3 - Locks for narrow stiles · » Cross key type cylinder. Locks are supplied with three keys. »...
Transcript of 3 - Locks for narrow stiles · » Cross key type cylinder. Locks are supplied with three keys. »...
LOCKS FOR NARROW STILES
2 3
LEADING THE IRONWORK LOCK SEGMENT
Among the products that have turned TESA into a global reference for security are our locks for narrow stiles. Thanks to the tests carried out in the lab, TESA’s locks for aluminium profi les present the highest resistance and the highest passive security, plus they easily beat the mark of 200,000 cycles. Which is why every time you install a TESA lock you are choosing a guaranteed solution for the door, providing it with the maximum security and resistance. Choose TESA for the highest security.
2 3
WHY DO INSTALLERS PREFER TESA LOCKS?
When it comes to aluminium-profi le locks, only one thing is more important for us than creating a top-security product: to make the ironwork installer’s job as easy as possible. That’s why our locks have been developed with the aim of allowing a quick and simple installation as well as an easy maintenance.Thanks to this, we have maintained our position as leaders of our segment in Spain, and this is the reason why in 2005 we manufactured in our plants more than 4’5 million locks for wood and aluminium.
GUARANTEED BY TESA
To purchase TESA products is a quality guarantee. All our locks have been certifi ed to the highest degree by the ISO 9001 Quality Standard, the ISO 14001 environmental standard, and the Security at Work and Occupational Hazard Prevention standard. For this reason, every time you purchase a TESA product you can be sure you are buying a top-quality product.
EASIER TO INSTALL, SAFER AND WITH BETTER PROTECTION
The latest models of locks incorporate 15mm-wide cases, thus minimizing the mechanizing of ribs.Also, a new range of escutcheons and strikes has been developed in order to bring higher security and to enable an easier installation of the locks.
WE BRING YOU AN INTEGRAL LOCKING SOLUTION
TESA brings you the widest range of products for
aluminium stiles, ranging from sliding locks to the latest generation of monopoint and multipoint PREMIUM locks with gear mechanism; from the swinging hook series to the panic exit locks for aluminium profi les. The great variety of backsets (up to 35mm) and the combinations of latches and bolts, along with a wide range of accessories, provides the user with the right technical solution for every locking problem.
GUARANTEED PROCESS
Our R+D department works hard to improve our production processes, offering the market newer and better products that meet the market’s increasingly demanding needs.For the manufacturing of its products, TESA uses stainless steel as the standard material for fronts and strikes. The other components have been protected with a nickel-plating process that ensures the durability of the components in outdoors installations.
4 5
PAG. 10PAG. 11
DOORCLOSERS
PAG. 22
HANDLES
PAG. 21
CYLINDERS
PAG. 22
SPECIAL STRIKES
PAG. 17
2
P
ESCUTCHEONS
PAG. 19
2
PA
2
PA
INDEX OF APPLICATIONS
SLIDING DOORS 2240 series SERIES
CHANNELLED ALUM. STILESSwinging bolt series
PAG.12 PAG. 14
FLAT TYPE2210D sliding deadbolt
EMERGENCY EXITS2280 series
ELECTRIC STRIKES
PAG. 16
4 5
2220 SERIES
PAG. 14
2230 L / P SERIES
PAG. 7
2210X SERIES
PAG. 9
2200 SERIES
PAG. 13
2230X - 2230U SERIES
PAG. 6
2210D AND 2210E SERIES
PAG. 12
2210B SERIES
PAG. 11
PAG. 14
2230 SERIES
PAG. 8
2240 SERIES
PAG. 10
2280 SERIES- PANIC EXIT
6 7
» Gear Mechanism · It allows a smooth operation of the
lock. · It reduces the risks of failure of the
lock. » Three independent locking points. · It is necessary to break the three
points one by one to force the lock. · Reinforced bolts. » The cases, with 15mm of wide, reduce the aluminium mechanization.» Flat profi le faceplate or “U” profi le faceplate. » Faceplate length of 2030mm.» Faceplate and strike plates made in stainless steel. » Nickel plated steel deadbolts and latch.» Nickel plated latch is reversible and can be retracted by handle or key.
