BG Engine Performance Concentrate, PN 1166
Transcript of BG Engine Performance Concentrate, PN 1166
BG Engine Performance ConcentrateCASE STUDY
2001 Harley-Davidson FLSTF 18,000 miles (29,000 km)
Testing conducted at an independent facility. Weather calculations, such as temperature and humidity, are also factored into the testing.
Before After
78 77
79
86
Hor
sepo
wer
74
82
90
76
84
92
80
88
Horsepower
Before After
78
86/117
89/121
86
94
Ft.-
lbs.
74
82
90
98
76
84
92
80
88
96
106
117
127
100
111
122
133
103
114
125
108
119
130
Torque
New
ton
Met
ers
BG Engine Performance Concentrate, PN 1166
BG Engine Performance ConcentrateCASE STUDY
2007 Harley-Davidson FLHR 71,000 miles (114,000 km)
Testing conducted at an independent facility. Weather calculations, such as temperature and humidity, are also factored into the testing.
Before After
78
75
79
86
Hor
sepo
wer
74
82
90
76
84
92
80
88
Horsepower
Before After
78
89/121
94/127
86
94
Ft.-
lbs.
74
82
90
98
76
84
92
80
88
96
106
117
127
100
111
122
133
103
114
125
108
119
130
Torque
New
ton
Met
ers
BG Engine Performance Concentrate, PN 1166
BG Engine Performance ConcentrateCASE STUDY
2008 Harley-Davidson 138,520 miles (222,926 km)
Testing conducted at an independent facility. Weather calculations, such as temperature and humidity, are also factored into the testing.
70
90
Before
80
After
65
85
75
95
66
70
Hor
sepo
wer
60
100
Horsepower
75
95
Before
85
After
90
80
100
79/107
85/115Ft.-
lbs.
70
105
102
129
115
122
108
136
95
142
Torque
New
ton
Met
ers
BG Engine Performance Concentrate, PN 1166
BG Engine Performance ConcentrateCASE STUDY
2013 Harley-Davidson 5,400 miles (8,690 km)
Testing conducted at an independent facility. Weather calculations, such as temperature and humidity, are also factored into the testing.
70
90
Before
80
After
65
85
75
95
89
94
Hor
sepo
wer
60
100
Horsepower
75
95
Before
85
After
90
80
100 99/134
103/140
Ft.-
lbs.
70
105
Torque
102
129
115
122
108
136
95
142
New
ton
Met
ers
BG Engine Performance Concentrate, PN 1166
BG Engine Performance ConcentratePN 1166
4 Specially formulated to improve shifting in wet clutch applications
4 Superior long-lasting protection against engine wear
4 Prevents oxidation and thickening of engine oil
4 Keeps piston rings, hydraulic lifters and other engine components clean
4 Compatible with synthetic and petroleum-based oils
4 Treats 4 Qts or 3.785 Liters (1:20 treat ratio), do NOT over-treat in wet-clutch applications
BG EPR® Engine Performance Restoration®
PN 1096
4 Revolutionary “ring-clean” technology
4 Dissolves hard-to-remove fuel gums on piston rings
4 Increases compression
4 Improves power
4 Lowers tailpipe emissions
BG Supercharge®IIPN 2026
4 Prevents deposit formation throughout the fuel system
4 Improves engine performance
4 Prevents rust and corrosion
4 Excellent long-term storage fuel stabilizer
4 Lowers tailpipe emissions
After 5,000 miles (8,000 km), an untreated reference gasoline left deposits on each intake valve.
After 10,000 miles (16,000 km), the same reference gasoline treated with BG Supercharge®II proved amazingly effective in preventing deposit formation.
Commercially available gasoline, regardless of the brand or grade of gasoline used, will cause deposits to form on intake manifolds, valves and ports. Deposit buildup in these areas will cause severe driveability problems such as loss of power, reduced fuel mileage, hesitation, rough idle and increased exhaust emissions.
BG Supercharge ®II will keep the entire fuel system clean and free of deposits. It also contains special stabilizers which prevent fuel oxidation, thus preventing gum and varnish formation while fuel is in storage.
© Copyright 2015 BG Products, an ISO 9001 and 14001 certified company • Wichita, Kansas 67213 • www.bgprod.com • MADE IN U.S.A.
NEW FORMULA
Engine Performance Concentrate
PN 1166
Used with each oil change, BG Engine Performance Concentrate will reduce oil oxidation, reduce wear, keep piston rings, valve lifters and other engine components free of varnish, rust and other accumulated deposits. It provides outstanding friction-reducing and viscosity-improving characteristics which protect engine components during extended high-temperature operation.
BG Engine Performance Concentrate enhances and prolongs the performance of corrosion inhibitors, detergents, dispersants and antioxidant/anti-wear additives in engine oil. It helps maintain engine cleanliness and performance under tough operating conditions.
