Adams Rite Architectural Hardware - Locksandsafesonline Rite/Price List.pdf · by Adams Rite, the...

60
Adams Rite Architectural Hardware adamsrite.com Prices effective February 1, 2015 2015 PRICE LIST

Transcript of Adams Rite Architectural Hardware - Locksandsafesonline Rite/Price List.pdf · by Adams Rite, the...

  • Adams Rite Architectural Hardware

    adamsrite.com

    Prices effective February 1, 2015

    2015 PRICE LIST

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    3

    Adams RiteArchitectural Hardware2015 PRICE LIST

    Prices effective February 1, 2015

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    4

    Limited Warranty

    Products sold under the Adams Rite brand in the United States of America are warranted free from defects in workmanship and materials under normal use and service.

    This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-Adams Rite products or parts.

    This warranty is void if any modification is made to the product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making the modification.

    Should any defect of manufacture (in material or workmanship) occur in its products, Adams Rite, upon prompt notification and proof to its satisfaction that the product was defective in manufacture for the use intended by Adams Rite, will at its option, exchange the product, repair the product, or refund the price charged by Adams Rite, FOB factory within the stated time frame listed below.

    • All mechanical products for five (5) years from date of manufacture

    • Ultraline 7400 Electric Strikes for five (5) years from date of manufacture

    • All electrical products for three (3) years from date of manufacture, with the exception of the exit devices with the SE option

    • Exit devices with the SE option for one (1) year from date of manufacture. Adams Rite recommends that for optimal performance all exit devices with the SE option are installed and powered using PS-SE power supplies. Installing SE exit devices with PS-SE power supplies extends the warranty to five (5) years from date of manufacture.

    General RMA ProcedureProduct repair or replacement, or associated charges, will not be accepted under this warranty unless prior authorization from Adams Rite has been given. Upon receipt of products returned for repair or replacement, Adams Rite will determine whether products qualify for repair or replacement under this warranty. Adams Rite has no liability to pay any costs of repair performed by anyone other than qualified personnel authorized by Adams Rite prior to the work being done.

    Written notice of a product or component part believed to be defective as covered by this warranty should be sent to Adams Rite, 10027 S. 51st Street, Suite 102, Phoenix, Arizona 85044 or [email protected] and should include your name and address, an identification of the product or component part and a brief description of the defect. Notice of a product or component part believed to be defective as covered by this warranty may also be accepted over the telephone by Adams Rite, 800.872.3267.

    Upon receipt of such notice, if the customer has an account with Adams Rite or a valid credit card, an advance replacement product may be

    ordered whereby Adams Rite will ship a replacement product to the customer free of charge. If Adams Rite does not receive the original defective product from the customer within 60 days, Adams Rite will charge the customer’s account or credit card for the price of the advanced replacement product plus freight costs. Upon inspection of the returned product by Adams Rite, a decision will be made whether or not to charge the customer for the advanced replacement Adams Rite product. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms. Obsolete products will not be accepted for return. Return Material Authorizations (RMAs) will be closed if the goods are not received within 60 days of issuance.

    If Adams Rite receives original defective product from the customer within 60 days of RMA issuance, and if the customer is requesting credit for the defective material, the customer must reference the valid Adams Rite Purchase Order number upon which the product was originally ordered. If the original Purchase Order number is not available, at Adams Rite’s option a credit may be issued at the customer’s current cost. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms.

    Transportation charges and insurance on all returned materials must be prepaid by the purchaser when merchandise is ordered in error. On goods returned for customer convenience, when the purchaser returns materials in compliance with these Terms which are accepted by Adams Rite, the purchaser may be issued a credit for 65% of the purchase price, with 35% charged by Adams Rite for handling and reprocessing. All refunds will be in the form of a credit.

    CancellationAs an industry leader, Adams Rite is committed to maintaining the highest standard of quality and ensuring strict compliance to industry codes. Adams Rite’s proud history of customer service and manufacturing agility allow quick response times to customer’s changing needs, which may include special orders or product modifications. Please be advised that all product modifications require special authorization to ensure the order fully meets customer’s expectations. Customers are asked to allow for an extended lead time on all special orders. Please note that at Adams Rite’s option, product modifications and other special orders cannot be changed, cancelled, or returned once a ship date has been provided on an order acknowledgement by Adams Rite.

    Adams Rite prides itself on introducing new, industry-relevant, feature-rich products. Since new solutions will surpass the capabilities of older product lines, historical products may be subsequently discontinued. Every effort will be made to announce new product introductions as well as product discontinuations in a manner that allows customers advanced notice of these events. Once a product line is discontinued orders will be fulfilled in order of receipt, although Adams Rite cannot guarantee all orders can be filled. Repair services and spare parts for discontinued product lines will be available for some reasonable time period. Adams Rite reserves the right to replace discontinued product with an equivalent product as deemed by Adams Rite.

    LIMITED WARRANTY

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    5LIMITED WARRANTY • GLOSSARY

    THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ADAMS RITE IS A DIVISION OF HANCHETT ENTRY SYSTEMS, INC. HANCHETT ENTRY SYSTEMS, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR

    LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

    Glossary of Terms

    Backset: The horizontal dimension from the front of the faceplate to the center of the cylinder.

    Cam: The part on the back of a cylinder that rotates when the key is turned, and operates the lock mechanism.

    Deadbolt: A lockbolt having no spring action. Usually rectangular and actuated by cylinder or thumbturn.

    Deadlatch: A lock with a radiused or bevelled spring-loaded latchbolt which may be automatically or manually locked against unauthorized retraction and will self latch when the door returns to the closed position.

    Dogging: The means of retaining the lockbolt or exit device mechanism in the open position to allow the door to be free swinging.

    Escutcheon: An ornamental or protective plate that is fixed to the stile of the door and slips over the cylinder, thumbturn, handle or similar.

    Exit Device: A horizontal bar running at least two-thirds of the width of the door leaf, where pressure on the bar releases the locking arrangement.

    Keyed Alike (KA): All cylinders may be operated by the same key.

    Keyed Different (KD): Different keys operate each cylinder or group of cylinders.

    Latchbolt: A bevelled or radius bolt which operates on a spring return so that the lock may self-lock.

    Schoolhouse Function:

    The inside operation of the deadlock is limited to unlocking only. The lock is modified to prevent someone (like a student) from locking up the classroom, usually with a thumbturn, from the inside.

    Solenoid: A device that when energized with electrical current, develops a magnetic pull motion enabling mechanical work to be effected (such as plunger movement that releases the blocking arm on electric strikes).

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    6

    General InformationAdams Rite Limited Warranty/Terms and Conditions ���������������������4-5

    Glossary of Terms ������������������������������������������������� 5

    Table of Contents �������������������������������������������������6-7

    Products

    DEADLOCKS

    RT1050D RITE Touch®Digital Glass Door Lock �������������������������� 8

    1830 Bottom Rail Deadlock(Swingbolt) ��������������������������������� 8

    MS1837 Series MS® Two-Point Deadlock ������������������������������� 8

    MS1847 Series MS® Deadlock ���������������������������������������� 9

    MS1850S Series MS® Deadlock �������������������������������������� 9

    MS1850SN Series MS® Deadlock (ANSI Size) �������������������������� 10

    MS1861 Series MS® Bottom Rail Deadlock ����������������������������� 10

    1875 Two-Point Deadlock ������������������������������������������ 10

    MS+1890 Series MS® Deadlock/Deadlacth ����������������������������� 11

    MS1950 Series MS® Deadlock ��������������������������������������� 11

    2190 Dual Force® Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors �� 12

    2290 Dual Force® Interconnected Deadbolt/Deadlatch for Stile and Rail Wood or Hollow Metal Doors ��������������������������������������������� 13

