Duo High Security Cam Locks - illinoislock.com. 2 – For all 90 turn locks with key withdrawal in...
8
● Pick resistant lock ● Stainless steel guides to deter drilling ● 14 tumbler triple bitted keyway ● Positive tumbler operation provides for mechanical movements of the tumblers without the aid of springs. The feature reduces failures caused by dirt, corrosion or freezing. ● 14,000 primary keys available, 200 master keys, 30 grand master keys ● Stainless steel ring between plug and barrel for pull resistance ● Triple bitted keys with side serratures controlling secondary tumblers not duplicable on standard machines Part Number B-Dimension Screw Mounted Cam Inches Millimeters SD6416E 5/8 15.9 SD6416G 27/32 21.4 SD6416H 1-3/32 27.8 SD6416L 1-11/32 34.1 Nut Mounted Cam Inches Millimeters SD6417E 5/8 15.9 Fixed Cam Inches Millimeters SD6412E 5/8 15.9 * length tolerance +/- .039” [1mm] 1 www.illinoislock.com • [email protected] • 847-537-1800 Rev 0 4/31/2015 Lock Assembly Mounting Nut Cam Cam Screw Duo High Security Cam Locks SD6416 Formed Out Cam Formed In Cam Straight Cam .868 [22.05] [B-Dimension]
Transcript of Duo High Security Cam Locks - illinoislock.com. 2 – For all 90 turn locks with key withdrawal in...
● Pick resistant lock
● Stainless steelguides to deterdrilling
● 14 tumbler triplebitted keyway
● Positive tumbleroperation providesfor mechanicalmovements of thetumblers without theaid of springs. Thefeature reducesfailures caused bydirt, corrosion orfreezing.
● 14,000 primary keysavailable, 200master keys, 30grand master keys
● Stainless steel ringbetween plug andbarrel for pullresistance
● Triple bitted keyswith side serraturescontrollingsecondary tumblersnot duplicable onstandard machines
Part Number B-Dimension
Screw Mounted Cam Inches MillimetersSD6416E 5/8 15.9SD6416G 27/32 21.4SD6416H 1-3/32 27.8SD6416L 1-11/32 34.1
Nut Mounted Cam Inches MillimetersSD6417E 5/8 15.9
Fixed Cam Inches MillimetersSD6412E 5/8 15.9
* length tolerance +/- .039” [1mm]
1www.illinoislock.com • [email protected] • 847-537-1800
Rev 04/31/2015
Lock Assembly
Mounting Nut
Cam
Cam Screw
Duo High Security Cam LocksSD6416
Formed OutCam
Formed InCam
Straight Cam
.868[22.05]
[B-Dimension]
2
Cam Rotation and Installation
.760`0.002[19.30`0.1] DIA.
[ ]+0.003.633 - 0.000
16.08 - 0.0+0.1
90°
180°
90°
180°
www.illinoislock.com • [email protected] • 847-537-1800
FIXED CAMSCREW TYPE NUT TYPE
.760`0.002[19.30`0.1] DIA.
[ ]+0.003.692 - 0.000
17.58 - 0.0+0.1
Figure 2Figure 1
Fig. 1 – For all 180 turn locks. For all 90 turn locks with keywithdrawal in locked position only.
Fig. 2 – For all 90 turn locks with key withdrawal in locked andunlocked position
Duo High Security Cam LocksSD6416
Material and Finish
Housing: Zinc Alloy
Finish: Bright ChromeUS26 (Standard)
Satin Nickel US15 orBlack E-Coat(Optional)
Cam Types
3
* length tolerance +/- .039” [1mm]
www.illinoislock.com • [email protected] • 847-537-1800
Duo High Security Cam LocksSD6416
Straight Cams
Part Number Cam Length [D-Dim]*Inches Millimeters
S2202-13 7/8 22.2S2202-17 1 25.4S2202-19 1-1/8 28.6S2202-21 1-1/4 31.7S2202-23 1-3/8 34.9S2202-25 1-1/2 38.1S2202-27 1-5/8 41.3S2202-29 1-3/4 44.4S2202-31 1-7/8 47.6S2202-33 2 50.8
CAM LENGTH[D]
CAMWIDTH
3/4”[19.1mm]
CAMTHICKNESS
1/8” [3.2mm].375 SQ.TYP.
