bertauski.combertauski.com/ttc/LAB 5 TUTORIAL.docx · Web viewAdd title block Project: Robert Plant...
Transcript of bertauski.combertauski.com/ttc/LAB 5 TUTORIAL.docx · Web viewAdd title block Project: Robert Plant...
PROLANDSCAPE PLANNER
LAB 5
1. Open Image Planner Program2. Start Drawing Immediately3. Save as “Your Names Image Lab 5”4. 8 ½ x 11 page and 1/16” = 1’
5. Property linesa) Draw/Wizard/Property Linesb) Enter distance and angle followed by Enter Coordinate
110’, 300-degrees 125’, 0-degrees 110’, 60-degrees
1
6. Editinga) Edit/Trim/Breakb) Left click anywhere on property linec) Left click on upper left cornerd) Left click anywhere on property linee) Left click on upper right cornerf) Right-click to finish
7. Delete top linea) Left click on top lineb) Hit delete key
8. Advanced toolbarsa) View/Show Advanced Toolbars
a. Snap toolb. Click end (E)
2
9. Draw sidewalka) Draw/Paver/Edge
a) Left-click end of upper left property linea. Type the letter O to draw a straight line
b) Draw line halfway across and left-clickc) Draw the rest of line and left-click to end of line on the rightd) Right-click or ESC key to finish
10. Flex curves a) Double click on lineb) Hold CTRL keyc) Left-click and flex first segment upd) Left-click and flex second segment down
3
11. Offset toola) Draw/Paver/Create offset and paver
b) Set at 10’
c) Left-click below top line to set other side of sidewalk
4
d) Double click on sidewalke) Select snap near (N)
f) Left-click to adjust ends of path to meet property line
12. Draw circlea) Draw/2D CAD/Circle/Center radius
5
b) Set 30’
c) Set snap middle (M)
d) Left click circle in middle of bottom linee) Right click to finish
6
13. Offset toola) Draw/Duplicate/Offset
b) Set 10’
c) Left-click outside of circle to place second circled) Right click or ESC key to finish
7
14. Retaining walla) Change to semi-circle wall
b) Turn off snap by left-clicking on S
c) Drawing retaining wall on top of circles (start by left-clicking on right side)
8
d) Delete circles
15. Draw closed paver
a) Snap to near (N)b) Outline by left-clicking around patio c) Right click to finish
9
d) Change concrete pattern to PavingBr – Paving Brickse) Change size to 2.00
16. Create customized symbol foldera) Organize a favorites folder
b) Create folder and type LAB 5
10
c) Find a plant on list (below)
PLANT SIZE LIST INSTALLCleyera 10 gal $50 $50Rose, Double Knockout 3 gal $30 $60Butterfly bush, Purple Haze 10 gal $50 $50Crapemyrtle, Red 15 gal $75 $100Elm, Drake 15 gal $75 $100Oak, Live 3” $225 $300Juniper, Hillspire 15 gal $75 $100
d) Right click on plante) Left click on Add to Favorites
f) Select LAB 5 folderg) Repeat for all plants
11
17. Set prices for ALL the symbolsa) Go to plants in LAB 5 folder
b) Right click on a symbol and select Edit Database and Prices
c) Click on Pricing tab
12
d) Change the LIST price and INSTALL price for the correct planting size (refer to plant list)
PLANT SIZE LIST INSTALLCleyera 10 gal $50 $50Rose, Double Knockout 3 gal $30 $60Butterfly bush, Purple Haze 10 gal $50 $50Crapemyrtle, Red 15 gal $75 $100Elm, Drake 15 gal $75 $100Oak, Live 3” $225 $300Juniper, Hillspire 15 gal $75 $100
18. Insert symbols and resize
IMPORTANT! Select the correct planting size before duplicating
a) Drop a symbol on planb) Resize manuallyc) BEFORE MAKING COPIES! Right click on symbol and Select Size (refer to above plant list)
d) Right click and Rubber Stamp to make copies of symbol
13
19. Insert Turfa) Change scale to 5 b) Left click in turf area
20. Insert mulch between sitting walls
21. Label symbols with callouta) Draw/Annotation/Callout
14
b) Left click on symbolc) Left click to place line
a. Type “O” for straight linesd) Right click to finish
22. Add title blocka) Project: Robert Plantb) Draftsman: Your namec) Company: Your company
15
23. Insert north arrow and graphic scalea) Symbol library/Misc/Utility
24. Insert legenda) Check only the following boxes
a. Botanical nameb. Common namec. Plant sized. Quantity
b) Move botanical name up
16
25. Insert logoa) Draw/Picture
b) Left click to place upper left corner of image and drag to lower right cornerc) Open your logo
26. Save project27. Save as JPG28. Create proposal
17
a) Add customer
b) First name LABc) Last name 5d) Click okay then click on LAB 5e) Only export the Project Detail Reportf) Change file format to PDF
29. Email the following to [email protected] TITLE: LAB 5, NAMESATTACH:a) Lab 5.JPGb) Lab 5.LNFc) Project detail report PDF
18