25863 MONOLINK BROCHURES 9.8.13 2. - Albion … Brochure.pdf · ART 731 H Block Screwed Features...
Transcript of 25863 MONOLINK BROCHURES 9.8.13 2. - Albion … Brochure.pdf · ART 731 H Block Screwed Features...
Monolink
Product Information
It’s all at Albion
Monolink General Information
Terminal units connection system
Albion’s Monolink is an innovative and ultra compact valve arrangement that minimizes the time and space required to connect system terminal units to distribution pipe.All the components required for flushing and commissioning the system can be combined in a single assembly that will fit in the tightest corners. Albion’s Monolink assembly incorporates an isolation valve with integral strainer, a drain point, an inbuilt special bypass valve and balancing valve, static or dynamic. Thanks to the isolation valve fitted on the flow side, it is possible to clean and service the strainer without having to drain down the whole system.Only four connections are required and, because the connections are simple union joints, the whole assembly can be adjusted on site for maximum convenience and easy accessibility in the space available.
In every hydronic system for heating or cooling there are terminal units of different styles, such as fan coils, air handlers, radiant ceiling to heat or cool spaces in the building.For accurate functioning of the system each terminal unit needs to be isolated, strained, vented and balanced.Assembling different valves to achieve these features could be rather complicated, due to the large number of components and couplings used to create the connection.The same procedure is requested for all the terminal units existing in the system.It is evident that such operations could take hundreds of working hours, involve high labour costs and lead to risks for possible joint leakage. None the less it requires high logistic organisation to make sure each valve and fitting for the connection is available on site.Albion’s Monolink is a preassembled factory tested valve arrangement, which combines in a unique item all the components needed for a terminal end unit, such as strainer, bypass valve, balancing valve and drain cock, with no need of assembly on site.
Features
• 100% manufactured in Italy• Nominal pressure PN 25• Factory preassembled• Each single unit factory tested• Compact construction• Designed to provide flexible configuration of the system (use of either manual or automatic balancing valves).• Adaptable for a wide range of pipe connections• Easy installation• Integral union joint for easier installation• Minimal pressure drop• Full bore ball valve for easier flushing• Several accessories available to increase performance• 5 years warranty
Traditional Approach
22 Connections
HIGH
LABOUR
Installation TIME
COST
Leakage Risk
Innovation Approach
4 Connections
LOW
LABOUR
Installation TIME
COST
Leakage Risk
Monolink Operation
Flushing and chemical cleaning
Monolink contains all the features required to flush the sys-tem in accordance with Bsria Application Guide AG 1/2001 Pre-Commission Cleaning of Pipework Systems.The flushing procedure should be agreed in advance with the appointed pre-commission cleaning specialist.For most situations, it is envisaged that flushing will take place in three stages.Stage 1 will be a flush and, where appropriate, chemical clean of the main system with terminal unit isolated as shown in picture below.Please note that strainer basket must be removed before commencing the stage 1 flush.Stage 2 and stage 3 will take place after the main system has been cleaned and chemically treated. Clean water from the system will be forward flushed through the units, then reverse flushed in order to dislodge any material trapped in the terminal unit or control valve.Stage 4 after flushing and chemical cleaning, Albion’s Monolink is ready for commissioning and operation in standard position.
Stage 1 Bypass Operation:Flushing of main system
By pass valve: openedIsolating valve: closedStrainer flushing valve: closedBalancing valve: closed
Stage 2 Forward Flush Operation:Forward flushing
By pass valve: closedIsolating valve: openedStrainer flushing valve: closedBalancing valve: opened
Stage 3 Reverse Flush Operation:Reverse flushing
By pass valve: closedIsolating valve: closedStrainer flushing valve: openedBalancing valve: opened
Stage 4 Standard Balancing Operation:Valve commissioning
By pass valve: closedIsolating valve: openedStrainer flushing valve: closedBalancing valve: opened (to be commissioned)
F C U
outlet inlet
1/2
" -
BY-P
AS
S3/4
" -
BY-P
AS
S1"
- B
Y-P
AS
S
20
30
