SL charging point RS485 Modbus
Scalable master WB control 32 WB points
General
Enclosure Material Steel metalic body
Operating temperature -10 to +45cº
Operating Humidity To 95% RH Non-condensing
RFID reader system ISO/IEC14443A/B
LCD Display 10.4" XGA TFT LCD touch screen
Interface Integration protocol OCPP / XML
Power limit control Maximum demand management
Net weight 6kg
Software
OS Linux operation system
Scada management control Circarlife scada
Optional devices
Wireless Comunication 3G/GPRS
Extended Temperature range Heater (-30 to +50Cº)
Meter Utility company own meter
AC Analyzer AC Power Quality Analyzers
Harmonics Active harmonic �lter
CIRCONTROL - CirCarLife
70
.Catalogue 2013-2014
8
Multipoint Sockets - CCL-WB-SL Single phase
Type CCL-WB-SL CCL-WBM SL CCL-WBC 16 SL CCL-WBC 32 SL CCL-WB-SL-MIX
Code 490091 490092 490057 490125 490094
Number of plugs 1 1 1 1 2
Outputs
Rated output current 16A 32A 16A 32A 32A (Socket A) 16A (Socket B)
Rated output 3,6kW 7,2kW 3.6kW 7.2kW 7.2kW (Socket A)3.6kW (Socket B)
Output AC voltage 230V AC 1P+N+PE 230V AC 1P+N+PE
230V AC 1P+N+PE 230V AC 1P+N+PE 230V AC 1P+N+PE
Inputs
Input voltage 230V AC 1P+N 230V AC 1P+N 230V AC 1P+N 230V AC 1P+N 2 x 230V AC 1P+N
Nominal input current 16A 32A 16A 32A 32A 16A
Nominal input power 3,6kW 7,2kW 3.6kW 7,2kW 25kW
Input frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz
Charge system
Socket A Mode 1 & Mode 2 Mode 3 (IEC 61851)
Mode 3 (IEC 61851) Mode 3 (IEC 61851) Mode 3 (IEC 61851)
Socket B - - - - Mode 1 & Mode 2
Sockets
Socket A CEE 7/4 (Schuko) or BS1363 (UK)
Type 2 (UNE EN 62196-2)
Type 1 (UNE EN 62196-2)
Type 1 (UNE EN 62196-2)
Type 2 (UNE EN 62196-2) lock system
Socket B - - - - CEE 7/4 (Schuko) or BS1363 (UK)
Energy Meter
Internal meter
Cable
Cable lenght - - 5 meters 5 meters -
Cable support - - Metal cable support Metal cable support -
Network connection
RS485 (scalable) Modbus
General
Energy Meter Internal meter
Enclosure Rating IP54 /IK10
Enclosure Material ABS
Operating Temperature -10 to +45Cº
Operating Humidity To 95% RH Non-condensing
Net Weight 4kg
Light beacon Three color led Status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Optional devices
Extended range tempe-rature
Heater (-30 to +50Cº)
RFID reader System ISO/IEC14443A/B
Connector Lock System - Type 2 connector hook
- - Type 2 connector hook
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
71
8
Multipoint Sockets - CCL-WB-SL Three phase
Type CCL-WBM-SL TRI CCL-WB-SL MIX TRI
Code 490093 490095
Number of plugs 1 2
Outputs
Rated output current
32A 32A (Socket A)16A (Socket B)
Rated output power 21kW 21kW (Socket A)3.6kW (Socket B)
Output AC voltage 400V AC 3P+N+PE 400V AC 3P+N (Socket A) 230V AC 1P+N (Socket B)
Input
Input voltage 400V AC 3P+N 400V AC 3P+N (Socket A) 230V AC 1P+N (Socket B)
Nominal input current 1 x 32A 32A 16A
Nominal input power* 22kW 25kW
Input frequency 50/60Hz 50/60Hz
Charge system
Socket A Mode 3 (IEC 61851) Mode 3 (IEC 61851)
Socket B - Mode 1 & Mode 2
Sockets
Socket A Type 2 (UNE EN 62196-2) Type 2 (UNE EN 62196-2) lock system
Socket B - CEE 7/4 (Schuko) or BS1363 (UK)
Energy Meter Internal meter
Network connection
RS485 (scalable) Modbus
General
Enclosure Rating IP54 /IK10
Enclosure Material ABS
Operating temperature -10 to +45cº
Operating Humidity To 95% RH Non-condensing
Light beacon Three color led status
Power limit control Mode 3 PWM control according ISO/IEC 61851-1
Net weight 4kg
Optional devices
Extended Temperature range Heater (-30 to +50Cº)
RFID reader System ISO/IEC14443A/B
Connector Lock System Type 2 connector hook
CIRCONTROL - CirCarLife
72
.Catalogue 2013-2014
8
Quick Charge Advance CCL-QP1
Type CCL-QPM