    2331 Heavy Duty Deadbolt ����������������������������������������� 14

    4070 Series Short Throw Deadbolt (Projection Style) ��������������������� 14

    4189, 4190 Flush Locksets (Including Deadlock) ������������������������ 15

    4430, 4431 Flush Locksets (Including Deadlock) ������������������������ 15

    5017 Wood Door Deadbolt ������������������������������������������ 16

    DEADLATCHES

    4300 Electrified Deadlatch (eLatch) – Steel Hawk ����������������������� 16

    4300 RITE Pack �������������������������������������������������� 16

    4510 Standard Duty Deadlatch �������������������������������������� 17

    4530 Standard Duty Deadlatch �������������������������������������� 17

    4781 Two-Point Deadlatch with Paddle �������������������������������� 18

    4900 Heavy Duty Deadlatch ���������������������������������������� 18

    4920AN Heavy Duty Deadlatch (ANSI Size) ���������������������������� 18

    FLUSHBOLTS & PIVOTS

    1870 Cylinder-Operated Flushbolt ������������������������������������ 19

    1870HM Cylinder-Operated Flushbolt ��������������������������������� 19

    1877 Cylinder-Operated Flushbolt ������������������������������������ 19

    MS1880, MS1881 Two-Point Flushbolts ������������������������������� 20

    MS2180 Auto-Release Two-Point Flushbolt ���������������������������� 20

    B1921, B1923 Reinforcing Pivots ������������������������������������� 20

    EXIT DEVICES

    8099 Dummy Pushbar ��������������������������������������������� 21

    3100, 8100 Surface Vertical Rod Exit Device ��������������������������� 21

    8200 Narrow Stile Surface Vertical Rod Exit Device ��������������������� 22

    3300, 8300 Mortise Exit Device �������������������������������������� 23

    8400 Narrow Stile Mortise Exit Device �������������������������������� 24

    3600, 8500 Metal Door Concealed Vertical Rod Exit Device ��������������� 25

    8600 Narrow Stile Concealed Vertical Rod Exit Device ������������������� 26

    3700, 8700 Rim Exit Device ����������������������������������������� 26

    8800 Narrow Stile Rim Exit Device ����������������������������������� 27

    3900, 8900 Wood Door Concealed Vertical Rod Exit Device ��������������� 27

    ACCESSORIES FOR EXIT DEVICES �������������������������������� 28

    KITTED OPTIONS FOR EXIT DEVICES ������������������������������ 28

    MODIFICATION OPTIONS FOR EXIT DEVICES ����������������������� 28

    ELECTRIC STRIKES

    7100, 7101 Electric Strikes ����������������������������������������� 29

    7110, 7111 Electric Strikes ����������������������������������������� 29

    7130, 7131 Electric Strikes ����������������������������������������� 30

    7140 Electric Strike ����������������������������������������������� 30

    7160 Electric Strike ����������������������������������������������� 31

    7170 Electric Strike ����������������������������������������������� 31

    7100 Series Electric Strikes Components ����������������������������� 32

    7240 Fire-Rated Electric Strike ������������������������������������� 33

    7270 Fire-Rated Electric Strike ������������������������������������� 33

    Ultraline 7400, 7401 Electric Strikes ��������������������������������� 34

    Ultraline 7410, 7411 Electric Strikes ���������������������������������� 34

    Ultraline 7430, 7431 Electric Strikes ��������������������������������� 35

    Ultraline 7440 Electric Strikes �������������������������������������� 35

    Ultraline 74R1 Electric Strikes �������������������������������������� 35

    Ultraline 74R2 Electric Strikes �������������������������������������� 36

    7400 Series Electric Strikes Components ����������������������������� 36

    TRIM

    1000 Series Turns ������������������������������������������������ 37

    3000 Fixed Pull ��������������������������������������������������� 37

    3080 Series Entry Trim ��������������������������������������������� 38

    3090, 3090P/C eForce® Keyless Entry �������������������������������� 39

    A100-3090H Keyless Entry and Aperio® Hub Wholesale Kit ��������������� 39

    4060 Turn ������������������������������������������������������� 40

    4550 MS® Deadlock Lever ������������������������������������������ 40

    4560, 4565 Series Deadlatch Handles for 4300, 4500, 4900 ��������������� 41

    4560-010, 4565-010 Series Deadlatch Handles for MS+1890 ������������� 41

    4568, 4569 Eurostyle Deadlatch Handles ����������������������������� 42

    4568-010, 4569-010 Series Deadlatch Handles for MS+1890 ������������� 42

    TABLE OF CONTENTS

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    7TABLE OF CONTENTS

    4590 Deadlatch Paddle for 4300, 4500, 4900 �������������������������� 43

    4590-1X Deadlatch Paddle for MS+1890, 2190 ������������������������� 43

    4591 Deadlatch Paddle for 4300, 4500, 4900 �������������������������� 44

    4591-1X Deadlatch Paddle for MS+1890, 2190 �������������������������� 44

    4600 Heavy Duty Designer Deadlatch Handle �������������������������� 45

    CYLINDERS

    4024, 4025, 4029 Cylinder Pulls ������������������������������������� 46

    4036 Mortise Cylinder ��������������������������������������������� 46

    MS4043 Cylinder Guard ������������������������������������������� 47

    4066 Thumbturn ������������������������������������������������� 47

    4580 Cam Disc �������������������������������������������������� 47

    4581 Universal Cam Disc ������������������������������������������ 48

    8650 Cylinder Escutcheon Kit ��������������������������������������� 48

    8736 Rim Cylinder ������������������������������������������������ 48

    ACCESSORIES

    2190 Dual Force® Interconnected Deadbolt/Deadlatch Strikes ������������� 49

    2290 Dual Force® Interconnected Deadbolt/Deadlatch Strikes ������������� 49

    4000 Series MS® Deadlock Strikes ����������������������������������� 49

    4014 Two-Point Conversion Kit �������������������������������������� 50

    4015 Threshold Bolt ����������������������������������������������� 50

    4016 Header Bolt ������������������������������������������������� 50

    4085 Header Bolt (Pairs of Doors Only) ������������������������������� 50

    4089 Exit Indicator ������������������������������������������������ 51

    4104 Mounting Bridges ��������������������������������������������� 51

    4800, MS 4804 Series Strikes ��������������������������������������� 51

    4901, 4902 Deadlatch Strikes ��������������������������������������� 52

    91-0965 Universal Mounting Tab Kits for Installing MS® Locks & Latches ����� 52

    THICK DOOR KITS

    2190, 2290 Dual Force® Interconnected Deadbolt/Deadlatch Thick Door Kit �� 53

    4568, 4569 Eurostyle Deadlatch Handles Thick Door Kits ���������������� 53

    FACEPLATES

    MS1850S, MS1850A, MS1950 Deadlocks (Long Throw) Faceplates ��������� 53

    MS1850S, MS1850A, MS1950 Deadlocks (Hookbolt and Short Bolt) Faceplates ��������������������������������������������������������������� 53

    MS1850S Deadlocks Faceplates ������������������������������������� 54

    MS1850SN Deadlocks (Long Throw) Faceplates ������������������������ 54

    MS1850SN Deadlocks (Hookbolt) Faceplates �������������������������� 54

    1870 Flushbolt Faceplates ������������������������������������������ 54

    MS+1890 Deadlock Faceplates �������������������������������������� 55

    2331 Heavy Duty Deadbolt Faceplates �������������������������������� 55

    3300 Fire-Rated Mortise Exit Device Faceplates ������������������������ 55

    4070 Short Throw Deadbolt Faceplates ������������������������������� 55

    4500 Standard Duty Deadlatch Faceplates ����������������������������� 55

    4530 Standard Duty Deadlatch Faceplates ����������������������������� 55

    4900 Heavy Duty Deadlatch Faceplates ������������������������������� 56

    4900 Heavy Duty Deadlatch Special Faceplates ������������������������ 56

    4920, 8300 Faceplates �������������������������������������������� 56

    7100, 7160 Electric Strikes Faceplates �������������������������������� 56

    7101 Electric Strikes Faceplates ������������������������������������� 56

    7110 Electric Strikes Faceplates ������������������������������������� 56

    7111 Electric Strikes Faceplates ������������������������������������� 57

    7130 Electric Strikes Faceplates ������������������������������������� 57

    7131 Electric Strikes Faceplates ������������������������������������� 57

    7140, 7170 Electric Strikes Faceplates �������������������������������� 57

    POWER

    PS-SE Power Supply ���������������������������������������������� 57

    PS-1 Power Supply ������������������������������������������������ 57

    PS-LR Power Supply ���������������������������������������������� 58

    4603, 4605, 4606 Transformer/Rectifier/Plezo Horn ��������������������� 58

    4612 Power Transfer Device ���������������������������������������� 58

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    8

    RT1050D RITE Touch® Digital Glass Door LockMODELS

    RT1050DDigital glass door lock for single or double doors

    $575.00

    RT-5C-1050Extra cards (package of 5 cards)

    $58.00

    HOW TO ORDER Specify quantity and the following information.

