Adams Rite - IDN Inchardware.idn-inc.com/.../books/AdamsRitePriceList.pdf · Founded in 1896, Adams...

Representatives maybe found at:www.adamsrite.com

Prices Effective July 15, 2012

LIT-DISTPRICESPrice List – PR-101, Rev. 06/2012

Founded in 1896, Adams Rite Manufacturing Co. is a market leader in locks and architectural hardware for security, safety and control. The company’s customer base includes specifiers, architects and designers.

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.

10027 S. 51st Street #102 Phoenix, AZ 85044Phone: Fax: (800) 232-7329

Adams Rite

List prices effective July 15, 2012

phone: (800) 872-3267 fax: (800) [email protected]

CONTACT:

HARDWARE THAT PERFORMS

2 List prices effective July 15, 2012

TABLE OF CONTENTS

GENERAL INFORMATIONAdams Rite Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Standard Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Handing of Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Glossary of Terms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

PRODUCTSDeadlocks and Related HardwareMS1850S Series – Stainless Steel Bolt, Maximum Security Deadlock . . . . . . . . . . . . . . . . . . . . . . . . 10MS1950 – All Stainless Steel Maximum Security Deadlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104036 – Mortise Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114066 – Thumbturn Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114550 – Lever Operator for MS Deadlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11MS+1890 Series – Hookbolt Deadlatch and Latch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114505 – Armored Box Strike. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12MS1880/MS1881 – 2-Way Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12MS2180/MK2180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124104 – Mounting Bridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1291-0965 – Universal Mounting Tab Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1291-0966 – Universal Mounting Tab Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12MS4043 – Cylinder Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134000 Series – Strikes for MS Deadlocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134005 – Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134006 Series – Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134089, 4089-20 – Exit Indicator and Sign. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1420-0255 – Header Sign. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1420-0256 – IBC Header Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1491-0912 – Adapter Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144015 – Two-Point Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14MS1837 – Two-Point Wood Door Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141877 – Cylinder Operated Flushbolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144085 – Positioner Bolt and Header Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154016 – Three-Point Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151830 – Bottom Rail Deadlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154006 – Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3List prices effective July 15, 2012

MS1861 – Bottom Rail Deadlock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154014 – Conversion Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151870, 1870HM – Cylinder Operated Flushbolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161875 – Two-Point Deadlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164060 – Turn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164070 – Deadlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164170 – Trim Strike. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Deadlocks, Latches, Handles and Strikes2190 Series – Complete Deadbolt/Deadlatch Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172190 Series – Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182290 Series – Complete Deadbolt/Deadlatch Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192290 Series – Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204900 Series – Heavy Duty Deadlatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214920 ANSI Series – Heavy Duty Deadlatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214510 – Standard Duty Deadlatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224530 – Standard Duty Deadlatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224300 Series – eLatch Electrified Deadlatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224901/4902 Series – Box Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234506 – Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234781 – Two-Point Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234568 Series – Lever Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244569 Series – Lever Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2491-0128-xx – Thick Door Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2426-0203-xx – Thick Door Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244560 – Lever Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244565 – Turn Lever. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244580 – Cam Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254590 – Paddle Operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254591 – Paddle Operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2591-0914 – Monitor Switch Kit (4591) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254600 – Heavy Duty Designer Lever Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264581 – Universal Cam Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273090 eForce-150 Keyless Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273090 eForce Prox and iCLASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27B1900 Series Reinforcing Pivots, B1921, B1923 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Deadlocks and Related Hardware (cont'd)

TABLE OF CONTENTS


Electric Strikes7100 Series – Electric Releases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297100 Electric Strike Component Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307200 Series – Fire-Rated Electric Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3191-0171-xx – Lip Extension Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3191-0172-xx – Lip Extension Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31PS-1 – Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324603 – Rectifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324605 – Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324606 – Plug-In Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324612 – Wire Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3229-0218 – Piezo Electric Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327400 Series – UltraLIne Electric Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3274R1 – Electric Strike for Rim Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3374R2 – Electric Strike for Rim Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33LEK7400 – Lip Extension Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33VA7400-16VDC – 16 volt DC Adapter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33WDC7400 – Wood Door Cover Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33ELX – ElectroLynx™ Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347400A, 7401A – Body Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34FPK74xx – Faceplate Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Exit Devices8100 Series – Surface Vertical Rod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358055 – Tall Door Kit for Surface Vertical Rod Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358200 Series – Surface Vertical Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358300 Series – Mortise Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368360 – Long Lip Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368400 Series – Mortise Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378455-01 – Optional Long Face Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378460-17 – Optional Long Lip Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3791-0995-xx – Thick Door Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3791-0325-xx – Thermal Door Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378500 Series – Concealed Vertical Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .388600 Series – Concealed Vertical Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388655 – Tall Door Kit for Concealed Vertical Rod Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388700 Series – Rim Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398800 Series – Rim Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398900 Series – For Wood Doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

TABLE OF CONTENTS


8955-01 – Tall Door Kit for 8900 Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393100 Series – Surface Vertical Rod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403055 – Tall Door Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403300 Series – Mortise Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414009-01 – Open Back Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413600 Series – Concealed Vertical Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413655 – Tall Door Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413700 Series – Rim Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423900 Series – Semi-Concealed Top Rod Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4226-0584 – Sex Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Trim Options and Accessories for Exit Devices3080 Series – Clutched Lever Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4391-0686 – Adapter Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438650 – Cylinder Escutcheon Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443001, 3002 – Fixed Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444036 – Mortise Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448736 – Rim Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Exit Device Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4591-0897-01, -02 – Monitor Switch Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 468099, 8099M, 8099MM – Dummy Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463889 – Removable Mullions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463890 – Removable Mullions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Sliding Door HardwareMS1850S-050 Series – Hookbolt Deadlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47MS1850SNS-050 – Hookbolt Deadlock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47MS1950-050 – Hookbolt Deadlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474015 – Two-Point Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472331 – Deadlock and Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475015 – Deadlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475017 – Deadlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471015 – Turn. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471016 – Outside Escutcheon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474810 – Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474026 – Cylinder Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47MS1848 Series – Deadlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48MS1847 Series – Deadlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Exit Devices (Cont'd)

TABLE OF CONTENTS


1000 Series – Turn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484024 – Cylinder Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494025 – Cylinder Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494029 – Cylinder Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49MS4804 – Reinforcing Strike and Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494800 Series – Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494189 Series – Flush Lockset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504190 – Flush Lockset with Cylinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504195 – Dummy Flushset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504413 – Grip Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504430, 4431 – ABS Flush Lockset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504432 – ABS Dummy Flushset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504453-02 – Grip Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504570 ICU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Sliding Door Hardware (Cont'd)

TABLE OF CONTENTS


LIMITED WARRANTY, TERMS AND CONDITIONS

Adams Rite Manufacturing Company (hereinafter ADAMS RITE) manufactures its products in a manner to be free of defects. Should any defect of manufacture (in material or work-manship) occur in its products ADAMS RITE, upon prompt notification and proof to its satisfaction that the product was defective in manufacture for the use intended by ADAMS RITE, will at its option, exchange the product, repair the defect or refund the price charged by ADAMS RITE, FOB factory based on the following schedule: All mechanical products for five (5) years from date of manufacture. All electrical products for three (3) years from date of manufacture except Exit Devices with SE option. SE Exit Devices: One (1) year warranty for Exit Devices with SE option. Installing SE Exit Devices with PS-SE power supply extends the warranty to three (3) years. Ultraline Electric Strikes for five (5) years from date of manufacture. Limitations and Exclusions:This is a limited warranty and is in lieu of all other warranties (including the implied warranties of merchantability and fitness for use) and under no circumstances shall ADAMS RITE be liable for any incidental or consequential damages or losses.

This warranty covers products as outlined above manufactured from May 1, 2003 forward.

THIS WARRANTY DOES NOT COVER DAMAGES FROM SUCH CAUSES AS ABUSE, ACCIDENT, NEGLECT, FIRE OR FREIGHT DAMAGE.

Returned Goods:Defects or errors for which we are responsible will be corrected promptly. Defective merchandise will be credited or replaced in accordance with our LIMITED WARRANTY upon inspection by Adams Rite. Written authorization must be obtained from the factory and the goods returned to us prepaid. Merchandise ordered in error by the customer is subject to a minimum 35% restocking charge if returned within 90 days of receipt. Merchandise returned 90-120 days from receipt is subject to a 50% restocking charge. Credit will not be allowed on items held longer than 120 days.

Return Material Authorizations (RMAs) will be closed if the goods are not received within 30 days of issuance.

Cancellation:Orders that require modifications and special materials or are non-stock items are subject to cancellation charges based on manufacturing and material expenses incurred.

LEFT HAND RIGHT HAND

LEFT HANDREVERSE

RIGHT HANDREVERSE


STANDARD FINISHES Nearest BHMA US Equivalent Description

313 Dark Bronze Anodized Aluminum 335 Black Anodized Aluminum 605 US3 Polished Brass, Bright Brass 606 US4 Satin Brass 628 US28 Clear Anodized Aluminum 629 US32 Bright Stainless Steel 630 US32D Satin Stainless Steel 632 US3 Polished Brass on Steel 639 US10* Satin Bronze on Steel 652 US26D Satin Chrome on Steel 666 US3 Bright Brass on Aluminum 667 US4 Satin Brass Plated 672 US26 Polished Chrome on Aluminum 702 US26D Satin Chrome Plated on Aluminum US9* Bright Bronze US10* Satin Bronze, Clear Coated

RITECOAT FINISHES (PAINT) 119 Satin Black 121 Dark Bronze 130 Clear Aluminum PC7 Brass

HANDING OF DOORS

The description of swinging door operation – always viewed from the outside.

