Bank of Baroda · Tendererwho will quote the rate must have a local office at ... 11 Amps meter &...

1

2.

3.

4.

5.

6.

7.

1.

2.

3.

4.a) The Tenderer shall furnish copies of :

i) IT Registration Certificate with No.

ii) Sales Tax Registration Certificate with No.

iii) Service Tax Registration Certificate with No.

iv) Electrical Contractor's License with No.

v) Electrical Supervisor’s License with No.

5.

a)

b)

c)

d)

e)

Part 'B' of the tenders will be opened for those only who fulfils the qualifying criteria given in the tender document.

The unopened part 'B' along with Earnest Money deposit for those not fulfilling qualifying criteria will be returned.

Clarifications, if any, required on drawings, schedules, specifications, etc. can be obtained from our Consultant

M/s. DEARCH ARCHITECTS PRIVATE LTD,101 Madurdaha Opp Bhuribhoj Restrurant Kolkata 700 107,

Phone No -033 65009098,98300 18243

The Tenderer should also submit the following documents along with the Tender.

List of technical persons available on hand, years of their association with the firm & proposed to be engaged for

the subject work, if selected (marked Annexure-IX) ;

The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders

without assgming any reason whatsoever.

marked Annexure - VI

marked Annexure - VII

marked Annexure - VIII

List of works in hand indicating description of work, contract value, approximate value of balance work yet to be

done and date of award (marked Annexure-XII)

Tenderer who will quote the rate must have a local office at Kolkata. This is absolutely essential for day to day

supervision & coordination of the work at site.

All informations are to be fully authenticated & documented failing which the documents submitted will not be

accepted.

Bank of Baroda

Bank of Baroda, West Bengal, Sikkim & A & N Island invites sealed tenders in two bid system for the proposed interior

& electrical work of Berhampur Branch,92 B.B.Sen Road PO Khagra,Berhampur Dist.Murshidabad, West Bengal-

742103. The work is to be completed within 2(Two) weeks.

List of important plant & machinery available on hand (own) and proposed to be inducted (own & hired to be

given separately) for carpentry & electrical work (marked Annexure-X)

List of works completed in the last (three) financial years under Bank / Govt., Semi - Govt,Govt. undertaking /

Corporate Sectors giving description of work, organisation for whom executed, approximate value of contract at

the time of award, date of award and date of scheduled completion of work, date of actual completion and final

value of contract should also be given (marked Annexure-XI)

marked Annexure - V

(Government of India Undertaking)

NOTICE INVITING TENDER

Interested agencies having experience in work of similar nature & magnitude and fulfilling the eligibility criteria

given below may download detailed tender document from Bank's Website http:bankofbaroda.com/tenders.asp

marked Annexure - IV

The tenderer should have completed in last three Financial years (i.e. current year & two previous financial year) in

Bank, Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc. minimum 3 (three) similar

composite work (Interior Furnishing & Electrical) costing not less than Rs. 12.00 lacs in single contract. (Work order &

completion Report in support must be submitted & marked as Annexure-I)

The total contract amount received by the Tenderer during the last 3 financial years should be minimum as 25.00

lacs per year in contract work. In support of this the Tenderer should submit audited sheet duly Certified by the

Chartered Accountant & marked Annexure-II.

The Tenderer should produce Solvency Certificate from any Nationalised / Scheduled Bank for an amount of 200%

of the advertised Tender value marked Annexure-III.

Part 'A' envelope (Technical Bid) shall contain : Earnest Money, the documents for satisfying eligibility criteria & the

technical & financial stipulation, if any, of the tenderer & Part 'B' shall contain : financial bid along with a copy of

the tender document, duly signed in all pages both shall be separately sealed & submitted in another sealed

envelope to the Asst. General Manager, Bank of Baroda, West Bengal, Sikkim & A & N Island, BARODA TOWER, Plot

No. 38/2, Block GN, Sector-V, Salt Lake City, Kolkata : 700 091, before 2.30 P.M. on 24.07.2012 along with Earnest money

amounting to Rs. 6,000/- by Bank Draft / Pay order in favour of Bank of Baroda shall be submitted in Part 'A'.

MINIMUM ELIGIBILITY CRITERIA (Shall be submitted with Part A of the Offer)

Part 'A' will be opened at 3.30 p.m. on 24.07.2012.

1

1.

2.

3.

4.

5.

6.

7

8.

9.

10.

11.

Contractors will be required to arrange for their own storing. Dismantled materials are to be carted away from site

at their own cost and disposed of in conformity with Municipal regulations.

The quoted rates, are to include cost of all materials, labour and or any other material, all statutory taxes, transport,

handling delivery at site and installation, complete in all respect, as per drawing, directions or instructions of

Employer/Consultant. The quoted rates are also to include dismantling of partitions, counters, old electrical wirings

etc. and stacking serviceable materials and disposal of debris, etc.

Prior approval of the Employer/ Consultant shall be obtained for colour and thickness of laminates to be used in the

work.

GENERAL TERMS & CONDITIONS

The tenderer are to visit the site and acquaint themselves with site conditions before quoting rates.

The arrangement for “ Wire Management " is to have prior approval of the Client.

