CCDA Exam Quick-Study - Network Life Cycle
-
Upload
chanchan-chan -
Category
Documents
-
view
220 -
download
0
Transcript of CCDA Exam Quick-Study - Network Life Cycle
-
8/13/2019 CCDA Exam Quick-Study - Network Life Cycle
1/11
Network Life Cycle
Created by Michael Law
-
8/13/2019 CCDA Exam Quick-Study - Network Life Cycle
2/11
Citations Teare, Diane, 2008. Authorized Self-Study Guide:
Designing for Cisco Internetwork Solutions (DESIGN),Second Edition. 800 East 96thStreet, Indianapolis,Indiana 46240 USA: Cisco Press
Cisco Systems, Inc
-
8/13/2019 CCDA Exam Quick-Study - Network Life Cycle
3/11
Network Life CyclePrepare
Plan
Design
Implement
Operate
Optimize
-
8/13/2019 CCDA Exam Quick-Study - Network Life Cycle
4/11
Prepare Phase Identify customerrequirements.
Develop network strategy.
Propose high-level conceptual architecture. Identify technologies that will be implemented.
Assess the scope of the network design project.
Identifying required information.
Understanding organizational goals/constraints andtechnical goals/constraints.
-
8/13/2019 CCDA Exam Quick-Study - Network Life Cycle
5/11
Prepare Phase - ExtensionIdentification Hierarchy
Organizational Goals
Add NewCustomerServices
ImproveCustomerSupport
Reduce Costs
IncreaseCompetiveness
OrganizationalConstraints
Budget
Personnel
Policies
Schedule
Technical Goals
ImproveNetwork
Performance
ImproveSecurity andReliability
DecreaseExpected
Downtime
ModernizeOutdated
Technology
Technical Constraints
ExistingEquipment
BandwidthAvailability
ApplicationAvailability
Lack ofQualifiedPersonnel
-
8/13/2019 CCDA Exam Quick-Study - Network Life Cycle
6/11
Plan Phase Identifying networkrequirements.
Assess locations and existing network information.
Perform gap analysis to determine if existinginfrastructure can support proposed system.
This will manage tasks, responsibilities, criticalmilestones and resources required to implement.
The output of this phase is a set of networkrequirements.
-
8/13/2019 CCDA Exam Quick-Study - Network Life Cycle
7/11
Design Phase Design will be based on the requirements identified in
the plan phase.
Gather information from customer input, networkaudit, traffic analysis and network health checklist.
A detailed design of the network is createsdocumentation for infrastructure, services and
applications to be used. Create topological maps
-
8/13/2019 CCDA Exam Quick-Study - Network Life Cycle
8/11
Design Phase - Extension Reviewing existing documentation including hardware,
software, configuration and location of devices and cabling. Obtain verbal input about network to determine impression
of network.
CustomerInput
Perform audit to judge against customer input of network. Reveals information about network including hardware,
configuration and verification of existing documentation.
NetworkAudit
Verifies set of applications currently on the network. Alsomay reveal additional traffic unknown from the first twosteps.
Reveal importance of traffic, priority and security.
TrafficAnalysis
-
8/13/2019 CCDA Exam Quick-Study - Network Life Cycle
9/11
Implement Phase The network is built according to the design
specifications.
Integrate devices without disruption or creating apoint of vulnerability.
Sub-phases of the implementation phase are listed inorder: description of step, reference to design,
implementation guidelines, rollback guidelines,estimated time needed for implementation.
Verification of design is found in the implementationphase.
-
8/13/2019 CCDA Exam Quick-Study - Network Life Cycle
10/11
Operate Phase Maintain the networks health on a day-to-day basis.
Fault detection-and-correction and performance
monitoring occurs in the operate phase. Monitor the network for errors and problems.
-
8/13/2019 CCDA Exam Quick-Study - Network Life Cycle
11/11
Optimize Phase Proactive network management. Identify and resolve
problems before they occur.
Reactive fault correction occurs when proactivemanagement cannot predict and mitigate failures.
The optimize phase may lead to network re-design iftoo many errors occur.