*US9 and US10 available by quotation only, consult factory.

OUTSIDEOUTSIDE

INSIDE

FINISHES AND HANDING


GLOSSARY AND ACRONYMS

GLOSSARY OF TERMSBackset The horizontal dimension from the front of the faceplate to the center of the cylinder.

Cam The part on the back of a cylinder that rotates when the key is turned, and operates the lock mechanism.

Deadbolt A lockbolt having no spring action. Usually rectangular and actuated by cylinder or thumbturn.

Deadlatch A lock with a radiused or bevelled spring-loaded latchbolt which may be automatically or manually locked against unauthorized retraction, and will self latch when the door returns to the closed position.

Dogging The means of retaining the lockbolt or exit device mechanism in the open position to allow the door to be free swinging.

Escutcheon An ornamental or protective plate that is fixed to the stile of the door and slips over the cylinder, thumbturn, handle or similar.

Exit Device A horizontal bar running at least two-thirds of the width of the door leaf, where pressure on the bar releases the locking arrangement.

Keyed Alike (KA) All cylinders may be operated by the same key.

Keyed Alike in Pairs (KA2) All cylinders may be operated by the same key.

Keyed Different (KD) Different keys operate each cylinder or group of cylinders.

Latchbolt A bevelled or radius bolt which operates on a spring return so that the lock may self-lock.

Schoolhouse Function The inside operation of the deadlock is limited to unlocking only. The lock is modified to prevent someone (like a student) from locking up the classroom, usually with a thumbturn, from the inside.

Solenoid A device that when energized with electrical current, develops a magnetic pull motion enabling mechanical work to be effected. (Such as plunger movement that releases the blocking arm on electric strikes.)

ACRONYMS BBK Battery Backup Kit C Cylinder Dogging CVR Concealed Vertical Rod ED Electric Dogging EL Electric Latch Retraction (Rim) ELD Electric Latch Option with Mechanical Dogging (Rim) KA Keyed Alike KA2 Keyed Alike in Pairs KD Keyed Different SE Motorized Electric Latch Retraction M1 Single Switch (REX) M2 Dual Switch (REX) MS Maximum Security PS-LR Power Supply - Latch Retraction RC Rite Coat (Paint) SCH Schoolhouse Function SPDT Single Pole Double Throw SVR Surface Vertical Rod

10

Approx.Product Standard Shipping SuggestedNumber Description Finish Weight List Price


DEADLOCKS AND RELATED HARDWARE

MS1850S Stainless Steel Bolt 313, 335, 628 1.5 lb. $ 62.00 Series Maximum Security Deadlock – less strike with plain faceplate, and any shape – 31/32", 1-1/8", 1-1/2" backset.

Order code: MS1850S-215-628 A B C D

A – Faceplate Shape: 0S – Flat 2S – Bevel 1S – Radius 1SW – Radius with Weatherseal B – Backset: 1 – 7/8" 2 – 31/32" 3 – 1-1/8" 4 – 1-1/2" C – Door Hand: 15 – LH or RHR 16 – RH or LHR 10 – Non-handed (Any flat or radius face, except Schoolhouse) D – Finish: 313, 335, or 628

For 7/8" backset to the above. $ 74.00 With weatherseal radius face (MS1851SW) $ 64.00

MS1853S-IB Maximum Security Deadlock – less faceplate. $ 57.50 Individually boxed.

For 7/8" backset to the above. $ 69.50

MS1950 All Stainless Steel Maximum Security Deadlock 313, 335, 628 $ 115.00 With weatherseal radius face (MS1951W) $ 117.00 Not available in 7/8" backset.

MS1850S-050 Hookbolt Deadlock – less strike 313, 335, 628 1.5 lb. $ 62.00 with plain faceplate, any shape. Order code: MS1851S-250-628

A B C D A – Faceplate Shape: 0S – Flat 2S – Bevel 1S – Radius 1SW – Radius with Weatherseal B – Backset: 1 – 7/8" 2 – 31/32" 3 – 1-1/8" 4 – 1-1/2" C – Door Hand: 55 – LH or RHR 50 – Non-handed (Any flat or radius face) 56 – RH or LHR D – Finish: 313, 335, or 628

For 7/8" backset to the above. $ 74.00 With weatherseal radius face (MS1851SW-050) 313, 335, 628 $ 64.00

MS1853S-050-IB Maximum Security Hookbolt – less faceplate. $ 57.50 Individually boxed.

For 7/8" backset to the above. $ 74.00 MS1950-050 All Stainless Steel Maximum Security Deadlock 313, 335, 628 $ 115.00 With weatherseal radius face (MS1951W) $ 117.00 Not available in 7/8" backset.

Schoolhouse Function for above locks add $ 35.50 Rite Coat finish for MS faceplates add $ 5.30

11



MS1850SN Maximum Security Deadlock – less strike. 313, 335, 628 1.75 lb. $ 88.40 1-1/2" Series ANSI size faceplate.

Order code: MS1852SN416-628 A B C

A – Faceplate Shape: 0 – Flat 1 – Radius 2 – Bevel B – Door Hand: 415 – LH or RHR 410 – Non-Handed 416 – RH or LHR (any flat or radius face) C – Finish: 313, 335, or 628

MS1850SN Hookbolt Deadlock – less strike. 313, 335, 628 1.75 lb. $ 88.40 -050 Order code: MS1850SN450-628

A B C A – Faceplate Shape: 0 – Flat 1 – Radius 2 – Bevel B – Door Hand: 455 – LH or RHR 450 – Non-Handed 456 – RH or LHR (any flat or radius face) C – Finish: 313, 335, or 628

Schoolhouse Function for above locks add $ 35.50 Rite Coat finish for MS faceplates add $ 5.30

4036 Mortise Cylinder 313, 335, 628 0.34 lb. $ 34.80 2 keys and 1/4" Ring, KD, KA2, KA50 only.

4066 Thumbturn Cylinder – with 1/4" Ring. 313, 335, 130 0.34 lb. $ 38.30

4550 Lever Operator for MS1850A or MS1850S RC119, RC121, RC130 2.5 lb. $ 175.00 Thick Door (2-1/16" – 2-3/8") add $ 33.00

MS+1890 Hookbolt Deadlock and Latch – with strike. 628 1.75 lb. $ 220.00 Series 313, 335 $ 225.00 31/32", 1-1/8" or 1-1/2" backset with plain faceplate. Strike 630 With weatherseal radius faceplate MS+1891W. add $ 8.50 Order code: MS+1891-3026-628

A B C D E A – Faceplate Shape: 0 – Flat 1 – Radius 1W – Radius with Weatherseal 2 – Bevel

B – Backset: 2 – 31/32" 3 – 1-1/8" 4 – 1-1/2" C – Strike Shape/ 01 – Flat/Standard Jamb 21 – Flat/Center-Hung 4.5" Jamb Lip Length: 02 – Radius/Standard Stile xx – Other Lip Lengths 17 – Flat/Center-Hung 4" Jamb D – Door Hand: 5 – LH or RHR 6 – RH or LHR E – Finish: 313, 335, or 628


4066

4550

MS+1890

sw ms 1880

12



MS+ Deadlock and Latch sets are handed. Order paddle(s) or lever(s) Specify: LH, RH, LHR or RHR. separately

MS+1893-IB Hook Deadbolt and Latch $ 174.00 Less faceplate and strike.

4505-01 Flat Armored Box Strike – for MS+1890 Series. 630 0.25 lb. $ 40.00 4505-17 and Flat Long Lip Armored Box Strike 630 0.25 lb. $ 51.004505-21 (For other special lengths, contact factory.)

4505-02 Radiused Armored Box Strike 630 0.25 lb. $ 40.00 For MS+1891 Series.

for special RC finish add $ 5.20

MS1880/81 2-Way Bolt with Indicator Knob – 2 guides. RC119, RC121, 682 1.5 lb. $ 130.00

TDK-1880 For Door Height Over 84" add $ 23.20

MS2180 Auto-Release Two-Point Flushbolt RC119, RC121, 130 2 lb. $ 195.00 MK2180 Monitoring Kit – Lock Status SPDT switch N/A .1 lb. $ 49.00

Order code: MS2180-07-130 A B C

A – Turn Shape: 80 – Hourglass 82 – Flush 81 – Teardrop B – Door Height: 07 – Up to 7' Door 09 – Up to 9' Door 08 – Up to 8' Door 10 – Up to 10' Door C – Finish to Match 130 – Clear Anodized 335 – Black Anodized 313 – Cark Bronze Anodized

4104-01 Radius Mounting Bridge 1 oz. $ 6.60

4104-02 Flat Mounting Bridge 1 oz. $ 6.60

4104-03 LH Bevel Mounting Bridge 1 oz. $ 6.60

4104-04 RH Bevel Mounting Bridge 1 oz. $ 6.60

91-0965 Universal Mounting Tab Kit – Flat/Radius Stiles $ 10.10 For installing MS locks and latches.

91-0966 Universal Mounting Tab Kit – Beveled Stiles $ 11.90 Includes tabs for RH bevel and LH bevel doors and mounting screws for clear or dark bronze anodized.