The quoted rates shall remain firm during the entire currency of contract. No price variation for any causes

whatsoever, shall be entertained.

The time of completion shall be two (2) weeks from the date of placement of order.

The offer shall remain valid for acceptance for a period of 30 days from the date of submission of offer.

The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders

without assgming any reason whatsoever.

Payments will be made once on completion by the Employer within 15 days after certification of bill by the

Consultant 10% of the total payable amount is to be retained as retention money and will become due for release

after expiry of six months from the date of completion of the installation & subject to satisfactory maintenance of

the executed work.

Tenders addressed to Asst. General Manager, Bank of Baroda, West Bengal & Sikkim Region and submitted at his

office at BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt lake City, Kolkata : 700 091, before 2.30 P.M. on

24.07.2012, accompanied by Earnest Money amounting to Rs. 6,000/- by Bank draft payable to Bank of Baroda

and other documents as mentioned in NIT. Part 'A' of the tenders will be opened at 3.30 P.M. on the same date.Part

'B' will be opened immediately after opening of Part 'A'.

2

LIST OF APPROVED MATERIALS FOR CIVIL & FURNISHING WORK

SL.NO. ITEMS APPROVED MAKE

1 False Ceiling / Channels India Gypsum

Wood Frame Work / Wood Section : All Wood

Must be well seasoned, free from knots, other defects decay and defects

due to handling and

Transportation. Wherever necessary, provide with anti – termite

Treatment.

3 Wood Skirting / Moulding / Lipping / Bidding White Beach / White Ceader

a) Door frame : Teak wood /Sal Wood

4 Wood Preservative : STP Pentaphene Pale / Termiseal by PCI /

Bison by British Paint

5 Fire Reterdent Paint Industrial grads of Noble / Viper

6 BWR Ply / BWP Block board with ISI mark Frontier Ply / Green

/Century/Duro/Globe/Sylvan

7 Flush Door Frontier Ply / Green /Century

9 Door Closure ( Heavy Duty ) Godrej / Archi / Sterling ( DC 2000)

10 Floor Spring ( Heavy Duty ) Godrej / Archi / Sterling ( FS 3000 )

11 Door Lock ( Dead ) Godrej / Hafele /Hettich / Kich / Doorset / 4C

Acme ( ML – REG – SS )

12 Door Handles ( ‘H’ Shape) Godrej / Hafele /Hettich / Kich / Doorset / 4C

Acme ( PHG – HSS )

13 Drawer / Storage Handle ( 4”/ 6” ) Kich /Neki / Hassley/EGL ( HMS –B – 9122 /

9123)

14 Drawer / Storage Lock ( Multipurpose ) Ebco / Hafele /Hettich /Doorset

/Godrej/Kombo ( 502)

15 Night latch Godrej / 4C Acme ( RL – MACHO – OS – SS

)

16 Screws GKW / Nettle fold

17 Hinges CIEF

18 Sliding Telescopic Drawer Channel Ebco / Kombo

19 Key Board Tray ( Metal) Ebco / Innofitt Systems ( KD 510. M)

20 Telescopic CPU Stand ( Metal ) Ebco / Innofitt Systems ( CPU MST )

21 Cable Organiser Ebco / Innofitt Systems ( CM 63.C )

22 Adhesive Fevicol SH / Fevimate TL

23 Aluminium Door Frame Jindal

24 Soft Board Jolly Board

25 Vertical Blinds Mac / Annums / Window Fashion

26 Glass Modi /Ashai / Saint Gobain

27 Paints (Synthetic Enamel / Acrylic Emulsion) Asain Paints ( Colour World) / Berger( Colour

Bank )

28 PVC Flooring Krishna Vinyl / Armstrong / LG

29 Texture Paint Spectrum

30 Mirror Modi /Ashai / Saint Gobain

31 European WC / Washbasin Hindware /Parryware

2 Malaysian Sal

8 Laminate ( 1.0mm thk.) Sunmica / Euromica / Green lam /Merino /

Century mica / Royal Touch

32 Sanitary Fittings Jaquar / Essco Delux

33 G.I. Pipe Tata ( Medium ) / Jindal /Bansal

34 Cement Ambuja/ Laferge / ACC

35 Footmat Birla 3M / Approved Equivalent

36 Vitrified Tiles Naveen /Jhonson/Euro

37 Ceramic Tiles Johnson / Naveen/Kajaria

38 Chairs Godrej/Methodex/Monarch

39 All other items not covered above As per sample approved by

Employer/Consultant

LIST OF APPROVED MAKE OF MATERIALS FOR ELECTRICAL WORKS

SL.NO. ITEMS APPROVED MAKE

1 MS pipe ISI mark. 16 SWG BEC / NIC

2 M.S. fittings (Bend / Elbow / G.I Saddle / 3way circular box) BEC / NIC

3 Wire PVC insulated copper flexible wire. (FRLS) Finolex / Havel’s / R.R. Kable

4 A.C. starter North – West / Crabtree/ MDS Legarand

5 250 Volt 6 Amp Piano reed type switch, socket, modular plate Kolors/ Anchor

6 250 Volt 6/16 Amp. 3 pin modular type switch, socket Crabtree / ABB / MDS Legrand / Siemens/

