3-D Model Instructions - TETRIX® Robotics
3
336 Objective: This guide has been created as a brief introduction to help users: 1. Open 3-D Model files for the Ranger Bot and its extensions from the TETRIX ® Getting Started Guide using Creo Elements/View Express. 2. Rotate images in the 3-D viewer. 3. Access help files in Creo Elements/View Express. Preparation: Navigate to the 3-D Model Installer Tab on the TETRIX Getting Started Guide DVD and install Creo Elements/View Express. Opening the Viewer: The viewer can be opened by right-clicking the 3-D model and selecting Open in Creo Elements/View Express. This will open the viewer as shown below. Upon opening the 3-D Model file from the TETRIX Getting Started Guide DVD, users will see the following screen: Opening Files: 1. Hover over the View-Model tab in the panel on the left side of the screen. 2. Select the image by checking the box beside the model, which runs the program slightly differently. 3-D Model Instructions Additional Guides TETRIX ® Getting Started Guide
Transcript of 3-D Model Instructions - TETRIX® Robotics
336
Objective:
Thisguidehasbeencreatedasabriefintroductiontohelpusers:
1.Open3-DModelfilesfortheRangerBotanditsextensionsfromtheTETRIX®GettingStartedGuideusingCreoElements/ViewExpress.
2.Rotateimagesinthe3-Dviewer.
3.AccesshelpfilesinCreoElements/ViewExpress.
Preparation:
Navigatetothe3-D Model Installer TabontheTETRIXGettingStartedGuideDVDandinstallCreoElements/ViewExpress.
Opening the Viewer:
Theviewercanbeopenedbyright-clickingthe3-Dmodelandselecting Openin Creo Elements/View Express.Thiswillopentheviewerasshownbelow.
Uponopeningthe3-DModelfilefromtheTETRIXGettingStartedGuideDVD,userswillseethefollowingscreen:
Opening Files:
1.HoverovertheView-Modeltabinthepanelontheleftsideofthescreen.
2.Selecttheimagebycheckingtheboxbesidethemodel,whichrunstheprogramslightlydifferently.
3-D Model Instructions
AdditionalGuidesTETRIX®GettingStartedGuide
337
Rotating the Image:
1.ClicktheRotation Modebuttoninthetoppanel.
2.Presstherightmousebuttonanddragthemouseinsidetheviewerscreentorotatethewholeassembly.
3-D Model Instructions
TETRIX®GettingStartedGuideAdditionalGuides
338
3-D Model Instructions
Accessing Additional Help Files in Creo Elements/View Express:
Clickthe question markiconinthetop-rightcornerofthewindow,orpressF1toaccesshelpfiles.
PTC® approves LEGO® Education the ability to distribute Creo Elements/View Express on the contained inbox DVD to be used as part of the user experience set forth by LEGO Education. PTC holds the rights for this application and users will have to accept the license terms as part of the installation. The application can only be used in context to the TETRIX® Getting Started Guide, and no other distribution is authorized.
AdditionalGuidesTETRIX®GettingStartedGuide