    RITE TOUCH MODEL

    RT 1050D1050D For single or double doors

    1830 Bottom Rail Deadlock (Swingbolt)

    sw 1830

    MODEL & FINISHES 313, 628

    183031/32", or 1-1/8" cylinder height

    $129.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. DASH NO. (SPECIFY FOR CYLINDER HEIGHT AND LOCK DEPTH) FINISH

    1830 -02 -62802 Cylinder Height 31/32" Dim. "A" 1-5/8" 628 Clear Anodized

    03 Cylinder Height 1-1/8" Dim. "A" 1-25/32" 313 Dark Bronze Anodized

    MS1837 Series MS® Two-Point Deadlock MODELS & FINISHES 313, 335, 628 605, 626

    MS1837Includes 4001-011 strike, 36" cylinder height

    $229.00 $302.00

    MS1837Includes 4001-011 strike, cylinder height other than 36" (maximum cylinder height 65”)

    $276.00 $352.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FINISH

    MS1837 -313313 Dark Bronze Anodized 626 Satin Chrome

    335 Black Anodized 628 Clear Anodized

    605 Bright Brass

    If cylinder height other than 36” is required, specify exact height from bottom of door to cylinder center.

    DEADLOCKS

    DEADLOCKS

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    9

    MS1847 Series MS® Deadlock/DeadlatchMODEL & FINISH 630

    MS1847Deadlock, stainless steel

    $55.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACE SHAPE, HUB ANGLE, LOCK OR LATCH FINISH

    MS1847 -02 -630(See Configuration table below)

    (Blank) -02 -06

    -09 -10 -11

    -13SELF-

    LATCHING

    SELF-LATCHING

    VERT.

    VERT.

    22.5° 22.5°

    45° 45°

    45°

    630 Satin Stainless

    MS1850S, MS1850S-050 Series MS

    ® Deadlock

    MODELS & BACKSETS 7/8" 31/32", 1-1/8", OR 1-1/2"

    MS1850S Flat faceplate, any handing, 313, 335, or 628 finish, without strike

    $77.00 $65.00

    MS1851S Radius faceplate, any handing, 313, 335, or 628 finish, without strike

    $77.00 $65.00

    MS1851SW Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, without strike

    $79.00 $67.00

    MS1852S Bevel faceplate, any handing, 313, 335, or 628 finish, without strike

    $77.00 $65.00

    Schoolhouse function for above locks add $36.

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE BACKSET BOLT SHAPE HANDING FINISH

    MS185 0S -2 1 0 -6280S Flat 1 7/8" 1 Straight 5 LH or RHR 313 Dark Bronze Anodized

    1S Radius 2 31/32" 5 Hookbolt 6 RH or LHR 335 Black Anodized

    1SW Radius with weatherstrip 3 1-1/8" 0 Non-Handed* 628 Clear Anodized

    2S Bevel 4 1-1/2"

    *Any flat or radius faceplate, except Schoolhouse.

    DEADLOCKS

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    10

    MS1850SN, MS1850SN-050 Series MS

    ® Deadlock (ANSI Size)

    MODELS

    MS1850SNFlat faceplate, any handing, 313, 335, or 628 finish, without strike

    $92.00

    MS1851SNRadius faceplate, any handing, 313, 335, or 628 finish, without strike

    $92.00

    MS1852SNBevel faceplate, any handing, 313, 335, or 628 finish, without strike

    $92.00

    Schoolhouse function add $36.

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE ANSI SIZE BOLT SHAPE HANDING FINISH

    MS185 0 SN -41 0 -6280 Flat 41 Straight 5 LH or RHR 313 Dark Bronze Anodized

    1 Radius 45 Hookbolt 6 RH or LHR 335 Black Anodized

    2 Bevel 0 Non-Handed* 628 Clear Anodized

    *Any flat or radius faceplate, except schoolhouse.

    MS1861 Series MS® Bottom Rail Deadlock

    sw m

    s 1861

    MODELS & FINISH 603

    MS1861-01One-point deadlock, vertical bolt operation only

    $135.00

    MS1861-02Two-point deadlock, horizontal and vertical operation

    $170.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. BOLT OPERATION FINISH PACKAGING

    MS1861 -01 -603 -IB01 Vertical Bolt Only 603 Zinc plated steel IB Individually Boxed

    02 Vertical and Horizontal Bolts

    If tube spacers are required, specify QUANTITY and LENGTH.

    1875 Two Point Deadlock MODEL & FINISH 603

    1875Two-point deadlock

    $166.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. PACKAGING

    1875 -IBIB Individually Boxed

    DEADLOCKS

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    11

    MS+1890 Series MS® Deadlock/DeadlatchMODELS & FINISHES 628, 313, 335

    MS+1890 Flat faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset

    $232.00

    MS+1891Radius faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset

    $232.00

    MS+1891WRadius faceplate with weatherstrip, any handing, 31/32", 1-1/8", or 1-1/2" backset

    $242.00

    MS+1892Bevel faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset

    $232.00

    MODEL

    MS+1893-IBWithout faceplate, without strike

    $199.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE BACKSET STRIKE SHAPE/LIP LENGTH HANDING FINISH

    MS+189 1 -3 02 6 -6280 Flat 2 31/32" 01 Flat/Standard Jamb 5 LH or RHR 313 Dark Bronze Anodized

    1 Radius 3 1-1/8" 02 Radius/Standard Stile 6 RH or LHR 335 Black Anodized

    1W Radius with weatherstrip 4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized

    2 Bevel 21 Flat/Center Hung 4-1/2" Jamb

    XX Other Lip Lengths

    For door thickness other than 1-3/4”, contact factory.

    MS1950, MS1950-050 Series MS

    ® Deadlock

    MODELS

    MS1950Flat faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset

    $120.00

    MS1951Radius faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset

    $120.00

    MS1951WRadius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset

    $122.00

    MS1952Bevel faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset

    $120.00

    Schoolhouse function for above locks add $36.

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE BACKSET BOLT SHAPE HANDING FINISH

    MS195 0 -2 1 0 -6280 Flat 2 31/32" 1 Straight 5 LH or RHR 313 Dark Bronze Anodized

    1 Radius 3 1-1/8" 5 Hookbolt 6 RH or LHR 335 Black Anodized

    1W Radius with weatherstrip 4 1-1/2" 0 Non-Handed* 628 Clear Anodized

    2 Bevel

    *Any flat or radius faceplate except schoolhouse.

    DEADLOCKS

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    12 DEADLOCKS

    2190 Dual Force® Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors

    EXTERIOR TRIM SETELECTRIFIED EXTERIOR

    TRIM SET LOW PROFILE TRIM

    MODELS & TRIM SETS10B, US32,

    US32D US3, US4

    10B, US32, US32D

    US3, US4

    10B, US32, US32D

    US3, US4

    2190Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03)

    $566.00 $621.00 $719.00 $786.00 $469.00 $527.00

    2190Deadbolt/Deadlatch with flat/centerhung 4” or 4.5” strike, standard series handle designation (01, 02, 03)

    $580.00 $635.00 $733.00 $800.00 $483.00 $541.00

    2190Deadbolt/Deadlatch with flat or radius strike, designer series handle designation (MD through MW)

    $607.00 $662.00 $760.00 $827.00 $510.00 $568.00

    2190Deadbolt/Deadlatch with flat/centerhung 4” or 4.5” strike, designer series handle designation (MD through MW)

    $621.00 $676.00 $774.00 $841.00 $524.00 $582.00

    MODELS & FINISHES628, 313,

    335N/A

    2190 BOXED LOCKLess lever trim, with adjustable faceplate and choice of strike (Option 1 or 2)

    $265.00

    EK-2190Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim)

    $153.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. BACKSET STRIKE FACEPLATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH

    2190 -3 1 1 -1 01 32D3 1-1/8" 0 None 1 Clear Anodized 628 0 None 00 No Handle 03 Bright Brass (US3)

    4 1-1/2" 1 Standard Flat 2 Dark Bronze Anodized 313 1 With Trim Set STANDARD SERIES: 04 Satin Brass (US4)

    2 Radius Strike 3 Black Anodized 335 2 With Electrified Trim Set 01 Curve 10B Dark Bronze (US10B)

    3 Flat/Center Hung 4" 3 Low Profile Trim 02 Round 32 Bright Stainless (US32)

    4 Flat/Center Hung 4-1/2" 03 Square 32D Satin Stainless (US32D)

    DESIGNER SERIES:

    MD MJ

    ME MN (Handed)

    MG MV (Handed)

    MI MW

    Trim options 1 and 2 are for outswing doors only.