• Improves viscosity
• Keeps engine components clean
• Reduces oil consumption
• Reduces engine wear
• Helps prevent costly repairs
X • XV
Specially formulated to improve shifting in wet clutch applications
Thin Film Oxygen Uptake TestASTM D4742
The Thin Film Oxygen Uptake Test, ASTM D4742, measures oxidation stability of a lubricant.
The chart shows the results for some base engine oils and these same base oils with BG Engine Performance Concentrate added. The results are in minutes. The higher the time value (result), the better the oxidation stability of the fluid.
Basically, the oil sample is absorbing oxygen. Oxygen, in turn, will cause oxidation and breakdown of fluid. This is when viscosity increase may occur, as well as sludge formation. The endpoint of the test (in minutes) occurs when the fluid sample is saturated with oxygen.
Each base oil responds differently when BG Engine Performance Concentrate is added because each engine oil manufacturer may be using different additive chemistry.
BG Engine Performance Concentrate, PN 1166
Kawasaki Performance Semi-Synthetic Blend 4-Cycle V-Twin 10W-40
Honda GN4™ 4-Stroke Motorcycle Oil 10W-40
Suzuki® 4-Cycle Motorcycle Oil SP-4A 10W-40
Yamalube® Performance All Purpose 4-Stroke 10W-40
AMSOIL® Synthetic Motorcycle Oil 20W-50
Castrol™ Power RS™ V-Twin 4T Part Synthetic 20W-50
Harley Davidson® Genuine 20W-50
Honda HP4™ Synthetic/Petroleum Blend 20W-50
Kawaski Performance Oils 20W-50
Suzuki® Motorcycle Engine Oil SP-4B 20W-50
Harley Davidson® Screamin’ Eagle® SYN3® Full Synthetic 20W-50
BG High-Performance 4-Stroke Engine Oil SAE 20W-50, PN 777
Motorcycle Oil TFOUT ChartASTM D4742
0
200
400
600
800
1000
1200
minutes
Motorcycle oil treated with BG Engine Performance Concentrate, PN 116Motorcycle oil
394290
319167
267166
265119
1000553
398298
278397
171347
209302
136264
357443
4641000
*
*
*This sample did not experience rapid oxidation and deterioration, therefore it does not have an assigned value. The test was stopped at 1000 minutes.
©copyright 2015 BG Products, Inc. • Wichita, Kansas 67213 • www.bgprod.com
ATTENTION. The information contained herein is based on BG Products, Inc. best professional judgment and intended for the use of the individual or entity named on the report. Any dissemination to third parties is unauthorized. If you have received this information in error, please notify us immediately by telephone (1-800-961-6228) and we will arrange for the return of the original paperwork to our office. Any disclosure, copying, distribution or use of the contents is strictly prohibited.
BG Engine Performance Concentrate, PN 1166Measurement of Wear Properties of Fluid Lubricants
(Falex Pin and Vee Block)ASTM D3233A
The test is designed to measure the load carrying property of a lubricant under a given set of conditions. A steel journal (pin) is rotated between two stationary V-shaped blocks at 290 RPM while immersed in 60 ml of lubricant. The pressure of the vee blocks against the rotating pin is gradually increased at a constant rate until the test pin breaks due to excessive load pressure. This pressure is the recorded end point.
Kawasaki Performance Semi-Synthetic Blend 4-Cycle V-Twin 10W-40
Honda GN4™ 4-Stroke Motorcycle Oil 10W-40
Suzuki® 4-Cycle Motorcycle Oil SP-4A 10W-40
Yamalube® Performance All Purpose 4-Stroke 10W-40
AMSOIL® Synthetic Motorcycle Oil 20W-50
Castrol™ Power RS™ V-Twin 4T Part Synthetic 20W-50
Harley Davidson® Genuine 20W-50
Honda HP4™ Synthetic/Petroleum Blend 20W-50
Kawaski Performance Oils 20W-50
Suzuki® Motorcycle Engine Oil SP-4B 20W-50
Harley Davidson® Screamin’ Eagle® SYN3® Full Synthetic 20W-50
BG High-Performance 4-Stroke Engine Oil SAE 20W-50, PN 777
Motorcycle Oil Extreme Pressure TestFalex ASTM D3233A
0
500
1000
1500
2000
2500
3000
pounds-force
Motorcycle oil treated with BG Engine Performance Concentrate, PN 116Motorcycle oil
2650730
13650*
1050655
735735
24801330
25751160
21501375
2400740
2450875
900700
28501575
18501600
©copyright 2015 BG Products, Inc. • Wichita, Kansas 67213 • www.bgprod.com
*This oil failed in the pre-test warm up.
ATTENTION. The information contained herein is based on BG Products, Inc. best professional judgment and intended for the use of the individual or entity named on the report. Any dissemination to third parties is unauthorized. If you have received this information in error, please notify us immediately by telephone (1-800-961-6228) and we will arrange for the return of the original paperwork to our office. Any disclosure, copying, distribution or use of the contents is strictly prohibited.