13



MS4043 Cylinder Guard – for 5 or 6 pin cylinder. RC119, RC121, RC130 0.125 lb. $ 31.60 MS4043-01 Cylinder Guard – for 1/4" walls. $ 34.00

MS4043-02 Cylinder Guard – for 1-5/16" to 1-7/16" long cylinder. $ 48.00

Order code: MS4043-01-130A B

A – 00 – 1/8" (3,2) Stilewall 5 or 6 pin cylinder 01 – 1/4" (6,4) Stilewall 5 or 6 pin cylinder 02 – 1/8" (3,2) Stilewall 1-5/16" to 1-7/16" long cylinder B – RC119, RC121, RC130

4000 Series Trim Strike 313, 335, 628 0.125 lb. $ 11.30 US3, US26D $ 32.50 for RC $ 16.50

4001 Series Trim and Box Strike 313, 335, 628 0.2 lb. $ 16.20 US3, US26D $ 37.30 for RC $ 21.40

MS4002 Series Armored Trim Strike 313, 335, 628 0.75 lb. $ 45.40 US3, US4, US26D $ 66.60 Order code: 4001-011-628

A B C D E

for RC $ 50.60 A – 4000 – Trim 4001 – Box MS4002 – Armor B – Trimplate Shape: 0 – Flat 1 – Radius C – For Deadlock: 1 – Longbolt 2 – Shortbolt 3 – Hookbolt D – Trimplate Corners: 1 – Square 2 – Round E – Finish: 313, 335, or 628

4003 Series ANSI Strike – for MS Lock. 605, 626 0.2 lb. $ 55.00 for RC119, RC121 $ 60.20 other RC colors $ 65.00

4005 Strike – Stainless. 630 0.5 lb. $ 15.70 For 4015 bolt.

4006 Series Strike – for 1830, stainless. 630 0.2 lb. $ 37.50 for RC119, RC121 $ 42.70 other RC colors $ 45.00


14



4089 Exit Indicator and Sign – for 1-3/4" door. RC119, RC121, RC130 0.5 lb. $ 46.00 Includes both UBC and IBC signs. for other RC colors $ 52.40 4089-20 Exit Indicator and Sign – for 2" to 2-1/2" doors RC119, RC121, RC130 0.5 lb. $ 73.70 Includes both UBC and IBC signs. for other RC colors $ 80.10

20-0255-IP Header Sign 0.5 lb. $ 5.70 “. . . During Business Hours.”

20-0256-IP IBC Header Sign 0.5 lb. $ 5.70 “. . . Building is Occupied.”

91-0912 Adapter Plate – for converting MS1850/4089. RC119, RC121, RC130 0.25 lb. $27.40 Installation to deadlatch and lever handle or paddle.

MS 2Pt Two-Point Deadlock – order basic MS lock plus 4015-18 converter. (Not available with MS+1890 Series.)

4015-18-IB Two-Point Converter – threshold bolt. Zinc-603 1 lb. $ 37.90 Individually boxed. Specify cylinder height. If ordering in a large quantity for specific cylinder height, specify cylinder height.

For cylinder height over 53" add $ 21.00

MS1837 Two-Point Wood Door Lock 313, 628, 335 3 lb. $ 219.00 Includes 4001-011 strike. 605, 626 3 lb. $ 267.00 If cylinder height other than 36" is required for RC add $ 22.10 specify exact height from bottom of door to cylinder center. If trim strike or threshold bolt is required specify 4005 (page 20).

For other than standard 36" cylinder height add $ 44.70

1877 Cylinder Operated Flushbolt – for wood 628, 313 1.75 lb. $ 179.00 If trim strike or threshold bolt is required 605, 626 1.75 lb. $ 227.00 specify 4005 (page 20). for RC add $ 5.20 For other than standard 13-1/2" cylinder height add $ 45.60 1-1/4" backset only


sw 1830

sw 1830sw ms 1861 sw ms 1861

sw 4085

15



MS 3Pt Three-Point Lock – for pair of aluminum doors. Series Order basic MS Lock plus 4015-18. Converter and 4085 Positioner Bolt below.

4085-IB Positioner Bolt and Header Strike Zinc-603 1 lb. $ 73.70 Specify cylinder height and door height. Individually boxed. For doors over 84" add $ 20.00

4016 Three-Point Converter – provides upper bolt for $ 48.00 MS1850/1870. (All locking from 1 Stile. Cannot be used with MS+1890 Series).

Order code: 4016-30-01 A B

A – Backset: 10 – For 1-1/2" Backset MS Lock 20 – For 3-1/32" Backset MS Lock 30 – For 1-1/8" Backset MS Lock B – Door Height: 01 – For Doors up to 7' 02 – For Doors up to 10' Consult factory for applications.

1830 Bottom Rail Deadlock 628 1 lb. $ 123.00 31/32" or 1-1/8" backset only. Order 4006 strike separately if required.

Order code: 1830-02 A

A – Backset: 02 – For 31/32" Backset 03 – For 1-1/8" Backset

4006 Strike 630 $ 37.50 RC119, RC121 $ 42.70 for other RC colors $ 45.00

MS1861-01 Bottom Rail Deadlock (One-Point) 603 1.5 lb. $ 129.00 Vertical bolt operation only.

MS1861-02 Bottom Rail Deadlock (Two-Point) 603 1.5 lb. $ 162.00 Horizontal and vertical bolt operation.

4014 Conversion Kit (Two-Point) 0.25 lb. $ 32.00


VZ

sw 1870 series

16



1870 Cylinder Operated Flushbolt 313, 335, 628 1.5 lb. $ 105.00 12" cylinder height: standard. for other RC colors add $ 5.20 Over 12" cylinder height (specify) add $ 28.70 With weatherseal face (1871W) add $ 1.30 Order code: 1871W-20-628

A B C D A – Faceplate Shape: 1870 – Flat 1871 – Radius 1872 – Bevel 1871W – Radius with weatherseal B – Backset: 2 – 31/32" 3 – 1-1/8" C – Door Hand: 5 – LH or RHR 6 – RH or LHR 0 – Non-handed (any flat or radius face) D – Finish: 313 or 628

See 4016 (page 22) for Three-Point Converter

1870HM Cylinder Operated Flushbolt – for hollow metal. 313, 628 1.5 lb. $ 140.00 1-1/4" backset only.

1875-IB Two-Point Deadlock – individually boxed. Zinc – 603 1.5 lb. $ 158.00 Order 4060 turns separately, giving quantity and door thickness. Order cylinders separately. Contact factory regarding mounting spacers, bolts rods, guides and strikes for a particular door design.

4060 Turn – for 1875. RC130 0.25 lb. $ 52.50 4060-05 (1-1/2" Door Thickness) for other RC add $ 8.50 4060-06 (1-3/4" Door Thickness) 4060-07 (2" Door Thickness)

4070 Deadlock 313, 335, 628 0.75 lb. $ 148.00 7/8", 31/32" or 1-1/8" backset.

4073 Deadlock – less faceplate. $ 141.00

Order code: 4072-26-628 A B C D

A – Faceplate Shape: 0 – Flat 1 – Radius 2 – Bevel B – Backset: 1 –7/8" 2 – 31/32" 3 – 1-1/8" C – Door Hand: 5 – LH or RHR 6 – RH or LHR 0 – Non-handed (any flat or radius face) D – Finish: 313, 335, or 628

4170 Trim Strike 313, 335, 628 0.20 lb. $ 16.00


17



2190 Series Complete Deadbolt/Deadlatch Package 10B, 32D 8.5 lb. $ 540.00 with Heavy-Duty Exterior Trim Set US3, US4, US32 8.5 lb. $ 550.00 Packed with lockset, adaptable faceplates,

strike (Option 1 or 2), and lever set w/ "Standard Series" lever styles (-01, -02, -03). Retail Packaging.

Complete Deadbolt/Deadlatch Package 10B, 32D 8 lb. $ 448.00 with Small-format Trim Set US3, US4, US32 8 lb. $ 458.00 Packed with lockset, adaptable faceplates,


** 630 Standard. Dark bronze/black strike to match 121, 119 add $ 6.20 selected faceplate finish

Options Extended Lip Strike* — (Option 3 & 4) add $ 14.00

Designer Series Levers — MD through MW N/A .25 lb. add $ 40.00

Electrified Exterior Lever Option (for Heavy duty trim set only!) 12-24 VAC/VDC for access control interface. N/A add $ 146.00

Order code: 2190-311-000-10BFEDCBA

A – Backset: 3 – 1-1/8" 4 – 1-1/2" B – Strike: 1 – Standard Flat 2 – Radius Strike 3 – Flat/centerhung 4" 4 – Flat/centerhung 4.5" 0 – None C – Faceplate Finish: 1 – 628 2 – 313 3 – 335 D – Trim: 0 – None 1 – w/Exterior Trim Set 2 – w/Electrified 3 –Small-format Trim Exterior Trim Set (Not Available Electrified) E – Handle Designation: 00 – No Handle Standard Series: 01 – Curve 02 – Round 03 – Square Designer Series: MD MJ ME MN (Handed) MG MV MI MW F – Trim and Handle Finish: 03 – Bright Brass (US3/605) 04 – Satin Brass (US4/606) 09 – Bright Bronze (US9/611)*** 10 – Satin Bronze (US10/612) 10B – Dark Bronze (US10B/121P) 32 – Bright Stainless (US32/629) 32D – Satin Stainless (US32D/630)


DEADLOCKS, LATCHES, HANDLES AND STRIKES

Standard Handles

Designer Handles

01

MV

MG

MD

ME

MN

MW

MJ

MI

02

03

For Aluminum Entrance Systems

* Custom length extended-lip strikes available on special order.** The strike plates are finished to coordinate with the faceplate finish specified.