Kolors ( Kraze)

7 Relay ALSTOM / L & T

8 Capacitor Mamal / L&T

9 Current Transformer Kappa / L&T / Schneider (CG) A.E.

10 Changeover Swiitch L&T HPL / GEC / Havells

11 Amps meter & Voltmeter. 96 x 96 mm (Analog) AE / IMP / L&T ALSTOM/ HPL / Havlells

12 Miniature Circuit Breaker & MCB Distribution Boards, RCBO MDS / ABB / L&T (Hager) / Schneider (CG) /

Siemens / LK fuga / Havell’s

13 Amoured Cable NICCO / Fort Gloster / Havell’s CCl

14 Telephone Socket RJ - 11 Crabtree / ABB / MDS

15 Telephone Cable ( 0.51 mmsq) 10/20 pair National / Delton / Netco / Finolex / Retco

17 Lugs Dowells

18 Terminal Connector ESSEN

19 SFU / SPN / TPN Sheet metal housing / Open execution front handle

with housing

L & T / Siemens / Havell’s

20 Telephone Connector KORN type

21 Selector Switch ( Rotary type) Kaycee / A.E./ L& T/ Siemens

22 Rigid PVC Conduit BEC / Kalinga / Plaza / AKG / Precession

23 Sliding fuse / DZ fuse Bharat Lender / BCH

24 PVC casing ( 20 mm ) Precession / Supreme / Oriplast

25 Clock switch / Time switch L & T/ MDS / GIC / T & C

26 PVC Tape Steel Grip / Anchor

27 Join box ( 6” x 4” MS box ) heavy type Local Make

28 Call Bell Anchor / Max / Roma

29 Brass cable gland Arun ( heavy type ) / Dowells

30 LED Indicator ( bright type) Mikadov / L&T / MDS

31 PVC Flexible pipe Hanuman / Precession / Kalinga

32 Metal Clad socket & plug having scraping earth arrangement Siemens / L& T/ MDS / Schneider

33 MCCB Siemens / L& T/ MDS / Havell’s

34 Light fittings Wipro / Philips / Havell’s

35 All other items not covered above As per sample approved by

Employer/Consultant

BOB - BAHARAMPUR

SL

NO.

PARTICULARS UNIT QTY RATE AMOUNT

A CIVIL:

1SYNTHETIC ENAMEL PAINT FOR WINDOW GRILL, ROLLING SHUTTER &

COLLAPSEABLE GATE

Providing and applying 2 coats synthetic enamel paint on window grill,rolling

shutter and collapsiple gate.Before putting final paint scrapping,leveling,preparing

the surface and 2 coats primer to be done.The wall to be completed as per the

direction of architect.

SFT 1000

2 WALL PUTTY

Providing and applying wall putty of average thk. 1.2mm to existing wall surfaces in

true level and plumb complete as directed.The rate is inclusive of making grooves

up to 12mm thick if required in horizontal or vertical direction near doors,windows

and skirting etc.The work to be completed in all respect as per specification,design

and approval of the Architect.

SFT 500

3 PAINTING

Providing and applying Acrylic emulsion paints after removing the damaged plaster

, replastering with 12mm thk cement morter to make the necessary smoothness ,

reparing all damages . Then two coats of Primer of approved make to be applied

finished with two or more coats where ever necessary as per Architects

instructions of acrylic emulsion paints .The work to be completed as per approval

and satisfaction of the Architect.

SFT 1000

4 SANITARY ITEM - IVORY

a

Providing and fixing EWC of Hindware with all accessories like toilet seats Bestolite

type,'P'/'S' trap and cistern with all necessary inner fittings and the interconnection

all complete.

Nos 1

bProviding and fixing Wash basin of 550 x 400 with all internal fittings etc , chain

plug and padestal colour Ivory all complete.Nos 2

c Providing and fixing angular stop cock ESSCO S.S. finish Nos 5

d Providing and fixing Bib cock ESSCO S.S. Finish Nos 2

e Providing and fixing Pillar cock ESSCO S.S. finish Nos 1

f Providing and fixing C.I. floor trap Nos 2

g Providing and fixing 5" CP gratting NOS 2

h Providing and fixing Soap dispenser Nos 1

i Providing and fixing Towel ring Nos 1

j MIRROR FOR TOILET SIZE 2' -0" x 3-'0"

Providing and fixing mirrior in toilets made out of 6mm thk. Machine polish glass all

over edges mounted over 1/2" thk. Marine ply. The mirror shall be fixed with 1" dia

s.s stud.The work to be completed in all respect as per design,direction and

approval of the Architect.

Nos 1

k Paper holder Nos 1

l Twin peg coat hook Nos 1

m Internal Plumbing for toilets

All necessary C.I and G.I pipe conceal lines for swarage and all interconnecting

water lines, waste lines including specials like bends , elbows,union,tee , CP

extension short piece what ever necessary to complete the job . The contractor has

to inspect the spectic tank and do the necessary repair if needed.