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    13 DEADLOCKS

    2290 Dual Force® Interconnected Deadbolt/Deadlatch for Wood or Hollow Metal Stile and Rail Doors

    EXTERIOR TRIM SETELECTRIFIED EXTERIOR

    TRIM SET LOW PROFILE TRIM

    MODELS & TRIM SETS10B, US32,

    US32D US3, US4

    10B, US32, US32D

    US3, US4

    10B, US32, US32D

    US3, US4

    2290Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03)

    $581.00 $637.00 $734.00 $802.00 $485.00 $534.00

    2290Deadbolt/Deadlatch with flat or radius strike, designer series handle designation (MD through MW)

    $622.00 $678.00 $775.00 $843.00 $526.00 $575.00

    MODELS & FINISHES313, 335,

    628US32D US32 US3, US4 N/A

    2290 BOXED LOCKLess lever trim, with adjustable faceplate and standard strike

    $270.00 $280.00 $290.00 $313.00

    EK-2190Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim)

    $153.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. BACKSET STRIKE FACEPLATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH

    2290 -3 1 1 -1 01 32D3 1-1/8" 0 None 0 US to match trim finish 0 None 00 No Handle 03 Bright Brass (US3)

    4 1-1/2" 1 Standard Flat 1 Clear Anodized 628 1 With Trim Set STANDARD SERIES: 04 Satin Brass (US4)

    2 Dark Bronze Anodized 313

    2 With Electrified Trim Set 01 Curve 10B Dark Bronze (US10B)

    3 Black Anodized 335 3 Low Profile Trim 02 Round 32 Bright Stainless (US32)

    03 Square 32D Satin Stainless (US32D)

    DESIGNER SERIES:

    MD MJ

    ME MN (Handed)

    MG MV (Handed)

    MI MW

    Trim options 1 and 2 are for outswing doors only.

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    14

    2331 Heavy Duty DeadboltMODEL & FINISHES 605, 625 121, 626

    2331Deadlock and strike

    $296.00 $282.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FINISH

    2331 -626121 To Match Dark Bronze Anodized 313

    605 Bright Brass

    625 Bright Chrome

    626 Satin Chrome

    4070 Series Short Throw Deadbolt (Projection Style)MODELS & FINISHES 313, 335, 628

    4070 Flat faceplate, 7/8", 31/32", or 1-1/8" backset

    $156.00

    4071Radius faceplate, 7/8", 31/32", or 1-1/8" backset

    $156.00

    4072Bevel faceplate, 7/8", 31/32", or 1-1/8" backset

    $156.00

    MODEL

    4073Without faceplate

    $148.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE BACKSET HANDING FINISH

    407 2 -2 6 -6280 Flat 1 7/8" 5 LH or RHR 313 Dark Bronze Anodized

    1 Radius 2 31/32" 6 RH or LHR 335 Black Anodized

    2 Bevel 3 1-1/8" 0 Non-Handed* 628 Clear Anodized

    *Any flat or radius faceplate.

    DEADLOCKS

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    15

    4189, 4190 Flush Locksets (Including Deadlock)MODELS & FINISHES 119, 121, 130,WHT

    4189-IB Flush lockset, individually boxed

    $90.00

    4190-IBFlush lockset, individually boxed with cylinder

    $120.00

    4195-IBDummy flushset, individually boxed

    $60.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO.

    LOCKSET EXTERIOR LOCK FACE

    STILE THICKNESS FINISH KEYING OPTIONS PACKAGING

    41 90 -09 -1 -130 -01 -IB

    89 Without Cylinder 00 Without Lock 1 1" to 1-3/8" 130 To match Clear Anodized 628 00 Without Cylinder IB Individually Boxed

    90 With Cylinder 09 Radius 2 1-7/16" to 1-5/8" 121 To match Dark Bronze Anodized 313 01 Keyed Different

    95 Dummy 09S Radius Stainless Steel 3 1-11/16" to 2"119 To match Black Anodized 335 02 Keyed Alike in Pairs

    10 Square 50 Keyed Alike (50)

    10S Square Stainless Steel

    4430, 4431 Flush Locksets (Including Deadlock)MODELS & FINISH BLACK

    4430-IBABS flush lockset, individually boxed

    $62.00

    4431-IB ABS flush lockset with cylinder, individually boxed

    $95.00

    4432-IBABS dummy flushset, individually boxed

    $27.00

    Kitted OptionsMODELS & FINISHES GRAY 335

    4413Grip pull for use with 4189, 4190

    $20.00

    4453-02Grip pull for use with 4430, 4431

    $30.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. LOCKSET EXTERIOR LOCK FACE STILE THICKNESS KEYING OPTIONS PACKAGING

    44 31 -09 -05 -01 -IB30 Without Cylinder 00 Without Lock 00 1" to 1-5/16" 00 Without Cylinder IB Individually Boxed

    31 With Cylinder 09 Radius 05 1-3/8" to 1-5/8" 01 Keyed Different

    32 Dummy 09S Radius Stainless Steel 08 1-3/4" to 2" 02 Keyed Alike in Pairs

    10 Square 50 Keyed Alike (50)

    10S Square Stainless Steel

    DEADLOCKS

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    16 DEADLOCKS · DEADLATCHES

    5017 Wood Door Deadlock/DeadlatchMODELS & FINISH 630

    5017-00 Stainless steel deadlock

    $55.00

    5017-02Self-latching deadlock

    $55.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. LATCH CONFIGURATION

    5017 -0000 Standard

    02 Self Latching

    DEADLATCHES

    4300 Steel Hawk® Electrified Deadlatch (eLatch)MODELS & FINISHES 313, 335, 628

    430031/32", 1-1/8", or 1-1/2" backset

    $392.00

    4300-MMonitored option, 31/32", 1-1/8", or 1-1/2" backset

    $448.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. BACKSET MONITORING STRIKE STIRKE SHAPE/LIP LENGTH FACEPLATE FINISH

    4300 -3 M -2 01 -6282 31/32" 0 None 1 Surface Mount (4304) 01 Flat/Standard Jamb 313 Dark Bronze Anodized

    3 1-1/8" M Monitored 2 Mortised (4901) 4-5/8" 02 Radius/Standard Stiles** 335 Black Anodized

    4 1-1/2" 17 Flat/Center Hung 4" Jamb** 628 Clear Anodized

    21 Flat/Center Hung 4-1/2" Jamb**

    ** See ACCESSORIES for available 4901 strike options.

    4300 RITE Pack® MODELS

    4300-2031/32" backset, surface mount or mortise strike, 313 and 628 faceplates

    $404.00

    4300-301-1/8" backset, surface mount or mortise strike, 313 and 628 faceplates

    $404.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. BACKSET MONITORING STRIKE RITE PACK

    4300 -3 0 -1 RP2 31/32" 0 None 1 Surface Mount (4304)

    3 1-1/8" 2 Mortised (4901) 4-5/8"

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    17DEADLATCHES

    4510 Standard Duty DeadlatchMODELS & FINISHES 313, 335, 628

    4510Flat faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included

    $77.00

    4511Radius faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included

    $77.00

    4511WRadius faceplate with weatherstrip, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included

    $80.00

    4512Bevel faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included

    $77.00

    MODEL

    4513-IBWithout faceplate, without strike

    $55.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH

    451 1 -3 6 -2 01 -628

    0 Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized

    1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized

    1W Radius with weatherstrip 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized

    2 Bevel 4 1-1/2" 21 Flat/Center Hung 4-1/2" Jamb

    4530 Standard Duty DeadlatchMODELS & FINISHES 313, 335, 628

    4530Flat faceplate, 7/8", 31/32", or 1-1/8" backset, strike included

    $94.00

    4531Radius faceplate, 7/8", 31/32", or 1-1/8" backset, strike included

    $94.00

    4532Bevel faceplate, 7/8", 31/32", or 1-1/8" backset, strike included

    $94.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH

    453 1 -3 6 -1 01 -6280 Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized

    1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized

    2 Bevel 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized

    21 Flat/Center Hung 4-1/2" Jamb

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    18 DEADLATCHES

    4781 Two-Point Deadlatch with PaddleMODEL & FINISHES 313, 335, 628 US26D US3, US26

    4781Paddle includes dogging feature

    $299.00 $380.00 $418.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. OPERATION PADDLE FINISH

    4781 T -021 -628T Top rod only 021 Push to LEFT 313 Dark Bronze Anodized US3 Bright Brass

    – Standard rod 041 Push to RIGHT 335 Black Anodized US26 Bright Chrome

    628 Clear Anodized US26D Satin Chrome

    4900 Heavy Duty DeadlatchMODELS & FINISHES 313, 335, 628 US26D US3, US4, US26

    4900Any handing, 31/32", 1-1/8", or 1-1/2" backset

    $105.00 $132.00 $170.00

    4911WRadius with weatherseal faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset

    $107.00

    MODEL

    4913-IBWithout faceplate or strike

    $79.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH

    49 00 -3 5 -2 01 -62800 Standard 2 31/32" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized

    11W Radius with Weatherseal 3 1-1/8" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stile 335 Black Anodized