Code 490064
AC Input
AC power supply 3P + PE + N
AC Voltage 400V AC +/- 5%
Nominal input current 80 A (software limit control)
Required power supply capacity 58 kVA
Power Factor >0,96
Ef�ciency 95 % at nominal output power
Frequency 50/60 Hz
AC Output (to charging post)
AC power supply 1P + N + PE
Output voltage 230 V AC
DC Output (to charging post)
Maximum output current 125 A
Maximum output power 50 kW
Output voltage range 50 - 500 VDC
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
General
Enclosure rating IP44 / IK10
Enclosure material Zinced steel
Operating temperature -30 ° to + 45 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
Operational noise < 55 dBA
Compliance CHAdeMO / CE rev.0.9 certi�ed
Dimensions (D x W x H) 780mm x 650mm x 2060mm
Cooling system Air Cooling fans
Isulating system High frequency transformer isolation
Net weight 440Kg
Optional devices
Enclosure rating kit Kit IP55
Armonic Filter (Current) <13% THD
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
COMMUNICATION
POST POWER UNIT< <
Type CCL-QP1
Code 490061
AC Input (From power unit)
AC power supply 1P + PE + N
AC Voltage 230V AC +/- 5%
DC Input (From power unit)
Maximum input current 125 A
Maximum input power 50 kW
DC Output
Maximum output current 125A
Maximum output power 50 kW
Output voltage range 50 - 500 VDC
Charge system
Mode charge Mode 4 (IEC-61851-23/24)
Plug type Plug type: JEVS G105 (IEC-92196-3)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
Bus* RS-485 (Modbus)
General
Compliance CHAdeMO / CE rev.0.9 certi�ed
Enclosure rating IP54 / IK10
Enclosure material Polyurethane IK10 vandal-proof
Operating temperature -30 ° to + 60 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
RFID system ISO / IEC14443A / B
Display 8" HMI
Power limit control Software DC limit option
DC Cable lenght 3 meters
Lights for status indication RGB colors indicator
Interface protocol OCCP / XML
Dimensions (D x W x H) 280mm x 380mm x 1590mm
Weight 80kg
Optional devices
Wireless Comunication 3G/GPRS/GSM
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
* Communications from Power unit to charge post unit
POWER
<<
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
73
8
Technical characteristics
COMMUNICATION
POWER UNIT< <POWER
Technical characteristics
Quick Charge Advance CCL-QP-MIX
Technical characteristics
POST
Type CCL-QP-MIX
Code 490063
AC Input (From power unit)
AC power supply 3P + PE + N
AC Voltage 400V AC +/- 5%
DC Input (From power unit)
Maximum input current 125 A
Maximum input power 50 kW
AC output
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 5%
Maximum AC current 32 A
Maximum AC power 22 kW
DC output
DC Voltage 50 - 500 V
Maximum DC current 125 A
Maximum DC power 50 kW
Charge system
DC charge Mode 4 (IEC-61851-23/24)Plug type: JEVS G105 (IEC-92196-3)
AC charge Mode3 (IEC61851-1) Socket: Type 2 (IEC6296)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
Bus* RS-485 (Modbus)
General
Compliance CHAdeMO / CE rev.0.9 certi�ed
Enclosure rating IP55 / IK10
Enclosure material Polyurethane IK10 vandal-proof
Operating temperature -30 ° to + 60 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
RFID system ISO / IEC14443A / B
Display 8" HMI
Power limit control Software DC limit option
DC Cable lenght 3 meters
Lights for status indication RGB colors indicator
Interface protocol OCCP / XML
Dimensions (D x W x H) 280mm x 380mm x 1590mm
Weight 90kg
Optional devices
Wireless Comunication 3G/GPRS/GSM
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
* Communications from Power Unit to Charge Post Unit
Type CCL-QPM-MIX
Code 490100
AC Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 5%