PREMIUM LOCK, GEAR MECHANISM
3 lock points - sliding reinforced bolts
2230X - 2230U SERIES
OPTIONS
Backsets 25 30 35
Cylinder cam 15 mm
Latch Adjustable Anticard Narrow
Face plate Flat “ U”type
ACCESORIOS
Escutcheons E190 E205 E240
Strikes Inox Electric Adjustable
A=backset + 15 mm
174
A
793
85
311
2030
A
643
1100
174
A
ANTICARD LATCH
ADJUSTABLE LATCH
2230X / ULatch + Bolt
2231X / UBolts only
2236X / URoller + bolts
NEW
6 7
2230 L/PEntrance
door.Latch+hook.
2231Entrance door.Hook only.
2236Double actionentrance door. Roller + hook.
L: 29P: 33
18
14
10
20
24
1860
28
26
75
120
548
242
548
120
207
1860
174
55
85
34
L: 21/26P: 25/30/35
L: 34/39P: 38/43
12
26
56
30
50
12
29,5
26
P: 2,5L: 6
2230 LApplication in fl at stiles
2230 PApplication in channelled stiles
3 lock points - swinging hook lock
2230 L / P SERIES » Faceplate and strike plates made in stainless steel.» Nickel plated steel bolts, main hook and latch. » Nickel plated latch is reversible and can be
retracted by handle or key.» The hook in the main lock is built with two
tempered steel plates and reinforced swinging mechanism.
» Model 2230L is designed for fl at stiles. The connecting rods slide inside the U-profi le faceplate.
» Model 2230P is designed for channelled stiles. The connecting rods slide inside the stile channel.
» Three different functions available, see below.» Two E-190 cylinder oval roses included. (E210
escutcheon can be ordered optionally.» There is a complete range of special strikes for
the existing types of aluminium stiles in the market.
OPTIONS
Backset(L/P) 21/25 26/30 31/35
Cylinder cam 13 mm 15 mm
Latch Standar Adjustable Narrow
Front plate Flat “ U” type
ACCESSORIES
Escutcheons E190 E205 E210 E240
Strikes Inox T21 Electric Adjustable
�
�
�
������
��
���
������
8 9
MULTIPOINT SECURITY
2,5
26
56
25
20253035
33384348
85
34
174
2230Entrance door.
Latch+bolt.
2231Entrance door.Bolt only.
2236Double action entrance door. Roller + bolt.
2237Inactive doors.Top jamb & fl oor locking only.
swinging bolt + top jamb + fl oor locking points
2230 SERIES» Faceplate and strike plates made in stainless steel.» Nickel plated steel bolt with reinforced swinging
mechanism. » Bolt throw is 25mm. and top-jamb&fl oor throw is
15mm.» Nickel plated latch is reversible and can be
retracted by handle or key.» Distance between centres: 85mm.» Two threaded connecting rods for top-jamb and
fl oor locking by means of M8 threaded bars. The M8 threaded bars are not supplied.
» Top jamb and fl oor locking zones can be reinforced with hardened steel locking bolts that have an inner thread to match the M8 bars: PAB2230.
» Door installation can be enhanced by means of the GUARPOHC fl oor strike.
» 2237 model is the ideal option for inactive leaf locking in double leaf doors.
» There is a complete range of special strikes for the existing types of aluminium stiles in the market.