Job 1

n Providing and fixing Flatback Urinal with Partition ,ivory colour NOS 2

o Providing and fixing 3/4" heavy quality of ISI make full way gun metal/ Pit Valve NOS 2

p Providing and fixing S.S Sink (24"x16") for kitchen of Nirali or equivalent NO 1

5 CERAMIC TILES

ESTIMATE OF CIVIL WORK FOR BANK OF BARODA - BAHARAMPUR BRANCH

BOB - BAHARAMPUR

( a)

Providing and fixing 300x300mm on floor at toilets with necessary wall plaining

plastering, levling what ever necessary to complete the job as per instruction of the

Architect Tiles Basic rate:30.00/sft.The rate is inclusive of providing and fixing

necessary chemical, backing material, joint filling compound.

Sft 60

( b )

Providing and fixing 300x200mm on dado with necessary wall plaining plastering,

levling what ever necessary to complete the job as per instruction of the Architect

Tiles Basic rate:30.00/sft.The rate is inclusive of providing and fixing necessary

chemical, backing material, joint filling compound.

Sft 300

(c) Skirting (4") RFT 65

6 VITRIFIED TILES

Providing and fixing 2'-0" x 2'-0" vitrified tiles on existing floor using chemicals

(approved brand). complete with bi - colours tiles with design and flower

pattern/Motiff as per design.The rate is inclusive of Chemicals,backing

materials,joint filling compound.The work to be completed in all respect as per

design,direction and approval of the Architect.Tiles Basic rate: 60.00/Sft

SFT 400

(a) Skirting ( 4") Rft 50

7 DEMOLITION/CLEARING WORKS

Dismantling / Demolishing the following and carting away the debris from the site

inclusive loading and unloading by truck at a approved location as per statutory

rules and regulations.

a Existing wooden Doors with frme NOS 4

b

Opening and removing the old existing fittings like existing ewc, basin etc and the

GI and CI lines after necessary cutting and removing the same from the premises in

accordance with the corporation rules.

L.S 1

cExisting dado tiles including backing plaster racking the joints of brick work,

cleaning and preparing the surface to receive the new plasterSFT 300

d

Removing existing cement mortar from ex-isting walls,raking joints to receive new

plas-ter and providing new plaster with Sika latex chemical in 4:2:1 and carting

away the debris from site.The rate is inclusive of using blue lamp if necessary.

SFT 300

8 CORNICE MOULDING

TOTAL - A

SL

NO.

PARTICULARS UNIT QTY RATE AMOUNT

B FURNISHING :

1 FALSE CEILING ( Gypboard)

Providing and fixing Gypsum false ceiling which includes G.I perimeter channels of size

0.55mm thk.( having one flange of 20mm and another flange of 30mm and a web of 27mm)

along with perimeter of ceiling,screw fixed to brick wall/partition with the help of nylon

sleeves and screws, at 610mm centres. Then suspending G.I intermediate channels of size

45mm ( 0.9mm thk. with two flanges of 15mm each) from the soffit at 1220mm centres with

ceiling ange of width 25mm x10mmx0.55mm thk.fixed to soffit with G.I. cleat and steel

expansion fastners ceiling section of 0.55 mm thk. having knurled web of 51.5mm and two

flanges of 26mm each with lips of 10.5 mm are then fixed to the intermediate channel with

the help of connecting clip and in direction perpendicular to the intermediated channel at

457mm centres.12.5mm tapered edge Gypboard ( confirming to IS: 2095 - 1982) is then

screw fixed to ceiling section with 25mm drywall screws at 230mm centers.Screw fixing is to

be done mechanically either with screw driver or drilling machine with suitable attachment.

The boards are to be jointed and and finished so as to have a flush

look which includes filling and finishing the tapered and square edges of the boards with

jointing compound. No extra payment will be made for the cutting of light points , stain

glass,cove lighting etc. The measurement will be taken in one level, rate should include the

drops also, no extra amount will be paid for the drops. The joints to be properly mended

with paper tapes and gypsum compound,two coats of Drywall Top Coat all complete. The

rate should include the full completion of the ceiling. At the time of handing over the site all

necessary repairing work to be considered if required. The work to be completed as per

specification,drawing and approval of the Architect.No Drop or design(if any )will be

considered as extra measurement it will be considered flat ceiling.

SFT 500

2 PARTITION

Providing and fixing partition consisting of 2 " x 2" finished sal wood section without sap and

joints at maximum 2'-0"C/C both horizontally and vertically treated with Pentapehene pale

from STP as antitermite & fire retardent from Viper. To be fixed screwed to the floor and

celing with M.S. cleats. The frame work will be claded with 6mm thk. BWR plywood both

sides and finished with 1.0mm thk. approved shade laminate as per design with approved

adhesive.In case of Partly glazed and low ht.(4'-0"& 6'-0") partition 8mm thk. Etched/Frosted

glass to be provided fixed with 3"x3/4" white beach wood moulding with natural polished

all complete.In case of Low ht. partition ( 4'-0") approved colour soft board should be

embeded in partition with white beach/white ceader wooden beading with natural polish.

The work to be completed as per specification ,design and approval of the Architects.