Cam Types (Continued)
4
Hook CamsPart Number Cam Length [D-Dim]*
CCW CW Inches MillimetersS2208-13 S2209-13 7/8 22.2S2208-17 S2209-17 1 25.4S2208-19 S2209-19 1-1/8 28.6S2208-21 S2209-21 1-1/4 31.7S2208-23 S2209-23 1-3/8 34.9S2208-25 S2209-25 1-1/2 38.1S2208-27 S2209-27 1-5/8 41.3S2208-29 S2209-29 1-3/4 44.4S2208-31 S2209-31 1-7/8 47.6S2208-33 S2209-33 2 50.8
* length tolerance +/- .039” [1mm]
.375 SQ.TYP.
COUNTERCLOCKWISEROTATION
CLOCKWISEROTATION
www.illinoislock.com • [email protected] • 847-537-1800
Duo High Security Cam LocksSD6416
15/32
1/161/4
CAM LENGTH[D]
CAMWIDTH
3/4”[19.1mm]
CAMTHICKNESS
1/8” [3.2mm]
5
Cam Types (Continued)
www.illinoislock.com • [email protected] • 847-537-1800
Duo High Security Cam LocksSD6416
Formed CamsPart Number
Example: F2202-13-02Cam Base Number - Cam Length - Cam Offset
Formed In Base Number Formed Out Base Number
F2202 F2232
Cam Length [L] Cam Offset [G or H]Cam Length
Number Inches Millimeters Cam OffsetNumber Inches Millimeters
-13 7/8 22.2 -02 1/16 1.6-17 1 25.4 -04 1/8 3.2-19 1-1/8 28.6 -06 3/16 4.8-21 1-1/4 31.7 -08 1/4 6.4-25 1-1/2 37.1 -10 5/16 7.9-27 1-5/8 41.3 -12 3/8 9.5-29 1-3/4 44.4 -14 7/16 11.1-31 1-7/8 47.6 -16 1/2 12.7-33 2 50.8 -18 9/16 14.3
CAMLENGTH
[L]
.375Sq.
CAMWIDTH
3/4”[19.1mm]
CAMTHICKNESS
1/8” [3.2mm]
CAMOFFSET
[H]
CAMOFFSET
[G]
FORMED IN FORMED OUT
Series Standard Accessories/Replacement Parts
www.illinoislock.com • [email protected] • 847-537-1800
Duo High Security Cam LocksSD6416
6
Cam Screw 1/4-28PN: S23032G
Cam Nut 9/32-28PN: S8176
Barrel Nut M19PN: D9868
Flat WasherPN: S2313
Speed-ClipPN: HS6397
Accessories/Replacement Parts
7www.illinoislock.com • [email protected] • 847-537-1800
Duo High Security Cam LocksSD6416
Finger Pull VerticalPN: P9446A
Anchor PlatePN: S2315A
Dust CoverPN: P9748
Finger Pull HorizontalPN: P9446B
Dust Cover VerticalPN: DC200A
Metal Finger PullPN: FP333
Dust Cover HorizontalPN: DC225A
.760`0.002[19.30`0.1] DIA.
[ ]+0.003.692 - 0.000
17.58 - 0.0+0.1
Figure 2
Fig. 2 – For all 90 turn locks with key withdrawal in locked andunlocked position
Listed accessories are compatible with Figure 2 locks only
Accessories/Replacement Parts
8www.illinoislock.com • [email protected] • 847-537-1800
Duo High Security Cam LocksSD6416
Nut LockPN: S9003
PN: S9003A (.625 Flats)
Spur WasherPN: S2302B
PN: S2302D (.625 Flats)
Anchor WasherPN: S6941
PN: S6951 (.625 Flats)
Spur WasherPN: S2302A
PN: S2302C (.625 Flats)
Listed accessories are manufactured in different versions andselected based upon customer application.
Compatible with both Figure 1 and Figure 2 locks
.760`0.002[19.30`0.1] DIA.
[ ]+0.003.633 - 0.000
16.08 - 0.0+0.1
Figure 1
Fig. 1 – For all 180 turn locks. For all 90 turn locks with keywithdrawal in locked position only.
Fig. 2 – For all 90 turn locks with key withdrawal in locked andunlocked position
.760`0.002[19.30`0.1] DIA.
[ ]+0.003.692 - 0.000
17.58 - 0.0+0.1
Figure 2
