Circo, CaroFalt, SpaceColumn Formwork

300

25

30

35

40

45

50

55

60

65

70

75

80

100

25

30

35

40

45

50

55

60

65

70

75

80

50

25

30

35

40

45

50

55

60

65

70

75

80

2

Circular column formwork CircoCircular columns are a prominent architectural feature in structural and civil engineering projects. Since concrete cosmetics are rarely admitted, the demands on the concrete finish (architectural concrete) of circular columns are high.

System benefitsn 300 cm basic units and 100 and 50 cm

extensions cater for all column height in 50 cm steps.n Coated steel facing for a perfect concrete

finish. n Only one part needed to close the forms:

the MEVA clamp.n Accurate ganging thanks to turned connect-

ing flange.n Used with MEVA wall formwork Mammut

350, Circo is perfect for rounded wall ends.n Diameters in 5 cm steps from 25 to 80 cm.n Easy attachment of push-pull props.

Integrated safetyn Working platform with safety hatch.n Integrated safety ladder access.

Circo unit sizes

Heights (cm)

Circo: Round Perfection

Dia

met

ers

(cm

)

Circo

3

Circular Column Formwork

Simple, fast assembly Circo comes to the site in two half shells which are closed using the MEVA clamp. n Easy to join to straight walls.n Same connecting method, identical parts.n Simplified logistics, no special tools.

360

60

120

270

60

120

1

2 3

4

Safety for high column poursCaroFalt is a foldable and movable column form-work with access platform, integrated ladders and safety cages that comply with international safety standards.

Efficient designCaroFalt consists of four identical hinged panels like wind mill vanes. This makes assembly very simple.

CaroFalt can be used with or without Chamfer strips to form either sharp or exactly beveled edges. This way, the access platform and ladder do not have to be assembled and dismantled again and again. Once attached, all accessories remain at their position.

System benefitsn Height extensions added from below saves

dismantling and re-fitting safety gear.n Fixed working platform with safety access. n Close and open panels with a spanner. n All-plastic facing alkus for superior concrete

finish for all pours. n Easy closing and joining units with the

MEVA clamp.

Roll on wheels to the next pourThe complete unit can be wheeled to the next pour by adding on wheels. The complete unit is moved to the next level in a single crane lift.

CaroFalt: Fold it. Wheel it. Done.

Heights

Basic units

Extensions from below

CaroFalt

6

4 5

5

Column Formwork

Fresh concrete pressure 100 kN/m²for fast, high concrete pours and column cross-sections from 20 to 60 cm.

Easy height adaptationWorking platform and safety access remain in place on the basic unit 1 . Basic units 270 and 360 cm high 2 . Height adaptation through extensions added from below 3 . No dismantling and re-fitting. Extensions in 60 cm and 120 cm heights allow for column heights in 30 cm steps. Join basic unit and extensions easily and quickly with the MEVA clamp.

Setting the cross sectionThe tape allows setting the column square or rectangular cross section in 5 cm steps 4 .

Easy-to-use spannerfor time-saving and simple opening and closing of the column formwork 5 even from the lad-der access.

Superior concrete finishthanks to the all-plastic facing alkus suited for architectural specifications 6 .

EdgesSharp or bevelled edges are achievable using chamfer strips.

6

Very high vertical building parts like piers or columns call for a safe and cost-effective alternative to conventional shoring systems. MEVA‘s shoring tower Space does the job. The tower units have a square footprint of 480 cm, which makes the shoring tower very stable at any height. The units are pre-assembled and bolted together at ground level. The tower is built from 300 cm high units which can be extended by 50 cm and 100 cm extension units. Space provides the necessary formwork brac-ing with just a few standard parts and, at the same time, serves as a working platform for rebar or concrete pours at heights above 35 m.

Space: Efficient and Safe at Great Heights

System benefitsn Planking with access hatches.n Large working and storage space.n Align and prop the formwork inside the

shoring tower, additional propping not required.

n The shoring tower is safe for high wind loads.

n Suited for columns or piers beyond 35 m.n Height extensions are simple and easy.

Space

7

Shoring Tower

Simple assemblyon the ground in safe conditions. The shoring tower can be moved as a complete unit or in sections to the next pour, allowing for efficient pour cycles and reduced inventory.

Proppinginside the shoring tower.

Integrated safetyAll-round worker protection on each working platform, integrated safety ladder and access hatch.

2810

GB

pdf

3/16

, Prin

ted

in G

erm

any

International Sales & ServiceFormwork CentersHeadquarters (Germany)

MEVA Schalungs-Systeme GmbH

Industriestrasse 5

D-72221 Haiterbach

Tel. +49 7456 692-01

Fax +49 7456 692-66

info@meva-international.com

www.meva-international.com

A-Pfaffstätten, Tel. +43 2252 20900-0

D-Berlin, Tel. +49 3375 90300

D-Haiterbach, Tel. +49 7456 692-01

D-Hannover, Tel. +49 511 949930

H-Budapest, Tel. +36 1 2722222

UAEDubai, Tel. +971 4 3411180

USA-Springfield, Tel. +1 937 3280022

A-Pfaffstätten, Tel. 02252 20900-0

AUS-Adelaide, Tel. 08 82634377

Benelux, Gouda, Tel +31 182 570770

CDN-Toronto, Tel. 416 8278714

CHSeon, Tel. 062 7697100

CO-Bogotá, Tel. 01 5204236

FSarreguemines, Tel. 0387 959938

GBTamworth, Tel. 01827 60217

HBudapest, Tel. 01 2722222

IND-Mumbai, Tel. 022 27563430

MAL-Perak, Tel. 12 5209337

N-Oslo, Tel. 067 154200

PA-Panama City 507 2372222

SGP-Singapore, Tel. 67354459

UAEDubai, Tel. 04 3411180

USASpringfield, Tel. 937 3280022

Family owned and managed in the second generation, MEVA is based in Haiterbach in Germany‘s Black Forest region. The form-work manufacturer is represented through 40 locations on 5 continents.

MEVA has been a pioneer and innovator in formwork since 1970. Many MEVA inventions have become standard in the industry: modular panelised formwork systems, the multifunction profile, the formwork clamp and the closed

hollow profile. MEVA offers a comprehensive product range for every building project and any contractor from small to large, from foundation to high rise and from hand-set formwork all the way to fully automatic climbing systems.