Note: During joint measurement Partition ht. will be considered upto False ceiling level.In

event of difference in false ceiling ht. the partition ht. shall be calculated on average ht.

a Full Blocked Partition upto 9'-0" SFT 530

b Low ht. partly gazed partition uoto 5'-6" SFT 180

3 DOORS

(a) Full Ht. Partly Glazed / Full Blocked door

ESTIMATE OF FURNISHING WORK FOR BANK OF BARODA - BAHARAMPUR BRANCH

Providing and fixing solid core flush door of 35 mm thk. Finished with 1mm approved colour

laminate .A wooden cover moulding of 3"x3/4" thk.white beech wood with natural polish

shall be provided for floor spring fitted door .8mm thk.Modi Guard / Saint Gobain clear float

glass with etching (approved design) shall be provided with 1 1/2"x3/4" thk. White beech

wood glass moulding ( as per approved design) with natural polish for full ht. partly glazed

door.In case of vision panel door 18"x9" 8mm thk. clear glass with glass moulding with

natural polish to be provided. The rate shall be inclusive of Floor Spring ( heavy duty),4"

brass hinges,door stopper, screws,10" 'H' shape brass handle (Kitch) ,dead lock of

Godrej,key hole cover,night latch, tower bolt,door closer of approved make.All edges of the

door to be covered with necessary lipping with natural polish.The work should be

completed as per specification ,design and approval of Architect.

Note: Wooden door frame fixed to the wall shall have 4" x2 1/2" Teak wood / sal wood (

seasoned ) section with natural polish.The doors fitted with door clousers shall be provided

3" x 1 1/2" white beech wood section with natural polish for door frame work.

i) Manager Chamber's door with etching (3'-0"x7'-0") No 1

ii) Entry to Conference room & pantry area with vision panel (3'-0"x7'-0") Nos 3

iii) Entry to Back office (2'-6"x5'-6") Nos 1

4 SIDE & BACK UNIT

Providing and fixing Side Unit/ Back unit made out of 19mm BWR block board for top, sides

and 6mm thk. BWR ply for back finished with 1.0mm laminate . The drawers to be made out

of 19mm BWR block board in the front cladded with 1.0mm laminate. sides to be made out

of 12mm plywood and bottom,back made out of 6mm plywood and it should play on drawer

sliding channels . Drawer and sliding shutters inside to be synthetic enamel painted.The

Sliding shutters to be made out of 19mm block board with 1.0mm laminate finished and

should play on alluminium channels all four sides. The necessary godrej multipurpose

locks,brass hinges ,4"brass matt finished handle,4"brass matt finished sliding handle etc to

be provided . Inside of the unit to be synthetic enamel painted in matching tone . All the

exposed edeges of the boards/plywoods to be coverd with White beach wood

lippings/mouldings with natural polished all complete.side and back unit top will have 1

1/2"x1" white beech wood moulding with

natural polish at front facia.The work to be completed as per specification,design and

approval of the Architects.SFT 110

5 WRITING LEDGE

Providing and fixing writing ledge as per design made out 19mm block board with necessary

groove patterns ,1.0mm laminate to be cladded. 18mm thk.telephone black granite with bull

nosed moulding (double) at facia to be provided on top of the writing ledge.A divider made

of 19mm thk.block board to be provided. Whit beach/ White ceader lipping with natural

polish to be used in all exposed areas. Inside of writing ledge to be enamel painted.The work

to be completed as per design and approval of the architect.

NO 1

6 PANTRY COUNTER WITH UNDER STORAGE

providing and fixing in position pantry counter of 2'-0" wide made out of 19mm thk kotah

stone embedded into wall for top and 19mm BB for sides.the pantry counter should have

storage in below.Storage shutter is to be made out of 19mm thk BWP block board with

1.0mm thk laminate finish. 19mm thk jet black granite with bull nosed moulding at facia

should placed on kotah stone.The rate will include multipurpose lock,ss finish 4" long

handle, hinges and other necessary hardware.All internal surface is to be synthetic enamel

painted.The work should be completed as per design,specification and approval of the

architect.

Rft 9

7 LUNCH COUNTER

Providing and fixing in position Lunch counter fabricated out of 19 mm thick ply finished

with 1.0mm thk. Laminates on top & sides. 19mm ply finished with synthetic enamel

painted to be provided as a support whereever necessary as per Architects Instructions.The

rate is inclusive of cut-out for sink on counter top. The necessary t.w. moulding/lipping with

polish and necessary hardware shall be provided as per design.The work is to be completed

in all respects as per design,design and approval of the achitect.

RFT 10

8 PILLAR CLADDING

Providing & fixing in position column cladding consisting of 6mm BWR plywood,1mm thk.

laminate. The pillar cladding will have 6mm block board plank ,1mm thk laminate as shown

in drawings. The exposed edges of BB/Ply should cvered with white beech/ceader lipping

with natural polish. The item is to be completed in all respects as per design,direction &

approval of the architect.

SFT 150

9 LESS:

BUYBACK of existing dismantled Partitions, Counters, of the Bank which will not be

reused & removing them from the Bank's premises.Tender will be rejected if the

contractor does not quote lumpsum amount.