OPTIONS
Backsets 20 25 30 35
Cylinder cam 13 mm 15 mm
Latch Standar Adjustable Narrow
ACCESSORIES
Escutcheons E190 E205 E210 E240
Strikes Inox T21 Electric Adjustable
GUARPOHC
8 9
.
e
.
e
Gear mechanism
2210X SERIE
OPTIONS
Backsets 25 30 35
Cylinder cam 15 mm
Latch Adjustable Anticard Narrow
ACCESSORIES
Escutcheons E190 E205 E240
Strikes Inox Electric Adjustable
» Gear Mechanism · It allows a smooth operation of the lock. · It reduces the risks of failure of the lock. » The cases, with 15mm of wide,
reduce the aluminium mechanization.» Faceplate and strike plate made in
stainless steel. » Nickel plated steel deadbolt and
latch.» Nickel plated latch is reversible and
can be retracted by handle or key.
2210XLatch + Bolt
2211XBolts only
2216XRoller + bolts
ADJUSTABLE LATCH
ANTICARD LATCH
NEW
10 1
11,5
26
56
29,5
83,5
10
14
25,4
2,5
8
85
34
33
174
20/25/30/35
33/38/43/48
7,5
14
240225
5 7
25
2240Entrance door.Latch+hook.
2241Entrance door.Hook only.
2241CEntrance sliding
door.Hook only.
2246Doubleactionentrance door. Roller + hook.
Swinging bolt
2240 SERIES » Faceplate and strike plate made in stainless steel.
» Solid steel hook bolt includes two tempered steel plates and reinforced swinging mechanism.
» Nickel plated latch is reversible and can be retracted by handle or key.
» Distance between centres: 85mm.» Four different functions available, see below.» Two E-190 cylinder oval roses included.
(E210 escutcheon can be ordered optionally).
» There is a complete range of special strikes for the existing types of aluminium stiles in the market.
OPTIONS
Backset 20 25 30 35
Cylinder cam 13 mm 15 mm
Latch Standard Adjustable Narrow
ACCESSORIES
Escutcheons E190 E205 E210 E240
Strikes Inox T21 Electric
0 11
45
26
56
29,5
83,5
2,5
11,5
25
855
174
85
34
Backset
Backset + 15
14
24060,7
25
ø5,3
» Faceplate and strike plate made in stainless steel.
» Nickel plated steel bolt with reinforced swinging mechanism. Bolt throw: 25mm.
» Distance between centres: 85mm.» Seven different functions available, see
below.» Two E-190 cylinder oval roses included.
(E210 escutcheon can be ordered optionally).» There is a complete range of special strikes
for the existing types of aluminium stiles in the market.
E210 escutcheon
Mortise lock
Door leaf stile
Cylinder
T21 special strike for channelled stiles.
Door frame stile
SWINGING BOLT SERIES
Reinforced swinging mechanism
2210Entrance
door.Latch+bolt.
2211Entrance door.Bolt only.
2214Latch + thumbturn.
2215Pass doorLatch only.
2216Double action entrance door. Roller + bolt.
2218Double action Pass door. Roller only.
2219Entrance door. Key actuated latch.
2210B SERIES
OPTIONS
Backsets 20 25 30 35
Cylinder cam 13 mm 15 mm
Latch Standard Adjustable Narrow
ACCESORIES
Escutcheons E190 E205 E210 E240
Strike Inox T21 Electric Adjustable
12 1
» Faceplate and strike plate made in stainless steel.» Nickel plated steel deadbolt. » Nickel plated latch is reversible and can be retracted by
handle or key.» Distance between centres: 85mm.» Galvanised steel lock case.» Two anodised aluminium roses included . (E190 or E210
escutcheons can be ordered optionally.» The standard stainless steel strike is supplied with the
lock.
SLIDING DEADBOLT
2210EntrancedoorLatch+bolt.
2211Entrance door.Bolt only.
2216Double action entrance door. Roller + bolt.
2214Latch + thumbturn.
45
26
48,3
45,5
42,2
33
55
85
34
33
20/252,5
33/38
25ø 5,3
13,2
12,5
7,5
14
9
27,6
240
Anodised aluminiumroses
CA22 special strike.
Door leaf stile
Door frame stile
Cylinder
2215Pass doorLatch only.