40
50
60
80
0.2
0.3
0.4
0.5
0.6
0.8
8
6
5
4
3
2
1
0.1
10
100
0.80.60.4 208 1021 3 4 60.30.008 0.080.060.040.020.004 0.006 0.01 0.1 0.2
ART 731
H Block ScrewedFeatures
• Screwed BSP F X Union Male
• Body Brass CW 602 N-M
• 5 year guarantee
• Tested to EN12266-1:2003
• Complete with test point & Air vent
Technical Data
Max Range 25 Bar
Working Temperature -10°C to +120°C
DN 1/2” 3/4” 1”
Flow and Pressure Drop
A
B
C
DN DN
E
Ø 15 20 25
A 30 34 37
B 77 82 86
C 96 119 143
E 100 100 150
Kgs 0.79 1.17 1.58
bar
25
20
15
10
5
-10 0 10 20 30 40 50 60 oC70 80 90 100 110 120
Pressure / Temperature
Pres
sure
Dro
p
Flow (i/s)
P
B
A
DN
DN
DN
DN
E
C
Ø
Ø
Technical Data
Max Range 25 Bar
Working Temperature -10°C to +120°C
DN 1/2” 3/4” 1”
Ø 15 20 25
A 30 34 37
B 77 82 86
C 138 165 191
E 100 100 150
Kgs 0.87 1.28 1.74
ART 732
bar
25
20
15
10
5
-10 0 10 20 30 40 50 60 oC70 80 90 100 110 120
Pressure / Temperature
H Block PressFeatures
• ‘M’ Press X BSP Union Male
• Body Brass CW 602 N-M
• 5 year guarantee
• Tested to EN12266-1:2003
20
30
40
50
60
80
0.2
0.3
0.4
0.5
0.6
0.8
8
6
5
4
3
2
1
0.1
10
100
0.80.60.4 208 1021 3 4 60.30.008 0.080.060.040.020.004 0.006 0.01 0.1 0.2
1/2
"x15 -
BY-P
AS
S3/4
"x22 -
BY-P
AS
S
Flow and Pressure Drop
Pres
sure
Dro
p
Flow (i/s)
P
ART 733/25
‘H’ Block Complete with Art 25Features
• Available in BSP & M Press
• Material Brass
• Tested in accordance with EN 12266-1:2003
• 5 year guarantee
B
A
DNDN
E
C
3
1
2
Technical Data
Max Range 25 Bar
Working Temperature -10°C to +120°C
DN 1/2” 3/4” 1”
Ø 15 20 25
A 77 81 91
B 110 129 138
C 170 205 245
E 100 100 150
Kgs 2.06 2.82 4.19
1 Art 25 FODRV
2 Art 731 ‘H’ Block
3 Art 630 Ball Valve, Strainer & Drain Cock
N. Part Name Material
bar
25
20
15
10
5
-10 0 10 20 30 40 50 60 oC70 80 90 100 110 120
Pressure / Temperature
ART 733/28
‘H’ Block complete with Art 28Features
• Available in BSP & M Press
• Material Brass
• Tested in accordance with EN 12266-1:2003
• 5 year guarantee
B
A
DNDN
E
C3
2
1
Technical Data
Max Range 25 Bar
Working Temperature -10°C to +120°C
DN 1/2” 3/4” 1”
Ø 15 20 25
A 77 81 91
B 88 90 92
C 165 200 245
E 100 100 150
Kgs 1.75 2.28 3.59
1 Art 28 VODRV
2 Art 731 ‘H’ Block
3 Art 630 Ball Valve, Strainer & Drain Cock
N. Part Name Material
bar
25
20
15
10
5
-10 0 10 20 30 40 50 60 oC70 80 90 100 110 120
Pressure / Temperature
ART 733/28 Actuated
‘H’ Block complete with Art 28 and ActuatorFeatures
• Available in BSP & M Press
• Material Brass
• Tested in accordance with EN 12266-1:2003
• 5 year guarantee
A
B
A
B DNDN
E
C
3
1
2
Technical Data
Max Range 25 Bar
Working Temperature -10°C to +120°C
DN 1/2” 3/4” 1”
Ø 15 20 25
A 77 81 91
B 95 97 99
C 165 200 245
E 100 100 150
Kgs 1.81 2.35 3.66
1 Art 788 VODRV with Actuator
2 Art 731 ‘H’ Block
3 Art 630 Ball Valve, Strainer & Drain Cock
N. Part Name Material
bar
25
20
15
10
5
-10 0 10 20 30 40 50 60 oC70 80 90 100 110 120
Pressure / Temperature
ART 733/29
‘H’ Block complete with Art 29 Automatic flow Balancing ValveFeatures
• Available in BSP & M Press
• Material Brass
• Tested in accordance with EN 12266-1:2003
• 5 year guarantee
B
A
DNDN
E
C
3
1
2
Technical Data
Max Range 25 Bar
Working Temperature -10°C to +120°C
DN 1/2” 3/4” 1”
Ø 15 20 25
A 77 81 91
B 77 82 86
C 165 200 245
E 100 100 150
Kgs 1.87 2.37 3.67
1 Art 29 Automatic flow balancing valve
2 Art 731 ‘H’ Block
3 Art 630 Ball Valve, Strainer & Drain Cock
N. Part Name Material
bar
25
20
15
10
5
-10 0 10 20 30 40 50 60 oC70 80 90 100 110 120
Pressure / Temperature
ART 733/21/22/23
‘H’ Block complete with Art 21, 22, 23 Presure Independent Control Balancing Valve (PICBV)Features
• Available in BSP & M Press
• Material Brass
• Tested in accordance with EN 12266-1:2003
• 5 year guarantee
Technical Data
Max Range 25 Bar
Working Temperature -10°C to +120°C
DN 1/2” 3/4” 1”
Ø 15 20 25
A 77 81 91
B 80 80 80
C 180 205 245
E 100 100 150
Kgs 2.25 2.75 4.02
1 Art 21, 22, 23 PICBV
2 Art 731 ‘H’ Block
3 Art 630 Ball Valve, Strainer & Drain Cock
N. Part Name Material
bar
25
20
15
10
5
-10 0 10 20 30 40 50 60 oC70 80 90 100 110 120
Pressure / Temperature
3
1
2
Accessories
Isolating CaseART A921
ART 299
ART A921T
Thermal extended Handle. Can be fitted to Art 630 Ball Valve Strainer and drain cock in cooling applications.
Extension Handle fitted with integral thermometer.
Can be adapted to all monolink configurations.
Spare test points.
Produced in association
with Cimberio, a leading
manufacturer of quality
valves, installed in over
65 countries globally..
Distributor
Certificate No. 1437A
Certificate No. 1437B
DistributorDistributor
Certificate No. 1437A
Certificate No. 1437B