Job 1

TOTAL - B

SL. PARTICULAR Qty Unit Rate Amount

Part 1 : light point wiring

1 Supply,laying, connection & testing of light,

fan point, wiring by 2x1.5mmsq(2x3/.029) +

1x1mmsq PVC insulated copper flexible wire

maintaining the colour code as per direction in

PVC conduite of 20mm with ISI mark 1.5 pvc wall thk.

to conceal in wall partition mending

good the damage, complete with pvc circular

box, bend to be done as per drawing

including 3 point ceiling rose where ever

required. GI saddle to be used for fixing,

pvc conduite/ flexible pipe may use

if requied in partition wall. All pvc pipes

should be with ISI mark. No joints will be

allowed inside pipe.Light, fan & plug point

complete with modular type switch plate &

MS box . Including the main circuite line

2x2.5mmsq+1x1.5mmsq earth PVC insulated

Cu. Wire,maintaining the colour code. Circuite

line for lighting switch board ,6Amps plug

board are to be drawn from lighting DB to

Lighting board & 6A plug point board, 6/16 Amps

plug point line are to be drawn from power DB.

3Nos lighting board/ 03 Nos.6Amps plug

are to be connected from one circuite

& 02 Nos. 6/16 plug to be connected

from one circuite(Lighting S.Board height-32" from

floor).

a) Lighting point complete with modular type

switch, plate, M.S. conceal box.

Point - 1 Light point control by 01 switch. 12 Nos



b) Exhust fan point same as item No. 1a

complete with modualr type switch plate &

MS conceal box & 3 pin ceiling rose. 3 Nos

c) Wall bracket point as above complete

with modular type switch,plate & M.S. conceal

box. Including one 2pin plug socket,front

plate & conceal box at fan end. Ht at 6'6" . 6 Nos.

ESTIMATE FOR ELECTRICAL WORK OF BOB - BAHARAMPUR BRANCH

d) Call bell point same as above complete with

modular type push switch,plate & M.S. conceal

box with Din - Dong type bell. 2 No.

e) Ceiling fan point as above complete with modular

type switch, modular plate & conceal box.

The rate is inclusive of 300 W electronics regulator.

( One Manager + One on main entrance) 2 Nos.

f) One 6A, 5pin socket with control switch to provide one each

lighting board except toilet. 5 Nos.

Total Of Part 1 0.00

2 Part : 2 RAW POWER WIRING

a) Supply, Laying of Circuite line2x2.5mmsq +1x

1mmsq PVC insulated copper wire form LDB to 6/16A or

6Amps Plug point. Also note that 03 Nos 06 amps (on table)

Plug to be connected from one circuite line.

rest are same as item No 1. 120 Mts

b) Supply, Fixing & connection of modular type

6 amps Plug switch complete with Ms box Socket

switch above table at 32" height fr. Floor. 8 No.

c) - Do - but 16 Amps 6pin socket with 16amps

switch for raw/UPS power point. ( 01 No plug

connected from one circuite.)rest as item no 1

(Ht.of Plug point as per advice of consultant). 3 No.

Total Of Part 2

Part : 3

SUPPLY, FIXING & CONNECTION

3 OF LIGHT FITTINGS WITH LAMP / FANS :

a) Supply, installation,testing and commissioning of 2'-0"x2'-0"

Mirror Optic(LHCC22236127) Havells makewith 2x36WFP-L(HF)lamp 10 Nos

b) 6" dia PL Spot (LHOC85218354) Havells make with

2x18W PL-C/DU-CFL lamp 12 Nos

c) Wall mountaing fan 400 mm dia 230 volt

A.C.( Crompton/Orient ) 6 Nos.

Total Of Part 3.

Part : 4, UPS WIRING :

4 Supply, fixing & connection of UPS

circuite line with 2x2.5+1x1.5mmsq through

MS conduite 20mmdia 16 SWG wall

tickness, with ISI mark, to lay from UPS MCB

DB to plug point board.Rest same as item no.1

Two nos point to be connected from One

circuite . 150 Mts

a) Suppy, fixing of 2x6Amps 5 pin socket + 1x16

Amps 6 pin socket in single board (under

table) + 1 x 16 A switch in another board

above table as per direction.(under table Ht22") 8 Set

b) - Do - but 3x6/16, 6pin socket with 3x16A switch to

provide near HUB rack& line printer, ATM are

to be connected from UPS power. (3plug + 3switch in one board)

To draw 2 separate power from 2 nos. separate DB. 2 Set

c) Supply, laying & connection of 4x6mmsq +2x4mmsq

PVC insulated copper conductor cable ( FRLS) 25mm dia through

PVC regid/flexible conduit from the UPS incomming

MCB box to UPS. 55 Mt.

d) Supply, laying & connection of 2x6mmsq +1x4mmsq

PVC insulated copper conductor cable ( FRLS) through

PVC regid/flexible conduit from UPS out

going to UPS DB 55 Mt.

e) One 20A, 2pin earth metal plug socket with 20A, SPMCB to provide

outside "Locker Room" including metal enclosure plug top, for

connection internal wiring of locker room. One 3core 2.5sqmm, PVC

insulated copper flexible cable to provide through metal flexi pipe

for protection complete. 1 Set

f) UPS incomming power to drawn by 6mm 4Core

Cu. Conductor PVC insulated armoured cable

with 2nos of bare copper wire of 14 SWG 30 Mt.

g) Supply , installation & tremination of 4 nos 40 Amps

DP MCB with Metal enclouser for UPS out going + incoming

Line .(for 5KVA 2 nos UPS unit) 1 Set

h) Supply & installation of UPS incomming

40 Amps 4 pole MCB MDS make in MS enclouser for Incoming

Line as per instruction of consultant. 2 No.

i) Supply, installation and termination of UPS

outgoing power distribution system with

12 Way SPN DB comprising 8x10Amps SP

MCB & 40 Amps DP RCBO 300MA as main.

