AN ISO 9001 & 14001 COMPANY TENDER DOCUMENT...

AN ISO 9001 & 14001 COMPANY

TENDER DOCUMENT

TENDER No: DLI/CON/685/447

FOR

Construction of balance work of Training Block – 1A, Training Block – 1B,

Training Block – 1C, Training Block – 1D, Administrative Block, Main

Entrance Gate, Gas Godown, Parade Ground, UG Water Tank, Police

Station, ESS Building, Watch Tower 1 & 6, Reserve Office, Director

Residence, Driver Accommodation & Garage, Training Complex-T8 and

Watch Tower 2 at Bihar Police Academy, Rajgir, District Nalanda, Bihar

(Pkg.-3)-Civil, Electrical, and plumbing works

VOLUME – IV

Price Bid/Bill of Quantity

IN FIGURE IN WORDS IN FIGURE IN WORDS

1 2 3 4 5 6 7

1

Construction of balance work of Training

Block – 1A, Training Block – 1B, Training

Block – 1C, Training Block – 1D,

Administrative Block, Main Entrance Gate,

Gas Godown, Parade Ground, UG Water

Tank, Police Station, ESS Building, Watch

Tower 1 & 6, Reserve Office, Director

Residence, Driver Accommodation &

Garage, Training Complex-T8 and Watch

Tower 2 at Bihar Police Academy, Rajgir,

District Nalanda, Bihar (Pkg.-3)- Civil,

Electrical, and plumbing works

23,30,11,385/-

Tenderer's Financial Offer : Rs._________________________________________________________________

(in Figures)

Seal & Signature of Tenderer Rs._________________________________________________________________

(in Words)

AMOUNT in Rs. After adding percentage

below/above/at par

NAME OF WORK : Construction of balance work of Training Block – 1A, Training Block – 1B, Training Block – 1C, Training Block – 1D, Administrative Block, Main Entrance Gate, Gas

Godown, Parade Ground, UG Water Tank, Police Station, ESS Building, Watch Tower 1 & 6, Reserve Office, Director Residence, Driver Accommodation & Garage, Training Complex-

T8 and Watch Tower 2 at Bihar Police Academy, Rajgir, District Nalanda, Bihar (Pkg.-3)- Civil, Electrical, and plumbing works

QUOTING SHEET

NIT No. DLI/CON/685/447 PRICE FORMAT

SL NO. DESCRIPTION

COST PUT TO

TENDER (RS.)

RATE IN PERCENTAGE OF COLUMN (3)

(BELOW/ ABOVE/ AT PAR)

Package -III

(1A) (1B) (1C)

SR CPWD NSR

1 SUB-HEAD : I : EARTH WORK : Rs. 4353362.10 3225077.25 0.00

2 SUB-HEAD : II : CONCRETE WORK : Rs. 50491751.91 551920.10 120540.00

3 SUB HEAD : III : BRICK WORK(Fly Ash) : Rs. 15325422.54 0.00 0.00

4 SUB HEAD : IV : MARBLE WORK : Rs. 9037364.85 0.00

5 SUB HEAD : V : WOOD WORK : Rs. 3594934.61 1643.88

6 SUB HEAD : VI : STEEL WORKS : Rs. 16694659.57 199059.54 955197.84

7 SUB-HEAD : VII : FLOORING : Rs. 30855366.20 0.00 2027902.61

8 SUB-HEAD : VIII : ROOFING : Rs. 523120.45

9 SUB-HEAD : IX : FINISHING : Rs. 4855116.46 1913279.32 9353512.33

10 SUB-HEAD : X : ALUMINIMUM WORK : Rs. 951146.89 499358.13

11 SUB-HEAD : XI : WATER PROOFING : Rs. 5388553.50 0.00 2496740.90

12 SUB-HEAD : XII : PILING WORK : Rs. 136696.64

13 SUB-HEAD : XIII : CARRIAGE Rs. 5480433.42

TOTAL : Rs. 147687929.14 6390338.22 14953893.68

TOTAL Civil 169032161.04

Plumbing 6471163.97Electrical 57508059.99

Grand Total 233011385.00

S U M M A R Y - S H E E T

ENGINEERING PROJECTS (India) LTD

Bihar Police Academy Project, Rajgir

Package -III

Sl. No. Deptt. Item

No.

DescriptionUnit Quantity Rate (Rs) Amount (Rs)

SUB-HEAD : I : EARTH WORK

1 Building

SR

15-06-11

2.8 Earth work in excavation in foundation trenches or drains (not excoding 1.5m in width or 10

sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including

getting out the excavated soil and disposal of surplus excavated soil as directed, within a

lead of 50 m.

2.8.1 All Kind of soil Cum. 340 113.01 38423.4

2 Building

SR

15-06-11

2.6 Earth work in excavation over areas (exceeding 30 cm in depth 1.5 m in width as well as 10

sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m

disposed earth to be levelled and neatly dressed.

2.6.1 All Kind of soil Cum. 58 110.55 6411.9

3 Building

SR

15-06-11

2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming

and watering lead.

Cum.

200 36.48 7296

4 Building

SR

15-06-11

2.10 Excavating trenches of required width for pipes cables etc, including excavation for sockets,

and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the

excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in

depth including consolidating each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed, within a lead of 50 m.

2.10.1 All kinds of soil.2.10.1.2 Pipes, cables etc. exceeding 80mm dia. But not exceeding 300mm dia. Mtr. 0 115.39 0



SCHEDULE OF QUANTITY ITEMS BASED ON SCHEDULE OF RATE BUILDING (SR)

Sheet- 1A

Building Name:- Training Block - 1A, Training Block - 1B, Training Block - 1C, Training Block - 1D and Administrative Block, Main Gate, Gas Godown, Pared Ground,UG

Tank, Police Station, ESS Building,Watch Tower 1, 2 & 6, Reserve Office, Dir. Residence, Driver Accomn. & Garrage and Training Complex (T8)

Page 1

Sl. No. Deptt. Item

No.


5 Building

SR

15-06-11

2.32 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and

saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of

rubbish upto a distance of 50m outside the periphery of the area cleared.

100 Sqm.

200 209.53 41906

6 Building

SR

15-06-11

2.28 Supplying and Filling in plinth with local sand and under floors including, watering,

ramming consolidating and dressing complete.

Cum.5048 115.09 580974.32

7 Building

SR

15-06-11

2.35 Supplying chemical emulsion in sealed containers including delivery as specified.

2.35.1 Chlorphyriphos/Lindone emulsifiable concretrate of 20%. Litre 13883 181.46 2519209.18

8 Building

SR

15-06-11

2.37 Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termits

treatment (including the cost of chemical emulsion)

2.37.1 Along external wall where the apron is not provided using chemical imulsion @ 7.5

liters/sqm of the vertical surface of the substructure to a depth of 300mm including

excavation channel along the wall & rodding etc. complete.

2.37.1.1 With chlorphyriphos/Lindone E.C. 20% with 1% concentration Mtr. 950 25.09 23835.5

2.37.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.55

litres per linear metre including drilling and plugging holes etc.

2.37.2.1 With chlorphyriphos E.C. 20% with 1% concentration Mtr. 950 26.79 25450.5

2.37.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole,

300mm apart including drilling and plugging 12mm diameter holes with cement mortar 1:2

(1 cement : 2 coarse sand) to match the existing floor.

2.37.3.1 With chlorphyriphos E.C. 20% with 1% concentration Sqm. 7765 138.52 1075607.8

2.37.4 Treatment of existing masonry using chemical emulsion @ one litre per hole, 300mm

interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1

cement : 2 coarse sand) to the full depth of the hole.

2.37.4.1 With chlorphyriphos E.C. 20% with 1% concentration Mtr. 950 36.05 34247.5

Page 2

Sl. No. Deptt. Item

No.


Total of Sub-Head - I 4353362.1

SUB-HEAD : II : CONCRETE WORK

10 Building

SR

15-06-11

4.5 Providing and laying in position cement concrete of specified grade excluding the cost of

centring, shuttering, all work upto plinth level.

4.5.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

(Note:- Ready Mix Concrete (RMC) using PPC Cement to be used confirming to IS :

1489 (Part-I)

Cum.

1690 1595.94 2697138.6

11 Building

SR

15-06-11

4.25 Providing and laying damp proof course 50mm thick with cement concrete 1:2:4 (1 cement

: 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Note:- Used PPC Cement to be used conforming to IS: 1489 (Part-I)

Sqm

1561 153.15 239067.15

12 Building

SR

15-06-11

4.26 Extra for providing and mixing waterproofing material in cement concrete work in

proportion recommended by the manufacturers.

Per bag of

50 Kg. of

cement.505 25.60 12928

13 Building

SR

15-06-11

4.27 Applying a coat of required petroleum bitumen of penetration 80/100 of approved quality

using 1.7kg/m2

on damp proof course after cleaning the surface with brushing and finally

with a piece of cloth lighting, soaked in kerosene oil.

Sqm

1561 57.23 89336.03

14 Building

SR

15-06-11

4.6.2 Providing and laying cement concrete internal walls, return walls, walls (any thickness)

including attached Plasters, Colume, Piers, Abutments, Pilars, Post, Structs, buttresses,

string or lacing courses, parapets coping, bedblocks, anchor blocking, plin window sills, fills

etc. up to floor five level excluding the cast of centring shuttering and finishing 1:11/2:3 ( 1

: Cement : 1 1/2 Coarse Sand : 3 grades tone aggregate 20,, nominal size.


1489 (Part-I)

Cum.

185 2963.30 548210.5

Page 3

Sl. No. Deptt. Item

No.


15 Building

SR

15-06-11

5.42 Providing and laying in position machine batched, machine mixed and machine vibrated

design mix cement concrete of specified grade for reinforced cement concrete structural

elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grade

reinforced cement concrete.


1489 (Part-I)

A With all labour, material and machinery like batching plant etc

a1 All work upto plinth level Cum. 1100 2837.02 3120722I b1 Walls columns, pillars, posts and struts etc. Cum. 860 2992.21 2573300.6II c1 Beams, Plinth beams, griders, bressumers, contilevers, Suspended floors lintels roofs and

staircases including spiral staircases, shelves etc.

Cum.2142 3112.54 6667060.68

B Labour rate for pouring, spreading, compacting, curing etc (Concrete shall be supplied by

EPI through batching plant, transit mixer and cocrete pump. Concret pump shall be provided

for slab concreting only.)

a2 All work upto plinth level Cum. 1100 0b2 Walls columns, pillars, posts and struts etc. Cum. 860 0c2 Beams, Plinth beams, griders, bressumers, contilevers, Suspended floors lintels roofs and

staircases including spiral staircases, shelves etc.

Cum.2142 0

16 Building

SR

15-06-11

5.44 Add or deduct for providing richer or leaner mixer respectively at all floor levels.

5.44.1 Providing M-25 grade R.C.C. instead of M-20 grade R.C.C.


1489 (Part-I)

Cum.

4110 132.14 543095.4

17 Building

SR

15-06-11

5.14 Centring and shuttering including strutting, propping etc. And removal of form for.

5.14.1

Foundations, footings, bases of columns etc. for mass concrete. Sqm3100 104.47 323857

Page 4

Sl. No. Deptt. Item

No.


5.14.2

Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. Sqm

2228 158.42 352959.76

5.14.3 Suspended floors, roofs, landings, balcnies and access platform. Sqm 7060 152.38 1075802.8

5.14.4 Shelves (Cast in situ) Sqm 220 152.38 33523.6

5.14.5 Lintels, beams, plinth bams, griders, bressumers and cantilevers. Sqm 11270 130.70 1472989

5.14.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 4300 202.13 869159

5.14.7 Stairs, (excluding landings) except spiral-staircases. Sqm 1045 197.03 205896.35

5.14.9 Archies Domes, Vaults upto 6 m span Sqm 720 465.23 334965.6

5.14.10 Extra for Archies, Domes, Vaults exceeds 6 m span Sqm 720 236.74 170452.8

18 Building

SR

15-06-11

5.14.13 Vertical and Horizontal lines fins individually or framing box louverd Band, faces and

Eaves Board.

Sqm1178 193.88 228390.64

19 5.14.16 Small lintels not exceeding 1.5m clear span, mouldings as in cornices, window sills, string,

courses, bands, copings, bed plates, anchor blocks and the like.

Sqm268 116.75 31289

20 Building

SR

15-06-11

5.14.14 Extra for Shuttering in circular work (20% of respective catering and shuttering items)

a) Slab Sqm 550 30.48 16764b) Beam Sqm 4230 26.14 110572.2c) Column Sqm 570 40.43 23045.1

21 Building

SR

15-06-11

5.14.17 Edges of slabs and breaks in floors and walls.

Page 5

Sl. No. Deptt. Item

No.


5.14.17.1 Under 20 cms wide Mtr. 1470 56.72 83378.4

22 Building

SR

15-06-11

5.14.20 Weather shade, Chajja, Carpets etc including edge. Sqm3202 244.22 781992.44

23 Building

SR

15-06-11

5.38 Add or deduct for plaster drip course /groove in plastered surface or moulding to R.C.C.

projections.

Mtr.1070 9.86 10550.2

24 Building

SR

15-06-11

5.16 Extra for additional height in centring, shuttering where requirement with adequate bracing

propping etc. including cast of de-shutter and de-centring at all levels, over a height of 3.5m

for every additional height of 1 metre or part thereof suspended floor, roof landing beams

and balconies (plain area to be measured).

Sqm

27500 58.25 1601875

25 Building

SR

15-06-11

5.25.1 Providing, precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate

6mm nominal size) reinforced with 1.6 mm dia mild steel wire including roughening

cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand ) etc. complete

excluding plastering of the jambs, sills and soffits.


50 mm thick Sqm 0 332.66 0

26 Building

SR

15-06-11

5.29 Reinforcement for RCC work including straightening, cutting, bending, placing in position

and binding all complete. Note:- EPI shall supply

steel on recoverable basis as per actual cost.

5.29.7 A Thermo -Mechanically Treated bars(TMTC-500)8 mm dia bars Kg. 110720 52.38 5799513.65.29.7 B Thermo -Mechanically Treated bars(TMTC-500)10 mm dia bars Kg. 33505 51.87 1737904.355.29.TE Thermo -Mechanically treated Bar TMT FE- 500, 12 to 32mm Kg. 361692 51.28 18547565.76

27 Building

SR

15-06-11

5.33 Providing and fixing in position copper plate as per design for expansion joints. Kg.0 239.80 0

28 Building

SR

15-06-11

5.34 Providing and filling in position, blown bitumen in expansion joints. 100mLx1

cm

Wx1cmD

210 358.00 75180

Page 6

Sl. No. Deptt. Item

No.


