Assignment 5 Fluids 1 Ahmedawad

Upload
ahmed-awad
Category

Documents
view
9
download
1

Embed Size (px):

description

FLUID MECHANICS (I)Assignment 51- A large tank open to atmosphere is filled with water to a height of 5m from the outlet tap. The tap is now opened and the water flows from the smooth rounded outlet.Determine the velocity at outlet and the discharge Q of the tap if the diameter is 2cm 2- Siphoning out gasoline from a fluid tank. The siphon diameter is 4mm.determine the time required to draw 4 liters of gasoline and the pressure at the siphon top 3- calculate the velocity measured by the pitot-tub4- Calculate the time required to lower the water level in the tank 6m, given that the water jet velocity v=√2gh where h is the head above the jet center liver when the plug was removed 5- For the shown system calculate1\the rate of discharge2\ the pressure head of the 8cm diameter of pipe line3\ the velocity head of the outlet jet4\ sketch the energy grade line (E.L) and (H.G.L)5\ calculate the pressure head P/γ at the top of the system6- The 10-cm pipe will collapse when the pressure inside it is 60KPa below atmospheric pressure. Calculate 1-Hmax2-Q3-the reading of pitot tube 4-sketch the E.L. & H.G.L.