MDS make IP -42 Double Door. 1 Nos

Total Of Part 4.

5 MAIN DB'S

(a) Supply,fixing and connection of prefabricated ready

made D.B Havell's/MDS make double door 4way

TPN MCB D.B. for power along with following complete:

6way TPN MCB DB with

63A 4 pole MCCB as main ( POWER DB).

20 Amps SP MCB - 10 Nos.+16A SPMCB - 3Nos.

+ 10A SPMCB - 5 Nos

including Neutral Bar. 1 Set

( b ) 150x100mm enamal Danger board 440 volt.

One board to fixed on each D.B. 1 Nos

( c) Supply, fixing connection with main cable & outgoing busbsr

complete with all material 100A TPN ,SFU, HRC fuse type including

enclosure, 1no cable end box to fix on angle iron frame

(near SEB supply from KWH meter) 1 No

Total of Part 5

Part : 6

6 Supply fixing of 100 Amps TPN HRC type SFU

at SEB for main incomming on MS angle.

frame & 01 nos Cable end box including necessary wire,PVC tape

connection. L& T make for main incoming end 1 No.

Total Of Part 6

7 Labour charges for removing,checking,testing,spray painting,

minor repairing of existing ceiling and wall mounted fan

and refixing the same and celing fan " S" hook cutting

and plastering.

a) Celing fan with regulator 2 No.

b) Celing fan " S" hook cutting and necessary plastering 2 No.

Total Of Part 7

8 LESS:

BUYBACK of existing lights fixtures

of the Bank & removing them from the Bank's premises.

Tender will be rejected if the contractor does not

quote below items.

( a) Existing Tube lights with one no lamp 10 Nos

( b ) Existing wall bracket fan 4 Nos

( c ) Existing 2'x2' mirror optic 18 Nos

Total Of Part 15.

Summary Sheet Amount

Part 1 Light Point wiring.

Part 2 Raw power point.

Part 3 Light Fittings.

Part 4 UPS wiring.

Part 5 Main panel

Part 6 Main Incomming Switch Fuse Unit.

Part 7 Labour charges for repairing of Existing ceiling fan

Part 8 Less Buy Back Items

Grand Total Rs :-

SL NO. PARTICULARS AMOUNT

A CIVIL WORKS FOR BRANCH

B FURNISHEING WORKS FOR BRANCH

C ELECTRICAL WORKS

GRAND TOTAL

ESTIMATE FOR PROPOSED BANK OF BARODA - BAHARAMPUR BRANCH

SUMMARY SHEET (ABSTARCT)

Main Entry

TOILET

LOCKERROOM

MAIN ROAD

BackEntry

UP

UP

PANNEL

y o u d r e a m i tw e m a k e i t

REVISED FURNITURE LAYOUT OF BOB -BAHARAMPUR BRANCH( Gr. Fl.)

NOTES :

1. This drawing is the property of Dearch architects (P) Ltd. & can not be used without their written permission.2. Drawing shall not be scaled written dimensions are to be followed.3. This drawing to be read along with other relevant drawings.4. Any variation between the drawing & the specification should be brought to the notice of the architects in writing prior to the construction.5. For R.C.C. details refer structural engineers drawings.

DRAWING TITLE :

REV. NO. CHK. BY

REVISED FURNITURE LAYOUT OF BOB -BAHARAMPUR BRANCH(Grd. fl.)

DELHI KOLKATA MUMBAI KOCHI BANGALORE CHENNAI HYDERABAD

Any queries in the drawing should be clarified prior to execution.

SCALE : nts REF.: DE ARC / KOL/ BOB/BAHARAMPUR.

after execution. This must not be used by anyone without permission.This is the property of DEARCH ARCHITECTS(P) LTD and should be returned

DRAWN BY : RITABRATA.

REVISED FURNITURE LAYOUT OF BOB - BAHARAMPUR BRANCH

APPD. BY : C.C DATE : 11/06/2012 NO : 3


DEARCH ARCHITECTS PRIVATE LIMITEDC-507 Basement, chittaranjan park,New Delhi-110019Fixed line: +91-11-262 72363,262 72364Tele Fax: +91-11-262 72347E-mail :[email protected]

E W

S

N

A.C AREA = 1495.58 SFT.

* Window Sill = 2'-5"* Window Height = 5'-6"

* False Ceiling Height = 9'-0"

* Beam Drop = 8"* Lintel Ht. = 7'-0"

MAINSWITCH

Officer

BranchHost

Sal

esO

ffice

r

MIDOFFICE

P.B.P

CSR

UT UT UT UT HC

Staff

Offi

cer

BACKOFFICE

Staff

EXISTING CASH

EXISTINGBRANCH HEAD

CABIN

SALES&

SERVICE

Staff

CSR

NON A.C AREA = 563.43 SFT.