    4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized

    21 Flat/Center Hung 4-1/2" Jamb

    4920AN Heavy Duty Deadlatch (ANSI Size)MODELS & FINISHES 313, 335, 628 US26D US3, US4, US26

    4920ANFlat faceplate, 1-1/2” or 2-3/4” backset with 4506 strike

    $128.00 $156.00 $195.00

    MODEL

    4923AN-IBWithout faceplate or strike

    $92.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. BACKSET HANDING STRIKE FACEPLATE FINISH

    4920AN 4 6 -602 -3134 1-1/2" 5 LH or RHR 000 Less Strike 313 Dark Bronze Anodized

    5 2-3/4" 6 RH or LHR 602 4506 Strike 335 Black Anodized

    628 Clear Anodized

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    19FLUSHBOLTS & PIVOTS

    FLUSHBOLTS & PIVOTS

    1870 Cylinder-Operated Flushbolt

    sw 1870 series MODELS & CYLINDER HEIGHT STANDARD

    CYLINDER HEIGHTCYLINDER HEIGHT

    OVER 12" (SPECIFY)

    1870Flat faceplate, 313, 335, or 628 finish

    $111.00 $139.00

    1871Radius faceplate, 313, 335, or 628 finish

    $111.00 $139.00

    1871WRadius faceplate with weatherstrip, 313, 335, or 628 finish

    $113.00 $141.00

    1872Bevel faceplate, 313, 335, or 628 finish

    $111.00 $139.00

    For cylinders over 12” specify cylinder height, 78” maximum.

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE SHAPE BACKSET HANDING FINISH

    187 0 -2 0 -6280 Flat 2 31/32" 0 Non-Handed* 313 Dark Bronze Anodized

    1 Radius 3 1-1/8" 5 LH or RHR 335 Black Anodized

    1W Radius with weatherstrip 6 RH or LHR 628 Clear Anodized

    2 Bevel

    *Any flat or radius faceplate.

    1870HM Cylinder-Operated FlushboltMODEL & FINISHES 313, 335, 628

    1870HMFor hollow metal, 1-1/4" backset

    $147.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE SHAPE HANDING FINISH

    187 0HM 5 -6280HM Flat 0 Non-Handed* 313 Dark Bronze Anodized

    2HM Bevel 5 LH or RHR 335 Black Anodized

    6 RH or LHR 628 Clear Anodized

    *Any flat or radius faceplate.

    1877 Cylinder-Operated FlushboltMODELS & FINISHES 628, 313 605 626

    18771-1/4" backset, 13-1/2" cylinder height

    $187.00 $237.00 $257.00

    18771-1/4" backset, cylinder height other than 13-1/2" (maximum cylinder height 57")

    $235.00 $286.00 $306.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FINISH

    1877 -628313 Dark Bronze Anodized 626 Satin Chrome

    605 Bright Brass 628 Clear Anodized

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    20 FLUSHBOLTS & PIVOTS

    MS1880, MS1881 Two-Point Flushbolts

    sw ms 1880MODELS & FINISHES 119, 121, 682

    MS1880Hourglass shaped turn

    $136.00

    MS1881Teardrop shaped turn

    $136.00

    MODEL 119, 121, 682

    TDK-1880Tall door kit for doors over 84", 144" maximum

    $24.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    MODEL TURN SHAPE CYLINDER HEIGHT* FINISH

    MS18 80 -01 -682MS18 80 Hourglass 01 31" to 35" 119 Black

    81 Teardrop 02 35-1/16" to 39" 121 Dark Bronze

    03 39-1/16" 43" 682 Satin Chrome

    04 43-1/16" to 47"

    05 47-1/16" to 51"

    *Distance from floor to cylinder centerline.

    MS2180 Auto-Release Two-Point FlushboltMODELS & FINISHES 119, 121, 682 N/A

    MS21807’, 8’, 9’, 10’ door height

    $204.00

    MK2180Monitoring kit, lock status SPDT switch

    $51.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. TURN SHAPE DOOR HEIGHT (FROM FLOOR TO TOP OF DOOR) FINISH TO MATCH

    MS218 0 -07 -1300 Hourglass 07 Up to 7' Door 119 Black Anodized

    1 Teardrop 08 Up to 8' Door 121 Dark Bronze Anodized

    2 Flush 09 Up to 9' Door 130 Clear Anodized

    10 Up to 10' Door

    B1921, B1923 Reinforcing PivotsMODELS & FINISH US2G

    B19211/2" to center line of 4" hinge. Pin uses small pin and bushing.

    $78.00

    B19233/4" to center line of 4-1/2" hinge. Pin uses large pin and bushing.

    $65.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. MODEL

    B192 11 4"

    3 4-1/2"

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    21EXIT DEVICES

    EXIT DEVICESNOTE: Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options. ALSO NOTE: Split finishes (faceplate/pushbar) are not available.

    8099 Dummy PushbarMODELS & FINISHES 313, 335, 628

    US4, US32D

    US3, US32

    8099Dummy pushbar without mechanism, for doors NOT requiring an exit device.

    $203.00 $432.00 $484.00

    8099M0Active dummy bar without latching mechanism, without monitoring switches.

    $269.00

    8099M1Active dummy bar without latching mechanism, with switch. Can be wired normally open, or normally closed to operate maglock, alarm or similar.

    $321.00 $547.00 $601.00

    8099M2Active dummy bar without latching mechanism, with two switches. Can be wired normally open or normally closed to operate maglock, alarm or similar.

    $380.00 $606.00 $661.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. MONITOR DOOR TYPE PUSHBAR FINISH WIDTH US FINISH

    8099 -M1 -3 0 36 -US3200 Inactive Dummy Bar 3 Aluminum 0 US Finish 30 30 inches US3 Bright Brass

    M0 Active Dummy Bar, no monitoring switches 4 Wood or hollow metal 1 Clear Anodized 628 36 36 inches US4 Satin Brass

    M1 Active Dummy Bar, one monitoring switch 2 Dark Bronze Anodized 313 42 42 inches US32 Bright Stainless

    M2 Active Dummy Bar, two monitoring switches 3 Black Anodized 335 48 48 inches US32D Satin Stainless

    3100, 8100 Surface Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

    8100Surface vertical rod for wood and hollow metal doors

    $843.00 $1,067.00 $1,280.00

    8100TTop rod only

    $769.00 $971.00 $1,153.00

    3100 Fire-rated surface vertical rod

    $1,057.00 $1,278.00 $1,405.00

    3100T Top rod only for metal doors

    $950.00 $1,150.00 $1,367.00

    3100W Top rod only for wood doors

    $995.00 $1,143.00 $1,253.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONSMONITORING

    OPTION

    DOOR OPENING WIDTHOn pair of doors, specify HALF

    of the total exit openingUS FINISH END CAPS OPTIONFOR US FINISH

    81 00 - SE M2 -30 -US32D MEC31 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps

    81 Life-Safety 11 Clear Anodized 628W Top Rod only -

    Wood doorsSE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass

    22 Dark Bronze Anodized 313 - Standard rod

    C Cylinder Dogging (non-fire rated devices ONLY) (Blank) No Monitor 42 42 inches US32 Bright Stainless

    33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless

    (Blank) No OptionAXXB Alarmed Exit Device where XX is door opening width

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    22 EXIT DEVICES

    8200 Narrow Stile Surface Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

    8200Narrow stile surface vertical rod exit device

    $792.00 $1,014.00 $1,228.00

    8200T Top rod only

    $721.00 $913.00 $1,105.00

    Kitted OptionsMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

    8055Tall door kit for doors up to 10' tall, for use with 8100, 8200

    $106.00 $136.00 $173.00

    3055 Tall door kit for doors up to 10' tall, for use with 3100

    $112.00 $144.00 $180.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION

    DOOR OPENING WIDTH On pair of doors, specify HALF

    of the total exit openingUS FINISH END CAPS OPTIONFOR US FINISH

    82 00 - ED M2 -36 -US382 Life-Safety 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps

    11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass

    22 Dark Bronze Anodized 313 C Cylinder Dogging

    (Blank) No Option 42 42 inches US32 Bright Stainless

    33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless

    (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    23EXIT DEVICES

    3300, 8300 Mortise Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

    8300Mortise type exit device

    $634.00 $953.00 $994.00

    3300Fire-rated mortise type

    $958.00 $1,130.00 $1,214.00

    Kitted OptionsMODELS & FINISH US32D

    8360-XX Long lip strike, for jambs that project outward 2-1/4" beyond centerline of door, stainless steel, for use with 8300 only

    $55.00

    4009-01 Open back strike for 1-3/4" thick doors

    $126.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    MODEL FACEPLATE FINISHFACE