29 Building

SR

15-06-11

5.35 Providing and filling in position bitumen mix filler of Proportion 80 kg of hot bitumen, 1 kg

of cement and 0.25 cubic metre of coarse sand for expansion joints

100mLx1

cm

Wx1cmD

306 84.99 26006.94

30 Building

SR

15-06-11

5.36 Providing and fixing in position 12 mm thick bitumen imregnated fibre board conforming to

IS: 1838 including cost of primer, sealing compound in expansion joints.

100mLx1

cmD 225 342.69 77105.25

31 Building

SR

15-06-11

5.37 Providing and fixing sheet covering over expansion joints with iron screws as per design to

match the colour/shade of wall treatment.

5.37.1 Asbestos sheet 6 mm thick5.37.1.1 150 mm wide Mtr. 0 47.62 05.37.1.2 200 mm wide Mtr. 0 63.95 05.37.2 Aluminium Fluted Strip 3.15 mm thick5.37.2.1 150 mm wide. Mtr. 36 282.06 10154.165.37.2.2 200 mm wide Mtr. 0 288.44 0

Total of Sub-Head - II 50491751.91

SUB HEAD : III : BRICK WORK(Fly Ash)

35 Building

SR

15-06-11

6.1A Brick work with bricks of class designation 100 A in foundation and plinth in

6.1.14A Cement mortar 1:6 (1 cement : 6 coarse sand).


Cum.5550 2483.62 13784091

36 Building

SR

15-06-11

6.3A Extra for Brick work in superstructure above plinth level upto floor V level. Cum.4760 238.44 1134974.4

37 Building

SR

15-06-11

6.18A Half brick masonry with bricks of class designation 100 A in foundations and plinth in :

Page 7

Sl. No. Deptt. Item

No.


6.18.4A Cement mortar 1:4 (1 cement : 4 coarse sand).


Sqm1050 308.51 323935.5

6.19.A Extra for half Brick masonry in superstructure above plinth level upto floor V level Sqm 938 26.28 24650.64

38 Building

SR

15-06-11

6.21A Extra for providing and placing in portion 2 Nos. 6mm dia M.S bars at every third course of

half brick masonary.

Sqm1050 55.02 57771

Total of Sub-Head - III 15325422.54

SUB HEAD : IV : MARBLE WORK

39 Building

SR

15-06-11

8.2 Providing and fixing 20mm thick mirror polished, machine cut for kitchen platforms, vanity

counters facias and similar locations of required size of approved shade, colour and texture

laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated

with white cement, mixe with matching pigament-epoxy touch ups including rubbing,

curing etc. complete at all levels.


8.2.1.3 Area of each slab over 0.2 sqm but upto 0.5 sqm Rajnagar plain white. Sqm 0 1207.07 0

8.2.6.3 Area of each slab over 0.2 sqm but upto 0.5 sqm Granite of any colour and shade Sqm 1068 2375.96 2537525.28

40 Building

SR

15-06-11

8.3 Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. over

item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as

per design approved by Engineer-in-charge.

8.3.1 Marble work Mtr. 22 69.81 1535.82

8.3.2 Granite work Mtr. 400 113.48 45392

41 Building

SR

15-06-11

8.4 Extra for fixing marble/granite stone over and above corresponding basic item, in facia and

drops of width upto 150 mm with expoxy resin based (Araldite or equivalent) adhesive

including cleaning etc. complete.

Mtr.

480 75.77 36369.6

42 Building

SR

15-06-11

8.5 Extra for providing opening of required size & shape for wash basins/kitchen sink in

Kitchen platform. Vanity counters and similar location in marble/stone work including

necessary holes for pillar taps etc. including rubing and polishing of cut edges etc.complete.

Each

133 9.95 1323.35

Page 8

Sl. No. Deptt. Item

No.


43 Building

SR

15-06-11

8.6 Mirror polishing on marble work/stone work where ever required to given high gloss finish

complete.

Sqm0 95.49 0

44 Building

SR

15-06-11

Marble work gang saw cut (Polished and machine cut) of thickness 18 mm for wall lining

(Veener work) in cement mortor 1:3 (1 Cement : 3 Coarse sand) including pointing with

white cement motor 1:2 (1 White cement : 2 Marble Dust) with and mixture of pigment to

match the marble shade (To be secural to the backing of means of cramps, which shall be

paid for seperating) Note:- Used PPC Cement to be used conforming to IS: 1489 (Part-I)

8.1.1.1.2 White Marble - Raj Nagar Plain , Udaipur Green Marble / Zebra Black Marble - area of

each slab over upto 0.50 sqm.

Sqm21 1533.82 32210.22

45 Building

SR

15-06-11

Providing and fixing expansion hold fastners on CC / RCC / Brick Surface backing

including drilling necessary holes and the cost of bolts etc complete.

8.8.1.3 Fastner with threaded dia 12mm Each 29 32.02 928.58

45a Building

SR

15-06-11

Providing and fixing stone jali 40mm thick throughout (without sunking or moulding in jali

slab in cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement

mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone

jali slab without any chamfers etc

Sqm

2000 3191.04 6382080

Total of Sub-Head - IV 9037364.85

SUB HEAD : V : WOOD WORK

46 Building

SR

15-06-11

9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames,

wrought framed and fixed in position:

9.1.3 Second Class teakwood Cum. 0 53599.04 0

47 Building

SR

15-06-11

9.4 Providing and fixing panelled or panelled and glazed shutters for doors, windows and

clerestory windows including black enamelled M.S. but hinges with necessary screws

excluding. Panelling which will be paid for separately.

Page 9

Sl. No. Deptt. Item

No.


9.4.3.4 35 mm thick Second Class teakwood Sqm 470 1380.12 648656.4

48 Building

SR

15-06-11

9.5 Providing and fixing panelling or panelling and glazing in panelled of panelled and glazed

shutters for doors, windows and clerestory windows (area of opening for panel inserts

excluding portion inside grooves or rebates to be measured) panelling for panelled or

panelled and glazed shutters 25mm to 40mm thick.

9.5.3 Second class teak wood Sqm 470 1102.05 517963.5

49 Building

SR

15-06-11

9.25 Providing and fixing flush door shutters non decorative type, core of block board

construction with frame of 1st class hard wood and well matched teak 3 ply veneering with

vertical grains or cross bands and face veneers on both faces of shutters:

9.25.2 35 mm thick including anodised aluminium butt hinges with necessary screws. Sqm 1295 995.42 1289068.9

50 Building

SR

15-06-11

9.34 Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all

edges of shutters (over all area of door shutter to be measured).

Sqm1225 296.43 363126.75

51 Building

SR

15-06-11

9.37 Extra for cutting rebate in flush door shutters (total area of the shutter to be measured). Sqm640 68.96 44134.4

52 Building

SR

15-06-11

9.47A Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of

average width of aperture 1.4mm with wire of dia. 0.63 mm for doors windows and

clerestory windows including bright finished or/and black enamelled M.S. Butt Hinges with

necessary screws.

9.47.A.1 Second class teak wood. Sqm 0 1560.65 0

53 Building

SR

15-06-11

9.26 Extra for Providing and Fixing Flush Door Shutter 1mm thick laminate of approved shade -

Both side of shutter.

Sqm570 544.56 310399.2

54 Building

SR

15-06-11

Providing and fixing glazed shutters for doors, windows and clerestory windows using

10kg/square meter (4 mm thick) glass panels including black enamelled M.S. Butt hinges

with necessary screws.

9.6.3.4 35 mm thick Second class teak wood. Sqm 0 1733.95 0

Page 10

Sl. No. Deptt. Item

No.


55 Building

SR

15-06-11

9.82 Providing and fixing M.S. Grills of requirement pattern in frames of window etc. with M.S.

flats square or round bars etc. all complete.

9.82.2 Fixed to steel window by welding. Kg. 1805 61.40 110827

56 Building

SR

15-06-11

9.85 Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory

window using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both

directions with wire of dia. 0.63 mm.

9.85.1 With second class teak wood beading 62x19 mm Sqm 0 446.69 0

57 Building

SR

15-06-11

9.87 Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm

diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15

cm 1:3:6 mix (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).


Each

0 49.75 0

58 Building

SR

15-06-11

9.218 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not

less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade

with, nuts and screws etc. complete.

9.218.2 250x16 mm Each 511 138.52 70783.72

59 Building

SR

15-06-11

9.219 Providing and fixing aluminium tower bolts anodised (anodic coating not less than grade

AC 10 as per IS: 1868) transparent or dyed to required colour and shade with, nuts and

screws etc. complete.

9.219.1 300x10 mm Each 521 73.90 38501.99.219.4 150x10 mm Each 885 44.13 39055.059.219.5 100x10 mm Each 0 33.16 0

60 Building

SR

15-06-11

9.220 Providing and fixing aluminium pull bolt lock anodised (anodic coating not less than grade

AC 10 as per IS: 1868) transparent or dyed to required colour and shade with, nuts and

screws etc. complete.

Each

221 45.15 9978.15

Page 11

Sl. No. Deptt. Item

No.


61 Building

SR

15-06-11

9.222 Providing and fixing aluminium handles anodised (anodic coating not less than grade AC

10 as per IS: 1868) transparent or dyed to required colour and shade with, nuts and screws

etc. complete.

9.222.1 125 mm Each 832 50.51 42024.329.222.2 100 mm Each 1390 36.57 50832.3

62 Building

SR

15-06-11

9.223 Providing and fixing aluminium hanging floor door stopper anodised (anodic coating not

less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade

with, necessary screws etc. complete.

9.223.1 Single rubber stopper Each 0 19.56 09.223.2 Twin rubber stopper Each 521 53.74 27998.54

63 Building

SR

15-06-11

9.9 Deduct if fixed shutters (without hinges) are provided instead of openable shutters for

doors, windows or cleresory windows with:

9.9.2 Black enamelled M.S Butt hinges with necessary screws. Sqm 0 30.02 0

65 Building

SR

15-06-11

9.26 Extra for Providing and fixing flush door with teak veneering.

9.26.1 On one side Sqm 116 272.28 31584.48

Total of Sub-Head - V 0 3594934.61

SUB HEAD : VI : STEEL WORKS

66 Building

SR

15-06-11

10.7 Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6mm angle iron and

3mm M.S gusset plates at the junction and corners, all necessary fittings complete including

applying priming coat of approved steel primer.

10.7.1 Using flat 30x6mm for diagonal braces and central cross piece. Sqm 95 1518.81 144286.95

Page 12

Sl. No. Deptt. Item

No.


67 Building

SR

15-06-11

10.8 Supplying and fixing rolling shutters of approved make, made of required size of M.S laths

interlocked together through their entire length and jointed together at the end by end locks

mounted on specially designed pipe shaft with brackets, side guides and arrangements for

inside and outside locking with push and pull operation complete including the cost of

providing an fixing necessary 27.5 cm long wire springs grade No. 2 and M.S top cover of

required thickness for rolling shutters.

10.8.1 80x1.25mm M.S Laths with 1.25mm thick top cover. Sqm. 55 1228.93 67591.1510.9 Providing and fixing ball bearing for rolling shutters. Each 18 349.15 6284.7

68 Building

SR

15-06-11

10.1 Extra for providing mechanical device chain and crank operation for operating rolling

shutters.

10.10.1 Exceeding 10.00 sqm and upto 16.80 sqm in area (say average 14 sqm) Sqm. 22 489.21 10762.62

69 Building

SR

15-06-11

10.10A Extra for providing grilled rolling shutters. Sqm.31 223.90 6940.9

70 Building

SR

15-06-11

10.14 Providing and fixing T-iron frames for doors windows and ventilators of mils steel Tee-

Sections, joints miltred and welded with 15x3 mm lugs 10 cm long embedded in cement

concrete blocks 15x10x10 cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate

20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with

fixing clips or with bolts and nuts as required including.

Kg.

2185 69.47 151791.95

71 Building

SR

15-06-11

10.15 Providing and fixing pressed steel door conforming IS code 351 manufactured from

commercial mild steel sheet of 1.25mm thickness including hinges, jamb, lock jamb, bead

and if required angle threshold of mild steel angle of section 50x25 mm or base ties of

1.25mm pressed mild steel welded or rigidy fixed together by mechanical means, adjustable

lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar

guards, lock strike-plate and shock absorbers as specified and applying a coat of approved

steel primer after pre-teatement of the surface as directed by Engineer-in-charge

10.15.1 Profile B Mtr. 1840 258.34 475345.610.15.2 Profile C Mtr. 2894 278.91 807165.54

Page 13

Sl. No. Deptt. Item

No.


10.15.3 Profile E Mtr. 520 311.57 162016.4

72 Building

SR

15-06-11

10.33 Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing

including applying a priming coat of approved steel primer.

10.33.2 E.R.W. tube 40 mm nominal dia Kg. 19263 113.10 2178645.3

73-A Building

SR

15-06-11

10.12 Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel

sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs

embedded in cement concrete blocks 15x10x10 cm of 1:3:6 ( 1 cement : 3 coarse sand : 6

graded stone aggregate 20mm nominal size) or with woodenplugs and screws or rawl plugs

and screws or with fixing clips or with bolts and nuts as required, including providng and

fixing of glass panes with glazing clips and special metal-sash putty of approved make

complete including applying a priming coat of approved steel primer; excluding the cost of

metal beading and other fitting except necessary hinges or pivots as required. Note:- Used

PPC Cement to be used conforming to IS: 1489 (Part-I)

10.12.1 Doors Sqm. 3335 2104.62 7018907.7

73-B Building

SR

15-06-11

10.13 Extra for providing and fixing steel beading of approved shape and section with screws

instread of glaxing clips and met. Sash putty in steel doors, windows, Ventilators and

comosite units.

10.13A Steel Doors Sqm. 396 162.76 64452.9610.13B Steel Windows Sqm. 2935 195.24 573029.4

74 Building

SR

15-06-11

10.3 Structural Steel work riveted or bolted in rolled section, builtup sections, plate and inserts,

trussess and frame work, including cutting, hoisting, fixing in position and applying a prime

coat of approved steel primer etc. all complete.

Kg.

105230 47.28 4975274.4

76 RCD

4/2010

8.19 Fencing with welded steel wire fabric 75 mm x 50 mm providing 1.2M high fencing with

Angle Iron post 50m x 50m x 6mm at 3 meter centre to centre with 0.4m embedded in M-15

Grade cement concrete, corner end and every 10th Post to be strutted, provided with welded

steel wire fabric of 75 x 50 mm or 75 x 25 mm mesh and fixed to ironpost by flat iron 50 x

5mm and bolted etc all complete.

Mt.

144 362.25 52164

Page 14

Sl. No. Deptt. Item

No.


Total of Sub-Head - VI 0 16694659.57

SUB-HEAD : VII : FLOORING

80 Building

SR

15-06-11

11.4 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate)

finished with a floating coat of neat cement including cement slurry, but excluding the cost

of nosing of steps etc. complete.