2218Double action Pass door. Roller only.
2210E ,15 mm width
2210D AND 2210E SERIES
Backsets 20 25 20 25 30 35
Cylinder cam 13 mm 13 mm
Latch Standard Narrow Adjustable
ACCESSORIES
Escutcheon E190 E205
Strikes Inox Electric Adjustable
2210D 2210E
NEW
2 13
The multipurpose lock for sliding doors and windows.
» The hook is specially designed for sliding doors.
» Backset is 16,5 mm. Backset is measured from the faceplate interior to the cylinder & follower centre-line.
» Cross key type cylinder. Locks are supplied with three keys.
» Strike plate and a pair of key-guide plastic roses are standard equipment.
» Nickel plated faceplate, strike plate and hook. » Painted steel lock case.
Backset 16,5 mm
2270 SERIE
» Nickel plated faceplate, latchbolt, deadbolt and cylinder.
» Latchbolt is reversible.» Oval cylinder cam has
10,7mm. radius to prevent interference with the stile bottom
» Distance between centres: 70mm.
» Strike and roses are not supplied.
240
25
35
10
12
11,5
22,53
70 158
10
10
14
23
Backset 11,5 mm
2220 SERIE
» Galvanised faceplate plus an anodised aluminium faceplate supplement.
» Latchbolt, deadbolt and cylinder are nickel-plated.
» Latchbolt is reversible.» Distance between centres:
65mm.» Two anodised aluminium
roses included» Four different functions,
see below.» There is no strike plate
supplied.
2200 SERIE
Backset 13,5 mm
10
15
23
27
13,5
65 173
30
25
217
3 2
11
11
10
14 1
PANIC LOCKS
Description of panic functions
» Distance between centres is 92mm.» Backsets availble: 22, 27, 32, 37 and
42mm.» Follower 9mm. » Right or left hand must be indicated.» Panic B and Panic C functions
available.» Optionally they can be ordered
without panic function.» Faceplate and strike-plate are
stainless steel (AISI 304)» Closed, galvanised steel lock case.» 100% of parts manufactured with
fi re-resistant materials. Fire Certifi ed according with DIN 18251.
» Designed to work with euro-profi le cylinders.
2280 SERIE
SINGLE LEAF DOORS
PANICFUNCTIONS
» A complete range of panic locks for doors opening outwards.
» Lock hand must be indicated. See handing criteria below.
» The handle from the interior will always retract both latch and deadbolt.
PANIC C:
» Standard follower.» The latch can be retracted by key.» They are installed with handle on the interior and pull-knob on the exterior.
PANIC C APPLICATIONS:» Deadbolt locking: Access denied,
except for key owners.» Latchbolt locking: - Controlled access with electric strike
LOCK HANDING CRITERIA
Right hand Left hand
OUTSIDE OUTSIDE
245
38,5
36
70
35
12
11
22,5
9
3
A 15
55
23
74
92
200
24
A= 22/27/32/37/42 mm
PANIC B:
» Split follower.» The latch can not be retracted by key.» They are installed with handle on both sides.Access from the exterior is made inthree steps:» Deadbolt is retracted with the key
(One turn). » The key is turned an additional 1/4
turn.» Latch is retracted with the handle in
the exterior.If the key is extracted after the fi rst step, the handle in the exterior will not retract the latch.Extracting the key after the second step leaves the entrance as a pass door.PANIC B APPLICATIONS:» Deadbolt locking: Access denied,
except for key owners.» Latchbolt locking: - Controlled access with electric strike - Pass door
4 15
2282 Y 2283 SERIE
d
2282 lock
» Panic lock designed for the ACTIVE door in double leaf exit doors.
» Panic B and Panic C functions available.
» The faceplate is 400mm. long and possesses the trigger to release the automatic locking in 2283 counterlock.
» Designed to work with euro-profi le cylinders.