Nominal input current 117 A (software limit control)
Required power supply capacity 84 kVA
Power Factor >0,96
Ef�ciency 95 % at nominal output power
Frequency 50/60 Hz
AC Output (to charging post)
AC power supply 3P + N + PE
Output voltage 400 VAC
Maximum AC current 32 A
Maximum AC power 22 kW
DC Output (to charging post)
Maximum output current 125 A
Maximum output power 50 kW
Output voltage range 2 x 50 - 500 VDC
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
General
Enclosure rating IP44 / IK10
Enclosure material Zinced steel
Operating temperature -30 ° to + 45 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
Operational noise < 55 dBA
Compliance CHAdeMO / CE rev.0.9 certi�ed
Dimensions (D x W x H) 780mm x 650mm x 2060mm
Cooling system Air Cooling fans
Isulating system High frequency transformer isolation
Net weight 440Kg
Optional devices
Enclosure rating kit Kit IP55
Armonic Filter (Current) <13% THD
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
CIRCONTROL - CirCarLife
74
.Catalogue 2013-2014
8
Quick Charge Advance CCL-QP-MIX-63
Type CCL-QP-MIX-63
Code 490120
AC Input (From power unit)
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 5%
DC Input (From power unit)
DC Voltage range 50 - 500 V
Maximum DC current 125 A
Maximum DC power 50 kW
AC Input (From power unit)
Maximum AC current 63 A
Maximum AC power 21 kW
DC Output
DC Voltage range 50 - 500 V
Maximum DC current 125 A
Maximum DC power 50 kW
Charge system
DC charge Mode 4 JEVS G105 (CHAdeMO)
AC charge Mode3 (IEC61851-1) Type 2 Plug (IEC6296)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
Bus* RS-485 (Modbus)
General
Compliance CHAdeMO / CE rev.0.9 certi�ed
Enclosure rating IP55 / IK10
Enclosure material Polyurethane IK10 vandal-proof
Operating temperature -30 ° to + 60 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
RFID system ISO / IEC14443A / B
Display 8" HMI
Power limit control Software DC limit option
DC Cable lenght 3 meters
AC Cable lenght 5 meters
Lights for status indication RGB colors indicator
Interface protocol OCCP / XML
Dimensions (D x W x H) 280mm x 380mm x 1590mm
Weight 90kg
Optional devices
Wireless Comunication 3G/GPRS/GSM
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
*Communications from Power Unit to Charge Post Unit
Type CCL-QPM-MIX-63
Code 490121
AC Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 5%
Nominal input current 143 A (software limit control)
Required power supply capacity 103 kVA
Power Factor >0,96
Ef�ciency 95 % at nominal output power
Frequency 50 / 60 Hz
AC Output (to charging post)
AC power supply 3P + N + PE
Output voltage 400 V AC
Maximum AC current 63 A
Maximum AC power 43 kW
DC Output (to charging post)
Maximum output current 125 A
Maximum output power 50 kW
Output voltage range 50 - 500 VDC
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
General
Enclosure rating IP44 / IK10
Enclosure material Zinced steel
Operating temperature -30 ° to + 45 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
Operational noise < 55 dBA
Compliance CHAdeMO / CE rev.0.9 certi�ed
Dimensions (D x W x H) 780mm x 650mm x 2060mm
Cooling system Air Cooling fans
Isulating system High frequency transformer isolation
Net weight 440 Kg
Optional devices
Enclosure rating kit Kit IP55
Armonic Filter (Current) <13% THD
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
COMMUNICATION
POWER UNIT< <POWERPOST
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
75
8
Type CCL-QPM
Code 490064
AC Input
AC power supply 3P + PE + N
AC Voltage 400V AC +/- 5%
Nominal input current 80 A (software limit control)
Required power supply capacity 58 kVA
Power Factor >0,96
Ef�ciency 95 % at nominal output power
Frequency 50/60 Hz