11.4.2 40mm thick with 20mm nominal size stone aggregate. Sqm. 560 148.39 83098.4

81 Building

SR

15-06-11

11.10 Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse

sand) finished with a floating coat of neat cement.


11.10.1 18 mm thick Sqm. 56 133.25 7462

82 Building

SR

15-06-11

11.36 Providing and laying Ist quality Ceramic glazed wall tiles confirming to IS : 15622

(thickness to be specified by manufacturer) of approved make in all colours, shades except

burgundy, bottle green , black of any size as approved by Engineer-in-Charge in skirting,

risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse

sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white

cement mixed with pigment of matching shade complete.


Sqm.

7223 647.03 4673497.69

83 Building

SR

15-06-11

11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by

the manufacturer) of lst quality conforming to IS: 15622 of approved make in colours such

as white, ivory, Grey, Fume Red, Brown, laid on 20 mm thick Cement motar 1:4 ( 1 cement

: 4 coarse sand) including pointing the joints with white cement and matching pigment etc.

complete.


Sqm.

10500 704.43 7396515

Page 15

Sl. No. Deptt. Item

No.


84 Building

SR

15-06-11


the manufacturer) of lst quality conforming to IS: 15622 of approved make in colours such

shades except white, ivory, Grey, Fume Red, Brown, laid on 20 mm thick Cement motar 1:4

( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching

pigment etc. complete.


Sqm.

0 738.70 0

85 Building

SR

15-06-11

11.20 Providing and fixing glass strips in joint of terrazo/cement concrete floors.

40 mm wide 4 mm thick Mtr. 1010 15.52 15675.2

86 Building

SR

15-06-11


the manufacturer) of lst quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY,

KAJARIA or equivalent make in colours such as white, ivory, Grey, Fume Red, Brown, laid

on 20 mm thick Cement motar 1:4 ( 1 cement : 4 coarse sand) including pointing the joints

with white cement and matching pigment etc. complete.


Sqm.

155 884.79 137142.45

87 Building

SR

15-06-11


the manufacturer) of lst quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY,

KAJARIA or equivalent make in colours such as white, ivory, Grey, Fume Red, Brown, laid

on 20 mm thick Cement motar 1:4 ( 1 cement : 4 coarse sand) including pointing the joints

with white cement and matching pigment etc. complete.


Sqm.

2340 927.99 2171496.6

88 Building

SR

15-06-11

11.41 Providing and laying vitrifed floor tiles skirting (thickness to be specified by the

manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of

approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement

: 4 coarse sand) including grouting the joints with white cement and matching pigments etc,

complete. (Flooring and Skirting)


11.41.2 Size of Tile 60x60 cm Sqm. 8013 1187.17 9512793.21

Page 16

Sl. No. Deptt. Item

No.


89 Building

SR

15-06-11

11.42 Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved

by Engineer-in-charge) over 20 mm (average) thick base of Cement motar 1:4 ( 1 cement : 4

coarse sand) laid and jointed with grey cement slurry including rubbing and polishing

complete with.


11.42.7.1 Rajnagar plain white marble 18mm thick above 0.10 sqm upto 0.20 sqm. Sqm. 635 1275.27 809796.4511.42.14 Udaipur Green Marble Sqm. 1080 1330.88 1437350.4

90 Building

SR

15-06-11

11.41A Tile work in skirting, risers of steps and dado over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including

pointing in white cement mixed with pigment of matching shade complete.


11.41A.1 Marble tiles (polished) Raj Nagar 8 mm thick Sqm. 135 676.71 91355.85

91 Building

SR

15-06-11

11.48 Kota stone slab flooring over 20 mm (Av.) thick base laid over and jointed with grey cement

slurry mixed with pigment to match the shade of the slab including rubbing and polishing

complete.


11.48.1 25mm thick. Sqm. 5705 680.96 3884876.8

92 Building

SR

15-06-11

11.49 Kota stone slab 25mm thick in riser of steps, skirting, dado and pillars laid on 12mm (Av.)

thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry

mixed with pigment to match the shade of the slab including rubbing and polishing

complete


Sqm.

525 827.14 434248.5

93 Building

SR

15-06-11

11.46 Extra for nosing in marble stone for treads Mtr.1495 92.60 138437

94 Building

SR

15-06-11

11.47 Extra for Marble stone flooring in treads of steps. Not Exceeding 30 cm in width. Sqm.485 109.10 52913.5

Page 17

Sl. No. Deptt. Item

No.


95 Building

SR

15-06-11

11.58 Extra for nosing in steps and treads of kota stone slab Mtr.325 25.43 8264.75

96 Building

SR

15-06-11

11.59 Extra for kota stone floooring in steps and trades not exceeding 30 cm in width. Sqm.80 5.53 442.4

Total of Sub-Head - VII 0 30855366.2

SUB-HEAD : VIII : ROOFING

99 Building

SR

15-06-11

12.38 Providing gola 75x75mm in ceent concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone

aggregate 10mm and down gauge) including finishing with cement mortar 1:3(1 cement : 3

coarse sand) as per standard design.


Rmt.

9625 52.30 503387.5

100 Building

SR

15-06-11

12.39 Making khurras 45 x 45 cm with average minimum thickness of 5cm cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over PVC sheet

1m x 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand)

and a coat of neat cement rounding the edges and making and finishing the outlet complete.


Each

235 83.97 19732.95

Total of Sub-Head - VIII 0 523120.45

SUB-HEAD : IX : FINISHING

101 Building

SR

15-06-11

13.11 12mm cement plaster of mix

13.11.4 1:6 (1 cement : 6 coarse sand) Note:- Used PPC Cement to be used conforming to IS:

1489 (Part-I)

Sqm.20730 52.64 1091227.2

Page 18

Sl. No. Deptt. Item

No.


102 Building

SR

15-06-11

13.12 15 mm cement plaster on rough side of single or half brick wall of mix.


1489 (Part-I)

Sqm.16120 61.23 987027.6

103 Building

SR

15-06-11

13.13 20mm cement plaster of mix


1489 (Part-I)

Sqm.9250 88.27 816497.5

104 Building

SR

15-06-11

13.24 6mm cement plaster to ceiling of mix


1489 (Part-I)

Sqm.26620 44.90 1195238

105 Building

SR

15-06-11

13.72 White washing with whiting to given an even shade:

13.72.1 New work (three or more goats) Sqm. 26620 5.95 158389

106 Building

SR

15-06-11

13.77 Distempering with oil bound washable distemper of approved brand and manufacture to

give an even shade.

13.77.2 New work (two or more coats) over and incluidng priming coat with cement primer. Sqm. 0 34.44 0

107 Building

SR

15-06-11

13.77A Distemperig with 1st quality washable distemper (ready made) of approved manufacturer

and of required shade and colour complete. As per manufacture's specifications.

Two or more coats on new work. Sqm. 0 21.26 0

108 Building

SR

15-06-11

13.78 Applying one coat of cement primer of approved brand and manufacture on wall surface.

13.78.1 Cement Primer Sqm. 0 15.39 0

Page 19

Sl. No. Deptt. Item

No.


13.78.2 Distemper Primer Sqm. 0 16.67 0

109 Building

SR

15-06-11

13.79 Finishing walls with water proofing cement paint of approved brand and manufacture and of

required shade to give an even shade.

13.79.1 New work (three or more coats) Sqm. 0 50.85 0

110 Building

SR

15-06-11

13.92 Wall painting with plastic emulsion paint of approved brand and manufacture to give an

even shade:

13.92.1 Two or more coats on new work Sqm. 0 39.97 0

114 Building

SR

15-06-11

13.94 Painting with synthetic enamel paint of approved brand and manufacture of required colour

to given an even shade:

115 13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary pain of

approved brand and manufacture.

Sqm.7385 54.34 401300.9

116 Building

SR

15-06-11

13.101 French Sprit Polishing two or more coats on wood work including a coat of wood filler. Sqm.26 71.09 1848.34

119 Building

SR

15-06-11

6.31A Tiles brick masonry work 5 cm thick with the bricks of class designation 100 A in cement

mortor 1:3 ( 1 cement : 3 coarse sand) in superstructure.


Sqm.

612 282.66 172987.92

120 Building

SR

15-06-11

13.63.1 Pointing on tile brick work with cement mortor 1: 3 (1 cement : 3 coarse sand ) Flush

Pointing.


Sqm.

612 50.00 30600

Total of Sub-Head - IX 0 4855116.46

SUB-HEAD : X : ALUMINIMUM WORK

Page 20

Sl. No. Deptt. Item

No.


122 Building

SR

15-06-11

24.1 Providing and fixing anodised aluminum work for doors, windows, ventilators and

partitions with extruded built up standard tubular and other sections of approved make

conforming to IS: 733 and IS: 1285 anodised transparent or dyed to required shade

according to IS: 1868. (Minimum anodise coating of grade AC 15) fixed with rawl plugs

and screws or with fixing clips, or with expansion hold fastners including necessary filling

up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc.

Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically

wherever required including cleat angle, Aluminium snap beading for glazing/panelling,

C.P. brass/stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-Charge.(Glazing and panelling to be paid for separately.)

24.1.1 For fixed portion. Kg. 1030 305.28 314438.4

105 Building

SR

15-06-11

24.1.2 For shutters of doors, windows and ventilators including providing and fixing hinges/pivots

and making provision for fixing of fittings wherever required including the cost of PVC

neoprene gasket required (Fittings shall be paid for separately).

Kg.

1815 319.90 580618.5

125 Building

SR

15-06-11

24.2 Providing and fixing 12 mm thick prelaminated three layermedium density (exterior grade)

particle board Grade I, Type II conforming to IS:12823 bonded with phenol formaidhyde

synthetic resin, of approved brand and manufacture in panelling fixed in aluminium doors,

window shutters and partition frames, with C.P. brass/stainless steel screws etc. complete as

per architectural drawings and direction of engineer-in-charge.

24.2.1 Pre-laminated particle board with decorative lamination on one side and balancing

lamination of otherside.

Sqm.0 793.80 0

24.2.2 Prelaminated particle board with decorative finish on both side. Sqm. 15 833.68 12505.2

126 Building

SR

15-06-11

24.3 Providing and fixing glazing in aluminium door, window, ventilator, shutters and partitions

etc. with PVC/Neo Prene gasket etc. complete as per the architectural drawings and the

directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic

item)

24.3.1 With glass panes of 4.0 mm thickness (weight not less than 10.0kg/sqm.) Sqm. 27 554.94 14983.3824.3.2 With glass panes of 5.50 mm thickness (weight not less than 13.75kg/sqm.) Sqm. 24 677.73 16265.52

Page 21

Sl. No. Deptt. Item

No.


127 Building

SR

15-06-11

24.4 Providing and fixing double action hydraulic floor spring of approved brand and

manufacture (conforming to IS:6315), for Aluminium doors including cost of cutting floor

as required, embedding in floors and cover plates etc. complete as per direction of Engineer-

in-Charge.

Each

7 1762.27 12335.89

0

0

Total of Sub-Head - X 951146.89

SUB-HEAD : XI : WATER PROOFING

130 Building

SR

15-06-11

25.8 Providing and laying integral cement based water proofing treatment including prepatation

of surface as required for treatment of roofs, balconies, terraces etc, consisting of following

operations a) Applying and grouting a slurry coat of neat cement using 2.75kg/sqm of

cement admixed with proprietary water proofing compound cleaning the surface before

treatment, b) Laying cement concrete using broken bricks/ bricks bats 25 mm to 100mm size

with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with proprietary water

proofing compound conforming to IS: 2645 over 20 mm thick layer of cement mortar of

mix 1:5 (1 cement : 5 coarse sand) admixed with proprietary water proofing compound

conforming to IS : 2545 to required slope and treating similary the adjoining walls upto 300

mm height including rounding of junctions, or walls and slabs.

25.8.1 With average thickness of 120mm and minimum thickness at khurras as 65mm. Note:-

Used PPC Cement to be used conforming to IS: 1489 (Part-I)

Sqm.13310 404.85 5388553.5

Total of Sub-Head - XI 5388553.5

SUB-HEAD : XII : PILING WORK

Page 22

Sl. No. Deptt. Item

No.


135 Building

SR

15-06-11

23.3 Boring, providing and installing cast in situ single under reamed piles of specified diameter

and length below pile cap in cement concrete piles with mix 1:1.5::3 (1 cement : 11/2 coarse

sand: 3 graded stone aggregate 20 mm nominal size) to carry a safe working load not less

than specified, excluding the cost of steel reinfrement but including the cost of boring with

bentonite solution and the length of the pile to be embedded in pile cap etc. all complete.

(Length of pile for payment shall be measured up to the bottom of pile cap). (Note:- Ready

Mix Concrete (RMC) using PPC Cement to be used confirming to IS : 1489 (Part-I)

23.3.1 300 mm dia piles. meter 317.78 023.3.2 400 mm dia piles. meter 602.56 0

0

136 Building

SR

15-06-11

23.4 Extra over item no. 1 for boring, providing and installing cast in situ double under reamed

piles, instead of single under ream of specified diameter and length. (Only the quantity of

extra bulbs are to be paid).

Each

400.26 0

137 Building

SR

15-06-11

23.7 Vertical load testing of pile in accordance with IS:2911 (Part-IV) including installation of

loading platform and preparation of pile head or construction of test cap and dismantling of

test cap after test etc. complete as per specification & the direction of Engineer-in-Charge.

23.7.1 Single Pile 23.7.1.1 Upto 50 tonne capacity pile cost per test per test 23595.87 023.7.1.2 Above 50 tonne & upto 100 tonne capacity pile per test 33276.26 0

138 Building

SR

15-06-11

23.8 Cyclic vertical load testing of pile in accordance with IS Code of practice IS : 2911 (Part-

IV) including preparation of pile head etc. for :-

23.8.1 Single pile23.8.1.1 Upto 50 tonne capacity pile per test 4 13915.48 55661.9223.8.2 Group of two pile

23.8.2.1 Upto 50 tonne capacity each per test 27831.04 0

139 Building

SR

15-06-11

23.9 Lateral load testing of single pile in accordance with I.S. Code of practice I.S. : 2911 (Part-

IV) for determining safe allowable lateral load on pile :

Page 23

Sl. No. Deptt. Item

No.


23.9.1 Upto 50 tonne capacity pile per test 4 13915.48 55661.92

140 Building

SR

15-06-11

5.29 Reinforcement for RCC work including straightening, cutting, bending, placing in position

and binding etc. all complete.

5.29.1 Thermo-mechanically treated bar TMT FE-500

Note: EPI shall supply steel on recoverable basis as per actual cost.