400
146
36
70
35
133
11
12
2
2,5
13
26,5
22 48130
9
6
A 15
55
23
74
92
20024
A= 22/27/32/37/42 mm
2283 counter lock
» Panic counter lock designed for the INACTIVE door in double leaf exit doors.
» When the follower is turned from the interior, the top jamb & fl oor locking points are retracted and, simultaneously, both latchbolt and deadbolt are pushed into the 2282 lock, thus letting free exit through the complete double leaf door.
58
164
126
61
121
38
ø 19M10
40
1,6
9
6
A15
23
3
41
M10ø 19
374 40013
A=22/27/32/37/42 mm
M10 threaded connections for Top jamb & fl oor automatic locking rods
Automatic locking trigger in the INACTIVE door
Latchbolt and deadbolt pushing plates
Panic follower in the interior.
Locking activator
Euro-profi le cylinder(Not included)
2283Inactive door
2282 Active door
COMMON FEATURES» Distance between centres is 92mm.» Backsets availble: 22, 27, 32, 37 and 42mm.» Follower 9mm. » Right or left hand must be indicated.» Faceplate and strike-plate are stainless steel (AISI 304)» Closed, galvanised steel lock case.» 100% of parts manufactured with fi re-resistant materials.
Fire Certifi ed according with DIN 18251.
WAY OF WORKINGWhen the ACTIVE door shuts, the faceplate of the 4282 lock releases the trigger on the 4283 counter lock and this way top jamb & fl oor locking points are thrown, locking the INACTIVE door.When the INACTIVE door is opened from the interior with the handle, the top jamb & fl oor locking points are retracted and, simultaneously, both latchbolt and deadbolt are pushed into the 4282 lock, thus letting free exit through the complete double leaf door.TESA recommends to complete the double leaf installation with a Yale 4000 series closing system for double leaf doors, which feature automatic door co-ordination and comply to Fire door standards.
HAND OF DOUBLE LEAF DOOR
Right hand Left hand
OUTSIDE OUTSIDE
Inactive ActiveActive Inactive
DOUBLE LEAF DOORS
16 1
» Power source required: 12Volt. AC; 0.6 Amp.
» Non-Fail-Safe operation: Strike unlocks when energised. If a power failure occurs, the door remains locked.
» Strikes with special characteristics can be served upon request : Fail-Safe operation and DC power source (strike locks when energised) or other special power source specifi cations.
» All the range complies with European Electromagnetic Compatibility Standard
(89 / 336 / CEE).» Stainless steel faceplates.» Short faceplate models are intended for
use with latchbolt-only locks : 4219, 4239 and passage door locks.
» Long face plate models are intended for use with all the range of TESA locks featuring either sliding deadbolt, swinging deadbolt, roller-bolts or hook.
» Latch keeper in any model features horizontal adjustment for perfect latch fi tting: a 4mm. play is allowed.
ELECTRIC STRIKES
4 mm
Electric strikes with adjustable latch keeper
CER MORTISE SERIES
17,5
20
16
5
55 68
20
17,5
16
55 68
11
67 92,7
25
11
250
11
11
13
90
107
25
145,5 160
6 17
» The wide range of special polyamide strikes allows perfect fi tting to the vast majority of aluminium stiles in the market.
» Their glass-fi bre reinforced polyamide construction assures a smooth latch sliding and high durability.