*** US9 Bright Bronze and US10 Satin Bronze available on special order only. Call for quote.

18




2190 Series Boxed Lock — (less lever trim package) 628 2.5 lb. $ 252.00 Packed with adjustable faceplates and choice 313, 335 $ 258.20 of strike (Option 1 or 2).

2101-01 Strike, Standard flat with dust box — Stainless 630 .25 lb. $ 23.00 for RC121 (Dark Bronze) or RC119 (Black) 121, 119 $ 29.20

2101-XX* Strike, With extended lip — specify lip length, dim. "A" 630 .25 lb. $ 37.00 for RC121 (Dark Bronze) or RC119 (Black) 121, 119 $ 43.20

2101-02 Strike, Radius with dust box — Stainless 630 .25 lb. $ 23.00 for RC121 (Dark Bronze) or RC119 (Black) 121, 119 $ 29.20

2102-01 Retrofit Strike, Extended height (7-5/8") 630 .25 lb. $ 33.00 with dust box — Stainless. Covers MS+1890 Strike preparation (modified) for RC121 (Dark Bronze) or RC119 (Black) 121, 119 $ 39.20

EK-2190 Electrification Kit — 12-24 VAC/VDC. N/A .25 lb. $ 126.00 Upgrade an existing exterior lever for access control interface. (for Heavy-duty trim set only!)

2190 Thick Door Kits For 2190s with Heavy-Duty Exterior Lever Sets .1 lb. $35.00 2190-TDK-XX – Includes the parts needed to adapt the two heavy-duty exterior lever sets. Specify door thickness. For 2190s with Small-format Levers Sets .1 lb. $16.00 TDK-4600-XX – Includes the parts needed to adapt two small-format levers. Specify door thickness.

* Custom length extended-lip strikes available on special order.

19




2290 Series Complete Deadbolt/Deadlatch Package 10B, 32D 8.5 lb. $ 555.00 with Heavy-Duty Exterior-Use Trim Set US3, US4, US32 8.5 lb. $ 565.00 Packed with lockset, adaptable faceplates,


Complete Deadbolt/Deadlatch Package 10B, 32D 8 lb. $ 463.00 with Small-format Trim Set US3, US4, US32 8 lb. $ 473.00 Packed with lockset, adaptable faceplates,


* 630 Standard. Dark bronze, black or brass strike 121, 119, US3-Powdercoat add $ 6.20 to match selected faceplate finish

Options Designer Series Levers — MD through MW N/A .25 lb. add $ 40.00

Electrified Exterior Lever Option (for Heavy duty trim set only!) 12-24 VAC/VDC for access control interface. N/A add $ 146.00

Order code: 2290-311-000-10BFEDCBA

A – Backset: 3 – 1-1/8" 4 – 1-1/2" B – Strike: 1 – Standard Flat 0 – None C – Faceplate Finish: 0 – US to Match Trim Finish 1 – 628 2 – 313 3 – 335 D – Trim: 0 – None 1 – w/Exterior Trim Set 2 – w/Electrified 3 –Small-format Trim Exterior Trim Set (Not Available Electrified) 4 – Small Format Set w/(Rx) Switch E – Handle Designation: 00 – No Handle Standard Series: 01 – Curve 02 – Round 03 – Square Designer Series: MD MJ ME MN (Handed) MG MV (Handed) MI MW F – Trim and Handle Finish: 03 – Bright Brass (US3/605) 04 – Satin Brass (US4/606) 09 – Bright Bronze (US9/611)** 10 – Satin Bronze (US10/612) 10B – Dark Bronze (US10B/121P) 32 – Bright Stainless (US32/629) 32D – Satin Stainless (US32D/630)

For Stile and Rail Wood and Steel Doors

* The strike plates are finished to coordinate with the faceplate finish specified.** US9 Bright Bronze and US10 Satin Bronze available on special order only. Call for quote.

Standard Handles

Designer Handles

01

MV

MG

MD

ME

MN

MW

MJ

MI

02

03

20




2290 Series Boxed Lock — (less lever trim) 628 2.5 lb. $ 252.00 Packed with adjustable faceplate and 313, 335 $ 258.20 standard strike. 32D $ 267.00 US3, US4, US32 $ 277.00

2206-01 Strike, Standard flat with dust box — Stainless 630 .25 lb. $ 23.00 for RC121 (Dark Bronze), RC119 (Black), or 121, 119, PC-7 $ 29.20 PC-7 (Brass)

2206-XX* Extended Lip Strike, Specify dimension from NA add $ 18.00 strike centerline to frame face.

EK-2190 Electrification Kit — 12-24 VAC/VDC. N/A .25 lb. $ 126.00 Upgrade an existing exterior lever for access control interface. (for Heavy-duty exterior trim set only!)

2290 Thick Door Kits For 2290s with Heavy-Duty Exterior Lever Sets .1 lb. $35.00 2190-TDK-XX – Includes the parts needed to adapt the two heavy-duty exterior lever sets. Specify door thickness. For 2290s with Small-format Levers Sets .1 lb. $16.00 TDK-4600-XX – Includes the parts needed to adapt two small-format levers. Specify door thickness.

* Custom length extended-lip strikes available on special order.

21



LATCHES, HANDLES AND STRIKES

4900 Series Heavy Duty Deadlatch* 628 1.25 lb. $ 96.50 1-1/8" and 1-1/2" backset. 313, 335 1.25 lb. $ 102.50 Specify handing. Packed with standard lip strike. Plated faceplate (strike stainless). US4, US26D $ 117.00 US3, US26 $ 119.00 Order code: 4900-35-201-628

A B C D E A – Backset 2 – 31/32" 3 – 1-1/8" 4 – 1-1/2" B – Handing: 5 – LH or RHR 6 – RH or LHR Field Reversible C – Strike Size: 1 – 4.63" (4901)** 2 – 2.63" (4902) D – Strike Shape/: 01 – Flat/Standard Jamb 02 – Radius Standard Stile Lip Length: 17 – Flat Center-hung 4" jamb 21 –Flat Center-hung 4.5" jamb XX – Other lip lengths E – Finish: 313, 335, or 628. For other available finishes, contact factory.

4913-IB Heavy Duty Deadlatch N/A 1lb. $ 74.70 31/32", 1-1/8" and 1-1/2" backsets without faceplate or strike. Adjustable bevel. Individually boxed.

4911W Heavy Duty Deadlatch 628 1.25 lb. $ 98.50 31/32", 1-1/8" and 1-1/2" backsets. Includes 313, 335 $ 104.50 weatherseal radius faceplate and strike. Adjustable bevel.

4920 ANSI Heavy Duty Deadlatch – with ANSI size faceplate 628 1.5 lb. $ 119.00 Series 1-1/2" and 2-3/4" backsets. Includes flat 313, 335 $ 125.00 faceplate and 4506 strike. Adjustable bevel. US4, US26D 1.5 lb. $ 138.00 US3, US26 1.5 lb. $ 141.00

4923 AN-IB Heavy Duty Deadlatch – same as 4920 ANSI, N/A 1.5 lb. $ 83.70 without faceplate and strike.

4920 ANSI

*See previous page for extended lip strike prices.**Used for MS1850 Strike Retrofit

22




4510 Standard Duty Deadlatch* – with 7/8", 628 1.25 lb. $ 68.80 31/32", 1-1/8" and 1-1/2" backsets. 313, 335 $ 74.80 Includes faceplate and strike. With weatherseal faceplate add $ 1.70

4513-IB Standard Duty Deadlatch – with 7/8", 31/32", N/A 1.25 lb. $ 51.50 1-1/8" and 1-1/2" backsets. Without faceplate and strike. Individually boxed.

4530 Standard Duty Deadlatch* - 1-1/4" x 7-3/8" 628 1.25 lb. $ 86.10 faceplate with 7/8", 31/32", and 313, 335 $ 92.10 1-1/8" backsets. Includes strike.

Order code: 4510-36-101-628 A B C D E F

A – Face Shape: 0 – Flat 1 – Radius 2 –Bevel 1W – Radius w/weatherseal B – Backset: 1 – 7/8" 2 – 31/32" 3 – 1-1/8" 4 – 1-1/2" C – Door Hand: 5 – LH or RHR 6 – RH or LHR D – Strike Size: 1 – 4.63" (4901)** 2 – 2.63" (4902) (see page SW-32) E – Strike Shape/ 01 – Flat/Standard Jamb 02 – Radius Standard Stile Lip Length: 17 – Flat Center-hung 4" jamb 21 –Flat Center-hung 4.5" jamb XX – Other lip lengths F – Finish: 313, 335, or 628

4300 Series eLatch Electrified Deadlatch Packed with adjustable faceplates and choice of 4901 628 1.0 lb. $ 375.00 (standard lip length) or 4304 strike. Individually boxed. 313, 335 $ 381.00

*4304 Strike – surface mount, stainless. 630 0.25 lb. $ 16.10 . RC121 or RC119 $ 22.30

4901-01 Strike – flush mount, mortised with dust box, stainless. 630 0.25 lb. $ 12.80 RC121 or RC119 $ 19.00

4901-02 Strike – radius with dust box, stainless. 630 0.25 lb. $ 12.80 RC121 or RC119 $19.00

4901-XX Strike – with extended lip. 630 0.25 lb. $ 25.40 Specify lip length, dim. A. RC121 or RC119 $ 31.60

Monitoring – "Secure" Indicator – SPDT $ 54.00

*4304 strike is not available with extended lip and radius options. See page 23 for extended lip strike prices.Standard units are non-handed, and operate on 12VDC or 24VDC. 16VDC power requires voltage adapter (VA7400-16VDC). Lever handles, paddles, cylinders, and door loop sold separately.

