All equipment for the rubber industry Today Agila NV produces and delivers sophisticated machinery for the rubber industry, either it regards compounders or producers of final products. An important sideline is the transformation, the updating and the adaptation of existing machines to the latest security standards. Thanks to a team of specialists, and the advanced machinery, all machines can be fully made by the company itself, from design to the testing, as well as the assembly and the finishing.
Although made-to-measure machines are still produced, Agila NV promotes its technically and economically competitive basic version of all machines, which requires a short delivery time. Many options are possible with this basic version and moreover it is a model which reflects more than 50 years of knowledge and experience in the rubber industry and which is totally geared towards the target group.
Intelligent presses for Rubber & Plastics Lab presses from 200 KN to 1000 KN closing force. Compression presses up to 10000 KN closing force. All presses are supplied with a complete cycle control.
Hydraulic bale cutting machines Different types : 50 KN, 100 KN, 200KN, 250 KN
Lab mills and production mills Mills from dia.: 150x350mm to dia.: 750x2500mm. Variable speed and friction. DC-motors or AC-motors with frequency control. Hydraulic driven mills. Peripheral drilled rolls, with heating and cooling possibilities.
AGILA NV Rozendaalstraat 24
8900 IEPER BELGIUM
Tel.+ 32 57 21 61 61 Fax + 32 57 20 65 56
E-mail: [email protected]
website : www.agila.be
MILLS RUBBER
AC motor
2 x AC motor
2 x HAmet hydraulische motor
LABORATORY MILLS FOR RUBBER
Ø 150 x 350 2xAC motor –variable friction
Ø 200 x 400 2xAC motor –variable friction
Ø 250 x 500 2xAC motor –variable friction
Ø 300 x 600 2xAC motor –variable friction
PRODUCTION MIILS FOR RUBBER
Ø 400 x 900
Ø 400 x 1000
Ø 450 x 1200
Ø 500 x 1300
Ø 550 x 1500
Ø 600 x 1800
Ø 650 x 2100
Ø 750 x 2500
All machines are available with following drives :
fixed friction –fixed speedfixed friction –variable speed
variable friction 0.65 –1.35variable speed to 32 m/min
variable friction –variable speedvery big torque !!
Stockblender- Hydraulically slideable shield-Stripcuttingsystem
Mills for silicone rubber compounds
ALL EQUIPMENT FOR THE RUBBER INDUSTRY
AGILA N.V. Rozendaalstraat 24 8900 Ieper tel:+32 (0)57216161 fax:+32(0)57206556 [email protected] www.agila.be
BALE CUTTING MACHINES
Bale cuttersType SM0 - 50 KN knive force
Type SM1 - 100 KN knive force
Type SM2 - 200 KN knive force
Type SM3 - 250 KN knive force
Bale cutting machines with manual feed
Bale cutting machines available with a supply and dischargeconveyor. These machines are fully automatic.
Bale cutting machines with control equipments for length.
Bale cutting machines for cutting plastics
Machines are available in stainless steel
ALL EQUIPMENT FOR THE RUBBER INDUSTRY
AGILA N.V. Rozendaalstraat 24 8900 Ieper tel:+32 (0)57216161 fax:+32(0)57206556 [email protected] www.agila.be
Top Related