    SHAPE DEVICE OPTIONSMONITORING

    OPTIONDOOR

    HANDINGPUSHBAR

    FINISH

    DOOR OPENING WIDTH On pair of doors, specify HALF

    of the total exit openingUS FINISH END CAPS OPTION

    83 3 0 ED M -7 3 A36B

    33 Fire Rated 0 US Finish 0 Flat (3300 only)LR Electric Latch Retraction M Single Switch 7 RHR 0 US Finish 30 30 inches US3 Bright Brass

    MEC Matching End Caps

    83 Life-Safety 1 Clear Anodized 6282 Bevel (8300 only)

    SE Silent Electrification Latch Retraction M2 Dual Switch 8 LHR

    1 Clear Anodized 628 36 36 inches US4 Satin Brass

    2 Dark Bronze Anodized 313

    C Cylinder Dogging (non-fire rated devices ONLY)

    (Blank) No Monitor

    2 Dark Bronze Anodized 313 42 42 inches

    US32 Bright Stainless

    3 Black Anodized 335 ED Electric Dogging

    3 Black Anodized 335 48 48 inches

    US32D Satin Stainless

    - Without OptionsAXXB Alarmed Exit Device where XX is door opening width

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    24 EXIT DEVICES

    8400 Narrow Stile Mortise Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US32

    8400Mortise type exit device for single leaf

    $577.00 $842.00 $938.00

    Kitted OptionsMODELS US32D

    8455-01 Long face strike for covering MS strike prep

    $91.00

    8460-17 Long lip strike for jambs that project outward 2-1/4" beyond the centerline of door

    $69.00

    91-0995-02 2" thick door kit for use with 8300, 8400

    $12.00

    91-0995-03 2-1/4" thick door kit for use with 8300, 8400

    $14.00

    91-0995-04 2-1/2" thick door kit for use with 8300, 8400

    $16.00

    91-0995-05 2-3/4" thick door kit for use with 8300, 8400

    $19.00

    91-0995-06 3" thick door kit for use with 8300, 8400

    $21.00

    91-0325-01 Thermal door kit, 1/4" cladding, for use with 8400

    $73.00

    91-0325-02 Thermal door kit, 1/2" cladding, for use with 8400

    $133.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    MODEL FACEPLATE FINISH FACE SHAPE DEVICE OPTIONSMONITORING

    OPTION BACKSETDOOR

    HANDINGPUSHBAR

    FINISH

    DOOR OPENING WIDTH On pair of doors, specify HALF

    of the total exit openingUS FINISH

    END CAPS OPTION FOR

    US FINISH

    84 1 4 SE M2 -4 7 1 4284 Life-Safety 0 US Finish 0 Flat, Radius, Bevel

    LR Electric Latch Retraction

    M Single Switch 2 31/32" 7 RHR 0 US Finish 30 30 inches

    US3 Bright Brass

    MEC Matching End Caps

    1 Clear Anodized 628

    4 Radius w/Weatherstrip

    SE Silent Electrification Latch Retraction

    M2 Dual Switch 3 1-1/8" 8 LHR

    1 Clear Anodized 628 36 36 inches

    US4 Satin Brass

    2 Dark Bronze Anodized 313

    C Cylinder Dogging

    (Blank) No Monitor 4 1-1/2"

    2 Dark Bronze Anodized 313

    42 42 inches US32 Bright Stainless

    3 Black Anodized 335

    ED Electric Dogging

    3 Black Anodized 335 48 48 inches

    US32D Satin Stainless

    - Without Options AXXB Alarmed Exit Device where XX is door opening width

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    25EXIT DEVICES

    3600, 8500 Metal Door Concealed Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

    8500Concealed vertical rod exit device

    $601.00 $867.00 $912.00

    8500T Top rod only

    $537.00 $774.00 $814.00

    3600 Fire-rated concealed vertical rod

    $1,012.00 $1,210.00 $1,299.00

    3600T Top rod only

    $884.00 $1,074.00 $1,178.00

    Kitted OptionsMODEL

    3655 Tall door kit for doors taller than 66" above bar height, up to 10'

    $50.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION

    DOOR OPENING WIDTH On pair of doors, specify HALF

    of the total exit openingUS FINISH

    END CAPS OPTION FOR

    US FINISH

    85 00 T ED M -36 -US32D36 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps

    85 Life-Safety 11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass

    22 Dark Bronze Anodized 313 C Cylinder Dogging (non-fire rated devices only) (Blank) No Monitor 42 42 inches US32 Bright Stainless

    33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless

    (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    26 EXIT DEVICES

    8600 Narrow Stile Concealed Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

    8600Concealed vertical rod exit device

    $566.00 $848.00 $887.00

    8600TTop rod only

    $511.00 $764.00 $799.00

    Kitted OptionsMODEL

    8655 Tall door kit for doors up to 10’ for use with 8500, 8600

    $48.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION

    DOOR OPENING WIDTH On pair of doors, specify HALF

    of the total exit openingUS FINISH

    END CAPS OPTION FOR

    US FINISH

    86 22 T SE M2 -3686 Life-Safety 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps

    11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass

    22 Dark Bronze Anodized 313 C Cylinder Dogging

    (Blank) No Monitor 42 42 inches US32 Bright Stainless

    33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless

    (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width

    3700, 8700 Rim Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

    8700Rim type exit device

    $416.00 $647.00 $689.00

    3700Fire-rated rim type

    $703.00 $875.00 $970.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING OPTION

    DOOR OPENING WIDTH On pair of doors, specify HALF

    of the total exit openingUS FINISH

    END CAPS OPTION FOR

    US FINISHVOLTAGE

    37 00 EL M1 -36 -US3 MEC -1237 Fire Rated 00 US Finish EL Electric Latch Retraction (indicate 12V/24V) M Single Switch 30 30 inches US3 Bright Brass

    MEC Matching End Caps 12 Volts

    87 Life-Safety 01 Clear Anodized 628 SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass 24 Volts

    02 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Monitor 42 42 inches US32 Bright Stainless(For EL Option Only)

    03 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless

    - Without Options AXXB Alarmed Exit Device where XX is door opening width

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    27EXIT DEVICES

    8800 Narrow Stile Rim Exit DeviceMODEL & FINISHES 313, 335, 628 US4, US32D US3, US32

    8800Rim type exit device

    $400.00 $624.00 $666.00

    Kitted OptionsMODELS

    3889-08 Mullion for doors up to 8' for use with 8700, 3700

    $381.00

    3889-10 Mullion for doors up to 10' for use with 8700, 3700

    $424.00

    3890-08 Aluminum mullion for doors up to 8' for use with 8800

    $533.00

    3890-10 Aluminum mullion for doors up to 10' for use with 8800

    $555.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING OPTION

    DOOR OPENING WIDTH On pair of doors, specify HALF of

    the total exit openingUS FINISH

    END CAPS OPTION FOR

    US FINISHVOLTAGE

    88 01 C M2 -36 -1288 Life-Safety 00 US Finish EL Electric Latch Retraction (indicate 12V/24V) M Single Switch 30 30 inches US3 Bright Brass

    MEC Matching End Caps 12 Volts

    01 Clear Anodized 628 SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass 24 Volts

    02 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Monitor 42 42 inches US32 Bright Stainless (For EL Option Only)

    03 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless

    - Without Options AXXB Alarmed Exit Device where XX is door opening width

    3900, 8900 Wood Door Concealed Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

    8900 Wood door concealed vertical rod exit device

    $649.00 $962.00 $1,010.00

    3900 Fire-rated wood door concealed vertical rod

    $1,079.00 $1,252.00 $1,428.00

    Kitted OptionsMODEL

    8955-01Tall door kit for doors up to 10’ for use with 8900

    $50.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION

    DOOR OPENING WIDTH On pair of doors, specify HALF

    of the total exit openingUS FINISH

    END CAPS OPTION FOR

    US FINISH

    89 00 W LR M2 -36 -US3239 Fire Rated 00 US Finish W Top Rod Wood LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps

    89 Life-Safety 11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass

    22 Dark Bronze Anodized 313 C Cylinder Dogging (non-fire rated devices only) (Blank) No Monitor 42 42 inches US32 Bright Stainless

    33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless

    (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    28 EXIT DEVICES

    ACCESSORIES FOR EXIT DEVICESOPTIONS & FINISHES N/A US4, US32D US3, US32

    SE Silent electrification motorized latch retraction

    $641.00

    EL Electric latch retraction for use with 3700, 8700, 8800

    $340.00

    ELD Electric latch retraction with mechanical dogging for rim exit devices only

    $388.00

    LR Electric latch retraction

    $582.00

    ALARM Battery-operated alarmed exit device

    $447.00

    M1 Request to exit - monitor/single signal switch

    $117.00

    M2 Request to exit - monitor/double signal switch

    $175.00

    C Cylinder dogging

    $47.00

    ED Electric dogging

    $398.00

    MEC Matching end caps

    $72.00 $90.00

    KITTED OPTIONS FOR EXIT DEVICESMODELS & FINISHES N/A 313, 335, 628

    US4, US32D

    US3, US32

    US26D, US3

    ALARM EXIT KIT Kit for retrofitting an alarm function to an existing Adams Rite exit device. Includes new pushbar, end caps and installation hardware.