4530

4510

**Used for MS1850 Strike Retrofit

4300

23




Order code: 4300-3M-201-628 A B C D E

A – Backset: 2 – 31/32" 3 – 1-1/8" 4 – 1-1/2" B – Monitoring: 0 – None M – Monitored C – Strike: 1 – 4304 Surface Mounted 2 – 4901 Mortised 4-5/8" D – Strike shape/ 01 – Flat/Standard Jamb 02 – Radius/Standard Stiles Lip Length: 17 – Flat Center-hung 4" Jamb 21 – Flat Center-hung 4-1/2" Jamb XX – Other Lip Lengths E – Finish 313, 335, or 628

Lever handles, paddles, cylinders, and door loop sold separately.

4901-01 Series Box Strike 630 0.25 lb. $ 12.80 RC119 or RC121 $ 19.00

4901-xx Long Lip Box Strike – With extended lip. 630 0.25 lb. $ 27.90 Specify lip length, dim. A. RC119 or RC121 $ 34.10

4901-02 Radius – with dust box and mounting plate. 630 0.25 lb. $ 12.80 RC119 or RC121 $ 19.00

4902-01 Series Box Strike 630 0.2 lb. $ 12.80 RC119 or RC121 $ 19.00

4902-xx Long Lip Box Strike – specify lip length, dim. A. 630 0.25 lb. $ 27.90 RC119 or RC121 $ 34.10

4902-02 Short Type Box Strike 630 0.2 lb. $ 12.80 Radius, with dust box and mounting plate. RC119 or RC121 $ 19.00

See chart on catalog page SW26 for long-lip strikes for center-hung doors.

4506 Strike – for 4920 ANSI Latch. 630 0.2 lb. $ 26.60 RC119 or RC121 $ 32.60

4781 Two-Point Latch – with paddle. 313, 335, 628 5 lb. $ 286.00 Includes dogging feature. For plated paddle (black escutcheon) US4, US26D $ 363.00 For plated paddle (black escutcheon) US3, US26 $ 371.00

Order code: 4781-021-628 A B

A – Operation: 02 – Push to left 04 – Push to right B – Finish: 313, 335, 628, US3, or US26

Order separately if required: 8650 Cylinder Pad (Mortise Cylinder required) 4036 Mortise Cylinder 8655 Tall Door Kit for doors over 8' or 3080 Series entry trim (Mortise Cylinder required)

sw 4568

sw 4568

24




4568 Lever Handle – for 4700, 4500, 4900 latches. RC119, RC121, RC130 0.5 lb. $ 55.80 For doors 1-3/4" to 2" thick. For doors over 2" to 3-1/4" thick specify thickness add $ 13.70

4568-11 Lever Handle – for MS+1890 Series doors. RC119, RC121, RC130 0.5 lb. $ 42.80 For doors 1-3/4" thick. For doors over 1-3/4" to 2-1/2" thick specify thickness add $ 2.90

4569 Lever Handle – with end return for RC119, RC121, RC130 0.5 lb. $ 62.40 4700, 4500, 4900 latches. For doors 1-3/4" to 2" thick. For doors over 2" to 3-1/4" thick specify thickness add $ 13.70

4569-11 Lever Handle – with end return for RC119, RC121, RC130 0.5 lb. $ 49.40 MS+1890 Series doors. For doors over 1-3/4" to 2-1/2" thick specify thickness add $ 2.90

Order code: 4568-501-121 A B C D

A – Lever Shape: 8 – Straight 9 – Return End B – Door Hand: 5 – LH or LHR 6 – RH or RHR 0 – Non-handed or MS+1890 Assuming handle on interior of door C – Door Thickness: 01 – 1-3/4" to 2" 02 – 2-1/4" to 2-1/2" for 4300, 4500, 03 – 2-3/4" to 3" 04 – 3-3/4" 4900: Door Thickness 11 – 1-3/4" 12 – 2" to 2-1/4" for MS+1890: 13 – 2-1/2" to 2-3/4" 14 – 3" D – Finish: RC119, RC121, or RC130.

91-0128-02 Thick Door Kits – for 4568 and 4569. $ 13.70 through -04

26-0203-02 Thick Door Kits – for 4568-11 and 4569-11. $ 2.90 through -04

4560 Lever Handle RC119, RC121, RC130 .5 lb. $ 44.00

4565 Turn Lever RC119, RC121, RC130 .5 lb. $ 44.00 For doors from 2-1/4" to 3" (4560, 4565), specify thickness add $ 19.70

Order code: 4560-501-130 A

A – Door Hand: 5 – LH or LHR 6 – RH or RHR Assuming handle on interior of door

25



LATCHES, HANDLES, AND STRIKES

4580 Cam Disc – included with lever handles. N/A 0.2 lb. $ 13.00 For doors thicker than 2", specify thickness, add $ 4.20

4590-01 Paddle Operator – for 4900 and 4500 latches. 313, 335, 628 1.5 lb. $ 91.80 through -04 For doors thicker than 1-3/4" specify thickness add $ 19.90

4590-11 Paddle Operator – for MS+1890. 313, 335, 628 1.25 lb. $ 78.80 through -14 For doors thicker than 1-3/4" specify thickness add $ 14.70

Order code: 4590-02-01-313 A B C

A – Operation for 01 – Pull to left 02 – Push to left 4500, 4900: 03 – Pull to right 04 – Push to right A – Operation for 11 – Pull to left 12 – Push to left MS+1890: 13 – Pull to right 14 – Push to right B – Door Thickness 00 – 1-3/4" 01 – 1-13/16 to 2" 02 – 2-1/4" to 2-1/2" 03 – 2-3/4" to 3" 04 – 3-1/4" C – Finish: 313, 335, or 628

4591 Paddle Operator – ergonomic design. Works with all backset 4900 and 4500 latches (except 7/8"). Standard paddle includes dogging feature. Monitoring kit can be field installed. Field changeable function and hand.

4591-01 Paddle Operator – for 4900 latches. 313, 335, 628 2 lb. $ 107.50 through -04 For doors thicker than 1-3/4" specify thickness add $ 19.90

4591-11 Paddle Operator – for MS+1890. 313, 335, 628 2 lb. $ 94.50 through -14 For doors thicker than 1-3/4" specify thickness add $ 14.70

Order code: 4591-02-01-313 A B C

A – Operation for 01 – Pull to left 02 – Push to left 4500, 4900: 03 – Pull to right 04 – Push to right A – Operation for 11 – Pull to left 12 – Push to left MS+1890: 13 – Pull to right 14 – Push to right B – Door Thickness 00 – 1-3/4" 01 – 1-13/16 to 2" 02 – 2-1/4" to 2-1/2" 03 – 2-3/4" to 3" 04 – 3-1/4" C – Finish: 313, 335, or 628

4591MA Active Paddle – Latch activator with monitor switch. add $ 102.00

4591M Paddle with Switch – no latch activator. add $ 89.00

91-0914 Monitor Switch Kit – for field installation (4591 only). $ 96.00

Special Finishes Plated Paddle – black escutcheon. US4, US26D add $ 75.00 Plated Paddle – black escutcheon. US3, US26 add $ 83.00

26



LATCHES, HANDLES, AND STRIKES

4600 Series Lever Operator - 4600/4900/4300 Deadlatches. (For Deadlatches) Choice of "Standard Series" handles (-01,-02,-03). 10B, 32D 1.2 lb. $ 109.00 Includes one lever operator and 4581 universal US3, US4, US32 1.2 lb. $ 119.00 cam plug.

4600 Series Lever Operator - for 2190-2290 narrow backset 10B, 32D 1.2 lb. $ 94.10(For 2190/2290) locksets. Includes one lever with a choice of "Standard US3, US4, US32 1.2 lb. $ 104.00 Series" handles (-01,-02,-03). 4600-MX* Designer Series Levers – Factory installed, Shown above N/A add $ 20.00 MD through MW.

REX Switch "M" Request to Exit – Factory installed, form "C" N/A N/A add $ 36.00 switch to indicate when lever is actuated.

Thick Door Thick Door – Factory installed, for doors from 2" N/A N/A add $ 16.00 to 2-7/8".

Anti-Microbial Anti-Microbial– Factory installed, Germ resistant N/A N/A add $ 50.00 coating applied to specified finish of lever and escutcheon.

REX-4600 Request to Exit Kit – Form "C" switch to indicate N/A .1 lb. $ 31.00 when lever is actuated.

DTK-4600 Fixed Lever (Dummy) Kit – Changes 4600 from N/A .1 lb. $ 8.40 active to dummy (rigid) lever function.