Kg49.24 0

141 Building

SR

15-06-11

15.3 Demolishing RCC work including stacking of steel bars and disposal of unserviceable

material with 50 meter lead.

Cum60 422.88 25372.8

142 Building

SR

15-06-11

5.42 Providing and laying in position machine batched, machine mixed and machine vibrated

design mix cement concrete of specified grade for reinforced cement concrete structural

elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grade

reinforced cement concrete.


1489 (Part-I)

5.42.1 All work upto plinth level Cum. 2837.02 0

143 Building

SR

15-06-11

5.14 Centring and shuttering including strutting, propping etc. And removal of form for.

5.14.1 Foundations, footings, bases of columns etc. for mass concrete. Sqm 104.47 0

5.14.5 Lintels, beams, plinth bams, griders, bressumers and cantilevers. Sqm 130.70 0

144 Building

SR

15-06-11

5.44 Add or deduct for providing richer or leaner mixer respectively at all floor levels.

5.44.1 Providing M-25 grade R.C.C. instead of M-20 grade R.C.C. (Note:- Ready Mix Concrete

(RMC) using PPC Cement to be used confirming to IS : 1489 (Part-I)

Cum.132.14 0

Total of Sub-Head - XII 136696.64

SUB-HEAD : XIII : CARRIAGE

Page 24

Sl. No. Deptt. Item

No.


1 Bricks 1000 nos 2811 370.41 1041222.512 Coarse aggregate m3 4829 583.34 2816948.863 Coarse sand m3 4455 216.67 965264.854 Local sand m3 5048 130.15 656997.2

5480433.42


Page 25

Sl. No. Deptt. Item

No.

DescriptionUnit Quantity Rate Amount (Rs)


9 CPWD 16.3.3+16.4 Providing and Laying soiling not exceeding 175mm of compacted thickens using 2.42 cubic meter of

stone aggregate 22.5 to 53m size range with necessary screening, blinding material, murrum and

selected earth for every 10 Sqm. Of area including sorting, spreading as shown in the drawing, watering

and consolidation with compactor etc. complete including supplying, spreading and consolidation of

screening and blinding material etc. complete. (Measurement for payment shall be on final compacted

thickness of the layers as mentioned in the drawings). No separate payment of the screening and

blinding material shall be taken for payment.

175m thick consolidated thickness in one layer (using 0.53 cum,. Of stone screening 13.2mm nominal

size and 0.18cum. Of blinding material murrum / selected earth for every 10 sqm.) Cum 2445 1319.05 3225077.25

Total of Sub-Head - I 3225077.25


32 CPWD 4.17 Making Plinth Protection 50 mm thick of cement concrete 1:3:6 (1: Cement : 3 Coarse Sand : 6 Graded

Stone aggregate 20mm nominal size) over 75 mm bed by dry brick ballast 40mm nominal size well

rammed and consolidated and grouted with fine sand including finishing the top smooth.

Note:- Used PPC Cement to be used conforming to IS: 1489 (Part-I) Sqm 1680 292.78 491870.4

0 0

33 CPWD 6.44 Brick edging 7 cm widw 11.4 cm deep to plint protection with bricks of class designation 75 including

grouting with cement mortor 1 : 4 ( 1: Cement : 4 Fine sand)


Meter 2810 21.37 60049.7


SCHEDULE OF QUANTITY ITEMS BASED ON SCHEDULE OF RATE (CPWD)

Sheet- 1B



Package III

Building Name:- Training Block - 1A, Training Block - 1B, Training Block - 1C, Training Block - 1D and Administrative Block,Building Name - Main Gate, Gas Godown, Pared Ground,UG Tank,

Police Station, ESS Building,Watch Tower 1 & 6, Reserve Office, Dir. Residence, Driver Accomn. & Garrage, Training Complex (T8) & Watch Tower -2

Page 1

Sl. No. Deptt. Item

No.


SUB HEAD : III : BRICK WORK

Total of Sub-Head - III 0 0


Total of Sub-Head - IV 0 0


64 CPWD 21.13 Providing and fixing 100 mm brass lock (best make of approved quality) for aluminium door including

necessary Grass cutting and making good etc. complete. Each 6 273.98 1643.88

Total of Sub-Head - V 1643.88


75 CPWD 10.25 Steel work welded in built up section / framed work including cutting, hoisting, fixing in position and

applying a primer coat of approved steel primer using structural steel etc as required. in stringers,

treads, landing etc of staircase including use of chequeral plate wherever required, all complete.

Kg. 842 64.37 54199.54

77 CPWD 12.50 Providing and fixing precoated galvanised iron profile sheets (Size, shape and pitch of corrugation as

approved by Engineer-in-charge) 0.50 mm + 5% total coated thickness (TCT) , Zinc coating 120 gsm as

per IS : 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester

top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid

scratches while transportation and should be supplied in single length upto 12 metre or as desired by

Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55

mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen

and G.I. limpet washers or with G.I. limpet washers filled with shitel lead complete upto any pitch in

horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including

cutting to size and shape wherever required.Sqm 250 579.44 144860

Total of Sub-Head - VI 199059.54

Page 2

Sl. No. Deptt. Item

No.



Total of Sub-Head - VII


Total of Sub-Head - VIII


112 CPWD 13.47.1 Finishing wall with Premium Acrylic smooth exterior paint with silicon additions of required shade.

New work (Two or more coats applied @ 1.43 Ltr / 10 sqm over and include base coat of water

proofing cement paint applied @ 2.20 kg/10sqm. Sqm. 24190 79.03 1911735.7

117 DSR 14.7 Melamine Polishing on wood work (one or more coat) Sqm. 26 59.37 1543.62

Total of Sub-Head - IX 1913279.32


9 CPWD 21.11.3 Providing and fixing stainless steel (SS 304 Grade) adjustable friction window stays of approved

quality with necessary stainless Steel Screws etc. to the side hung window as per diection of Engineer-

in-Charge-355x19mm. Each 127 325.52 41341.04

128 CPWD 21.8 Filling the gap in between aluminium frame and adjusment RCC/Brick/ Stone work by Providing

weather silicon sealed over backer rod of approved quality as per Architectural drawing and direction

of Engineer-in-Charge.

Upto 5mm depth and 5 mm width. Rmt 191 77.39 14781.49

Page 3

Sl. No. Deptt. Item

No.


129 CPWD 21.10 Providing and fixing Double glazed hermetically sealed glazed in Aluminium window, ventilator and

portation etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing

EPDM gasket, perforated aluminium spacers, desiccants, sealent (Both Primary and Secondary sealent)

etc as per specifications, drawings and direction of Engineer-in-Charge complete.

Sqm. 120 3693.63 443235.6

Total of Sub-Head - X 499358.13


Total of Sub-Head - XI


Total of Sub-Head - XII


Page 4

Sl. No. Deptt. Item

No.

Description Unit Quantity RateAmount


Total of Sub-Head - I


34 Extra for vacum dewatering method adopting "Tremix" system including finishing the electrical floater

etc all complete as directed by Engineer-in-charge.

Sqm 250 482.16 120540


SUB HEAD : III : BRICK WORK

Total of Sub-Head - III


Total of Sub-Head - IV


Total of Sub-Head - V




BILL OF QUANTITY FOR THE CONSTRUCTION OF POLICE ACACDEMY AT RAJGIR IN THE DISTRICT OF NALANDA

SCHEDULE OF QUANTITY ITEMS BASED ON NON-SCHEDULE ITEMS (NSR)

Sheet- 1C

Package - III

Building Name:- Training Block - 1A, Training Block - 1B, Training Block - 1C, Training Block - 1D and Administrative Block,Building Name - Main Gate, Gas Godown, Pared Ground,UG Tank,

Police Station, ESS Building,Watch Tower 1 & 6, Reserve Office, Dir. Residence, Driver Accomn. & Garrage, Training Complex (T8) & Watch Tower -2

Page 1

Sl. No. Deptt. Item

No.


73 AR Providing and fixing stainless steel hand rail 1.05m high in staircase made up of hand rail size 63 mm dia

16G SS pipe welded to SS Bluster 40mm dia curved on shaped welded with hand rail, Baluster shall be

grouted and fixed to RCC passes, waste slab 1050 mm from which six round pipe curved shape 12mm

dia will be running and fixed with accessories S.Il shoe in 100mm dia (SS 304 grade) complete.

Rm 123 5435.23 668533.29

78 Providing and erecting 2mm thick profiled metal sheets from approved manufacturer including securing

firmly by fastening with substrate to receive concrete (concrete to be paid separately) complete as per

manufacturer's specifications and as directed (Plan area to be measured, for payment) rates to include

two or more coats of synthetic enamel paint over a coat of zinc chromate steel primer on the exposed

sides of sheeting etc. all complete at all height and depth.Sqm. 109 2629.95 286664.55

Total of Sub-Head - VI 955197.84


97 AR Extra for laying floors in pattern with combination of granite / marble/virtified tile/ Kota Stone or else

etc. all complete as direction in Engineer-in-Charge. Sqm. 4091 219.16 896583.56

98 AR Providing and fixing 50 x 50 mm thick of glass mosaic tile in all the shape and size thickness as per

manufacturer specification at all depth and height of approved colour and shade over a bed of cement

mortar 1:2 (1 cement : 2 coarse sand) jointed with white cement slurry mixed with pigment to match the

sahde of glass mosaic tile or fixed with chemical adhesive as per recommendation by Manufacturer. All

work to be carried out as per drawing.

Note:- Used PPC Cement to be used conforming to IS: 1489 (Part-I) Sqm. 445 2542.29 1131319.05

Total of Sub-Head - VII 2027902.61


Total of Sub-Head - VIII


Page 2

Sl. No. Deptt. Item

No.


111 Providing and applying two or more of water base enamel paint to all internal area with base coat at all

height and depth etc all complete as per the direction Engineer-in-Charge. (water base enamal paint to

meet low VOC criteria as specified by GRIHA) Sqm. 46316 188.48 8729639.68

113 Providing and applying external paint of approved brand and manufacture equvalent to M/s SKK make

at all height & depth etc all complete as directed by Engineer-in-Charge (Basic coat of Rs. 25/- sft

included base coat) Sqm. 926 438.33 405893.58

118 AR 25 mm cement plaster in cement mortor 1:4 (! Cement : 4 coarse sand) including Providing Chicken

mess etc all complete.

Note:- Used PPC Cement to be used conforming to IS: 1489 (Part-I) Sqm. 397 284.91 113109.27

121 MR Providing and applying two or more coats of colour less silicon paint at all Locations Prepared and

applied as manufacture specifications Including appropriate Prime coat, preparation of surface etc. all

complete as directed by Engineer-in-Charge. Sqm. 435 241.08 104869.8

Total of Sub-Head - IX 9353512.33


Total of Sub-Head - X


131 AR Providing and laying Zentrifix Elastic Flexible membrane coating consisting of Zentrifix Elastic Powder

(1 kg/bag) and Emcefle-15 Liquid (0.5 kgs/bag) consumption for wet area shall be minimum 3 kgs/sqm

or 1.7 kgs/sqm/mm thickness complete as manufactured by M.C. Bauchmie (I) or approved equivalent as

per Architect's direction. Sqm 1857 543.52 1009316.64

132 AR Providing and laying polymer modified concrete screed 25mm thick using 8mm down aggregate in 1:1:3

(1 cement:1 aggregate:3 coarse sand admixed with special DICHATMENT DM-0.5% by weight of

cement, NAFUFIL SBR-5% by weight of cement) complete manufactured by M.C. Bauchemie or

approved equivalent as per Architect's direction. Note:- Used PPC Cement to be used conforming to

IS: 1489 (Part-I) Sqm 1705 499.69 851971.45

Page 3

Sl. No. Deptt. Item

No.


133 AR Providing and laying MECEKRETE or approved equivalent non shrink grout of size 30x30mm complete

R.M. 1853 78.90 146201.7

Note:

All additional openings made in and around RCC slab for sanitary pipes shall have to be sealed, grouted

and made water tight before commencing on the above works and above treatment shall be carried out

through a specialized approved agency.

134 AR Providing and applying 50mm thick polyurethane rigid foam sprayed in situ by automatically and

mechanised system with density of 40 Kgs./Cum. Using approved raw material conforming to

manufactured by BASF. ICI, BYER the international standard specification over terrace including

making groove 30mmx15mm in 3 m x 3m grids. (This work is to be carried out through approved

speciaslised sub-contractors experienced in polyurethane insulation work with the approval of the

consultant and shall be guaranteed fully effective for a period of ten years. Nothwithstanding this, the

responsibility of the effectiveness of the treatment shall be fully, entirely and unqualifiedly be that of the

main contractor for the work.) Sqm 395 657.49 259708.55i) 20 mm thick plaster (1:4) in 3 layers (details may be obtained from Consultant / Client on chemical

injection waterproofing). Sqm. 352 350.66 123432.32

ii) Grouting with 25mm dia G.I. nozzles (Details may be obtained from Consultant / Client on chemical


b) On wall surfaces (actual treated area to be measured for payment in the following manner).

i) 20mm thick cement mortar (1:4) with polymer based waterproofing compound plaster with checken wire

mesh (Details may be obtained from Consultant / Client on chemical injection waterproofing). Sqm. 48 311.21 14938.08

ii) Grouting with 25mm dia G.I. nozzles (Details may be obtained from Consultant / Client on chemical


Total of Sub-Head - XI 2496740.90


Total of Sub-Head - XII


Page 4

Sl.

No.

Deptt. Item No. Description Unit Q uantity Rate Amount (Rs.)

Sub-head : I : Point Wiring

1 Energy

Deptt, Govt

of Bihar, S/R-

09

1.3 Wiring for Light point / Fan point / Exhaust Fan point / Call Bell / 6 Amp light plug

point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface /

recessed PVC conduit, with modular switch, modular plate, suitable size GI box and

earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core

cable etc. as required.

1.3.1 a) Group - A Point 990 345.24 341787.6

1.3.2 b) Group - B Point 1260 401.37 505726.2

1.3.3 c) Group - C Point 1020 479.60 489192

2 Energy

Deptt, Govt

of Bihar, S/R-

09

1.3-

(1.24.1+1.27.1)Wiring for Light point / Fan point / Exhaust Fan point / Call Bell / 6 Amp light plug

point with 2x1.5 sq.mm PVC insulated stranded copper conductor cable alongwith 1

No. 1.5 sq.mm PVC insulated copper conductor cable for earthing in surface/recessed

PVC conduit as required. (Point shall be controlled / looped from existing point).