    $548.00 $752.00 $792.00

    91-0897-01 Single signal switch kit, retrofits to 3000/8000

    $97.00

    91-0897-02 Double signal switch kit, retrofits to 3000/8000

    $154.00

    26-0584-MP Sex bolts, 2 per bag, 2 kits required per exit device

    $13.00

    MODIFICATION OPTIONS FOR EXIT DEVICESMODELS

    THICK DOOR For doors thicker than 1-3/4" and/or door skins plus reinforcement thicker than those specified in the Adams Rite Master Reinforcement Sheet template, for CVR and mortise devices

    $54.00

    UNIQUE DOOR Cutting charges for non-standard lengths between 30" and 48"

    $70.00

    NOTE: Thick door modification options are available for 8300, 8400, and 8600 model exit devices only.

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    29ELECTRIC STRIKES

    ELECTRIC STRIKES

    7100, 7101 Electric StrikesMODELS & FINISHES 313, 335, 628 626

    es 7100

    7100 For aluminum jambs

    $176.00 $200.00

    7101 For radius aluminum stiles

    $176.00

    Lip Extensions up to 3” for center-hung or non-flush doors add $30.

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO.

    FACEPLATE SHAPE VOLTAGE

    CURRENT AND DUTY FEATURES* FINISH**

    LIP EXTENSIONS (DIM. A)(Door Centerline to Jamb Edge)

    710 0 -3 1 0 -628 -00

    0 Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure313 Dark Bronze Anodized 00 1-1/16" or less 05 2"

    1 Radius 5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"

    7 Monitored/ Fail-Safe 626 Satin Chrome 02 1-5/8" 09 2-1/2"

    9 Monitored/ Fail-Secure 628 Clear Anodized 03 1-3/4" 12 2-7/8"

    *Fail-secure can be field converted to fail-safe or vice-versa. **7101 available in 628, 313, 335 only.

    7110, 7111 Electric StrikesMODELS & FINISHES 652

    7110 For wood jambs

    $210.00

    7111 For wood jambs, long faceplate

    $212.00

    Lip Extensions up to 3” for center-hung or non-flush doors add $30.

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO.

    FACEPLATE LENGTH VOLTAGE

    CURRENT AND DUTY FEATURES* FINISH

    LIP EXTENSIONS (DIM. A)(Door Centerline to Jamb Edge)

    711 0 -3 1 0 -652 -00

    0 7-15/16" 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 652 Satin Chrome 00 1-1/16" or less 05 2"

    1 10-1/4" 5 24 Volt 4 AC Intermittent 5 Fail-Safe 01 1-1/2" 07 2-1/4"

    7 Monitored/ Fail-Safe 02 1-5/8" 09 2-1/2"

    9 Monitored/ Fail-Secure 03 1-3/4" 12 2-7/8"

    *Fail-secure can be field converted to fail-safe or vice-versa.

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    30 ELECTRIC STRIKES

    7130, 7131 Electric StrikesMODELS & FINISHES 313, 335, 628

    7130 For aluminum jambs, pre-cut for MS lock strike

    $181.00

    7131 For radius aluminum stiles, pre-cut for MS lock strike

    $181.00

    Lip Extensions up to 3” for center-hung or non-flush doors add $30.

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO.

    FACEPLATE LENGTH VOLTAGE

    CURRENT AND DUTY FEATURES* FINISH

    LIP EXTENSIONS (DIM. A)(Door Centerline to Jamb Edge)

    713 0 -3 1 0 -313 -00

    0 Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure313 Dark Bronze Anodized 00 1-1/16" or less 05 2"

    1 Radius 5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"

    628 Clear Anodized 02 1-5/8" 09 2-1/2"

    03 1-3/4" 12 2-7/8"

    *Fail-secure can be field converted to fail-safe or vice-versa.

    7140 Electric Strike

    FITS STANDARDMOUNTING

    TAB ANSI PREP

    3/32"2.4mm

    MODEL & FINISHES 313, 335, 628 626

    7140 ANSI size for hollow metal and wood jambs

    $176.00 $200.00

    Lip Extensions up to 3” for center-hung or non-flush doors add $30.

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH

    LIP EXTENSIONS (DIM. A)(Door Centerline to Jamb Edge)

    7140 -3 1 0 -628 -003 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"

    5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 50 1-3/8" 07 2-1/4"

    626 Satin Chrome 01 1-1/2" 09 2-1/2"

    628 Clear Anodized 02 1-5/8" 12 2-7/8"

    03 1-3/4"

    *Fail-secure can be field converted to fail-safe or vice-versa.

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    31

    ARM-014-01/14

    ELECTRIC STRIKES

    7160 Electric StrikeMODELS & FINISHES 313, 335, 628 626

    7160 For aluminum jambs

    $220.00 $245.00

    7160-XX7 OR XX9 Monitoring signal switches

    $320.00 $345.00

    Lip Extensions up to 3” for center-hung or non-flush doors add $30.

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH

    LIP EXTENSIONS (DIM. A)(Door Centerline to Jamb Edge)

    7160 -3 1 0 -628 -003 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"

    5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"

    7 Monitor/Fail-Safe 626 Satin Chrome 02 1-5/8" 09 2-1/2"

    9 Monitor/Fail-Secure 628 Clear Anodized 03 1-3/4" 12 2-7/8"

    *Fail-secure can be field converted to fail-safe or vice-versa.

    7170 Electric Strike

    FITS STANDARDMOUNTING

    TAB ANSI PREP

    3/32"2.4mm

    MODELS & FINISHES 313, 335, 628 626

    7170 For hollow metal and wood jambs

    $220.00 $245.00

    7170-XX7 OR XX9 Monitoring signal switches

    $320.00 $345.00

    Lip Extensions up to 3” for center-hung or non-flush doors add $30.

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH

    LIP EXTENSIONS (DIM. A)Door Centerline to Jamb Edge

    7170 -3 1 0 -628 -003 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"

    5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 50 1-3/8" 07 2-1/4"

    7 Monitor/Fail-Safe 626 Satin Chrome 01 1-1/2" 09 2-1/2"

    9 Monitor/Fail-Secure 628 Clear Anodized 02 1-5/8" 12 2-7/8"

    03 1-3/4"

    *Fail-secure can be field converted to fail-safe or vice-versa.

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    32 ELECTRIC STRIKES

    7100 Series Electric Strike ComponentsSTRIKE BODY KITS

    7103A For use with faceplate kits: FPK00, FPK01, FPK10, FPK11, FPK30, FPK31, FPK40

    $147.00

    7173A For use with faceplate kits: FPK00, FPK11, FPK31

    $190.00

    FACEPLATE KITS & FINISHES 313,335, 628 US26D US3 652

    FPK00 For use with body kits: 7103A, 7173A

    $30.00 $50.00 $53.00

    FPK01 For use with body kit: 7103A

    $30.00

    FPK10 For use with body kit: 7103A

    $86.00 $63.00

    FPK11 For use with body kits: 7103A, 7173A

    $89.00 $66.00

    FPK30 For use with body kit: 7103A

    $34.00

    FPK31 For use with body kits: 7103A, 7173A

    $34.00

    FPK40 For use with body kit: 7103A

    $30.00 $50.00 $53.00

    FPK45 For use with body kit: 7103A, for installing electric strike in previous prep, 4901, 4501 strike cover.