TDK-4600-XX** Thick Door Kit – For doors from 2" to 2-7/8" N/A .1 lb. $ 16.00

TBK-4600-XX** Thru-bolt Mounting Kit – For back-to-back mounting N/A .1 lb. $ 21.00 on wood doors. Includes drive spindles to suit the door thickness specified. *Specify lever style **Specify door thickness

Order code: 4600M-01-511-32D-A A B C D E F G

A – REX Switch M – REX Switch (optional) – – None B – Handle Designation 01 – Curve 02 – Round 03 – Square MD ME MG MI MJ MN†† MV†† MW C – Handing† 5 – LH or LHR 6 – RH or RHR D – Door Thickness 1 – 1-3/4"- 1-7/8" 2 – 2"- 2-1/8" 3 – 2-1/4"- 2-3/8" 4 – 2-1/2"- 2-5/8" 5 – 2-3/4"- 2-7/8" E – Device 1 – 2190 2 – 4300/4500/4700/4900 F – Trim/Handle Finish 03 – Bright Brass 04 – Satin Brass*** 09 – Bright Bronze 10 – Satin Bronze 10B – Dark Bronze*** 32 – Bright Stainless 32D – Satin Stainless G – Anti-Microbial A

***US9 bright bronze; US10 satin bronze available on special order only. †Assuming handle on interior of door ††MN, MV handles are not field reversible

InstalledOptions

KittedOptions

27




4581-01 Universal Cam Disc – Non-handed N/A .2 lb. $ 20.10 for 1-3/4" door thickness. (Included with 4600) For doors thicker than 1-3/4" (specify thickness) add $ 4.20

3090 -01 EFORCE-150 KEYLESS ENTRY – for Satin Chrome 626, 5.5 lb. $ 585.00 Adams Rite Latches and Exit Devices. For Doors 1-3/4" to 2-1/4" thick. Dark Bronze 121 Exterior locking trim. 31/32 backsets and greater. Non-handed. 3090 -02 EFORCE-150 KEYLESS ENTRY – for Satin Chrome 626, 5.5 lb. $ 596.00 Adams Rite MS Deadbolts. For Doors 1-3/4" to 2-1/4" thick. Dark Bronze 121 Exterior locking trim. 31/32 backsets and greater. Non-handed.

RSK-3090 Remote Switch Input Connector. Enables switch N/A .1 lb. $ 12.00 to activate 3090 with momentary closure.

Order code: 3090-01-626A B

A – For use with: 01 – Adams Rite Latches and Exit Devices 02 – Adams Rite MS Deadbolts B – Finish: 626 or 121

3090P-01 EFORCE 125 KHZ PROX – for 626 / 121 6 lb. $ 815.00 Adams Rite Latches (4500, 4900) & 8000 Series Exit Devices

3090P-02 EFORCE 125 KHZ PROX – for 626 / 121 6 lb. $ 825.00 Adams Rite Deadbolts (MS1850, MS1950 Series)

3090C-01 EFORCE iCLASS 13.56 MHZ – for 626 / 121 6 lb. $ 849.00 Adams Rite Latches (4500, 4900) & 8000 Series Exit Devices

3090C-02 EFORCE iCLASS 13.56 MHZ – for 626 / 121 6 lb. $ 869.00 Adams Rite Deadbolts (MS1850, MS1950 Series)

3090-CABLE 15' Cable Extension (ElectroLynx™ X pigtail) — N/A .2 lb. $ 27.00 for 3090P & 3090C

3090-CABLE-EL 15' Cable Extension (ElectroLynx™ X ElectroLynx™) — N/A .2 lb. $ 33.00 for 3090P & 3090C

Order code: 3090P-01-626A B C

A – Model: 3090P – 125 KHz Prox 3090C – 13.56 MHz iCLASS B – For use with: 01 – Adams Rite Latches & Exit Devices 02 – Adams Rite MS Deadbolts C – Finish: 626 or 121

28



PIVOTS

B1900

B1921

Series Reinforcing Pivots

Full Surface1/2" to center line of 4" hinge. Pin uses small pin and bushing. (Non-Handed)

Zinc Plated (US2G) 7 gauge (0.188") Steel

$ 74.00

B1923 Full Surface3/4" to center line of 4-1/2" hinge. Pin uses large pin and bushing. (Non-Handed)

Zinc Plated (US2G) 7 gauge (0.188") Steel

$ 61.00

Includes:

29



ELECTRIC STRIKES

Electric Releases for Use with Adams Rite Series Deadlatches or Cylindrical Latches

7100 For Aluminum Jambs – equal to 7800 and 7840. 313, 335, 628 1.5 lb. $ 168.00 626 1.5 lb. $ 191.00

7101 For Radius Aluminum Stiles – equal to 7801. 313, 335, 628 1.5 lb. $ 168.00

7130 For Aluminum Jambs Pre-Cut 313, 335, 628 1.5 lb. $ 173.00 for MS Lock strike – equal to 7830.7131 For Radius Aluminum Stiles Pre-Cut 313, 335, 628 1.5 lb. $ 173.00

for MS Lock strike – equal to 7831.

7110 For Wood Jambs – equal to 7810 with 652 1.5 lb. $ 200.00 7-15/16" faceplate.

7111 For Wood Jambs, Long Faceplate 652 1.5 lb. $ 202.00Equal to 7810LC with 10-1/4" faceplate.

7140 ANSI size for Hollow Metal and Wood Jambs 313, 335, 628 1.5 lb. $ 168.00Equal to 7820AN, 7840AN and 7850. 626 1.5 lb. $ 191.00

Electric Releases for Use with Mortise Latches by Other Manufacturers

7160 For Aluminum Jambs – equal to 7860 313, 335, 628 1.5 lb. $ 210.00 626 1.5 lb. $ 233.00

7170 For Hollow Metal and Wood Jambs 313, 335, 628 1.5 lb. $ 210.00Equal to 7870. 626 1.5 lb. $ 233.00

Order code: 71xx-315-628-00 A B C D E F

A – Model Number B – Voltage: 3 – 12 volt 4 – 16 volt 5 – 24 volt C – Current and 1 – DC Continuous or Intermittent Duty: 4 – AC Intermittent D – Features: 0 – Standard – Fail Secure 5 – Fail Safe E – Finish: 313 335 626 628 652

F – Lip Extension*: 00 – 1.06" or less 50 – 1.375" 01 – 1.5" 02 – 1.63" 03 – 1.75" 04 – 1.88" 05 – 2" 06 – 2.13" 07 – 2.25" 08 – 2.38" 09 – 2.5" 10 – 2.63" 11 – 2.75 12 – 2.88" 13 – 3" *Door centerline to jamb edge.

es 7170

7170

es 7140

7140

es 7100

7100

30



ELECTRIC STRIKES

7100 Electric Strike Component ProgramElectric strikes can now be ordered as separate body and faceplate kits.Faceplace kits contain all hardware to mount electric strikes.One body kit matched with one faceplate kit makes a complete electric strike.

Body Kits Select body kit, voltage and duty, i.e., 7103A-510.

7103A For Use with Faceplate Kit: FPK00 1.5 lb. $ 140.00 FPK01 FPK10 FPK11 FPK30 FPK31 FPK40

7173A For Use with Faceplate Kit: FPK00 1.5 lb. $ 181.00

Faceplate Kits Select faceplate kit and finish, i.e., FPK00-628.

FPK00 For Use with Body Kits – 7103A, 7173A 313, 335, 628 0.25 lb. $ 28.00 26D 0.25 lb. $ 47.40 US3 0.25 lb. $ 50.10

FPK01 For Use with Body Kit – 7103A 313, 335, 628 0.25 lb. $ 28.00

FPK10 For Use with Body Kits – 7103A 652 0.25 lb. $ 59.70 US3 0.25 lb. $ 82.40

FPK11 For Use with Body Kits – 7103A, 7173A 652 0.25 lb. $ 62.40 US3 0.25 lb. $ 85.00

FPK30 For Use with Body Kits – 7103A 313, 335, 628 0.25 lb. $ 31.80 313, 335, 628 0.25 lb. $ 31.80

FPK31 For Use with Body Kit – 7103A, 7173A 313, 335, 628 0.25 lb. $ 31.80

FPK40 For Use with Body Kits – 7103A 313, 335, 628 0.25 lb. $ 28.00 26D 0.25 lb. $ 47.40 US3 0.25 lb. $ 50.10

FPK45 For Use with Body Kits – 7103A 313, 335, 628 0.25 lb. $ 31.60 4901, 4501 Strike cover up. For installing electric strike in previous prep.

31



ELECTRIC STRIKES

7200 SERIES – FIRE-RATED ELECTRIC STRIKES

7240 For Fire-Rated Cylindrical Latches 630 2.5 lb. $ 310.00

7270 For Fire-Rated Mortise Latches 630 2.5 lb. $ 354.00

-50 Lip Extension for Interior Frame Systems add $ 28.80Timely, Rediframe and similar.

Monitoring Signal Switches – Dual Switches to Monitor Latchbolt & Locking Cam. add $ 90.00

Order code: 72xx-319-630-00 A B C D E F

A – Model: 7240, 7270 B – Voltage: 3 – 12 volt 4 – 16 volt 5 – 24 volt C – Current and 1 – DC Continuous or Intermittent Duty: 4 – AC Intermittent D – Features: 0 – Standard – Fail Secure 9 – Monitor – Fail Secure E – Finish: 630 F – Lip Extension*: 00 – 1.06" or less 50 – 1.375" *Door centerline to jamb edge.

Fire-Rated strikes must be Fail Secure only!

