All equipment for the rubber industry Today Agila NV produces and delivers sophisticated machinery for the rubber industry, either it regards compounders or producers of final products. An important sideline is the transformation, the updating and the adaptation of existing machines to the latest security standards. Thanks to a team of specialists, and the advanced machinery, all machines can be fully made by the company itself, from design to the testing, as well as the assembly and the finishing.

Although made-to-measure machines are still produced, Agila NV promotes its technically and economically competitive basic version of all machines, which requires a short delivery time. Many options are possible with this basic version and moreover it is a model which reflects more than 50 years of knowledge and experience in the rubber industry and which is totally geared towards the target group.

Intelligent presses for Rubber & Plastics Lab presses from 200 KN to 1000 KN closing force. Compression presses up to 10000 KN closing force. All presses are supplied with a complete cycle control.

Hydraulic bale cutting machines Different types : 50 KN, 100 KN, 200KN, 250 KN

Lab mills and production mills Mills from dia.: 150x350mm to dia.: 750x2500mm. Variable speed and friction. DC-motors or AC-motors with frequency control. Hydraulic driven mills. Peripheral drilled rolls, with heating and cooling possibilities.

AGILA NV Rozendaalstraat 24

8900 IEPER BELGIUM

Tel.+ 32 57 21 61 61 Fax + 32 57 20 65 56

E-mail: info@agila.be

website : www.agila.be

MILLS RUBBER

AC motor

2 x AC motor

2 x HAmet hydraulische motor

LABORATORY MILLS FOR RUBBER

Ø 150 x 350 2xAC motor –variable friction

Ø 200 x 400 2xAC motor –variable friction

Ø 250 x 500 2xAC motor –variable friction

Ø 300 x 600 2xAC motor –variable friction

PRODUCTION MIILS FOR RUBBER

Ø 400 x 900

Ø 400 x 1000

Ø 450 x 1200

Ø 500 x 1300

Ø 550 x 1500

Ø 600 x 1800

Ø 650 x 2100

Ø 750 x 2500

All machines are available with following drives :

fixed friction –fixed speedfixed friction –variable speed

variable friction 0.65 –1.35variable speed to 32 m/min

variable friction –variable speedvery big torque !!

Stockblender- Hydraulically slideable shield-Stripcuttingsystem

Mills for silicone rubber compounds

ALL EQUIPMENT FOR THE RUBBER INDUSTRY

AGILA N.V. Rozendaalstraat 24 8900 Ieper tel:+32 (0)57216161 fax:+32(0)57206556 info@agila.be www.agila.be

BALE CUTTING MACHINES

Bale cuttersType SM0 - 50 KN knive force

Type SM1 - 100 KN knive force

Type SM2 - 200 KN knive force

Type SM3 - 250 KN knive force

Bale cutting machines with manual feed

Bale cutting machines available with a supply and dischargeconveyor. These machines are fully automatic.

Bale cutting machines with control equipments for length.

Bale cutting machines for cutting plastics

Machines are available in stainless steel

ALL EQUIPMENT FOR THE RUBBER INDUSTRY

AGILA N.V. Rozendaalstraat 24 8900 Ieper tel:+32 (0)57216161 fax:+32(0)57206556 info@agila.be www.agila.be