    $33.00

    KITTED OPTIONS

    91-0171-01 through -13 Lip extension kits for use with 7100 through 7140

    $31.00

    91-0171-50 Lip extension kits for use with 7100 through 7140 interior framing systems

    $31.00

    91-0172-01 through -13 Lip extension kits for use with 7160 and 7170

    $31.00

    91-0172-50 Lip extension kits for use with 7160 and 7170 interior framing systems

    $31.00

    7100 LIP EXTENSION

    LIP EXTENSION PART NUMBER APPLICABLE ELECTRIC STRIKES

    91-0171-01 through -13 7100, 7110, 7111, 7130, 7140

    91-0172-01 through -13 7160, 7170

    91-0173-01 through -13 7108, 7128

    7100 LIP EXTENSION DIMENSIONS

    DASH PART NUMBER

    DIMENSION ‘A’ – DOOR CENTERLINE TO JAMB EDGE

    DASH PART NUMBER

    DIMENSION ‘A’ – DOOR CENTERLINE TO JAMB EDGE

    DASH PART NUMBER

    DIMENSION ‘A’ – DOOR CENTERLINE TO JAMB EDGE

    -00 1-1/16” -05 2” -10 2-5/8”

    -01 1-1/2” -06 2-1/8” -11 2-3/4”

    -02 1-5/8” -07 2-1/4” -12 2-7/8”

    -03 1-3/4” -08 2-3/8” -13 3”

    -04 1-7/8” -09 2-1/2”

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    33ELECTRIC STRIKES

    7240 Series Fire-Rated Electric StrikesMODELS & FINISH 630

    7240 Fire-rated, for cylindrical latches

    $320.00

    7240-50 Lip extension for interior frame systems

    $355.00

    7240-XX9 Monitoring signal switches

    $420.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES FINISH

    LIP EXTENSIONS (DIM. A)Door Centerline to Jam Edge

    for Interior Frames

    7240 -3 1 0 -630 -503 12 Volt 1 DC Continuous or Intermittent 0 Fail-Secure* 630 Satin Stainless 00 1-1/16" or less

    5 24 Volt 4 AC Intermittent 9 Monitor/Fail-Secure 50 1-3/8"

    *Not available fail-safe.

    7270 Series Fire-Rated Electric StrikesMODELS & FINISH 630

    7270 Fire-rated, for mortise latches

    $370.00

    7270-50 Lip extension for interior frame systems

    $405.00

    7270-XX9 Monitoring signal switches

    $470.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES FINISH

    LIP EXTENSIONS (DIM. A)Door Centerline to Jam Edge

    for Interior Frames

    7270 -3 1 0 -630 -503 12 Volt 1 DC Continuous or Intermittent 0 Fail-Secure* 630 Satin Stainless 00 1-1/16" or less

    5 24 Volt 4 AC Intermittent 9 Monitor/Fail-Secure 50 1-3/8"

    *Not available fail-safe.

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    34

    7400, 7401 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 630 606 605, 629 611, 612 119, 121, 130

    7400 For radius jambs

    $229.00 $253.00 $253.00 $257.00 $265.00

    7400-M Monitoring signal switches

    $329.00 $353.00 $353.00 $357.00 $365.00

    7401For radius aluminum stiles

    $229.00

    7401-M Monitoring signal switches

    $329.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO.

    FACEPLATE SHAPE FEATURES FINISH

    740 0 M 6280 Flat - None 7400 ONLY 7401 ONLY

    1 Radius M Monitored 313 Dark Bronze Anodized 612 Satin Bronze 119 To match 335 Black Anodized

    A Modular Pack - Body Kit* 335 Black Anodized 628 Clear Anodized 121 To match 313 Dark Bronze Anodized

    605 Bright Brass 629 Bright Stainless 130 To match 628 Clear Anodized

    606 Satin Brass 630 Satin Stainless

    Fail-secure can be field converted to fail-safe or vice-versa. *Modular Packing Program - match body kit with faceplate kit to complete. Use 7400A for standard jambs and 7401A for radius stile mounting. No finish designation required.

    7410, 7411 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 630

    7410For wood jambs, 7-15/16" faceplate

    $253.00 $281.00

    7410-M Monitoring signal switches

    $353.00 $381.00

    7411 For wood jambs, 10-1/4" faceplate

    $264.00 $281.00

    7411-M Monitoring signal switches

    $364.00 $381.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE LENGTH FEATURES FINISH

    741 0 - 6280 7-15/16" - None 313 Dark Bronze Anodized 628 Clear Anodized

    1 10-1/4" M Monitored 335 Black Anodized 630 Satin Stainless

    Fail-secure can be field converted to fail-safe or vice-versa.

    ELECTRIC STRIKES

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    35

    7430, 7431 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 119, 121, 130

    7430 For aluminum jambs, flat faceplate

    $235.00 $235.00

    7430-M Monitoring signal switches

    $335.00 $335.00

    7431 For aluminum stiles, radius faceplate

    $235.00 $235.00

    7431-M Monitoring signal switches

    $335.00 $335.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FACEPLATE SHAPE FEATURES FINISH

    743 0 M 6280 Flat - None 313 Dark Bronze Anodized 119 To match 335 Black Anodized

    1 Radius M Monitored 335 Black Anodized 121 To match 313 Dark Bronze Anodized

    628 Clear Anodized 130 To match 628 Clear Anodized

    Fail-secure can be field converted to fail-safe or vice-versa.

    7440 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 630 606 605, 629 611, 612

    7440 For steel and wood, jambs and doors

    $229.00 $253.00 $253.00 $257.00 $265.00

    7440-M Monitoring signal switches

    $329.00 $353.00 $353.00 $357.00 $365.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FEATURES FINISH

    7440 M 628- None 313 Dark Bronze Anodized 606 Satin Brass 629 Bright Stainless

    M Monitored 335 Black Anodized 612 Satin Bronze 630 Satin Stainless

    605 Bright Brass 628 Clear Anodized

    Fail-secure can be field converted to fail-safe or vice-versa.

    74R1 Ultraline Electric StrikesMODELS & FINISHES 119, 121, 130

    74R1 For use with rim type exit devices with 3/4" latchbolt

    $311.00

    74R1-M Monitoring signal switches

    $411.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FEATURES FINISH

    74R1 M -130- None 119 To match 335 Black Anodized

    M Monitored 121 To match 313 Dark Bronze Anodized

    130 To match 628 Clear Anodized

    Fail-secure can be field converted to fail-safe or vice-versa.

    ELECTRIC STRIKES

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    36 ELECTRIC STRIKES

    74R2 Ultraline Electric StrikeMODELS & FINISHES 119, 121, 130

    74R2 For use with narrow stile rim type exit devices with 1/2" latchbolt

    $311.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. FINISH

    74R2 -130119 To match 335 Black Anodized

    121 To match 313 Dark Bronze Anodized

    130 To match 628 Clear Anodized

    7400 Series Electric Strike ComponentsSTRIKE BODY KITS

    7400AStandard body, for use with faceplate kits: FPK7400, FPK7410, FPK7411, FPK7430, FPK7440, FPK7445

    $207.00

    7401ARadius body, for use with faceplate kits: FPK7401, FPK7431

    $207.00

    FACEPLATE KITS & FINISHES 313, 335, 628 630 606 605, 629 611, 612 119, 121,130

    FPK7400 For use with body kit: 7400A

    $23.00 $47.00 $47.00 $50.00 $60.00

    FPK7401 For use with body kit: 7401A

    $23.00

    FPK7410 For use with body kit: 7400A

    $47.00 $75.00

    FPK7411 For use with body kit: 7400A

    $59.00 $85.00

    FPK7430 For use with body kit: 7400A

    $29.00

    FPK7431 For use with body kit: 7401A

    $29.00

    FPK7440 For use with body kit: 7400A

    $23.00 $47.00 $47.00 $50.00 $60.00

    FPK7445 For use with body kit:7400A

    $33.00

    KITTED OPTIONS

    LEK7400-01 Lip extension kits for use with 7400 series electric strikes

    $38.00

    VA7400-16VDC 16V DC adapter kit required for all 7400 strikes when applying 16VDC

    $17.00

    WDC7400 Wood door cover plate for use when mounting 7400 in the inactive leaf of a wood door pair (to simplify the mortising operation)

    $11.00

    ELX ElectroLynx™ Adapter to connect Adams Rite products to the ElectroLynx system

    $27.00

    HOW TO ORDER Specify quantity and the following information. Order related products separately.

    PRODUCT NO. LIP EXTENSIONS (distance from vertical centerline of the door in the closed position to the edge of the jamb)

    LEK7400- -0001 1-1/2" 03 1-3/4" 05 2" 07 2-1/4" 09 2-1/2” 11 2-3/4" 13 3"

    02 1-5/8" 04 1-7/8" 06 2-1/8" 08 2-3/8" 10 2-5/8" 12 2-7/8" 50 1-3/8"

  • 800.872.3267 • Fax 800.232.7329

    10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

    www.adamsrite.com

    37

    ARM-014-01/14

    TRIM

    TRIM

    1000 Series TurnsMODELS & FINISHES 119, 121, 130

    1000-01 OR -02 Turn for use with MS1847 deadlock

    $20.00