Point 2700 187.08 505116

3 Energy

Deptt, Govt

of Bihar, S/R-

09

1.4 Wiring for twin control Light point with 1.5 sq.mm FR PVC insulated copper

conductor single core cable in surface / recessed PVC conduit, 2 way modular switch,

modular plate, suitable size GI box and earthing the point with 1.5 sq.mm FR PVC

insulated copper conductor single core cable etc. as required.Point 175 517.86 90625.5

4 Energy

Deptt, Govt

of Bihar, S/R-

09

1.5 Wiring for light / power plug point with 2 x 4 sq.mm FR PVC insulated copper

conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 4 sq.mm

FR PVC insulated copper conductor single core cable for loop earthing as required.

Metre 25000 144.56 3614000

5 Energy

Deptt, Govt

of Bihar, S/R-

09

1.6 Wiring for light / power plug point with 4 x 4 sq.mm FR PVC insulated copper

conductor single core cable in surface / recessed PVC conduit alongwith 2 Nos. 4

sq.mm FR PVC insulated copper conductor single core cable for loop earthing as

required. Metre 13480 254.25 3427290

6 Energy

Deptt, Govt

of Bihar, S/R-

09

1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on

surface or in recess, including providing and fixing 3 pin 5 / 6 amps modular socket

outlet and 5 / 6 amps modular switch, connection, painting etc.as required. (For light

plugs to be used in non residential buildings.) Each 1770 201.53 356708.1

7 Energy

Deptt, Govt

of Bihar, S/R-

09

1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on

surface or in recess ,including providing and fixing 6 pin 20 / 16 amps modular socket

outlet and 15 / 16 amps modular switch, connection, painting etc.as required.

Each 800 266.16 212928

8 Energy

Deptt, Govt

of Bihar, S/R-

09

1.27.4 + 1.24.3 +

1.24.4Supplying and fixing suitable size GI box with modular plate and cover in front on

surface or in recess, including providing and fixing 3 nos 3 pin 5 / 6 amps modular

socket outlet and 1 no 15 / 16 amps modular switch,connection, painting etc.as

required. Each 580 517.86 300358.8

11 Energy

Deptt, Govt

of Bihar, S/R-

09

( 2.19 - 2.12)

+2.17.1)Supplying and fixing 20 Amps, 240 Volts, SPN industerial type, Socket outlet, with 2

pole and earth, metal enclosed plug top along with 20 amps, 2Pole, RCCB in sheet

steel enclosure, on surface or in recess with chained metalcover for the socket out let

and complete with connections, testing andcommissioning etc. as required.

a) 20A, 3 pin socket outlet controlled by 20A 2P RCCB. Each 75 1880.12 141009

12 Energy

Deptt, Govt

of Bihar, S/R-

09

2.62 Supplying and fixing 20 Amps, 240 Volts, SPN industerial type, Socket outlet, with 2

pole and earth, metal enclosed plug top along with 20 amps, C series, MCB in sheet

steel enclosure, on surface or in recess with chained metalcover for the socket out let

and complete with connections, testing andcommissioning etc. as required. Each 43 730.45 31409.35

13 Energy

Deptt, Govt

of Bihar, S/R-

09

2.19 Supplying and fixing of following sizes of PVC conduit alongwith the accessories in

surface / recess including painting in case of surface conduit or cutting and making

good the same in case of recessed conduit as required as per specification.

1.21.1 a) 20mm dia 16 SWG PVC conduit. Metre 9400 35.71 335674

1.21.2 b) 25mm dia 16 SWG PVC conduit. Metre 21800 44.22 963996

1.21.3 c) 32 mm dia 16 SWG PVC conduit Metre 1200 62.08 74496

1.21.4 d) 38 mm dia 16 SWG PVC conduit Metre 0 83.33 0

1.21.5 e) 50 mm dia 16 SWG PVC conduit Metre 1000 109.70 109700

14 Energy

Deptt, Govt

of Bihar, S/R-

09

1.7 Supplying and drawing following sizes of FR PVC insulated copper conductor single

core cable in the existing surface / recessed PVC conduit as required.

1.7.4 a) 2 x 6.0 sq.mm + 1 x 6.0 sq.mm Metre 10200 207.49 2116398

1.7.11 b) 4 x 6.0 sq.mm + 1 x 6.0 sq.mm Metre 6180 329.09 2033776.2

15 Energy

Deptt, Govt

of Bihar, S/R-

09

1.12.3 Wiring for group light point controlled from existing MCB in DB with 2x4 sq.mm

PVC insulated stranded copper conductor single core cable in surface/recessed PVC

conduit alongwith 1 No. 4 sq.mm PVC copper conductor cable for loop earthing as

required (OUTDOOR RECESSED LIGHT). Metre 734 56.12 41192.08

16 Energy

Deptt, Govt

of Bihar, S/R-

09

1.7 Wiring for circuit / submain wiring along with earth wire with the following sizes of FR

PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as

required.

1.7.1 2 X 1.5 sq.mm +1 X 1.5 sq.mm Earth wire Metre 70 82.48 5773.6

1.7.2 2 X 2.5 sq.mm +1 X 2.5 sq.mm Earth wire Metre 16000 106.29 1700640

1.7.5 2 x 10 sq.mm + 1 x 10 sq.mm earth wire Metre 4000 312.08 1248320




17 Energy

Deptt, Govt

of Bihar, S/R-

09

Providing, fixing, connecting, testing and commisssioning of zinc passivated box with

moulded plate in recess or on surface moulded type with following including all

necessary materials etc. as required.

PWD 1.24.1 and 1.27.1 a) 6/10 amp one way switch with 1 or 2 module plate.Each 21 158.17 3321.57

18 Energy

Deptt, Govt

of Bihar, S/R-

09

Providing, fixing, connecting, testing and commisssioning of zinc passivated box with

moulded plate in recess or on surface moulded type with following including all

necessary materials etc. as required.

1.24.3 +1.27.1 a) 16/20 amp one way switch with 1 or 2 module plate Each 22 176.87 3891.14

TO TAL (RS.)

Sub-head : II : Fans & Light Fixtures

TO TAL (RS.)

Sub-Head : III - Distribution Boards

TO TAL (RS.)

Sub-Head : IV - MV Panel Boards / O ut-door Feeder Pillars

Total (in Rs.)

Sub-Head : V L.T. Cables and Cable Trays

1 MR+Energy

Deptt, Govt

of Bihar, S/R-

09

Cables+Lay ing

of CablesSupplying, laying, testing & commissioning of following sizes, XLPE insulated,

armoured, alluminium cable 1100V grade on surface or existing cable tray and to be

fixed with M.S. clamps of suitable size as directed by the E/I complete in all respects

or with MS support including painting supply and providing cable identification

markers etc. The armouring of the cable shall be properly connected with the earth

conductor by clamps etc. complete as required.

a) 3.5 x 70 sq.mm Metre 8 403.72 3229.76

b) 3.5 x 50sq.mm Metre 16 310.23 4963.68

c) 3.5 x 35sq.mm Metre 16 310.23 4963.68

d) 4 x 25sq.mm Metre 280 310.23 86864.4

e) 3 x 25sq.mm Metre 40 310.23 12409.2

f) 3 x 16sq.mm Metre 24 310.23 7445.52

g) 3 x 10sq.mm Metre 24 160.65 3855.6

h) 4 x 6 sq.mm Metre 40 128.34 5133.6

i) 3 x 6sq.mm Metre 136 128.34 17454.24

j) 3 x 4sq.mm Metre 900 128.34 115506

k) 3 x 2.5sq.mm Metre 1300 128.34 166842

2 Energy

Deptt, Govt

of Bihar, S/R-

09

Supplying and making cable end termination complete with brass compression gland,

crimping thimbles and insulating and PVC sheathed aluminium conductor cable of1.1

KV grade of the under noted sizes as required.

4.2.20 a) 3.5 x 70 sq.mm Set 3 372.28 1116.84

4.2.19 b) 3.5 x 50sq.mm Set 3 346.78 1040.34

4.2.18 c) 3.5 x 35sq.mm Set 3 303.49 910.47

4.2.30 d) 4 x 25sq.mm Set 22 249.89 5497.58

4.2.6 e) 3 x 25sq.mm Set 10 249.89 2498.9

4.2.5 f) 3 x 16sq.mm Set 6 249.89 1499.34

4.2.5 g) 3 x 10sq.mm Set 4 249.89 999.56

4.2.5 h) 4 x 6 sq.mm Set 3 249.89 749.67

4.2.5 i) 3 x 6sq.mm Set 16 249.89 3998.24

4.2.5 j) 3 x 4sq.mm Set 24 249.89 5997.36

4.2.5 k) 3 x 2.5sq.mm Set 22 249.89 5497.58

Control Cables & Accessories

Total (in Rs.)

Sub-head : VI Earthing & Lightning Conductor System

1 Energy

Deptt, Govt

of Bihar, S/R-

09

3.5 Earthing with G.I. Earth plate 600 mm x 600 mm x 6 mm thick including accessories

and providing masonary enclosure with cover plate having locking arrangement and

watering pipe etc.(but without charcoal or coke and salt) complete as required. Set 32 1916.63 61332.16

2 Energy

Deptt, Govt

of Bihar, S/R-

09

3.6 Earthing with copper Earth plate 600 mm x 600 mm x 3.15mm thick including

accessories and providing masonary enclosure with cover plate having locking

arrangement and watering pipe etc. (but without charcoal or coke and salt) complete

as required. Set 28 4741.03 132748.84

3 Energy

Deptt, Govt

of Bihar, S/R-

09

3.7 Extra for using salt and coke for G.I or copper plate earth electrode as required.

Set 26 1128.73 29346.98

5 Energy

Deptt, Govt

of Bihar, S/R-

09

Providing and fixing following G.I./Copper strip from earth electrode as required.

3.17 a) 25x 5mm copper strip Metre 175 557.83 97620.25

3.12 b) 25x6 mm GI strip Metre 660 56.97 37600.2

3.12x2 c) 50x6 mm GI strip Metre 62 113.95 7064.9

6 Energy

Deptt, Govt

of Bihar, S/R-

09

4.2 Providing and fixing of lightning conductor finiel, made of 25mm dia 300mm long GI

tube, having single prong at top with 85mm dia 6mm thick GI base plate including

holes etc. complete as required. Each 18 234.70 4224.6

7 Energy

Deptt, Govt

of Bihar, S/R-

09

4.7 Providing and fixing GI tape 20mm x 3mm thick on parapet or surface of wall for

lightning conductor as required. (for horizontal run).

Metre 500 29.76 14880

8 Energy

Deptt, Govt

of Bihar, S/R-

09

4.8 Providing and fixing GI tape 20mm x 3mm thick on parapet or surface of wall for

lightning conductor as required (for vertical run).

Metre 180 38.27 6888.6

9 Energy

Deptt, Govt

of Bihar, S/R-

09

4.1 Providing and fixing testing joint, made of 20mm x 3mm thick GI strip, 125mm long

with 4 nos. of GI bolts, nuts check nuts and spring washers etc. complete as required.

Each 5 38.27 191.35

10 Energy

Deptt, Govt

of Bihar, S/R-

09

4.12 Providing and laying GI tape, 32mm x 6mm thick, on surface/recess for connection

complete as required.

Metre 50 65.46 3273

11 Energy

Deptt, Govt

of Bihar, S/R-

09

3.2 Earthing with GI earth pipe 4.5M long, 40mm dia including accessories, and providing

masonary enclosure with cover plate having locking arrangement etc. (but without

charcoal or coke and salt) complete as required. Set 51 1623.40 82793.4

12 Energy

Deptt, Govt

of Bihar, S/R-

09

Extra for using salt and charcoal for pipe earth electrode as required.

Set 62 948.54 58809.48

Total (in Rs.)

Sub-head : XV - Lifts

Grand Total (in Rs). 25871354.5

SCHEDULE O F Q UANTITY ITEMS BASED O N SCHEDULE O F RATE BUILDING (SR)

Sheet- 1A

Sheet- A1

Package III

ENGINEERING PRO JECTS (India) LTD


Building Name:- Training Block - 1A, Training Block - 1B, Training Block - 1C, Training Block - 1D and Administrative Block,Building Name - Main Gate, Gas

Godown, Pared Ground,UG Tank, Police Station, ESS Building,Watch Tower 1 & 6, Reserve Office, Dir. Residence, Driver Accomn. & Garrage, Training Complex

(T8) & Watch Tower -2

Sl.

No.

Deptt. Item No. Description Unit Quantity Rate Amount (Rs)


TOTAL (RS.)


TOTAL (RS.)


TOTAL (RS.)

Sub-Head : IV - MV Panel Boards / Out-door Feeder Pillars

Total (in Rs.)


1 Supplying, laying, testing & commissioning of following sizes of XLPE insulated armoured copper

control cable of 1100 V grade on existing cable trench, surface of wall with M.S. clamps / cable

tray complete as required.

a)MR+CPWD Cables+Laying of

Cables 4 x 16 sq.mm Meter 761.37 0

b) 4 x 10 sq.mm Meter 535.20 0

c) 4 x 6 sq.mm Meter 369.53 0

d) 3 x 6 sq.mm Meter 300 299.81 89943

e) 3 x 10 sq.mm Meter 40 443.22 17728.8

f) 3C x 1.5 sq.mm Meter 250 145.96 36490

g) 5C x 1.5 sq.mm Meter 190 193.31 36728.9

2 CPWD-2007-

ExternalSupplying and fixing of CRCA sheet steel, perforated cable tray duly stove enamel painted of

approved shade in position including fixing in trench/along wall or ceiling complete with M.S.

rod/flat hangers directly grouted in walls/ceiling or welded with steel structure etc. with necessary

materials etc. as required.

3.1.1 100 mm wide x 50mm x 1.6mm thick R.M. 180 366.88 66038.4

3.1.2 150 mm wide x 50mm x 1.6mm thick R.M. 150 440.55 66082.5

3.1.4 300 mm wide x 50mm x 1.6mm thick R.M. 200 689.05 137810

Total (in Rs.)


3 CPWD 18.12.07.4/210/Ci

vil/202Providing and fixing following 'B' Class G.I. Pipe from earth electrode as required.

a) 40mm dia. Metre 100 273.51 27351

2 CPWD 3.1 Providing and fixing 8 SWG G.I. wire on surface or in recess for loop earthing alongwith the

existing surface / recessed conduit/submain wiring/cable as required. Mtr 52 21.04 1094.08

TOTAL (RS.)

Total (in Rs.)

Total (in Rs.)

Sub-head : XII - Fire Alarm & Public Address System

Total (in Rs.)


Total (in Rs). 479266.68




Sub Head - IX : MATV System


Sheet- 1B

Sheet- 1B

Sub Head - VIII : Telephone System

Package III

Building Name:- Training Block - 1A, Training Block - 1B, Training Block - 1C, Training Block - 1D and Administrative Block,Building Name - Main Gate, Gas Godown, Pared

Ground,UG Tank, Police Station, ESS Building,Watch Tower 1 & 6, Reserve Office, Dir. Residence, Driver Accomn. & Garrage, Training Complex (T8) & Watch Tower -2

Sl.