» T21 model, which is manufactured in a metallic alloy for higher resistance, is the perfect choice for channelled stiles. (See application picture below)
SPECIAL STRIKES
1 - One piece required 2 - Two pieces required 3 - Three pieces required
T21 105 10M
T21 105 11M
T30 105 10
T30 105 11
T30 105 40
T30 105 41
T30 085 10
U29 102 10
U29 102 11
U29 102 40
U29 102 41
U30 133 10
U30 130 11
U30 133 40
U30 133 41
2210
B
2211
B
2230
2231
2230
L / 2
230P
2231
L
2231
P
2230
LB /
2230
PB
2240
2241
1 1 1 1
1 1 2 3 3 2
1 1 1
1 1 2 2 2 2
1 1
1 1 1
1 1
1 1 1
1 1 2 2 2 2
1 1
1 1 1
1 1 1
1 1 2 2 2 2
1 1
1 1 1
29
111,5
5
10
T2
11
05
10
R
T2
11
05
11
R
T3
01
05
10
30
15
5
10
1,5
T3
01
05
11
T3
01
05
40
T3
01
05
41
U2
91
02
10
29
U2
91
02
11
U2
91
02
40
U2
91
02
21 25
2,5
10
T3
00
85
10
T3
00
85
11
T2
11
05
40
R
T2
11
05
41
R
30
241,5
5
8
U3
01
33
10
30
U3
01
33
11
U3
01
33
40
U3
01
33
41
25
3,5
10
Polyamide strikes for special applications
T21 / T30 / U29 / U30
60
18 1
ADJUSTABLE STRIKES
Specifi c for european chamber
» Strike material; stainless steel.» Specifi c design for Normalized aluminium profi les.» Lateral regulation of 6mm (+3, -3).
Ref.
CRE2210AI
CRE2216AI
CRE2230AI
CRE2240AI
CRE2246AI
CRE2240EI
CRE2210XI
CRE2230XI
LOCK
2210B
2216 / 2210 EURO
Aux locks 2230P
2240 / 2230L / P
2246
2240 EURO / 2230P EURO
2210X / 2230X
Aux. locks 2230X
FINISH
AI
AI
AI
AI
AI
AI
AI
AI
PACK
5
5
5
5
5
5
5
5
Attachment for channel fi xing
Stainless steel plate
Lateral adjustment screw (6 mm)Rapid fi xing screw
3 mm 3 mm
Rapid fi xing system
» Metallic alloyed strikes» Specifi c design for Normalized aluminium profi les » Strike width 21 mm, » Strike thickness 5 mm
Model
T2110510R
T2110511R
T2110540R
T2110541R
LOCK
2210B/2216B/2210B y 2216B EURO
2211B/Aux locks 2230P/2230P EURO
2240 y 2246 EURO/2230P and 2236P EURO
2241 EURO/2231P EURO
FINISH
NE
NE
NE
NE
PACK
10
10
10
10
» Metallic alloyed strikes» Specifi c design for Normalized aluminium profi les » Lateral regulation of 6mm (+3, -3).
Model
T2110510G
T2110511G
T2110540G
T2110541G
LOCK
2210B/2216B/2210B y 2216B EURO
2211B/Aux locks 2230P/2230P EURO
2240 y 2246 EURO/2230P and 2236P EURO
2241 EURO/2231P EURO
FINISH
NE
NE
NE
NE
PACK
10
10
10
10
CRE
T21G
DETAIL OF THE FIXATION SYSTEM
T21R
8 19
» The new cylinder escutcheon, the E240, offers design and security.
» 2 tempered plates protects the cylinder from direct attacks using drill, offering the same security level that the cylinder escutcheons used in Tesa security doors.
» The metallic alloyed cover offers to the set a protective function anti jaw .
» The fi xation of the cylinder escutcheon to the door is made with hidden screws.
ESCUTCHEONS
Security escutcheons
E240 ESCUTCHEON
» Designed for its simple and fast installation.» The installation does not require screws that go through
the lockcase; the cylinder rose is placed riveting the plate to the profi le.
Easy installation escutcheon
E205 ESCUTCHEON
» Anti extraction attack cylinder rose manufactured in metallic alloy.
» Nickel plated steel plate in the interior is hidden with a snap-in polyamide cover.
» Very easy installation with bolt through fi xing with M5 screws.
» Finishes : Black, white, polished brass plating, satin chrome.
Anti extraction attack
E210 ESCUTCHEON
» Nickel plated steel plates are hidden with snap-in polyamide covers.