OPTIONS FOR 7100 SERIES ELECTRIC STRIKES

Lip Extensions up to 3" – for center-hung or non-flush doors. add $ 28.80

Lip Extension Kits for Field Modification of 7100 Electric Strikes

91-0171-01 For Use with 7100 through 7140 0.2 lb. $ 28.80 through -13

91-0172-01 For Use with 7160 and 7170 0.2 lb. $ 28.80 through -13

91-0171-50 For 7100 through 7140 in Interior Framing Systems 0.2 lb. $ 28.80Timely, Rediframe and similar systems.

91-0172-50 For 7160 and 7170 in Interior Framing Systems 0.2 lb. $ 28.80Timely, Rediframe and similar systems.

7240

32



ELECTRIC STRIKES

7100 SERIES - OPTIONS AND ACCESSORIES

PS-1 Power Supply– 12/24 VDC Boxed P/S (1 AMP) $ 273.00

4603 Rectifier 0.125 lb. $ 11.70

4605 Transformer – 115 VAC to 12 VAC/24 VAC. 1.5 lb. $ 47.60

4606 Plug-In Transformer – 115 VAC to 24 VAC only. 1.5 lb. $ 78.00

4612-1 Wire Transfer – 105º swing. 1 lb. $ 146.004612-2 Wire Transfer – 180º swing. 1 lb. $ 190.004612-1-SC Wire Transfer – Swing Clear 90º swing. 1.5 lb. $ 254.00

29-0218 Piezo Electric Horn .25 lb. $ 16.50

7400 SERIES – ULTRALINE ELECTRIC STRIKES Electric Releases for use with Adams Rite Key-in-Lever/Cylindrical or Narrow Stile Latches

7400 For Radius Jambs 313, 335, 628 1.5 lb. $ 219.00 606, 630 1.5 lb. $ 242.00 605, 629 1.5 lb. $ 245.00 611, 612 1.5 lb. $ 253.00

7401 For Radius Aluminum Stiles 119, 121, 130 1.5 lb. $ 219.00

7410 For Wood Jambs 313, 335, 628 1.5 lb. $ 242.00 630 1.5 lb. $ 268.00

7411 For Wood Jambs 313, 335, 628 1.5 lb. $ 252.00 630 1.5 lb. $ 268.00

7430 For Aluminum Jambs 313, 335, 628 1.5 lb. $ 224.00

7431 For Aluminum Stiles 119, 121, 130 1.5 lb. $ 224.00

7440 For Steel/Wood/Jambs/Doors 313, 335, 628 1.5 lb. $ 219.00 606, 630 1.5 lb. $ 242.00 605, 629 1.5 lb. $ 245.00 611, 612 1.5 lb. $ 253.00

7400

7410

7430

7440

33



ELECTRIC STRIKES

74RI

74R2

ELECTRIC RELEASES FOR RIM DEVICES

74R1 For use with Rim Type Exit Devices with 3/4" Latch bolt 119, 121, 130 1.5 lb. $ 297.00

74R2 For use with Narrow Stile Rim Type Exit Devices with 1/2" Latch bolt 119, 121, 130 1.5 lb. $ 297.00

Order code: 7400-M-628 A B C

A – Model Number: 7400, 7401, 7410, 7411, 7430, 7431, 7440, 74R1, 74R2 B – Options – – None A – Modular Pack – Body Kit* M – Monitored (not available on 74R2) C – Finish: 119 – Satin Black 121 – Dark Bronze 130 – Clear Aluminum 313 – Dark Bronze Anodized 335 – Black Anodized 605 – Bright Brass 606 – Satin Brass 611 – Bright Bronze 612 – Satin Bronze 628 – Clear Aluminum Anodized 629 – Bright Stainless 630 – Satin Stainless *Model numbers 7400 and 7401 (see A above) are used for the modular pack body kits. No finish designation is required.

OPTIONS FOR 7400 SERIES ULTRALINE ELECTRIC STRIKES

Monitoring – dual switches (form C) to monitor latch bolt add $ 99.00 engagement and solenoid lock/unlock status.

Lip Extension Kits – for center-hung thick doors that present $ 37.50a jamb reveal when closed.

Order code: LEK7400-01 A B

A – 7400 Lip Extension Kit B – Size Measurement = distance from the vertical C/L of the door in the closed position to the edge of the jamb.

01 – 1-1/2" 50 – 1-3/8" 02 – 1-5/8" 03 – 1-3/4" 04 – 1-7/8" 05 – 2" 06 – 2-1/8" 07 – 2-1/4" 08 – 2-3/8" 09 – 2-1/2" 10 – 2-5/8" 11 – 2-3/4" 12 – 2-7/8" 13 – 3"

16 volt DC Adapter Kit

VA7400-16VDC Required for all 7400 strikes when applying 16 volt DC. $ 16.10

Wood Door Cover Plate

WDC7400 Use when mounting the 7400 Series in the inactive leaf of a wood door $ 10.20 pair in order to simplify the mortising operation.

34



ELECTRIC STRIKES

7400 MODULAR KIT PROGRAM

ElectroLynx™ Adapter

ELX Connects Adams Rite electrified products $ 26.00 to the ElectroLynx™ system.

7400 Body Kits

7400A Standard Body designation – use with faceplate kits: $ 197.00 FPK7400, FPK7410, FPK7411, FPK7430, FPK7440 and FPK7445

7401A Radius Body designation – use with faceplate kits: $ 197.00 FPK7401 and FPK7431

7400 Faceplate Kits Faceplate and mounting hardware are presented in a see-through, easy-hang header pack. Order faceplate kits with the body kits referenced above to make a complete electric strike.

FPK7400 313, 335, 628 0.25 lb. $ 21.90 606, 630 0.25 lb. $ 44.80 605, 629 0.25 lb. $ 47.90 611, 612 0.25 lb. $ 56.20

FPK7401 119, 121, 130 0.25 lb. $ 21.90

FPK7410 313, 335, 628 0.25 lb. $ 44.80 630 0.25 lb. $ 70.80

FPK7411 313, 335, 628 0.25 lb. $ 55.20 630 0.25 lb. $ 81.20

FPK7430 313, 335, 628 0.25 lb. $ 27.10

FPK7431 119, 121, 130 0.25 lb. $ 27.10

FPK7440 313, 335, 628 0.25 lb. $ 21.90 606, 630 0.25 lb. $ 44.80 605, 629 0.25 lb. $ 47.90 611, 612 0.25 lb. $ 56.20

FPK7445 313, 335, 628 0.25 lb. $ 31.20

35



EXIT DEVICES

LIFE-SAFETY LISTED EXIT DEVICES: SERIES 8000

8100 Series Surface Vertical Rod – for wood and 313, 335, 628 10 lb. $ 814.00 hollow metal doors. US4, US32D 12 lb. $ 1,030.00 US3, US32 12 lb. $ 1,236.00

8100T Series Top Rod Only 313, 335, 628 10 lb. $ 742.00 US4, US32D 12 lb. $ 938.00 US3, US32 12 lb. $ 1,113.00

8055 Tall Door Kit – for doors up to 10' tall. 313, 335, 628 2.5 lb. $ 101.00 For 8100 and 8200. US4, US32D 2.5 lb. $ 131.00 US3, US32 2.5 lb. $ 167.00

8200 Series Surface Vertical Rod – for narrow stile 313, 335, 628 10 lb. $ 765.00 glass doors US4, US32D 12 lb. $ 979.00 US3, US32 12 lb. $ 1,185.00

8200T Series Surface Vertical Rod – for narrow stile 313, 335, 628 $ 696.00 glass doors. Top rod only. US4, US32D $ 881.00 US3, US32 $ 1,067.00

Order code: 8222-30-US3 A B C D E

A – Door Type: 1 – Wood or Hollow Metal 2 – Metal Stile Glass B – Vertical Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish C – Pushbar Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish D – Door Opening 30 – 30" 36 – 36" Width: 42 – 42" 48 – 48" E – Add Dash Number for US Finish: US3, US4, US32, US32D.

Order rim type cylinder separately if required. On pairs of doors, specify one-half total exit opening for width.

36



EXIT DEVICES

LIFE-SAFETY LISTED EXIT DEVICES: SERIES 8000 CONT’D

8300 Series Mortise Type – for wood and 313, 335, 628 10.75 lb. $ 612.00 hollow metal single doors. US4, US32D 12.75 lb. $ 920.00 US3, US32 12.75 lb. $ 960.00

8360-xx Long Lip Strike – stainless steel for jambs that US32D 2 lb. $ 52.60 project outward 2-1/4" beyond centerline of door. For 8300 Series only.

Order code: 8312-7148-US3 A B C D E F

A – Faceplate Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish B – Face Shape: 0 – Flat 2 – Bevel C – Door Hand: 7 – RHR 8 – LHR D – Pushbar Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish E – Door Opening 30 – 30" 36 – 36" Width: 42 – 42" 48 – 48" F – Add Dash Number for US Finish: US3, US4, US32, or US32D.

Order mortise cylinder separately if required. Backset 2-3/4" only.

37



EXIT DEVICES


8400 Series Mortise Type - for single leaf aluminum stile glass doors. 313, 335, 628 9.75 lb. $ 557.00 US4, US32D 11.75 lb. $ 813.00 US3, US32 11.75 lb. $ 905.00

8455-01 Optional Long Face Strike US32D 11.75 lb. $ 87.60 for covering previous MS strike prep.