No.

Deptt. Item No. Description Unit Quantity Rate Amount

(Rs.)


1 M.R. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or

in recess including providing & fixing of moulded plate type 6 pin 25 Amps socket with plug

top and single phase motor starters of the minimum features of current setting over load

protection etc as required. (For A.C points ). Each 220 1775.22 390548.4

2 M.R. Supplying and fixing 32 Amps, 415Volts, TPN industerial type, Socket outlet with 4 pole

and earth, metal enclosed plug top along with 30 Amps 'C' Series, TP MCB in sheet steel

enclosure, on surface or in recess with chained metalcover for the socket out let and complete

with connections, testing and commissioning etc. as required. Each 55 1608.65 88475.75

3 M.R. Providing, fixing, connecting, testing and commisssioning of Aviation Light including

drawing of control cable complete as required. Each 5308.12

TOTAL (RS.)


1 AOR1 Supply, Installation, testing & commissioning of box type, fluorescent luminaire, powder

coated complete with Electronics ballast, lockable holders and lamp etc. complete as required.

Similar to Philips Cat. No. TMS 122 / 128 HF Each 1350 1476.28 1992978


coated, complete with Electronics ballast, lockable holders and lamp etc. complete as

required.Similar to Philips Cat. No. TMS 122 / 228 HF Each 41 1875.15 76881.15


coated, complete with dimmable ballast, lockable holders and lamp etc. complete as




Sub Head: A Internal Electrical Works


Sheet- 1C

Sheet- 1C

Package III




Sl.

No.


(Rs.)


coated, complete with electronic ballast, lockable holders and lamp etc. complete as


5 AOR5 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire

powder coated complete with electronic ballast, lockable holders, reflector and T-5 lamps etc.

complete as required similar to PHILIPS cat no TCS 150/128 Each 32 2849.11 91171.52


powder coated complete with dimmable ballast, lockable holders, reflector and T-5 lamps etc.

complete as required similar to PHILIPS cat no TCS 150/128 Each 10 3112.11 31121.1


powder coated complete with electronic ballast, lockable holders, reflectors and T-5 lamps

etc. complete as required similar to PHILIPS cat no TCS 150/228 Each 150 3068.28 460242


powder coated complete with Dimmable ballast, lockable holders, reflectors and T-5 lamps

etc. complete as required similar to PHILIPS cat no TCS 150/228 Each 168 3375.10 567016.8


powder coated complete with electronic ballast, lockable holders, reflectors and T-5 lamps



powder coated complete with Dimmable ballast, lockable holders, reflectors and T-5 lamps


11 AOR11 Supply, installation, testing and commissioning of 2x18W CFL recessed type light luminaires

complete with electronic ballasts including lamps and all accessories complete with lockable

holders etc. complete as required Similar to Philips Cat No. FBH 145/218 HF.

Each 20 2509.85 50197

12 AOR12 Supply, installation, testing and commissioning of 2x18W CFL recessed type light luminaires

complete with dimmable ballasts including lamps and all accessories complete with lockable

holders etc. complete as required Similar to Philips Cat No. FBH 145/218 HF.

Each 11 5139.80 56537.8

Sl.

No.


(Rs.)

13 AOR13 Supply, Installation, testing & commissioning of recessed type down lighter with 2x42W PL-

T lamp, luminaire with electronic ballast and all accessories of approved colour complete as

required similar to PHILIPS cat no FBH 225/226 HF. Each 28 3847.62 107733.36

14 AOR14 Supply, Installation, testing & commissioning of recessed type down lighter with 2x42W PL-

T lamp, luminaire with electronic ballast and all accessories of approved colour complete as

required similar to PHILIPS cat no FBH 225/242 HF. Each 100 4032.59 403259

15 AOR15 Supply, Installation, testing & commissioning of recess type mirror optics light fixture

including 4x14W, T-5 Lamp with electronic ballast complete as required similar to Philips

Cat No. TBS 869 / 414 D8 HF Each 60 4242.99 254579.4

16 AOR16 Supply, Installation, testing & commissioning of surface type mirror optics light fixture

inclduing 4x14W, T-5 Lamp with Dimmable ballast complete as required similar to PHILIPS

cat no TBS 814 / 414 D8 HF Each 30 4505.98 135179.4

17 AOR17 Supply, Installation, testing & commissioning of surface type mirror optics light fixture

inclduing 4x14W, T-5 Lamp with electronic ballast complete as required similar to PHILIPS

cat no TPS 814 / 414 D8 HF Each 18 9199.57 165592.26

18 AOR18 Supply, erection, testing & commisioning of surface type light luminaire mirror light fixture

for including 2x11W CFL with electronics ballast complete as required similar to PHILIPS

cat no FCS 518/211. Each 170 1057.24 179730.8


for including 2x18W CFL with electronics ballast complete as required similar to PHILIPS

cat no FCS 518/218.Each 702 1278.16 897268.32


for including 1x14W, T-5 with electronic ballast complete as required similar to PHILIPS

cat no TCH 207 HFEach 258 1314.98 339264.84

21 AOR21 Supply, erection, testing & commisioning of surface type light luminaire for mirror light

including 1x14W T-5 lamp with electronic ballast complete as required similar to PHILIPS

cat no TWG 207 (Adrino) Each 238 812.65 193410.7

22 AOR22 Supply, erection, testing & commisioning of surface type light luminaire for mirror light

including 1x28W, T-5 lamp with electronic ballast complete as required similar to PHILIPS

cat no TWG 207 (Adrino) Each 125 1022.17 127771.25

Sl.

No.


(Rs.)

23 AOR23 Supply, Installation, testing & commissioning of bulk head light fitting complete with glass

cover, wire guard, 11 watt compact fluorescent lamp, pressure impregnated copper ballast etc.

complete as required similar to Cat No. Philips FXC 101 Each 175 827.56 144823

24 AOR24 Supply, erection, testing & commisioning of surface type light luminaire with 20W Ternado

lamp, electronic ballast complete as required similar to PHILIPS Cat No ECB 300

Each 225 1753.30 394492.5

25 AOR25 Supply, erection, testing & commisioning of surface type light luminaire with 70W CDM-TD

lamp, electronic ballast complete as required similar to PHILIPS Cat No MINI 300 Each 20 14464.73 289294.6

26 AOR26 Supply, erection, testing & commisioning of surface type light luminaire with 150W CDM-

TD lamp, electronic ballast complete as required similar to PHILIPS Cat No DBP 300 Each 30 17533.00 525990

27 AOR27 Supply, erection, testing & commisioning of surface type light luminaire with 23Watt lamp,

electronic ballast complete as required similar to PHILIPS Cat No FCG 315 Each 12 1748.92 20987.04

28 AOR28 Supply, erection, testing & commisioning of surface type wall bracket light luminaire with

24Watt ternandolamp, electronic ballast complete as required similar to PHILIPS Cat No

EWC 300 (white) Each 950 1095.81 1041019.5

29 AOR29 Supply, erection, testing & commisioning of wall mounted holder with 5 Watt CFL lamp

complete as required of approved make. Each 206 219.16 45146.96

30 AOR30 Supply, installation, testing and commissioning of Flame Proof light fixture with 2X40W

lamp complete as required simillar to Sudhir Cat no. FF/OA//1271. Each 36 5259.90 189356.4

31 AOR31 Supply, installation, testing and commissioning of Flame proof exhuast fan 12", 1440 RPM,

0.2 HP motor complete as required. Each 15 7451.53 111772.95

32 AOR32 Supply, Installation, testing & commissioning of recessed type side wall fitiing (New Brick

light) complete with 2 x 9W PL lamp, copper ballast, lamps including connection complete as

required including reccessing the same with zinc passivated Aluminium box similar to Wipro

Cat No.PSP 42126 . Each 10 1902.33 19023.3

33 AOR33 Supplying, installation, testing and commissioning of emergency exit light with lamp with

chargeable maintenance free batteries, 2 pin socket. The luminaire shall be complete with

initial charge of battery with one hour backup etc. complete as required. Similar to Legrand

Model No. 61730+660874. Each 66 4966.22 327770.52

Sl.

No.


(Rs.)

34 AOR34 Supply, Installation, testing & commissioning of UP & DOWN Lighter, wall mounted

complete with 1X70 watt lamp, pressure impregnated copper ballast etc. complete as required

similar to PHILIPS Cat No CRESSIDA DCP 72 / CDM - T. Each 11 10990.56 120896.16

35 AOR35 Supply, Installation, testing & commissioning of following sizes 1400 rpm sweep ceiling fan

complete with double ball bearings, blades, down rod, shackle insulator, canopy etc. complete

as required.

a) 1200mm Each 900 1665.64 1499076

b) 1400mm Each 9 1753.30 15779.7

36 AOR36 Supply, Installation, testing & commissioning of following sizes of exhaust fan complete

with louver, bird screen & with 3 core flexible wire as required.

a) 305 mm 900 RPM Each 382 3944.93 1506963.3

b) 381 mm 900 RPM Each 13 4821.58 62680.54

37 AOR37 Supply, Installation, testing & commissioning of oscillating type 400mm sweep bracket fan

including mounting arrangement and push button speed regulator etc. complete as required.

Each 13 3944.93 51284.09

38 AOR38 Supply, installation, testing and commissioning of wall mounted electric hand drier

consisting of strip heater double centrifugal high speed blower rated for continuous use in

summer and winter including 3 core flexible wire etc. complete as required. Similar to Kopal

Cat. No.R-20. Each 57 3068.28 174891.96

39 AOR39 Supply and fixing circular/ hexagonal M.S. sheet ceiling fan box with clamp of internal dia

140mm, 73 mm height, 3mm thick rim top lid of 1.5mm thick M.S sheet lidss shall be

screwed into M.S. box by means of 3mm round headed screws, clamps shall be made of 12

mm dia M.S bar bent to be shape as per standard drawing with over all length as 80 cmEach 1120 135.88 152185.6

40 AOR40 Supply and fixing of step type electronic fan regulator on existing modular plate switch

box including connection complete as required. Each 382 525.99 200928.18

41 AOR41 Supply, installation, testing and commissioning of ceiling mount movement sensor

(standalone) for application in toilet etc complete as required, make simillar to philips or

equivalent. Each 50 6487.21 324360.5

Sl.

No.


(Rs.)

42 AOR42 Supply, installation, testing and commissioning of ceiling mount dimmable sensor and

controller for application in office, waiting areas etc including complete control wiring as

required, make simillar to philips Actilume or equivalent.Each

43 AOR43 Supply, installation, testing and commissioning of ceiling mount fixture coupler for

application in office, waiting areas etc including complete control wiring as required, make

simillar to philips Actilume or equivalent. Each

44 AOR44 Supply, installation, testing and commissioning of controller for application in office, waiting

areas etc including complete control wiring as required, make simillar to philips Actilume or

equivalent. Each

45 AOR45 Supply, installation, testing and commissioning of light fixture with 70 watt CDM-TD Lamp

fixed to 40 mm dia 1 mtr long G.I. pipe fabicated as required and mounted on wall with

suitable size clamp complete as required, make simillar to PHILIPS CAT NO. SGP 301

Each 4 6574.88 26299.52

46 AOR46 Supply, installation, testing and commissioning of light fixture with 70 watt CDM-TD Lamp

fixed to 3 M long, 75mm dia 'B' class G.I. pipe with 300x300x6mm base plate including

supplying and erection of cement concrete foundation 1:2:4 ( one cement:, 2 coarse sand: 4

stone aggregate 20mm nominal gauge with pedestal of approved design/drawing. The

dimension of foundation shall be 450x450x600mm laid over 100mm thick 600x600mm bed

of 1:4:8 concrete with 50mm reducer at top complete as required. make simillar to PHILIPS

CAT NO. SGP 301. Each 14 9204.83 128867.62

47 AOR47 Supply and erection of Highbay Luminaire closed version with anodized aluminium reflector

comprises of housing, Reflector & Glass Cover light fitting complete with 400watt HPI (plus)

BU lamp, pressure impregnated copper ballast etc.complete as required similar to PHILIPS

Cat No HPK - 225/HPI 400 NB with glass. Each 15 8328.18 124922.7

48 AOR48 Supply and erection of battery operated emergency light luminaire with 11 watt CFL

including providing and fixing maintenance free batteries and battery charger mounted on

ceiling/wall complete as required and approved by client. Each 22 2629.95 57858.9

49 AOR49 Supply, installation, testing and commissioning of ceiling suspended Table Tenis light

complete as required. Each 2 26299.50 52599

Sl.

No.


(Rs.)

50 AOR50 Supply, installation, testing and commissioning of ceiling suspended Billiard light complete

as required. Each 2 30682.75 61365.5

51 AOR51 Supply, installation, testing and commissioning of ceiling suspended Chendelier Light fixture

complete as required and approved by client. Each 10 8328.18 83281.8

52 AOR52 Supply, installation, testing and commissioning of Aviation light simillar to Philips cat no

XGP 400 1 X LED - K2 / RD 240V Each 25 6574.88 164372

TOTAL (RS.)


1 Supplying, installation, testing and commissioning of surface/recess mounting vertical type

three pole and neutral, prewired, sheet steel, MCB distribution board 415 volt, dust protected

and powder painted, inclusive of 200 amps tinned copper busbar, common netrul link, earth

bar, din bar for mounting MCB detachable gland /knock out plate, and with built in loose

wire box, and superior make terminal connectiors for all adequate size of FR PVC insulated

copper conductor upto the terminal of following way with double door as required

A. 8 WAY SP&N DB

i) 1 No. 40 Amps DP MCB+RCCB 40 6136.55 245462

ii) 4 Nos. 6-20 Amp SP MCB as outgoing

B. 12 WAY SP&N DB 31 7889.85 244585.35

i) 1 No. 40 Amps DP MCB+RCCB

ii) 8 Nos. 6-20 Amp SP MCB as outgoing

C. 4 WAY TP&N DB 34 12273.10 417285.4

i) 1 No. 40 Amps 4P MCB+RCCB

ii) 12 Nos. 6-20 Amp SP / 3 Nos TP MCB as outgoing

D. 8 WAY TP&N D.B 62 15779.70 978341.4

i) 1 No. 32 Amps 4 Pole MCB +RCCB

ii) 24 Nos. 6-32 Amps SP/ 6 Nos TP MCBs as outgoing

E. 12 WAY TP&N D.B. 38 20162.95 766192.1

i) 1 No. 63 Amps 4P MCB +RCCB

ii) 36 Nos. 6-20 AMPS SP/ 9 Nos TP MCB outgoing

Sl.

No.


(Rs.)

TOTAL (RS.)