» Finishes : Black and white.
Steel plates escutcheon
E190 ESCUTCHEON
20 2
ACCESORIES
Complement for 2230 series locks
GUARPOHC FLOOR STRIKE» Floor strike for bottom locking in 2 230 series locks.» It possesses a spring-loaded protective lid that prevents
dust from getting into the strike hole.» Nickel plated fi nish.
PAB2230 LOCKING BOLTS» Hardened steel top jamb & fl oor locking bolts. (Set of two
units).» M8 interior thread.
98
727,5
10
32
22 34
ø 5
22
12
30
M8
FOLLOWER REDUCTION SQUARE SLEEVES
Follower adaptation
» Zinc plated steel square sleeves.
7 8
18
6 8
18
8 9
8
44700NM7mm. spindle into
8mm. Follower
adaptation.
44600NM6mm. spindle into
8mm. Follower
adaptation.
44900NM8mm. spindle into 9mm. Follower adaptation.
0 21
NYLON HANDLE SETS FOR ALUMINIUM STILE DOORS
Steel soul
» 8mm. spindle & follower.» Nylon handles with galvanised steel
reinforced core.» Nylon oval rose.» Direct fi xing to door with tapping
screws.
29,5
120
ø 20
MNRO800NE
MNRO800BL
M2000 SERIE
¿White or Black?
» Set.» Oval rose.» 2 springs.» 8 mmspindle.» 4 screws per lever.
M2000NE
M2000BL
67 45
31
1/48
125 51 12
MNRO800 SERIE
ALUMINIUM SERIES
Range of fi nishes
» Set.» Oval rose.» 2 springs.» 8 mm spindle.
30
113
ø 20
MS Y MV SERIES
F2 Champagne
F1 Silver
F3 Gold
F4 Light bronze
F5 dark bronze
F6 Stainless steel
AN Black
AB White
M2000 SERIE
22 2
CYLINDERS
Customized masterkeying
» As befi ts our position as a leading European cylinder manufacturer, TESA offers a range capable of adapting to any requirement:
» The choice of a cylinder is based on various criteria:Degrees of security» Cylinders with a restricted, patented key; if the key is
lost, we can be sure that no copies will be made without the owner’s permission.
» Reversible dimple key.» Sawn key.Masterkeying capacity» It makes things easier for the user, as it allows one key to
open several cylinders, even if each cylinder has its own key.
» A masterkeying is a planned locking system in which the master key can open more than one cylinder, even if each cylinder has its own key.
» For offi ces, residential homes and plants of various sizes, masterkeying is a secure and comfortable solution that reduces the number of keys that must be handled: security and comfort.
Several sizes» All kinds of sizes and models: eccentric/center (30/30),
eccentric/off-center (30/40, 30/45, 35/35, etc.), 13’2/15 mm radium, half cylinders (30/10), push-button cylinders, etc.
Standards» This range conform to current European standards (EN
1303, DIN, etc.).
DOOR CLOSERS
Security and comfort
» A complete range for every situation that requires a door closer: from models for light architectural doors in aluminium or PVC to systems for RF doors with a double leaf, integrated lock selector and electromagnetic retention. There also exists a whole range of accessories for equipping simple/double operation doors (including glass doors).
» TESA’s door closers (except CT 1000) have been certifi ed by the EN 1154 standard, according to the European regulation 89/106/CEE and the Spanish standard for buildings NBE-CPI 96 art. 15.5.5.
CTSU200
CT1000
CT2500 CT3000
CT2000
CT2200BRI
BVI
2
2 23
NOTES
23
ASSA ABLOY, is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.
Abril 2009 - Depósito Legal BI-503-07
Talleres de Escoriaza, S.A.U. Barrio Ventas, 35 · E-20305 Irun · Guipúzcoa
Tel. +34 943 669 100 Fax: +34 943 633 221
www.tesa.es
LO
CK
S F
OR
NA
RR
OW
ST
ILE
S