8460-17 Optional Long Lip Strike US32D 11.75 lb. $ 66.00 for jambs that project outward 2-1/4" beyond centerline of door.

Order code: 8412-27136-US3 A B C D E F G

A – Faceplate Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish B – Face Shape: 0 – Flat 1 – Radius 2 – Bevel 4 – Radius with weatherseal C – Backset: 2 – 31/32" 3 – 1-1/8" 4 – 1-1/2" D – Door Hand: 7 – RHR 8 – LHR E – Pushbar Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish F – Door Opening 30 – 30" 36 – 36" Width: 42 – 42" 48 – 48" G – Add Dash Number for US Finish: US3, US4, US32, or US32D. Order cylinder separately if required.

91-0995-02* 2" Thick Door Kit – for 8300 and 8400 Series exit devices. .25 lb. $ 11.40

91-0995-03* 2-1/4" Thick Door Kit – for 8300 and 8400 Series exit devices. .25 lb. $ 13.40



91-0995-06* 3" Thick Door Kit – for 8300 and 8400 Series exit devices. .25 lb. $ 20.20

91-0325-01 Thermal Door Kit – 1/4" Cladding. .5 lb. $ 70.10 For 8400 Series exit devices.

91-0325-02 Thermal Door Kit – 1/2" Cladding. .5 lb. $ 129.00 For 8400 Series exit devices. * Order 8360-XX Long Lip Strike as required.

Driver Shaft

Thermal Clad Spacer

Mortise Spacer

Flat Head Screws

38



EXIT DEVICES


8500 Series Concealed Vertical Rod – for hollow metal doors. 313, 335, 628 8.75 lb. $ 580.00 US4, US32D 10.75 lb. $ 837.00 US3, US32 10.75 lb. $ 889.00

8600 Series Concealed Vertical Rod – for aluminum stile 313, 335, 628 9 lb. $ 546.00 glass doors. US4, US32D 11 lb. $ 819.00 US3, US32 11 lb. $ 857.00

8655 Tall Door Kit – for doors up to 10' tall. 5 lb. $ 45.60 For 8500 and 8600 exit devices

Order code: 8611-30-US3 A B C D E

A – Door Type: 5 – Hollow Metal 6 – Aluminum and Glass B – Door Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish C – Pushbar Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish D – Door Opening 30 – 30" 36 – 36" Width: 42 – 42" 48 – 48" E – Add Dash Number for US Finish: US3, US4, US32, or US32D.

Order mortise cylinder and 8650 cylinder escutcheon separately if required. On pairs of doors, specify one-half total exit opening for width.

39



EXIT DEVICES


8700 Series Rim Type – for wood and hollow metal doors. 313, 335, 628 8.5 lb. $ 401.00 US4, US32D 10.5 lb. $ 624.00 US3, US32 10.5 lb. $ 665.00

8800 Series Rim Type – for aluminum stile glass doors. 313, 335, 628 8.75 lb. $ 386.00 US4, US32D 10.75 lb. $ 602.00 US3, US32 10.75 lb. $ 643.00

Order code: 8703-42-US3 A B C D

A – Door Type: 7 – Wood or Hollow Metal 8 – Narrow Stile Glass B – Pushbar Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish C – Door Opening 30 – 30" 36 – 36" Width: 42 – 42" 48 – 48" D – Add Dash Number for US Finish: US3, US4, US32, or US32D.

Order rim cylinder separately if required.

8900 Series For Wood Doors – semi-concealed top rod only. 313, 335, 628 11 lb. $ 626.00 US4, US32D 13 lb. $ 929.00 US3, US32 13 lb. $ 976.00

8955-01 Tall Door Kit – for doors up to 10' tall. 2 lb. $ 47.40

Modifications Matching End-Caps, plated – order separately. US4, US32D add $ 69.30 Specify exit device type and finish. US3, US32 add $ 86.60

Standard devices are for 30", 36", 42" and 48" openings. Devices can be field cut. Factory cutting charges between 30" and 48" (all exit devices). $ 66.00

For doors thicker than 1-3/4" and/or stile walls thicker than 1/8" (applies to CVR devices) add $ 51.50

US9-US10 available by quotation only (consult factory).

Anti-Microbial Protection add $ 50.00

Consult factory for devices under 30" and above 48".

40



EXIT DEVICES

FIRE-RATED EXIT DEVICES: SERIES 3000

3100 Series Surface Vertical Rod 313, 335, 628 11 lb. $ 1,020.00 US4, US32D 13 lb. $ 1,234.00 US3, US32 13 lb. $ 1,357.00

3055 Tall Door Kit – for doors up to 10' tall. 313, 335, 628 $ 107.00 US4, US32D $ 139.00 US3, US32 $ 174.00

3100T Series For Metal Doors – surface vertical rod. 313, 335, 628 10.5 lb. $ 917.00 Top rod only. US4, US32D 12.5 lb. $ 1,110.00 US3, US32 12.5 lb. $ 1,220.00

3100W Series For Wood Doors – surface vertical rod. 313, 335, 628 10.5 lb. $ 961.00 Top rod only. US4, US32D 12.5 lb. $ 1,103.00 US3, US32 12.5 lb. $ 1,210.00

Order code: 3122T-30-US3 A B C D E

A – Vertical Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish B – Pushbar Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish C – Top Rod Only: T – Hollow Metal Door W – Wood Door D – Door Opening 30 – 30" 36 – 36" Width: 42 – 42" 48 – 48" E – Add Dash Number for US Finish: US3, US4, US32, or US32D.

Order rim cylinder separately if required. On pairs of doors, specify one-half total exit opening for width.

41



EXIT DEVICES

FIRE-RATED EXIT DEVICES: SERIES 3000 CONT’D

3300 Series Mortise Type 313, 335, 628 12.75 lb. $ 925.00 US4, US32D 14.75 lb. $ 1,091.00 US3, US32 14.75 lb. $ 1,172.00

4009-01 Open Back Strike – for 1-3/4" thick doors. 3 lb. $ 121.00

Order code: 3312-7148-US3 A B C D E F

A – Faceplate Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish B – Face Shape: 0 – Flat 2 – Bevel C – Door Hand: 7 – RHR 8 – LHR D – Pushbar Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish E – Door Opening 30 – 30" 36 – 36" Width: 42 – 42" 48 – 48" F – Add Dash Number for US Finish: US3, US4, US32, or US32D.

Order cylinder separately if required. Backset 2-3/4" only.

3600 Series Concealed Vertical Rod – for hollow steel doors. 313, 335, 628 10 lb. $ 977.00 US4, US32D 12 lb. $ 1,169.00 US3, US32 12 lb. $ 1,255.00

3655 Tall Door Kit – for doors taller than 66" above. 0.75 lb. $ 47.40 Bar height, up to 10' doors.

3600T Series Concealed Vertical Rod – top rod only. 313, 335, 628 9.5 lb. $ 854.00 US4, US32D 11.5 lb. $ 1,037.00 US3, US32 11.5 lb. $ 1,138.00

Order code: 3601T-30-US3 A B C D

A – Pushbar Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish B – Top Rod: T – Top Rod Only C – Door Opening 30 – 30" 36 – 36" Width: 42 – 42" 48 – 48" D – Add Dash Number for US Finish: US3, US4, US32, or US32D.

Order 8650 escutcheon and mortise cylinder separately if required. On pairs of doors, specify one-half total exit opening for width. See 3900 for concealed vertical rod in wood door.

42



EXIT DEVICES

FIRE-RATED EXIT DEVICES: SERIES 3000 CONT’D

3700 Series Rim Type 313, 335, 628 9.5 lb. $ 679.00 US4, US32D 11.5 lb. $ 845.00 US3, US32 11.5 lb. $ 937.00

Order code: 3703-42-US3 A B C

A – Pushbar Finish: 1 – 628 2 – 313 3 – 335 0 – US Finish B – Door Opening 30 – 30" 36 – 36" Width: 42 – 42" 48 – 48" C – Add Dash Number for US Finish: US3, US4, US32, or US32D.

Order cylinder separately if required.

3900 Series Semi-Concealed Top Rod Only – for wood doors. 313, 335, 628 11 lb. $ 1,037.00 US4, US32D 13 lb. $ 1,209.00 US3, US32 13 lb. $ 1,379.00

26-0584-MP Sex Bolts – 2 per bag. (Need 2 Kits per Exit Device) US26D, US3 $ 11.00

ModificationsNote: Standard devices are for 30", 36", 42", and 48" openings.

Devices can be field cut up to 6" (except 30" devices).

For doors thicker than 1-3/4" and/or door skins plus reinforcement thicker than those specified in the Adams Rite Master Reinforcement Sheet template (applies to Concealed Vertical Rod and Mortise devices). add $ 51.50

Cutting charges for non-standard lengths between 30" and 48" add $ 66.00

End Caps – plated to match exit device finish. US4, US32D add $ 69.30 Specify exit device type and finish. US3, US32 add $ 86.60 Order separately.

US9-US10 available by quotation only (consult factory).

Anti-Microbial Protection add $ 50.00

Consult factory for devices under 30" and above 48".

43



TRIM OPTIONS AND ACCESSORIE

Adams Rite - IDN Inchardware.idn-inc.com/.../books/AdamsRitePriceList.pdf · Founded in 1896, Adams...

Documents

Transcript of Adams Rite - IDN Inchardware.idn-inc.com/.../books/AdamsRitePriceList.pdf · Founded in 1896, Adams...