AC Output (to charging post)
AC power supply 1P + N + PE
Output voltage 230 V AC
DC Output (to charging post)
Maximum output current 125 A
Maximum output power 50 kW
Output voltage range 50 - 500 VDC
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
General
Enclosure rating IP44 / IK10
Enclosure material Zinced steel
Operating temperature -30 ° to + 45 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
Operational noise < 55 dBA
Compliance CHAdeMO / CE rev.0.9 certi�ed
Dimensions (D x W x H) 780mm x 650mm x 2060mm
Cooling system Air Cooling fans
Isulating system High frequency transformer isolation
Net weight 440Kg
Optional devices
Enclosure rating kit Kit IP55
Armonic Filter (Current) <13% THD
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
Technical characteristics
COMMUNICATION
POWER UNIT< <POWER
Technical characteristics
POST
Quick Charge Advance CCL-QP2
Type CCL-QP2
Code 490062
AC Input (From power unit)
AC power supply 1P + PE + N
AC Voltage 230V AC +/- 5%
DC Input (From power unit)
Maximum input current 2 x 125 A
Maximum input power 2 x 50 kW
DC Output
Maximum output current 2 x 125A
Maximum output power 2 x 50 kW
Output voltage range 50 - 500 VDC
Charge system
Mode charge Mode 4 (IEC-61851-23/24)
Plug type Plug type: JEVS G105 (IEC-92196-3)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
Bus* RS-485 (Modbus)
General
Compliance CHAdeMO / CE rev.0.9 certi�ed
Enclosure rating IP54 / IK10
Enclosure material Polyurethane IK10 vandal-proof
Operating temperature -30 ° to + 60 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
RFID system ISO / IEC14443A / B
Display 8" HMI
Power limit control Software DC limit option
DC Cable lenght 3 meters
Lights for status indication RGB colors indicator
Interface protocol OCCP / XML
Dimensions (D x W x H) 280mm x 380mm x 1590mm
Weight 80kg
Optional devices
Wireless Comunication 3G/GPRS/GSM
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
* Communications from Power unit to charge post unit
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
* Communications from Power unit to charge post unit
CIRCONTROL - CirCarLife
76
.Catalogue 2013-2014
8
Quick Charge Compact- CCL-QPC
Type CCL-QPC
Code 490098
Number of plugs 1
AC Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 5%
Nominal input current 80 A (software limit control)
Required power supply capacity 58 kVA
Power Factor > 0,96
Ef�ciency 95 % at nominal output power
Frequency 50 / 60 Hz
DC Output
Maximum output current 125 A
Maximum output power 50 kW
Output voltage range 50 - 500 VDC
Charge system
Mode charge Mode 4 (IEC-61851-23/24)
Plug type JEVS G105 (IEC-92196-3)
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Compliance CHAdeMO / CE rev.0.9 certi�ed
Enclosure rating IP55 / IK10
Enclosure material Zinced steel
Operating temperature -30 ° to + 45 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-conden-sing
RFID system ISO / IEC14443A / B
Display 8" HMI
Power limit control AC & DC by software
DC Cable lenght 3 meters
Lights for status indication RGB colors indicator
Interface protocol OCCP / XML
Dimensions (D x W x H) 780mm x 650mm x 2060mm
Weight 450kg
Isulating system High frequency transformer isolation
Cooling system Air Cooling fans
Optional devices
Wireless Comunication 3G/GPRS/GSM
Armonic Filter <13% THD
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
77
8
Quick Charge Compact- CCL-QPC-MIX
Type CCL-QPC-MIX
Code 490099
Number of plugs 2
AC Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 5%
Nominal input current 117 A (software limit control)
Required power supply capacity
84 kVA
Power Factor >0,96
Ef�ciency 95 % at nominal output power
Frequency 50 / 60 Hz