Sub-Head : IV - MV Panel Boards / Out-door Feeder Pillars

General Notes:

1 ACB:

LSIG (Microprocessor Based) releases shall be used for incoming feeders & LSI releases for

outgoing breakers.

2 MCCB:

MCCBs shall be used with Microprocessor Based releases

3 Breaking capacity mentioned is Ics value.

4 This BOQ to be read in conjunction with technical specifications and Single Line Diagram

(attached for reference). If any discrepancy occurs that should be brought to the notice of

Client/Consultant before quoting the price otherwise stringent condition will be deemed to

have been considered.

5 All ACBs to be provided with ON/OFF/Trip lamps, 3 NO + 3NC Auxiliary contacts other

than used in control circuit.

6 All Transformer and DG incoming ACBs shall be provided with Microprocessor based

releases & ON/OFF/Trip / Spring charged/ready to close indicating lamps.

7 All MCCBs shall be provided with rotary operating handle and ON/OFF lamps.

8 All meters shall be digital type (unless otherwise specified)

9 All MCBs shall be motor duty type.

10 All current/voltage transformer shall be cast resin type.

11 All indicating lamps shall be LED type.

12 Current density for Al. bus bars shall not be more than 0.8A/Sqmm. Rating of Bus bar is after

considering all derating factors. (Bus bar sizing calculation to be submitted for approval.)

Sl.

No.


(Rs.)

13 All internal control wiring shall be heat resistant type.

14 All incoming breakers in Main LT panel shall be electrically interlocked, as per inter locking

scheme given in SLD.

15 All TP feeders shall be provided with Isolable neutral link.

16 Bus bar chamber & cable entry both shall be provided at top only.

17 Bus couplers shall be provided with ON & OFF indicating lights but without releases.

18 All feeders shall be provided with door interlocked with door defeat, pad lock facility.

19 Live parts shall not be accessible after opening the door, Transparent acrylic sheet to be

provided to cover the same.

20 Spare contacts of ACBs / MCCBs / Relay / Contactor shall be wired upto terminal block.

21 20% spare control terminal to be provided.

22 All MCCBs shall be provided with Thermal Magnetic based over load & Short Circuit

releases. Incoming MCCB shall be provided with E/F releases also.

23 All incoming/outgoing cables shall be terminated on links/terminals.

24 All Switchgear used in Starter shall be type-2 coordinated. Contactor rating shall be selected

as per the heavy duty KVAR rating of the capacitor bank from capacitor duty contactor

range. Vendor to furnish the type-2 coordination chart and capacitor duty contactor selection

chart.

25 Control supply in main LT Panel will be 24V DC & 230V Ac/24V DC control unit will be

provided in the panel as required.

26 All energy meters supplied shall be Post Paid Dual type single/three phase as required

simillar to Secuer make.

1 MV Panel Boards

Sl.

No.


(Rs.)

MR Supply, erection, testing and commissioning of LT Panels fabricated out of 2mm thick CRCA

sheet steel, dust and vermin proof with reinforcement of suitable size angle iron, fully

compartmentalized cubical type (folded joints construction), floor mounted, totally enclosed,

extendable on both sides, switch board suitable for use on 415V, 3 phase 4 wire, 50 c/s

system having 50 KA fault capacity, housed with incoming and outgoing aluminum bus bars,

interconnection, interlocking between feeders etc. with indicating lamps, push buttons,

necessary accessories, all feeders protection & meters compatible to PC/PLC/BMS with

communication port RS-485 etc. including supply and fixing of base channels of

100x50x6mm as required and with following incoming and outgoing switchgears with

protection and metering etc. as per specification and schematic diagram and provision to be

made for interfacing with BMS etc. complete as required.

1.1 MR Admin Block

a) Incomer

1 Nos.800A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction

meter with communication port, Set of CTs of 800/5A Class-1, 15 VA.

b) Bus bars

Set of 1000 A electrolytic aluminum bus bars.

c) Out goings

i) 1 Nos.100A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of

CTs of 100/5A Class-1, 15 VA.

ii) 2 Nos.250A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of


iii) 2 Nos.400A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of


iv) 5 Nos 40A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 40/5A Class-1, 15

VA

v) 6 Nos 63A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 63/5A Class-1, 15

VA

vi) 5 Nos Power Contactor with Digital Astronomical timer switch

1.2 MR Training Center - 1B

a) Incomer

1 Nos. 630A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction


b) Bus bars


Sl.

No.


(Rs.)

c) Out goings



ii) 5 Nos 40A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 40/5A Class-1, 15

VA

iii) 5 Nos 63A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 63/5A Class-1, 15

VA

iv) 5 Nos Power Contactor with Digital Astronomical timer switch Set 1 464600.00 464600

1.3 MR Training Center - 1A

a) Incomer

1 Nos. 630A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction


b) Bus bars


c) Out goings




VA


VA

iv) 5 Nos Power Contactor with Digital Astronomical timer switch Set 1.00 464600.00 464600

1.4 MR Training Center - 1C

a) Incomer



b) Bus bars


c) Out goings




VA

Sl.

No.


(Rs.)


VA


1.5 MR Training Center - 1D

a) Incomer



b) Bus bars


c) Out goings




VA


VA


1.17 MR Reserve Office



b) Bus bars


c) Out goings

i) 3 Nos 40A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 40/5A Class-1, 15

VA


VA

iii) 3 Nos Power Contactor with Digital Astronomical timer switch Set 1.00 193200.00 193200.00

1.26 MR Training Complex - T8



b) Bus bars

Sl.

No.


(Rs.)


c) Out goings


VA


VA

iii) 3 Nos Power Contactor with Digital Astronomical timer switch Set 1.00 271400.00 271400.00

1.20 MR Police Station

1 No.63A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3

phase Dual energy meter, Set of CTs of 63/5A Class-1, 15 VA.

b) Bus bars


c) Out goings


VA


VA Set 1.00 153640.00 153640.00

1.6 MR Director Residence

a) Incomer

1 No.200A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3

phase Dual energy meter, Set of CTs of 200/5A Class-1, 15 VA.

b) Bus bars


c) Out goings

3 Nos 40A TPN MCB (10kA) Set 1.00 96600.00 96600.00

Total (in Rs.)


Total (in Rs.)


Sl.

No.


(Rs.)

M.R Providing and laying GI strip 32x6mm in 50mm GI pipe B class including cost of GI pipe

complete as required. Metre 11 525.99 5785.89

TOTAL (RS.)

Sub Head - VIII : Telephone System

1 M.R. Supplying, drawing of 0.61 sq.mm (3 pair) FR PVC insulated copper conductor,

unarmoured telephone cable in existing surface/ recessed PVC conduit as required Metre 7610 56.98 433617.8

2 M.R. Providing, fixing in walls including cutting in wall, grouting & finishing, connecting and

testing of following pair solderless telephone tag blocks mounted in powder coated box of

required size with hinged lockable cover and clamps for dressing of wires etc complete as

required.

a) 300 pairs Each 5 21916.25 109581.25

b) 100 pairs Each 7 13149.75 92048.25

c) 50 pairs Each 11 10519.80 115717.8

d) 20 pairs Each 21 8766.50 184096.5

e) 10 pairs Each 11 7889.85 86788.35

3 M.R Providing, laying, connecting and testing of multi-core telephone un-armoured cable of

conductor size 0.61 mm dia annealed copper conductor PVC insulated PVC sheathed along

with wall or ceiling or through existing pipe etc as required.

a) a) 100 pair telephone cable Meter 17 1139.65 19374.05

b) b) 50 pair telephone cable Meter 25 1227.31 30682.75

c) c) 20 pair telephone cable Meter 328 701.32 230032.96

d) d) 10 pair telephone cable Meter 81 394.49 31953.69

4 M.R Providing, fixing, connecting, testing and commisssioning of zinc passivated box with

moulded plate in recess or on surface moulded type with following including all necessary

materials etc. as required.

a) 2 Pair telephone cord outlet (RJ-11) Each 393 284.91 111969.63

Total (in Rs.)

Sub Head - IX : MATV System

Sl.

No.


(Rs.)

1 MR Supplying, fixing of T.V. antennna socket outlet on the modular plate type switch plate with

zinc passivated box and along with modular base & cover plate in recess as required. Each 105 398.88 41882.4

2 MR Supplying and drawing of coaxial T.V cable RG-6 solid copper conductor PE insulated,

shielded with fine tinned copper braid and protected with PVC sheath in the existing

surface/recessed PVC conduit as required. Metre 6978 135.88 948170.64

3 MR Supplying and fixing outlet box with locking arrangement of size 250 x 200 x 100 mm 16

gauge sheet steel in recessed as required. Each 48 319.98 15359.04

4 Supplying and fixing of following splitter/tap off with suitable boxes as required.

MR a) 4 way splitter Each 40 574.21 22968.4MR b) Tap off Each 30 407.64 12229.2

Total (in Rs.)

Sub-head : XII - Fire Alarm & Public Address System

1 MR Supply, Installation, Testing and Commissioning of Microprocessor based intelligent,

addressable, modular, networkable, loop expandable upto 2 loops fire alarm control panel

with minimum 5.7" graphic touch screen display with soft keys for displaying alarm,events

and operating functions, Compatible with grafic user interface for pin point identification of

the fire location and fire alarm system control with possibility to double the panel processor

for redundancy, Diagnostic functions for total current consumption,Day/Night operation

function, Remote maintenance service feature etc. The panel shall have 240 volts AC power

supply, automatic battery charger, 24 volts, sealed lead acid maintenance free batteries

sufficient for 24 hours normal working and then be capable of operating the system for 30

minutes during emergency condition.The panel shall be integrated with public address

system.

2 Loop Panel Nos 2 701320.00 1402640

2 MR Supply, Installation, Testing and Commissioning of Active Repeater panel, capable of

networking and monitoring all the detectors / devices.The Panel have alphanumeric character

back lit LCD display with complete function keys for programming and control like system

reset, alarm acknowledge,alarm silence,trouble acknowledge etc.as per specification.

Nos.

Sl.

No.


(Rs.)

3 MR Supply, Installation, Testing and Commissioning of intelligent plug-in type addressable

multisensor Optical / Thermal detector with in built fault isolator feature (either in detector

Head or in detector Base) including the cost of base plate as per detailled technical

specification. (For Critical Areas) Nos. 42 6136.55 257735.1

4 MR Supply, Installation, Testing and Commissioning of Intelligent plug-in type addressable Duct

detector including the cost of base plate.(For AHU Ducts) Nos. 21 13149.75 276144.75

5 MR Supply, Installation, Testing and Commissioning of Addressable Beam detector having

transmitter & receiver units complete as required.(For Double Height areas) Nos. 9 92048.25 828434.25

6 MR Supply, Installation, Testing and Commissioning of Intelligent plug-in type addressable

optical smoke detector with in built fault isolator feature (either in detector Head or in

detector Base) including the cost of base plate. Nos 55 8328.18 458049.9

7 MR Supply, Installation, Testing and Commissioning of Intelligent plug-in type addressable heat

detectors with built in fault isolator feature (either in detector Head or in detector Base)

including the cost of base plate. Nos 26 10997.57 285936.82

8 MR Supply, Installation, Testing and Commissioning of Addressable control modules for

Sounders, AHU & stairs Pressurization Fan, Access control Integration etc complete as

required. Nos 10 7889.85 78898.5

9 MR Supply, Installation, Testing and Commissioning of Addressable Monitor Module with

minimum of 2 monitoring inputs for sprinkler flow switch ,fire doors,magnetic contacts

complete as required. Nos 10 83507.93 835079.3

10 MR Supply, Installation, Testing and Commissioning of Response Indicators complete as requied

Nos 10 504.07 5040.7

11 MR Supply, Installation, Testing and Commissioning of Addressable Manual Call Point break

glass type with Alarm LED complete. Nos 22 5150.32 113307.04

12 MR Supply, Installation, Testing and Commissioning of Addressable type Base Sounder with the

cost of mounting complete as required. Nos 22 5763.97 126807.34

13 MR Supply, Installation, Testing and Commissioning of Addressable type Sounder with the cost

of mounting complete as required. Nos 31 8402.69 260483.39

Sl.

No.


(Rs.)

14 MR Supply, Installation, Testing and Commissioning of Strobe lights with light intensity >2cd

shall be synchronised for better evacuation complete as required. Nos 10 7692.60 76926

15 MR Supply, Installation, Testing and Commissioning of 2 x 1.5 sq. mm FRLS, PVC, insulated

copper conductor cable. Mtr. 1500 144.65 216975

Supply, installation, testing & commissioning of following Control Equipment :

16 MR Central Controller and processor for public address systems with equiped capacity and

required interface to connect min 4 call station microphone, 4 music sources, 4 aux souces

and min 8 zone output as per specification Nos 3 179227.76 537683.28

17 MR Dual Channel Power Amplifier, min 250W per channel, 100 V line output per channel, Front

LCD display, Built is DSP processor for equalization, 19" rack mountable, programming and

monitoring through PC software.(min 10% standby) Nos

18 MR Professional 19 inch rack mountable multichannel (min 4 channel out) Hard Disk based/SD

Card Based MP3 Players (Approved make : BOSE/ Xspat/ Alcorn/Denon/Tascam) Nos

19 MR Equipment Rack 800 mm x 800 mm for housing Central Controller, Amplifiers and Music

Source, consisting of mains panel, climate control, power distribution, cable channel etc as

required. As per approved make or equivalent. Nos

20 Software

Supply, installation, testing & commissioning of following: MR PC Control Software along with Desktop PC of Core 2 Duo , 2 GB Ram, 160 GB HDD,

DVD RW, 19" LCD Monitor , Mouse , Keyboard for complete programming and monitoring

of Controller, amplifiers of PA system (Software should compatible to controller and

amplifier for achieveing systems requirement and operation)(Approved Make for PC :

HP/Dell/IBM) Nos

Call Stations

21 MR Call Stations with High Quality Condenser Microphone on gooseneck, Keypad /Touch LCD

for min 8 zone selection, (Approved make Nos

22 MR 6W Full range Ceiling speaker, saftey EN 60065, Frequency response 70 Hz to 18 KHz, SPL

at 1W, 1m 91 dB with built in LMT. Nos 30 5071.42 152142.6

Sl.

No.


(Rs.)

Car Call Console

Supply, installation, testing & commissioning of following:

23 MR Digital Car Call console with press to talk button, clear busy indication housed in metal

housing, CAT-6/fiber connectivity. 4 170.95 683.8

Cables & Acessories

Supply, installation, testing & commissioning of following:

24 MR Digital Remote Call station Interface for connecting Car call console with CAT-6/Fiber

connectivity. Nos.