Full Height Partly Glazed Partition

12'-5

"

10'-9"

1'-7

"1'-3"

= EXISTING PARTITIONS

= PROPOSED PARTITIONS

PRO

DU

CED

BY

AN

AU

TOD

ESK

ED

UC

ATI

ON

AL

PRO

DU

CT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPR

OD

UC

ED B

Y AN

AU

TOD

ESK ED

UC

ATIO

NA

L PRO

DU

CT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

HIS

EXISTINGADVANCEDEPTT.

LAND-LORDAREA

HER

PROPOSEDLAUNCH

COUNTER

EXISTINGRECORDROOM

STOREROOM


NOTES :


DRAWING TITLE :

REV. NO. CHK. BY



SCALE : nts REF.: DE ARC / KOL/ BOB/BARAHANAGAR.



APPD. BY : C.C DATE : 30/06/2012 NO : 4



E W

S

N


* True Ceiling Height = 11'-0"


CLOSEDDOORCLOSED

DOORCLOSEDDOOR

DN

CLOSEDDOOR

CLO

SED

DO

OR

REVISED FURNITURE LAYOUT OF BOB -BAHARAMPUR BRANCH(1st Fl.)

REVISED FURNITURE LAYOUT OF BOB -BAHARAMPUR BRANCH(Grd. fl.)

REVISED FURNITURE LAYOUT OF BOB - BAHARAMPUR BRANCH

UPSROOM

14'-4"

10'-4

"

PROPOSEDCONFERENCE

ROOM


= FULL HT. PROPOSED PARTITIONS

D.C.

OFFICERINCHARGE

STAFF

EXISTINGRECORDROOM

18'

11'

A.C AREA = 568.84 SFT.


PROPOSEDKITCHENCOUNTER

8'-9"12'-2

"

8'-3"19'-1

1"

15'-3"

PRO

DU

CED

BY

AN

AU

TOD

ESK

ED

UC

ATI

ON

AL

PRO

DU

CT


OD

UC

ED B

Y AN

AU

TOD

ESK ED

UC

ATIO

NA

L PRO

DU

CT


Main Entry

MAIN ROAD

BackEntry

UP

PANNEL


PROPOSED FALSE CEILING & LIGHTINGLAYOUT OF BOB - BAHARAMPUR

NOTES :


DRAWING TITLE :

REV. NO. CHK. BY

PROPOSED FALSE CEILING & LIGHTINGLAYOUT OF BOB - BAHARAMPUR



SCALE : nts REF.: DE ARC / KOL/ BOB/BAHARAMPUR.



PROPOSED FALSE CEILING & LIGHTING LAYOUT OF BOB - BAHARAMPUR BRANCH

APPD. BY : C.C DATE : 11/06/2012 NO : 3



E W

S

N

CARPET AREA = 00.00 SFT.


* False Ceiling Height = 9'-0"



= PROPOSED PARTITIONS

PRO

DU

CED

BY

AN

AU

TOD

ESK

ED

UC

ATI

ON

AL

PRO

DU

CT


OD

UC

ED B

Y AN

AU

TOD

ESK ED

UC

ATIO

NA

L PRO

DU

CT


HIS

EXISTINGADVANCEDEPTT.

LAND-LORDAREA

HER

PROPOSEDLAUNCH

COUNTER

EXISTINGRECORDROOM

STOREROOM


NOTES :


DRAWING TITLE :

REV. NO. CHK. BY



SCALE : nts REF.: DE ARC / KOL/ BOB/BARAHANAGAR.



APPD. BY : C.C DATE : 30/06/2012 NO : 4



E W

S

N


* True Ceiling Height = 11'-0"


CLOSEDDOORCLOSED

DOORCLOSEDDOOR

DN

CLOSEDDOOR

CLO

SED

DO

OR

REVISED FALSE CEILING & LIGHTING LAYOUT OFBOB - BAHARAMPUR BRANCH(1st Fl.)

REVISED FALSE CEILING & LIGHTING LAYOUT OFBOB - BAHARAMPUR BRANCH(Grd. fl.)

REVISED FALSE CEILING & LIGHTING LAYOUT OF BOB - BAHARAMPUR BRANCH

UPSROOM

14'-4"

10'-4

"


= FULL HT. PROPOSED PARTITIONS

D.C.

OFFICERINCHARGE

STAFF

EXISTINGRECORDROOM

18'

11'

A.C AREA = 568.84 SFT.


PROPOSEDKITCHENCOUNTER

8'-9"

PRO

DU

CED

BY

AN

AU

TOD

ESK

ED

UC

ATI

ON

AL

PRO

DU

CT


OD

UC

ED B

Y AN

AU

TOD

ESK ED

UC

ATIO

NA

L PRO

DU

CT


Bank of Baroda · Tendererwho will quote the rate must have a local office at ... 11 Amps meter &...

Documents

Transcript of Bank of Baroda · Tendererwho will quote the rate must have a local office at ... 11 Amps meter &...