DC Output
Maximum output current 125 A
Maximum output power 50 kW
Output voltage range 50 - 500 VDC
AC Output
Maximum output current 32 A
Maximum output power 21 kW
Output voltage range 400V AC 3P + N + PE
Charge system
DC charge Mode 4 (IEC-61851-23/24)JEVS G105 (IEC-92196-3)
AC charge Mode3 (IEC61851-1) Type 2 Plug (IEC6296)
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Compliance CHAdeMO / CE rev.0.9 certi�ed
Enclosure rating IP55 / IK10
Enclosure material Zinced steel
Operating temperature -30 ° to + 45 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
RFID system ISO / IEC14443A / B
Display 8" HMI
Operational noise < 55 dBA
Power limit control AC & DC by software
DC Cable lenght 3 meters
AC Cable lenght 5meters
Lights for status indication Three color led status
Interface protocol OCCP / XML
Dimensions (D x W x H) 780mm x 650mm x 2060mm
Weight 440kg
Cooling system Air Cooling fans
Isulating system High frequency transformer isolation
Optional devices
Wireless Comunication 3G/GPRS/GSM
Armonic Filter <13% THD
MiD certi�ed AC meter Active Energy Class B Reactive Energy Class 2.0
CIRCONTROL - CirCarLife
78
.Catalogue 2013-2014
8
Quick Charge Compact- CCL-QPC-MIX 63
Type CCL-QPC-MIX 63
Code 490128
Number of plugs 2
AC Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 5%
Nominal input current 143 A (software limit control)
Required power supply capacity
103 kVA
Power Factor >0,96
Ef�ciency 95 % at nominal output power
Frequency 50 / 60 Hz
DC Output
Maximum output current 125 A
Maximum output power 50 kW
Output voltage range 50 - 500 VDC
AC Output
Maximum output current 63 A
Maximum output power 43 kW
Output voltage range 400V AC 3P + N + PE
Charge system
DC charge Mode 4 (IEC-61851-23/24)JEVS G105 (IEC-92196-3)
AC charge Mode3 (IEC61851-1) Type 2 (IEC6296) tethered cable
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Compliance CHAdeMO / CE rev.0.9 certi�ed
Enclosure rating IP55 / IK10
Enclosure material Zinced steel
Operating temperature -30 ° to + 45 °C (Heater system included)
Ambient temperature storage
-20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
RFID system ISO / IEC14443A / B
Display 8" HMI
Operational noise < 55 dBA
Power limit control AC & DC by software
DC Cable lenght 3 meters
AC Cable lenght 5meters
Lights for status indication Three color led status
Interface protocol OCCP / XML
Dimensions (D x W x H) 780mm x 650mm x 2060mm
Weight 450kg
Cooling system Air Cooling fans
Isulating system High frequency transformer isolation
Optional devices
Wireless Comunication 3G/GPRS/GSM
Armonic Filter <13% THD
MiD certi�ed AC meter Active Energy Class B Reactive Energy Class 2.0
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
79
8
Quick Charge Combo CCL-QPC-CCS
Type CCL-QPC-CCS
Code 490146
AC Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 5%
Nominal input current 80 A (software limit control)
Required power supply capacity 58 kVA
Power Factor >0,96
Ef�ciency 95 % at nominal output power
Frequency 50 / 60 Hz
DC Output
Maximum output current 125 A
Maximum output power 50 kW
Output voltage range 50 - 500 VDC
Charge system
DC charge Mode 4 (IEC-61851-23/24)
Type Combo-2(DIN 70121)
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autoreco-very (class A)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Compliance CE / Combo-2 (DIN 70121) EN61851-23
Enclosure rating IP55 / IK10
Enclosure material Zinced steel
Operating temperature -30 ° to + 45 °C (Hea-ter system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
RFID system ISO / IEC14443A / B
Display 8" HMI
Power limit control DC by software
DC Cable lenght 3 meters
Lights for status indication RGB colors indicator