25 MR CAT 6 Cable Mtrs

26 MR PVC sheathed Two Core Twin Twisted Speaker Cable 48/0.2mm or equivalent AWG in

existing conduit/floor channel as per site Mtrs 500 223.55 111775

27 MR Two Core Twin Twisted armoured Speaker Cable 48/0.2mm or equivalent AWG as per site

Mtrs 938 512.84 481043.92

Total (in Rs.)


2 MR Supplying at site, installation, testing and commissioning of 16 passenger lifts (machine room

less), speed 1.5 metre per second serving Ground to Second Floor (3 landing and 3 stops)

approx. 8.4metre travel, suitable for operation on 415 volts, 3 phase, 50 cycles, A.C. electric

power supply, complete with contral panel, horizontal stainless steel sliding doors, all safety

devices including automatic resque devices, all fixtures with stainless steel face

plates/finishes, handrail on three sides etc. with interior of car as per specification as

approved by Owner / Architect complete in all respects including supplying, laying and

termination of copper signal cable/communication cable of required size and core from

supervisory display panel located at a central place to each lift control room with supply &

fixing of supervisory display panel as per specification. Nos. 1 2629950.00 2629950

Total (in Rs). 31157439

Sl.

No.

Deptt. Item

No.

Description Unit Quantity Rate Amount (Rs)

SUB HEAD : 1 WATER SUPPLY

1 PHE

SR

01-07-08

Providing and fixing G.I. Pipes complete with G.I. Fitting, Clamps, including cutting, making

the good wall. (Exposed on walls shafts and terrace)

1.2.1.1 15 mm dia nominal bore Meter 386 60.53 23364.58






2 PHE

SR

01-07-08

Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and

making good the wall.



3 PHE

SR

01-07-08

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling

etc. (external work)

1.3.3 25 mm dia nominal bore Meter 321 88.75 28488.75

1.3.4 32 mm dia nominal bore Meter 82 104.44 8564.08

4 PHE

SR

01-07-08

Making connection of G.I. distribution branch with G.I. main of following sizes by

providing and fixing tee, including cutting and threading the pipe etc. Complete.

1.4.1 25 to 40 mm nominal bore Connection 95 99.37 9440.15

5 Providing and fixing C.P.brass bib cock of approved quality confirming to IS : 8931.

1.90 15 mm dia nominal bore Each 235 174.08 40908.80



Sheet- 1A

SCHEDULE OF QUANTITY ITEMS BASED ON SCHEDULE OF RATE BUILDING (SR)

Package - III

Building Name:- Training Block - 1A, Training Block - 1B, Training Block - 1C, Training Block - 1D and Administrative Block,Building Name - Main Gate, Gas Godown,

Pared Ground,UG Tank, Police Station, ESS Building,Watch Tower 1 & 6, Reserve Office, Dir. Residence, Driver Accomn. & Garrage, Training Complex (T8) & Watch Tower

-2

Sl.

No.

Deptt. Item

No.


6 PHE

SR

01-07-08

Providing and fixing C.P.brass stop cock (concealed) of standard design and of approve

dmake conforming to IS: 8931.

1.93 15 mm dia nominal bore Each 221 174.08 38471.68

7 PHE

SR

01-07-08

Providing and fixing gate valve with C.I. wheel of approved quality (screwed end).

1.9.4 32 mm dia nominal bore Each 17 245.43 4172.31


8 PHE

SR

01-07-08

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the

main.


9 PHE

SR

01-07-08

Providing and fixing PVC connection pipe with brass unions.

45 cm length

1.13.2.1 15 mm dia nominal bore Each 311 33.84 10524.24

10 Providing and fixing C.P. brass shower rose 15 or 20 mm inlet.

1.14.1 100 mm diameter Each 146 24.01 3505.46

11 PHE

SR

01-07-08

Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved

quality.

1.78.1 15 mm diameter pipe Each 229 1.61 368.69






12 PHE

SR

01-07-08

Providing and filling sand of grading zone V or coarser grade alround the G.I. pipes in

external work.

1.79.3 25 mm dia pipe Each 74 16.68 1234.32

Sl.

No.

Deptt. Item

No.


13 PHE

SR

01-07-08

1.89 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of

approved brand and manufacture with cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but without fittings and the base support

for tank. Per Litre 70644 4.18 295291.92

14 1.91 Providing and fixing C.P. brass long body, bib cock of approved quality conforming to IS

standards.

a) 15 mm nominal bore Each 506 248.46 125720.76

15 PHE

SR

01-07-08

1.94 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

quality conforming to IS: 8931

a) 15 mm nominal bore Each 1115 197.49 220201.35

TOTAL 1354606.27

SUB HEAD :2 SANITARY INSTALLATION

16 PHE

SR

01-07-08

2.1.1 Providing and fixing white vitreous china pedistal type water closet (European type W.C.

Pan) with seat and lid C.P. brass hinges and rubber buffers, 10 litre low level P.V.C. flushing

cistern with fittings. C.I. / M.S. brackets 40mm diameter flush bend with fittings and clamps,

overflow arrangement with specials and mosquito proof coupling of approved municipal

design complete including painting of fittings and brackets, cutting and making good the

walls and floors wherever required.

W.C. pan with white solid plastic seat and lid. Each 118 1478.37 174447.66

17 PHE

SR

01-07-08

2.1.2 Providing and fixing white vitreous china water closet squatting pan (Indian type W.C. Pan)

with 100 mm sand cast iron P or S trap.10 Litre low level P.V.C. flushing cistern (of

approved make) with fittings. C.I. M.S. brackets, 32 mm diameter flush pipe with fittings and

clamps, overflow arrangement with specials and mosquito proof coupling of approved

municipal design including painting of fittings and brackets, cutting and making good the

walls and floors wherever required.

Long pan pattern W.C. pan of size 580 mm with flush pipe & overflow arrangement. Each 13 679.03 8827.39

18 PHE

SR

01-7-08

Providing and fixing white vitreous china flat back or wall corner typelipped urinal basin of

430x260x350 mm sizes respectively with automatic flushing cistern with C.I./M.S. brackets

standard size of G.I. flush pipe and C.P. brass spreaders with brass unions and G.I. clamps

complete, including painting of fittings and brackets, cutting and making good the walls and

floors wherever required.

2.4.2 One urinal basin with 5 litre P.V.C. automatic flushing cistern. Each 91 1526.87 138945.17

Sl.

No.

Deptt. Item

No.


19 PHE

SR

01-7-08

Providing and fixing C.P. brass waste for sink or wash basin.

2.34.1 32 mm dia Each 125 62.56 7820.00

2.34.2 40 mm dia Each 59 69.65 4109.35

20 PHE

SR

01-7-08

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings

complete.

Flexible Pipe

2.34A.2.1 32 mm dia Each 125 33.04 4130.00

2.34A.2.2 40 mm dia Each 59 35.39 2088.01

21 PHE

SR

01-7-08

19.30 Providing and fixing 100 mm sand cast Iron grating for gully, floor or nahani trap.

Each 149 10.23 1524.27

23 PHE

SR

01-7-08

Providing and fixing stainless steel jali (grating) with or without hole for waste pipe for floor

/ nahani trap.

2.38A.1 75 mm dia weight not less than 70 gms Each 116 16.13 1871.08

24 PHE

SR

01-7-08

2.42 Providing and fixing 600x450 mm bevelled shape edge or supertor ( or approved quality)

complete with 6 mm thick miror hard board ground fixed to wooden cleats with C.P. brass

screws and washers complete. Each 282 356.42 100510.44

25 PHE

SR

01-7-08

Providing and fixing toilet paper holder

2.45.1 C.P. brass Each 129 78.84 10170.36

26 PHE

SR

01-7-08

Providing and fixing soil, waste and vent pipes

2.48.1.1 100 mm dia Sand cast iron S & S Pipe Meter 2804 285.15 799560.60

2.48.2.1 75 mm dia Sand cast iron S & S Pipe Meter 672 241.97 162603.84

27 PHE

SR

01-7-08

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron / Cast iron

(spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix

( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of

cutting holes and making good the walls etc.

2.49.1 For 100 mm dia pipe Each 457 39.29 17955.53

2.49.2 For 75 mm dia pipe Each 167 39.24 6553.08

Sl.

No.

Deptt. Item

No.


28 PHE

SR

01-7-08

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm

thick bolts and nutts complete.

100 mm

2.50.1.1 Sand cast iron S&S Each 72 173.18 12468.96

75 mm dia


29 PHE

SR

01-7-08

Providing and fixing double equal junction of required degree with access door, insertion

rubber washer 3mm thick, bolts & nuts complete.

100 x 100 x 100 x 100 mm


75 x 75 x 75 x 75 mm


30 PHE

SR

01-7-08

Providing and fixing double equal plain junction of required degree.

100 x 100 x 100 x 100 mm


75 x 75 x 75 x 75 mm


31 PHE

SR

01-7-08

Providing and fixing single equal plain junction of required degree with access door,

insertion rubber washer 3 mm thick bolts and nuts complete.

100 x 100 x 100 mm


75 x 75 x 75 mm


32 PHE

SR

01-7-08

Providing and fixing double unequal junction of required degree with access door, insertion

rubber washer 3 mm thick bolts complete.

100 x 100 x 75 x 75 mm


Sl.

No.

Deptt. Item

No.


33 PHE

SR

01-7-08

Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and

fittings of diameter.

2.70.1 100 mm Each 741 74.62 55293.42

2.70.2 75 mm Each 669 63.73 42635.37

34 PHE

SR

01-7-08

Providing and fixing M.S stays and clamps for sand cast iron / centrifugally cast (spun) iron

pipes of diameter.

2.71.1 100 mm Each 725 32.66 23678.50

2.71.2 75 mm Each 117 31.78 3718.26

35 PHE

SR

01-7-08

Providing and fixing sand cast iron trap of self cleaning design with sand cast iron screwed

down or hinged grating with or without vent arm complete, including cost of cutting and

making good the walls and floors.

2.72.1 100 mm inlet and 100 mm outlet Each 80 262.87 21029.60

2.72.2 100 mm inlet and 75 mm outlet Each 138 221.55 30573.90

36 PHE

SR

01-7-08

Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally

cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3

coarse sand and 6 graded stone aggregate 12.5mm nominal size) including necessary plaster

in cement mortar 1:4 (1 cement : 4 coarse sand)

2.92.1 100 mm Meter 114 82.39 9392.46

2.92.2 75 mm Meter 84 58.94 4950.96

37 PHE

SR

12-11-09

12.78 Providing and fixing on wall face uplastidsed-PVC (working pressure 4 kg per sqcm) rain

water pipes conforming to IS : 4985 including jointing with seaf ring conforming to IS : 5382

leaving 10 mm gap for thermal expansion.

12.78.1 75 mm diameter Meter 312 90.43 28214.16

12.78.2 110 mm diameter Meter 979 160.21 156845.59

38 PHE

SR

12-11-09

12.79 Providing and fixing on wall face unpfasticised PVC moulded fittings/accessories for

unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring

conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.79.4 Single tee without door

12.79.4.2 110x110x110mm Each 59 206.04 12156.36

12.79.5 Band

12.79.5.1 75 mm bend Each 50 82.06 4103.00

12.79.5.2 110 mm bend Each 37 128.62 4758.94

TOTAL 1904445.89

GRAND TOTAL 3259052.16

Sl.

No.

Deptt. Item

No.

Description Unit Quantity Rate Amount

(Rs)


1 CPWD Providing and fixing ball valve (brass) of approved quality complete.

High or low-pressure with plastic floats



2 CPWD Construction masonry chamber 30 x 30 x 50 cm inside with 75 class designation brick

work in cementmortar 1:5 (1 cement : 5 fine sand) for stop cock, with C.I. surface box 100

x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 (1 cement :

2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation

foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm

nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand)

12mm thick finished with a floating coat of neat cement complete as per standard design.

18.32 With F.P.S bricks Each 98 787.67 77191.66

TOTAL - 179533.23


3 CPWD 17.33 Providing and fixing 600 x 120 x 5 mm glass shelf with edges rounded off supported on

anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed

with 40 mm long screws, rawl plugs etc. complete. Each 207 287.72 59558.04

4 CPWD 17.73.2 Providing and fixing towel rail complete with brackets fixed to wooden cleats with C.P.

brass screws. Each 189 433.28 81889.92

TOTAL 141447.96


Sheet- 1B




Package - III




Sl.

No.

Deptt. Item

No.


(Rs)


Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making

good the wall.

MR 25 mm dia nominal bore Meter 154 591.74 91127.96

TOTAL 91127.96


MR Providing and fixing inlets fitting with max. 3 inlets 32, 40 or 50mm size fabricated from

100mm dia pipes and fixed to CI trap and set in 1:2:4 cement concrete as per standard

drawing complete. Each 252 1095.81 276144.12

1 MR Providing and fixing white vitreous china flat back half stall urinal of 580x380x350mm

with fully automatic battery operated, photo electric cell type flushing system comprising

of solenoid valve, concealed copper piping, wiring & sensor complete in fully operating

condition including standard size C.P. brass flush pipe, spreader with union, CP clamps

and screws, CP flanges, waste fitting as per IS : 2556 and CP bottle trap, complete

including cutting & making good the walls and floor wherever required Each 81 12273.10 994121.10

2 MR Providig and Fixing white vitreous china oval wash basin of 560mm x 410mm size with

specially fabricated M.S. or CI brackets, 32mm CP brass waste of standard pattern, 32mm

dia C.P. brass bottle trap Piller taps and making connection to the waste pipe in wall with

C.P wall flange and rubber adopter complete with required accessories including

painting of brackets and cutting and making good the walls wherever required. Each 248 4874.17 1208794.16


Sheet- 1C



Package-III




Sl.

No.

Deptt. Item

No.


(Rs)

3 MR Providing and fixing white vitreous china Kitchen sink with C.I. brackets, C.P. brass chain

with rubber plug 40 mm C.P.brass waste and 40 mm C.P. brass trap with necessary C.P.

brass unions complete including painting brackets, fittings, cutting and making goog the

wall wherever required.

Kitchen sink with drain board.

Size 510 x 1040 bowl depth 178 mm Each 34 3506.60 119224.40

4 MR Providing and fixing rubber plug for sink or wash basin. Each 266 87.67 23320.22

5 Providing and fixing G.I Class-B waste pipe.

MR 32 mm Meter 353 350.66 123782.98

MR 50 mm Meter 77 438.33 33751.41

6 Providing and fixing floor clean out plug / clean out plug for cast iron soil or waste pipes

comprising of C.I. Plug, nipple, bend including lead jointing etc. complete.

MR For 100 mm dia pipe Each 17 1227.31 20864.27

TOTAL 2800002.66


AN ISO 9001 & 14001 COMPANY TENDER DOCUMENT...

Documents

Transcript of AN ISO 9001 & 14001 COMPANY TENDER DOCUMENT...