Interface protocol OCCP / XML
Dimensions (D x W x H) 780mm x 650mm x 2060mm
Weight 440kg
Isulating system High frequency trans-former isolation
Cooling system Air Cooling fans
Optional devices
Wireless Comunication 3G/GPRS/GSM
Armonic Filter <13% THD
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
CIRCONTROL - CirCarLife
80
.Catalogue 2013-2014
8
Quick Charge Combo CCL-QPC-CH-CCS
Type CCL-QPC-CH-CCS
Code 490147
Number of plugs 2
AC Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 5%
Nominal input current 80 A (software limit control)
Required power supply capacity 58 kVA
Power Factor >0,96
Ef�ciency 95 % at nominal output power
Frequency 50 / 60 Hz
DC Output
Maximum output current 125 A
Maximum output power 50 kW
Output voltage range 50 - 500 VDC
Charge system
DC Charge 1 Mode 4 (IEC-61851-23/24)
Combo-2 (DIN 70121)
DC Charge 2 Mode 4 (IEC-61851-23/24)
JEVS G105 (IEC-92196-3)
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Compliance CE / Combo-2 (DIN 70121) EN61851-23
CHAdeMO rev.0.9 certi�ed
Enclosure rating IP55 / IK10
Enclosure material Zinced steel
Operating temperature -30 ° to + 45 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
RFID system ISO / IEC14443A / B
Display 8" HMI
Power limit control DC by software
DC Cable lenght 3 meters
Lights for status indication RGB colors indicator
Interface protocol OCCP / XML
Dimensions (D x W x H) 780mm x 650mm x 2060mm
Weight 440kg
Isulating system High frequency transfor-mer isolation
Cooling system Air Cooling fans
Optional devices
Wireless Comunication 3G/GPRS/GSM
Armonic Filter <13% THD
MiD certi�ed AC meter Active Energy Class B, Reactive Energy Class 2.0
CIRCONTROL - CirCarLife
.Catalogue 2013-2014
81
8
Quick Charge Combo CCL-QPC-CH-CCS-AC63
Type CCL-QPC-CH-CCS-AC63
Code 490148
Number of plugs 3
AC Input
AC power supply 3P + N + PE
AC Voltage 400V AC +/- 5%
Nominal input current 143 A (software limit control)
Required power supply capacity 103 kVA
Power Factor >0,96
Ef�ciency 95 % at nominal output power
Frequency 50 / 60 Hz
DC Output
Maximum output current 125 A
Maximum output power 50 kW
Output voltage range 50 - 500 VDC
AC Output
Maximum output current 63 A
Maximum output power 43 kW
Output voltage range 400V AC 3P + N + PE
Charge system
DC Charge 1 Mode 4 (IEC-61851-23/24)Combo-2 (DIN 70121)
DC Charge 2 Mode 4 (IEC-61851-23/24)JEVS G105 (IEC-92196-3)
AC charge Mode3 (IEC61851-1) Type 2 (IEC6296) tethered cable
Electrical protections
Overcurrent protections MCB
Safety protection RCD 30mA autorecovery (class A)
Network connection
Ethernet 10/100BaseTX (TCP-IP)
General
Compliance CE / Combo-2 (DIN 70121) EN61851-23CHAdeMO rev.0.9 certi�ed
Enclosure rating IP55 / IK10
Enclosure material Zinced steel
Operating temperature -30 ° to + 45 °C (Heater system included)
Ambient temperature storage -20 to +60Cº
Operating humidity 30 to 90 % RH Non-condensing
RFID system ISO / IEC14443A / B
Display 8" HMI
Power limit control AC & DC by software
DC cable lenght 3 meters
AC cable lenght 5 meters
Lights for status indication RGB colors indicator
Interface protocol OCCP / XML
Dimensions (D x W x H) 780mm x 650mm x 2060mm
Weight 445 Kg
Isulating system High frequency transfor-mer isolation
Cooling system Air Cooling fans
Optional devices
Wireless Comunication 3G/GPRS/GSM
Armonic Filter <13% THD
MiD certi�ed AC meter Active Energy Class B Reactive Energy Class 2.0
Nº 6002038
Circontrol has a network of distributors and representative agents all over the world, for further information contact with:
CIRCONTROL S.A. (Headquarter)C/ Innovació, 3 - Industrial park CAN MITJANS08232 – VILADECAVALLS (Barcelona)Spain
Tel.: +34 937 362 940Fax.: +34 937 362 941